IMPLEMENTS
DRAWBAR GPCIRCLE GP
ELECTRICAL AND STARTING SYSTEM
CONVERTER GP-ELECTRICALOPERATOR STATION
SEAT GPAIR CONDITIONER GP
IMPLEMENTS
DRAWBAR GP
#SEBP49830870
521-0137: DRAWBAR GP
For full view, you need register
Parts for your 12K MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3B-8489 | [1] | FITTING-GREASE (1/8-27 PTF) | |
| 2. | 6G-1914 B | [54] | SHIM (0.76-MM THK) | |
| 6G-1915 B | [36] | SHIM (0.25-MM THK) | ||
| 4. | 6G-5442 | [1] | BALL | |
| 5. | 128-9654 | [11] | STRIP-WEAR | |
| 6. | 261-4672 | [1] | CAP (DRAWBAR) | |
| 7. | 261-4673 | [1] | ADAPTER | |
| 8. | 261-4674 B | [4] | SHIM (0.8-MM THK) | |
| 261-4675 B | [6] | SHIM (0.25-MM THK) | ||
| 261-4676 B | [1] | SHIM (0.12-MM THK) | ||
| 11. | 319-2228 | [6] | SHOE-CIRCLE GUIDE | |
| 12. | 333-0960 | [6] | STRIP-WEAR | |
| 13. | 521-0142 | [1] | DRAWBAR & YOKE AS | |
| 13A. | 107-2344 M | [2] | BOSS (M10X1.5X60-MM) | |
| 13B. | 234-7565 | [1] | BLOCK | |
| 13C. | 7Y-6338 M | [1] | BOSS (M10X1.5X70-MM) | |
| 13D. | 8Y-3795 M | [2] | BOSS (M10X1.5X39-MM) | |
| 13E. | 8Y-4489 M | [1] | BOSS (M10X1.5-THD) | |
| 13F. | 9R-2672 M | [6] | BOSS-THREADED (M10X1.5X120-MM) | |
| 13G. | 178-7023 M | [3] | BOSS (M10X1.5X30-MM) | |
| 13H. | 9R-9866 M | [2] | BOSS-THREADED (M10X1.5-THD) | |
| 13J. | 243-1786 | [1] | SHAFT AS | |
| 13K. | 123-7707 | [2] | PLATE | |
| 14. | 147-5112 M | [4] | BOLT (M24X3X150-MM) | |
| 15. | 1D-5119 | [12] | NUT (3/4-10-THD) | |
| 16. | 550-3302 M | [2] | BOLT-HEAD (M20X2.5X80-MM) | |
| 17. | 283-1578 | [20] | WASHER-HARD (22X45X10-MM THK) | |
| 18. | 289-0580 | [12] | SETSCREW (3/4-10X2.5-IN) | |
| 19. | 339-1911 M | [18] | BOLT (M20X2.5X125-MM) | |
| 20. | 3E-5001 | [2] | PIN-SPRING | |
| 21. | 5P-8291 | [5] | BOLT (3/4-16X2-IN) | |
| 22. | 6V-8653 M | [2] | BOLT-SOCKET HEAD (M6X1X40-MM) | |
| 23. | 8T-4123 | [4] | WASHER (22X35X3.5-MM THK) | |
| 24. | 483-0424 M | [4] | LOCKNUT (M20X2.5-THD) | |
| 25. | 8T-4167 | [4] | WASHER-HARD (26X44X4-MM THK) | |
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
#SEBP49830871
5T-4267: SEGMENT-CIRCLE
5T-4267 SEGMENT-CIRCLE
S/N JJA1-UP
S/N JJA1-UP
For full view, you need register
Parts for your 12K MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| (NO SERVICED PARTS) | ||||
#SEBP49830872
171-7186: ACCESSORY GP-CAB
171-7186 ACCESSORY GP-CAB -HIGH PROFILE
S/N JJA1-UP
12-VOLT
PART OF 286-4328 CONVERTER AR-ELECTRICAL
S/N JJA1-UP
12-VOLT
PART OF 286-4328 CONVERTER AR-ELECTRICAL
For full view, you need register
Parts for your 12K MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 117-2311 | [1] | SOCKET-AUXILIARY POWER (12-VOLT) | |
| 2. | 169-3264 | [1] | HARNESS AS-CAB | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 5P-4571 | [2] | TERMINAL-BLADE (14-GA TO 16-GA) | ||
| 9X-0196 | [1] | TERMINAL AS (16-GA) | ||
| 7Y-3952 | [1] | PLUG-CONNECTOR (2-PIN) | ||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 3. | 129-3178 M | [2] | LOCKNUT (M6X1-THD) | |
| 4. | 139-1153 | [1] | PLATE | |
| 5. | 6P-0205 | [2] | SPACER (0.269X0.405X0.656-IN THK) | |
| 6. | 9X-8256 | [2] | WASHER (6.6X12X2-MM THK) | |
| 7. | 7X-7877 E | STRIP-EDGE (7-CM) | ||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP49830873
434-8056: ACCESSORY GP-CAB
434-8056 ACCESSORY GP-CAB
S/N JJA1-10099
12-VOLT POWER PORT
PART OF 434-8346 CONVERTER AR-ELECTRICAL
S/N JJA1-10099
12-VOLT POWER PORT
PART OF 434-8346 CONVERTER AR-ELECTRICAL
For full view, you need register
Parts for your 12K MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 117-2311 | [1] | SOCKET-AUXILIARY POWER (12-VOLT) | |
| 2. | 169-3264 | [1] | HARNESS AS-CAB | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 5P-4571 | [2] | TERMINAL-BLADE (14-GA TO 16-GA) | ||
| 9X-0196 | [1] | TERMINAL AS (16-GA) | ||
| 7Y-3952 | [1] | PLUG-CONNECTOR (2-PIN) | ||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 3. | 129-3178 M | [1] | LOCKNUT (M6X1-THD) | |
| 4. | 139-1153 | [1] | PLATE | |
| 5. | 6P-0205 | [1] | SPACER (0.269X0.405X0.656-IN THK) | |
| 6. | 9X-8256 | [1] | WASHER (6.6X12X2-MM THK) | |
| 7. | 7X-7877 E | STRIP-EDGE (7-CM) | ||
| 8. | 3T-0852 M | [1] | LOCKNUT (M8X1.25-THD) | |
| 9. | 8T-4224 | [1] | WASHER-HARD (8.8X16X2-MM THK) | |
| 10. | 126-5211 | [1] | SPACER (3X15X17-MM THK) | |
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP49830874
518-6854: ACCESSORY GP-CAB
518-6854 ACCESSORY GP-CAB
S/N JJA10100-UP
12-VOLT
PART OF 520-3154 CONVERTER AR-ELECTRICAL
S/N JJA10100-UP
12-VOLT
PART OF 520-3154 CONVERTER AR-ELECTRICAL
For full view, you need register
Parts for your 12K MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 117-2311 | [1] | SOCKET-AUXILIARY POWER (12-VOLT) | |
| 2. | 169-3264 | [1] | HARNESS AS-CAB | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 5P-4571 | [2] | TERMINAL-BLADE (14-GA TO 16-GA) | ||
| 9X-0196 | [1] | TERMINAL AS (16-GA) | ||
| 7Y-3952 | [1] | PLUG-CONNECTOR (2-PIN) | ||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 3. | 516-7916 | [1] | PLATE | |
| 4. | 126-5211 | [1] | SPACER (3X15X17-MM THK) | |
| 5. | 129-3178 M | [1] | LOCKNUT (M6X1-THD) | |
| 6. | 3T-0852 M | [1] | LOCKNUT (M8X1.25-THD) | |
| 7. | 6P-0205 | [1] | SPACER (0.269X0.405X0.656-IN THK) | |
| 8. | 8T-4224 | [1] | WASHER-HARD (8.8X16X2-MM THK) | |
| 9. | 9X-8256 | [1] | WASHER (6.6X12X2-MM THK) | |
| 10. | 7X-7877 E | STRIP-EDGE (3.5-CM EACH) | ||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP49830875
116-2779: ADJUSTER GP-SEAT
For full view, you need register
Parts for your 12K MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9C-5347 | [4] | BOLT (1/2-13X0.75-IN) | |
| 2. | 9V-7943 | [2] | SPRING | |
| 3. | 116-2327 | [1] | SUPPORT AS | |
| 4. | 9C-2177 | [1] | CAP | |
| 5. | 6W-0590 | [1] | LEVER (SEAT ADJUST) | |
| 6. | 3J-5696 | [1] | PIPE | |
| 7. | 4V-7890 | [1] | SPRING | |
| 8. | 6W-0111 | [2] | LINK | |
| 9. | 2L-5893 | [1] | PIN-SPRING | |
| 10. | 4V-7891 | [1] | LATCH AS | |
| 11. | 5B-6172 | [8] | WASHER (9.7X19X0.8-MM THK) | |
| 12. | 2K-4973 | [8] | LOCKNUT (3/8-16-THD) | |
| 13. | 9V-3043 | [1] | LINK AS | |
| 14. | 6W-0108 | [1] | LINK AS | |
| 15. | 116-2016 | [1] | ANGLE AS (LH) | |
| 16. | 116-2015 | [1] | ANGLE AS (RH) | |
| 17. | 6W-1885 | [1] | CHANNEL AS | |
| 9V-7440 | [4] | NUT-WELD | ||
| 18. | 5M-3062 | [4] | BOLT (3/8-16X0.75-IN) |
#SEBP49830876
125-9854: ADJUSTER GP-SEAT
For full view, you need register
Parts for your 12K MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 125-9853 | [1] | BASE AS | |
| 2. | 6W-1497 | [1] | SUPPORT AS | |
| 3. | 6W-1496 | [1] | SUPPORT AS | |
| 4. | 6W-1888 | [1] | SHEET | |
| 5. | 6W-2371 | [1] | PLATE AS | |
| 6. | 6W-3628 | [2] | CABLE | |
| 7. | 8T-9381 | [2] | BOLT (7/16-20X1-IN) | |
| 8. | 8S-4790 | [4] | SPACER (0.459X0.625X0.25-IN THK) | |
| 9. | 4B-5272 | [4] | WASHER (12.7X31.7X2-MM THK) | |
| 10. | 8R-4519 | [4] | LOCKNUT (7/16-20-THD) | |
| 11. | 5V-5262 | [2] | BOLT-SPECIAL | |
| 12. | 4L-6454 | [4] | BOLT (3/8-16X1-IN) | |
| 13. | 5M-2894 | [4] | WASHER-HARD (10.2X18.5X2.5-MM THK) |
#SEBP49830877
173-1028: ADJUSTER GP-SEAT
For full view, you need register
Parts for your 12K MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4V-8256 | [4] | SPRING | |
| 2. | 117-4492 | [1] | ROD | |
| 3. | 136-1544 | [1] | LATCH AS (LH) | |
| 4. | 156-5545 | [1] | LATCH AS (RH) | |
| 5. | 164-4531 | [1] | ROD | |
| 6. | 170-1112 | [1] | PLATE AS | |
| 7. | 170-1114 | [1] | HANDLE (SLIDE ADJUSTMENT) | |
| 8. | 170-1115 | [1] | HANDLE (TILT ADJUSTMENT) | |
| 9. | 132-0338 | [2] | WASHER-PLASTIC (13X31.7X0.8-MM THK) | |
| 10. | 2K-4973 | [2] | LOCKNUT (3/8-16-THD) | |
| 11. | 7X-0608 | [2] | WASHER-HARD (10.2X16X2-MM THK) |
#SEBP49830878
308-5633: AIR CONDITIONER & HEATER GP
308-5633 AIR CONDITIONER & HEATER GP
S/N JJA1-UP
PART OF 289-7545 AIR CONDITIONER GP
S/N JJA1-UP
PART OF 289-7545 AIR CONDITIONER GP
For full view, you need register
Parts for your 12K MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2P-4339 | [1] | NUT-JAM (7/16-28-THD) | |
| 2. | 2V-0099 | [1] | KNOB-CONTROL (FAN SPEED) | |
| 2A. | 2V-0099 | [1] | KNOB-CONTROL (TEMPERATURE CONTROL) | |
| 3. | 3E-0400 | [2] | WHEEL AS-BLOWER | |
| (EACH INCLUDES) | ||||
| 037-4838 | [1] | CLAMP | ||
| 4. | 3E-3890 | [1] | FILM-IDENTIFICATION (FAN SPEED, TEMPERATURE)(AIR CONDITIONER, HEATER) | |
| 5. | 119-9631 | [1] | SWITCH-TEMPERATURE | |
| 6. | 3S-2093 | [4] | STRAP-CABLE | |
| 7. | 3T-3197 | [1] | GROMMET | |
| 8. | 3T-3198 | [1] | GROMMET | |
| 9. | 5P-7803 | [2] | PLUG-BUTTON | |
| 10. | 6P-3236 | [1] | SWITCH AS-ROTARY (FAN SPEED) | |
| 6V-8362 | [5] | SCREW-MACHINE (8-32X0.31-IN) | ||
| 9B-7233 | [5] | LOCKWASHER | ||
| 11. | 6T-5345 | [1] | BUSHING-TERMINAL | |
| 12. | 6T-6708 | [2] | WASHER (7X28.6X4.1-MM THK) | |
| 14. | 8C-3756 | [1] | FILM-IDENTIFICATION (AIR CONDITIONER) | |
| 15. | 8C-4586 | [2] | CLAMP | |
| 16. | 8D-1429 | [1] | LAMP (24-VOLT) | |
| 18. | 8P-5141 | [2] | PLATE-ORIFICE | |
| 19. | 8X-5536 | [1] | COVER | |
| 20. | 8X-5538 | [1] | COVER AS | |
| 8T-3490 M | [4] | NUT-WELD (M10X1.5-THD) | ||
| 21. | 8X-5540 | [1] | COVER | |
| 22. | 422-2152 | [4] | LOUVER AS-VENT (VENT) | |
| 23. | 9G-1950 | [1] | RESISTOR | |
| 24. | 9X-2185 | [4] | SCREW (8-15X0.44-IN) | |
| 25. | 9X-2488 | [4] | CLAMP-HOSE | |
| 26. | 9X-9653 | [1] | COIL AS-EVAPORATOR | |
| 27. | 110-6393 | [1] | PLATE-INSTRUCTION (AIR CONDITIONER) | |
| 28. | 123-4618 | [1] | COVER | |
| 29. | 123-4701 | [1] | SEAL | |
| 30. | 124-1431 | [1] | BRACKET | |
| 31. | 124-1432 | [1] | HOUSING AS | |
| 7T-1099 | [1] | LINK | ||
| 8P-5141 | [2] | PLATE-ORIFICE | ||
| 32. | 124-3137 | [1] | BRACKET | |
| 33. | 124-3138 | [1] | SEAL | |
| 34. | 124-9006 | [1] | SHAFT | |
| 35. | 423-6697 | [1] | SHAFT AS | |
| 4L-5966 | [2] | SETSCREW (10-32X0.25-IN) | ||
| 36. | 125-0438 | [1] | GASKET | |
| 37. | 129-4935 | [1] | SEAL | |
| 38. | 142-4940 | [1] | PLATE AS | |
| 39. | 174-4492 | [1] | COVER | |
| 40. | 174-4971 | [1] | SUPPORT AS | |
| 3E-4304 M | [6] | INSERT-THREADED (M6X1-THD) | ||
| 43. | 177-7858 | [1] | HARNESS AS-HEATER & AIR COND | |
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 3T-3157 | [1] | TERMINAL-BLADE (16-GA TO 20-GA) | ||
| 3T-3158 | [1] | SOCKET-LAMP | ||
| 3T-3159 | [1] | SPRING | ||
| 3T-3278 | [1] | BOOT | ||
| 5P-1475 | [5] | TERMINAL-FORK (14-GA TO 16-GA, NO. 8 SCREW) | ||
| 6D-4161 | [1] | CONTACT | ||
| 6T-6505 | [5] | HOUSING-RECEPTACLE (BLADE, POSITIVE LOCK) | ||
| 6T-6506 | [6] | TERMINAL-BLADE (14-GA TO 18-GA) | ||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9G-3695 | [1] | PLUG-SEAL | ||
| 9W-0844 | [2] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 9W-0852 | [3] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| (INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 44. | 191-0027 | [1] | PAD | |
| 45. | 204-4376 | [1] | CAP-PROTECTIVE | |
| 46. | 238-0415 | [1] | VALVE AS-WATER | |
| 47. | 238-0417 | [1] | CORE AS-HEATER | |
| 48. | 248-6772 | [4] | SCREW-MACHINE (8-16X7.75-IN) | |
| 49. | 255-6261 | [2] | PLATE | |
| 50. | 308-5632 I | [1] | HOSE AS | |
| 51. | 313-6224 I | [1] | HOSE AS | |
| 52. | 385-0244 | [1] | MOTOR AS-BLOWER (27-VOLT, A/C, HEATER) | |
| 9W-0852 | [2] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 53. | 104-2091 | [8] | SCREW-FLAT HEAD (6-20X0.5-IN) | |
| 54. | 129-3178 M | [4] | LOCKNUT (M6X1-THD) | |
| 55. | 130-5300 | [1] | CLIP | |
| 56. | 141-9784 M | [1] | BOLT (M6X1X190-MM) | |
| 57. | 096-6166 | [2] | WASHER-HARD (4.5X9X1-MM THK) | |
| 58. | 3H-2900 | [1] | GROMMET | |
| 59. | 3S-9557 | [8] | SCREW-PAN HEAD (4-40X0.5-IN) | |
| 60. | 4M-6582 | [1] | SEAL-O-RING | |
| 61. | 5C-2890 M | [7] | NUT (M6X1-THD) | |
| 62. | 5P-1075 | [13] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 63. | 5P-9135 | [1] | GROMMET | |
| 64. | 6V-1668 | [2] | WASHER (6.5X29.1X3-MM THK) | |
| 65. | 6V-7728 M | [1] | BOLT (M6X1X45-MM) | |
| 66. | 6V-8801 | [13] | NUT (3/8-16-THD) | |
| 67. | 7T-9793 | [2] | VALVE-CHECK (EVAPORATOR DRAIN) | |
| 69. | 8T-4171 M | [2] | BOLT (M6X1X12-MM) | |
| 70. | 8T-4205 | [15] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 72. | 9M-8406 | [1] | CLIP (LOOP) | |
| 73. | 9X-2040 M | [4] | SCREW-TRUSS HEAD (M10X1.5X25-MM) | |
| 74. | 9X-2041 M | [5] | SCREW-TRUSS HEAD (M10X1.5X20-MM) | |
| 75. | 9X-2045 M | [6] | SCREW-TRUSS HEAD (M6X1X20-MM) | |
| 76. | 9X-7381 | [1] | SEAL-O-RING | |
| 77. | 9X-7382 | [1] | SEAL-O-RING | |
| 78. | 136-1953 E | HOSE (17-CM EACH) | ||
| 79. | 5P-5908 D | SEAL (0.2-M) | ||
| 80. | 5P-5637 D | SEAL (0.2-M EACH) | ||
| 80A. | 5P-5637 D | SEAL (0.1-M) | ||
| 80B. | 5P-5637 D | SEAL (0.9-M) | ||
| 80C. | 5P-5637 D | SEAL (0.8-M) | ||
| 80D. | 5P-5637 D | SEAL (0.5-M EACH) | ||
| 80F. | 5P-5637 D | SEAL (0.4-M) | ||
| 81. | 9X-2126 E | SEAL (21-CM EACH) | ||
| 81A. | 9X-2126 E | SEAL (33-CM EACH) | ||
| 82. | 267-8575 H | TUBE (9-DM EACH) | ||
| 83. | 5C-8312 M | [2] | NUT (M4X0.7-THD) | |
| 84. | 8T-0337 M | [2] | SCREW-MACHINE (M4X0.7X12-MM) | |
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| H | ORDER BY THE DECIMETER | |||
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
#SEBP49830879
437-0701: AIR CONDITIONER & MOUNTING GP
437-0701 AIR CONDITIONER & MOUNTING GP
S/N JJA1-UP
PART OF 437-0686 AIR CONDITIONER AR
S/N JJA1-UP
PART OF 437-0686 AIR CONDITIONER AR
For full view, you need register
Parts for your 12K MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 123-0872 | [1] | PAD | |
| 2. | 191-5236 | [1] | PAD | |
| 3. | 417-6027 Y | [1] | AIR CONDITIONER GP | |
| 4. | 3S-2093 | [1] | STRAP-CABLE | |
| 5. | 5D-1026 | [2] | CLAMP-BAND | |
| 6. | 5M-3062 | [1] | BOLT (3/8-16X0.75-IN) | |
| 7. | 8M-2773 | [2] | CLIP (LOOP) | |
| 8. | 8T-4896 | [1] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| Y | SEPARATE ILLUSTRATION | |||
