282-2472 CONTROL GP-GOVERNOR S/N SZN1-10099 PART OF 437-0626 CAB AR, 348-3018 GENERAL AR 120K MOTOR GRADER



FUEL SYSTEM
CONTROL GP-GOVERNOR
FILTER GP-FUEL
LINES GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
PUMP GP-UNIT INJECTOR HYD
LINES GP-FUEL

MOTOR GRADER 120K MOTOR GRADER SZN
 120K Motor Grader SZN00001-UP (MACHINE) POWERED BY C7 Engine SEBP4985 120K SZN   (2010)

FUEL SYSTEM

CONTROL GP-GOVERNOR
CONTROL GP-GOVERNOR
282-2472 CONTROL GP-GOVERNOR
CONTROL GP-GOVERNOR
512-5911 CONTROL GP-GOVERNOR
 

#SEBP49850200
 

282-2472: CONTROL GP-GOVERNOR

282-2472 CONTROL GP-GOVERNOR
S/N SZN1-10099
PART OF 437-0626 CAB AR, 348-3018 GENERAL AR
i03523481 SEBP4985
2822472 CONTROL GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your 120K MOTOR GRADER:

Pos. Part No Qty Parts name Comments
1. 6V-8183 [1] NUT-FULL (3/8-24-THD)  
2. 2N-9421 B [5] SPRING-DISC  
3. 4D-4064 [1] ROD END (3/8-24-THD)  
4. 5P-9209 [2] BEARING AS-NEEDLE  
5. 7F-0192 [1] BOLT (3/8-16X2-IN)  
6. 7V-0446 [1] CLIP  
7. 8X-3261 [1] LEVER  
8. 116-5710 [1] GROMMET  
9. 130-5300 [1] CLIP  
10. 141-6343 [1] SPRING  
11. 161-7062 [1] HOUSING  
12. 162-8218 [1] GASKET  
13. 162-8219 [1] COVER  
14. 168-8683 [1] SHAFT  
15. 169-0921 [1] ROD END (3/8-24 LH-THD)  
16. 362-2789 [1] ROD  
17. 172-0165 [1] SHAFT  
18. 172-4211 [1] SPACER (10.5X22X50.8-MM THK)  
19. 206-3599 [1] LEVER  
20. 206-3600 [1] LEVER  
21. 207-4927 [1] PEDAL-GOVERNOR CONTROL  
22. 266-1467 Y [1] SENSOR GP-POSITION (ROTARY)  
23. 009-0008 [1] SETSCREW-SOCKET (3/8-16X0.5-IN)  
24. 129-3173 [1] BOLT-12 POINT HEAD (3/8-16X1.25-IN)  
25. 142-0485 M [1] NUT (M10X1.5-THD)  
26. 1B-0676 [1] PIN  
27. 1B-8704 [3] KEY-WOODRUFF  
28. 272-3089 M [1] BOLT (M10X1.5X90-MM)  
29. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
30. 5P-1076 [1] WASHER-HARD (13.5X30X4-MM THK)  
31. 6V-2313 M [2] BOLT (M5X0.8X30-MM)  
32. 6V-8801 [2] NUT (3/8-16-THD)  
33. 8T-0328 [2] WASHER-HARD (5.5X10X1-MM THK)  
34. 8T-4121 [3] WASHER-HARD (11X21X2.5-MM THK)  
35. 8T-4133 M [2] NUT (M10X1.5-THD)  
36. 8T-4136 M [3] BOLT (M10X1.5X25-MM)  
37. 8T-4182 M [2] BOLT (M10X1.5X45-MM)  
38. 8T-4196 M [2] BOLT (M10X1.5X35-MM)  
39. 8T-4226 [1] WASHER-PLATED (10.5X45X3-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP49850201
 

512-5911: CONTROL GP-GOVERNOR

512-5911 CONTROL GP-GOVERNOR
S/N SZN10100-UP
PART OF 516-7917 CAB AR
i06902846 SEBP4985
5125911 CONTROL GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your 120K MOTOR GRADER:

Pos. Part No Qty Parts name Comments
1. 7V-0446 [1] CLIP  
2. 8X-3261 [1] LEVER  
3. 116-5710 [1] GROMMET  
4. 161-7062 [1] HOUSING  
5. 162-8218 [1] GASKET  
6. 162-8219 [1] COVER  
7. 168-8683 [1] SHAFT  
8. 172-0165 [1] SHAFT  
9. 206-3599 [1] LEVER  
10. 206-3600 [1] LEVER  
11. 266-1467 Y [1] SENSOR GP-POSITION (ROTARY)(THROTTLE)  
12. 362-2789 [1] ROD  
13. 512-5912 [1] PEDAL-GOVERNOR CONTROL  
14. 009-0008 [1] SETSCREW-SOCKET (3/8-16X0.5-IN)  
15. 129-3173 [1] BOLT-12 POINT HEAD (3/8-16X1.25-IN)  
16. 130-5300 [1] CLIP  
17. 141-6343 [1] SPRING  
18. 142-0485 M [1] NUT (M10X1.5-THD)  
19. 169-0921 [1] ROD END (3/8-24 LH-THD)  
20. 172-4211 [1] SPACER (10.5X22X50.8-MM THK)  
21. 1B-0676 [1] PIN  
22. 1B-8704 [3] KEY-WOODRUFF  
23. 272-3089 M [1] BOLT (M10X1.5X90-MM)  
24. 2N-9421 B [5] SPRING-DISC  
25. 4D-4064 [1] ROD END (3/8-24-THD)  
26. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
27. 5P-1076 [1] WASHER-HARD (13.5X30X4-MM THK)  
28. 5P-9209 [2] BEARING AS-NEEDLE  
29. 6V-2313 M [2] BOLT (M5X0.8X30-MM)  
30. 6V-8183 [1] NUT-FULL (3/8-24-THD)  
31. 6V-8801 [2] NUT (3/8-16-THD)  
32. 7F-0192 [1] BOLT (3/8-16X2-IN)  
33. 8T-0328 [2] WASHER-HARD (5.5X10X1-MM THK)  
34. 8T-4121 [3] WASHER-HARD (11X21X2.5-MM THK)  
35. 8T-4133 M [2] NUT (M10X1.5-THD)  
36. 8T-4136 M [3] BOLT (M10X1.5X25-MM)  
37. 8T-4182 M [2] BOLT (M10X1.5X45-MM)  
38. 8T-4196 M [2] BOLT (M10X1.5X35-MM)  
39. 8T-4226 [1] WASHER-PLATED (10.5X45X3-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP49850202
 

174-9570: FILTER GP-WATER SEP & FUEL

174-9570 FILTER GP-WATER SEP & FUEL
S/N SZN1-20000
PART OF 190-8977 PUMP GP-FUEL PRM & WATER SEP
i03518200 SEBP4985
1749570 FILTER GP-WATER SEP & FUEL Parts scheme
  For full view, you need register

Parts for your 120K MOTOR GRADER:

Pos. Part No Qty Parts name Comments
1. 326-1644 [1] FILTER AS-WATER SEP & FUEL (PRIMARY)  
1A. 220-8678 [1] SEAL-RING (FUEL, WATER SEPARATOR)  
2. 343-5527 [1] BOWL AS  
2A. 5F-9144 [1] SEAL-O-RING  
2B. 8F-7219 [1] SEAL-O-RING  
 

#SEBP49850203
 

328-2585: INJECTOR GP-FUEL

328-2585 INJECTOR GP-FUEL
S/N KHX18385-UP
PART OF 268-1839 PUMP GP-FUEL INJECTION
i03533880 SEBP4985
3282585 INJECTOR GP-FUEL Parts scheme
  For full view, you need register

Parts for your 120K MOTOR GRADER:

Pos. Part No Qty Parts name Comments
1. 149-5240 [1] RING-BACKUP  
2. 263-8218 [1] INJECTOR GP-FUEL  
3. 293-0730 [1] RING-BACKUP  
4. 109-3207 [1] SEAL-O-RING  
5. 148-2903 [2] SEAL-O-RING  
 

#SEBP49850204
 

387-9427: INJECTOR GP-FUEL

387-9427 INJECTOR GP-FUEL
S/N TX71-UP; KHX18385-UP
PART OF 268-1839 PUMP GP-FUEL INJECTION
i05236952 SEBP4985
3879427 INJECTOR GP-FUEL Parts scheme
  For full view, you need register

Parts for your 120K MOTOR GRADER:

Pos. Part No Qty Parts name Comments
1. 148-2903 [2] SEAL-O-RING  
2. 109-3207 [1] SEAL-O-RING  
3. 149-5240 [1] RING-BACKUP  
4. 293-0730 [1] RING-BACKUP  
 

#SEBP49850205
 

557-7627: INJECTOR GP-FUEL

557-7627 INJECTOR GP-FUEL
S/N TX71-UP; KHX1-UP
PART OF 268-1839 PUMP GP-FUEL INJECTION
i07396554 SEBP4985
5577627 INJECTOR GP-FUEL Parts scheme
  For full view, you need register

Parts for your 120K MOTOR GRADER:

Pos. Part No Qty Parts name Comments
1. 149-5240 [1] RING-BACKUP  
2. 220-0684 [4] SCREW-MACHINE (M3X0.5X40.3-MM)  
3. 293-0730 [1] RING-BACKUP  
4. 109-3207 [1] SEAL-O-RING  
5. 148-2903 [2] SEAL-O-RING  
6. 3E-4354 [2] BALL  
 

#SEBP49850206
 

396-3298: KIT-FUEL PUMP

396-3298 KIT-FUEL PUMP -FUEL TRANSFER PUMP
S/N KHX1-UP
PART OF 384-0607 PUMP GP-UNIT INJECTOR HYD
FOR USE WITH REHS3830
i05659691 SEBP4985
  For full view, you need register

Parts for your 120K MOTOR GRADER:

Pos. Part No Qty Parts name Comments
  3E-8006 M [1] BOLT (M8X1.25X130-MM)  
  390-8589 [1] COVER AS-PUMP  
  7S-5005 [1] DOWEL  
  313-4620 M [4] SCREW-PAN HEAD (M5X0.8X25-MM)  
  239-2402 [3] SEAL-O-RING  
  227-5904 B [1] SEAL-O-RING  
    -OR-
  185-3241 BJ [1] SEAL-O-RING  
  B   USE AS REQUIRED
  J   USE ONLY ON UNIT INJECTOR HYDRAULIC PUMPS WITH A RADIAL SEAL ON THE MOUNTING FLANGE
  M   METRIC PART
 

#SEBP49850207
 

297-4841: KIT-SEAL

297-4841 KIT-SEAL -SINGLE FUEL INJECTOR
S/N SZN1-UP
i05843051 SEBP4985
  For full view, you need register

Parts for your 120K MOTOR GRADER:

Pos. Part No Qty Parts name Comments
  149-5240 [1] RING-BACKUP  
  293-0730 [1] RING-BACKUP  
  109-3207 [1] SEAL-O-RING  
  148-2903 [2] SEAL-O-RING  
 

#SEBP49850208
 

313-3967: LINES GP-FUEL

313-3967 LINES GP-FUEL
S/N TX71-UP; KHX1-UP
PART OF 325-9707, 395-0485, 539-8081, 539-8082 ENGINE AR-COMPLETE
i03500822 SEBP4985
3133967 LINES GP-FUEL Parts scheme
  For full view, you need register

Parts for your 120K MOTOR GRADER:

Pos. Part No Qty Parts name Comments
1. 313-9614 [2] ADAPTER AS  
    (EACH INCLUDES)
  2R-6806 [1] CONNECTOR  
  214-7568 [1] SEAL-O-RING  
2. 232-0343 Y [1] REGULATOR GP-FUEL PRESSURE  
3. 389-3708 [1] PLUG AS  
  214-7568 [1] SEAL-O-RING  
  360-3679 [1] PLUG-CONNECTOR (9/16-18-THD)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP49850209
 

325-7130: LINES GP-FUEL

325-7130 LINES GP-FUEL
S/N SZN1-UP
PART OF 348-3018 GENERAL AR
i03853592 SEBP4985
3257130 LINES GP-FUEL Parts scheme
  For full view, you need register

Parts for your 120K MOTOR GRADER:

Pos. Part No Qty Parts name Comments
1. 3S-2093 [1] STRAP-CABLE  
2. 8T-9655 [6] MOUNT-ISOLATION  
3. 161-9916 [1] ADAPTER AS  
  6V-7420 [1] ADAPTER  
  2M-9780 [1] SEAL-O-RING  
4. 171-6729 [1] VALVE GP-SHUTOFF (MANUAL)  
  3K-0360 [1] SEAL-O-RING  
  8T-0081 [1] VALVE-BALL  
5. 173-7223 [1] ADAPTER AS  
  3J-1907 [1] SEAL-O-RING  
  3J-7354 [1] SEAL-O-RING  
  9X-0261 [1] ADAPTER  
6. 190-8977 Y [1] PUMP GP-FUEL PRM & WATER SEP  
7. 191-1782 [1] SPACER (8.5X12.7X38.2-MM THK)  
8. 191-1783 [2] SPACER (8.5X12.7X87.3-MM THK)  
9. 194-2903 [1] ELBOW AS  
  3K-0360 [1] SEAL-O-RING  
  8T-0119 [1] ELBOW  
10. 213-0064 [1] BASE AS (FUEL)  
11. 234-5013 Y [1] SENSOR GP-TEMPERATURE (FUEL)  
12. 274-6719 [1] SENSOR GP-PRESSURE (FUEL FILTER)  
  3J-7354 [1] SEAL-O-RING  
  237-0227 [1] PLUG AS-CONNECTOR (3-PIN)  
  264-7030 [1] SEAL-CONNECTOR  
13. 275-1253 Y [1] SWITCH GP-PRESSURE (DIFFERENTIAL)  
14. 311-8756 I [1] HOSE AS  
15. 317-1533 [1] TUBE AS  
16. 325-7129 [1] PLATE AS  
17. 328-2786 I [1] HOSE AS  
18. 328-2787 I [1] HOSE AS  
19. 328-2788 I [1] HOSE AS  
20. 030-7962 [1] ELBOW  
21. 033-8248 [1] CLIP (LOOP)  
22. 148-8307 [1] ADAPTER AS  
  3J-1907 [1] SEAL-O-RING  
  5P-8874 [1] ADAPTER  
23. 148-8336 [1] CONNECTOR AS  
  3J-1907 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
  6V-8636 [1] CONNECTOR  
24. 148-8364 [2] ELBOW AS  
    (EACH INCLUDES)
  3K-0360 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
  6V-8625 [1] ELBOW  
25. 153-6258 [1] CONNECTOR AS  
  8T-5050 [1] CONNECTOR  
  3J-1907 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
26. 164-5557 [1] CONNECTOR AS  
  5I-4370 [1] CONNECTOR  
  2M-9780 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
27. 164-5570 [1] UNION AS  
  6V-8397 [2] SEAL-O-RING  
  6V-8730 [1] UNION (FACE SEAL)  
28. 164-5619 [2] PLUG AS  
    (EACH INCLUDES)
  2M-9780 [1] SEAL-O-RING  
  9S-8006 [1] PLUG (7/8-14-THD)  
29. 183-3406 [2] PLUG AS  
    (EACH INCLUDES)
  214-7568 [1] SEAL-O-RING  
  9S-4191 [1] PLUG (9/16-18-THD)  
30. 198-4777 [3] WASHER-HARD (11X25X10-MM THK)  
31. 1F-7567 [1] CLIP (LOOP)  
32. 1R-0762 [1] FILTER-FUEL (ADVANCED EFFICIENCY)  
33. 239-5030 [1] ADAPTER AS  
  9X-2493 [1] ADAPTER  
  3K-0360 [1] SEAL-O-RING  
34. 260-9171 [1] CONNECTOR AS  
  3J-1907 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
  8T-9041 [1] CONNECTOR  
35. 3J-1907 [1] SEAL-O-RING  
36. 5P-4116 [1] WASHER-HARD (8.8X20.5X2-MM THK)  
37. 5P-7462 [3] CLIP (SLOT)  
38. 5P-7463 [3] CLIP (TAB)  
39. 6V-0683 [3] GROMMET  
40. 6V-8397 [1] SEAL-O-RING  
41. 6V-8724 [1] ELBOW  
42. 7X-0579 [6] WASHER-HARD (8.8X25.5X2-MM THK)  
43. 7X-2539 M [2] BOLT (M8X1.25X110-MM)  
44. 8T-4121 [7] WASHER-HARD (11X21X2.5-MM THK)  
45. 8T-4136 M [6] BOLT (M10X1.5X25-MM)  
46. 8T-4137 M [1] BOLT (M10X1.5X20-MM)  
47. 8T-4195 M [1] BOLT (M10X1.5X30-MM)  
48. 8T-4196 M [3] BOLT (M10X1.5X35-MM)  
49. 8T-4200 M [1] BOLT (M8X1.25X16-MM)  
50. 8T-4223 [1] WASHER-HARD (13.5X25.5X3-MM THK)  
51. 8T-6869 M [1] BOLT (M8X1.25X60-MM)  
52. 8C-6959 E HOSE (132-CM)  
  E   ORDER BY THE CENTIMETER
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Caterpillar Parts SIS Catalog 120K :

BASE GP-FUEL FILTER
525-7949 BASE GP-FUEL FILTER
TURBOCHARGER GP
372-3738 TURBOCHARGER GP
TURBOCHARGER GP
359-3731 TURBOCHARGER GP
TURBOCHARGER GP
338-1878 TURBOCHARGER GP
TURBOCHARGER GP
250-7696 TURBOCHARGER GP
PRECLEANER GP
557-8727 PRECLEANER GP
PRECLEANER GP
233-3387 PRECLEANER GP
MUFFLER GP
310-6472 MUFFLER GP
CONTROL GP-GOVERNOR
512-5911 CONTROL GP-GOVERNOR
FILTER GP-WATER SEP & FUEL
174-9570 FILTER GP-WATER SEP & FUEL
INJECTOR GP-FUEL
328-2585 INJECTOR GP-FUEL
INJECTOR GP-FUEL
387-9427 INJECTOR GP-FUEL
INJECTOR GP-FUEL
557-7627 INJECTOR GP-FUEL
396-3298 KIT-FUEL PUMP
297-4841 KIT-SEAL
LINES GP-FUEL
313-3967 LINES GP-FUEL

Truck sale:

Caterpillar 120K2, Construction
115,277 USD 
Caterpillar 120K2, Construction
- motor graders
GMMCO - SOUTH
India
Caterpillar 120K2, Construction
170,000 
Caterpillar 120K2, Construction
- motor graders
GCPL - EAST
India
Caterpillar 120K2, Construction
120,833 
Caterpillar 120K2, Construction
- motor graders
GMMCO - SOUTH
India
Caterpillar 120K2, Construction
123,611 
Caterpillar 120K2, Construction
- motor graders
GMMCO - SOUTH
India
Caterpillar 120K2, Construction
115,277 
Caterpillar 120K2, Construction
- motor graders
GMMCO - SOUTH
India