394-0862 GRADE CONTROL AR -ACCUGRADE S/N SZN1-UP PART OF 394-4973 OPTION AR-GRADE CONTROL Type 2 120K

ELECTRICAL AND STARTING SYSTEM

CONTROL GP-GRADE

0. 394-0862 GRADE CONT
1. 435-1526 GRADE CONT
2. 435-1548 GRADE CONT

ALTERNATOR GP-CHARGING

3. 297-6867 GROUND GP-

HARNESS GP

4. 528-3421 HARNESS AS
5. 323-5592 HARNESS AS
6. 339-5505 HARNESS AS
7. 339-5506 HARNESS AS
8. 461-4541 HARNESS AS
9. 466-2119 HARNESS AS
0. INFORMATION

MOTOR GRADER 120K MOTOR GRADER SZN
120K Motor Grader SZN00001-UP (MACHINE) POWERED BY C7 Engine SEBP4985 120K SZN (2010)

ELECTRICAL AND STARTING SYSTEM

CONTROL GP-GRADE

337-3100 GRADE CONTROL AR

394-0862 GRADE CONTROL AR

435-1526 GRADE CONTROL AR

435-1548 GRADE CONTROL AR

247-6449 MOUNTING GP-GRADE CONTROL

#SEBP49850290

394-0862: GRADE CONTROL AR

GRADE CONTROL AR

394-0862 GRADE CONTROL AR -ACCUGRADE
S/N SZN1-UP
PART OF 394-4973 OPTION AR-GRADE CONTROL
Type 2

i05287672 SEBP4985

For full view, you need register

Parts for your 120K MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[6]	STRAP-CABLE
2.	152-6824	[1]	KNOB AS (BLADE LIFT, RH)(BLADE LIFT)
	8T-8737	[1]	PLUG-SEAL
	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8T-8729	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
3.	152-6825	[1]	KNOB AS (BLADE LIFT, LH)(BLADE LIFT)
	8T-8737	[1]	PLUG-SEAL
	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8T-8729	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
4.	246-6561	[1]	KNOB AS (RH)(BLADE LIFT, LOWER)
	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8T-8729	[4]	PIN-CONNECTOR (16-GA TO 18-GA)
5.	246-6562	[1]	KNOB AS (LH)(BLADE LIFT, LOWER)
	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8T-8729	[4]	PIN-CONNECTOR (16-GA TO 18-GA)
6.	247-6450 Y	[1]	BOSS GP-DRAWBAR (ACCUGRADE)
7.	252-5709 Y	[1]	WIRING GP-GRADE CONTROL (CAB, INDICATOR LAMP)
8.	336-5530 Y	[1]	COVER GP-ACCESS (PLATFORM)
9.	336-9245 Y	[1]	BOSS GP-FRAME (ACCUGRADE)(ACCUGRADE)
10.	336-9255 Y	[1]	WIRING GP-GRADE CONTROL (ACCUGRADE)
11.	346-5641 Y	[1]	ELECTRONICS GP-IMPLEMENT (ACCUGRADE)
12.	254-5960 CY	[1]	MOUNTING GP-GRADE CONTROL (CIRCLE)
13.	352-6310	[1]	BRACKET GP-MOUNTING
	5P-4115	[2]	WASHER-HARD (7.2X19X2-MM THK)
	6V-7357 M	[2]	BOLT (M6X1X25-MM)
	225-3109 M	[4]	SCREW-TRUSS HEAD (M4X0.7X14-MM)
	352-6311	[1]	BRACKET AS
	9R-2672 M	[1]	BOSS-THREADED (M10X1.5X120-MM)
	9X-2032 M	[4]	NUT-WELD (M4X0.7-THD)
14.	130-5300	[4]	CLIP
15.	1V-7368	[2]	SPACER (0.364X0.54X1.06-IN THK)
16.	8T-4896	[2]	WASHER-HARD (10.2X18.5X2.5-MM THK)
17.	9X-2480 M	[2]	BOLT (M6X1X45-MM)
18.	7I-1024 BE		GUARD-HOSE (180-CM)

			PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY
	B		USE AS REQUIRED
	C		CHANGE FROM PREVIOUS TYPE
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP49850291

435-1526: GRADE CONTROL AR

GRADE CONTROL AR

435-1526 GRADE CONTROL AR -ACCUGRADE
S/N SZN1-UP
PART OF 461-2792 OPTION AR-GRADE CONTROL
FOR USE WITH @@@@@437-0650@@@@@, @@@@@437-0677@@@@@, @@@@@435-1515@@@@@, @@@@@435-1551@@@@@, @@@@@435-8241@@@@@, @@@@@434-6591@@@@@
CANNOT BE USED WITH @@@@@437-0660@@@@@

i07641503 SEBP4985

For full view, you need register

Parts for your 120K MOTOR GRADER:

CATERPILLAR SIS

Part No	Qty	Parts name
247-6450 Y	[1]	BOSS GP-DRAWBAR (ACCUGRADE)
336-9245 Y	[1]	BOSS GP-FRAME (ACCUGRADE)
336-5530 Y	[1]	COVER GP-ACCESS (PLATFORM)
562-6370 Y	[1]	ELECTRONICS GP-IMPLEMENT (ACCUGRADE)
434-8341 Y	[1]	WIRING GP-CAB (ACCUGRADE)
434-8050 Y	[1]	WIRING GP-GRADE CONTROL
Y		SEPARATE ILLUSTRATION

#SEBP49850292

435-1548: GRADE CONTROL AR

GRADE CONTROL AR

435-1548 GRADE CONTROL AR -ACCUGRADE
S/N SZN1-UP
PART OF 461-2769 OPTION AR-GRADE CONTROL
FOR USE WITH @@@@@437-0650@@@@@, @@@@@437-0677@@@@@, @@@@@435-1511@@@@@, @@@@@435-1551@@@@@, @@@@@435-8241@@@@@, @@@@@434-6591@@@@@
CANNOT BE USED WITH @@@@@437-0660@@@@@

i07641560 SEBP4985

For full view, you need register

Parts for your 120K MOTOR GRADER:

CATERPILLAR SIS

Part No	Qty	Parts name
382-1612 Y	[1]	BOSS GP-DRAWBAR (ACCUGRADE)
336-9245 Y	[1]	BOSS GP-FRAME (ACCUGRADE)
336-5530 Y	[1]	COVER GP-ACCESS (PLATFORM)
562-6370 Y	[1]	ELECTRONICS GP-IMPLEMENT (ACCUGRADE)
434-8341 Y	[1]	WIRING GP-CAB (ACCUGRADE)
434-8052 Y	[1]	WIRING GP-GRADE CONTROL (ACCUGRADE)
Y		SEPARATE ILLUSTRATION

#SEBP49850293

297-6867: GROUND GP-ELECTRICAL

GROUND GP-ELECTRICAL

297-6867 GROUND GP-ELECTRICAL
S/N KHX18385-27185
PART OF 325-9707 ENGINE AR-COMPLETE

i03497701 SEBP4985

2976867 GROUND GP-ELECTRICAL Parts scheme

For full view, you need register

Parts for your 120K MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	5C-7261 M	[1]	NUT (M8X1.25-THD)
2.	8T-4224	[2]	WASHER-HARD (8.8X16X2-MM THK)
	M		METRIC PART

#SEBP49850294

528-3421: HARNESS AS-CAB

HARNESS AS-CAB

528-3421 HARNESS AS-CAB
S/N SZN10100-UP
MAIN
PART OF 528-3420 WIRING GP-CAB

i07581934 SEBP4985

For full view, you need register

Parts for your 120K MOTOR GRADER:

CATERPILLAR SIS

Part No	Qty	Parts name
374-7463	[3]	CAP-SEAL
374-7465	[1]	CAP-SEAL
374-7467	[1]	CAP-SEAL
6T-6505	[6]	HOUSING-RECEPTACLE (BLADE, POSITIVE LOCK)
6T-8047	[2]	HOUSING-RECEPTACLE (BLADE, POSITIVE LOCK)
155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
155-2265	[4]	KIT-CONNECTING PLUG (8-PIN)
155-2270	[5]	KIT-CONNECTING PLUG (2-PIN)
155-2271	[2]	KIT-CONNECTING PLUG (4-PIN)
155-2274	[3]	KIT-CONNECTING PLUG (6-PIN)
		(EACH PLUG KIT INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
		(INCLUDES PLUG AS, WEDGES & INTERFACE SEAL)
245-7434	[5]	KIT-CONNECTING PLUG (10-PIN)
		(EACH INCLUDES PLUGS, CONNECTOR PLUG & WIRE AS)
102-8804	[1]	KIT-RECEPTACLE (4-PIN)
102-8801	[1]	KIT-RECEPTACLE (12-PIN)
102-8806	[1]	KIT-RECEPTACLE (8-PIN)
		(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
8T-8729	[18]	PIN-CONNECTOR (16-GA TO 18-GA)
9W-0852	[3]	PIN-CONNECTOR (14-GA TO 16-GA)
202-5397	[16]	PLUG
8T-8737	[17]	PLUG-SEAL
185-1860	[15]	SEAL-WIRE
185-1861	[19]	SEAL-WIRE
8T-8730	[58]	SOCKET-CONNECTOR (16-GA TO 18-GA)
9W-0844	[10]	SOCKET-CONNECTOR (14-GA TO 16-GA)
189-3158	[1]	SUPPRESSOR-ARC
204-1297	[4]	TERMINAL AS-BLADE (18-GA TO 20-GA)
		(EACH INCLUDES)
235-4123	[1]	TERMINAL (18-GA TO 20-GA)
6T-6506	[6]	TERMINAL-BLADE (14-GA TO 18-GA)
223-4779	[30]	TERMINAL-BLADE (14-GA TO 16-GA)
6T-8048	[2]	TERMINAL-RECEPTACLE (16-GA TO 20-GA)
2L-8052	[1]	TERMINAL-RING (6-GA, 3/8-IN SCREW)
		-OR-
2L-8060	[1]	TERMINAL-RING (8-GA, 3/8-IN SCREW)
2L-8069	[1]	TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW)
119-3662 E		TUBE-HEAT SHRINK (10.85-MM DIA)(39-CM)
125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM)
125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(40-CM)
155-2258	[1]	WEDGE-PLUG LOCK (12-PIN)
155-2259	[4]	WEDGE-PLUG LOCK (8-PIN)
3E-3377	[1]	WEDGE-RECEPTACLE LOCK (4-PIN)
3E-3389	[1]	WEDGE-RECEPTACLE LOCK (8-PIN)
E		ORDER BY THE CENTIMETER

#SEBP49850295

323-5592: HARNESS AS-CHASSIS

HARNESS AS-CHASSIS

323-5592 HARNESS AS-CHASSIS -RH
S/N SZN1-UP
PART OF 294-3542, 434-8050, 434-8052 WIRING GP-GRADE CONTROL

i04947260 SEBP4985

For full view, you need register

Parts for your 120K MOTOR GRADER:

CATERPILLAR SIS

Part No	Qty	Parts name
274-3775	[1]	CAP-CONNECTOR
165-0017 G		HOSE (76-IN)
155-2271	[2]	KIT-CONNECTING PLUG (4-PIN)
		(EACH INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
174-0503	[1]	KIT-CONNECTING PLUG (3-PIN)
		(INCLUDES PLUG AS, WEDGES & INTERFACE SEAL)
102-8804	[1]	KIT-RECEPTACLE (4-PIN)
		(INCLUDES RECEPTACLE AS & WEDGE)
9X-3401	[4]	PIN-CONNECTOR (16-GA TO 18-GA)
8T-8737	[1]	PLUG-SEAL
9X-3402	[10]	SOCKET-CONNECTOR (16-GA TO 18-GA)
7K-1181	[1]	STRAP-CABLE
368-2370 B		TAPE
368-2369 B		TAPE
311-4859 E		TUBE-HEAT SHRINK (48-MM DIA)(20-CM)
125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(30-CM)
3E-3377	[1]	WEDGE-RECEPTACLE LOCK (4-PIN)
B		USE AS REQUIRED
E		ORDER BY THE CENTIMETER
G		ORDER BY THE INCH

#SEBP49850296

339-5505: HARNESS AS-CHASSIS

HARNESS AS-CHASSIS

339-5505 HARNESS AS-CHASSIS -FRONT FRAME, REAR
S/N SZN1-UP
PART OF 294-3542, 434-8050, 434-8052 WIRING GP-GRADE CONTROL

i04947261 SEBP4985

For full view, you need register

Parts for your 120K MOTOR GRADER:

CATERPILLAR SIS

Part No	Qty	Parts name
6I-4348	[1]	BOOT (40-PIN)
274-3775	[1]	CAP-CONNECTOR
104-6871	[2]	CAP-DUST
126-1774	[2]	COVER-CONNECTOR
111-4875	[2]	HOUSING
155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
155-2256	[2]	KIT-CONNECTING PLUG (12-PIN)
155-2270	[4]	KIT-CONNECTING PLUG (2-PIN)
155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
		(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
155-2260	[2]	KIT-CONNECTING PLUG (3-PIN)
174-0503	[1]	KIT-CONNECTING PLUG (3-PIN)
		(EACH PLUG KIT INCLUDES PLUG AS, WEDGES & INTERFACE SEAL)
102-8802	[1]	KIT-RECEPTACLE (2-PIN)
102-8803	[1]	KIT-RECEPTACLE (3-PIN)
190-7614	[2]	KIT-RECEPTACLE (12-PIN)
		(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
8N-1540	[1]	PIN-CONNECTOR (12-GA TO 14-GA)
8T-8729	[1]	PIN-CONNECTOR (16-GA TO 18-GA)
9W-0852	[2]	PIN-CONNECTOR (14-GA TO 16-GA)
9X-3401	[25]	PIN-CONNECTOR (16-GA TO 18-GA)
126-1767	[3]	PIN-CONNECTOR (14-GA TO 16-GA)
147-1445	[1]	PLUG AS-CONNECTOR (70-PIN)
147-1446	[1]	PLUG AS-CONNECTOR (70-PIN)
		(EACH PLUG AS INCLUDES)
159-9322	[1]	SEAL-O-RING
3R-9965	[1]	PLUG AS-CONNECTOR (8-PIN)
6D-5257	[1]	PLUG AS-CONNECTOR (8-PIN)
290-4752	[1]	PLUG AS-CONNECTOR
8T-8737	[40]	PLUG-SEAL
9X-0141	[1]	PLUG AS-CONNECTOR (40-PIN)
3E-4367	[1]	RING-RETAINING
3E-8557 M	[1]	BOLT (M5X0.8X39.37-MM)
9X-3490	[2]	SEAL-CONNECTOR (40-PIN)
8T-8737	[198]	PLUG-SEAL
9X-1343	[1]	RECEPTACLE AS-CONNECTOR (40-PIN)
129-7164	[1]	RECEPTACLE AS-CONNECTOR (1-PIN)
134-2540	[1]	RECEPTACLE AS-CONNECTOR (3-PIN)
8T-8730	[6]	SOCKET-CONNECTOR (16-GA TO 18-GA)
9W-0844	[4]	SOCKET-CONNECTOR (14-GA TO 16-GA)
9X-3402	[61]	SOCKET-CONNECTOR (16-GA TO 18-GA)
126-1768	[8]	SOCKET-CONNECTOR (14-GA TO 16-GA)
3S-2093	[2]	STRAP-CABLE
7K-1181	[5]	STRAP-CABLE
1P-0810 B		TAPE-ELECTRICAL
2L-8052	[1]	TERMINAL-RING (6-GA, 3/8-IN SCREW)
		-OR-
2L-8060	[1]	TERMINAL-RING (8-GA, 3/8-IN SCREW)
7Y-3951	[8]	TERMINAL-BLADE (14-GA)
2L-8079	[1]	TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW)
119-3662 E		TUBE-HEAT SHRINK (10.85-MM DIA)(65-CM)
125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(20-CM)
125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(80-CM)
155-2258	[3]	WEDGE-PLUG LOCK (12-PIN)
3E-3371	[1]	WEDGE-RECEPTACLE LOCK (3-PIN)
B		USE AS REQUIRED
E		ORDER BY THE CENTIMETER
M		METRIC PART

#SEBP49850297

339-5506: HARNESS AS-CHASSIS

HARNESS AS-CHASSIS

339-5506 HARNESS AS-CHASSIS -FRONT FRAME, LH
S/N SZN1-UP
PART OF 294-3542, 434-8050, 434-8052 WIRING GP-GRADE CONTROL

i04947306 SEBP4985

For full view, you need register

Parts for your 120K MOTOR GRADER:

CATERPILLAR SIS

Part No	Qty	Parts name
243-5362	[1]	CAP-DUST
7R-3029	[4]	CAP-DUST
228-3323	[4]	CLIP-SPRING
9W-0852	[4]	PIN-CONNECTOR (14-GA TO 16-GA)
9X-3401	[10]	PIN-CONNECTOR (16-GA TO 18-GA)
9X-4385	[1]	PLUG AS-CONNECTOR (6-PIN)
174-0503	[1]	KIT-CONNECTING PLUG (3-PIN)
		(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
8T-8737	[3]	PLUG-SEAL
102-8804	[1]	KIT-RECEPTACLE (4-PIN)
102-8801	[1]	KIT-RECEPTACLE (12-PIN)
		(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
134-2540	[1]	RECEPTACLE AS-CONNECTOR (3-PIN)
230-2566	[4]	RECEPTACLE-CONNECTOR
9X-3402	[2]	SOCKET-CONNECTOR (16-GA TO 18-GA)
119-3662 E		TUBE-HEAT SHRINK (10.85-MM DIA)(33-CM)
125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(120-CM)
E		ORDER BY THE CENTIMETER

#SEBP49850298

461-4541: HARNESS AS-CHASSIS

HARNESS AS-CHASSIS

461-4541 HARNESS AS-CHASSIS
S/N SZN1-UP
INDIA ROADING
PART OF 384-7616, 518-6849 WIRING GP-STEERING CONSOLE

i06218624 SEBP4985

For full view, you need register

Parts for your 120K MOTOR GRADER:

CATERPILLAR SIS

Part No	Qty	Parts name
102-8801	[2]	KIT-RECEPTACLE (12-PIN)
		(INCLUDES RECEPTACLE AS & WEDGE)
6V-0491	[16]	TERMINAL-BLADE (14-GA TO 18-GA)
7G-7918	[1]	PLUG-SEAL
7T-6365	[4]	HOUSING-RECEPTACLE
8N-1541	[1]	SOCKET-CONNECTOR (12-GA TO 14-GA)
8N-1546	[2]	PIN-CONNECTOR (6-GA)
8N-1547	[1]	SOCKET-CONNECTOR (6-GA)
8T-8729	[17]	PIN-CONNECTOR (16-GA TO 18-GA)
8T-8730	[22]	SOCKET-CONNECTOR (16-GA TO 18-GA)
8T-8737	[10]	PLUG-SEAL
9G-9314	[3]	TERMINAL-BLADE (14-GA TO 16-GA)
9R-9806	[11]	TERMINAL-BLADE (18-GA TO 20-GA)
9W-0844	[4]	SOCKET-CONNECTOR (14-GA TO 16-GA)
9W-0852	[3]	PIN-CONNECTOR (14-GA TO 16-GA)
9W-2032	[1]	TERMINAL-BLADE (10-GA TO 12-GA)
9W-2033	[15]	TERMINAL-BLADE (14-GA TO 16-GA)
119-3662 E		TUBE-HEAT SHRINK (10.85-MM DIA)(20-CM)
125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(20-CM)
125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(30-CM)
127-5483	[1]	PLUG AS-CONNECTOR (1-PIN)
127-5484	[2]	RECEPTACLE AS-CONNECTOR (1-PIN)
129-7163	[1]	PLUG AS-CONNECTOR (1-PIN)
129-7164	[1]	RECEPTACLE AS-CONNECTOR (1-PIN)
5P-4571	[5]	TERMINAL-BLADE (14-GA TO 16-GA)
5P-1475	[5]	TERMINAL-FORK (14-GA TO 16-GA, NO. 8 SCREW)
2L-8050	[3]	TERMINAL-RING (6-GA, 1/4-IN SCREW)
		-OR-
2L-8058	[3]	TERMINAL-RING (8-GA, 1/4-IN SCREW)
155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
155-2255	[2]	KIT-CONNECTING PLUG (12-PIN)
		(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
174-7566	[2]	BLOCK AS-FUSE
		(EACH INCLUDES)
151-1398	[2]	KIT-TERMINAL (LOCK)
	[1]	SEAL
199-6582	[1]	BLOCK AS-FUSE
8T-4205	[1]	WASHER-HARD (7.2X14.5X2-MM THK)
1H-3244	[1]	LOCKWASHER
6V-8185	[1]	NUT (1/4-20-THD)
185-1860	[21]	SEAL-WIRE
185-1861	[4]	SEAL-WIRE
202-5397	[5]	PLUG
204-1297	[21]	TERMINAL AS-BLADE (18-GA TO 20-GA)
		(EACH INCLUDES)
235-4123	[1]	TERMINAL (18-GA TO 20-GA)
245-7434	[3]	KIT-CONNECTING PLUG (10-PIN)
		(EACH PLUG KIT INCLUDES PLUG CONNECTOR, WIRE ASSEMBLIES & PLUGS)
E		ORDER BY THE CENTIMETER

#SEBP49850299

466-2119: HARNESS AS-CONSOLE

HARNESS AS-CONSOLE

466-2119 HARNESS AS-CONSOLE -TRANSMISSION
S/N SZN2223-UP
PART OF 530-3306 WIRING GP-CONSOLE

i06113596 SEBP4985

For full view, you need register

Parts for your 120K MOTOR GRADER:

CATERPILLAR SIS

Part No	Qty	Parts name
155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
		(EACH KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
245-7434	[2]	KIT-CONNECTING PLUG (10-PIN)
		(EACH KIT INCLUDES PLUG-CONNECTOR, WIRE ASSEMBLIES & PLUGS)
102-8805	[1]	KIT-RECEPTACLE (6-PIN)
102-8801	[1]	KIT-RECEPTACLE (12-PIN)
190-7615	[1]	KIT-RECEPTACLE (12-PIN)
		(EACH KIT INCLUDES RECEPTACLE AS & WEDGE)
8T-8729	[9]	PIN-CONNECTOR (16-GA TO 18-GA)
9X-3401	[14]	PIN-CONNECTOR (16-GA TO 18-GA)
202-5397	[1]	PLUG
7X-6222	[1]	PLUG AS-CONNECTOR (24-PIN)
3E-4367	[1]	RING-RETAINING
3E-8558 M	[1]	BOLT (M5X0.8X39.37-MM)
9X-3265	[2]	SEAL-CONNECTOR (24-PIN)
8T-8737	[22]	PLUG-SEAL
185-1860	[19]	SEAL-WIRE
8T-8730	[27]	SOCKET-CONNECTOR (16-GA TO 18-GA)
204-1297	[19]	TERMINAL AS-BLADE (18-GA TO 20-GA)
		(EACH INCLUDES)
235-4123	[1]	TERMINAL (18-GA TO 20-GA)
119-3662 E		TUBE-HEAT SHRINK (10.85-MM DIA)(20-CM)
E		ORDER BY THE CENTIMETER
M		METRIC PART