ELECTRICAL AND STARTING SYSTEM
HARNESS GPWIRING GP
ELECTRICAL AND STARTING SYSTEM
HARNESS GP#SEBP49850320
236-2356: HARNESS AS-SENSOR
236-2356 HARNESS AS-SENSOR -ANGLE
S/N SZN1-UP
BLADE INCLINATION
PART OF 294-3542, 434-8050, 434-8052 WIRING GP-GRADE CONTROL
S/N SZN1-UP
BLADE INCLINATION
PART OF 294-3542, 434-8050, 434-8052 WIRING GP-GRADE CONTROL
For full view, you need register
Parts for your 120K MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 243-5362 | [1] | CAP-DUST | ||
| 9X-2383 G | HOSE (50-IN) | |||
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-3401 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-4385 | [1] | PLUG AS-CONNECTOR (6-PIN) | ||
| 368-2369 B | TAPE | |||
| 368-2370 B | TAPE | |||
| 8T-5346 E | TUBE-HEAT SHRINK (19.1-MM DIA)(16-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM) | |||
| B | USE AS REQUIRED | |||
| E | ORDER BY THE CENTIMETER | |||
| G | ORDER BY THE INCH | |||
#SEBP49850321
243-3250: HARNESS AS-SENSOR
243-3250 HARNESS AS-SENSOR -ROTATION
S/N SZN1-UP
ACCUGRADE
PART OF 294-3542, 434-8050, 434-8052 WIRING GP-GRADE CONTROL
S/N SZN1-UP
ACCUGRADE
PART OF 294-3542, 434-8050, 434-8052 WIRING GP-GRADE CONTROL
For full view, you need register
Parts for your 120K MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 243-5362 | [1] | CAP-DUST | ||
| 9X-4385 | [1] | PLUG AS-CONNECTOR (6-PIN) | ||
| 155-2271 | [1] | KIT-CONNECTING PLUG (4-PIN) | ||
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 8T-8730 | [4] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM) | |||
| E | ORDER BY THE CENTIMETER | |||
#SEBP49850322
308-0291: HARNESS AS-SENSOR
For full view, you need register
Parts for your 120K MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| (INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-3402 | [2] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [2] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
#SEBP49850323
423-8806: HARNESS AS-SENSOR
For full view, you need register
Parts for your 120K MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 102-8801 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [8] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9W-0852 | [2] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 9X-3401 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-1054 | [1] | PLUG AS-CONNECTOR (4-PIN) | ||
| 230-4011 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
| 455-0704 | [1] | SEAL-CONNECTOR | ||
| 237-0227 | [1] | PLUG AS-CONNECTOR (3-PIN) | ||
| 455-0705 | [1] | SEAL-CONNECTOR | ||
| 8T-8737 | [1] | PLUG-SEAL | ||
| 230-4012 | [1] | RECEPTACLE AS-CONNECTOR (2-PIN) | ||
| 8T-8730 | [2] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 9W-0844 | [2] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 9X-3402 | [3] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-1056 | [4] | TERMINAL-RECEPTACLE (14-GA TO 16-GA) | ||
#SEBP49850324
492-2071: HARNESS AS-SENSOR
492-2071 HARNESS AS-SENSOR -FUEL PUMP
S/N SZN2223-UP
PART OF 532-9052 WIRING GP-REAR
S/N SZN2223-UP
PART OF 532-9052 WIRING GP-REAR
For full view, you need register
Parts for your 120K MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| (INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| 102-8801 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [8] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9W-0852 | [2] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 9X-3401 | [6] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-1054 | [1] | PLUG AS-CONNECTOR (4-PIN) | ||
| 230-4011 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
| 455-0704 | [1] | SEAL-CONNECTOR | ||
| 281-8803 | [1] | PLUG AS-CONNECTOR (3-PIN) | ||
| 237-0227 | [1] | PLUG AS-CONNECTOR (3-PIN) | ||
| (EACH PLUG AS INCLUDES) | ||||
| 455-0705 | [1] | SEAL-CONNECTOR | ||
| 8T-8737 | [2] | PLUG-SEAL | ||
| 230-4012 | [1] | RECEPTACLE AS-CONNECTOR (2-PIN) | ||
| 8T-8730 | [2] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 9W-0844 | [2] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 9X-3402 | [6] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-1056 | [4] | TERMINAL-RECEPTACLE (14-GA TO 16-GA) | ||
| 3E-3377 | [1] | WEDGE-RECEPTACLE LOCK (4-PIN) | ||
#SEBP49850325
551-1681: HARNESS AS-SENSOR
551-1681 HARNESS AS-SENSOR -BLADE SLOPE
S/N SZN20100-UP
PART OF 528-1021, 551-1811 WIRING GP-GRADE CONTROL
S/N SZN20100-UP
PART OF 528-1021, 551-1811 WIRING GP-GRADE CONTROL
For full view, you need register
Parts for your 120K MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 196-8876 E | BRAID (BLACK, ONE GOLD STRAND)(345-CM) | |||
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [4] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-3401 | [8] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 230-5011 | [1] | RECEPTACLE AS-CONNECTOR (6-PIN) | ||
| 3E-3383 | [1] | WEDGE-RECEPTACLE LOCK (6-PIN) | ||
| E | ORDER BY THE CENTIMETER | |||
#SEBP49850326
455-7844: HARNESS AS-STEERING
455-7844 HARNESS AS-STEERING
S/N SZN2409-UP
PART OF 434-4114, 518-6846 WIRING GP-STEERING CONSOLE
S/N SZN2409-UP
PART OF 434-4114, 518-6846 WIRING GP-STEERING CONSOLE
For full view, you need register
Parts for your 120K MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 102-8801 | [2] | KIT-RECEPTACLE (12-PIN) | ||
| (EACH INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 6V-0491 | [16] | TERMINAL-BLADE (14-GA TO 18-GA) | ||
| 7G-7918 | [1] | PLUG-SEAL | ||
| 7T-6365 | [4] | HOUSING-RECEPTACLE | ||
| 8N-1541 | [1] | SOCKET-CONNECTOR (12-GA TO 14-GA) | ||
| 8N-1546 | [2] | PIN-CONNECTOR (6-GA) | ||
| 8N-1547 | [1] | SOCKET-CONNECTOR (6-GA) | ||
| 8T-8729 | [16] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8730 | [17] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8737 | [10] | PLUG-SEAL | ||
| 9G-9314 | [5] | TERMINAL-BLADE (14-GA TO 16-GA) | ||
| 9R-9806 | [11] | TERMINAL-BLADE (18-GA TO 20-GA) | ||
| 9W-0844 | [4] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 9W-0852 | [3] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 9W-2032 | [1] | TERMINAL-BLADE (10-GA TO 12-GA) | ||
| 9W-2033 | [16] | TERMINAL-BLADE (14-GA TO 16-GA) | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(33-CM) | |||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(30-CM) | |||
| 127-5483 | [1] | PLUG AS-CONNECTOR (1-PIN) | ||
| 127-5484 | [2] | RECEPTACLE AS-CONNECTOR (1-PIN) | ||
| 129-7163 | [1] | PLUG AS-CONNECTOR (1-PIN) | ||
| 129-7164 | [1] | RECEPTACLE AS-CONNECTOR (1-PIN) | ||
| 5P-4571 | [5] | TERMINAL-BLADE (14-GA TO 16-GA) | ||
| 5P-1475 | [5] | TERMINAL-FORK (14-GA TO 16-GA, NO. 8 SCREW) | ||
| 2L-8050 | [3] | TERMINAL-RING (6-GA, 1/4-IN SCREW) | ||
| -OR- | ||||
| 2L-8058 | [3] | TERMINAL-RING (8-GA, 1/4-IN SCREW) | ||
| 155-2255 | [2] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 174-7566 | [2] | BLOCK AS-FUSE | ||
| (EACH INCLUDES) | ||||
| 1H-3244 | [1] | LOCKWASHER | ||
| 6V-8185 | [1] | NUT (1/4-20-THD) | ||
| 8T-4205 | [1] | WASHER-HARD (7.2X14.5X2-MM THK) | ||
| 151-1398 | [2] | KIT-TERMINAL (LOCK) | ||
| 185-1860 | [27] | SEAL-WIRE | ||
| 185-1861 | [6] | SEAL-WIRE | ||
| 202-5397 | [17] | PLUG | ||
| 204-1297 | [27] | TERMINAL AS-BLADE (18-GA TO 20-GA) | ||
| (EACH INCLUDES) | ||||
| 235-4123 | [1] | TERMINAL (18-GA TO 20-GA) | ||
| 245-7434 | [5] | KIT-CONNECTING PLUG (10-PIN) | ||
| (EACH INCLUDES CONNECTOR PLUG, WIRE ASSEMBLIES & PLUGS) | ||||
| E | ORDER BY THE CENTIMETER | |||
#SEBP49850327
379-4984: HARNESS AS-TRANSMISSION
379-4984 HARNESS AS-TRANSMISSION
S/N CK41-UP; JSE1-UP
PART OF 365-5537 CONTROL GP-TRANSMISSION HYD
S/N CK41-UP; JSE1-UP
PART OF 365-5537 CONTROL GP-TRANSMISSION HYD
For full view, you need register
Parts for your 120K MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 102-8801 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8737 | [16] | PLUG-SEAL | ||
| 114-8843 E | SLEEVE-PLASTIC (260-CM) | |||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(13-CM) | |||
| 9X-3402 | [36] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [36] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 9X-3401 | [10] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [10] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 155-2255 | [2] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2270 | [13] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 155-2258 | [2] | WEDGE-PLUG LOCK (12-PIN) | ||
| 1P-0810 B | TAPE-ELECTRICAL | |||
| 329-3734 B | TAPE-ELECTRICAL | |||
| 374-7463 | [1] | CAP-SEAL | ||
| 374-7468 | [1] | CAP-SEAL | ||
| B | USE AS REQUIRED | |||
| E | ORDER BY THE CENTIMETER | |||
#SEBP49850328
388-2518: HARNESS AS-TRANSMISSION
388-2518 HARNESS AS-TRANSMISSION
S/N SZN1535-UP
PART OF 388-2517 WIRING GP-REAR
S/N SZN1535-UP
PART OF 388-2517 WIRING GP-REAR
For full view, you need register
Parts for your 120K MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 231-9897 E | CONDUIT-FLEXIBLE (36-MM ID)(80-CM) | |||
| 126-1774 | [3] | COVER-CONNECTOR | ||
| 155-2257 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2260 | [2] | KIT-CONNECTING PLUG (3-PIN) | ||
| 155-2270 | [2] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 102-8806 | [1] | KIT-RECEPTACLE (8-PIN) | ||
| 102-8801 | [2] | KIT-RECEPTACLE (12-PIN) | ||
| (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [25] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-3401 | [4] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-0141 | [1] | PLUG AS-CONNECTOR (40-PIN) | ||
| 3E-4367 | [1] | RING-RETAINING | ||
| 3E-8557 M | [1] | BOLT (M5X0.8X39.37-MM) | ||
| 9X-3490 | [2] | SEAL-CONNECTOR (40-PIN) | ||
| 160-7689 | [1] | PLUG AS-CONNECTOR (70-PIN) | ||
| 147-1445 | [1] | PLUG AS-CONNECTOR (70-PIN) | ||
| 147-1446 | [1] | PLUG AS-CONNECTOR (70-PIN) | ||
| (EACH PLUG AS INCLUDES) | ||||
| 159-9322 | [1] | SEAL-O-RING | ||
| 8T-8737 | [119] | PLUG-SEAL | ||
| 8T-8730 | [107] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 9W-0844 | [15] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 9X-3402 | [82] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 7K-1181 | [6] | STRAP-CABLE | ||
| 2L-8069 | [2] | TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW) | ||
| 2L-8076 | [1] | TERMINAL-RING (14-GA TO 16-GA, NO. 10 SCREW) | ||
| 2L-8079 | [1] | TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW) | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(13-CM) | |||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(30-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(30-CM) | |||
| 311-4859 E | TUBE-HEAT SHRINK (48-MM DIA)(30-CM) | |||
| 155-2258 | [5] | WEDGE-PLUG LOCK (12-PIN) | ||
| 3E-3389 | [1] | WEDGE-RECEPTACLE LOCK (8-PIN) | ||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP49850329
492-2072: HARNESS AS-TRANSMISSION
492-2072 HARNESS AS-TRANSMISSION
S/N SZN2223-UP
PART OF 532-9050 WIRING GP-REAR
S/N SZN2223-UP
PART OF 532-9050 WIRING GP-REAR
For full view, you need register
Parts for your 120K MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 374-7466 | [1] | CAP-SEAL | ||
| 231-9897 E | CONDUIT-FLEXIBLE (36-MM ID)(80-CM) | |||
| 126-1774 | [3] | COVER-CONNECTOR | ||
| 155-2255 | [4] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2257 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2270 | [2] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2271 | [1] | KIT-CONNECTING PLUG (4-PIN) | ||
| 155-2274 | [1] | KIT-CONNECTING PLUG (6-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| 174-0503 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGES & INTERFACE SEAL) | ||||
| 102-8806 | [1] | KIT-RECEPTACLE (8-PIN) | ||
| 102-8801 | [2] | KIT-RECEPTACLE (12-PIN) | ||
| (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [23] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-3401 | [6] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-0141 | [1] | PLUG AS-CONNECTOR (40-PIN) | ||
| 3E-8557 M | [1] | BOLT (M5X0.8X39.37-MM) | ||
| 3E-4367 | [1] | RING-RETAINING | ||
| 9X-3490 | [2] | SEAL-CONNECTOR (40-PIN) | ||
| 147-1446 | [1] | PLUG AS-CONNECTOR (70-PIN) | ||
| 147-1445 | [1] | PLUG AS-CONNECTOR (70-PIN) | ||
| 160-7689 | [1] | PLUG AS-CONNECTOR (70-PIN) | ||
| (EACH PLUG AS INCLUDES) | ||||
| 159-9322 | [1] | SEAL-O-RING | ||
| 8T-8737 | [128] | PLUG-SEAL | ||
| 134-2540 | [1] | RECEPTACLE AS-CONNECTOR (3-PIN) | ||
| 8T-8730 | [91] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 9W-0844 | [17] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 9X-3402 | [97] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-6772 | [6] | STRAP-CABLE | ||
| 2L-8069 | [3] | TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW) | ||
| 311-4859 E | TUBE-HEAT SHRINK (48-MM DIA)(30-CM) | |||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(28-CM) | |||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(50-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(15-CM) | |||
| 155-2258 | [5] | WEDGE-PLUG LOCK (12-PIN) | ||
| 3E-3389 | [1] | WEDGE-RECEPTACLE LOCK (8-PIN) | ||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
