455-0162 DRYER & LINES GP-AIR S/N SZN2223-UP PART OF 455-0158 AIR DRYER GP Type 1 120K MOTOR GRADER

BRAKING SYSTEM

AIR DRYER GP

0. 455-0162 DRYER & LI
1. 455-0162 DRYER & LI

TANK GP

2. 434-8083 LINES GP-A
3. 293-4830 TANK GP-AI
4. 434-8086 TANK GP-AI
5. 434-8087 TANK GP-AI
6. 455-0154 TANK GP-AI

VALVE GP

7. 185-0008 VALVE GP-S

OPERATOR STATION

CONTROL GP-HYDRAULIC

8. 348-7029 CONTROL AR
9. 348-7032 CONTROL AR
0. INFORMATION

MOTOR GRADER 120K MOTOR GRADER SZN
120K Motor Grader SZN00001-UP (MACHINE) POWERED BY C7 Engine SEBP4985 120K SZN (2010)

BRAKING SYSTEM

AIR DRYER GP

450-3729 AIR DRYER GP

455-0158 AIR DRYER GP

455-0162 DRYER & LINES GP-AIR

#SEBP49850700

455-0162: DRYER & LINES GP-AIR

DRYER & LINES GP-AIR

455-0162 DRYER & LINES GP-AIR
S/N SZN2223-UP
PART OF 455-0158 AIR DRYER GP
Type 1

i06054156 SEBP4985

4550162 DRYER & LINES GP-AIR Parts scheme

For full view, you need register

Parts for your 120K MOTOR GRADER:

Pos.	Part No	Qty	Parts name
1.	3D-7587	[2]	ELBOW
2.	8W-8528	[1]	SLEEVE
3.	217-4369	[1]	BRACKET AS
	8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
4.	303-2348	[1]	TUBE
5.	327-0727	[1]	PLATE
6.	327-0728	[1]	PLATE AS
	8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
7.	450-3729 Y	[1]	AIR DRYER GP
8.	515-1615 I	[1]	HOSE AS
9.	457-4050 I	[1]	HOSE AS
10.	457-4051 I	[1]	HOSE AS
11.	0A-2926	[1]	FITTING
12.	174-5907	[8]	CLIP (LOOP)
13.	205-7299	[3]	CLIP (LOOP)
14.	2S-3440	[1]	CLAMP-HOSE
15.	344-5675 M	[3]	NUT (M10X1.5-THD)
16.	4K-8864	[1]	CLIP (LOOP)
17.	5B-1585	[2]	ELBOW
18.	5K-8451	[2]	CLIP (LOOP)
19.	5P-4424	[2]	ELBOW-AIR BRAKE
20.	5P-7854	[3]	CLIP (LOOP)
21.	6V-1889	[1]	CLIP (LOOP)
22.	7D-0215	[1]	CONNECTOR-PIPE
23.	7X-7729	[2]	WASHER (11X25X3-MM THK)
24.	8T-4121	[14]	WASHER-HARD (11X21X2.5-MM THK)
25.	8T-4136 M	[13]	BOLT (M10X1.5X25-MM)
26.	8T-4223	[3]	WASHER-HARD (13.5X25.5X3-MM THK)
27.	8T-8917	[3]	BOLT (1/2-13X1.25-IN)
28.	9L-3560	[2]	ELBOW
29.	9M-8406	[1]	CLIP (LOOP)
30.	8I-1362 BE		HOSE (131-CM)
	B		USE AS REQUIRED
	E		ORDER BY THE CENTIMETER
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP49850701

455-0162: DRYER & LINES GP-AIR

DRYER & LINES GP-AIR

455-0162 DRYER & LINES GP-AIR
S/N SZN2223-UP
PART OF 455-0158 AIR DRYER GP
Type 2

i07291583 SEBP4985

For full view, you need register

Parts for your 120K MOTOR GRADER:

Pos.	Part No	Qty	Parts name
1.	3D-7587	[2]	ELBOW
2.	8W-8528	[1]	SLEEVE
3.	217-4369	[1]	BRACKET AS
4.	303-2348	[1]	TUBE
5.	327-0727	[1]	PLATE
6.	327-0728	[1]	PLATE AS
7.	450-3729 Y	[1]	AIR DRYER GP
8.	515-1615 I	[1]	HOSE AS
9.	539-5419 CI	[1]	HOSE AS
10.	457-4051 I	[1]	HOSE AS
11.	0A-2926	[1]	FITTING
12.	174-5907	[8]	CLIP (LOOP)
13.	205-7299	[3]	CLIP (LOOP)
14.	2S-3440	[1]	CLAMP-HOSE
15.	344-5675 M	[3]	NUT (M10X1.5-THD)
16.	4K-8864	[1]	CLIP (LOOP)
17.	5B-1585	[2]	ELBOW
18.	5K-8451	[2]	CLIP (LOOP)
19.	5P-4424	[2]	ELBOW-AIR BRAKE
20.	5P-7854	[3]	CLIP (LOOP)
21.	6V-1889	[1]	CLIP (LOOP)
22.	7D-0215	[1]	CONNECTOR-PIPE
23.	7X-7729	[2]	WASHER (11X25X3-MM THK)
24.	8T-4121	[14]	WASHER-HARD (11X21X2.5-MM THK)
25.	8T-4136 M	[13]	BOLT (M10X1.5X25-MM)
26.	8T-4223	[3]	WASHER-HARD (13.5X25.5X3-MM THK)
27.	8T-8917	[3]	BOLT (1/2-13X1.25-IN)
28.	9L-3560	[2]	ELBOW
29.	9M-8406	[1]	CLIP (LOOP)
30.	8I-1362 E		HOSE (131-CM)
31.	228-7090 C	[1]	SEAL-O-RING
32.	8C-6872 C	[1]	CONNECTOR
	C		CHANGE FROM PREVIOUS TYPE
	E		ORDER BY THE CENTIMETER
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP49850702

434-8083: LINES GP-AIR TANK

LINES GP-AIR TANK

434-8083 LINES GP-AIR TANK
S/N SZN2223-UP
PART OF 435-8193 HYDRAULIC AR

i06113675 SEBP4985

For full view, you need register

Parts for your 120K MOTOR GRADER:

Pos.	Part No	Qty	Parts name
1.	3D-7587	[1]	ELBOW
2.	5F-5434	[1]	VALVE AS-VENT
3.	205-7187 J	[1]	GOVERNOR AS (AIR COMPRESSOR)
	2S-2923	[1]	COVER AS
	2K-8198	[1]	SEAL-O-RING
4.	292-4772	[1]	PLATE-SUPPORT
5.	515-1614 I	[1]	HOSE AS
6.	515-1618 I	[1]	HOSE AS
7.	091-9035	[1]	SPACER (11X25X20-MM THK)
8.	202-2762	[4]	CLIP (LOOP)
9.	205-7299	[2]	CLIP (LOOP)
10.	344-5673 M	[2]	NUT (M6X1-THD)
11.	344-5675 M	[5]	NUT (M10X1.5-THD)
12.	3E-6909	[1]	CLIP (LOOP)
13.	4D-2560	[2]	CONNECTOR-PIPE
14.	4D-7388	[1]	CLIP (LOOP)
15.	4D-7733	[1]	CLIP (LOOP)
16.	4S-7606	[1]	ELBOW
17.	7D-7233	[1]	CLIP (LOOP)
18.	7X-7729	[2]	WASHER (11X25X3-MM THK)
19.	8L-5008	[1]	ELBOW-PIPE
20.	8T-4121	[11]	WASHER-HARD (11X21X2.5-MM THK)
21.	8T-4136 M	[5]	BOLT (M10X1.5X25-MM)
22.	8T-4182 M	[1]	BOLT (M10X1.5X45-MM)
23.	8T-4186 M	[1]	BOLT (M10X1.5X40-MM)
24.	8T-4195 M	[1]	BOLT (M10X1.5X30-MM)
25.	8T-6757	[4]	PLUG-PIPE
26.	8T-6974 M	[2]	BOLT (M6X1X80-MM)
27.	9M-4594	[1]	SPACER (0.406X0.875X0.75-IN THK)
28.	9X-8256	[4]	WASHER (6.6X12X2-MM THK)

			AVAILABLE REPAIR KIT(S):
	9M-0402 J	[1]	KIT-GOVERNOR OVERHAUL (AIR COMPRESSOR)
			(INCLUDES GROMMETS, FILTERS, SPRING, VALVE, COVER, RING & GASKET)
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	J		KIT MARKED J SERVICES PART(S) MARKED J
	M		METRIC PART

#SEBP49850703

293-4830: TANK GP-AIR

TANK GP-AIR

293-4830 TANK GP-AIR
S/N SZN1-2222
PART OF 348-3018 GENERAL AR

i03854331 SEBP4985

For full view, you need register

Parts for your 120K MOTOR GRADER:

Pos.	Part No	Qty	Parts name
1.	1P-7115	[4]	GROMMET AS
2.	2G-1034	[2]	VALVE-AIR RELIEF
5.	3D-7587	[1]	ELBOW
6.	5F-5434	[1]	VALVE AS-VENT
7.	5B-8978	[1]	TEE
8.	8M-3368	[2]	VALVE-CHECK
9.	8W-7915 B	[2]	SHIM (2-MM THK)
10.	8W-8496	[2]	PLATE
12.	8W-8575	[1]	RESERVOIR
13.	9D-6663	[2]	VALVE-DRAIN
14.	9M-4594	[1]	SPACER (0.406X0.875X0.75-IN THK)
15.	004-5933	[1]	TEE-PIPE
16.	205-7187 J	[1]	GOVERNOR AS (AIR COMPRESSOR)
	2S-2923	[1]	COVER AS
	2K-8198		SEAL-O-RING
18.	292-4772	[1]	PLATE-SUPPORT
19.	327-3973 I	[1]	HOSE AS
20.	460-1394 I	[1]	HOSE AS
21.	342-0725 I	[1]	HOSE AS
23.	002-6453	[2]	ELBOW
26.	202-2762	[4]	CLIP (LOOP)
27.	205-7299	[2]	CLIP (LOOP)
28.	3D-8913	[2]	ELBOW
29.	3E-6909	[1]	CLIP (LOOP)
30.	4D-0577	[1]	ELBOW
31.	4D-2560	[2]	CONNECTOR-PIPE
32.	4D-7388	[1]	CLIP (LOOP)
33.	4D-7733	[1]	CLIP (LOOP)
34.	4S-7606	[2]	ELBOW
35.	5C-2890 M	[2]	NUT (M6X1-THD)
36.	5P-8998	[2]	FITTING
37.	5S-7383	[4]	BOLT (3/8-16X1.75-IN)
39.	6V-8801	[4]	NUT (3/8-16-THD)
40.	7C-6921	[1]	SPACER (11X20X22.8-MM THK)
41.	7D-4903	[1]	ADAPTER
42.	7D-7233	[1]	CLIP (LOOP)
43.	7F-9311	[4]	FITTING
44.	7X-0578	[8]	WASHER-HARD (10.2X32X2.5-MM THK)
45.	7X-7729	[2]	WASHER (11X25X3-MM THK)
46.	8L-5008	[1]	ELBOW-PIPE
47.	8T-4121	[15]	WASHER-HARD (11X21X2.5-MM THK)
48.	8T-4133 M	[5]	NUT (M10X1.5-THD)
49.	8T-4136 M	[9]	BOLT (M10X1.5X25-MM)
50.	8T-4182 M	[1]	BOLT (M10X1.5X45-MM)
51.	8T-4186 M	[1]	BOLT (M10X1.5X40-MM)
52.	8T-4195 M	[1]	BOLT (M10X1.5X30-MM)
53.	5P-1075	[4]	WASHER-HARD (10.2X22.5X3-MM THK)
54.	8T-6757	[4]	PLUG-PIPE
55.	8T-6974 M	[2]	BOLT (M6X1X80-MM)
56.	9X-8256	[4]	WASHER (6.6X12X2-MM THK)

			AVAILABLE REPAIR KIT(S):
	9M-0402 J	[1]	KIT-GOVERNOR OVERHAUL (AIR COMPRESSOR)
			(INCLUDES GROMMETS, FILTERS, SPRING, VALVE, COVER, RING, & GASKET)
	B		USE AS REQUIRED
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	J		KIT MARKED J SERVICES PART(S) MARKED J
	M		METRIC PART

#SEBP49850704

434-8086: TANK GP-AIR

TANK GP-AIR

434-8086 TANK GP-AIR
S/N SZN1-UP
CANNOT BE USED WITH @@@@@293-4830@@@@@, @@@@@303-2035@@@@@

i05944291 SEBP4985

For full view, you need register

Parts for your 120K MOTOR GRADER:

Pos.	Part No	Qty	Parts name	Comments
1.		[1]	RESERVOIR
2.		[1]	RESERVOIR

#SEBP49850705

434-8087: TANK GP-AIR

TANK GP-AIR

434-8087 TANK GP-AIR
S/N SZN2223-UP
PART OF 465-8777 DISTRIBUTION AR, 435-8193 HYDRAULIC AR
CANNOT BE USED WITH @@@@@455-0154@@@@@

i05944301 SEBP4985

For full view, you need register

Parts for your 120K MOTOR GRADER:

Pos.	Part No	Qty	Parts name
1.	1P-7115	[4]	GROMMET AS
2.	2G-1034	[2]	VALVE-AIR RELIEF
3.	7D-6936	[2]	VALVE AS-CHECK
4.	8W-7915 B	[2]	SHIM (2-MM THK)
5.	8W-8496	[2]	PLATE
6.	8W-8575	[1]	RESERVOIR
7.	9D-6663	[2]	VALVE-DRAIN
8.	191-3645	[1]	RESERVOIR
9.	327-0726	[1]	PLATE
10.	460-1394 I	[1]	HOSE AS
11.	002-6453	[2]	ELBOW
12.	004-5933	[1]	TEE-PIPE
13.	3B-7740	[2]	NIPPLE-PIPE
14.	3D-8913	[2]	ELBOW
15.	3J-5390	[1]	PLUG (3/8-18-THD)
16.	4D-0577	[1]	ELBOW
17.	6A-3591	[1]	TEE-PIPE
18.	5P-1075	[4]	WASHER-HARD (10.2X22.5X3-MM THK)
19.	5S-7383	[4]	BOLT (3/8-16X1.75-IN)
20.	6V-8801	[4]	NUT (3/8-16-THD)
21.	7D-4903	[1]	ADAPTER
22.	7F-9311	[4]	FITTING
23.	7X-0578	[8]	WASHER-HARD (10.2X32X2.5-MM THK)
24.	7X-7729	[2]	WASHER (11X25X3-MM THK)
25.	8T-4121	[6]	WASHER-HARD (11X21X2.5-MM THK)
26.	8T-4136 M	[8]	BOLT (M10X1.5X25-MM)
27.	8T-4224	[2]	WASHER-HARD (8.8X16X2-MM THK)
28.	8T-4908 M	[2]	BOLT (M8X1.25X25-MM)
	B		USE AS REQUIRED
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	M		METRIC PART

#SEBP49850706

455-0154: TANK GP-AIR

TANK GP-AIR

455-0154 TANK GP-AIR
S/N SZN1-UP
CHINA ONLY
CANNOT BE USED WITH @@@@@434-8087@@@@@

i05944278 SEBP4985

For full view, you need register

Parts for your 120K MOTOR GRADER:

Pos.	Part No	Qty	Parts name
1.	1P-7115	[4]	GROMMET AS
2.	2G-1034	[2]	VALVE-AIR RELIEF
3.	7D-6936	[2]	VALVE AS-CHECK
4.	8W-7915 B	[2]	SHIM (2-MM THK)
5.	8W-8496	[2]	PLATE
6.	9D-6663	[2]	VALVE-DRAIN
7.	327-0726	[1]	PLATE
8.		[1]	RESERVOIR
9.		[1]	RESERVOIR
10.	460-1394 I	[1]	HOSE AS
11.	002-6453	[2]	ELBOW
12.	004-5933	[1]	TEE-PIPE
13.	3B-7740	[2]	NIPPLE-PIPE
14.	3D-8913	[2]	ELBOW
15.	3J-5390	[1]	PLUG (3/8-18-THD)
16.	4D-0577	[1]	ELBOW
17.	5L-5502	[1]	FITTING
18.	5P-1075	[4]	WASHER-HARD (10.2X22.5X3-MM THK)
19.	5S-7383	[4]	BOLT (3/8-16X1.75-IN)
20.	6V-8801	[4]	NUT (3/8-16-THD)
21.	7D-4903	[1]	ADAPTER
22.	7F-9311	[4]	FITTING
23.	7X-0578	[8]	WASHER-HARD (10.2X32X2.5-MM THK)
24.	7X-7729	[2]	WASHER (11X25X3-MM THK)
25.	8T-4121	[6]	WASHER-HARD (11X21X2.5-MM THK)
26.	8T-4136 M	[8]	BOLT (M10X1.5X25-MM)
27.	8T-4224	[2]	WASHER-HARD (8.8X16X2-MM THK)
28.	8T-4908 M	[2]	BOLT (M8X1.25X25-MM)
	B		USE AS REQUIRED
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	M		METRIC PART