WORK TOOLS
RIPPER GPSCARIFIER GP
GROUND ENGAGING TOOLS (G.E.T.)
SERVICE EQUIPMENT AND SUPPLIES
BOX GP-TOOLWORK TOOLS
RIPPER GP
#SEBP49851130
301-8205: MOUNTING GP-RIPPER
For full view, you need register
Parts for your 120K MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3W-7254 | [2] | SPACER (47X80X20-MM THK) | |
| 2. | 104-4523 | [2] | CAM AS | |
| 4. | 301-8207 | [2] | LINK AS | |
| 5. | 304-0267 | [1] | PLATE AS | |
| 6. | 307-0769 | [2] | BOSS | |
| 7. | 354-0882 | [2] | PIN | |
| 8. | 113-0993 | [1] | PIN | |
| 9. | 124-6679 | [2] | PIN | |
| 10. | 129-3180 M | [3] | LOCKNUT (M12X1.75-THD) | |
| 11. | 7X-2543 M | [2] | BOLT (M10X1.5X120-MM) | |
| 12. | 7X-2549 M | [3] | BOLT (M12X1.75X100-MM) | |
| 13. | 7X-2575 M | [10] | BOLT (M24X3X60-MM) | |
| 14. | 8T-0389 M | [4] | LOCKNUT (M10X1.5-THD) | |
| 15. | 8T-1482 | [10] | WASHER-HARD (26X50X8-MM THK) | |
| 16. | 8T-6685 M | [2] | BOLT (M10X1.5X110-MM) | |
| 17. | 9J-0090 | [2] | PIN | |
| M | METRIC PART | |||
#SEBP49851131
301-8206: RIPPER AR
For full view, you need register
Parts for your 120K MOTOR GRADER:
CATERPILLAR SIS#SEBP49851132
439-9104: RIPPER AR
439-9104 RIPPER AR
S/N SZN1-UP
PART OF 458-5955 OPTION AR-WORK TOOL
CANNOT BE USED WITH @@@@@284-5378@@@@@, @@@@@442-1756@@@@@
S/N SZN1-UP
PART OF 458-5955 OPTION AR-WORK TOOL
CANNOT BE USED WITH @@@@@284-5378@@@@@, @@@@@442-1756@@@@@
For full view, you need register
Parts for your 120K MOTOR GRADER:
CATERPILLAR SIS#SEBP49851133
299-2511: RIPPER GP
For full view, you need register
Parts for your 120K MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8J-5313 Y | [3] | TOOTH GP-RIPPER | |
| 2. | 113-0994 Y | [2] | LINK GP-UPPER | |
| 3. | 113-0997 Y | [1] | LINK GP-LOWER | |
| 4. | 124-9768 | [1] | CARRIAGE AS | |
| 5G-8760 | [6] | BOSS | ||
| 113-1009 | [5] | HOLDER AS | ||
| 5. | 190-5386 | [2] | FILM-IDENTIFICATION (ROUND RED REFLECTIVE)(RIPPER) | |
| 6. | 109-6776 | [2] | PIN | |
| 7. | 113-0996 | [2] | PIN | |
| 8. | 129-3180 M | [2] | LOCKNUT (M12X1.75-THD) | |
| 9. | 3G-0471 | [1] | PIN | |
| 10. | 7X-2549 M | [2] | BOLT (M12X1.75X100-MM) | |
| 11. | 8T-0389 M | [3] | LOCKNUT (M10X1.5-THD) | |
| 12. | 8T-4198 M | [3] | BOLT (M10X1.5X100-MM) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP49851134
340-5008: SCARIFIER AR
340-5008 SCARIFIER AR -VEE TYPE
S/N SZN1-UP
S/N SZN1-UP
For full view, you need register
Parts for your 120K MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 339-7734 Y | [1] | BRACKET GP-SCARIFIER | ||
| 8W-2913 Y | [1] | CYLINDER & MTG GP-SCARIFIER | ||
| 341-8349 Y | [1] | DRAWBAR GP | ||
| -OR- | ||||
| 417-8152 Y | [1] | DRAWBAR GP | ||
| 8X-6070 Y | [1] | LINES GP-HYDRAULIC (SCARIFIER) | ||
| 110-2985 Y | [1] | LINES GP-HYDRAULIC (RH) | ||
| 117-3855 Y | [1] | LINES GP-HYDRAULIC (LH) | ||
| 310-9428 Y | [1] | SCARIFIER GP (VEE TYPE) | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP49851135
394-4972: SCARIFIER AR
394-4972 SCARIFIER AR -VEE TYPE
S/N SZN1-UP
WITH HYDRAULIC BLADE TIP
FOR USE WITH @@@@@348-6939@@@@@, @@@@@394-4973@@@@@
S/N SZN1-UP
WITH HYDRAULIC BLADE TIP
FOR USE WITH @@@@@348-6939@@@@@, @@@@@394-4973@@@@@
For full view, you need register
Parts for your 120K MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 339-7734 Y | [1] | BRACKET GP-SCARIFIER | ||
| 8W-2913 Y | [1] | CYLINDER & MTG GP-SCARIFIER | ||
| 341-8349 Y | [1] | DRAWBAR GP | ||
| -OR- | ||||
| 417-8152 Y | [1] | DRAWBAR GP | ||
| 8X-6070 Y | [1] | LINES GP-HYDRAULIC | ||
| 106-4787 Y | [1] | LINES GP-HYDRAULIC (LH) | ||
| 110-2985 Y | [1] | LINES GP-HYDRAULIC (RH) | ||
| 310-9428 Y | [1] | SCARIFIER GP (VEE TYPE) | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP49851136
435-1515: SCARIFIER AR
435-1515 SCARIFIER AR -VEE TYPE
S/N SZN1-UP
PART OF 458-5941, 460-7649 OPTION AR-HYDRAULIC
FOR USE WITH @@@@@434-8085@@@@@, @@@@@434-8088@@@@@
CANNOT BE USED WITH @@@@@439-9111@@@@@
S/N SZN1-UP
PART OF 458-5941, 460-7649 OPTION AR-HYDRAULIC
FOR USE WITH @@@@@434-8085@@@@@, @@@@@434-8088@@@@@
CANNOT BE USED WITH @@@@@439-9111@@@@@
For full view, you need register
Parts for your 120K MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 339-7734 Y | [1] | BRACKET GP-SCARIFIER | ||
| 8W-2913 Y | [1] | CYLINDER & MTG GP-SCARIFIER | ||
| 417-8152 Y | [1] | DRAWBAR GP | ||
| 8X-6070 Y | [1] | LINES GP-HYDRAULIC | ||
| 110-2985 Y | [1] | LINES GP-HYDRAULIC (RH) | ||
| S/N SZN1-2413 | ||||
| 479-5978 Y | [1] | LINES GP-HYDRAULIC (RH) | ||
| S/N SZN2414-UP | ||||
| 310-9428 Y | [1] | SCARIFIER GP (VEE TYPE) | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP49851137
310-9428: SCARIFIER GP
310-9428 SCARIFIER GP -VEE TYPE
S/N SZN1-UP
PART OF 340-5008, 394-4972, 435-1515 SCARIFIER AR
S/N SZN1-UP
PART OF 340-5008, 394-4972, 435-1515 SCARIFIER AR
For full view, you need register
Parts for your 120K MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7X-0386 | [2] | BOLT (7/8-9X3.5-IN) | |
| 3. | 2G-4332 | [1] | BLOCK AS-SCARIFIER | |
| 7D-8825 | [11] | SPACER | ||
| 7D-8826 | [11] | SPACER | ||
| 4. | 6K-3632 | [4] | LOCKNUT (1-8-THD) | |
| 5. | 3B-8489 | [4] | FITTING-GREASE (1/8-27 PTF) | |
| 6. | 7X-0450 | [4] | NUT-FULL (1-1/8-7-THD) | |
| 7. | 4D-6086 | [2] | KEY | |
| 8. | 5B-0577 | [2] | COLLAR | |
| 9. | 5D-8159 | [2] | PIN AS | |
| 10. | 5K-1458 | [11] | GROMMET | |
| 11. | 5K-1459 | [11] | LOCK PIN | |
| 12. | 6B-3260 | [1] | TOOL | |
| 13. | 6F-6992 | [4] | CAP-BALL SOCKET | |
| 14. | 6Y-5230 | [11] | TOOTH-SCARIFIER | |
| 15. | 7D-2196 | [2] | SLEEVE AS-LINK | |
| (EACH INCLUDES) | ||||
| 7D-2136 | [1] | SOCKET-BALL | ||
| 16. | 7F-1327 B | [32] | SHIM (0.03-IN THK) | |
| 17. | 8D-1268 | [2] | ARM AS-LIFT | |
| (EACH INCLUDES) | ||||
| 7D-8245 | [1] | STUD-BALL | ||
| 18. | 7X-0443 | [4] | BOLT (1-8X5.5-IN) | |
| 19. | 7X-0423 | [4] | BOLT (1-1/8-7X4.5-IN) | |
| 20. | 8W-0663 | [2] | BRACKET AS | |
| (EACH INCLUDES) | ||||
| 3B-8489 | [1] | FITTING-GREASE (1/8-27 PTF) | ||
| 107-8374 | [2] | BEARING | ||
| 21. | 8X-6075 | [1] | BOLSTER AS | |
| 22. | 9D-5516 | [2] | LINK AS-LIFT | |
| (EACH INCLUDES) | ||||
| 7D-2135 | [1] | SOCKET-BALL | ||
| 23. | 107-8375 | [1] | SHAFT AS | |
| 24. | 118-7880 | [1] | DRAWBAR AS | |
| 2G-7728 | [2] | COLLAR | ||
| 8W-5597 | [1] | STUD-BALL | ||
| 25. | 118-7881 | [1] | DRAWBAR AS | |
| 2G-7728 | [2] | COLLAR | ||
| 8W-5597 | [1] | STUD-BALL | ||
| 26. | 195-7218 | [11] | SHANK | |
| 27. | 198-9811 B | [16] | SPACER (83X145X3-MM THK) | |
| 28. | 198-9812 B | [3] | SPACER (83X145X2-MM THK) | |
| 29. | 8T-8924 | [8] | BOLT (3/4-10X2.5-IN) | |
| 30. | 8C-8842 | [4] | BOLT (3/4-10X4-IN) | |
| 31. | 6V-8188 | [2] | NUT (1/2-13-THD) | |
| 32. | 330-6877 | [1] | SHAFT | |
| 33. | 6V-8182 | [4] | NUT (3/4-10-THD) | |
| 34. | 282-0882 | [4] | WASHER-HARD (33X56X6-MM THK) | |
| 35. | 5D-8161 | [2] | PIN | |
| 36. | 8T-4223 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 37. | 8T-4994 | [8] | WASHER-HARD (20X36.5X3.5-MM THK) | |
| 38. | 8T-5361 | [8] | WASHER-HARD (28X49X5-MM THK) | |
| 39. | 6K-0545 | [6] | LOCKNUT (7/8-9-THD) | |
| 40. | 7X-0390 | [4] | BOLT (7/8-9X5-IN) | |
| 41. | 8C-6913 | [4] | WASHER-HARD (24X41.5X4-MM THK) | |
| 42. | 6C-9149 | [8] | WASHER (22X50X10-MM THK) | |
| 43. | 7X-0328 | [2] | BOLT (1/2-13X3.5-IN) | |
| B | USE AS REQUIRED | |||
#SEBP49851138
8J-5313: TOOTH GP-RIPPER
For full view, you need register
#SEBP49851139
111-1719: BOX GP-TOOL
For full view, you need register
