311-2739 DRYER & LINES GP-AIR S/N JBP153-UP PART OF 311-2738 DRYER & LINES GP-AIR Type 1 160K MOTOR GRADER

BRAKING SYSTEM

AIR DRYER GP

0. 311-2739 DRYER & LI
1. 311-2739 DRYER & LI
2. 311-2739 DRYER & LI
3. 455-0163 DRYER & LI
4. 455-0163 DRYER & LI

TANK GP

5. 434-8068 LINES GP-A
6. 434-8068 LINES GP-A
7. 434-8068 LINES GP-A
8. 314-9370 TANK GP-AI
9. 314-9370 TANK GP-AI
0. INFORMATION

MOTOR GRADER 160K MOTOR GRADER JBP
160K Motor Grader JBP00001-UP (MACHINE) POWERED BY C7 Engine SEBP4988 160K JBP (2009)

BRAKING SYSTEM

AIR DRYER GP

215-3005 AIR DRYER GP

311-2737 AIR DRYER GP

450-3729 AIR DRYER GP

455-0159 AIR DRYER GP

311-2738 DRYER & LINES GP-AIR

311-2739 DRYER & LINES GP-AIR

455-0163 DRYER & LINES GP-AIR

#SEBP49880770

311-2739: DRYER & LINES GP-AIR

DRYER & LINES GP-AIR

311-2739 DRYER & LINES GP-AIR
S/N JBP153-UP
PART OF 311-2738 DRYER & LINES GP-AIR
Type 1

i03251621 SEBP4988

3112739 DRYER & LINES GP-AIR Parts scheme

For full view, you need register

Parts for your 160K MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2S-3440	[1]	CLAMP-HOSE
2.	5P-4401	[1]	CONNECTOR-AIR BRAKE
3.	5P-4424	[1]	ELBOW-AIR BRAKE
4.	6V-2610	[1]	FITTING
5.	127-9323	[2]	BRACKET AS
			(EACH INCLUDES)
	8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
6.	191-3645	[1]	RESERVOIR
7.	215-3005 Y	[1]	AIR DRYER GP
8.	260-9133	[1]	PLATE
9.	301-3170	[1]	TUBE
10.	342-1548 I	[1]	HOSE AS
11.	344-9192 I	[1]	HOSE AS
12.	174-5907	[1]	CLIP (LOOP)
13.	205-7299	[5]	CLIP (LOOP)
14.	302-3908	[1]	SPACER (11X20X30-MM THK)
15.	6V-7535	[1]	ELBOW-PIPE
16.	3J-5390	[1]	PLUG (3/8-18-THD)
17.	4D-7733	[7]	CLIP (LOOP)
18.	4S-4455	[1]	CLIP
19.	5C-6565	[3]	BOLT (1/2-13X1.125-IN)
20.	5K-8451	[1]	CLIP (LOOP)
21.	5P-7854	[3]	CLIP (LOOP)
22.	7D-4903	[2]	ADAPTER
23.	7D-0215	[1]	CONNECTOR-PIPE
24.	8T-4121	[16]	WASHER-HARD (11X21X2.5-MM THK)
25.	8T-4133 M	[3]	NUT (M10X1.5-THD)
26.	8T-4136 M	[4]	BOLT (M10X1.5X25-MM)
27.	8T-4137 M	[5]	BOLT (M10X1.5X20-MM)
28.	8T-4195 M	[3]	BOLT (M10X1.5X30-MM)
29.	8T-4223	[3]	WASHER-HARD (13.5X25.5X3-MM THK)
30.	8T-4224	[2]	WASHER-HARD (8.8X16X2-MM THK)
31.	8T-6466 M	[1]	BOLT (M10X1.5X60-MM)
32.	8T-7547 M	[2]	BOLT (M8X1.25X30-MM)
33.	9L-3560	[2]	ELBOW
34.	9M-8406	[4]	CLIP (LOOP)
35.	8I-1362 E		HOSE (131-CM)
	E		ORDER BY THE CENTIMETER
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP49880771

311-2739: DRYER & LINES GP-AIR

DRYER & LINES GP-AIR

311-2739 DRYER & LINES GP-AIR
S/N JBP153-UP
PART OF 311-2738 DRYER & LINES GP-AIR
Type 2

i05725170 SEBP4988

For full view, you need register

Parts for your 160K MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2S-3440	[1]	CLAMP-HOSE
2.	5P-4401	[1]	CONNECTOR-AIR BRAKE
3.	5P-4424	[1]	ELBOW-AIR BRAKE
4.	6V-2610	[1]	FITTING
5.	127-9323	[2]	BRACKET AS
			(EACH INCLUDES)
	8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
6.	191-3645	[1]	RESERVOIR
7.	450-3729 CY	[1]	AIR DRYER GP
8.	260-9133	[1]	PLATE
9.	301-3170	[1]	TUBE
10.	342-1548 I	[1]	HOSE AS
11.	344-9192 I	[1]	HOSE AS
12.	174-5907	[1]	CLIP (LOOP)
13.	205-7299	[5]	CLIP (LOOP)
14.	302-3908	[1]	SPACER (11X20X30-MM THK)
15.	6V-7535	[1]	ELBOW-PIPE
16.	3J-5390	[1]	PLUG (3/8-18-THD)
17.	4D-7733	[7]	CLIP (LOOP)
18.	4S-4455	[1]	CLIP
19.	5C-6565	[3]	BOLT (1/2-13X1.125-IN)
20.	5K-8451	[1]	CLIP (LOOP)
21.	5P-7854	[3]	CLIP (LOOP)
22.	7D-4903	[2]	ADAPTER
23.	7D-0215	[1]	CONNECTOR-PIPE
24.	8T-4121 C	[18]	WASHER-HARD (11X21X2.5-MM THK)
25.	8T-4133 CM	[5]	NUT (M10X1.5-THD)
26.	8T-4136 CM	[6]	BOLT (M10X1.5X25-MM)
27.	8T-4137 M	[5]	BOLT (M10X1.5X20-MM)
28.	8T-4195 M	[3]	BOLT (M10X1.5X30-MM)
29.	8T-4223	[3]	WASHER-HARD (13.5X25.5X3-MM THK)
30.	8T-4224	[2]	WASHER-HARD (8.8X16X2-MM THK)
31.	8T-6466 M	[1]	BOLT (M10X1.5X60-MM)
32.	8T-7547 M	[2]	BOLT (M8X1.25X30-MM)
33.	9L-3560	[2]	ELBOW
34.	9M-8406 C	[6]	CLIP (LOOP)
35.	8I-1362 E		HOSE (131-CM)
36.	8W-8528 C	[2]	SLEEVE
37.	7X-7729 C	[2]	WASHER (11X25X3-MM THK)
38.	4K-8864 C	[1]	CLIP (LOOP)
	C		CHANGE FROM PREVIOUS TYPE
	E		ORDER BY THE CENTIMETER
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP49880772

311-2739: DRYER & LINES GP-AIR

DRYER & LINES GP-AIR

311-2739 DRYER & LINES GP-AIR
S/N JBP153-UP
PART OF 311-2738 DRYER & LINES GP-AIR
Type 3

i05899725 SEBP4988

For full view, you need register

Parts for your 160K MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2S-3440	[1]	CLAMP-HOSE
2.	5P-4401	[1]	CONNECTOR-AIR BRAKE
3.	5P-4424	[1]	ELBOW-AIR BRAKE
4.	3B-7733 C	[1]	FITTING
5.	127-9323	[2]	BRACKET AS
			(EACH INCLUDES)
	8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
6.	191-3645	[1]	RESERVOIR
7.	450-3729 Y	[1]	AIR DRYER GP
8.	260-9133	[1]	PLATE
9.	301-3170	[1]	TUBE
10.	454-7215 CI	[1]	HOSE AS
11.	344-9192 I	[1]	HOSE AS
12.	174-5907	[1]	CLIP (LOOP)
13.	205-7299	[5]	CLIP (LOOP)
14.	302-3908	[1]	SPACER (11X20X30-MM THK)
15.	3D-7587 C	[1]	ELBOW
16.	3J-5390	[1]	PLUG (3/8-18-THD)
17.	4D-7733 C	[8]	CLIP (LOOP)
18.	4S-4455	[1]	CLIP
19.	5C-6565	[3]	BOLT (1/2-13X1.125-IN)
21.	5P-7854	[3]	CLIP (LOOP)
23.	7D-0215	[1]	CONNECTOR-PIPE
24.	8T-4121	[18]	WASHER-HARD (11X21X2.5-MM THK)
25.	8T-4133 M	[5]	NUT (M10X1.5-THD)
26.	8T-4136 M	[10]	BOLT (M10X1.5X25-MM)
27.	8T-4137 CM	[1]	BOLT (M10X1.5X20-MM)
28.	8T-4195 M	[3]	BOLT (M10X1.5X30-MM)
29.	8T-4223	[3]	WASHER-HARD (13.5X25.5X3-MM THK)
30.	8T-4224	[2]	WASHER-HARD (8.8X16X2-MM THK)
31.	8T-6466 M	[1]	BOLT (M10X1.5X60-MM)
32.	8T-7547 M	[2]	BOLT (M8X1.25X30-MM)
33.	9L-3560	[2]	ELBOW
34.	9M-8406	[6]	CLIP (LOOP)
35.	8I-1362 E		HOSE (131-CM)
36.	8W-8528	[2]	SLEEVE
37.	7X-7729	[2]	WASHER (11X25X3-MM THK)
38.	4K-8864	[1]	CLIP (LOOP)
	C		CHANGE FROM PREVIOUS TYPE
	E		ORDER BY THE CENTIMETER
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP49880773

455-0163: DRYER & LINES GP-AIR

DRYER & LINES GP-AIR

455-0163 DRYER & LINES GP-AIR
S/N JBP1-UP
PART OF 455-0159 AIR DRYER GP
Type 1

i05873843 SEBP4988

4550163 DRYER & LINES GP-AIR Parts scheme

For full view, you need register

Parts for your 160K MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3D-7587	[1]	ELBOW
2.	8W-8528	[2]	SLEEVE
3.	127-9323	[2]	BRACKET AS
			(EACH INCLUDES)
	8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
4.	301-3170	[1]	TUBE
5.	515-1616 I	[1]	HOSE AS
6.	450-3729 Y	[1]	AIR DRYER GP
7.	454-7215 I	[1]	HOSE AS
8.	454-7216 I	[1]	HOSE AS
9.	174-5907	[1]	CLIP (LOOP)
10.	205-7299	[5]	CLIP (LOOP)
11.	2S-3440	[1]	CLAMP-HOSE
12.	302-3908	[1]	SPACER (11X20X30-MM THK)
13.	344-5675 M	[7]	NUT (M10X1.5-THD)
14.	3B-7733	[1]	FITTING
15.	4D-7733	[8]	CLIP (LOOP)
16.	4K-8864	[1]	CLIP (LOOP)
17.	4S-4455	[1]	CLIP
18.	5C-6565	[3]	BOLT (1/2-13X1.125-IN)
19.	5P-4401	[1]	CONNECTOR-AIR BRAKE
20.	5P-4424	[1]	ELBOW-AIR BRAKE
21.	5P-7854	[3]	CLIP (LOOP)
22.	7D-0215	[1]	CONNECTOR-PIPE
23.	7D-7233	[1]	CLIP (LOOP)
24.	8T-4121	[23]	WASHER-HARD (11X21X2.5-MM THK)
25.	8T-4136 M	[10]	BOLT (M10X1.5X25-MM)
26.	8T-4137 M	[1]	BOLT (M10X1.5X20-MM)
28.	8T-4195 M	[4]	BOLT (M10X1.5X30-MM)
29.	8T-4223	[3]	WASHER-HARD (13.5X25.5X3-MM THK)
30.	197-7481 M	[1]	STUD (M10X1.5X83-MM)
31.	9L-3560	[2]	ELBOW
32.	9M-8406	[7]	CLIP (LOOP)
33.	8I-1362 E		HOSE (130-CM)
	E		ORDER BY THE CENTIMETER
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP49880774

455-0163: DRYER & LINES GP-AIR

DRYER & LINES GP-AIR

455-0163 DRYER & LINES GP-AIR
S/N JBP1-UP
PART OF 455-0159 AIR DRYER GP
Type 2

i07443685 SEBP4988

For full view, you need register

Parts for your 160K MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3D-7587 C	[2]	ELBOW
2.	303-2348 C	[1]	TUBE
3.	327-0727 C	[1]	PLATE
4.	327-0728 C	[1]	PLATE AS
	8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
5.	450-3729 Y	[1]	AIR DRYER GP
6.	528-6213 CI	[1]	HOSE AS
7.	528-6214 CI	[1]	HOSE AS
8.	528-6215 CI	[1]	HOSE AS
9.	0A-2926 C	[1]	FITTING
10.	205-7299 C	[3]	CLIP (LOOP)(LOOP)
11.	228-7090 C	[1]	SEAL-O-RING
12.	2S-3440	[1]	CLAMP-HOSE
13.	344-5675 CM	[2]	NUT (M10X1.5-THD)
14.	5B-1585 C	[2]	ELBOW
15.	5K-8451 C	[2]	CLIP (LOOP)(LOOP)
16.	5P-4424 C	[2]	ELBOW-AIR BRAKE
17.	5P-7854	[3]	CLIP (LOOP)
18.	6V-1889 C	[1]	CLIP (LOOP)
19.	7D-0215	[1]	CONNECTOR-PIPE
20.	8C-6872 C	[1]	CONNECTOR
21.	8T-4121 C	[14]	WASHER-HARD (11X21X2.5-MM THK)
22.	8T-4136 CM	[10]	BOLT (M10X1.5X25-MM)
23.	8T-4223	[3]	WASHER-HARD (13.5X25.5X3-MM THK)
24.	8T-8917 C	[3]	BOLT (1/2-13X1.25-IN)
25.	9L-3560	[2]	ELBOW
26.	9M-8406 C	[3]	CLIP (LOOP)
27.	8I-1362 CE		HOSE (131-CM)
28.	217-4369	[1]	BRACKET AS
29.	174-5907	[1]	CLIP (LOOP)
30.	8T-4195 M	[2]	BOLT (M10X1.5X30-MM)
	C		CHANGE FROM PREVIOUS TYPE
	E		ORDER BY THE CENTIMETER
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP49880775

434-8068: LINES GP-AIR TANK

LINES GP-AIR TANK

434-8068 LINES GP-AIR TANK
S/N JBP1-UP
PART OF 435-8186 HYDRAULIC AR

i06107550 SEBP4988

For full view, you need register

Parts for your 160K MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3D-7587	[1]	ELBOW
2.	4P-7048	[1]	BRACKET
3.	5F-5434	[1]	VALVE AS-VENT
4.	205-7187 J	[1]	GOVERNOR AS (AIR COMPRESSOR)
	2S-2923	[1]	COVER AS (GOVERNOR)
5.	292-4772	[1]	PLATE-SUPPORT
6.	515-1617 I	[1]	HOSE AS
7.	515-1618 I	[1]	HOSE AS
8.	091-9035	[1]	SPACER (11X25X20-MM THK)
9.	205-7299	[4]	CLIP (LOOP)(LOOP)
10.	344-5673 M	[2]	NUT (M6X1-THD)
11.	344-5675 M	[4]	NUT (M10X1.5-THD)
12.	3E-6909	[1]	CLIP (LOOP)(LOOP)
13.	4D-2560	[2]	CONNECTOR-PIPE
14.	4D-7388	[1]	CLIP (LOOP)(LOOP)
15.	4D-7733	[1]	CLIP (LOOP)
16.	4H-6147	[1]	CONNECTOR
17.	4S-1936	[1]	CLIP
18.	4S-7606	[1]	ELBOW
19.	7D-7233	[1]	CLIP (LOOP)(LOOP)
20.	7X-7729	[3]	WASHER (11X25X3-MM THK)
21.	8L-5008	[1]	ELBOW-PIPE
22.	8T-4121	[8]	WASHER-HARD (11X21X2.5-MM THK)
23.	8T-4136 M	[4]	BOLT (M10X1.5X25-MM)
24.	8T-4182 M	[1]	BOLT (M10X1.5X45-MM)
25.	8T-4186 M	[1]	BOLT (M10X1.5X40-MM)
26.	8T-4195 M	[1]	BOLT (M10X1.5X30-MM)
27.	8T-6757	[4]	PLUG-PIPE
28.	8T-6974 M	[2]	BOLT (M6X1X80-MM)
29.	9M-4594	[1]	SPACER (0.406X0.875X0.75-IN THK)
30.	9X-8256	[4]	WASHER (6.6X12X2-MM THK)

			AVAILABLE REPAIR KIT(S):
	9M-0402 J	[1]	KIT-GOVERNOR OVERHAUL (AIR COMPRESSOR)
			(INCLUDES GROMMETS, FILTERS, COVER, RING, GASKET, SPRING & VALVE)
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	J		KIT MARKED "J" SERVICES PARTS MARKED "J"
	M		METRIC PART

#SEBP49880776

434-8068: LINES GP-AIR TANK

LINES GP-AIR TANK

434-8068 LINES GP-AIR TANK
S/N JBP1-3177
PART OF 435-8186 HYDRAULIC AR

i07245624 SEBP4988

For full view, you need register

Parts for your 160K MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	5F-5434	[1]	VALVE AS-VENT
2.	205-7187 J	[1]	GOVERNOR AS (AIR COMPRESSOR)
	2S-2923 J	[1]	COVER AS (GOVERNOR)
3.	292-4772	[1]	PLATE-SUPPORT
4.	528-6216 CI	[1]	HOSE AS
5.	528-6353 CI	[1]	HOSE AS
6.	091-9035	[1]	SPACER (11X25X20-MM THK)
7.	205-7299 C	[1]	CLIP (LOOP)(LOOP)
8.	344-5673 M	[2]	NUT (M6X1-THD)
9.	344-5675 CM	[2]	NUT (M10X1.5-THD)
10.	4D-2560	[2]	CONNECTOR-PIPE
11.	4D-7388	[1]	CLIP (LOOP)(LOOP)
12.	4H-6147	[1]	CONNECTOR
13.	4S-7606	[1]	ELBOW
14.	5K-8451 C	[4]	CLIP (LOOP)
15.	7D-7233	[1]	CLIP (LOOP)(LOOP)
16.	7X-7729 C	[2]	WASHER (11X25X3-MM THK)
17.	8L-5008	[1]	ELBOW-PIPE
18.	8T-4121 C	[5]	WASHER-HARD (11X21X2.5-MM THK)
19.	8T-4136 CM	[3]	BOLT (M10X1.5X25-MM)
20.	8T-4186 M	[1]	BOLT (M10X1.5X40-MM)
21.	8T-4195 M	[1]	BOLT (M10X1.5X30-MM)
22.	8T-6757	[4]	PLUG-PIPE
23.	8T-6974 M	[2]	BOLT (M6X1X80-MM)
24.	9X-8256	[4]	WASHER (6.6X12X2-MM THK)

			AVAILABLE REPAIR KIT(S):
	9M-0402 J	[1]	KIT-GOVERNOR OVERHAUL (AIR COMPRESSOR)
			(INCLUDES GROMMETS, FILTERS, COVER, RING, GASKET, SPRING & VALVE)
	C		CHANGE FROM PREVIOUS TYPE
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	J		KIT MARKED "J" SERVICES PARTS MARKED "J"
	M		METRIC PART

#SEBP49880777

434-8068: LINES GP-AIR TANK

LINES GP-AIR TANK

434-8068 LINES GP-AIR TANK
S/N JBP3178-UP
PART OF 435-8186 HYDRAULIC AR

i07440069 SEBP4988

For full view, you need register

Parts for your 160K MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	5F-5434	[1]	VALVE AS-VENT
2.	205-7187 J	[1]	GOVERNOR AS (AIR COMPRESSOR)
	2S-2923	[1]	COVER AS (GOVERNOR)
3.	292-4772	[1]	PLATE-SUPPORT
4.	091-9035	[1]	SPACER (11X25X20-MM THK)
5.	205-7299 C	[2]	CLIP (LOOP)(LOOP)
6.	301-6395 CI	[1]	HOSE AS
7.	344-5673 M	[2]	NUT (M6X1-THD)
8.	344-5675 CM	[3]	NUT (M10X1.5-THD)
9.	3E-6909 C	[1]	CLIP (LOOP)(LOOP)
10.	4D-2560 C	[1]	CONNECTOR-PIPE
11.	4D-7388	[1]	CLIP (LOOP)(LOOP)
12.	4H-6147	[1]	CONNECTOR
13.	4S-7606 C	[2]	ELBOW
14.	528-6353 I	[1]	HOSE AS
15.	5K-8451	[4]	CLIP (LOOP)(LOOP)
16.	7D-7233	[1]	CLIP (LOOP)(LOOP)
17.	7X-7729	[2]	WASHER (11X25X3-MM THK)
18.	8L-5008	[1]	ELBOW-PIPE
19.	8T-4121 C	[7]	WASHER-HARD (11X21X2.5-MM THK)
20.	8T-4136 CM	[2]	BOLT (M10X1.5X25-MM)
21.	8T-4186 M	[1]	BOLT (M10X1.5X40-MM)
22.	8T-4195 CM	[3]	BOLT (M10X1.5X30-MM)
23.	8T-6757	[4]	PLUG-PIPE
24.	8T-6974 M	[2]	BOLT (M6X1X80-MM)
25.	9X-8256	[4]	WASHER (6.6X12X2-MM THK)

			AVAILABLE REPAIR KIT(S):
	9M-0402 J	[1]	KIT-GOVERNOR OVERHAUL (AIR COMPRESSOR)
			(INCLUDES GROMMETS, FILTERS, COVER, RING, GASKET, SPRING & VALVE)
	C		CHANGE FROM PREVIOUS TYPE
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	J		KIT MARKED "J" SERVICES PARTS MARKED "J"
	M		METRIC PART

#SEBP49880778

314-9370: TANK GP-AIR

TANK GP-AIR

314-9370 TANK GP-AIR
S/N JBP1-UP
PART OF 274-7941, 343-7206 GENERAL AR

i03246383 SEBP4988

For full view, you need register

Parts for your 160K MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1P-7115	[4]	GROMMET AS
2.	2G-1034	[2]	VALVE-AIR RELIEF
3.	2H-3940	[1]	ELBOW
4.	2H-9091	[1]	CONNECTOR-PIPE
5.	3D-7587	[1]	ELBOW
6.	4P-7048	[1]	BRACKET
7.	5F-5434	[1]	VALVE AS-VENT
9.	8M-3368	[2]	VALVE-CHECK
10.	8W-7915	[2]	SHIM (2-MM THK)
11.	8W-8496	[2]	PLATE
12.	8W-8528	[2]	SLEEVE
13.	8W-8575	[1]	RESERVOIR
14.	9D-6663	[2]	VALVE-DRAIN
15.	9M-4594	[1]	SPACER (0.406X0.875X0.75-IN THK)
16.	004-5933	[1]	TEE-PIPE
17.	205-7187 J	[1]	GOVERNOR AS (AIR COMPRESSOR)
	2S-2923	[1]	COVER AS
18.	217-4369	[1]	BRACKET AS
19.	292-4772	[1]	PLATE-SUPPORT
20.	334-5268	[1]	HOSE AS
21.	334-5270	[1]	HOSE AS
22.	342-0724 I	[1]	HOSE AS
23.	342-0725 I	[1]	HOSE AS
24.	002-6453	[2]	ELBOW
25.	124-1479	[1]	CLIP
26.	205-7299	[3]	CLIP (LOOP)
27.	3D-8913	[2]	ELBOW
28.	3E-6909	[1]	CLIP (LOOP)
29.	4D-0577	[1]	ELBOW
30.	4D-2560	[2]	CONNECTOR-PIPE
31.	4D-7388	[1]	CLIP (LOOP)
32.	4D-7733	[2]	CLIP (LOOP)
33.	4H-6147	[1]	CONNECTOR
34.	4K-8864	[1]	CLIP (LOOP)
35.	4S-1936	[2]	CLIP
36.	4S-7606	[1]	ELBOW
37.	5C-2890 M	[2]	NUT (M6X1-THD)
38.	5P-8998	[2]	FITTING
39.	5S-7383	[4]	BOLT (3/8-16X1.75-IN)
41.	6V-8801	[4]	NUT (3/8-16-THD)
42.	7C-6921	[1]	SPACER (11X20X22.8-MM THK)
43.	7D-4903	[2]	ADAPTER
44.	7D-7233	[2]	CLIP (LOOP)
45.	7F-9311	[4]	FITTING
46.	7X-0578	[8]	WASHER-HARD (10.2X32X2.5-MM THK)
47.	7X-7729	[4]	WASHER (11X25X3-MM THK)
48.	8L-5008	[1]	ELBOW-PIPE
49.	8T-4121	[18]	WASHER-HARD (11X21X2.5-MM THK)
50.	8T-4133 M	[7]	NUT (M10X1.5-THD)
51.	8T-4136 M	[12]	BOLT (M10X1.5X25-MM)
52.	8T-4182 M	[1]	BOLT (M10X1.5X45-MM)
53.	8T-4186 M	[1]	BOLT (M10X1.5X40-MM)
54.	8T-4195 M	[1]	BOLT (M10X1.5X30-MM)
55.	8T-4896	[4]	WASHER-HARD (10.2X18.5X2.5-MM THK)
56.	8T-6757	[4]	PLUG-PIPE
57.	8T-6974 M	[2]	BOLT (M6X1X80-MM)
58.	9M-8406	[5]	CLIP (LOOP)
59.	9X-8256	[4]	WASHER (6.6X12X2-MM THK)
60.	5L-5502	[1]	FITTING

			AVAILABLE REPAIR KIT(S):
	9M-0402 J	[1]	KIT-GOVERNOR OVERHAUL (AIR COMPRESSOR)
			(INCLUDES GROMMETS, FILTERS, SPRING & VALVE)
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	J		KIT MARKED J SERVICES PART(S) MARKED J
	M		METRIC PART

#SEBP49880779

314-9370: TANK GP-AIR

TANK GP-AIR

314-9370 TANK GP-AIR
S/N JBP107-UP
PART OF 343-7206 GENERAL AR
Type 1

i05725211 SEBP4988

For full view, you need register

Parts for your 160K MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1P-7115	[4]	GROMMET AS
2.	2G-1034	[2]	VALVE-AIR RELIEF
3.	2H-3940	[1]	ELBOW
4.	2H-9091	[1]	CONNECTOR-PIPE
5.	3D-7587	[1]	ELBOW
6.	4P-7048	[1]	BRACKET
7.	5F-5434	[1]	VALVE AS-VENT
9.	8M-3368	[2]	VALVE-CHECK
10.	8W-7915	[2]	SHIM (2-MM THK)
11.	8W-8496	[2]	PLATE
13.	8W-8575	[1]	RESERVOIR
14.	9D-6663	[2]	VALVE-DRAIN
15.	9M-4594	[1]	SPACER (0.406X0.875X0.75-IN THK)
16.	004-5933	[1]	TEE-PIPE
17.	205-7187 J	[1]	GOVERNOR AS (AIR COMPRESSOR)
	2S-2923	[1]	COVER AS
18.	217-4369	[1]	BRACKET AS
19.	292-4772	[1]	PLATE-SUPPORT
20.	334-5268	[1]	HOSE AS
21.	334-5270	[1]	HOSE AS
23.	342-0725 I	[1]	HOSE AS
24.	002-6453	[2]	ELBOW
26.	205-7299	[3]	CLIP (LOOP)
27.	3D-8913	[2]	ELBOW
28.	3E-6909	[1]	CLIP (LOOP)
29.	4D-0577	[1]	ELBOW
30.	4D-2560	[2]	CONNECTOR-PIPE
31.	4D-7388	[1]	CLIP (LOOP)
32.	4D-7733 C	[1]	CLIP (LOOP)
33.	4H-6147	[1]	CONNECTOR
35.	4S-1936 C	[1]	CLIP
36.	4S-7606	[1]	ELBOW
37.	5C-2890 M	[2]	NUT (M6X1-THD)
38.	5P-8998	[2]	FITTING
39.	5S-7383	[4]	BOLT (3/8-16X1.75-IN)
41.	6V-8801	[4]	NUT (3/8-16-THD)
42.	7C-6921	[1]	SPACER (11X20X22.8-MM THK)
43.	7D-4903	[2]	ADAPTER
44.	7D-7233	[2]	CLIP (LOOP)
45.	7F-9311	[4]	FITTING
46.	7X-0578	[8]	WASHER-HARD (10.2X32X2.5-MM THK)
47.	7X-7729 C	[3]	WASHER (11X25X3-MM THK)
48.	8L-5008	[1]	ELBOW-PIPE
49.	8T-4121 C	[12]	WASHER-HARD (11X21X2.5-MM THK)
50.	8T-4133 CM	[4]	NUT (M10X1.5-THD)
51.	8T-4136 CM	[8]	BOLT (M10X1.5X25-MM)
52.	8T-4182 M	[1]	BOLT (M10X1.5X45-MM)
53.	8T-4186 M	[1]	BOLT (M10X1.5X40-MM)
54.	8T-4195 M	[1]	BOLT (M10X1.5X30-MM)
55.	8T-4896	[4]	WASHER-HARD (10.2X18.5X2.5-MM THK)
56.	8T-6757	[4]	PLUG-PIPE
57.	8T-6974 M	[2]	BOLT (M6X1X80-MM)
59.	9X-8256	[4]	WASHER (6.6X12X2-MM THK)
60.	5L-5502	[1]	FITTING
61.	174-5907 C	[1]	CLIP (LOOP)

			AVAILABLE REPAIR KIT(S):
	9M-0402 J	[1]	KIT-GOVERNOR OVERHAUL (AIR COMPRESSOR)
			(INCLUDES GROMMETS, FILTERS, SPRING & VALVE)
	C		CHANGE FROM PREVIOUS TYPE
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	J		KIT MARKED J SERVICES PART(S) MARKED J
	M		METRIC PART