AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

490-1163 VALVE & LINKAGE GP S/N JBP1-UP PART OF 434-6596 VALVE & LINKAGE GP 160K MOTOR GRADER


HYDRAULIC SYSTEM
VALVE & LINKAGE GP
VALVE GP-BANK

MOTOR GRADER 160K MOTOR GRADER JBP
 160K Motor Grader JBP00001-UP (MACHINE) POWERED BY C7 Engine SEBP4988 160K JBP   (2009)

HYDRAULIC SYSTEM

VALVE & LINKAGE GP
VALVE & LINKAGE GP
434-6702 VALVE & LINKAGE GP
434-6702 VALVE & LINKAGE GP
VALVE & LINKAGE GP
490-1163 VALVE & LINKAGE GP
VALVE & LINKAGE GP
516-4143 VALVE & LINKAGE GP
VALVE & LINKAGE GP
516-4143 VALVE & LINKAGE GP
541-7426 VALVE & LINKAGE GP
 

#SEBP49880950
 

490-1163: VALVE & LINKAGE GP

490-1163 VALVE & LINKAGE GP
S/N JBP1-UP
PART OF 434-6596 VALVE & LINKAGE GP
i07191981 SEBP4988
4901163 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 160K MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2G-6740 [1] KNOB-RIPPER  
2. 2G-6747 [1] KNOB-BLADE TIP  
3. 2G-6748 [1] KNOB-BLADE LIFT  
4. 2G-6749 [1] KNOB-SIDESHIFT  
5. 2G-6751 [1] KNOB-CIRCLE DRIVE  
6. 2G-6752 [1] KNOB-ARTICULATION  
7. 2G-6754 [1] KNOB (BULLDOZER LIFT, PLOW)  
8. 2G-6755 [1] KNOB-CENTERSHIFT  
9. 2G-6756 [1] KNOB-WHEEL LEAN  
10. 2G-6757 [1] KNOB-BLADE LIFT  
11. 2G-7107 [1] KNOB-WING LIFT  
12. 2G-7108 [1] KNOB-WING TILT  
13. 8D-5636 B [2] SHIM (0.254-MM THK)  
14. 8D-5637 B [2] SHIM (0.762-MM THK)  
15. 8D-5640 [15] BEARING  
16. 8W-0456 [4] SHAFT  
17. 112-9164 [5] BOOT  
18. 117-0472 [1] KNOB (DOZER ANGLE, SNOW PLOW)  
19. 490-1103 [2] LEVER  
20. 490-1104 [2] LEVER  
21. 490-1105 [2] LEVER  
22. 490-1106 [2] LEVER  
23. 490-1107 [3] LEVER  
24. 490-1108 [2] RETAINER  
25. 490-1110 Y [13] ROD AS-ADJUSTING  
26. 490-1151 [2] LEVER  
27. 512-5977 [2] SPACER  
28. 137-4516 [1] SHAFT  
29. 3F-9556 [26] LOCKWASHER  
30. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
31. 6L-1962 [13] NUT-JAM (3/8-24-THD)  
32. 7X-0291 [2] BOLT (3/8-16X3.75-IN)  
33. 8D-5641 [13] BEARING  
34. 8T-9043 [26] BOLT (5/16-18X0.875-IN)  
35. 9X-2027 [1] WASHER (11X18X2-MM THK)  
  B   USE AS REQUIRED
  Y   SEPARATE ILLUSTRATION
 

#SEBP49880951
 

516-4143: VALVE & LINKAGE GP

516-4143 VALVE & LINKAGE GP
S/N JBP1-10099
PART OF 516-4155 CONTROL AR-HYDRAULIC
i06871216 SEBP4988
5164143 VALVE & LINKAGE GP Parts scheme 5164143 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 160K MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2G-6740 [1] KNOB-RIPPER  
2. 2G-6747 [1] KNOB-BLADE TIP  
3. 2G-6748 [1] KNOB-BLADE LIFT  
4. 2G-6749 [1] KNOB-SIDESHIFT  
5. 2G-6751 [1] KNOB-CIRCLE DRIVE  
6. 2G-6752 [1] KNOB-ARTICULATION  
7. 2G-6754 [1] KNOB (BULLDOZER LIFT, PLOW)  
8. 2G-6755 [1] KNOB-CENTERSHIFT  
9. 2G-6756 [1] KNOB-WHEEL LEAN  
10. 2G-6757 [1] KNOB-BLADE LIFT  
11. 2G-7107 [1] KNOB-WING LIFT  
12. 2G-7108 [1] KNOB-WING TILT  
13. 6B-0933 [4] SPACER (10.31X19.05X6.35-MM THK)  
14. 6L-1962 [13] NUT-JAM (3/8-24-THD)  
15. 8D-5632 [2] LEVER  
16. 8D-5633 [2] LEVER  
17. 8D-5634 [2] LEVER  
18. 8D-5636 B [10] SHIM (0.254-MM THK)  
19. 8D-5637 B [10] SHIM (0.762-MM THK)  
20. 8D-5640 [15] BEARING  
21. 8W-0456 [4] SHAFT  
22. 8X-4277 [13] ROD AS  
    (EACH INCLUDES)
  6V-8186 [1] NUT-FULL (5/16-24-THD)  
  7H-3641 [1] END-ROD (5/16-24-THD)  
  8L-8598 [1] ROD END  
  146-0705 [1] ROD  
23. 8X-5499 [2] RETAINER  
24. 9M-1853 [6] MOUNTING  
25. 101-2457 [2] LEVER  
26. 101-2458 [3] LEVER  
27. 103-1597 [2] LEVER  
28. 104-7419 [1] PLATE AS (RH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
29. 104-7429 [2] PLATE  
30. 104-7740 [1] PLATE AS (LH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
31. 117-0472 [1] KNOB (DOZER ANGLE, SNOW PLOW)  
32. 137-4515 [2] BUSHING  
33. 511-0964 Y [1] VALVE GP-BANK 7 (LH)(LH)  
34. 511-0965 Y [1] VALVE GP-BANK 6 (RH)  
35. 137-4516 [1] SHAFT  
36. 3F-9556 [26] LOCKWASHER  
37. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
38. 5P-1076 [6] WASHER-HARD (13.5X30X4-MM THK)  
39. 5P-2424 [6] BOLT (1/2-13X2.25-IN)  
40. 6V-8188 [2] NUT (1/2-13-THD)  
41. 7X-0291 [2] BOLT (3/8-16X3.75-IN)  
42. 8D-5641 [13] BEARING  
43. 8F-6437 [6] WASHER (13.5X50.8X4.76-MM THK)  
44. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
45. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
46. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
47. 8T-9043 [26] BOLT (5/16-18X0.875-IN)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP49880952
 

516-4143: VALVE & LINKAGE GP

516-4143 VALVE & LINKAGE GP
S/N JBP10100-UP
PART OF 516-4155 CONTROL AR-HYDRAULIC
i06916297 SEBP4988
5164143 VALVE & LINKAGE GP Parts scheme 5164143 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 160K MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2G-6740 [1] KNOB-RIPPER  
2. 2G-6747 [1] KNOB-BLADE TIP  
3. 2G-6748 [1] KNOB-BLADE LIFT  
4. 2G-6749 [1] KNOB-SIDESHIFT  
5. 2G-6751 [1] KNOB-CIRCLE DRIVE  
6. 2G-6752 [1] KNOB-ARTICULATION  
7. 2G-6754 [1] KNOB (BULLDOZER LIFT, PLOW)  
8. 2G-6755 [1] KNOB-CENTERSHIFT  
9. 2G-6756 [1] KNOB-WHEEL LEAN  
10. 2G-6757 [1] KNOB-BLADE LIFT  
11. 2G-7107 [1] KNOB-WING LIFT  
12. 2G-7108 [1] KNOB-WING TILT  
13. 6B-0933 [4] SPACER (10.31X19.05X6.35-MM THK)  
14. 6L-1962 [13] NUT-JAM (3/8-24-THD)  
15. 490-1106 C [2] LEVER  
16. 490-1105 C [2] LEVER  
17. 490-1104 C [2] LEVER  
18. 8D-5636 B [10] SHIM (0.254-MM THK)  
19. 8D-5637 B [10] SHIM (0.762-MM THK)  
20. 8D-5640 [15] BEARING  
21. 8W-0456 [4] SHAFT  
22. 490-1110 CY [13] ROD AS-ADJUSTING  
23. 490-1108 C [2] RETAINER  
24. 9M-1853 [6] MOUNTING  
25. 490-1103 C [2] LEVER  
26. 490-1107 C [3] LEVER  
27. 490-1151 C [2] LEVER  
28. 104-7419 [1] PLATE AS (RH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
29. 104-7429 [2] PLATE  
30. 104-7740 [1] PLATE AS (LH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
31. 117-0472 [1] KNOB (DOZER ANGLE, SNOW PLOW)  
32. 512-5977 C [2] SPACER  
33. 511-0964 Y [1] VALVE GP-BANK 7 (LH)(LH)  
34. 511-0965 Y [1] VALVE GP-BANK 6 (RH)  
35. 137-4516 [1] SHAFT  
36. 3F-9556 [26] LOCKWASHER  
37. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
38. 5P-1076 [6] WASHER-HARD (13.5X30X4-MM THK)  
39. 5P-2424 [6] BOLT (1/2-13X2.25-IN)  
40. 6V-8188 [2] NUT (1/2-13-THD)  
41. 7X-0291 [2] BOLT (3/8-16X3.75-IN)  
42. 8D-5641 [13] BEARING  
43. 8F-6437 [6] WASHER (13.5X50.8X4.76-MM THK)  
44. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
45. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
46. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
47. 8T-9043 [26] BOLT (5/16-18X0.875-IN)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP49880953
 

541-7426: VALVE & LINKAGE GP

541-7426 VALVE & LINKAGE GP
S/N JBP1-UP
i07640549 SEBP4988
  For full view, you need register

Parts for your 160K MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  490-1166 Y [1] LINKAGE GP-IMPLEMENT  
  532-8163 Y [1] MOUNTING GP-VALVE  
  6E-3038 Y [1] VALVE GP-BANK 4 (LH)  
  Y [1] VALVE GP-BANK 5  
  Y   SEPARATE ILLUSTRATION
 

#SEBP49880954
 

104-8672: VALVE GP-BANK 2

104-8672 VALVE GP-BANK 2 -LH
S/N JBP1-UP
PART OF 112-6795 VALVE & LINKAGE GP
i00125639 SEBP4988
1048672 VALVE GP-BANK 2 Parts scheme
  For full view, you need register

Parts for your 160K MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7X-2546 M [2] BOLT (M10X1.5X180-MM)  
2. 137-6720 M [1] BOLT (M10X1.5X160-MM)  
3. 102-8385 [1] MANIFOLD  
4. 101-0509 [5] SEAL-INTEGRAL  
5. 124-2883 Y [1] VALVE GP-CONTROL (BLADE LIFT)  
6. 111-9321 [2] SPACER  
7. 6E-3035 Y [1] VALVE GP-CONTROL (CIRCLE DRIVE)  
8. 101-9346 [1] COVER  
9. 8T-4186 M [3] BOLT (M10X1.5X40-MM)  
10. 222-4737 [1] PLUG AS  
  9S-4180 [1] PLUG  
  4J-7533 [1] SEAL-O-RING  
11. 8T-4896 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP49880955
 

104-8673: VALVE GP-BANK 3

104-8673 VALVE GP-BANK 3 -LH
S/N JBP1-UP
PART OF 112-6799 VALVE & LINKAGE GP
i00125640 SEBP4988
1048673 VALVE GP-BANK 3 Parts scheme
  For full view, you need register

Parts for your 160K MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7X-2546 M [2] BOLT (M10X1.5X180-MM)  
2. 137-6720 M [1] BOLT (M10X1.5X160-MM)  
3. 102-8385 [1] MANIFOLD  
4. 101-0509 [5] SEAL-INTEGRAL  
5. 124-2883 Y [1] VALVE GP-CONTROL (BLADE LIFT)  
6. 6E-3036 Y [1] VALVE GP-CONTROL (SIDESHIFT)  
7. 6E-3035 Y [1] VALVE GP-CONTROL (CIRCLE DRIVE)  
8. 111-9321 [1] SPACER  
9. 101-9346 [1] COVER  
10. 8T-4186 M [3] BOLT (M10X1.5X40-MM)  
11. 222-4737 [1] PLUG AS  
  9S-4180 [1] PLUG  
  4J-7533 [1] SEAL-O-RING  
12. 8T-4896 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP49880956
 

112-2580: VALVE GP-BANK 3

112-2580 VALVE GP-BANK 3 -LH
S/N JBP1-UP
PART OF 112-6804 VALVE & LINKAGE GP
i00488412 SEBP4988
1122580 VALVE GP-BANK 3 Parts scheme
  For full view, you need register

Parts for your 160K MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7X-2546 M [2] BOLT (M10X1.5X180-MM)  
2. 137-6720 M [1] BOLT (M10X1.5X160-MM)  
3. 102-8385 [1] MANIFOLD  
4. 101-0509 [6] SEAL-INTEGRAL  
5. 111-9321 [2] SPACER  
6. 6E-3035 Y [1] VALVE GP-CONTROL (CIRCLE DRIVE)  
7. 124-2883 Y [1] VALVE GP-CONTROL (BLADE LIFT)  
8. 107-0543 Y [1] VALVE GP-CONTROL (SCARIFIER)  
9. 101-9346 [1] COVER  
10. 222-4737 [1] PLUG AS  
  9S-4180 [1] PLUG  
  4J-7533 [1] SEAL-O-RING  
11. 8T-4896 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
12. 137-6719 M [3] BOLT (M10X1.5X80-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP49880957
 

112-2581: VALVE GP-BANK 3

112-2581 VALVE GP-BANK 3 -LH
S/N JBP1-UP
PART OF 112-6818 VALVE & LINKAGE GP
i00488423 SEBP4988
1122581 VALVE GP-BANK 3 Parts scheme
  For full view, you need register

Parts for your 160K MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7X-2546 M [2] BOLT (M10X1.5X180-MM)  
2. 137-6720 M [1] BOLT (M10X1.5X160-MM)  
3. 102-8385 [1] MANIFOLD  
4. 101-0509 [6] SEAL-INTEGRAL  
5. 111-9321 [2] SPACER  
6. 6E-3035 Y [1] VALVE GP-CONTROL (CIRCLE DRIVE)  
7. 124-2883 Y [1] VALVE GP-CONTROL (BLADE LIFT)  
8. 107-0545 Y [1] VALVE GP-CONTROL (RIPPER, LH)(RIPPER)  
9. 101-9346 [1] COVER  
10. 222-4737 [1] PLUG AS  
  9S-4180 [1] PLUG  
  4J-7533 [1] SEAL-O-RING  
11. 8T-4896 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
12. 137-6719 M [3] BOLT (M10X1.5X80-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP49880958
 

124-3325: VALVE GP-BANK 4

124-3325 VALVE GP-BANK 4 -RH
S/N JBP1-UP
PART OF 112-6795, 112-6799, 112-6804, 112-6818, 115-0804, 115-0808, 115-0811, 130-0464, 130-7603, 342-2154, 342-2640, 434-6587 VALVE & LINKAGE GP
i00126115 SEBP4988
1243325 VALVE GP-BANK 4 Parts scheme
  For full view, you need register

Parts for your 160K MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7X-2546 M [2] BOLT (M10X1.5X180-MM)  
2. 8T-6408 M [1] BOLT (M10X1.5X160-MM)  
3. 102-6238 [1] MANIFOLD  
4. 101-0509 [5] SEAL-INTEGRAL  
5. 6E-3028 Y [1] VALVE GP-CONTROL (ARTICULATION)  
6. 6E-3029 Y [1] VALVE GP-CONTROL (CENTERSHIFT)  
7. 6E-3030 Y [1] VALVE GP-CONTROL (WHEEL LEAN)  
8. 124-2884 Y [1] VALVE GP-CONTROL (BLADE LIFT)  
9. 101-9346 [1] COVER  
10. 8T-4186 M [3] BOLT (M10X1.5X40-MM)  
11. 366-4696 [1] PLUG AS  
  [1] PLUG (5/16-24-THD)  
  4J-7533 [1] SEAL-O-RING  
12. 8T-4896 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP49880959
 

124-3327: VALVE GP-BANK 4

124-3327 VALVE GP-BANK 4 -LH
S/N JBP107-10099
PART OF 115-0811, 342-2154 VALVE & LINKAGE GP
i00126117 SEBP4988
1243327 VALVE GP-BANK 4 Parts scheme
  For full view, you need register

Parts for your 160K MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7X-2546 M [2] BOLT (M10X1.5X180-MM)  
2. 137-6720 M [1] BOLT (M10X1.5X160-MM)  
3. 102-8385 [1] MANIFOLD  
4. 101-0509 [5] SEAL-INTEGRAL  
5. 124-2883 Y [1] VALVE GP-CONTROL (BLADE LIFT)  
6. 6E-3036 Y [1] VALVE GP-CONTROL (SIDESHIFT)  
7. 6E-3035 Y [1] VALVE GP-CONTROL (CIRCLE DRIVE)  
8. 6E-3034 Y [1] VALVE GP-CONTROL (BLADE TIP)  
9. 101-9346 [1] COVER  
10. 8T-4186 M [3] BOLT (M10X1.5X40-MM)  
11. 8T-4896 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
12. 222-4737 [1] PLUG AS  
  4J-7533 [1] SEAL-O-RING  
  9S-4180 [1] PLUG  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Caterpillar Parts SIS Catalog 160K :

434-6702 VALVE & LINKAGE GP
VALVE & LINKAGE GP
434-6702 VALVE & LINKAGE GP
434-6701 VALVE & LINKAGE GP
VALVE & LINKAGE GP
434-6701 VALVE & LINKAGE GP
434-6596 VALVE & LINKAGE GP
VALVE & LINKAGE GP
434-6596 VALVE & LINKAGE GP
434-6595 VALVE & LINKAGE GP
VALVE & LINKAGE GP
434-6595 VALVE & LINKAGE GP
VALVE & LINKAGE GP
516-4143 VALVE & LINKAGE GP
VALVE & LINKAGE GP
516-4143 VALVE & LINKAGE GP
541-7426 VALVE & LINKAGE GP
VALVE GP-BANK 2
104-8672 VALVE GP-BANK 2
VALVE GP-BANK 3
104-8673 VALVE GP-BANK 3
VALVE GP-BANK 3
112-2580 VALVE GP-BANK 3
VALVE GP-BANK 3
112-2581 VALVE GP-BANK 3
VALVE GP-BANK 4
124-3325 VALVE GP-BANK 4

Truck sale:

Caterpillar 160K
 
Caterpillar 160K
- motor graders
CATERPILLAR INTERNATIONAL SERVICES DEL PERU S.A.
Caterpillar 160K, bergbau-motorgrader, Bau-Und Bergbauausrüstung
217.656 
Caterpillar 160K, bergbau-motorgrader, Bau-Und Bergbauausrüstung
- motor graders
TOROMONT CAT
Canada
Caterpillar 160K, Construction
139,838 
Caterpillar 160K, Construction
- motor graders
FINNING CANADA
Canada
 
 
Caterpillar 160K, motor graders, Construction
- motor graders
ZAHID TRACTOR & HEAVY MACHINERY COMPANY
Saudi Arabia
Caterpillar 160K, Construction
 
Caterpillar 160K, Construction
- motor graders
BARLOWORLD MONGOLIA LLC
Mongolia
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.