AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

282-2473 CONTROL GP-CLUTCH S/N JBP107-3159 PART OF 343-7206 GENERAL AR 160K MOTOR GRADER


OPERATOR STATION
CONTROL GP
CONTROL GP-HYDRAULIC LOCKOUT
CONTROL GP-STEERING
MACHINE ARRANGEMENT

MOTOR GRADER 160K MOTOR GRADER JBP
 160K Motor Grader JBP00001-UP (MACHINE) POWERED BY C7 Engine SEBP4988 160K JBP   (2009)

OPERATOR STATION

CONTROL GP
CONTROL GP-CLUTCH
282-2473 CONTROL GP-CLUTCH
CONTROL GP-CLUTCH
282-2473 CONTROL GP-CLUTCH
CONTROL GP-CLUTCH
282-2473 CONTROL GP-CLUTCH
CONTROL GP-CLUTCH
512-5908 CONTROL GP-CLUTCH
 

#SEBP49881110
 

282-2473: CONTROL GP-CLUTCH

282-2473 CONTROL GP-CLUTCH
S/N JBP107-3159
PART OF 343-7206 GENERAL AR
i04885893 SEBP4988
2822473 CONTROL GP-CLUTCH Parts scheme
  For full view, you need register

Parts for your 160K MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1F-4622 [2] BEARING AS-NEEDLE  
2. 5P-9209 [2] BEARING AS-NEEDLE  
3. 7V-0446 [2] CLIP  
4. 9J-8783 [1] SHIM (0.508-MM THK)  
5. 116-5710 [1] GROMMET  
6. 130-5300 [1] CLIP  
7. 149-2065 [1] SPRING  
8. 161-7062 [1] HOUSING  
9. 161-7063 [1] SHAFT  
10. 162-8218 [1] GASKET  
11. 162-8219 [1] COVER  
12. 169-0921 [1] ROD END (3/8-24 LH-THD)  
13. 362-2789 [1] ROD  
14. 172-4211 [1] SPACER (10.5X22X50.8-MM THK)  
15. 180-4027 [1] CAM  
16. 180-7147 [1] LEVER  
17. 190-3043 [1] BRACKET AS  
18. 206-3599 [1] LEVER  
19. 207-4922 [1] PEDAL-CLUTCH  
20. 266-1478 CY [1] SENSOR GP-POSITION (ROTARY)(CLUTCH CONTROL)  
21. 129-3173 [1] BOLT-12 POINT HEAD (3/8-16X1.25-IN)  
22. 142-0485 M [1] NUT (M10X1.5-THD)  
23. 1B-0676 [1] PIN  
24. 1B-8704 [1] KEY-WOODRUFF  
25. 272-3089 M [1] BOLT (M10X1.5X90-MM)  
26. 3H-8538 [1] PIN  
27. 3S-2713 [1] NUT-FULL (3/8-24-THD)  
28. 4B-6060 [1] SETSCREW-SOCKET (1/4-20X0.375-IN)  
29. 4J-8922 [1] ROD END (3/8-24-THD)  
30. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
31. 6V-0894 [1] SEAL-O-RING  
32. 6V-2313 M [2] BOLT (M5X0.8X30-MM)  
33. 8T-0328 [2] WASHER-HARD (5.5X10X1-MM THK)  
34. 8T-4121 [5] WASHER-HARD (11X21X2.5-MM THK)  
35. 8T-4133 M [1] NUT (M10X1.5-THD)  
36. 8T-4136 M [3] BOLT (M10X1.5X25-MM)  
37. 8T-4182 M [1] BOLT (M10X1.5X45-MM)  
38. 8T-4195 M [2] BOLT (M10X1.5X30-MM)  
39. 8T-4196 M [2] BOLT (M10X1.5X35-MM)  
40. 8T-4226 [1] WASHER-PLATED (10.5X45X3-MM THK)  
41. 8T-4896 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP49881111
 

282-2473: CONTROL GP-CLUTCH

282-2473 CONTROL GP-CLUTCH
S/N JBP1-UP
PART OF 437-0626 CAB AR, 343-7206 GENERAL AR
Type 1
i05513869 SEBP4988
2822473 CONTROL GP-CLUTCH Parts scheme
  For full view, you need register

Parts for your 160K MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1F-4622 [2] BEARING AS-NEEDLE  
2. 5P-9209 [2] BEARING AS-NEEDLE  
3. 7V-0446 [2] CLIP  
4. 9J-8783 B [1] SHIM (0.508-MM THK)  
5. 116-5710 [1] GROMMET  
6. 130-5300 [1] CLIP  
7. 149-2065 [1] SPRING  
8. 161-7062 [1] HOUSING  
9. 161-7063 [1] SHAFT  
10. 162-8218 [1] GASKET  
11. 162-8219 [1] COVER  
12. 169-0921 [1] ROD END (3/8-24 LH-THD)  
13. 362-2789 [1] ROD  
14. 172-4211 [1] SPACER (10.5X22X50.8-MM THK)  
15. 180-4027 [1] CAM  
16. 180-7147 [1] LEVER  
17. 190-3043 [1] BRACKET AS  
18. 206-3599 [1] LEVER  
19. 207-4922 [1] PEDAL-CLUTCH  
20. 266-1467 CY [1] SENSOR GP-POSITION (ROTARY)(CLUTCH CONTROL)  
21. 129-3173 [1] BOLT-12 POINT HEAD (3/8-16X1.25-IN)  
22. 142-0485 M [1] NUT (M10X1.5-THD)  
23. 1B-0676 [1] PIN  
24. 1B-8704 [1] KEY-WOODRUFF  
25. 272-3089 M [1] BOLT (M10X1.5X90-MM)  
26. 3H-8538 [1] PIN  
27. 3S-2713 [1] NUT-FULL (3/8-24-THD)  
28. 4B-6060 [1] SETSCREW-SOCKET (1/4-20X0.375-IN)  
29. 4J-8922 [1] ROD END (3/8-24-THD)  
30. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
32. 6V-2313 M [2] BOLT (M5X0.8X30-MM)  
33. 8T-0328 [2] WASHER-HARD (5.5X10X1-MM THK)  
34. 8T-4121 [5] WASHER-HARD (11X21X2.5-MM THK)  
35. 8T-4133 M [1] NUT (M10X1.5-THD)  
36. 8T-4136 M [3] BOLT (M10X1.5X25-MM)  
37. 8T-4182 M [1] BOLT (M10X1.5X45-MM)  
38. 8T-4195 M [2] BOLT (M10X1.5X30-MM)  
39. 8T-4196 M [2] BOLT (M10X1.5X35-MM)  
40. 8T-4226 [1] WASHER-PLATED (10.5X45X3-MM THK)  
41. 8T-4896 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP49881112
 

512-5908: CONTROL GP-CLUTCH

512-5908 CONTROL GP-CLUTCH
S/N JBP10100-UP
PART OF 516-7917, 533-0966 CAB AR
i06932865 SEBP4988
5125908 CONTROL GP-CLUTCH Parts scheme
  For full view, you need register

Parts for your 160K MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4J-8922 [1] ROD END (3/8-24-THD)  
2. 169-0921 [1] ROD END (3/8-24 LH-THD)  
3. 7V-0446 [2] CLIP  
4. 116-5710 [1] GROMMET  
5. 161-7062 [1] HOUSING  
6. 161-7063 [1] SHAFT  
7. 162-8218 [1] GASKET  
8. 162-8219 [1] COVER  
9. 180-4027 [1] CAM  
10. 180-7147 [1] LEVER  
11. 190-3043 [1] BRACKET AS  
12. 206-3599 [1] LEVER  
13. 266-1467 Y [1] SENSOR GP-POSITION (ROTARY)(CLUTCH)  
14. 362-2789 [1] ROD  
15. 512-5909 [1] PEDAL-CLUTCH  
16. 129-3173 [1] BOLT-12 POINT HEAD (3/8-16X1.25-IN)  
17. 130-5300 [1] CLIP  
18. 142-0485 M [1] NUT (M10X1.5-THD)  
19. 149-2065 [1] SPRING  
20. 172-4211 [1] SPACER (10.5X22X50.8-MM THK)  
21. 1B-0676 [1] PIN  
22. 1B-8704 [1] KEY-WOODRUFF  
23. 1F-4622 [2] BEARING AS-NEEDLE  
24. 272-3089 M [1] BOLT (M10X1.5X90-MM)  
25. 3H-8538 [1] PIN  
26. 3S-2713 [1] NUT-FULL (3/8-24-THD)  
27. 4B-6060 [1] SETSCREW-SOCKET (1/4-20X0.375-IN)  
28. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
29. 5P-9209 [2] BEARING AS-NEEDLE  
30. 6V-2313 M [2] BOLT (M5X0.8X30-MM)  
31. 8T-0328 [2] WASHER-HARD (5.5X10X1-MM THK)  
32. 8T-4121 [5] WASHER-HARD (11X21X2.5-MM THK)  
33. 8T-4133 M [1] NUT (M10X1.5-THD)  
34. 8T-4136 M [3] BOLT (M10X1.5X25-MM)  
35. 8T-4182 M [1] BOLT (M10X1.5X45-MM)  
36. 8T-4195 M [2] BOLT (M10X1.5X30-MM)  
37. 8T-4196 M [2] BOLT (M10X1.5X35-MM)  
38. 8T-4226 [1] WASHER-PLATED (10.5X45X3-MM THK)  
39. 8T-4896 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
40. 9J-8783 B [1] SHIM (0.508-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP49881113
 

453-2908: CONTROL GP-HYDRAULIC LOCKOUT

453-2908 CONTROL GP-HYDRAULIC LOCKOUT
S/N JBP1-10099
FOR USE WITH @@@@@437-0640@@@@@, @@@@@437-0683@@@@@, @@@@@437-0679@@@@@
CANNOT BE USED WITH @@@@@437-0660@@@@@
i05944159 SEBP4988
4532908 CONTROL GP-HYDRAULIC LOCKOUT Parts scheme
  For full view, you need register

Parts for your 160K MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 107-5014 [4] KNOB  
2. 152-5430 [4] BLOCK  
3. 152-5431 [12] COLLAR  
4. 152-5436 [2] PLATE AS  
    (EACH INCLUDES)
  4F-6123 [2] SPRING  
5. 095-1260 BM [12] SETSCREW-SOCKET (M6X1X6-MM)  
6. 9X-2043 M [4] SCREW-TRUSS HEAD (M6X1X14-MM)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP49881114
 

453-2908: CONTROL GP-HYDRAULIC LOCKOUT

453-2908 CONTROL GP-HYDRAULIC LOCKOUT
S/N JBP10100-UP
FOR USE WITH @@@@@437-0640@@@@@, @@@@@437-0683@@@@@, @@@@@437-0679@@@@@
CANNOT BE USED WITH @@@@@437-0660@@@@@
i06933387 SEBP4988
4532908 CONTROL GP-HYDRAULIC LOCKOUT Parts scheme
  For full view, you need register

Parts for your 160K MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 107-5014 [4] KNOB  
2. 152-5430 [4] BLOCK  
3. 152-5431 [12] COLLAR  
4. 512-5914 C [2] PLATE AS  
    (EACH INCLUDES)
  4F-6123 [2] SPRING  
5. 095-1260 BM [12] SETSCREW-SOCKET (M6X1X6-MM)  
6. 9X-2043 M [4] SCREW-TRUSS HEAD (M6X1X14-MM)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP49881115
 

7I-4718: CONTROL GP-STEERING

7I-4718 CONTROL GP-STEERING
S/N JBP1-UP
PART OF 437-0626, 516-7917, 533-0966 CAB AR, 274-7941, 343-7206 GENERAL AR
i01966115 SEBP4988
7I4718 CONTROL GP-STEERING Parts scheme
  For full view, you need register

Parts for your 160K MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 222-3769 CJ [1] PUMP GP-METERING (HMU)  
2. 092-3200 [1] STEERING WHEEL  
3. 144-6695 [1] NUT (13/16-20-THD)  
4. 118-9573 M [4] BOLT-12 POINT HEAD (M10X1.5X35-MM)  
   
    AVAILABLE REPAIR KIT(S):
  257-8471 J [1] KIT-SEAL (HMU)  
    (INCLUDES SEALS & INSTALLATION TOOL)
  C   CHANGE FROM PREVIOUS TYPE
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
 

#SEBP49881116
 

434-6741: COVER AS

434-6741 COVER AS
S/N JBP1-UP
PART OF 458-5978, 458-5988, 461-2844 OPTION AR-CAB
CANNOT BE USED WITH @@@@@437-0660@@@@@
i05871525 SEBP4988
4346741 COVER AS Parts scheme
  For full view, you need register

Parts for your 160K MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 290-8473 [2] PLUG-BUTTON  
 

#SEBP49881117
 

434-6742: COVER AS

434-6742 COVER AS
S/N JBP1-UP
PART OF 461-0560, 462-7244 OPTION AR-ROADING
CANNOT BE USED WITH @@@@@437-0660@@@@@
i05871545 SEBP4988
4346742 COVER AS Parts scheme
  For full view, you need register

Parts for your 160K MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-7803 [2] PLUG-BUTTON  
2. 6V-3928 [2] PLUG-BUTTON  
3. 131-5171 [1] CLIP  
4. 228-6089 [2] PLUG (ROCKER SWITCH)  
5. 6V-0292 [1] PLUG  
6. 9X-2043 M [4] SCREW-TRUSS HEAD (M6X1X14-MM)  
  M   METRIC PART
 

#SEBP49881118
 

437-0691: COVER AS

437-0691 COVER AS
S/N JBP1-10099
FOR USE WITH @@@@@437-0660@@@@@
i05944109 SEBP4988
4370691 COVER AS Parts scheme
  For full view, you need register

Parts for your 160K MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8X-6475 [2] PLATE  
2. 9X-2043 M [4] SCREW-TRUSS HEAD (M6X1X14-MM)  
  M   METRIC PART
 

#SEBP49881119
 

437-0691: COVER AS

437-0691 COVER AS
S/N JBP10100-UP
FOR USE WITH @@@@@437-0660@@@@@
i06932718 SEBP4988
4370691 COVER AS Parts scheme
  For full view, you need register

Parts for your 160K MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 512-9019 C [2] PLATE  
2. 9X-2043 M [4] SCREW-TRUSS HEAD (M6X1X14-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

Information:

Caterpillar Parts SIS Catalog 160K :

CONTROL GP-CLUTCH
282-2473 CONTROL GP-CLUTCH
CONSOLE GP-OPERATOR
519-4910 CONSOLE GP-OPERATOR
CONSOLE GP-OPERATOR
512-5933 CONSOLE GP-OPERATOR
CONSOLE GP-OPERATOR
512-5898 CONSOLE GP-OPERATOR
CONSOLE GP-OPERATOR
437-0627 CONSOLE GP-OPERATOR
CONSOLE GP-OPERATOR
282-2475 CONSOLE GP-OPERATOR
CONSOLE GP-OPERATOR
167-9002 CONSOLE GP-OPERATOR
CONDENSER & MTG GP-REFRIGERANT
376-6729 CONDENSER & MTG GP-REFRIGERANT
CONTROL GP-CLUTCH
282-2473 CONTROL GP-CLUTCH
CONTROL GP-CLUTCH
512-5908 CONTROL GP-CLUTCH
CONTROL GP-HYDRAULIC LOCKOUT
453-2908 CONTROL GP-HYDRAULIC LOCKOUT
CONTROL GP-HYDRAULIC LOCKOUT
453-2908 CONTROL GP-HYDRAULIC LOCKOUT
CONTROL GP-STEERING
7I-4718 CONTROL GP-STEERING
COVER AS
434-6741 COVER AS
COVER AS
434-6742 COVER AS
COVER AS
437-0691 COVER AS

Truck sale:

Caterpillar 160K
 
Caterpillar 160K
- motor graders
CATERPILLAR INTERNATIONAL SERVICES DEL PERU S.A.
Caterpillar 160K, bergbau-motorgrader, Bau-Und Bergbauausrüstung
217.656 
Caterpillar 160K, bergbau-motorgrader, Bau-Und Bergbauausrüstung
- motor graders
TOROMONT CAT
Canada
Caterpillar 160K, Construction
139,838 
Caterpillar 160K, Construction
- motor graders
FINNING CANADA
Canada
 
 
Caterpillar 160K, motor graders, Construction
- motor graders
ZAHID TRACTOR & HEAVY MACHINERY COMPANY
Saudi Arabia
Caterpillar 160K, Construction
 
Caterpillar 160K, Construction
- motor graders
BARLOWORLD MONGOLIA LLC
Mongolia
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.