AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

533-0203 RIPPER AR -TOWING S/N JBP20100-UP PART OF 533-0194 RIPPER AR 160K MOTOR GRADER


WORK TOOLS
RIPPER GP
SCARIFIER GP
GROUND ENGAGING TOOLS (G.E.T.)

MOTOR GRADER 160K MOTOR GRADER JBP
 160K Motor Grader JBP00001-UP (MACHINE) POWERED BY C7 Engine SEBP4988 160K JBP   (2009)

WORK TOOLS

RIPPER GP
MOUNTING GP-RIPPER
289-7597 MOUNTING GP-RIPPER
MOUNTING GP-RIPPER
461-1240 MOUNTING GP-RIPPER
RIPPER AR
285-4183 RIPPER AR
461-1238 RIPPER AR
533-0194 RIPPER AR
533-0203 RIPPER AR
RIPPER GP
290-3518 RIPPER GP
RIPPER GP
552-3877 RIPPER GP
RIPPER GP
8J-7024 RIPPER GP
 

#SEBP49881330
 

533-0203: RIPPER AR

533-0203 RIPPER AR -TOWING
S/N JBP20100-UP
PART OF 533-0194 RIPPER AR
i07426709 SEBP4988
  For full view, you need register

Parts for your 160K MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  113-7754 Y [1] CYLINDER GP-RIPPER (LIFT)  
  333-1805 Y [1] LINES GP-RIPPER  
  461-1240 Y [1] MOUNTING GP-RIPPER  
  8T-4009 Y [1] PLATE & FILM GP  
  552-3877 Y [1] RIPPER GP (TOWING)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP49881331
 

290-3518: RIPPER GP

290-3518 RIPPER GP
S/N JBP1-UP
3-TEETH
PART OF 461-1238 RIPPER AR
i02783081 SEBP4988
2903518 RIPPER GP Parts scheme
  For full view, you need register

Parts for your 160K MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2K-0120 [1] PIN  
2. 2K-0703 [1] BAR  
3. 3B-8489 [3] FITTING-GREASE (1/8-27 PTF)(HYDRAULIC)  
4. 4K-3004 [2] BEARING-TRUNNION SUPPLEMENTARY  
5. 4K-3150 [2] PIN  
6. 8J-1434 Y [3] TOOTH GP-RIPPER (STRAIGHT)  
7. 9J-0096 [2] LINK AS-UPPER  
    (EACH INCLUDES)
  3G-2581 [2] BEARING  
8. 9W-3155 [1] CARRIAGE AS  
  112-3690 [5] HOLDER-BIT  
9. 190-5386 [2] FILM-IDENTIFICATION (ROUND RED REFLECTIVE)  
10. 290-3519 [1] LINK AS-LOWER  
  3G-2579 [4] BEARING  
  5G-8760 [4] BOSS  
11. 2D-0626 [8] SEAL  
12. 8T-4198 M [2] BOLT (M10X1.5X100-MM)  
13. 6V-7687 M [10] LOCKNUT (M12X1.75-THD)  
14. 6V-7744 M [2] LOCKNUT (M10X1.5-THD)  
15. 8T-5041 M [2] BOLT (M12X1.75X120-MM)  
16. 7K-9203 [8] SEAL-LIP TYPE  
17. 8J-7008 [2] PIN  
18. 8T-4192 M [2] BOLT (M12X1.75X25-MM)  
19. 8T-4910 M [7] BOLT (M12X1.75X60-MM)  
20. 8T-4648 M [1] BOLT (M12X1.75X70-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP49881332
 

552-3877: RIPPER GP

552-3877 RIPPER GP -TOWING
S/N JBP20100-UP
PART OF 533-0203 RIPPER AR
i07426712 SEBP4988
5523877 RIPPER GP Parts scheme
  For full view, you need register

Parts for your 160K MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4K-3150 [2] PIN  
2. 2K-0120 [1] PIN  
3. 3B-8489 [3] FITTING-GREASE (1/8-27 PTF)  
4. 2K-0703 [1] BAR  
5. 4K-3004 [2] BEARING-TRUNNION SUPPLEMENTARY  
6. 8J-1434 Y [3] TOOTH GP-RIPPER (STRAIGHT)  
7. 8T-9530 [4] TACK (METAL)  
8. 9J-0096 [2] LINK AS-UPPER  
    (EACH INCLUDES)
8A. 3G-2581 [2] BEARING  
9. 190-5386 [2] FILM-IDENTIFICATION (ROUND RED REFLECTIVE)  
10. 290-3519 [1] LINK AS-LOWER  
10A. 3G-2579 [4] BEARING  
  5G-8760 [4] BOSS  
11. 2D-0626 [8] SEAL  
12. 533-0204 [1] CARRIAGE GP-TOW  
  2C-8746 [1] PIN  
  3B-5325 [1] PIN-COTTER  
  103-5796 [1] PIN-KEEPER  
  7T-1099 [1] LINK  
  9W-3155 [1] CARRIAGE AS  
  112-3690 [5] HOLDER-BIT  
13. 550-6113 [1] PLATE  
14. 6V-7687 M [10] LOCKNUT (M12X1.75-THD)  
15. 6V-7744 M [2] LOCKNUT (M10X1.5-THD)  
16. 7K-9203 [8] SEAL-LIP TYPE  
17. 8J-7008 [2] PIN  
18. 8T-4192 M [2] BOLT (M12X1.75X25-MM)  
19. 8T-4198 M [2] BOLT (M10X1.5X100-MM)  
20. 8T-4648 M [1] BOLT (M12X1.75X70-MM)  
21. 8T-4910 M [7] BOLT (M12X1.75X60-MM)  
22. 8T-5041 M [2] BOLT (M12X1.75X120-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP49881333
 

8J-7024: RIPPER GP

8J-7024 RIPPER GP
S/N JBP1-UP
3-TEETH
PART OF 285-4183 RIPPER AR
i00125371 SEBP4988
8J7024 RIPPER GP Parts scheme
  For full view, you need register

Parts for your 160K MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
2. 2K-0120 [1] PIN  
3. 2K-0703 [1] BAR  
4. 3B-8489 [3] FITTING-GREASE (1/8-27 PTF)(RIPPER CYLINDER BEARING)  
5. 4K-3004 [2] BEARING-TRUNNION SUPPLEMENTARY  
6. 4K-3150 [2] PIN  
7. 190-5386 [2] FILM-IDENTIFICATION (ROUND RED REFLECTIVE)  
8. 8J-1434 Y [3] TOOTH GP-RIPPER (STRAIGHT)  
9. 9J-0096 [2] LINK AS-UPPER  
    (EACH INCLUDES)
9A. 3G-2581 [2] BEARING  
10. 9W-3155 [1] CARRIAGE AS  
11. 187-0953 [1] LINK AS-LOWER  
11A. 3G-2579 [4] BEARING  
12. 1K-6872 [10] LOCKNUT (1/2-13-THD)  
13. 2D-0626 [8] SEAL  
14. 2K-4973 [2] LOCKNUT (3/8-16-THD)  
15. 5P-2228 [2] BOLT (1/2-13X1-IN)  
16. 5P-2424 [8] BOLT (1/2-13X2.25-IN)  
17. 7K-9203 [8] SEAL-LIP TYPE  
18. 7X-0333 [2] BOLT (1/2-13X4.75-IN)  
19. 8J-7008 [2] PIN  
20. 8T-9378 [2] BOLT (3/8-16X4-IN)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP49881334
 

108-1104: SCARIFIER AR

108-1104 SCARIFIER AR -VEE TYPE
S/N JBP1-UP
i00125705 SEBP4988
  For full view, you need register

Parts for your 160K MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  116-0379 Y [1] BRACKET GP-SCARIFIER  
  8W-2913 Y [1] CYLINDER & MTG GP-SCARIFIER  
  8X-6070 Y [1] LINES GP-HYDRAULIC (SCARIFIER)  
  8X-6080 Y [1] SCARIFIER GP (VEE TYPE)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP49881335
 

435-1516: SCARIFIER AR

435-1516 SCARIFIER AR
S/N JBP1-UP
PART OF 460-6434 OPTION AR-HYDRAULIC
FOR USE WITH @@@@@434-8069@@@@@
CANNOT BE USED WITH @@@@@439-9111@@@@@
i05878620 SEBP4988
  For full view, you need register

Parts for your 160K MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  339-7733 Y [1] BRACKET GP-SCARIFIER  
  8W-2913 Y [1] CYLINDER & MTG GP-SCARIFIER  
  338-7507 Y [1] DRAWBAR GP  
  8X-6070 Y [1] LINES GP-HYDRAULIC  
  434-8076 Y [1] LINES GP-HYDRAULIC  
  310-9428 Y [1] SCARIFIER GP (VEE TYPE)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP49881336
 

310-9428: SCARIFIER GP

310-9428 SCARIFIER GP -VEE TYPE
S/N JBP1-UP
11-TEETH
PART OF 435-1516 SCARIFIER AR
i03101762 SEBP4988
3109428 SCARIFIER GP Parts scheme
  For full view, you need register

Parts for your 160K MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7X-0386 [2] BOLT (7/8-9X3.5-IN)  
3. 2G-4332 [1] BLOCK AS-SCARIFIER  
  7D-8825 [11] SPACER  
  7D-8826 [11] SPACER  
4. 6K-3632 [4] LOCKNUT (1-8-THD)  
5. 3B-8489 [4] FITTING-GREASE (1/8-27 PTF)  
6. 7X-0450 [4] NUT-FULL (1-1/8-7-THD)  
7. 4D-6086 [2] KEY  
8. 5B-0577 [2] COLLAR  
9. 5D-8159 [2] PIN AS  
10. 5K-1458 [11] GROMMET  
11. 5K-1459 [11] LOCK PIN  
12. 6B-3260 [1] TOOL  
13. 6F-6992 [4] CAP-BALL SOCKET  
14. 6Y-5230 [11] TOOTH-SCARIFIER  
15. 7D-2196 [2] SLEEVE AS-LINK  
    (EACH INCLUDES)
  7D-2136 [1] SOCKET-BALL  
16. 7F-1327 B [32] SHIM (0.03-IN THK)  
17. 8D-1268 [2] ARM AS-LIFT  
    (EACH INCLUDES)
  7D-8245 [1] STUD-BALL  
18. 7X-0443 [4] BOLT (1-8X5.5-IN)  
19. 7X-0423 [4] BOLT (1-1/8-7X4.5-IN)  
20. 8W-0663 [2] BRACKET AS  
    (EACH INCLUDES)
  3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
  107-8374 [2] BEARING  
21. 8X-6075 [1] BOLSTER AS  
22. 9D-5516 [2] LINK AS-LIFT  
    (EACH INCLUDES)
  7D-2135 [1] SOCKET-BALL  
23. 107-8375 [1] SHAFT AS  
24. 118-7880 [1] DRAWBAR AS  
  2G-7728 [2] COLLAR  
  8W-5597 [1] STUD-BALL  
25. 118-7881 [1] DRAWBAR AS  
  2G-7728 [2] COLLAR  
  8W-5597 [1] STUD-BALL  
26. 195-7218 [11] SHANK  
27. 198-9811 B [16] SPACER (83X145X3-MM THK)  
28. 198-9812 B [3] SPACER (83X145X2-MM THK)  
29. 8T-8924 [8] BOLT (3/4-10X2.5-IN)  
30. 8C-8842 [4] BOLT (3/4-10X4-IN)  
31. 6V-8188 [2] NUT (1/2-13-THD)  
32. 330-6877 [1] SHAFT  
33. 6V-8182 [4] NUT (3/4-10-THD)  
34. 282-0882 [4] WASHER-HARD (33X56X6-MM THK)  
35. 5D-8161 [2] PIN  
36. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
37. 8T-4994 [8] WASHER-HARD (20X36.5X3.5-MM THK)  
38. 8T-5361 [8] WASHER-HARD (28X49X5-MM THK)  
39. 6K-0545 [6] LOCKNUT (7/8-9-THD)  
40. 7X-0390 [4] BOLT (7/8-9X5-IN)  
41. 8C-6913 [4] WASHER-HARD (24X41.5X4-MM THK)  
42. 6C-9149 [8] WASHER (22X50X10-MM THK)  
43. 7X-0328 [2] BOLT (1/2-13X3.5-IN)  
  B   USE AS REQUIRED
 

#SEBP49881337
 

8X-6080: SCARIFIER GP

8X-6080 SCARIFIER GP -VEE TYPE
S/N JBP1-UP
PART OF 108-1104 SCARIFIER AR
i04555447 SEBP4988
8X6080 SCARIFIER GP Parts scheme 8X6080 SCARIFIER GP Parts scheme
  For full view, you need register

Parts for your 160K MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1A-0224 [2] BOLT (7/8-14X3.5-IN)  
2. 1B-4208 [2] NUT-FULL (7/8-14-THD)  
3. 2G-4332 [1] BLOCK AS-SCARIFIER  
  7D-8825 [11] SPACER  
  7D-8826 [11] SPACER  
4. 2H-3746 [4] BOLT (1-14X5-IN)  
5. 2K-7471 [4] LOCKNUT (1-14-THD)  
6. 3B-8489 [4] FITTING-GREASE (1/8-27 PTF)(SCARIFIER)  
7. 3D-4904 [4] LOCKNUT (1-1/8-12-THD)  
8. 4D-6086 [2] KEY  
9. 5B-0577 [2] COLLAR  
10. 5D-8159 [2] PIN AS  
11. 5K-1458 [11] GROMMET  
12. 5K-1459 [11] LOCK PIN  
13. 6B-3260 [1] TOOL  
14. 6F-6992 [4] CAP-BALL SOCKET  
15. 6Y-5230 [11] TOOTH-SCARIFIER  
16. 7D-2196 [2] SLEEVE AS-LINK  
    (EACH INCLUDES)
  7D-2136 [1] SOCKET-BALL  
17. 7F-1327 B [32] SHIM (0.03-IN THK)  
18. 8D-1268 [2] ARM AS-LIFT  
    (EACH INCLUDES)
  7D-8245 [1] STUD-BALL  
19. 8H-4040 [4] BOLT (1-1/8-12X4.5-IN)  
20. 8W-0663 [2] BRACKET AS  
    (EACH INCLUDES)
  3B-8489 [1] FITTING-GREASE (1/8-27 PTF)(SCARIFIER)  
  107-8374 [2] BEARING  
21. 8X-6075 [1] BOLSTER AS  
22. 9D-5516 [2] LINK AS-LIFT  
    (EACH INCLUDES)
  7D-2135 [1] SOCKET-BALL  
23. 107-8375 [1] SHAFT AS  
24. 118-7880 [1] DRAWBAR AS  
  8W-5597 [1] STUD-BALL  
  2G-7728 [2] COLLAR  
25. 118-7881 [1] DRAWBAR AS  
  8W-5597 [1] STUD-BALL  
  2G-7728 [2] COLLAR  
26. 195-7218 [11] SHANK  
27. 198-9811 B [4] SPACER (83X145X3-MM THK)  
28. 198-9812 B [2] SPACER (83X145X2-MM THK)  
29. 1A-8063 [8] BOLT (3/4-10X2.5-IN)  
30. 1D-4612 [4] BOLT (3/4-10X4-IN)  
31. 1F-7958 [2] NUT-FULL (1/2-13-THD)  
32. 330-6877 [1] SHAFT  
33. 2J-3506 [4] NUT-FULL (3/4-10-THD)  
34. 3S-1349 [4] WASHER-HARD (31X52.5X6-MM THK)  
35. 5D-8161 [2] PIN  
36. 5P-8245 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
37. 5P-8248 [8] WASHER-HARD (20X36.5X3.5-MM THK)  
38. 5P-8250 [8] WASHER (28X49X5-MM THK)  
39. 6K-0545 [4] LOCKNUT (7/8-9-THD)  
40. 7X-0390 [4] BOLT (7/8-9X5-IN)  
41. 8C-6913 [4] WASHER-HARD (24X41.5X4-MM THK)  
42. 8X-3663 [8] WASHER (20X45X12-MM THK)  
43. 9X-8875 [2] BOLT (1/2-13X3.5-IN)  
  B   USE AS REQUIRED
 

#SEBP49881338
 

8J-1434: TOOTH GP-RIPPER

8J-1434 TOOTH GP-RIPPER -STRAIGHT
S/N JBP1-UP
PART OF 433-8869 DISTRIBUTION AR, 290-3518, 552-3877, 8J-7024 RIPPER GP
i00125368 SEBP4988
8J1434 TOOTH GP-RIPPER Parts scheme
  For full view, you need register

Parts for your 160K MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-5325 [2] PIN-COTTER  
2. 2K-6413 [1] PIN  
3. 9J-6586 [1] SHANK  
4. 136-8308 [1] PIN  
5. 6Y-0309 [1] TIP-RIPPER (PENETRATION)  
6. 114-0359 [1] RETAINER AS  
 

#SEBP49881339
 

4K-3330: TOOTH GP-SCARIFIER

4K-3330 TOOTH GP-SCARIFIER
S/N JBP1-UP
9 TEETH
PART OF 433-8869 DISTRIBUTION AR
i00125175 SEBP4988
4K3330 TOOTH GP-SCARIFIER Parts scheme
  For full view, you need register

Parts for your 160K MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5K-1459 [9] LOCK PIN  
2. 5K-1458 [9] GROMMET  
3. 195-7218 [9] SHANK  
4. 6Y-5230 [9] TOOTH-SCARIFIER  
  6B-3260 F [1] TOOL  
  F   NOT SHOWN
 

Information:

Caterpillar Parts SIS Catalog 160K :

533-0194 RIPPER AR
461-1238 RIPPER AR
RIPPER AR
285-4183 RIPPER AR
MOUNTING GP-SNOW WING
180-1679 MOUNTING GP-SNOW WING
MOUNTING GP-RIPPER
461-1240 MOUNTING GP-RIPPER
MOUNTING GP-RIPPER
289-7597 MOUNTING GP-RIPPER
LIFT GP-BLADE
436-6278 LIFT GP-BLADE
LIFT GP-BLADE
436-6277 LIFT GP-BLADE
RIPPER GP
290-3518 RIPPER GP
RIPPER GP
552-3877 RIPPER GP
RIPPER GP
8J-7024 RIPPER GP
108-1104 SCARIFIER AR
435-1516 SCARIFIER AR
SCARIFIER GP
310-9428 SCARIFIER GP
SCARIFIER GP
8X-6080 SCARIFIER GP
TOOTH GP-RIPPER
8J-1434 TOOTH GP-RIPPER

Truck sale:

Caterpillar 160K
 
Caterpillar 160K
- motor graders
CATERPILLAR INTERNATIONAL SERVICES DEL PERU S.A.
Caterpillar 160K, bergbau-motorgrader, Bau-Und Bergbauausrüstung
217.656 
Caterpillar 160K, bergbau-motorgrader, Bau-Und Bergbauausrüstung
- motor graders
TOROMONT CAT
Canada
Caterpillar 160K, Construction
139,838 
Caterpillar 160K, Construction
- motor graders
FINNING CANADA
Canada
 
 
Caterpillar 160K, motor graders, Construction
- motor graders
ZAHID TRACTOR & HEAVY MACHINERY COMPANY
Saudi Arabia
Caterpillar 160K, Construction
 
Caterpillar 160K, Construction
- motor graders
BARLOWORLD MONGOLIA LLC
Mongolia
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.