AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

307-4296 ACCESSORY GP-CAB S/N LCP1-UP PART OF 307-1396, 307-4287 ACCESSORY GP-CAB Type 2 AN ATTACHMENT 973D


OPERATOR STATION
CAB GP
AIR CONDITIONER GP
SEAT GP

TRACK LOADER 973D TRACK LOADER LCP
 973D TRACK-TYPE LOADER LCP00001-UP (MACHINE) POWERED BY C9 Engine SEBP4997 973D LCP   (2008)

OPERATOR STATION

CAB GP
ACCESSORY GP-CAB
307-4287 ACCESSORY GP-CAB
ACCESSORY GP-CAB
307-4296 ACCESSORY GP-CAB
ACCESSORY GP-CAB
307-4296 ACCESSORY GP-CAB
ACCESSORY GP-CAB
307-4297 ACCESSORY GP-CAB
ACCESSORY GP-CAB
307-4297 ACCESSORY GP-CAB
ACCESSORY GP-CAB
327-7799 ACCESSORY GP-CAB
 

#SEBP49970650
 

307-4296: ACCESSORY GP-CAB

307-4296 ACCESSORY GP-CAB
S/N LCP1-UP
PART OF 307-1396, 307-4287 ACCESSORY GP-CAB
Type 2
AN ATTACHMENT
i04287009 SEBP4997
3074296 ACCESSORY GP-CAB Parts scheme 3074296 ACCESSORY GP-CAB Parts scheme 3074296 ACCESSORY GP-CAB Parts scheme
  For full view, you need register

Parts for your 973D TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-6875 [1] MIRROR (2-POINT MOUNT)  
2. 7K-1181 [25] STRAP-CABLE  
3. 8M-7758 [2] RIVET-POP  
4. 9R-4872 [2] CLIP  
5. 7X-0578 C [2] WASHER-HARD (10.2X32X2.5-MM THK)  
6. 124-0597 [2] KNOB  
7. 147-5630 [2] RETAINER  
8. 164-9968 [1] PLATE-IDENTIFICATION (SEQUENCE)  
9. 179-4324 M [2] LOCKNUT (M5X0.8-THD)  
10. 252-8230 [4] DOWEL  
11. 252-8231 [2] PLATE AS  
12. 254-8594 [1] COVER  
13. 254-8617 [1] HANDLE  
14. 254-8621 [1] PLATE  
15. 254-8628 [1] COVER  
16. 257-6157 [1] PLATE  
17. 257-6188 [1] SEAL  
18. 257-6215 [2] CHANNEL AS  
19. 257-6228 [1] COVER AS  
20. 257-6229 [1] COVER AS  
21. 334-6684 [1] PLATE AS  
22. 257-6245 [1] GRID  
23. 9X-1046 CM [2] SCREW (M4X0.7X18-MM)  
24. 261-7382 [1] LEVER AS  
25. 263-9431 [1] FLOORPLATE  
26. 268-0960 M [2] NUT (M12X1.75-THD)  
27. 283-1409 [2] PIVOT  
28. 283-1419 [1] SEAL  
29. 283-1420 [1] HANDLE  
30. 283-5546 [1] LEVER AS  
31. 284-9815 M [8] SCREW-TRUSS HEAD (M8X1.25X10-MM)  
32. 284-9829 [2] STUD  
33. 284-9830 [1] PLATE AS  
34. 289-1074 [1] PANEL  
35. 289-1081 [2] CABLE AS  
36. 289-1082 [2] TURNBUCKLE  
38. 289-1107 [1] FILM-IDENTIFICATION (SWITCH PANEL, RH)  
39. 289-1132 [2] SPRING  
40. 289-1133 [1] BRACKET  
41. 294-3144 [2] LATCH AS  
42. 295-5742 [2] STRIKER AS  
43. 303-4027 [1] CHANNEL  
44. 307-4347 [1] BRACKET AS  
45. 307-4348 [1] COVER  
46. 307-4349 [1] COVER  
47. 312-0005 [1] BOX GP-TOOL  
  188-8846 [1] LATCH AS  
  312-0006 [1] TOOL BOX AS  
  312-0009 [1] SEAL  
48. 253-8798 C [2] KNOB  
49. 127-2170 M [13] SCREW-TRUSS HEAD (M8X1.25X20-MM)  
50. 7X-2554 M [8] BOLT (M16X2X70-MM)  
51. 3B-4504 [8] LOCKWASHER  
52. 3E-8020 M [8] SCREW-TRUSS HEAD (M6X1X25-MM)  
53. 5C-2874 M [8] NUT (M5X0.8-THD)  
54. 5C-2890 M [10] NUT (M6X1-THD)  
55. 5C-7261 M [1] NUT (M8X1.25-THD)  
56. 5C-9553 M [2] BOLT (M6X1X16-MM)  
57. 5P-4115 [16] WASHER-HARD (7.2X19X2-MM THK)  
58. 5P-4116 [2] WASHER-HARD (8.8X20.5X2-MM THK)  
59. 7I-2273 M [2] BOLT (M5X0.8X16-MM)  
60. 7X-0620 [10] WASHER-HARD (5.5X13X1.6-MM THK)  
61. 7X-7729 [3] WASHER (11X25X3-MM THK)  
62. 8T-4121 C [4] WASHER-HARD (11X21X2.5-MM THK)  
63. 8T-4122 [8] WASHER-HARD (17X32X3.5-MM THK)  
64. 8T-4136 M [7] BOLT (M10X1.5X25-MM)  
65. 8T-4200 M [3] BOLT (M8X1.25X16-MM)  
66. 8T-4205 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
67. 8T-4224 [6] WASHER-HARD (8.8X16X2-MM THK)  
68. 8Y-6385 [2] SHIELD-STRIKER  
69. 9X-2039 M [4] SCREW-TRUSS HEAD (M10X1.5X35-MM)  
70. 9X-2041 M [8] SCREW-TRUSS HEAD (M10X1.5X20-MM)  
71. 9X-2042 M [2] SCREW-TRUSS HEAD (M6X1X12-MM)  
72. 9X-2044 M [6] SCREW-TRUSS HEAD (M6X1X16-MM)  
73. 9X-6381 [2] WASHER (6.5X12.5X1.6-MM THK)  
74. 9Z-7719 [2] HOUSING  
75. 114-6658 C [2] WASHER (6.5X17X1-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP49970651
 

307-4297: ACCESSORY GP-CAB

307-4297 ACCESSORY GP-CAB
S/N LCP1-UP
PART OF 307-4287 ACCESSORY GP-CAB
Type 1
AN ATTACHMENT
i03485923 SEBP4997
3074297 ACCESSORY GP-CAB Parts scheme
  For full view, you need register

Parts for your 973D TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-5853 [1] BLADE AS-WIPER (450-MM)(REAR)  
2. 127-0506 [2] BUMPER AS  
3. 134-1935 [1] BLADE AS-WIPER (650-MM)(FRONT)  
4. 143-2397 C [4] CAP  
5. 334-6687 C [1] FLOOR MAT  
6. 334-6688 C [1] FLOOR MAT  
7. 257-6269 [1] DUCT-AIR  
8. 263-9432 [1] ANTENNA AS  
9. 268-0959 [1] HANDRAIL  
10. 281-1298 [1] GROMMET  
11. 283-1392 [2] BUMPER  
12. 283-1408 [2] SPACER  
13. 283-1414 [1] SEAL  
14. 283-1415 [1] SEAL  
15. 283-5529 [1] COVER  
16. 294-3141 [1] SEAL  
17. 294-3142 [1] SEAL  
18. 294-3150 [4] CAP  
19. 294-3159 [2] BOOT  
20. 303-4036 [1] SEAL  
21. 5C-7261 M [2] NUT (M8X1.25-THD)  
22. 5P-4116 [6] WASHER-HARD (8.8X20.5X2-MM THK)  
23. 7X-7729 [2] WASHER (11X25X3-MM THK)  
24. 8T-4121 C [6] WASHER-HARD (11X21X2.5-MM THK)  
25. 8T-4133 M [2] NUT (M10X1.5-THD)  
26. 8T-4186 M [1] BOLT (M10X1.5X40-MM)  
27. 8T-4195 M [2] BOLT (M10X1.5X30-MM)  
28. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
29. 8T-7547 M [5] BOLT (M8X1.25X30-MM)  
30. 289-1073 E SEAL (5-CM EACH)  
31. 222-5093 E SEAL (80.5-CM)  
31A. 222-5093 E SEAL (74.5)  
32. 289-1080 E SEAL (145.5-CM EACH)  
32A. 289-1080 E SEAL (141-CM EACH)  
33. 289-1072 E SEAL (56.5-CM)  
33A. 289-1072 E SEAL (9.7-CM EACH)  
33B. 289-1072 E SEAL (14.3-CM EACH)  
33C. 289-1072 E SEAL (32.5-CM)  
33D. 289-1072 E SEAL (19.2-CM EACH)  
33E. 289-1072 E SEAL (26-CM)  
33F. 289-1072 E SEAL (238-CM)  
33G. 289-1072 E SEAL (32.5-CM)  
33H. 289-1072 E SEAL (42-CM)  
33J. 289-1072 E SEAL (40-CM)  
33K. 289-1072 E SEAL (13.5-CM)  
34. 8T-4191 CM [2] BOLT (M10X1.5X16-MM)  
35. 9X-2044 CM [2] SCREW-TRUSS HEAD (M6X1X16-MM)  
36. 9X-7373 C [1] GROMMET  
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP49970652
 

307-4297: ACCESSORY GP-CAB

307-4297 ACCESSORY GP-CAB
S/N LCP1-UP
PART OF 307-4287 ACCESSORY GP-CAB
Type 2
AN ATTACHMENT
i04777244 SEBP4997
3074297 ACCESSORY GP-CAB Parts scheme
  For full view, you need register

Parts for your 973D TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-5853 [1] BLADE AS-WIPER (450-MM)(REAR)  
2. 127-0506 [2] BUMPER AS  
3. 134-1935 [1] BLADE AS-WIPER (650-MM)(FRONT)  
4. 143-2397 C [2] CAP  
5. 334-6687 [1] FLOOR MAT  
6. 334-6688 [1] FLOOR MAT  
7. 257-6269 [1] DUCT-AIR  
8. 450-4792 [1] ANTENNA AS  
9. 357-0116 C [1] HANDRAIL AS  
10. 450-4232 [1] GROMMET  
11. 283-1392 [2] BUMPER  
12. 283-1408 [2] SPACER  
13. 283-1414 [1] SEAL  
14. 283-1415 [1] SEAL  
15. 283-5529 [1] COVER  
16. 294-3141 [1] SEAL  
17. 294-3142 [1] SEAL  
18. 294-3150 [4] CAP  
19. 294-3159 [2] BOOT  
20. 303-4036 [1] SEAL  
21. 5C-7261 M [2] NUT (M8X1.25-THD)  
22. 5P-4116 [6] WASHER-HARD (8.8X20.5X2-MM THK)  
23. 7X-7729 C [4] WASHER (11X25X3-MM THK)  
24. 8T-4121 C [2] WASHER-HARD (11X21X2.5-MM THK)  
25. 8T-4133 M [2] NUT (M10X1.5-THD)  
26. 8T-4186 M [1] BOLT (M10X1.5X40-MM)  
27. 8T-4195 M [2] BOLT (M10X1.5X30-MM)  
28. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
29. 8T-7547 M [5] BOLT (M8X1.25X30-MM)  
30. 289-1073 E SEAL (5-CM EACH)  
31. 222-5093 E SEAL (80.5-CM)  
31A. 222-5093 E SEAL (74.5)  
32. 289-1080 E SEAL (145.5-CM EACH)  
32A. 289-1080 E SEAL (141-CM EACH)  
33. 289-1072 CE SEAL (56.5-CM)  
33A. 289-1072 CE SEAL (9.7-CM EACH)  
33B. 289-1072 CE SEAL (15.2-CM EACH)  
33E. 289-1072 CE SEAL (26-CM)  
33F. 289-1072 CE SEAL (238-CM)  
33J. 289-1072 CE SEAL (40-CM)  
33K. 289-1072 CE SEAL (13.5-CM)  
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP49970653
 

327-7799: ACCESSORY GP-CAB

327-7799 ACCESSORY GP-CAB
S/N LCP1-UP
PART OF 327-7790 CAB GP
i03326981 SEBP4997
3277799 ACCESSORY GP-CAB Parts scheme
  For full view, you need register

Parts for your 973D TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 254-8606 [1] FLOOR MAT  
2. 254-8609 [1] FLOOR MAT  
3. 257-6269 [1] DUCT-AIR  
4. 263-9432 [1] ANTENNA AS  
5. 281-1298 [1] GROMMET  
6. 283-5529 [1] COVER  
7. 294-3141 [1] SEAL  
8. 294-3142 [1] SEAL  
9. 294-3150 [4] CAP  
10. 294-3159 [2] BOOT  
11. 303-4036 [1] SEAL  
12. 5P-4116 [6] WASHER-HARD (8.8X20.5X2-MM THK)  
13. 8T-4186 M [1] BOLT (M10X1.5X40-MM)  
14. 8T-7547 M [5] BOLT (M8X1.25X30-MM)  
15. 222-5093 E SEAL (75-CM)  
15A. 222-5093 E SEAL (81-CM)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP49970654
 

307-4286: AIR CONDITIONER & MOUNTING GP

307-4286 AIR CONDITIONER & MOUNTING GP -CAB
S/N LCP1-UP
PART OF 307-1399, 334-6680 CAB GP
AN ATTACHMENT
i03491164 SEBP4997
3074286 AIR CONDITIONER & MOUNTING GP Parts scheme
  For full view, you need register

Parts for your 973D TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 257-3227 [1] DRYER AS-REFRIGERANT  
2. 266-7765 [1] FILTER ELEMENT-AIR (STANDARD EFFICIENCY)  
3. 267-6281 Y [1] LINES GP-HEATER  
4. 274-5909 [1] ACCUMULATOR-REFRIGERANT  
5. 279-8843 Y [1] AIR CONDITIONER GP  
6. 284-9758 C [1] GUARD AS  
7. 287-0554 Y [1] CONDENSER GP-REFRIGERANT  
8. 294-3138 C [1] GRID  
9. 303-4037 Y [1] LINES GP-AIR CONDITIONER  
10. 303-4040 [2] PLATE  
11. 109-1633 [1] CLIP (SLOT)  
12. 109-1634 [1] CLIP (TAB)  
13. 4P-8134 [2] CLIP (LADDER)  
14. 7X-7729 [10] WASHER (11X25X3-MM THK)  
15. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
16. 8T-4133 M [3] NUT (M10X1.5-THD)  
17. 8T-4139 M [1] BOLT (M12X1.75X30-MM)  
18. 8T-4195 M [6] BOLT (M10X1.5X30-MM)  
19. 8T-4223 [1] WASHER-HARD (13.5X25.5X3-MM THK)  
20. 8T-6726 [2] CLAMP-HOSE  
21. 9X-2039 M [10] SCREW-TRUSS HEAD (M10X1.5X35-MM)  
22. 9X-2040 M [1] SCREW-TRUSS HEAD (M10X1.5X25-MM)  
23. 307-4341 [4] TUBE AS  
24. 7K-1181 [5] STRAP-CABLE  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP49970655
 

327-7797: AIR CONDITIONER & MOUNTING GP

327-7797 AIR CONDITIONER & MOUNTING GP
S/N LCP1-UP
PART OF 327-7790 CAB GP
i03326888 SEBP4997
3277797 AIR CONDITIONER & MOUNTING GP Parts scheme
  For full view, you need register

Parts for your 973D TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7K-1181 [5] STRAP-CABLE  
2. 257-3227 [1] DRYER AS-REFRIGERANT  
3. 267-6281 Y [1] LINES GP-HEATER  
4. 274-5909 [1] ACCUMULATOR-REFRIGERANT  
5. 303-4037 Y [1] LINES GP-AIR CONDITIONER  
6. 307-4341 [4] TUBE AS  
7. 109-1633 [1] CLIP (SLOT)  
8. 109-1634 [1] CLIP (TAB)  
9. 8T-4139 M [1] BOLT (M12X1.75X30-MM)  
10. 8T-4223 [1] WASHER-HARD (13.5X25.5X3-MM THK)  
11. 8T-6726 [2] CLAMP-HOSE  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP49970656
 

279-8843: AIR CONDITIONER GP

279-8843 AIR CONDITIONER GP
S/N LCP1-UP
PART OF 307-4286 AIR CONDITIONER & MOUNTING GP
AN ATTACHMENT
i05751627 SEBP4997
2798843 AIR CONDITIONER GP Parts scheme 2798843 AIR CONDITIONER GP Parts scheme
  For full view, you need register

Parts for your 973D TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 119-9631 C [1] SWITCH-TEMPERATURE  
2. 3S-2093 [3] STRAP-CABLE  
3. 8C-3756 [1] FILM-IDENTIFICATION (AIR CONDITIONER)  
4. 111-4015 [1] GROMMET  
5. 4P-7581 [1] CLIP (LADDER)  
6. 131-3093 [1] BUSHING  
7. 133-8714 [1] GROMMET  
8. 134-3518 C [3] TIE-PUSH MOUNT  
9. 209-8217 [1] FILTER ELEMENT-CAB AIR (STANDARD EFFICIENCY)  
    -OR-
  268-6705 A [1] FILTER ELEMENT AS-AIR (ADVANCED EFFICIENCY)  
    -OR-
  307-4442 A [1] FILTER (ACTIVATED CHARCOAL)  
    -OR-
  318-7190 A [1] FILTER ELEMENT-CAB AIR (HIGH EFFICIENCY)  
10. 248-6772 [2] SCREW-MACHINE (8-16X7.75-IN)  
11. 255-6210 [1] COIL AS-EVAPORATOR  
12. 256-0761 [1] CASE AS-AIR CONDITIONER  
13. 256-0762 [1] PLATE AS  
14. 256-0768 [1] PLATE AS  
  6V-9632 M [6] NUT-WELD (M6X1-THD)  
  9X-2032 M [2] NUT-WELD (M4X0.7-THD)  
15. 256-0770 [1] PLATE AS  
16. 256-6454 [2] SENSOR-TEMPERATURE (2-PIN)(AIR CONDITIONER)  
17. 262-2814 [1] PLATE AS  
18. 262-2815 J [1] GASKET  
19. 262-2816 J [1] GASKET  
20. 275-6707 [2] GROMMET  
21. 277-7112 [1] PLATE  
22. 428-7410 [1] PLATE AS  
23. 277-9958 J [1] GASKET  
24. 277-9959 J [1] GASKET  
25. J [1] GASKET  
26. 277-9962 J [1] GASKET  
27. 437-4215 CJ [1] SEAL  
28. 151-5650 C [2] PLUG  
29. 428-7409 [1] PLATE AS  
30. Y [1] HEATER GP-CAB  
31. 318-0815 [1] PLATE AS  
32. 278-3354 [1] FILM-INSTRUCTION (HVAC WATER, DRAINING, FILLING)  
33. 279-0850 [1] ACTUATOR (ELECTRONIC)  
34. 279-8835 [1] BLOWER AS  
35. 281-0334 [1] HARNESS AS-MOTOR (BLOWER)  
  6T-6505 [7] HOUSING-RECEPTACLE (BLADE, POSITIVE LOCK)  
  230-4010 [1] RECEPTACLE AS-CONNECTOR (12-PIN)  
  177-9653 [1] KIT-RECEPTACLE (4-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  177-9648 [1] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS & WEDGE)
  155-2271 [1] KIT-CONNECTING PLUG (4-PIN)  
    (INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
36. 282-3476 [1] RESISTOR AS  
  280-9453 [3] SCREW-SELF-TAPPING (6X0.375-IN)  
  282-3481 [1] PLATE AS  
37. 282-3653 [1] BRACKET  
38. 116-6952 CM [4] BOLT (M4X0.7X10-MM)  
39. 096-6166 C [6] WASHER-HARD (4.5X9X1-MM THK)  
40. 3B-4501 [2] LOCKWASHER  
41. 5C-9553 CM [19] BOLT (M6X1X16-MM)  
42. 8T-0337 CM [2] SCREW-MACHINE (M4X0.7X12-MM)  
43. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
44. 8T-4137 M [2] BOLT (M10X1.5X20-MM)  
45. 8T-4205 [21] WASHER-HARD (7.2X14.5X2-MM THK)  
46. 6V-2496 D SEAL (0.2-M EACH)  
46A. 6V-2496 D SEAL (0.3-M)  
46B. 6V-2496 D SEAL (0.1-M EACH)  
46C. 6V-2496 D SEAL (0.3-M EACH)  
47. 153-6932 J [1] GASKET  
48. 433-2861 [1] SEAL  
49. 433-2862 [1] SEAL  
50. 214-9035 CM [3] BOLT (M4X0.7X16-MM)  
51. 8T-4171 CM [2] BOLT (M6X1X12-MM)  
52. 5C-8312 CM [2] NUT (M4X0.7-THD)  
   
    AVAILABLE REPAIR KIT(S):
  285-8553 J [1] KIT-GASKET (AIR CONDITIONER)  
  A   NOT PART OF THIS GROUP
  C   CHANGE FROM PREVIOUS TYPE
  D   ORDER BY THE METER
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP49970657
 

289-1075: AIR CONDITIONER GP

289-1075 AIR CONDITIONER GP
S/N LCP1-424
PART OF 273-0752, 306-9908 CAB AR
AN ATTACHMENT
i03556900 SEBP4997
2891075 AIR CONDITIONER GP Parts scheme
  For full view, you need register

Parts for your 973D TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1P-6356 [1] PLATE  
2. 5P-3929 [1] COUPLING AS-REFRIGERANT (SELF-SEALING)  
  8F-9206 [1] SEAL-O-RING  
  107-4397 [1] VALVE AS  
3. 5P-3948 [1] COUPLING AS-REFRIGERANT (SELF-SEALING)  
  7F-8607 [1] SEAL-O-RING  
  107-4399 [1] VALVE AS  
4. 8T-0154 [4] CLAMP-HOSE  
5. 355-3148 [1] SWITCH AS-PRESSURE (HIGH, LOW)(REFRIGERANT, HIGH SIDE)  
  102-8802 [2] KIT-RECEPTACLE (2-PIN)  
    (EACH INCLUDES RECEPTACLE AS & WEDGE)
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  9X-1386 E SLEEVE (25-CM)  
6. 149-6371 [1] SWITCH AS-PRESSURE (A/C COMPRESSOR CLUTCH)(REFRIGERANT, LOW SIDE)  
  102-8802 [2] KIT-RECEPTACLE (2-PIN)  
    (EACH INCLUDES RECEPTACLE AS & WEDGE)
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
7. 219-0942 [1] FITTING AS-AIR CONDITIONER  
  2L-1224 [1] CAP-SEAL (HIGH SIDE)  
  3E-4052 [1] CAP-SEAL (HIGH SIDE CHARGE PORT)  
  3E-4058 [1] VALVE AS (REFRIGERANT, HIGH SIDE)  
  180-7180 [1] CORE-VALVE  
8. 289-1128 [2] PLATE AS  
9. 292-8187 [1] FITTING AS-AIR CONDITIONER  
  3E-4051 [1] CAP-SEAL (LOW SIDE CHARGE PORT)  
  3E-4057 [1] VALVE AS (REFRIGERANT, LOW SIDE)  
  180-7180 [1] CORE-VALVE  
  221-2389 [1] CAP-SEAL  
10. 303-4030 I [1] HOSE AS  
11. 303-4031 I [1] HOSE AS  
12. 303-4032 [1] BRACKET AS  
13. 1P-7009 [2] CLIP  
14. 323-3730 M [2] BOLT (M10X1.5X50-MM)  
15. 4D-7735 [1] CLIP  
16. 6D-1641 [3] CLIP (LOOP)  
17. 7X-7729 [6] WASHER (11X25X3-MM THK)  
18. 8T-4137 M [2] BOLT (M10X1.5X20-MM)  
19. 8T-4186 M [1] BOLT (M10X1.5X40-MM)  
20. 8T-4195 M [1] BOLT (M10X1.5X30-MM)  
21. 8T-6466 M [1] BOLT (M10X1.5X60-MM)  
22. 8T-7934 [1] WASHER-HARD (11X21X5-MM THK)  
23. 9X-7378 [2] SEAL-O-RING  
24. 9X-7381 [1] SEAL-O-RING  
25. 9X-7382 [1] SEAL-O-RING  
26. 9X-7383 [1] SEAL-O-RING  
27. 9X-7384 [1] SEAL-O-RING  
28. 9X-7385 [2] SEAL-O-RING  
29. 9X-8250 [3] CLIP  
30. 5P-0767 E HOSE (207-CM)  
30A. 5P-0767 E HOSE (211-CM)  
31. 198-4777 [2] WASHER-HARD (11X25X10-MM THK)  
32. 198-4766 [1] WASHER-HARD (11X25X10-MM THK)  
33. 177-2215 [1] STRAP-DUAL CLAMP  
  E   ORDER BY THE CENTIMETER
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP49970658
 

289-1075: AIR CONDITIONER GP

289-1075 AIR CONDITIONER GP
S/N LCP425-UP
PART OF 273-0752, 306-9908 CAB AR
AN ATTACHMENT
i06533119 SEBP4997
2891075 AIR CONDITIONER GP Parts scheme
  For full view, you need register

Parts for your 973D TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1P-6356 [1] PLATE  
2. 5P-3929 [1] COUPLING AS-REFRIGERANT (SELF-SEALING)  
3. 5P-3948 [1] COUPLING AS-REFRIGERANT (SELF-SEALING)  
4. 8T-0154 [4] CLAMP-HOSE  
5. 355-3148 [1] SWITCH AS-PRESSURE (HIGH, LOW)(REFRIGERANT, HIGH SIDE)  
  102-8802 [2] KIT-RECEPTACLE (2-PIN)  
    (EACH INCLUDES RECEPTACLE AS & WEDGE)
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
6. 149-6371 [1] SWITCH AS-PRESSURE (A/C COMPRESSOR CLUTCH)(REFRIGERANT, LOW SIDE)  
  102-8802 [2] KIT-RECEPTACLE (2-PIN)  
    (EACH INCLUDES RECEPTACLE AS & WEDGE)
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
7. 219-0942 [1] FITTING AS-AIR CONDITIONER  
  2L-1224 [1] CAP-SEAL (HIGH SIDE)  
  3E-4052 [1] CAP-SEAL (HIGH SIDE CHARGE PORT)  
  3E-4058 [1] VALVE AS (REFRIGERANT, HIGH SIDE)  
  180-7180 [1] CORE-VALVE  
9. 292-8187 [1] FITTING AS-AIR CONDITIONER  
  3E-4051 [1] CAP-SEAL (LOW SIDE CHARGE PORT)  
  3E-4057 [1] VALVE AS (REFRIGERANT, LOW SIDE)  
  180-7180 [1] CORE-VALVE  
  390-3140 [1] CAP-SEAL  
10. 303-4030 I [1] HOSE AS  
11. 303-4031 I [1] HOSE AS  
12. 303-4032 [1] BRACKET AS  
  8T-3490 M [3] NUT-WELD (M10X1.5-THD)  
14. 8T-4136 CM [2] BOLT (M10X1.5X25-MM)  
15. 4D-7735 [1] CLIP  
16. 6D-1641 [3] CLIP (LOOP)  
17. 7X-7729 [6] WASHER (11X25X3-MM THK)  
18. 8T-4137 M [2] BOLT (M10X1.5X20-MM)  
19. 8T-4186 M [1] BOLT (M10X1.5X40-MM)  
20. 8T-4195 M [1] BOLT (M10X1.5X30-MM)  
21. 8T-6466 M [1] BOLT (M10X1.5X60-MM)  
22. 8T-7934 [1] WASHER-HARD (11X21X5-MM THK)  
23. 9X-7378 [2] SEAL-O-RING  
24. 9X-7381 [1] SEAL-O-RING  
25. 9X-7382 [1] SEAL-O-RING  
26. 9X-7383 [1] SEAL-O-RING  
27. 9X-7384 [1] SEAL-O-RING  
28. 9X-7385 [2] SEAL-O-RING  
29. 9X-8250 C [1] CLIP  
30. 5P-0767 CE HOSE (201-CM)  
30A. 5P-0767 CE HOSE (193-CM)  
32. 198-4766 [1] WASHER-HARD (11X25X10-MM THK)  
33. 177-2215 [1] STRAP-DUAL CLAMP  
34. 067-2551 C [2] CLIP  
35. 223-3490 C [2] CLIP  
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP49970659
 

286-8238: ARMREST GP

286-8238 ARMREST GP -LH
S/N LCP1-UP
WITH TILT
PART OF 268-9350 CONTROL GP-DIRECTION & SPEED
AN ATTACHMENT
i02665791 SEBP4997
2868238 ARMREST GP Parts scheme 2868238 ARMREST GP Parts scheme
  For full view, you need register

Parts for your 973D TRACK LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8W-1784 [1] STOP  
2. 282-4082 [2] STUD-BALL  
3. 253-8798 [2] KNOB (ARMREST ADJUSTMENT)  
4. 338-5042 [1] BRACKET (LH)  
5. 268-9637 [1] STRIKER  
6. 268-9649 [1] STRUT  
7. 282-2031 [1] LATCH AS  
8. 282-2035 [1] CUSHION AS (LH)  
9. 282-2037 [1] CUSHION AS  
10. 282-6690 [1] COVER  
11. 282-6692 [1] COVER (LH)  
12. 322-5809 [1] PLATE AS  
13. 282-6702 [1] BRACKET AS (LH)  
14. 355-0694 [1] BRACKET AS  
15. 282-6710 [1] BRACKET AS  
16. 284-7649 [1] BRACKET  
17. 286-0602 [1] BUSHING  
18. 289-2078 Y [1] SUPPORT GP-STEERING CONTROL (LH)  
19. 127-2170 M [7] SCREW-TRUSS HEAD (M8X1.25X20-MM)  
20. 179-7262 M [2] SCREW-FLAT HEAD (M8X1.25X40-MM)  
21. 198-2970 [1] LOCKNUT (3/8-16-THD)  
22. 7X-2546 M [1] BOLT (M10X1.5X180-MM)  
23. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
24. 8T-4178 M [2] BOLT (M10X1.5X90-MM)  
25. 8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
26. 7X-2545 M [1] BOLT (M10X1.5X150-MM)  
27. 9X-2041 M [1] SCREW-TRUSS HEAD (M10X1.5X20-MM)  
28. 9X-2042 M [4] SCREW-TRUSS HEAD (M6X1X12-MM)  
29. 9X-2043 M [2] SCREW-TRUSS HEAD (M6X1X14-MM)  
30. 9X-2044 M [3] SCREW-TRUSS HEAD (M6X1X16-MM)  
31. 9X-2045 M [2] SCREW-TRUSS HEAD (M6X1X20-MM)  
32. 7X-0578 [2] WASHER-HARD (10.2X32X2.5-MM THK)  
33. 9X-2046 M [1] SCREW-TRUSS HEAD (M6X1X35-MM)  
34. 214-1048 [1] SPACER (8.8X16X4-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Operation and Maintenance Manual
Operator Station
973D Track-Type Loader
Cab Air Filter - Clean/Replace
973D Track-Type Loader
Operator Controls
973D Track-Type Loader
Radio - Entertainment If Equipped
Caterpillar Corporate Radio
Special Instruction
Replacing Bonded Windows {7310}
Replacing Bonded Windows {7310}
Specifications
ROPS Mounting
973D Track-Type Loader Machine Systems
Disassembly and Assembly
Cab - Tilt - Partial Tilt
973D Track-Type Loader Machine Systems
Cab - Tilt - Full Tilt
973D Track-Type Loader Machine Systems
Cab - Remove
973D Track-Type Loader Machine Systems
Cab - Install
973D Track-Type Loader Machine Systems
Floor Plates - Remove and Install
973D Track-Type Loader Machine Systems
Cab Tilt Cylinder - Remove and Install
973D Track-Type Loader Machine Systems
Service Magazine
New Support Assemblies and Screen Assembly Are Now Used in the Cab Screen Group for 973D Track-Type Loaders {7165}
2012/12/20
A New Plate To Improve Cab Door Sealing has been Implemented on Certain 953D, 963D, and 973D Track-Type Loaders {7301}
2015/01/29
Improved Cab Window Group is Now Used on Certain Track-Type Loaders Equipped with a Cab Screen Group {7165, 7301, 7310}
2015/09/24
An Improved Bolted Joint Is Now Used On The Rear Cab Mounting Bolts On Certain 953D, 963D, 963K, and 973K Track-Type Loaders {7266, 7301}
An Improved Bolted Joint Is Now Used On The Rear Cab Mounting Bolts On Certain 953D, 963D, 963K, and 973K Track-Type Loaders {7266, 7301}
An Improved Top Plate Protecting Cab Roof Is Available for Certain 973D and 973K Steel Mill Machines {7301}
An Improved Top Plate Protecting Cab Roof Is Available for Certain 973D and 973K Steel Mill Machines {7301}

Caterpillar Parts SIS Catalog 973D :

ACCESSORY GP-CAB
307-4296 ACCESSORY GP-CAB
ACCESSORY GP-CAB
307-4287 ACCESSORY GP-CAB
ACCESSORY GP-CAB
307-2774 ACCESSORY GP-CAB
ACCESSORY GP-CAB
307-2774 ACCESSORY GP-CAB
ACCESSORY GP-CAB
307-1396 ACCESSORY GP-CAB
PIN GP-BUCKET
309-4169 PIN GP-BUCKET
PIN GP-BUCKET
308-7458 PIN GP-BUCKET
421-8533 LOADER AR
ACCESSORY GP-CAB
307-4297 ACCESSORY GP-CAB
ACCESSORY GP-CAB
307-4297 ACCESSORY GP-CAB
ACCESSORY GP-CAB
327-7799 ACCESSORY GP-CAB
AIR CONDITIONER & MOUNTING GP
307-4286 AIR CONDITIONER & MOUNTING GP
AIR CONDITIONER & MOUNTING GP
327-7797 AIR CONDITIONER & MOUNTING GP
AIR CONDITIONER GP
279-8843 AIR CONDITIONER GP
AIR CONDITIONER GP
289-1075 AIR CONDITIONER GP
AIR CONDITIONER GP
289-1075 AIR CONDITIONER GP

Truck sale:

Caterpillar 973D
 
Caterpillar 973D
- track loaders
HOLT CAT
Caterpillar 973D, track loaders, Construction
89,000 
Caterpillar 973D, track loaders, Construction
- track loaders
HOLT CAT
Caterpillar 973D, track loaders, Construction
85,000 
Caterpillar 973D, track loaders, Construction
- track loaders
HOLT CAT
Caterpillar 973D, track loaders, Construction
135,000 
Caterpillar 973D, track loaders, Construction
- track loaders
HOLT CAT
Caterpillar 973D, track loaders, Construction
95,000 
Caterpillar 973D, track loaders, Construction
- track loaders
HOLT CAT
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.