AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

434-6702 VALVE & LINKAGE GP S/N SZL1-10099 RIPPER, PLOW DOZER, DOZER ANGLE PART OF 435-1554 CONTROL AR-HYDRAULIC 140K


HYDRAULIC SYSTEM
VALVE & LINKAGE GP
VALVE GP-BANK

MOTOR GRADER 140K MOTOR GRADER SZL
 140K Motor Grader SZL00001-UP (MACHINE) POWERED BY C7 Engine SEBP5007 140K SZL   (2009)

HYDRAULIC SYSTEM

VALVE & LINKAGE GP
VALVE & LINKAGE GP
434-6596 VALVE & LINKAGE GP
434-6596 VALVE & LINKAGE GP
VALVE & LINKAGE GP
434-6702 VALVE & LINKAGE GP
VALVE & LINKAGE GP
434-6702 VALVE & LINKAGE GP
VALVE & LINKAGE GP
490-1163 VALVE & LINKAGE GP
VALVE & LINKAGE GP
516-4143 VALVE & LINKAGE GP
 

#SEBP50070930
 

434-6702: VALVE & LINKAGE GP

434-6702 VALVE & LINKAGE GP
S/N SZL1-10099
RIPPER, PLOW DOZER, DOZER ANGLE
PART OF 435-1554 CONTROL AR-HYDRAULIC
i05880134 SEBP5007
4346702 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 140K MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3F-9556 [22] LOCKWASHER  
2. 6B-0933 [4] SPACER (10.31X19.05X6.35-MM THK)  
3. 6L-1962 [11] NUT-JAM (3/8-24-THD)  
4. 8D-5632 [1] LEVER (CIRCLE DRIVE)  
4A. 8D-5632 [1] LEVER (BLADE LIFT, RH)  
5. 8D-5633 [1] LEVER (SIDESHIFT)  
5A. 8D-5633 [1] LEVER (WHEEL LEAN)  
6. 8D-5634 [1] LEVER (BLADE LIFT, LH)  
6A. 8D-5634 [1] LEVER (CENTERSHIFT)  
7. 8D-5636 B [10] SHIM (0.254-MM THK)  
8. 8D-5637 B [10] SHIM (0.762-MM THK)  
9. 8D-5640 [13] BEARING  
10. 8D-5641 [11] BEARING  
11. 8W-0456 [2] SHAFT  
12. 8X-4277 [11] ROD AS  
    (EACH INCLUDES)
  6V-8186 [1] NUT-FULL (5/16-24-THD)  
  7H-3641 [1] END-ROD (5/16-24-THD)  
  8L-8598 [1] ROD END  
  146-0705 [1] ROD  
13. 8X-5499 [2] RETAINER  
14. 9M-1853 [6] MOUNTING  
15. 101-2457 [1] LEVER (RIPPER)  
15A. 101-2457 [1] LEVER (ARTICULATION)  
16. 101-2458 [1] LEVER (BLADE TIP)  
16A. 101-2458 [1] LEVER (SCARIFIER)  
17. 103-1597 [1] LEVER (BULLDOZER LIFT, PLOW)  
18. 104-7419 [1] PLATE AS (RH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
19. 104-7429 [2] PLATE  
20. 104-7740 [1] PLATE AS (LH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
21. 137-4515 [2] BUSHING  
22. 137-4516 [1] SHAFT  
23. 164-5608 [2] CONNECTOR AS  
    (EACH INCLUDES)
  8T-1687 [1] CONNECTOR  
  3K-0360 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
25. 244-2589 [1] TUBE AS  
26. 244-2594 [1] TUBE AS  
27. 244-2598 [1] TUBE AS  
28. 250-0550 Y [1] VALVE GP-BANK 5 (LH)  
29. 341-6226 Y [1] VALVE GP-BANK 6 (RH)  
30. 2G-6754 [1] KNOB (BULLDOZER LIFT, PLOW)  
31. 148-8318 [2] CONNECTOR AS  
    (EACH INCLUDES)
  6V-8634 [1] CONNECTOR  
  3K-0360 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
32. 206-5123 [2] TEE AS  
    (EACH INCLUDES)
  206-5122 [1] TEE  
  6V-8397 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
33. 2G-6740 [1] KNOB-RIPPER  
34. 2G-6747 [1] KNOB-BLADE TIP  
35. 2G-6748 [1] KNOB-BLADE LIFT (RH)  
36. 2G-6749 [1] KNOB-SIDESHIFT  
37. 2G-6751 [1] KNOB-CIRCLE DRIVE  
38. 2G-6752 [1] KNOB-ARTICULATION  
39. 2G-6753 [1] KNOB-SCARIFIER  
40. 2G-6755 [1] KNOB-CENTERSHIFT  
41. 2G-6756 [1] KNOB-WHEEL LEAN  
42. 2G-6757 [1] KNOB-BLADE LIFT (LH)  
43. 3J-1907 [4] SEAL-O-RING  
44. 4L-6459 [2] BOLT (3/8-16X2.5-IN)  
45. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
46. 5P-1076 [6] WASHER-HARD (13.5X30X4-MM THK)  
47. 5P-2424 [6] BOLT (1/2-13X2.25-IN)  
48. 6V-8188 [2] NUT (1/2-13-THD)  
49. 6V-8397 [9] SEAL-O-RING  
50. 6V-9836 [2] TEE-SWIVEL  
51. 8F-6437 [6] WASHER (13.5X50.8X4.76-MM THK)  
52. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
53. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
54. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
55. 8T-9041 [4] CONNECTOR  
56. 8T-9043 [22] BOLT (5/16-18X0.875-IN)  
57. 453-6457 I [1] HOSE AS  
58. 6V-9850 [1] ELBOW  
  B   USE AS REQUIRED
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP50070931
 

434-6702: VALVE & LINKAGE GP

434-6702 VALVE & LINKAGE GP
S/N SZL10100-UP
RIPPER, PLOW DOZER, DOZER ANGLE
PART OF 435-1554 CONTROL AR-HYDRAULIC
i06904772 SEBP5007
4346702 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 140K MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3F-9556 [22] LOCKWASHER  
2. 6B-0933 [4] SPACER (10.31X19.05X6.35-MM THK)  
3. 6L-1962 [11] NUT-JAM (3/8-24-THD)  
4. 490-1106 C [1] LEVER (CIRCLE DRIVE)  
4A. 490-1106 C [1] LEVER (BLADE LIFT, RH)  
5. 490-1105 C [1] LEVER (SIDESHIFT)  
5A. 490-1105 C [1] LEVER (WHEEL LEAN)  
6. 490-1104 C [1] LEVER (BLADE LIFT, LH)  
6A. 490-1104 C [1] LEVER (CENTERSHIFT)  
7. 8D-5636 B [10] SHIM (0.254-MM THK)  
8. 8D-5637 B [10] SHIM (0.762-MM THK)  
9. 8D-5640 [13] BEARING  
10. 8D-5641 [11] BEARING  
11. 8W-0456 [2] SHAFT  
12. 490-1110 CY [11] ROD AS-ADJUSTING  
13. 490-1108 C [2] RETAINER  
14. 9M-1853 [6] MOUNTING  
15. 490-1103 C [1] LEVER (RIPPER)  
15A. 490-1103 C [1] LEVER (ARTICULATION)  
16. 490-1107 C [1] LEVER (BLADE TIP)  
16A. 490-1107 C [1] LEVER (SCARIFIER)  
17. 490-1151 C [1] LEVER (BULLDOZER LIFT, PLOW)  
18. 104-7419 [1] PLATE AS (RH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
19. 104-7429 [2] PLATE  
20. 104-7740 [1] PLATE AS (LH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
21. 512-5977 C [2] SPACER  
22. 137-4516 [1] SHAFT  
23. 164-5608 [2] CONNECTOR AS  
    (EACH INCLUDES)
  8T-1687 [1] CONNECTOR  
  3K-0360 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
25. 244-2589 [1] TUBE AS  
26. 244-2594 [1] TUBE AS  
27. 244-2598 [1] TUBE AS  
28. 250-0550 Y [1] VALVE GP-BANK 5 (LH)  
29. 341-6226 Y [1] VALVE GP-BANK 6 (RH)  
30. 2G-6754 [1] KNOB (BULLDOZER LIFT, PLOW)  
31. 148-8318 [2] CONNECTOR AS  
    (EACH INCLUDES)
  6V-8634 [1] CONNECTOR  
  3K-0360 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
32. 206-5123 [2] TEE AS  
    (EACH INCLUDES)
  206-5122 [1] TEE  
  6V-8397 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
33. 2G-6740 [1] KNOB-RIPPER  
34. 2G-6747 [1] KNOB-BLADE TIP  
35. 2G-6748 [1] KNOB-BLADE LIFT (RH)  
36. 2G-6749 [1] KNOB-SIDESHIFT  
37. 2G-6751 [1] KNOB-CIRCLE DRIVE  
38. 2G-6752 [1] KNOB-ARTICULATION  
39. 2G-6753 [1] KNOB-SCARIFIER  
40. 2G-6755 [1] KNOB-CENTERSHIFT  
41. 2G-6756 [1] KNOB-WHEEL LEAN  
42. 2G-6757 [1] KNOB-BLADE LIFT (LH)  
43. 3J-1907 [4] SEAL-O-RING  
44. 4L-6459 [2] BOLT (3/8-16X2.5-IN)  
45. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
46. 5P-1076 [6] WASHER-HARD (13.5X30X4-MM THK)  
47. 5P-2424 [6] BOLT (1/2-13X2.25-IN)  
48. 6V-8188 [2] NUT (1/2-13-THD)  
49. 6V-8397 [9] SEAL-O-RING  
50. 6V-9836 [2] TEE-SWIVEL  
51. 8F-6437 [6] WASHER (13.5X50.8X4.76-MM THK)  
52. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
53. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
54. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
55. 8T-9041 [4] CONNECTOR  
56. 8T-9043 [22] BOLT (5/16-18X0.875-IN)  
57. 453-6457 I [1] HOSE AS  
58. 6V-9850 [1] ELBOW  
59. 112-9164 [3] BOOT  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP50070932
 

490-1163: VALVE & LINKAGE GP

490-1163 VALVE & LINKAGE GP
S/N SZL10100-UP
PART OF 434-6596 VALVE & LINKAGE GP
i07151178 SEBP5007
4901163 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 140K MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2G-6740 [1] KNOB-RIPPER  
2. 2G-6747 [1] KNOB-BLADE TIP  
3. 2G-6748 [1] KNOB-BLADE LIFT  
4. 2G-6749 [1] KNOB-SIDESHIFT  
5. 2G-6751 [1] KNOB-CIRCLE DRIVE  
6. 2G-6752 [1] KNOB-ARTICULATION  
7. 2G-6754 [1] KNOB (BULLDOZER LIFT, PLOW)  
8. 2G-6755 [1] KNOB-CENTERSHIFT  
9. 2G-6756 [1] KNOB-WHEEL LEAN  
10. 2G-6757 [1] KNOB-BLADE LIFT  
11. 2G-7107 [1] KNOB-WING LIFT  
12. 2G-7108 [1] KNOB-WING TILT  
13. 8D-5636 B [2] SHIM (0.254-MM THK)  
14. 8D-5637 B [2] SHIM (0.762-MM THK)  
15. 8D-5640 [15] BEARING  
16. 8W-0456 [4] SHAFT  
17. 112-9164 [5] BOOT  
18. 117-0472 [1] KNOB (DOZER ANGLE, SNOW PLOW)  
19. 490-1103 [2] LEVER  
20. 490-1104 [2] LEVER  
21. 490-1105 [2] LEVER  
22. 490-1106 [2] LEVER  
23. 490-1107 [3] LEVER  
24. 490-1108 [2] RETAINER  
25. 490-1110 Y [13] ROD AS-ADJUSTING  
26. 490-1151 [2] LEVER  
27. 512-5977 [2] SPACER  
28. 137-4516 [1] SHAFT  
29. 3F-9556 [26] LOCKWASHER  
30. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
31. 6L-1962 [13] NUT-JAM (3/8-24-THD)  
32. 7X-0291 [2] BOLT (3/8-16X3.75-IN)  
33. 8D-5641 [13] BEARING  
34. 8T-9043 [26] BOLT (5/16-18X0.875-IN)  
35. 9X-2027 [1] WASHER (11X18X2-MM THK)  
  B   USE AS REQUIRED
  Y   SEPARATE ILLUSTRATION
 

#SEBP50070933
 

516-4143: VALVE & LINKAGE GP

516-4143 VALVE & LINKAGE GP
S/N SZL10100-UP
PART OF 516-4155 CONTROL AR-HYDRAULIC
i06923915 SEBP5007
5164143 VALVE & LINKAGE GP Parts scheme 5164143 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 140K MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2G-6740 [1] KNOB-RIPPER  
2. 2G-6747 [1] KNOB-BLADE TIP  
3. 2G-6748 [1] KNOB-BLADE LIFT  
4. 2G-6749 [1] KNOB-SIDESHIFT  
5. 2G-6751 [1] KNOB-CIRCLE DRIVE  
6. 2G-6752 [1] KNOB-ARTICULATION  
7. 2G-6754 [1] KNOB (BULLDOZER LIFT, PLOW)  
8. 2G-6755 [1] KNOB-CENTERSHIFT  
9. 2G-6756 [1] KNOB-WHEEL LEAN  
10. 2G-6757 [1] KNOB-BLADE LIFT  
11. 2G-7107 [1] KNOB-WING LIFT  
12. 2G-7108 [1] KNOB-WING TILT  
13. 6B-0933 [4] SPACER (10.31X19.05X6.35-MM THK)  
14. 6L-1962 [13] NUT-JAM (3/8-24-THD)  
15. 490-1106 C [2] LEVER  
16. 490-1105 C [2] LEVER  
17. 490-1104 C [2] LEVER  
18. 8D-5636 B [10] SHIM (0.254-MM THK)  
19. 8D-5637 B [10] SHIM (0.762-MM THK)  
20. 8D-5640 [15] BEARING  
21. 8W-0456 [4] SHAFT  
22. 490-1110 CY [13] ROD AS-ADJUSTING  
23. 490-1108 C [2] RETAINER  
24. 9M-1853 [6] MOUNTING  
25. 490-1103 C [2] LEVER  
26. 490-1107 C [3] LEVER  
27. 490-1151 C [2] LEVER  
28. 104-7419 [1] PLATE AS (RH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
29. 104-7429 [2] PLATE  
30. 104-7740 [1] PLATE AS (LH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
31. 117-0472 [1] KNOB (DOZER ANGLE, SNOW PLOW)  
32. 512-5977 C [2] SPACER  
33. 511-0964 Y [1] VALVE GP-BANK 7 (LH)(LH)  
34. 511-0965 Y [1] VALVE GP-BANK 6 (RH)  
35. 137-4516 [1] SHAFT  
36. 3F-9556 [26] LOCKWASHER  
37. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
38. 5P-1076 [6] WASHER-HARD (13.5X30X4-MM THK)  
39. 5P-2424 [6] BOLT (1/2-13X2.25-IN)  
40. 6V-8188 [2] NUT (1/2-13-THD)  
41. 7X-0291 [2] BOLT (3/8-16X3.75-IN)  
42. 8D-5641 [13] BEARING  
43. 8F-6437 [6] WASHER (13.5X50.8X4.76-MM THK)  
44. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
45. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
46. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
47. 8T-9043 [26] BOLT (5/16-18X0.875-IN)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP50070934
 

124-3325: VALVE GP-BANK 4

124-3325 VALVE GP-BANK 4 -RH
S/N SZL1-UP
PART OF 342-2154, 342-2640, 348-7520, 434-6587 VALVE & LINKAGE GP
i03531080 SEBP5007
1243325 VALVE GP-BANK 4 Parts scheme
  For full view, you need register

Parts for your 140K MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7X-2546 M [2] BOLT (M10X1.5X180-MM)  
2. 137-6720 M [1] BOLT (M10X1.5X160-MM)  
3. 102-6238 [1] MANIFOLD  
4. 101-0509 [5] SEAL-INTEGRAL  
5. 6E-3028 Y [1] VALVE GP-CONTROL (ARTICULATION)  
6. 6E-3029 Y [1] VALVE GP-CONTROL (CENTERSHIFT)  
7. 6E-3030 Y [1] VALVE GP-CONTROL (WHEEL LEAN)  
8. 124-2884 Y [1] VALVE GP-CONTROL (BLADE LIFT)  
9. 101-9346 [1] COVER  
10. 8T-4186 M [3] BOLT (M10X1.5X40-MM)  
11. 222-4737 [1] PLUG AS  
  9S-4180 [1] PLUG  
  4J-7533 [1] SEAL-O-RING  
12. 8T-4896 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP50070935
 

124-3327: VALVE GP-BANK 4

124-3327 VALVE GP-BANK 4 -LH
S/N SZL1-UP
PART OF 342-2154 VALVE & LINKAGE GP
i03544740 SEBP5007
1243327 VALVE GP-BANK 4 Parts scheme
  For full view, you need register

Parts for your 140K MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7X-2546 M [2] BOLT (M10X1.5X180-MM)  
2. 137-6720 M [1] BOLT (M10X1.5X160-MM)  
3. 102-8385 [1] MANIFOLD  
4. 101-0509 [5] SEAL-INTEGRAL  
5. 124-2883 Y [1] VALVE GP-CONTROL (BLADE LIFT)  
6. 6E-3036 Y [1] VALVE GP-CONTROL (SIDESHIFT)  
7. 6E-3035 Y [1] VALVE GP-CONTROL (CIRCLE DRIVE)  
8. 6E-3034 Y [1] VALVE GP-CONTROL (BLADE TIP)  
9. 101-9346 [1] COVER  
10. 8T-4186 M [3] BOLT (M10X1.5X40-MM)  
11. 8T-4896 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
12. 222-4737 [1] PLUG AS  
  9S-4180 [1] PLUG  
  4J-7533 [1] SEAL-O-RING  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP50070936
 

250-0544: VALVE GP-BANK 4

250-0544 VALVE GP-BANK 4 -RH
S/N SZL1-UP
PART OF 331-1510, 343-6218 VALVE & LINKAGE GP
i03554840 SEBP5007
2500544 VALVE GP-BANK 4 Parts scheme
  For full view, you need register

Parts for your 140K MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6E-3028 Y [1] VALVE GP-CONTROL (ARTICULATION)  
2. 6E-3029 Y [1] VALVE GP-CONTROL (CENTERSHIFT)  
3. 6E-3030 Y [1] VALVE GP-CONTROL (WHEEL LEAN)  
4. 6E-3031 Y [1] VALVE GP-CONTROL (BLADE LIFT)  
5. 101-0509 [5] SEAL-INTEGRAL  
6. 366-4696 [1] PLUG AS  
  4J-7533 [1] SEAL-O-RING  
  [1] PLUG (5/16-24-THD)  
7. 239-9894 Y [1] MANIFOLD GP-VALVE (RH)  
8. 8T-4896 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
9. 102-6238 [1] MANIFOLD  
10. 8T-6408 M [1] BOLT (M10X1.5X160-MM)  
11. 3K-6113 [3] WASHER-HARD (12X18.5X3-MM THK)  
12. 7X-2546 M [2] BOLT (M10X1.5X180-MM)  
13. 8T-4186 M [3] BOLT (M10X1.5X40-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP50070937
 

6E-3032: VALVE GP-BANK 4

6E-3032 VALVE GP-BANK 4 -RH
S/N SZL10100-UP
PART OF 342-2154, 434-6587 VALVE & LINKAGE GP
i06901022 SEBP5007
6E3032 VALVE GP-BANK 4 Parts scheme
  For full view, you need register

Parts for your 140K MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7X-2546 M [2] BOLT (M10X1.5X180-MM)  
2. 8T-6408 M [1] BOLT (M10X1.5X160-MM)  
3. 102-6238 [1] MANIFOLD  
4. 101-0509 [5] SEAL-INTEGRAL  
5. 6E-3028 Y [1] VALVE GP-CONTROL (ARTICULATION)  
6. 6E-3029 Y [1] VALVE GP-CONTROL (CENTERSHIFT)  
7. 6E-3030 Y [1] VALVE GP-CONTROL (WHEEL LEAN)  
8. 6E-3031 Y [1] VALVE GP-CONTROL (BLADE LIFT)  
9. 101-9346 [1] COVER  
10. 8T-4186 M [3] BOLT (M10X1.5X40-MM)  
11. 8T-4896 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
12. 366-4696 [1] PLUG AS  
  [1] PLUG (5/16-24-THD)  
  4J-7533 [1] SEAL-O-RING  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP50070938
 

6E-3038: VALVE GP-BANK 4

6E-3038 VALVE GP-BANK 4 -LH
S/N SZL10100-UP
PART OF 342-2154 VALVE & LINKAGE GP
i03526684 SEBP5007
6E3038 VALVE GP-BANK 4 Parts scheme
  For full view, you need register

Parts for your 140K MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7X-2546 M [2] BOLT (M10X1.5X180-MM)  
2. 137-6720 M [1] BOLT (M10X1.5X160-MM)  
3. 102-8385 [1] MANIFOLD  
4. 101-0509 [5] SEAL-INTEGRAL  
5. 6E-3037 Y [1] VALVE GP-CONTROL (BLADE LIFT)  
6. 6E-3036 Y [1] VALVE GP-CONTROL (SIDESHIFT)  
7. 6E-3035 Y [1] VALVE GP-CONTROL (CIRCLE DRIVE)  
8. 6E-3034 Y [1] VALVE GP-CONTROL (BLADE TIP)  
9. 101-9346 [1] COVER  
10. 8T-4186 M [3] BOLT (M10X1.5X40-MM)  
11. 4J-7533 [1] SEAL-O-RING  
12. 9S-4180 [1] PLUG  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP50070939
 

104-8645: VALVE GP-BANK 5

104-8645 VALVE GP-BANK 5 -LH
S/N SZL10100-UP
PART OF 434-6587, 434-6595 VALVE & LINKAGE GP
i06901421 SEBP5007
1048645 VALVE GP-BANK 5 Parts scheme
  For full view, you need register

Parts for your 140K MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7X-2546 M [2] BOLT (M10X1.5X180-MM)  
2. 8T-6408 M [1] BOLT (M10X1.5X160-MM)  
3. 102-8385 [1] MANIFOLD  
4. 101-0509 [6] SEAL-INTEGRAL  
5. 6E-3034 Y [1] VALVE GP-CONTROL (BLADE TIP)  
6. 6E-3035 Y [1] VALVE GP-CONTROL (CIRCLE DRIVE)  
7. 6E-3036 Y [1] VALVE GP-CONTROL (SIDESHIFT)  
8. 6E-3037 Y [1] VALVE GP-CONTROL (BLADE LIFT)  
9. 107-0545 Y [1] VALVE GP-CONTROL (RIPPER, LH)(RIPPER)  
10. 101-9346 [1] COVER  
11. 8T-4896 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
12. 8T-4172 M [3] BOLT (M10X1.5X80-MM)  
13. 366-4696 [1] PLUG AS  
  [1] PLUG (5/16-24-THD)  
  4J-7533 [1] SEAL-O-RING  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Caterpillar Parts SIS Catalog 140K :

434-6596 VALVE & LINKAGE GP
VALVE & LINKAGE GP
434-6596 VALVE & LINKAGE GP
VALVE & LINKAGE GP
434-6595 VALVE & LINKAGE GP
VALVE & LINKAGE GP
434-6595 VALVE & LINKAGE GP
434-6587 VALVE & LINKAGE GP
VALVE & LINKAGE GP
434-6587 VALVE & LINKAGE GP
VALVE & LINKAGE GP
348-7520 VALVE & LINKAGE GP
VALVE & LINKAGE GP
343-6218 VALVE & LINKAGE GP
VALVE & LINKAGE GP
434-6702 VALVE & LINKAGE GP
VALVE & LINKAGE GP
490-1163 VALVE & LINKAGE GP
VALVE & LINKAGE GP
516-4143 VALVE & LINKAGE GP
VALVE GP-BANK 4
124-3325 VALVE GP-BANK 4
VALVE GP-BANK 4
124-3327 VALVE GP-BANK 4
VALVE GP-BANK 4
250-0544 VALVE GP-BANK 4
VALVE GP-BANK 4
6E-3032 VALVE GP-BANK 4
VALVE GP-BANK 4
6E-3038 VALVE GP-BANK 4

Truck sale:

Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.