WORK TOOLS
RIPPER GPSCARIFIER GP
WORK TOOLS
RIPPER GP
#SEBP50071280
461-1238: RIPPER AR
For full view, you need register
#SEBP50071281
533-0194: RIPPER AR
533-0194 RIPPER AR -TOWING
S/N SZL20100-UP
S/N SZL20100-UP
For full view, you need register
Parts for your 140K MOTOR GRADER:
CATERPILLAR SIS#SEBP50071282
533-0203: RIPPER AR
For full view, you need register
#SEBP50071283
290-3518: RIPPER GP
For full view, you need register
Parts for your 140K MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2K-0120 | [1] | PIN | |
| 2. | 2K-0703 | [1] | BAR | |
| 3. | 3B-8489 | [3] | FITTING-GREASE (1/8-27 PTF) | |
| 4. | 4K-3004 | [2] | BEARING-TRUNNION SUPPLEMENTARY | |
| 5. | 4K-3150 | [2] | PIN | |
| 6. | 8J-1434 Y | [3] | TOOTH GP-RIPPER (STRAIGHT) | |
| 7. | 9J-0096 | [2] | LINK AS-UPPER | |
| (EACH INCLUDES) | ||||
| 3G-2581 | [2] | BEARING | ||
| 8. | 9W-3155 | [1] | CARRIAGE AS | |
| 112-3690 | [5] | HOLDER-BIT | ||
| 9. | 190-5386 | [2] | FILM-IDENTIFICATION (ROUND RED REFLECTIVE) | |
| 10. | 290-3519 | [1] | LINK AS-LOWER | |
| 3G-2579 | [4] | BEARING | ||
| 5G-8760 | [4] | BOSS | ||
| 11. | 2D-0626 | [8] | SEAL | |
| 12. | 8T-4198 M | [2] | BOLT (M10X1.5X100-MM) | |
| 13. | 6V-7687 M | [10] | LOCKNUT (M12X1.75-THD) | |
| 14. | 6V-7744 M | [2] | LOCKNUT (M10X1.5-THD) | |
| 15. | 8T-5041 M | [2] | BOLT (M12X1.75X120-MM) | |
| 16. | 7K-9203 | [8] | SEAL-LIP TYPE | |
| 17. | 8J-7008 | [2] | PIN | |
| 18. | 8T-4192 M | [2] | BOLT (M12X1.75X25-MM) | |
| 19. | 8T-4910 M | [7] | BOLT (M12X1.75X60-MM) | |
| 20. | 8T-4648 M | [1] | BOLT (M12X1.75X70-MM) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP50071284
299-2511: RIPPER GP
For full view, you need register
Parts for your 140K MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8J-5313 Y | [3] | TOOTH GP-RIPPER | |
| 2. | 113-0994 Y | [2] | LINK GP-UPPER | |
| 3. | 113-0997 Y | [1] | LINK GP-LOWER | |
| 4. | 124-9768 | [1] | CARRIAGE AS | |
| 5G-8760 | [6] | BOSS | ||
| 113-1009 | [5] | HOLDER AS | ||
| 5. | 190-5386 | [2] | FILM-IDENTIFICATION (ROUND RED REFLECTIVE)(RIPPER) | |
| 6. | 109-6776 | [2] | PIN | |
| 7. | 113-0996 | [2] | PIN | |
| 8. | 129-3180 M | [2] | LOCKNUT (M12X1.75-THD) | |
| 9. | 3G-0471 | [1] | PIN | |
| 10. | 7X-2549 M | [2] | BOLT (M12X1.75X100-MM) | |
| 11. | 8T-0389 M | [3] | LOCKNUT (M10X1.5-THD) | |
| 12. | 8T-4198 M | [3] | BOLT (M10X1.5X100-MM) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP50071285
552-3877: RIPPER GP
For full view, you need register
Parts for your 140K MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4K-3150 | [2] | PIN | |
| 2. | 2K-0120 | [1] | PIN | |
| 3. | 3B-8489 | [3] | FITTING-GREASE (1/8-27 PTF) | |
| 4. | 2K-0703 | [1] | BAR | |
| 5. | 4K-3004 | [2] | BEARING-TRUNNION SUPPLEMENTARY | |
| 6. | 8J-1434 Y | [3] | TOOTH GP-RIPPER (STRAIGHT) | |
| 7. | 8T-9530 | [4] | TACK (METAL) | |
| 8. | 9J-0096 | [2] | LINK AS-UPPER | |
| (EACH INCLUDES) | ||||
| 8A. | 3G-2581 | [2] | BEARING | |
| 9. | 190-5386 | [2] | FILM-IDENTIFICATION (ROUND RED REFLECTIVE) | |
| 10. | 290-3519 | [1] | LINK AS-LOWER | |
| 10A. | 3G-2579 | [4] | BEARING | |
| 5G-8760 | [4] | BOSS | ||
| 11. | 2D-0626 | [8] | SEAL | |
| 12. | 533-0204 | [1] | CARRIAGE GP-TOW | |
| 2C-8746 | [1] | PIN | ||
| 3B-5325 | [1] | PIN-COTTER | ||
| 103-5796 | [1] | PIN-KEEPER | ||
| 7T-1099 | [1] | LINK | ||
| 9W-3155 | [1] | CARRIAGE AS | ||
| 112-3690 | [5] | HOLDER-BIT | ||
| 13. | 550-6113 | [1] | PLATE | |
| 14. | 6V-7687 M | [10] | LOCKNUT (M12X1.75-THD) | |
| 15. | 6V-7744 M | [2] | LOCKNUT (M10X1.5-THD) | |
| 16. | 7K-9203 | [8] | SEAL-LIP TYPE | |
| 17. | 8J-7008 | [2] | PIN | |
| 18. | 8T-4192 M | [2] | BOLT (M12X1.75X25-MM) | |
| 19. | 8T-4198 M | [2] | BOLT (M10X1.5X100-MM) | |
| 20. | 8T-4648 M | [1] | BOLT (M12X1.75X70-MM) | |
| 21. | 8T-4910 M | [7] | BOLT (M12X1.75X60-MM) | |
| 22. | 8T-5041 M | [2] | BOLT (M12X1.75X120-MM) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP50071286
340-5009: SCARIFIER AR
340-5009 SCARIFIER AR -VEE TYPE
S/N SZL1-UP
PART OF 339-4972, 339-4975 OPTION AR-WORK TOOL
FOR USE WITH @@@@@394-4974@@@@@
S/N SZL1-UP
PART OF 339-4972, 339-4975 OPTION AR-WORK TOOL
FOR USE WITH @@@@@394-4974@@@@@
For full view, you need register
Parts for your 140K MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 339-7733 Y | [1] | BRACKET GP-SCARIFIER | ||
| 8W-2913 Y | [1] | CYLINDER & MTG GP-SCARIFIER | ||
| 338-7507 Y | [1] | DRAWBAR GP | ||
| 8X-6070 Y | [1] | LINES GP-HYDRAULIC (SCARIFIER) | ||
| 106-4787 Y | [1] | LINES GP-HYDRAULIC (LH) | ||
| 110-2985 Y | [1] | LINES GP-HYDRAULIC (RH) | ||
| 310-9428 Y | [1] | SCARIFIER GP (VEE TYPE) | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP50071287
435-1516: SCARIFIER AR
435-1516 SCARIFIER AR -VEE TYPE
S/N SZL1-UP
PART OF 460-6434 OPTION AR-HYDRAULIC
FOR USE WITH @@@@@434-8069@@@@@
CANNOT BE USED WITH @@@@@439-9111@@@@@
S/N SZL1-UP
PART OF 460-6434 OPTION AR-HYDRAULIC
FOR USE WITH @@@@@434-8069@@@@@
CANNOT BE USED WITH @@@@@439-9111@@@@@
For full view, you need register
Parts for your 140K MOTOR GRADER:
CATERPILLAR SIS#SEBP50071288
435-1518: SCARIFIER AR
For full view, you need register
Parts for your 140K MOTOR GRADER:
CATERPILLAR SIS#SEBP50071289
310-9428: SCARIFIER GP
For full view, you need register
Parts for your 140K MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7X-0386 | [2] | BOLT (7/8-9X3.5-IN) | |
| 3. | 2G-4332 | [1] | BLOCK AS-SCARIFIER | |
| 7D-8825 | [11] | SPACER | ||
| 7D-8826 | [11] | SPACER | ||
| 4. | 6K-3632 | [4] | LOCKNUT (1-8-THD) | |
| 5. | 3B-8489 | [4] | FITTING-GREASE (1/8-27 PTF) | |
| 6. | 7X-0450 | [4] | NUT-FULL (1-1/8-7-THD) | |
| 7. | 4D-6086 | [2] | KEY | |
| 8. | 5B-0577 | [2] | COLLAR | |
| 9. | 5D-8159 | [2] | PIN AS | |
| 10. | 5K-1458 | [11] | GROMMET | |
| 11. | 5K-1459 | [11] | LOCK PIN | |
| 12. | 6B-3260 | [1] | TOOL | |
| 13. | 6F-6992 | [4] | CAP-BALL SOCKET | |
| 14. | 6Y-5230 | [11] | TOOTH-SCARIFIER | |
| 15. | 7D-2196 | [2] | SLEEVE AS-LINK | |
| (EACH INCLUDES) | ||||
| 7D-2136 | [1] | SOCKET-BALL | ||
| 16. | 7F-1327 B | [32] | SHIM (0.03-IN THK) | |
| 17. | 8D-1268 | [2] | ARM AS-LIFT | |
| (EACH INCLUDES) | ||||
| 7D-8245 | [1] | STUD-BALL | ||
| 18. | 7X-0443 | [4] | BOLT (1-8X5.5-IN) | |
| 19. | 7X-0423 | [4] | BOLT (1-1/8-7X4.5-IN) | |
| 20. | 8W-0663 | [2] | BRACKET AS | |
| (EACH INCLUDES) | ||||
| 3B-8489 | [1] | FITTING-GREASE (1/8-27 PTF) | ||
| 107-8374 | [2] | BEARING | ||
| 21. | 8X-6075 | [1] | BOLSTER AS | |
| 22. | 9D-5516 | [2] | LINK AS-LIFT | |
| (EACH INCLUDES) | ||||
| 7D-2135 | [1] | SOCKET-BALL | ||
| 23. | 107-8375 | [1] | SHAFT AS | |
| 24. | 118-7880 | [1] | DRAWBAR AS | |
| 2G-7728 | [2] | COLLAR | ||
| 8W-5597 | [1] | STUD-BALL | ||
| 25. | 118-7881 | [1] | DRAWBAR AS | |
| 2G-7728 | [2] | COLLAR | ||
| 8W-5597 | [1] | STUD-BALL | ||
| 26. | 195-7218 | [11] | SHANK | |
| 27. | 198-9811 B | [16] | SPACER (83X145X3-MM THK) | |
| 28. | 198-9812 B | [3] | SPACER (83X145X2-MM THK) | |
| 29. | 8T-8924 | [8] | BOLT (3/4-10X2.5-IN) | |
| 30. | 8C-8842 | [4] | BOLT (3/4-10X4-IN) | |
| 31. | 6V-8188 | [2] | NUT (1/2-13-THD) | |
| 32. | 330-6877 | [1] | SHAFT | |
| 33. | 6V-8182 | [4] | NUT (3/4-10-THD) | |
| 34. | 282-0882 | [4] | WASHER-HARD (33X56X6-MM THK) | |
| 35. | 5D-8161 | [2] | PIN | |
| 36. | 8T-4223 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 37. | 8T-4994 | [8] | WASHER-HARD (20X36.5X3.5-MM THK) | |
| 38. | 8T-5361 | [8] | WASHER-HARD (28X49X5-MM THK) | |
| 39. | 6K-0545 | [6] | LOCKNUT (7/8-9-THD) | |
| 40. | 7X-0390 | [4] | BOLT (7/8-9X5-IN) | |
| 41. | 8C-6913 | [4] | WASHER-HARD (24X41.5X4-MM THK) | |
| 42. | 6C-9149 | [8] | WASHER (22X50X10-MM THK) | |
| 43. | 7X-0328 | [2] | BOLT (1/2-13X3.5-IN) | |
| B | USE AS REQUIRED | |||
