AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

130-9041 CYLINDER GP-STEERING -LH S/N SZM1-UP 57.15-MM (2.25-IN) BORE X 267-MM (16.51-IN) STROKE PART OF 8W-2290 CYLINDER & MTG GP-STEERING 160K


HYDRAULIC SYSTEM
CYLINDER GP
VALVE GP-CONTROL
DRIVE GP
HYDRAULIC GP
ACCUMULATOR GP

MOTOR GRADER 160K MOTOR GRADER SZM
 160K Motor Grader SZM00001-UP (MACHINE) POWERED BY C7 Engine SEBP5008 160K SZM   (2009)

HYDRAULIC SYSTEM

CYLINDER GP
CYLINDER GP-SCARIFIER
165-2510 CYLINDER GP-SCARIFIER
CYLINDER GP-SIDESHIFT
112-5575 CYLINDER GP-SIDESHIFT
CYLINDER GP-STEERING
130-9041 CYLINDER GP-STEERING
CYLINDER GP-STEERING
130-9042 CYLINDER GP-STEERING
CYLINDER GP-WHEEL LEAN
121-9242 CYLINDER GP-WHEEL LEAN
CYLINDER GP-HYDRAULIC
314-9338 CYLINDER GP-HYDRAULIC
 

#SEBP50080820
 

130-9041: CYLINDER GP-STEERING

130-9041 CYLINDER GP-STEERING -LH
S/N SZM1-UP
57.15-MM (2.25-IN) BORE X 267-MM (16.51-IN) STROKE
PART OF 8W-2290 CYLINDER & MTG GP-STEERING
i03537501 SEBP5008
1309041 CYLINDER GP-STEERING Parts scheme
  For full view, you need register

Parts for your 160K MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9T-2388 [1] PISTON  
2. 130-9044 [1] CYLINDER AS (LH)  
  [1] CAP AS  
  005-8639 [1] BEARING-ALIGNING  
  148-2592 [1] BOSS AS  
  1N-5999 [1] PLUG-O-RING  
  7J-0204 [1] SEAL-O-RING  
3. 154-6579 [1] ROD  
4. 162-6448 [2] PLUG AS  
    (EACH INCLUDES)
  1N-5999 [1] PLUG-O-RING  
  7J-0204 [1] SEAL-O-RING  
5. 167-2186 [1] SEAL AS-BUFFER  
6. 167-2294 [1] SEAL-U-CUP  
7. 378-2695 M [1] BOLT (M20X2.5X70-MM)  
8. 175-7895 [1] SEAL-O-RING  
9. 1U-3998 [1] SEAL AS  
10. 226-8202 [1] SEAL-WIPER  
11. 4J-9225 [1] RING-BACKUP  
12. 7H-2423 [1] RING-WEAR  
13. 8T-3282 [1] WASHER-HARD (22X35X3.5-MM THK)  
14. 9T-3727 [1] HEAD  
   
    AVAILABLE REPAIR KIT(S):
  472-8026 [1] KIT-SEAL (CYLINDER)  
    (INCLUDES SEALS & RINGS)
  246-5916 [1] KIT-SEAL (CYLINDER)  
    (INCLUDES SEALS & RINGS)
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP50080821
 

130-9042: CYLINDER GP-STEERING

130-9042 CYLINDER GP-STEERING -RH
S/N SZM1-UP
57.15-MM (2.25-IN) BORE X 267-MM (16.51-IN) STROKE
PART OF 8W-2290 CYLINDER & MTG GP-STEERING
i03537503 SEBP5008
1309042 CYLINDER GP-STEERING Parts scheme
  For full view, you need register

Parts for your 160K MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9T-2388 [1] PISTON  
2. 130-9045 [1] CYLINDER AS (RH)  
  148-2592 [1] BOSS AS  
  1N-5999 [1] PLUG-O-RING  
  7J-0204 [1] SEAL-O-RING  
  [1] CAP AS  
  005-8639 [1] BEARING-ALIGNING  
3. 154-6579 [1] ROD  
4. 167-2186 [1] SEAL AS-BUFFER  
5. 167-2294 [1] SEAL-U-CUP  
6. 226-8202 [1] SEAL-WIPER  
7. 378-2695 M [1] BOLT (M20X2.5X70-MM)  
8. 175-7895 [1] SEAL-O-RING  
9. 162-6448 [2] PLUG AS  
    (EACH INCLUDES)
  1N-5999 [1] PLUG-O-RING  
  7J-0204 [1] SEAL-O-RING  
10. 1U-3998 [1] SEAL AS  
11. 4J-9225 [1] RING-BACKUP  
12. 7H-2423 [1] RING-WEAR  
13. 8T-3282 [1] WASHER-HARD (22X35X3.5-MM THK)  
14. 9T-3727 [1] HEAD  
   
    AVAILABLE REPAIR KIT(S):
  472-8026 [1] KIT-SEAL (CYLINDER)  
    (INCLUDES SEALS & RINGS)
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP50080822
 

121-9242: CYLINDER GP-WHEEL LEAN

121-9242 CYLINDER GP-WHEEL LEAN
S/N SZM1-UP
88.9-MM (3.5-IN) BORE X 149-MM (5.87-IN) STROKE
PART OF 8W-2737 CYLINDER & MTG GP-WHEEL LEAN
i03523263 SEBP5008
1219242 CYLINDER GP-WHEEL LEAN Parts scheme
  For full view, you need register

Parts for your 160K MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 123-1076 [1] CYLINDER AS  
  2G-8631 [1] BUSHING  
2. 173-9683 M [1] BOLT (M30X3.5X90-MM)  
3. 9X-8399 [1] WASHER (33X56X6-MM THK)  
4. 4T-8054 J [1] SEAL AS  
5. 7J-9885 J [1] RING-WEAR  
6. 9T-9040 [1] PISTON  
7. 175-7898 J [1] SEAL-O-RING  
8. 4J-9224 J [1] RING-BACKUP  
9. 6E-4974 [1] HEAD  
10. 121-9245 [1] ROD AS  
  2G-8631 [1] BUSHING  
11. 308-1845 [1] SEAL-WIPER  
12. 356-8331 J [1] SEAL-U-CUP  
13. 289-2935 [1] SEAL AS-BUFFER  
14. 4T-5613 J [1] RING-WEAR  
   
    AVAILABLE REPAIR KIT(S):
  376-9011 J [1] KIT-HYD CYLINDER SEAL  
    (INCLUDES RINGS & SEALS)
    (FOR USE WITH REHS1392)
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP50080823
 

108-4916: DETENT GP-CONTROL VALVE

108-4916 DETENT GP-CONTROL VALVE -BULLDOZER LIFT, PLOW
S/N SZM1-UP
PART OF 107-0547, 556-7821, 556-7823, 6E-3031, 6E-3037 VALVE GP-CONTROL
i03526903 SEBP5008
1084916 DETENT GP-CONTROL VALVE Parts scheme
  For full view, you need register

Parts for your 160K MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5B-9318 [6] BALL  
 

#SEBP50080824
 

253-4677: DRIVE GP-CIRCLE

253-4677 DRIVE GP-CIRCLE
S/N SZM1-UP
PART OF 343-7206 GENERAL AR
i03522881 SEBP5008
2534677 DRIVE GP-CIRCLE Parts scheme 2534677 DRIVE GP-CIRCLE Parts scheme
  For full view, you need register

Parts for your 160K MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1B-4038 [2] CUP-BEARING  
2. 1B-4046 [2] CONE-BEARING  
3. 2G-0478 [5] PLATE-CLUTCH  
4. 2G-6695 [1] BRACKET  
5. 5K-5288 [1] SEAL GP-DUO-CONE  
  5K-5129 [2] RING-SEALING  
6. 323-8674 [1] GEAR-WORM (36-TEETH)  
7. 6G-5534 [1] COVER AS  
  6G-5537 [1] BEARING  
8. 6G-5538 [1] COVER  
9. 6G-5542 [2] SPACER (119.2X178X9.3-MM THK)  
10. 6G-6122 [1] SPRING-DISC  
11. 6Y-7953 [6] DISC-FRICTION  
12. 7D-8983 B [10] SHIM (0.005-IN THK)  
13. 7D-8984 B [6] SHIM (0.007-IN THK)  
14. 8D-7423 [1] WASHER-SPECIAL (81.03X48.41X1.6MM THK)  
15. 8D-7424 [1] SPACER (48X81X6-MM THK)  
16. 8T-0336 [1] FITTING-PRESSURE RELIEF  
17. 323-8675 [1] WORM-CIRCLE DRIVE  
18. 9D-1491 [1] COUPLING  
19. 105-3196 Y [1] MOTOR GP-GEROTOR (CIRCLE DRIVE)  
20. 253-4678 [1] HOUSING AS-DRIVE  
  2D-8154 [4] STUD-TAPERLOCK (1/2-13X2.36-IN)  
  8D-7426 [1] BUSHING  
  286-2631 M [4] STUD-TAPERLOCK (M20X2.5X85-MM)  
21. 261-8553 [1] PINION-CIRCLE DRIVE  
22. 307-1958 [1] SHAFT-PINION DRIVE  
23. 307-1959 B [6] SHIM (0.13-MM THK)  
24. 307-1960 B [1] SHIM (0.25-MM THK)  
25. 307-1961 [1] PLATE  
26. 307-1962 B [4] SHIM (0.5-MM THK)  
27. 0S-1585 [4] BOLT (1/2-13X1.5-IN)  
28. 1A-1415 [1] NUT (1-7/8-12-THD)  
29. 1B-5174 [1] PLUG-PIPE  
30. 1F-7958 [4] NUT-FULL (1/2-13-THD)  
31. 1H-7339 [1] SEAL-O-RING  
32. 2B-0858 [1] PLUG-PIPE (OIL DRAIN)  
33. 2H-9247 [1] SEAL-O-RING  
34. 4F-9653 [1] SEAL-O-RING  
35. 4H-6996 [1] PIN-SPRING  
36. 5H-4909 [1] SEAL-O-RING  
37. 5K-8454 [3] BOLT (1/2-13X1.12-IN)  
38. 5P-8245 [16] WASHER-HARD (13.5X25.5X3-MM THK)  
39. 5S-7379 [4] BOLT (3/8-16X0.875-IN)  
40. 6G-5539 [1] GASKET  
41. 6G-5548 [1] SPACER (69.5X89X0.8-MM THK)  
42. 6H-1717 [5] BOLT (1/2-13X1.125-IN)  
43. 6V-5686 M [3] BOLT (M16X2X50-MM)  
44. 8D-5054 [3] WASHER-HARD (17X30X3-MM THK)  
45. 8D-7425 [2] WASHER-THRUST (2.81X4.25X0.12-IN THK)  
46. 8T-4896 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP50080825
 

423-9923: DRIVE GP-CIRCLE

423-9923 DRIVE GP-CIRCLE
S/N SZM545-UP
PART OF 343-7206 GENERAL AR, 436-8771 SPECIAL AR
i05326453 SEBP5008
4239923 DRIVE GP-CIRCLE Parts scheme 4239923 DRIVE GP-CIRCLE Parts scheme
  For full view, you need register

Parts for your 160K MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1B-4038 [2] CUP-BEARING  
2. 1B-4046 [2] CONE-BEARING  
3. 2G-0478 [5] PLATE-CLUTCH  
4. 2G-6695 [1] BRACKET  
5. 5K-5288 [1] SEAL GP-DUO-CONE  
5A. 5K-5129 [2] RING-SEALING  
6. 6G-5534 [1] COVER AS  
6A. 6G-5537 [1] BEARING  
7. 6G-5538 [1] COVER  
8. 6G-5542 [2] SPACER (119.2X178X9.3-MM THK)  
9. 6G-6122 B [1] SPRING-DISC  
10. 6Y-7953 [6] DISC-FRICTION  
11. 7D-8983 B [10] SHIM (0.005-IN THK)  
12. 7D-8984 B [6] SHIM (0.007-IN THK)  
13. 457-0799 [1] LOCKNUT  
14. 8D-7424 [1] SPACER (48X81X6-MM THK)  
15. 8T-0336 [1] FITTING-PRESSURE RELIEF  
16. 9D-1491 [1] COUPLING  
17. 105-3196 Y [1] MOTOR GP-GEROTOR (CIRCLE DRIVE)  
18. 253-4678 [1] HOUSING AS-DRIVE  
18A. 8D-7426 [1] BUSHING  
  2D-8154 [4] STUD-TAPERLOCK (1/2-13X2.36-IN)  
  286-2631 M [4] STUD-TAPERLOCK (M20X2.5X85-MM)  
19. 307-1959 B [6] SHIM (0.13-MM THK)  
20. 307-1960 B [1] SHIM (0.25-MM THK)  
21. 307-1961 [1] PLATE  
22. 307-1962 B [4] SHIM (0.5-MM THK)  
23. 323-8674 [1] GEAR-WORM (36-TEETH)  
24. 323-8675 [1] WORM-CIRCLE DRIVE  
25. 458-3867 [1] SHAFT-DRIVE  
26. 458-3868 [1] PINION-CIRCLE DRIVE  
27. 0S-1585 [4] BOLT (1/2-13X1.5-IN)  
28. 1A-1415 [1] NUT (1-7/8-12-THD)  
29. 1B-5174 [1] PLUG-PIPE  
30. 1F-7958 [4] NUT-FULL (1/2-13-THD)  
31. 1H-7339 [1] SEAL-O-RING  
32. 2B-0858 [1] PLUG-PIPE  
33. 2H-3935 [1] SEAL-O-RING  
34. 2B-8293 [1] SEAL-O-RING  
35. 4H-6996 [1] PIN-SPRING  
36. 5H-4909 [1] SEAL-O-RING  
37. 5K-8454 [3] BOLT (1/2-13X1.12-IN)  
38. 5P-8245 [16] WASHER-HARD (13.5X25.5X3-MM THK)  
39. 5S-7379 [4] BOLT (3/8-16X0.875-IN)  
40. 6G-5539 [1] GASKET  
41. 6G-5548 [1] SPACER (69.5X89X0.8-MM THK)  
42. 6H-1717 [5] BOLT (1/2-13X1.125-IN)  
43. 6V-5686 M [3] BOLT (M16X2X50-MM)  
44. 8D-5054 [3] WASHER-HARD (17X30X3-MM THK)  
45. 8D-7425 [2] WASHER-THRUST (2.81X4.25X0.12-IN THK)  
46. 8T-4896 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP50080826
 

435-8186: HYDRAULIC AR

435-8186 HYDRAULIC AR
S/N SZM627-UP
PART OF 435-1524 COMMON AR
i07570178 SEBP5008
  For full view, you need register

Parts for your 160K MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  Y [1] AIR DRYER GP  
  316-8363 Y [1] CONTROL GP-DIFFERENTIAL LOCK  
  284-5771 Y [1] CONTROL GP-PARKING BRAKE  
  347-4616 Y [1] CONTROL GP-SERVICE BRAKE  
  140-8129 Y [1] CYLINDER & MTG GP-ARTICULATION  
  8X-1947 Y [1] CYLINDER & MTG GP-BLADE LIFT  
  8X-1943 Y [1] CYLINDER & MTG GP-BLADE TIP  
    S/N SZM10100-20099
  8X-1944 Y [1] CYLINDER & MTG GP-CENTERSHIFT  
  112-7463 Y [1] CYLINDER & MTG GP-SIDESHIFT  
    S/N SZM10100-20099
  8W-2290 Y [1] CYLINDER & MTG GP-STEERING  
  8W-2737 Y [1] CYLINDER & MTG GP-WHEEL LEAN  
  298-8895 Y [1] GUARD GP-DRIVE SHAFT  
  434-8068 Y [1] LINES GP-AIR TANK  
  293-0648 Y [1] LINES GP-HYDRAULIC (CENTERSHIFT LOCK)  
  516-2826 Y [1] LINES GP-LUBRICATION  
    S/N SZM627-10099
  7I-4610 Y [1] LINES GP-LUBRICATION (ARTICULATION HITCH BEARING)  
    S/N SZM10100-UP
  301-4376 Y [1] LINES GP-STEERING  
  164-8462 Y [1] LOCK GP-CENTERSHIFT  
    S/N SZM627-10099
  214-1983 Y [1] TANK & MTG GP-HYDRAULIC  
  435-8224 Y [1] TANK GP-AIR  
  Y   SEPARATE ILLUSTRATION
 

#SEBP50080827
 

166-3336: LINES GP-ACCUMULATOR

166-3336 LINES GP-ACCUMULATOR -BLADE CUSHION
S/N SZM1-UP
PART OF 285-4154 ACCUMULATOR AR-BLADE CUSHION
i03528960 SEBP5008
1663336 LINES GP-ACCUMULATOR Parts scheme
  For full view, you need register

Parts for your 160K MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9D-0953 [1] SPACER (0.406X0.75X0.88-IN THK)  
2. 108-0706 I [1] HOSE AS  
3. 112-2240 Y [2] MANIFOLD GP-CONTROL (BLADE CUSHION)  
4. 134-0744 I [1] HOSE AS  
5. 134-0746 I [1] HOSE AS  
6. 151-9849 I [1] HOSE AS  
7. 171-6466 [2] UNION AS  
    (EACH INCLUDES)
  5P-9810 [1] UNION  
  3D-2824 [2] SEAL-O-RING  
8. 148-8328 [2] CONNECTOR AS  
    (EACH INCLUDES)
  6V-8633 [1] CONNECTOR  
  3D-2824 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
9. 148-8370 [1] ELBOW AS  
  6V-9851 [1] ELBOW  
  6V-8398 [1] SEAL-O-RING  
10. 148-8444 [2] TEE AS-SWIVEL  
    (EACH INCLUDES)
  6V-9837 [1] TEE-SWIVEL  
  6V-8398 [2] SEAL-O-RING  
11. 6D-4244 [2] CLIP (LOOP)  
12. 7X-0289 [1] BOLT (3/8-16X1.875-IN)  
13. 8T-4896 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  Y   SEPARATE ILLUSTRATION
 

#SEBP50080828
 

434-8074: LINES GP-ACCUMULATOR

434-8074 LINES GP-ACCUMULATOR -BLADE CUSHION
S/N SZM1-20099
PART OF 435-1528, 435-1552 ACCUMULATOR AR-BLADE CUSHION
i05878761 SEBP5008
4348074 LINES GP-ACCUMULATOR Parts scheme
  For full view, you need register

Parts for your 160K MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9D-0953 [1] SPACER (0.406X0.75X0.88-IN THK)  
2. 108-0706 I [1] HOSE AS  
3. 112-2240 Y [2] MANIFOLD GP-CONTROL (BLADE CUSHION)  
4. 509-9534 I [1] HOSE AS  
5. 151-9849 I [1] HOSE AS  
6. 171-6466 [2] UNION AS  
    (EACH INCLUDES)
  3D-2824 [2] SEAL-O-RING  
  5P-9560 [1] UNION  
7. 134-0744 I [1] HOSE AS  
8. 148-8328 [2] CONNECTOR AS  
    (EACH INCLUDES)
  3D-2824 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
  6V-8633 [1] CONNECTOR  
9. 148-8364 [2] ELBOW AS  
    (EACH INCLUDES)
  3K-0360 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
  6V-8625 [1] ELBOW  
10. 148-8370 [1] ELBOW AS  
  6V-8398 [1] SEAL-O-RING  
  6V-9851 [1] ELBOW  
11. 148-8444 [2] TEE AS-SWIVEL  
    (EACH INCLUDES)
  6V-8398 [2] SEAL-O-RING  
  6V-9837 [1] TEE-SWIVEL  
12. 164-5608 [2] CONNECTOR AS  
    (EACH INCLUDES)
  3K-0360 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
  8T-1687 [1] CONNECTOR  
13. 6D-4244 [2] CLIP (LOOP)  
14. 7X-0289 [1] BOLT (3/8-16X1.875-IN)  
15. 8T-4896 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  Y   SEPARATE ILLUSTRATION
 

#SEBP50080829
 

434-8074: LINES GP-ACCUMULATOR

434-8074 LINES GP-ACCUMULATOR -BLADE CUSHION
S/N SZM20100-UP
PART OF 435-1528, 435-1552 ACCUMULATOR AR-BLADE CUSHION
i07570174 SEBP5008
4348074 LINES GP-ACCUMULATOR Parts scheme
  For full view, you need register

Parts for your 160K MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9D-0953 [1] SPACER (0.406X0.75X0.88-IN THK)  
2. 108-0706 I [1] HOSE AS  
3. 112-2240 Y [2] MANIFOLD GP-CONTROL (BLADE CUSHION)  
4. 509-9534 I [1] HOSE AS  
5. 151-9849 I [1] HOSE AS  
6. 171-6466 [2] UNION AS  
    (EACH INCLUDES)
  3D-2824 [2] SEAL-O-RING  
  5P-9560 [1] UNION  
7. 134-0744 I [1] HOSE AS  
8. 148-8328 [2] CONNECTOR AS  
    (EACH INCLUDES)
  3D-2824 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
  6V-8633 [1] CONNECTOR  
9. 148-8364 [2] ELBOW AS  
    (EACH INCLUDES)
  3K-0360 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
  6V-8625 [1] ELBOW  
10. 148-8370 [1] ELBOW AS  
  6V-8398 [1] SEAL-O-RING  
  6V-9851 [1] ELBOW  
11. 148-8444 [2] TEE AS-SWIVEL  
    (EACH INCLUDES)
  6V-8398 [2] SEAL-O-RING  
  6V-9837 [1] TEE-SWIVEL  
12. 8T-4896 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
13. 6D-4244 [2] CLIP (LOOP)  
14. 7X-0289 [1] BOLT (3/8-16X1.875-IN)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  Y   SEPARATE ILLUSTRATION
 

Information:

Caterpillar Parts SIS Catalog 160K :

CYLINDER GP-SIDESHIFT
112-5575 CYLINDER GP-SIDESHIFT
CYLINDER GP-SCARIFIER
165-2510 CYLINDER GP-SCARIFIER
CYLINDER GP-RIPPER
113-7754 CYLINDER GP-RIPPER
CYLINDER GP-LIFT
132-4929 CYLINDER GP-LIFT
CYLINDER GP-HYDRAULIC
516-7749 CYLINDER GP-HYDRAULIC
CYLINDER GP-CENTERSHIFT
6E-1343 CYLINDER GP-CENTERSHIFT
CYLINDER GP-BLADE TIP
131-7191 CYLINDER GP-BLADE TIP
CYLINDER GP-ARTICULATION
137-6792 CYLINDER GP-ARTICULATION
CYLINDER GP-STEERING
130-9042 CYLINDER GP-STEERING
CYLINDER GP-WHEEL LEAN
121-9242 CYLINDER GP-WHEEL LEAN
DETENT GP-CONTROL VALVE
108-4916 DETENT GP-CONTROL VALVE
DRIVE GP-CIRCLE
253-4677 DRIVE GP-CIRCLE
DRIVE GP-CIRCLE
423-9923 DRIVE GP-CIRCLE
435-8186 HYDRAULIC AR
LINES GP-ACCUMULATOR
166-3336 LINES GP-ACCUMULATOR
LINES GP-ACCUMULATOR
434-8074 LINES GP-ACCUMULATOR

Truck sale:

Caterpillar 160K
 
Caterpillar 160K
- motor graders
CATERPILLAR INTERNATIONAL SERVICES DEL PERU S.A.
Caterpillar 160K, bergbau-motorgrader, Bau-Und Bergbauausrüstung
217.656 
Caterpillar 160K, bergbau-motorgrader, Bau-Und Bergbauausrüstung
- motor graders
TOROMONT CAT
Canada
Caterpillar 160K, Construction
139,838 
Caterpillar 160K, Construction
- motor graders
FINNING CANADA
Canada
 
 
Caterpillar 160K, motor graders, Construction
- motor graders
ZAHID TRACTOR & HEAVY MACHINERY COMPANY
Saudi Arabia
Caterpillar 160K, Construction
 
Caterpillar 160K, Construction
- motor graders
BARLOWORLD MONGOLIA LLC
Mongolia
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.