AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

214-1983 TANK & MTG GP-HYDRAULIC S/N SZM1-UP PART OF 343-7206 GENERAL AR, 435-8186 HYDRAULIC AR 160K


HYDRAULIC SYSTEM
TANK GP
VALVE & LINKAGE GP

MOTOR GRADER 160K MOTOR GRADER SZM
 160K Motor Grader SZM00001-UP (MACHINE) POWERED BY C7 Engine SEBP5008 160K SZM   (2009)

HYDRAULIC SYSTEM

TANK GP
TANK & FILTER GP-HYDRAULIC
214-1984 TANK & FILTER GP-HYDRAULIC
TANK & MTG GP-HYDRAULIC
214-1983 TANK & MTG GP-HYDRAULIC
 

#SEBP50080890
 

214-1983: TANK & MTG GP-HYDRAULIC

214-1983 TANK & MTG GP-HYDRAULIC
S/N SZM1-UP
PART OF 343-7206 GENERAL AR, 435-8186 HYDRAULIC AR
i03522297 SEBP5008
2141983 TANK & MTG GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 160K MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 246-2641 [1] PADLOCK GP  
  5P-8500 [1] KEY  
2. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
3. 214-1984 Y [1] TANK & FILTER GP-HYDRAULIC  
4. 7X-0325 [4] BOLT (1/2-13X2.5-IN)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP50080891
 

115-0812: VALVE & LINKAGE GP

115-0812 VALVE & LINKAGE GP
S/N SZM1-UP
PART OF 331-1501 CONTROL AR-HYDRAULIC
i06870046 SEBP5008
1150812 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 160K MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8X-5499 [2] RETAINER  
2. 101-2457 [2] LEVER (ARTICULATION)  
3. 8D-5634 [2] LEVER (CENTER SHIFT)  
4. 4L-6459 [1] BOLT (3/8-16X2.5-IN)  
5. 8W-0456 [1] SHAFT  
6. 6V-8186 [20] NUT-FULL (5/16-24-THD)  
  7H-3641 [20] END-ROD (5/16-24-THD)  
  8X-4276 [10] ROD  
7. 8D-5633 [2] LEVER (WHEEL LEAN)  
8. 101-2458 [2] LEVER (BLADE TIP)  
9. 137-4515 [2] BUSHING  
10. 8D-5640 [12] BEARING  
11. 8D-5636 B [4] SHIM (0.254-MM THK)  
12. 8D-5637 B [4] SHIM (0.762-MM THK)  
13. 6L-1962 [10] NUT-JAM (3/8-24-THD)  
14. 8T-9043 [20] BOLT (5/16-18X0.875-IN)  
15. 3F-9556 [20] LOCKWASHER  
16. 9B-7237 [1] BOLT (3/8-16X1.25-IN)  
17. 8D-5641 [10] BEARING  
18. 2G-6757 [1] KNOB-BLADE LIFT  
19. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
20. 2G-6749 [1] KNOB-SIDESHIFT  
21. 2G-6747 [1] KNOB-BLADE TIP  
22. 8D-5632 [2] LEVER (CIRCLE DRIVE)  
23. 2G-6751 [1] KNOB-CIRCLE DRIVE  
24. 2G-6748 [1] KNOB-BLADE LIFT  
25. 2G-6756 [1] KNOB-WHEEL LEAN  
26. 2G-6752 [1] KNOB-ARTICULATION  
27. 2G-6755 [1] KNOB-CENTERSHIFT  
28. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
29. 9M-1853 [6] MOUNTING  
30. 5P-1076 [6] WASHER-HARD (13.5X30X4-MM THK)  
31. 104-7740 [1] PLATE AS (LH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
32. 104-7419 [1] PLATE AS (RH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
33. 104-7429 [2] PLATE  
34. 137-4516 [1] SHAFT  
35. 2G-6740 [1] KNOB-RIPPER  
36. 2G-6754 [1] KNOB (BULLDOZER LIFT, PLOW)  
37. 6V-8188 [2] NUT (1/2-13-THD)  
38. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
39. 8F-6437 [6] WASHER (13.5X50.8X4.76-MM THK)  
40. 5P-2424 [6] BOLT (1/2-13X2.25-IN)  
41. 6B-0933 [4] SPACER (10.31X19.05X6.35-MM THK)  
42. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
43. 124-3326 Y [1] VALVE GP-BANK 5 (RH)  
44. 124-3329 Y [1] VALVE GP-BANK 5 (LH)(LH)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP50080892
 

138-7599: VALVE & LINKAGE GP

138-7599 VALVE & LINKAGE GP -5-BANK, RH, LH
S/N SZM1-UP
PART OF 331-1499 CONTROL AR-HYDRAULIC
i06869602 SEBP5008
1387599 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 160K MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8X-5499 [2] RETAINER  
2. 101-2457 [1] LEVER (RIPPER)  
2A. 101-2457 [1] LEVER (ARTICULATION)  
3. 8D-5634 [1] LEVER (BLADE LIFT, LH)  
3A. 8D-5634 [1] LEVER (CENTER SHIFT)  
4. 4L-6459 [1] BOLT (3/8-16X2.5-IN)  
5. 8W-0456 [1] SHAFT  
6. 8X-4277 [10] ROD AS  
    (EACH INCLUDES)
  6V-8186 [1] NUT-FULL (5/16-24-THD)  
  7H-3641 [1] END-ROD (5/16-24-THD)  
  8L-8598 [1] ROD END  
  146-0705 [1] ROD  
7. 8D-5633 [1] LEVER (SIDE SHIFT)  
7A. 8D-5633 [1] LEVER (WHEEL LEAN)  
8. 101-2458 [1] LEVER (BLADE TIP)  
8A. 101-2458 [1] LEVER (SCARIFIER)  
9. 137-4515 [2] BUSHING  
10. 8D-5640 [12] BEARING  
11. 8D-5636 B [4] SHIM (0.254-MM THK)  
12. 8D-5637 B [4] SHIM (0.762-MM THK)  
13. 6L-1962 [10] NUT-JAM (3/8-24-THD)  
14. 8T-9043 [20] BOLT (5/16-18X0.875-IN)  
15. 3F-9556 [20] LOCKWASHER  
16. 9B-7237 [1] BOLT (3/8-16X1.25-IN)  
17. 8D-5641 [10] BEARING  
18. 2G-6757 [1] KNOB-BLADE LIFT  
19. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
20. 2G-6749 [1] KNOB-SIDESHIFT  
21. 2G-6747 [1] KNOB-BLADE TIP  
22. 8D-5632 [1] LEVER (CIRCLE DRIVE)  
22A. 8D-5632 [1] LEVER (BLADE LIFT, RH)  
23. 2G-6751 [1] KNOB-CIRCLE DRIVE  
24. 2G-6748 [1] KNOB-BLADE LIFT  
25. 2G-6756 [1] KNOB-WHEEL LEAN  
26. 2G-6752 [1] KNOB-ARTICULATION  
27. 2G-6755 [1] KNOB-CENTERSHIFT  
28. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
29. 9M-1853 [6] MOUNTING  
30. 5P-1076 [6] WASHER-HARD (13.5X30X4-MM THK)  
31. 104-7740 [1] PLATE AS (LH)  
32. 104-7419 [1] PLATE AS (RH)  
    (EACH PLATE AS INCLUDES)
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
33. 104-7429 [2] PLATE  
34. 137-4516 [1] SHAFT  
35. 2G-6740 [1] KNOB-RIPPER  
36. 2G-6753 [1] KNOB-SCARIFIER  
37. 6V-8188 [2] NUT (1/2-13-THD)  
38. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
39. 8F-6437 [6] WASHER (13.5X50.8X4.76-MM THK)  
40. 5P-2424 [6] BOLT (1/2-13X2.25-IN)  
41. 6B-0933 [4] SPACER (10.31X19.05X6.35-MM THK)  
42. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
44. 124-3329 Y [1] VALVE GP-BANK 5 (LH)(LH)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP50080893
 

331-1510: VALVE & LINKAGE GP

331-1510 VALVE & LINKAGE GP
S/N SZM1-UP
PART OF 335-1875 CONTROL AR-HYDRAULIC
i03615090 SEBP5008
3311510 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 160K MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3F-9556 [18] LOCKWASHER  
2. 6B-0933 [4] SPACER (10.31X19.05X6.35-MM THK)  
3. 6L-1962 [9] NUT-JAM (3/8-24-THD)  
4. 8D-5632 [1] LEVER (CIRCLE DRIVE)  
4A. 8D-5632 [1] LEVER (BLADE LIFT, RH)  
5. 8D-5633 [1] LEVER (SIDESHIFT)  
5A. 8D-5633 [1] LEVER (WHEEL LEAN)  
6. 8D-5634 [1] LEVER (BLADE LIFT, LH)  
6A. 8D-5634 [1] LEVER (CENTERSHIFT)  
7. 8D-5636 B [4] SHIM (0.254-MM THK)  
8. 8D-5637 B [4] SHIM (0.762-MM THK)  
9. 8D-5640 [11] BEARING  
10. 8D-5641 [9] BEARING  
11. 8X-4277 [9] ROD AS  
    (EACH INCLUDES)
  6V-8186 [1] NUT-FULL (5/16-24-THD)  
  7H-3641 [1] END-ROD (5/16-24-THD)  
  8L-8598 [1] ROD END  
  146-0705 [1] ROD  
12. 8X-5499 [2] RETAINER  
13. 9M-1853 [6] MOUNTING  
14. 101-2457 [1] LEVER (RIPPER)  
14A. 101-2457 [1] LEVER (ARTICULATION)  
15. 101-2458 [1] LEVER (BLADE TIP)  
16. 104-7419 [1] PLATE AS (RH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
17. 104-7429 [2] PLATE  
18. 104-7740 [1] PLATE AS (LH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
19. 137-4515 [2] BUSHING  
20. 137-4516 [1] SHAFT  
21. 164-5608 [2] CONNECTOR AS  
    (EACH INCLUDES)
  8T-1687 [1] CONNECTOR  
  3K-0360 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
22. 244-2585 [1] TUBE AS  
23. 244-2589 [1] TUBE AS  
24. 244-2592 [1] TUBE AS  
25. 244-2596 [1] TUBE AS  
26. 250-0544 Y [1] VALVE GP-BANK 4 (RH)  
27. 250-0550 Y [1] VALVE GP-BANK 5 (LH)  
28. 148-8318 [2] CONNECTOR AS  
    (EACH INCLUDES)
  6V-8634 [1] CONNECTOR  
  3K-0360 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
29. 153-1818 [1] ELBOW  
30. 206-5123 [2] TEE AS  
    (EACH INCLUDES)
  6V-8397 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
31. 2G-6740 [1] KNOB-RIPPER  
32. 2G-6747 [1] KNOB-BLADE TIP  
33. 2G-6748 [1] KNOB-BLADE LIFT (RH)  
34. 2G-6749 [1] KNOB-SIDESHIFT  
35. 2G-6751 [1] KNOB-CIRCLE DRIVE  
36. 2G-6752 [1] KNOB-ARTICULATION  
37. 2G-6755 [1] KNOB-CENTERSHIFT  
38. 2G-6756 [1] KNOB-WHEEL LEAN  
39. 2G-6757 [1] KNOB-BLADE LIFT (LH)  
40. 3J-1907 [4] SEAL-O-RING  
41. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
42. 5P-1076 [6] WASHER-HARD (13.5X30X4-MM THK)  
43. 5P-2424 [6] BOLT (1/2-13X2.25-IN)  
44. 6V-8188 [2] NUT (1/2-13-THD)  
45. 6V-8397 [8] SEAL-O-RING  
46. 6V-9836 [2] TEE-SWIVEL  
47. 8F-6437 [6] WASHER (13.5X50.8X4.76-MM THK)  
48. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
49. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
50. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
51. 8T-9041 [3] CONNECTOR  
52. 8T-9043 [18] BOLT (5/16-18X0.875-IN)  
53. 9B-7237 [2] BOLT (3/8-16X1.25-IN)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP50080894
 

341-6674: VALVE & LINKAGE GP

341-6674 VALVE & LINKAGE GP -6-BANK, RH; 7-BANK, LH
S/N SZM1-UP
PLOW, RIPPER, SNOW WING, SNOW WING TILT W/ FLOWRATE OF 21-L/MIN
PART OF 355-6243 CONTROL AR-HYDRAULIC
i03580460 SEBP5008
3416674 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 160K MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 341-6224 Y [1] VALVE GP-BANK 6 (RH)  
2. 341-6222 Y [1] VALVE GP-BANK 7 (LH)  
3. 8X-5499 [2] RETAINER  
4. 101-2457 [1] LEVER (ARTICULATION)  
4A. 101-2457 [1] LEVER (RIPPER)  
5. 8D-5634 [1] LEVER (CENTERSHIFT)  
5A. 8D-5634 [1] LEVER (BLADE LIFT, LH)  
6. 2G-7107 [1] KNOB-WING LIFT  
7. 8X-4277 [13] ROD AS  
    (EACH INCLUDES)
  6V-8186 [1] NUT-FULL (5/16-24-THD)  
  7H-3641 [1] END-ROD (5/16-24-THD)  
  8L-8598 [1] ROD END  
  146-0705 [1] ROD  
8. 8D-5633 [1] LEVER (WHEEL LEAN)  
8A. 8D-5633 [1] LEVER (SIDESHIFT)  
9. 101-2458 [1] LEVER (BULLDOZER, PLOW)  
9A. 101-2458 [1] LEVER (BLADE TIP)  
9B. 101-2458 [1] LEVER (WING LIFT)  
10. 137-4515 [2] BUSHING  
11. 8D-5640 [15] BEARING  
12. 8D-5636 B [10] SHIM (0.254-MM THK)  
13. 8D-5637 B [10] SHIM (0.762-MM THK)  
14. 6L-1962 [13] NUT-JAM (3/8-24-THD)  
15. 8T-9043 [26] BOLT (5/16-18X0.875-IN)  
16. 3F-9556 [26] LOCKWASHER  
17. 8D-5641 [13] BEARING  
18. 2G-6757 [1] KNOB-BLADE LIFT (LH)  
19. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
20. 2G-6749 [1] KNOB-SIDESHIFT  
21. 2G-6747 [1] KNOB-BLADE TIP  
22. 8D-5632 [1] LEVER (BLADE LIFT, RH)  
22A. 8D-5632 [1] LEVER (CIRCLE DRIVE)  
23. 2G-6751 [1] KNOB-CIRCLE DRIVE  
24. 2G-6748 [1] KNOB-BLADE LIFT (RH)  
25. 2G-6756 [1] KNOB-WHEEL LEAN  
26. 2G-6752 [1] KNOB-ARTICULATION  
27. 2G-6755 [1] KNOB-CENTERSHIFT  
28. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
29. 9M-1853 [6] MOUNTING  
30. 5P-1076 [6] WASHER-HARD (13.5X30X4-MM THK)  
31. 104-7740 [1] PLATE AS (LH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
32. 104-7419 [1] PLATE AS (RH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
33. 117-0472 [1] KNOB (DOZER ANGLE, SNOW PLOW)  
34. 104-7429 [2] PLATE  
35. 137-4516 [1] SHAFT  
36. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
37. 6B-0933 [4] SPACER (10.31X19.05X6.35-MM THK)  
38. 5P-2424 [6] BOLT (1/2-13X2.25-IN)  
39. 6V-8188 [2] NUT (1/2-13-THD)  
40. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
41. 2G-6754 [1] KNOB (BULLDOZER LIFT, PLOW)  
42. 2G-6740 [1] KNOB-RIPPER  
43. 103-1597 [1] LEVER (BULLDOZER ANGLE, PLOW)  
43A. 103-1597 [1] LEVER (WING TILT)  
44. 2G-7108 [1] KNOB-WING TILT  
45. 7X-0291 [2] BOLT (3/8-16X3.75-IN)  
46. 8W-0456 [4] SHAFT  
47. 8F-6437 [6] WASHER (13.5X50.8X4.76-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP50080895
 

341-6675: VALVE & LINKAGE GP

341-6675 VALVE & LINKAGE GP -6-BANK, RH; 5-BANK, LH
S/N SZM1-UP
PLOW, RIPPER, SCARIFIER
PART OF 355-6242 CONTROL AR-HYDRAULIC
i03580420 SEBP5008
3416675 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 160K MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 341-6220 Y [1] VALVE GP-BANK 6 (RH)  
2. 124-3329 Y [1] VALVE GP-BANK 5 (LH)  
3. 8X-5499 [2] RETAINER  
4. 101-2457 [1] LEVER (RIPPER)  
4A. 101-2457 [1] LEVER (ARTICULATION)  
5. 8D-5634 [1] LEVER (BLADE LIFT, LH)  
5A. 8D-5634 [1] LEVER (CENTERSHIFT)  
6. 8X-4277 [11] ROD AS  
    (EACH INCLUDES)
  6V-8186 [1] NUT-FULL (5/16-24-THD)  
  7H-3641 [1] END-ROD (5/16-24-THD)  
  8L-8598 [1] ROD END  
  146-0705 [1] ROD  
7. 8D-5633 [1] LEVER (SIDESHIFT)  
7A. 8D-5633 [1] LEVER (WHEEL LEAN)  
8. 101-2458 [1] LEVER (BLADE TIP)  
8A. 101-2458 [1] LEVER (SCARIFIER)  
9. 137-4515 [2] BUSHING  
10. 8D-5640 [13] BEARING  
11. 8D-5636 B [10] SHIM (0.254-MM THK)  
12. 8D-5637 B [10] SHIM (0.762-MM THK)  
13. 6L-1962 [11] NUT-JAM (3/8-24-THD)  
14. 8T-9043 [22] BOLT (5/16-18X0.875-IN)  
15. 3F-9556 [22] LOCKWASHER  
16. 8D-5641 [11] BEARING  
17. 2G-6757 [1] KNOB-BLADE LIFT (LH)  
18. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
19. 2G-6749 [1] KNOB-SIDESHIFT  
20. 2G-6747 [1] KNOB-BLADE TIP  
21. 8D-5632 [1] LEVER (CIRCLE DRIVE)  
21A. 8D-5632 [1] LEVER (BLADE LIFT, RH)  
22. 2G-6751 [1] KNOB-CIRCLE DRIVE  
23. 2G-6748 [1] KNOB-BLADE LIFT (RH)  
24. 2G-6756 [1] KNOB-WHEEL LEAN  
25. 2G-6752 [1] KNOB-ARTICULATION  
26. 2G-6755 [1] KNOB-CENTERSHIFT  
27. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
28. 9M-1853 [6] MOUNTING  
29. 5P-1076 [6] WASHER-HARD (13.5X30X4-MM THK)  
30. 104-7740 [1] PLATE AS (LH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
31. 104-7419 [1] PLATE AS (RH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
32. 2G-6753 [1] KNOB-SCARIFIER  
33. 104-7429 [2] PLATE  
34. 137-4516 [1] SHAFT  
35. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
36. 6B-0933 [4] SPACER (10.31X19.05X6.35-MM THK)  
37. 5P-2424 [6] BOLT (1/2-13X2.25-IN)  
38. 6V-8188 [2] NUT (1/2-13-THD)  
39. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
40. 2G-6754 [1] KNOB (BULLDOZER LIFT, PLOW)  
41. 2G-6740 [1] KNOB-RIPPER  
42. 103-1597 [1] LEVER (BULLDOZER LIFT, PLOW)  
43. 8W-0456 [2] SHAFT  
44. 8F-6437 [6] WASHER (13.5X50.8X4.76-MM THK)  
45. 4L-6459 [2] BOLT (3/8-16X2.5-IN)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP50080896
 

341-8565: VALVE & LINKAGE GP

341-8565 VALVE & LINKAGE GP -6-BANK, RH; 5-BANK, LH
S/N SZM1-UP
PLOW, DOZER ANGLE, RIPPER
PART OF 355-6244 CONTROL AR-HYDRAULIC
i03580440 SEBP5008
3418565 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 160K MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3F-9556 [22] LOCKWASHER  
2. 6B-0933 [4] SPACER (10.31X19.05X6.35-MM THK)  
3. 6L-1962 [11] NUT-JAM (3/8-24-THD)  
4. 8D-5632 [1] LEVER (CIRCLE DRIVE)  
4A. 8D-5632 [1] LEVER (BLADE LIFT, RH)  
5. 8D-5633 [1] LEVER (SIDESHIFT)  
5A. 8D-5633 [1] LEVER (WHEEL LEAN)  
6. 8D-5634 [1] LEVER (BLADE LIFT, LH)  
6A. 8D-5634 [1] LEVER (CENTERSHIFT)  
7. 8D-5636 B [10] SHIM (0.254-MM THK)  
8. 8D-5637 B [10] SHIM (0.762-MM THK)  
9. 8D-5640 [13] BEARING  
10. 8D-5641 [11] BEARING  
11. 8W-0456 [2] SHAFT  
12. 8X-4277 [11] ROD AS  
    (EACH INCLUDES)
  6V-8186 [1] NUT-FULL (5/16-24-THD)  
  7H-3641 [1] END-ROD (5/16-24-THD)  
  8L-8598 [1] ROD END  
  146-0705 [1] ROD  
13. 8X-5499 [2] RETAINER  
14. 9M-1853 [6] MOUNTING  
15. 101-2457 [1] LEVER (RIPPER)  
15A. 101-2457 [1] LEVER (ARTICULATION)  
16. 101-2458 [1] LEVER (BLADE TIP)  
16A. 101-2458 [1] LEVER (SCARIFIER)  
17. 103-1597 [1] LEVER (BULLDOZER LIFT, PLOW)  
18. 104-7419 [1] PLATE AS (RH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
19. 104-7429 [2] PLATE  
20. 104-7740 [1] PLATE AS (LH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
21. 137-4515 [2] BUSHING  
22. 137-4516 [1] SHAFT  
23. 164-5608 [2] CONNECTOR AS  
    (EACH INCLUDES)
  8T-1687 [1] CONNECTOR  
  3K-0360 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
24. 244-2585 [1] TUBE AS  
25. 244-2589 [1] TUBE AS  
26. 244-2594 [1] TUBE AS  
27. 244-2598 [1] TUBE AS  
28. 250-0550 Y [1] VALVE GP-BANK 5 (LH)  
29. 341-6226 Y [1] VALVE GP-BANK 6 (RH)  
30. 2G-6754 [1] KNOB (BULLDOZER LIFT, PLOW)  
31. 148-8318 [2] CONNECTOR AS  
    (EACH INCLUDES)
  6V-8634 [1] CONNECTOR  
  3K-0360 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
32. 206-5123 [2] TEE AS  
    (EACH INCLUDES)
  206-5122 [1] TEE  
  6V-8397 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
33. 2G-6740 [1] KNOB-RIPPER  
34. 2G-6747 [1] KNOB-BLADE TIP  
35. 2G-6748 [1] KNOB-BLADE LIFT (RH)  
36. 2G-6749 [1] KNOB-SIDESHIFT  
37. 2G-6751 [1] KNOB-CIRCLE DRIVE  
38. 2G-6752 [1] KNOB-ARTICULATION  
39. 2G-6753 [1] KNOB-SCARIFIER  
40. 2G-6755 [1] KNOB-CENTERSHIFT  
41. 2G-6756 [1] KNOB-WHEEL LEAN  
42. 2G-6757 [1] KNOB-BLADE LIFT (LH)  
43. 3J-1907 [4] SEAL-O-RING  
44. 4L-6459 [2] BOLT (3/8-16X2.5-IN)  
45. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
46. 5P-1076 [6] WASHER-HARD (13.5X30X4-MM THK)  
47. 5P-2424 [6] BOLT (1/2-13X2.25-IN)  
48. 6V-8188 [2] NUT (1/2-13-THD)  
49. 6V-8397 [8] SEAL-O-RING  
50. 6V-9836 [2] TEE-SWIVEL  
51. 8F-6437 [6] WASHER (13.5X50.8X4.76-MM THK)  
52. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
53. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
54. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
55. 8T-9041 [4] CONNECTOR  
56. 8T-9043 [22] BOLT (5/16-18X0.875-IN)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP50080897
 

342-2154: VALVE & LINKAGE GP

342-2154 VALVE & LINKAGE GP -4-BANK, RH; 4-BANK, LH
S/N SZM1-626
PART OF 343-7206 GENERAL AR
i03532800 SEBP5008
3422154 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 160K MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 124-3325 Y [1] VALVE GP-BANK 4 (RH)  
2. 124-3327 Y [1] VALVE GP-BANK 4 (LH)  
3. 8X-5498 [2] RETAINER  
4. 101-2457 [1] LEVER (ARTICULATION)  
5. 8D-5634 [1] LEVER (BLADE LIFT, LH)  
5A. 8D-5634 [1] LEVER (CENTERSHIFT)  
6. 8X-4277 [8] ROD AS  
    (EACH INCLUDES)
  6V-8186 [1] NUT-FULL (5/16-24-THD)  
  7H-3641 [1] END-ROD (5/16-24-THD)  
  8L-8598 [1] ROD END  
  146-0705 [1] ROD  
7. 8D-5633 [1] LEVER (SIDESHIFT)  
7A. 8D-5633 [1] LEVER (WHEEL LEAN)  
8. 101-2458 [1] LEVER (BLADE TIP)  
9. 137-4515 [2] BUSHING  
10. 8D-5640 [10] BEARING  
11. 8D-5636 B [10] SHIM (0.254-MM THK)  
12. 8D-5637 B [10] SHIM (0.762-MM THK)  
13. 6L-1962 [8] NUT-JAM (3/8-24-THD)  
14. 8T-9043 [16] BOLT (5/16-18X0.875-IN)  
15. 3F-9556 [16] LOCKWASHER  
16. 9B-7237 [2] BOLT (3/8-16X1.25-IN)  
17. 8D-5641 [8] BEARING  
18. 2G-6757 [1] KNOB-BLADE LIFT (LH)  
19. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
20. 2G-6749 [1] KNOB-SIDESHIFT  
21. 2G-6747 [1] KNOB-BLADE TIP  
22. 8D-5632 [1] LEVER (CIRCLE DRIVE)  
22A. 8D-5632 [1] LEVER (BLADE LIFT, RH)  
23. 2G-6751 [1] KNOB-CIRCLE DRIVE  
24. 2G-6748 [1] KNOB-BLADE LIFT (RH)  
25. 2G-6756 [1] KNOB-WHEEL LEAN  
26. 2G-6752 [1] KNOB-ARTICULATION  
27. 2G-6755 [1] KNOB-CENTERSHIFT  
28. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
29. 9M-1853 [6] MOUNTING  
30. 5P-1076 [6] WASHER-HARD (13.5X30X4-MM THK)  
31. 104-7740 [1] PLATE AS (LH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
32. 104-7419 [1] PLATE AS (RH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
33. 104-7429 [2] PLATE  
34. 137-4516 [1] SHAFT  
35. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
36. 6B-0933 [4] SPACER (10.31X19.05X6.35-MM THK)  
37. 5P-2424 [6] BOLT (1/2-13X2.25-IN)  
38. 6V-8188 [2] NUT (1/2-13-THD)  
39. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
40. 8F-6437 [6] WASHER (13.5X50.8X4.76-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP50080898
 

342-2154: VALVE & LINKAGE GP

342-2154 VALVE & LINKAGE GP -4-BANK, RH; 4-BANK, LH
S/N SZM10100-UP
i06901018 SEBP5008
3422154 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 160K MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6E-3032 CY [1] VALVE GP-BANK 4 (RH)  
2. 6E-3038 CY [1] VALVE GP-BANK 4 (LH)  
3. 490-1143 [2] RETAINER  
4. 490-1103 C [1] LEVER (ARTICULATION)  
5. 490-1104 C [1] LEVER (BLADE LIFT, LH)  
5A. 490-1104 C [1] LEVER (CENTERSHIFT)  
6. 490-1110 CY [8] ROD AS-ADJUSTING  
7. 490-1105 C [1] LEVER (SIDESHIFT)  
7A. 490-1105 C [1] LEVER (WHEEL LEAN)  
8. 490-1107 C [1] LEVER (BLADE TIP)  
9. 512-5977 C [2] SPACER  
10. 8D-5640 [10] BEARING  
11. 8D-5636 B [10] SHIM (0.254-MM THK)  
12. 8D-5637 B [10] SHIM (0.762-MM THK)  
13. 6L-1962 [8] NUT-JAM (3/8-24-THD)  
14. 8T-9043 [16] BOLT (5/16-18X0.875-IN)  
15. 3F-9556 [16] LOCKWASHER  
16. 9B-7237 [2] BOLT (3/8-16X1.25-IN)  
17. 8D-5641 [8] BEARING  
18. 2G-6757 [1] KNOB-BLADE LIFT (LH)  
19. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
20. 2G-6749 [1] KNOB-SIDESHIFT  
21. 2G-6747 [1] KNOB-BLADE TIP  
22. 490-1106 C [1] LEVER (CIRCLE DRIVE)  
22A. 490-1106 C [1] LEVER (BLADE LIFT, RH)  
23. 2G-6751 [1] KNOB-CIRCLE DRIVE  
24. 2G-6748 [1] KNOB-BLADE LIFT (RH)  
25. 2G-6756 [1] KNOB-WHEEL LEAN  
26. 2G-6752 [1] KNOB-ARTICULATION  
27. 2G-6755 [1] KNOB-CENTERSHIFT  
28. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
29. 9M-1853 [6] MOUNTING  
30. 5P-1076 [6] WASHER-HARD (13.5X30X4-MM THK)  
31. 104-7740 [1] PLATE AS (LH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
32. 104-7419 [1] PLATE AS (RH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
33. 104-7429 [2] PLATE  
34. 137-4516 [1] SHAFT  
35. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
36. 6B-0933 [4] SPACER (10.31X19.05X6.35-MM THK)  
37. 5P-2424 [6] BOLT (1/2-13X2.25-IN)  
38. 6V-8188 [2] NUT (1/2-13-THD)  
39. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
40. 8F-6437 [6] WASHER (13.5X50.8X4.76-MM THK)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP50080899
 

342-2640: VALVE & LINKAGE GP

342-2640 VALVE & LINKAGE GP -4-BANK, RH; 5-BANK, LH
S/N SZM1-UP
RIPPER
PART OF 343-6219 CONTROL AR-HYDRAULIC
i03552188 SEBP5008
3422640 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 160K MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 124-3325 Y [1] VALVE GP-BANK 4 (RH)  
2. 124-3329 Y [1] VALVE GP-BANK 5 (LH)  
3. 8X-5499 [2] RETAINER  
4. 101-2457 [1] LEVER (RIPPER)  
4A. 101-2457 [1] LEVER (ARTICULATION)  
5. 8D-5634 [1] LEVER (BLADE LIFT, LH)  
5A. 8D-5634 [1] LEVER (CENTERSHIFT)  
6. 8X-4277 [9] ROD AS  
    (EACH INCLUDES)
  6V-8186 [1] NUT-FULL (5/16-24-THD)  
  7H-3641 [1] END-ROD (5/16-24-THD)  
  8L-8598 [1] ROD END  
  146-0705 [1] ROD  
7. 8D-5633 [1] LEVER (SIDESHIFT)  
7A. 8D-5633 [1] LEVER (WHEEL LEAN)  
8. 101-2458 [1] LEVER (BLADE TIP)  
9. 137-4515 [2] BUSHING  
10. 8D-5640 [11] BEARING  
11. 8D-5636 B [10] SHIM (0.254-MM THK)  
12. 8D-5637 B [10] SHIM (0.762-MM THK)  
13. 6L-1962 [9] NUT-JAM (3/8-24-THD)  
14. 8T-9043 [18] BOLT (5/16-18X0.875-IN)  
15. 3F-9556 [18] LOCKWASHER  
16. 9B-7237 [2] BOLT (3/8-16X1.25-IN)  
17. 8D-5641 [9] BEARING  
18. 2G-6757 [1] KNOB-BLADE LIFT (LH)  
19. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
20. 2G-6749 [1] KNOB-SIDESHIFT  
21. 2G-6747 [1] KNOB-BLADE TIP  
22. 8D-5632 [1] LEVER (CIRCLE DRIVE)  
22A. 8D-5632 [1] LEVER (BLADE LIFT, RH)  
23. 2G-6751 [1] KNOB-CIRCLE DRIVE  
24. 2G-6748 [1] KNOB-BLADE LIFT (RH)  
25. 2G-6756 [1] KNOB-WHEEL LEAN  
26. 2G-6752 [1] KNOB-ARTICULATION  
27. 2G-6755 [1] KNOB-CENTERSHIFT  
28. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
29. 9M-1853 [6] MOUNTING  
30. 5P-1076 [6] WASHER-HARD (13.5X30X4-MM THK)  
31. 104-7740 [1] PLATE AS (LH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
32. 104-7419 [1] PLATE AS (RH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
33. 104-7429 [2] PLATE  
34. 137-4516 [1] SHAFT  
35. 2G-6740 [1] KNOB-RIPPER  
36. 6B-0933 [4] SPACER (10.31X19.05X6.35-MM THK)  
37. 5P-2424 [6] BOLT (1/2-13X2.25-IN)  
38. 6V-8188 [2] NUT (1/2-13-THD)  
39. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
40. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
41. 8F-6437 [6] WASHER (13.5X50.8X4.76-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Caterpillar Parts SIS Catalog 160K :

TANK & FILTER GP-HYDRAULIC
214-1984 TANK & FILTER GP-HYDRAULIC
SWIVEL GP
260-6502 SWIVEL GP
SWASHPLATE GP
169-3290 SWASHPLATE GP
515-2775 STEERING AR-SECONDARY
SHAFT GP-PUMP DRIVE
311-0514 SHAFT GP-PUMP DRIVE
ROTATING GP-PUMP
6E-6571 ROTATING GP-PUMP
ROTATING GP-PUMP
100-3412 ROTATING GP-PUMP
ROD AS-ADJUSTING
490-1110 ROD AS-ADJUSTING
VALVE & LINKAGE GP
115-0812 VALVE & LINKAGE GP
VALVE & LINKAGE GP
138-7599 VALVE & LINKAGE GP
VALVE & LINKAGE GP
331-1510 VALVE & LINKAGE GP
VALVE & LINKAGE GP
341-6674 VALVE & LINKAGE GP
VALVE & LINKAGE GP
341-6675 VALVE & LINKAGE GP
VALVE & LINKAGE GP
341-8565 VALVE & LINKAGE GP
VALVE & LINKAGE GP
342-2154 VALVE & LINKAGE GP
VALVE & LINKAGE GP
342-2154 VALVE & LINKAGE GP

Truck sale:

Caterpillar 160K
 
Caterpillar 160K
- motor graders
CATERPILLAR INTERNATIONAL SERVICES DEL PERU S.A.
Caterpillar 160K, bergbau-motorgrader, Bau-Und Bergbauausrüstung
217.656 
Caterpillar 160K, bergbau-motorgrader, Bau-Und Bergbauausrüstung
- motor graders
TOROMONT CAT
Canada
Caterpillar 160K, Construction
139,838 
Caterpillar 160K, Construction
- motor graders
FINNING CANADA
Canada
 
 
Caterpillar 160K, motor graders, Construction
- motor graders
ZAHID TRACTOR & HEAVY MACHINERY COMPANY
Saudi Arabia
Caterpillar 160K, Construction
 
Caterpillar 160K, Construction
- motor graders
BARLOWORLD MONGOLIA LLC
Mongolia
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.