AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

511-0964 VALVE GP-BANK 7 S/N SZM10100-UP PART OF 434-6596, 516-4143 VALVE & LINKAGE GP 160K MOTOR GRADER


HYDRAULIC SYSTEM
VALVE GP-BANK
VALVE GP-COMBINATION
VALVE GP-CONTROL

MOTOR GRADER 160K MOTOR GRADER SZM
 160K Motor Grader SZM00001-UP (MACHINE) POWERED BY C7 Engine SEBP5008 160K SZM   (2009)

HYDRAULIC SYSTEM

VALVE GP-BANK
VALVE GP-BANK 6
513-0869 VALVE GP-BANK 6
VALVE GP-BANK 7
341-6222 VALVE GP-BANK 7
VALVE GP-BANK 7
511-0964 VALVE GP-BANK 7
 

#SEBP50080930
 

511-0964: VALVE GP-BANK 7

511-0964 VALVE GP-BANK 7
S/N SZM10100-UP
PART OF 434-6596, 516-4143 VALVE & LINKAGE GP
i06904689 SEBP5008
5110964 VALVE GP-BANK 7 Parts scheme
  For full view, you need register

Parts for your 160K MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7X-2546 M [2] BOLT (M10X1.5X180-MM)  
2. 8T-6408 M [4] BOLT (M10X1.5X160-MM)  
3. 6E-3034 Y [1] VALVE GP-CONTROL (BLADE TIP)  
4. 6E-3035 Y [1] VALVE GP-CONTROL (CIRCLE DRIVE)  
5. 6E-3036 Y [1] VALVE GP-CONTROL (SIDESHIFT)  
6. 6E-3037 Y [1] VALVE GP-CONTROL (BLADE LIFT)  
7. 8T-4121 [6] WASHER-HARD (11X21X2.5-MM THK)  
8. 561-5574 [8] SEAL-INTEGRAL  
9. 101-9346 [1] COVER  
10. 102-8385 [1] MANIFOLD  
11. 107-0545 Y [1] VALVE GP-CONTROL (RIPPER, LH)(RIPPER)  
12. 137-8104 Y [1] VALVE GP-CONTROL (WING TILT)  
13. 137-8106 Y [1] VALVE GP-CONTROL (WING LIFT)  
14. 366-4696 [1] PLUG AS  
  4J-7533 [1] SEAL-O-RING  
  [1] PLUG (5/16-24-THD)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP50080931
 

9T-5957: VALVE GP-COMBINATION

9T-5957 VALVE GP-COMBINATION
S/N SZM1-UP
PART OF 299-5544, 434-8064 LINES GP-PUMP
Type 1
i03535942 SEBP5008
9T5957 VALVE GP-COMBINATION Parts scheme
  For full view, you need register

Parts for your 160K MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9T-5935 [1] BODY  
2. 100-6021 Y [1] VALVE GP-RELIEF (STEERING)  
3. 3J-3679 [1] PLUG AS  
  1J-9671 [1] SEAL-O-RING  
  9S-8003 [1] PLUG (1/2-20-THD)  
4. 3T-8236 [1] SPRING  
5. 6V-5230 M [2] BOLT (M10X1.5X60-MM)  
6. 6V-3965 [1] FITTING (QUICK DISCONNECT)  
7. 3J-1907 [1] SEAL-O-RING  
8. 6V-8647 [2] CONNECTOR  
9. 3J-7354 [2] SEAL-O-RING  
10. 6E-1923 [1] TUBE AS  
11. 4J-5477 [2] SEAL-O-RING  
12. 4T-4935 Y [1] VALVE GP-RELIEF (MAIN)  
13. 8T-8987 [1] ELBOW  
14. 2M-9780 [1] SEAL-O-RING  
15. 1H-0337 [1] VALVE  
16. 9F-6705 [1] SPRING  
17. 9S-4189 [1] PLUG  
18. 6E-1924 [1] SPRING (OUTER)  
19. 6E-1925 [1] SPRING (INNER)  
20. 5M-2057 [1] SEAL-O-RING  
21. 8M-3175 [2] WASHER-HARD (10.2X16X3-MM THK)  
22. 6V-0852 [1] CAP-DUST  
23. 6E-4703 Y [1] VALVE GP-RELIEF (IMPLEMENT SIGNAL)  
24. 3K-0360 [1] SEAL-O-RING  
25. 173-3993 [2] PLUG AS  
    (EACH INCLUDES)
  4J-7533 [1] SEAL-O-RING  
  9S-8001 [1] PLUG  
27. 4T-1860 Y [1] VALVE GP-SHUTTLE (BALL RESOLVER)(SIGNAL)  
30. 2S-4078 [1] SEAL-O-RING  
31. 3R-2437 [1] PLUG AS  
  4K-1388 [1] SEAL-O-RING  
  9S-8009 [1] PLUG-O-RING  
32. 6V-8398 [1] SEAL-O-RING  
33. 7X-4776 [2] RING-BACKUP  
34. 183-7263 [1] PLUG AS  
  3J-7354 [1] SEAL-O-RING  
  9S-8002 [1] PLUG (7/16-20-THD)  
35. 131-8350 Y [1] VALVE GP-PURGE (IMPLEMENT SIGNAL)  
36. 3P-9498 [1] PLUG-ORIFICE  
37. [1] VALVE  
38. 8J-6815 [2] PLUG-ORIFICE  
39. [3] PLUG AS  
    (EACH INCLUDES)
  9S-4183 [1] PLUG (1-1/16-12-THD)  
  3D-2824 [1] SEAL-O-RING  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP50080932
 

9T-5957: VALVE GP-COMBINATION

9T-5957 VALVE GP-COMBINATION
S/N SZM1-UP
PART OF 299-5544, 434-8064 LINES GP-PUMP
Type 2
i04905044 SEBP5008
9T5957 VALVE GP-COMBINATION Parts scheme
  For full view, you need register

Parts for your 160K MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9T-5935 [1] BODY  
2. 100-6021 Y [1] VALVE GP-RELIEF (STEERING)  
3. 3J-3679 [1] PLUG AS  
  1J-9671 [1] SEAL-O-RING  
  9S-8003 [1] PLUG (1/2-20-THD)  
4. 3T-8236 [1] SPRING  
5. 6V-5230 M [2] BOLT (M10X1.5X60-MM)  
6. 6V-3965 [1] FITTING (QUICK DISCONNECT)  
7. 3J-1907 [1] SEAL-O-RING  
8. 6V-8647 [2] CONNECTOR  
9. 3J-7354 [2] SEAL-O-RING  
10. 6E-1923 [1] TUBE AS  
11. 4J-5477 [2] SEAL-O-RING  
12. 4T-4935 Y [1] VALVE GP-RELIEF (MAIN)  
13. 8T-8987 [1] ELBOW  
14. 2M-9780 [1] SEAL-O-RING  
15. 1H-0337 [1] VALVE  
16. 9F-6705 [1] SPRING  
17. 9S-4189 [1] PLUG  
18. 6E-1924 [1] SPRING (OUTER)  
19. 6E-1925 [1] SPRING (INNER)  
20. 5M-2057 [1] SEAL-O-RING  
21. 8M-3175 [2] WASHER-HARD (10.2X16X3-MM THK)  
22. 6V-0852 [1] CAP-DUST  
23. 330-7743 CY [1] VALVE GP-RELIEF (IMPLEMENT SIGNAL)  
24. 3K-0360 [1] SEAL-O-RING  
25. 173-3993 [2] PLUG AS  
    (EACH INCLUDES)
  4J-7533 [1] SEAL-O-RING  
  9S-8001 [1] PLUG  
27. 4T-1860 Y [1] VALVE GP-SHUTTLE (BALL RESOLVER)(SIGNAL)  
30. 2S-4078 [1] SEAL-O-RING  
31. 3R-2437 [1] PLUG AS  
  4K-1388 [1] SEAL-O-RING  
  9S-8009 [1] PLUG-O-RING  
32. 6V-8398 [1] SEAL-O-RING  
33. 100-7000 [2] RING-BACKUP  
34. 183-7263 [1] PLUG AS  
  3J-7354 [1] SEAL-O-RING  
  9S-8002 [1] PLUG (7/16-20-THD)  
35. 131-8350 Y [1] VALVE GP-PURGE (IMPLEMENT SIGNAL)  
36. 3P-9498 [1] PLUG-ORIFICE  
37. [1] VALVE  
38. 8J-6815 [2] PLUG-ORIFICE  
39. [3] PLUG AS  
    (EACH INCLUDES)
  9S-4183 [1] PLUG (1-1/16-12-THD)  
  3D-2824 [1] SEAL-O-RING  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP50080933
 

107-0545: VALVE GP-CONTROL

107-0545 VALVE GP-CONTROL -RIPPER
S/N SZM1-UP
PART OF 104-8645, 124-3329, 250-0550 VALVE GP-BANK 5, 341-6222, 511-0964 VALVE GP-BANK 7
i03554786 SEBP5008
1070545 VALVE GP-CONTROL Parts scheme
  For full view, you need register

Parts for your 160K MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6E-4599 [1] BODY  
2. 101-1148 [1] STEM  
3. 101-1978 [1] COVER  
4. 2K-8199 [2] SEAL-O-RING  
5. 8T-4189 M [4] BOLT (M8X1.25X20-MM)  
6. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
7. 101-1984 [1] BODY  
8. 354-9444 C [2] VALVE GP-CHECK  
    (EACH INCLUDES)
  6E-3013 [1] SEAT  
9. 139-8472 Y [1] VALVE GP-RELIEF (RIPPER)  
11. 102-7412 [1] SPRING  
12. 101-1973 [4] RETAINER  
13. 101-1971 [1] LEVER  
14. 340-5472 [1] LEVER AS (LH)  
15. 8M-4437 C [2] SEAL-O-RING  
17. 4D-9986 [1] SEAL-O-RING  
18. 101-2480 [1] COVER  
19. 8T-4138 M [2] BOLT (M6X1X20-MM)  
20. 5B-9318 [1] BALL  
21. 6E-3007 [1] SPRING  
22. 6E-4502 [1] PLUG  
23. 4J-7533 [1] SEAL-O-RING  
24. 6E-3019 [1] VALVE  
25. 6E-5153 [1] SPRING  
26. 108-2187 [1] PLUG-PIPE  
29. 148-8395 [1] PLUG AS  
  3K-0360 [1] SEAL-O-RING  
  9S-8005 [1] PLUG (3/4-16-THD)  
31. 106-3659 [1] PISTON  
34. 111-8233 [1] SPRING  
35. 3K-0360 [2] SEAL-O-RING  
36. 9J-0403 [2] SPRING  
37. 9J-0404 [2] PLUG  
38. 361-3549 [2] SEAL-O-RING  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP50080934
 

107-0547: VALVE GP-CONTROL

107-0547 VALVE GP-CONTROL -BULLDOZER LIFT, PLOW
S/N SZM10100-UP
PART OF 511-0965 VALVE GP-BANK 6
i06917185 SEBP5008
1070547 VALVE GP-CONTROL Parts scheme
  For full view, you need register

Parts for your 160K MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6E-3059 [1] BODY  
2. 221-3678 [1] STEM  
3. 101-1980 [1] HOUSING  
4. 108-4916 Y [1] DETENT GP-CONTROL VALVE (BULLDOZER LIFT, PLOW)  
5. 5B-9318 [1] BALL  
6. 8T-6869 M [2] BOLT (M8X1.25X60-MM)  
7. 2K-8199 [2] SEAL-O-RING  
8. 8T-4189 M [2] BOLT (M8X1.25X20-MM)  
9. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
10. 101-1984 [1] BODY  
11. 102-7412 [1] SPRING  
12. 101-1973 [4] RETAINER  
13. 101-1971 [1] LEVER  
14. 340-5470 [1] LEVER AS (RH)  
15. 8M-4437 [2] SEAL-O-RING  
17. 4D-9986 [1] SEAL-O-RING  
18. 101-2480 [1] COVER  
19. 8T-4138 M [2] BOLT (M6X1X20-MM)  
20. 6E-3007 [1] SPRING  
21. 6E-4502 [1] PLUG  
22. 4J-7533 [1] SEAL-O-RING  
23. 6E-3019 [1] VALVE  
24. 6E-5153 [1] SPRING  
25. 108-2187 [1] PLUG-PIPE  
26. 148-8395 [1] PLUG AS  
  9S-8005 [1] PLUG (3/4-16-THD)  
  3K-0360 [1] SEAL-O-RING  
27. 106-3660 [2] PISTON  
28. 222-7774 Y [1] VALVE GP-RELIEF (BULLDOZER LIFT, PLOW)  
30. 111-8234 [1] SPRING  
31. 325-6423 C [2] VALVE GP-CHECK  
    (EACH INCLUDES)
  3K-0360 [1] SEAL-O-RING  
  7J-9933 [1] SEAL-O-RING  
32. 3K-0360 C [2] SEAL-O-RING  
33. 9J-0403 C [2] SPRING  
34. 9J-0404 C [2] PLUG  
35. 361-3549 C [2] SEAL-O-RING  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP50080935
 

115-1007: VALVE GP-CONTROL

115-1007 VALVE GP-CONTROL -DOZER ANGLE, SNOW PLOW
S/N SZM1-UP
PART OF 341-6224, 511-0965 VALVE GP-BANK 6
i03596300 SEBP5008
1151007 VALVE GP-CONTROL Parts scheme
  For full view, you need register

Parts for your 160K MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4D-9986 [1] SEAL-O-RING  
2. 6E-3007 [1] SPRING  
3. 6E-3019 [1] VALVE  
4. 6E-4502 [1] PLUG  
5. 6E-4599 [1] BODY  
6. 6E-5153 [1] SPRING  
7. 340-5470 [1] LEVER AS (RH)  
8. 101-1971 [1] LEVER  
9. 101-1973 [4] RETAINER  
10. 101-1978 [1] COVER  
11. 101-1984 [1] BODY  
12. 101-2480 [1] COVER  
13. 102-4578 [1] STEM  
14. 102-7412 [1] SPRING  
15. 106-3659 [1] PISTON  
16. 111-8233 [1] SPRING  
18. 139-8472 Y [1] VALVE GP-RELIEF (BULLDOZER ANGLE, PLOW)  
19. 354-9444 C [2] VALVE GP-CHECK  
    (EACH INCLUDES)
  6E-3013 [1] SEAT  
  106-3658 [1] VALVE  
21. 108-2187 [1] PLUG-PIPE  
22. 148-8395 C [1] PLUG AS  
  3K-0360 [1] SEAL-O-RING  
  9S-8005 [1] PLUG (3/4-16-THD)  
23. 2K-8199 [2] SEAL-O-RING  
24. 4J-7533 [1] SEAL-O-RING  
25. 5B-9318 [1] BALL  
26. 8M-4437 [2] SEAL-O-RING  
27. 8T-4138 M [2] BOLT (M6X1X20-MM)  
28. 8T-4189 M [4] BOLT (M8X1.25X20-MM)  
29. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
30. 3K-0360 [2] SEAL-O-RING  
31. 9J-0403 [2] SPRING  
32. 9J-0404 [2] PLUG  
33. 361-3549 [2] SEAL-O-RING  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP50080936
 

124-2883: VALVE GP-CONTROL

124-2883 VALVE GP-CONTROL -BLADE LIFT
S/N SZM1-UP
PART OF 124-3327 VALVE GP-BANK 4, 124-3329 VALVE GP-BANK 5, 341-6222 VALVE GP-BANK 7
i03532882 SEBP5008
1242883 VALVE GP-CONTROL Parts scheme
  For full view, you need register

Parts for your 160K MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4D-9986 [1] SEAL-O-RING  
2. 6E-3007 [1] SPRING  
3. 6E-3019 [1] VALVE  
4. 6E-4502 [1] PLUG  
5. 6E-5153 [1] SPRING  
6. 101-1971 [1] LEVER  
7. 101-1973 [4] RETAINER  
8. 101-1978 [1] COVER  
9. 101-1984 [1] BODY  
10. 101-2480 [1] COVER  
11. 102-7412 [1] SPRING  
12. 106-3659 C [1] PISTON  
13. 111-8233 [1] SPRING  
14. 123-3115 [1] BODY  
16. 124-3330 C [1] STEM  
17. 222-7774 CY [1] VALVE GP-RELIEF (BLADE LIFT)  
18. 354-9444 [2] VALVE GP-CHECK  
    (EACH INCLUDES)
  6E-3013 [1] SEAT  
19. 340-5472 [1] LEVER AS (LH)  
20. 108-2187 [1] PLUG-PIPE  
21. 148-8395 [1] PLUG AS  
  9S-8005 [1] PLUG (3/4-16-THD)  
  3K-0360 [1] SEAL-O-RING  
22. 2K-8199 [2] SEAL-O-RING  
23. 4J-7533 [1] SEAL-O-RING  
24. 5B-9318 [1] BALL  
25. 8M-4437 [2] SEAL-O-RING  
26. 8T-4138 M [2] BOLT (M6X1X20-MM)  
27. 8T-4189 M [4] BOLT (M8X1.25X20-MM)  
28. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
29. 3K-0360 [2] SEAL-O-RING  
30. 9J-0403 [2] SPRING  
31. 9J-0404 [2] PLUG  
32. 361-3549 [2] SEAL-O-RING  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP50080937
 

124-2884: VALVE GP-CONTROL

124-2884 VALVE GP-CONTROL -BLADE LIFT
S/N SZM1-UP
PART OF 124-3325 VALVE GP-BANK 4, 124-3326 VALVE GP-BANK 5, 341-6220, 341-6224 VALVE GP-BANK 6
i03531150 SEBP5008
1242884 VALVE GP-CONTROL Parts scheme
  For full view, you need register

Parts for your 160K MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 111-8233 [1] SPRING  
2. 124-3330 [1] STEM  
3. 101-1978 [1] COVER  
4. 2K-8199 [2] SEAL-O-RING  
5. 8T-4189 M [4] BOLT (M8X1.25X20-MM)  
6. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
9. 222-7774 CY [1] VALVE GP-RELIEF (BLADE LIFT)  
10. 106-3659 C [1] PISTON  
11. 102-7412 [1] SPRING  
12. 101-1973 [4] RETAINER  
13. 101-1971 [1] LEVER  
14. 340-5470 [1] LEVER AS (RH)  
15. 8M-4437 [2] SEAL-O-RING  
17. 4D-9986 [1] SEAL-O-RING  
18. 101-2480 [1] COVER  
19. 8T-4138 M [2] BOLT (M6X1X20-MM)  
20. 5B-9318 [1] BALL  
21. 6E-3007 [1] SPRING  
22. 6E-4502 [1] PLUG  
23. 4J-7533 [1] SEAL-O-RING  
24. 3K-0360 [2] SEAL-O-RING  
25. 6E-5153 [1] SPRING  
26. 108-2187 [1] PLUG-PIPE  
27. 9J-0403 [2] SPRING  
28. 9J-0404 [2] PLUG  
29. 148-8395 [1] PLUG AS  
  3K-0360 [1] SEAL-O-RING  
  9S-8005 [1] PLUG (3/4-16-THD)  
30. 361-3549 [2] SEAL-O-RING  
31. 354-9444 [2] VALVE GP-CHECK  
    (EACH INCLUDES)
  6E-3013 [1] SEAT  
32. 6E-3019 [1] VALVE  
33. 101-1984 [1] BODY  
34. 123-3115 [1] BODY  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP50080938
 

124-2885: VALVE GP-CONTROL

124-2885 VALVE GP-CONTROL -BULLDOZER LIFT, PLOW
S/N SZM1-UP
PART OF 124-3326 VALVE GP-BANK 5, 341-6220, 341-6224, 341-6226, 513-0869 VALVE GP-BANK 6
i03569622 SEBP5008
1242885 VALVE GP-CONTROL Parts scheme
  For full view, you need register

Parts for your 160K MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6E-4599 [1] BODY  
2. 6E-3007 [1] SPRING  
3. 101-1978 [1] COVER  
4. 2K-8199 [2] SEAL-O-RING  
5. 8T-4189 M [4] BOLT (M8X1.25X20-MM)  
6. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
7. 101-1984 [1] BODY  
8. 6E-5153 [1] SPRING  
9. 101-1971 [1] LEVER  
10. 101-1973 [4] RETAINER  
11. 101-2480 [1] COVER  
12. 102-4574 [1] STEM  
13. 340-5470 [1] LEVER AS (RH)  
14. 102-7412 [1] SPRING  
16. 4D-9986 [1] SEAL-O-RING  
17. 111-8233 [1] SPRING  
18. 8T-4138 M [2] BOLT (M6X1X20-MM)  
19. 5B-9318 [1] BALL  
21. 6E-4502 [1] PLUG  
22. 4J-7533 [1] SEAL-O-RING  
23. 6E-3019 [1] VALVE  
24. 222-7774 Y [1] VALVE GP-RELIEF (BULLDOZER LIFT, PLOW)  
25. 108-2187 [1] PLUG-PIPE  
26. 148-8395 [1] PLUG AS  
  3K-0360 [1] SEAL-O-RING  
  9S-8005 [1] PLUG (3/4-16-THD)  
27. 106-3659 [1] PISTON  
28. 9J-0404 [2] PLUG  
29. 8M-4437 [2] SEAL-O-RING  
30. 3K-0360 [2] SEAL-O-RING  
31. 9J-0403 [2] SPRING  
32. 354-9444 [2] VALVE GP-CHECK  
33. 361-3549 [2] SEAL-O-RING  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP50080939
 

137-8104: VALVE GP-CONTROL

137-8104 VALVE GP-CONTROL -WING TILT
S/N SZM1-UP
PART OF 341-6222, 511-0964 VALVE GP-BANK 7
i03596268 SEBP5008
1378104 VALVE GP-CONTROL Parts scheme
  For full view, you need register

Parts for your 160K MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 137-8107 [1] BODY  
2. 102-4577 [1] STEM  
3. 101-1978 [1] COVER  
4. 2K-8199 [2] SEAL-O-RING  
5. 8T-4189 M [4] BOLT (M8X1.25X20-MM)  
6. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
7. 101-1984 [1] BODY  
8. 106-3659 [1] PISTON  
10. 102-7412 [1] SPRING  
11. 101-1973 [4] RETAINER  
12. 101-1971 [1] LEVER  
13. 340-5472 [1] LEVER AS (LH)  
14. 8M-4437 [2] SEAL-O-RING  
16. 4D-9986 [1] SEAL-O-RING  
17. 101-2480 [1] COVER  
18. 8T-4138 M [2] BOLT (M6X1X20-MM)  
19. 5B-9318 [1] BALL  
20. 6E-3007 [1] SPRING  
21. 6E-4502 [1] PLUG  
22. 4J-7533 [1] SEAL-O-RING  
23. 6E-3019 [1] VALVE  
24. 6E-5153 [1] SPRING  
25. 108-2187 [1] PLUG-PIPE  
26. 139-8472 Y [2] VALVE GP-RELIEF (WING TILT)  
27. 111-8233 [1] SPRING  
28. 354-9444 C [2] VALVE GP-CHECK  
    (EACH INCLUDES)
  6E-3013 [1] SEAT  
  106-3658 [1] VALVE  
29. 148-8395 C [1] PLUG AS  
  9S-8005 [1] PLUG (3/4-16-THD)  
  3K-0360 [1] SEAL-O-RING  
30. 3K-0360 [2] SEAL-O-RING  
31. 9J-0403 [2] SPRING  
32. 9J-0404 [2] PLUG  
33. 361-3549 [2] SEAL-O-RING  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Caterpillar Parts SIS Catalog 160K :

VALVE GP-BANK 7
341-6222 VALVE GP-BANK 7
VALVE GP-BANK 6
513-0869 VALVE GP-BANK 6
VALVE GP-BANK 6
511-0965 VALVE GP-BANK 6
VALVE GP-BANK 6
341-6226 VALVE GP-BANK 6
VALVE GP-BANK 6
341-6226 VALVE GP-BANK 6
VALVE GP-BANK 6
341-6224 VALVE GP-BANK 6
VALVE GP-BANK 6
341-6220 VALVE GP-BANK 6
VALVE GP-BANK 5
250-0550 VALVE GP-BANK 5
VALVE GP-COMBINATION
9T-5957 VALVE GP-COMBINATION
VALVE GP-COMBINATION
9T-5957 VALVE GP-COMBINATION
VALVE GP-CONTROL
107-0545 VALVE GP-CONTROL
VALVE GP-CONTROL
107-0547 VALVE GP-CONTROL
VALVE GP-CONTROL
115-1007 VALVE GP-CONTROL
VALVE GP-CONTROL
124-2883 VALVE GP-CONTROL
VALVE GP-CONTROL
124-2884 VALVE GP-CONTROL
VALVE GP-CONTROL
124-2885 VALVE GP-CONTROL

Truck sale:

Caterpillar 160K
 
Caterpillar 160K
- motor graders
CATERPILLAR INTERNATIONAL SERVICES DEL PERU S.A.
Caterpillar 160K, bergbau-motorgrader, Bau-Und Bergbauausrüstung
217.656 
Caterpillar 160K, bergbau-motorgrader, Bau-Und Bergbauausrüstung
- motor graders
TOROMONT CAT
Canada
Caterpillar 160K, Construction
139,838 
Caterpillar 160K, Construction
- motor graders
FINNING CANADA
Canada
 
 
Caterpillar 160K, motor graders, Construction
- motor graders
ZAHID TRACTOR & HEAVY MACHINERY COMPANY
Saudi Arabia
Caterpillar 160K, Construction
 
Caterpillar 160K, Construction
- motor graders
BARLOWORLD MONGOLIA LLC
Mongolia
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.