WORK TOOLS
GROUND ENGAGING TOOLS (G.E.T.)BLADE GP
WORK TOOLS
GROUND ENGAGING TOOLS (G.E.T.)
#SEBP50081230
356-5241: EDGE-CUTTING
For full view, you need register
Parts for your 160K MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| (NO SERVICED PARTS) | ||||
#SEBP50081231
441-4085: EDGE-CUTTING
For full view, you need register
Parts for your 160K MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| (NO SERVICED PARTS) | ||||
#SEBP50081232
4Z-8346: EDGE-CUTTING
4Z-8346 EDGE-CUTTING -SERRATED
S/N SZM1-UP
S/N SZM1-UP
For full view, you need register
Parts for your 160K MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| (NO SERVICED PARTS) | ||||
#SEBP50081233
4Z-8785: EDGE-CUTTING
For full view, you need register
Parts for your 160K MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| (NO SERVICED PARTS) | ||||
#SEBP50081234
261-8536: LIFT GP-BLADE
For full view, you need register
Parts for your 160K MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7D-8875 | [4] | WASHER-THRUST (2.515X3.62X0.075-IN THK) | |
| 2. | 7D-8878 | [4] | WASHER-THRUST (3.015X4.22X0.075-IN THK) | |
| 3. | 7D-8879 B | [8] | SHIM (0.127-MM THK) | |
| 4. | 7D-8881 B | [6] | SHIM (0.254-MM THK) | |
| 5. | 7D-8882 B | [2] | SHIM (0.508-MM THK) | |
| 6. | 8D-4336 B | [2] | WASHER-THRUST (76.6X146X1.90-MM THK) | |
| 7. | 8X-5106 | [1] | STUD-BALL | |
| 8. | 8X-5107 | [1] | PIN | |
| 9. | 8X-5109 | [1] | BAR AS | |
| 8X-5108 | [2] | BUSHING | ||
| 124-5836 | [5] | BUSHING | ||
| 10. | 123-8187 B | [2] | WASHER-THRUST (76.6X146X1-MM THK) | |
| 11. | 201-8034 M | [6] | BOLT (M20X2.5X120-MM) | |
| 12. | 259-2627 M | [4] | BOLT (M12X1.75X40-MM) | |
| 13. | 259-4483 | [2] | PIN | |
| 14. | 259-4492 | [2] | LOCK | |
| 15. | 261-8537 | [1] | ARM AS (LH) | |
| 7D-8889 | [1] | BEARING (76.35-MM ID) | ||
| 8D-8168 | [1] | BEARING (63.65-MM ID) | ||
| 16. | 261-8538 | [1] | ARM AS (RH) | |
| 7D-8889 | [1] | BEARING (76.35-MM ID) | ||
| 8D-8168 | [1] | BEARING (63.65-MM ID) | ||
| 17. | 261-8541 | [2] | YOKE AS | |
| 2G-8233 | [1] | RING | ||
| 18. | 261-8543 | [2] | RETAINER | |
| 19. | 261-8545 | [1] | PLATE | |
| 20. | 261-8547 | [2] | LOCK | |
| 21. | 288-0735 M | [1] | BOLT (M12X1.75X60-MM) | |
| 22. | 112-3926 M | [4] | BOLT (M20X2.5X110-MM) | |
| 23. | 267-3508 | [16] | WASHER-HARD (22X35X3.5-MM THK) | |
| 24. | 279-6632 | [5] | WASHER (13.5X25.5X3-MM THK) | |
| 25. | 286-0742 M | [6] | NUT (M20X2.5-THD) | |
| 26. | 3P-1461 | [4] | SEAL-LIP TYPE | |
| 27. | 5F-0149 | [2] | SEAL-O-RING | |
| 28. | 7D-8876 | [2] | WASHER-THRUST (65.07X92.08X2.39-MM THK) | |
| 29. | 7D-8877 | [2] | WASHER-THRUST (77.77X107.19X2.39-MM THK) | |
| 30. | 7D-8883 | [2] | SEAL | |
| 31. | 7D-8884 | [2] | SEAL | |
| 32. | 7H-2444 | [2] | SEAL-O-RING | |
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
#SEBP50081235
296-3008: LIFT GP-BLADE
For full view, you need register
Parts for your 160K MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7D-8875 | [4] | WASHER-THRUST (2.515X3.62X0.075-IN THK) | |
| 2. | 7D-8878 | [4] | WASHER-THRUST (3.015X4.22X0.075-IN THK) | |
| 3. | 7D-8879 B | [8] | SHIM (0.127-MM THK) | |
| 4. | 7D-8881 B | [6] | SHIM (0.254-MM THK) | |
| 5. | 7D-8882 B | [2] | SHIM (0.508-MM THK) | |
| 6. | 8D-4336 B | [2] | WASHER-THRUST (76.6X146X1.90-MM THK) | |
| 7. | 8X-5106 | [1] | STUD-BALL | |
| 8. | 8X-5107 | [1] | PIN | |
| 9. | 381-0356 | [1] | BAR AS-LINK | |
| 9A. | 8X-5108 | [2] | BUSHING | |
| 9B. | 382-4604 | [7] | BUSHING | |
| 10. | 123-8187 B | [6] | WASHER-THRUST (76.6X146X1-MM THK) | |
| 11. | 201-8034 M | [6] | BOLT (M20X2.5X120-MM) | |
| 12. | 8T-0558 M | [4] | BOLT-SELF-LOCKING (M12X1.75X50-MM) | |
| 13. | 259-4483 | [2] | PIN | |
| 14. | 259-4492 | [2] | LOCK | |
| 15. | 296-3004 | [1] | ARM AS-LIFT (LH) | |
| 15A. | 7D-8889 | [1] | BEARING (76.35-MM ID) | |
| 15B. | 8D-8168 | [1] | BEARING (63.65-MM ID) | |
| 16. | 296-3005 | [1] | ARM AS-LIFT (RH) | |
| 16A. | 7D-8889 | [1] | BEARING (76.35-MM ID) | |
| 16B. | 8D-8168 | [1] | BEARING (63.65-MM ID) | |
| 17. | 261-8541 | [2] | YOKE AS | |
| (EACH INCLUDES) | ||||
| 2G-8233 | [1] | RING | ||
| 18. | 261-8543 | [2] | RETAINER | |
| 19. | 261-8545 | [1] | PLATE | |
| 20. | 261-8547 | [2] | LOCK | |
| 21. | 8T-4910 M | [1] | BOLT (M12X1.75X60-MM) | |
| 22. | 112-3926 M | [4] | BOLT (M20X2.5X110-MM) | |
| 23. | 8T-4123 | [16] | WASHER (22X35X3.5-MM THK) | |
| 24. | 8T-4223 | [1] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 25. | 8T-4131 M | [6] | NUT (M20X2.5-THD) | |
| 26. | 3P-1461 | [4] | SEAL-LIP TYPE | |
| 27. | 5F-0149 | [2] | SEAL-O-RING | |
| 28. | 7D-8876 | [2] | WASHER-THRUST (65.07X92.08X2.39-MM THK) | |
| 29. | 7D-8877 | [2] | WASHER-THRUST (77.77X107.19X2.39-MM THK) | |
| 30. | 7D-8883 | [2] | SEAL | |
| 31. | 7D-8884 | [2] | SEAL | |
| 32. | 7H-2444 | [2] | SEAL-O-RING | |
| 33. | 198-4778 | [4] | WASHER-HARD (13.5X30X12-MM THK) | |
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
#SEBP50081236
383-2252: LIFT GP-BLADE
For full view, you need register
Parts for your 160K MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7D-8875 | [4] | WASHER-THRUST (2.515X3.62X0.075-IN THK) | |
| 2. | 7D-8878 | [4] | WASHER-THRUST (3.015X4.22X0.075-IN THK) | |
| 3. | 7D-8879 B | [8] | SHIM (0.127-MM THK) | |
| 4. | 7D-8881 B | [6] | SHIM (0.254-MM THK) | |
| 5. | 7D-8882 B | [2] | SHIM (0.508-MM THK) | |
| 6. | 8D-4336 B | [2] | WASHER-THRUST (76.6X146X1.90-MM THK) | |
| 7. | 8X-5106 | [1] | STUD-BALL | |
| 8. | 8X-5107 | [1] | PIN | |
| 9. | 381-0356 | [1] | BAR AS-LINK | |
| 8X-5108 | [2] | BUSHING | ||
| 382-4604 | [7] | BUSHING | ||
| 10. | 123-8187 B | [2] | WASHER-THRUST (76.6X146X1-MM THK) | |
| 11. | 339-1911 M | [6] | BOLT (M20X2.5X125-MM) | |
| 12. | 6V-8197 M | [4] | BOLT (M12X1.75X40-MM) | |
| 13. | 259-4483 | [2] | PIN | |
| 14. | 259-4492 | [2] | LOCK | |
| 15. | 296-3004 | [1] | ARM AS-LIFT (LH) | |
| 7D-8889 | [1] | BEARING (76.35-MM ID) | ||
| 8D-8168 | [1] | BEARING (63.65-MM ID) | ||
| 16. | 296-3005 | [1] | ARM AS-LIFT (RH) | |
| 7D-8889 | [1] | BEARING (76.35-MM ID) | ||
| 8D-8168 | [1] | BEARING (63.65-MM ID) | ||
| 17. | 261-8541 | [2] | YOKE AS | |
| (EACH INCLUDES) | ||||
| 2G-8233 | [1] | RING | ||
| 18. | 261-8543 | [2] | RETAINER | |
| 19. | 261-8545 | [1] | PLATE | |
| 20. | 261-8547 | [2] | LOCK | |
| 21. | 6V-3823 M | [1] | BOLT (M12X1.75X60-MM) | |
| 22. | 8T-0362 M | [4] | BOLT (M20X2.5X110-MM) | |
| 23. | 8T-3282 | [16] | WASHER-HARD (22X35X3.5-MM THK) | |
| 24. | 5P-8245 | [5] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 25. | 6V-7742 M | [6] | NUT-FULL (M20X2.5-THD) | |
| 26. | 3P-1461 | [4] | SEAL-LIP TYPE | |
| 27. | 5F-0149 | [2] | SEAL-O-RING | |
| 28. | 7D-8876 | [2] | WASHER-THRUST (65.07X92.08X2.39-MM THK) | |
| 29. | 7D-8877 | [2] | WASHER-THRUST (77.77X107.19X2.39-MM THK) | |
| 30. | 7D-8883 | [2] | SEAL | |
| 31. | 7D-8884 | [2] | SEAL | |
| 32. | 7H-2444 | [2] | SEAL-O-RING | |
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
#SEBP50081237
383-6377: LIFT GP-BLADE
For full view, you need register
Parts for your 160K MOTOR GRADER:
CATERPILLAR SIS#SEBP50081238
430-5641: LIFT GP-BLADE
For full view, you need register
Parts for your 160K MOTOR GRADER:
CATERPILLAR SIS#SEBP50081239
436-6277: LIFT GP-BLADE
For full view, you need register
Parts for your 160K MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7D-8875 | [4] | WASHER-THRUST (2.515X3.62X0.075-IN THK) | |
| 2. | 7D-8878 | [4] | WASHER-THRUST (3.015X4.22X0.075-IN THK) | |
| 3. | 7D-8879 B | [8] | SHIM (0.127-MM THK) | |
| 4. | 7D-8881 B | [6] | SHIM (0.254-MM THK) | |
| 5. | 7D-8882 B | [2] | SHIM (0.508-MM THK) | |
| 6. | 8D-4336 B | [2] | WASHER-THRUST (76.6X146X1.90-MM THK) | |
| 7. | 8X-5106 | [1] | STUD-BALL | |
| 8. | 8X-5107 | [1] | PIN | |
| 9. | 381-0356 | [1] | BAR AS-LINK | |
| 9A. | 8X-5108 | [2] | BUSHING | |
| 9B. | 382-4604 | [7] | BUSHING | |
| 10. | 123-8187 B | [6] | WASHER-THRUST (76.6X146X1-MM THK) | |
| 11. | 339-1911 M | [6] | BOLT (M20X2.5X125-MM) | |
| 13. | 259-4483 | [2] | PIN | |
| 14. | 259-4492 | [2] | LOCK | |
| 15. | 296-3004 | [1] | ARM AS-LIFT (LH) | |
| 15A. | 7D-8889 | [1] | BEARING (76.35-MM ID) | |
| 15B. | 8D-8168 | [1] | BEARING (63.65-MM ID) | |
| 16. | 296-3005 | [1] | ARM AS-LIFT (RH) | |
| 16A. | 7D-8889 | [1] | BEARING (76.35-MM ID) | |
| 16B. | 8D-8168 | [1] | BEARING (63.65-MM ID) | |
| 17. | 261-8541 | [2] | YOKE AS | |
| (EACH INCLUDES) | ||||
| 2G-8233 | [1] | RING | ||
| 18. | 261-8543 | [2] | RETAINER | |
| 19. | 261-8545 | [1] | PLATE | |
| 20. | 261-8547 | [2] | LOCK | |
| 21. | 6V-3823 M | [1] | BOLT (M12X1.75X60-MM) | |
| 22. | 8T-0362 M | [4] | BOLT (M20X2.5X110-MM) | |
| 23. | 8T-3282 | [16] | WASHER-HARD (22X35X3.5-MM THK) | |
| 24. | 5P-8245 | [1] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 25. | 6V-7742 M | [6] | NUT-FULL (M20X2.5-THD) | |
| 26. | 3P-1461 | [4] | SEAL-LIP TYPE | |
| 27. | 5F-0149 | [2] | SEAL-O-RING | |
| 28. | 7D-8876 | [2] | WASHER-THRUST (65.07X92.08X2.39-MM THK) | |
| 29. | 7D-8877 | [2] | WASHER-THRUST (77.77X107.19X2.39-MM THK) | |
| 30. | 7D-8883 | [2] | SEAL | |
| 31. | 7D-8884 | [2] | SEAL | |
| 32. | 7H-2444 | [2] | SEAL-O-RING | |
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
Information:
Caterpillar Parts SIS Catalog 160K :
Truck sale:
217.656
Caterpillar 160K, motor graders, Construction
- motor graders
ZAHID TRACTOR & HEAVY MACHINERY COMPANY
Saudi Arabia
- motor graders
ZAHID TRACTOR & HEAVY MACHINERY COMPANY
Saudi Arabia
