WORK TOOLS
GROUND ENGAGING TOOLS (G.E.T.)BLADE GP
WORK TOOLS
GROUND ENGAGING TOOLS (G.E.T.)
#SEBP50160740
462-4828: BIT-END
For full view, you need register
Parts for your D6N TRACK-TYPE TRACTOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| (NO SERVICED PARTS) | ||||
#SEBP50160741
462-4829: BIT-END
For full view, you need register
Parts for your D6N TRACK-TYPE TRACTOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| (NO SERVICED PARTS) | ||||
#SEBP50160742
235-5000: BLADE & EDGE GP-ANGLING
235-5000 BLADE & EDGE GP-ANGLING
S/N STS1-UP
Type 1
FOR USE WITH GRADE CONTROL AR, XL
AN ATTACHMENT
S/N STS1-UP
Type 1
FOR USE WITH GRADE CONTROL AR, XL
AN ATTACHMENT
For full view, you need register
Parts for your D6N TRACK-TYPE TRACTOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3B-8489 | [2] | FITTING-GREASE (1/8-27 PTF) | |
| 2. | 3G-8932 | [2] | PIN | |
| 3. | 4T-0231 | [2] | RETAINER | |
| 4. | 8E-9380 Y | [1] | EDGE GP-BIT & CUTTING | |
| 5. | 8G-5747 | [4] | SPACER (45X50X15-MM THK) | |
| 6. | 089-8249 | [4] | SPACER (64X72X13-MM THK) | |
| 7. | 104-4817 | [2] | PIN | |
| 8. | 104-7434 | [2] | RETAINER | |
| 9. | 197-6440 | [1] | BEARING | |
| 10. | 266-9599 C | [1] | RETAINER | |
| 11. | 296-5099 CY | [1] | BLADE AS-ANGLING | |
| 12. | 9X-8271 CM | [8] | BOLT-12 POINT HEAD (M10X1.5X45-MM) | |
| 13. | 7X-2562 M | [4] | BOLT (M20X2.5X45-MM) | |
| 14. | 8T-4223 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 15. | 8T-4956 M | [2] | BOLT (M12X1.75X35-MM) | |
| 8T-7371 F | [1] | PLATE-SERIAL NUMBER (BLADE) | ||
| (ON THE LEFT TOP CORNER OF STRAIGHT VPAT BLADE) | ||||
| 4B-4158 F | [2] | SCREW-DRIVE (NO 4X0.25-IN) | ||
| C | CHANGE FROM PREVIOUS TYPE | |||
| F | NOT SHOWN | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP50160743
235-5000: BLADE & EDGE GP-ANGLING
235-5000 BLADE & EDGE GP-ANGLING
S/N STS1-UP
Type 2
FOR USE WITH GRADE CONTROL AR, XL
AN ATTACHMENT
S/N STS1-UP
Type 2
FOR USE WITH GRADE CONTROL AR, XL
AN ATTACHMENT
For full view, you need register
Parts for your D6N TRACK-TYPE TRACTOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3B-8489 C | [1] | FITTING-GREASE (1/8-27 PTF) | |
| 2. | 3G-8932 | [2] | PIN | |
| 3. | 4T-0231 | [2] | RETAINER | |
| 4. | 8E-9380 Y | [1] | EDGE GP-BIT & CUTTING | |
| 5. | 8G-5747 | [4] | SPACER (45X50X15-MM THK) | |
| 6. | 089-8249 | [4] | SPACER (64X72X13-MM THK) | |
| 7. | 104-4817 | [2] | PIN | |
| 8. | 104-7434 | [2] | RETAINER | |
| 9. | 197-6440 | [1] | BEARING | |
| 10. | 376-6434 | [1] | RETAINER | |
| 11. | 296-5099 Y | [1] | BLADE AS-ANGLING | |
| 12. | 9X-8271 CM | [10] | BOLT-12 POINT HEAD (M10X1.5X45-MM) | |
| 13. | 7X-2562 M | [4] | BOLT (M20X2.5X45-MM) | |
| 14. | 8T-4223 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 15. | 8T-4956 M | [2] | BOLT (M12X1.75X35-MM) | |
| 16. | 2Y-9790 | [1] | PLATE-SERIAL NUMBER (BLADE) | |
| 16A. | 4B-4158 | [2] | SCREW-DRIVE (NO 4X0.25-IN) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP50160744
358-2210: BLADE & EDGE GP-ANGLING
For full view, you need register
Parts for your D6N TRACK-TYPE TRACTOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3B-8489 | [1] | FITTING-GREASE (1/8-27 PTF) | |
| 2. | 4T-0231 | [3] | RETAINER | |
| 3. | 8E-9380 Y | [1] | EDGE GP-BIT & CUTTING | |
| 4. | 9J-4782 | [1] | PROTECTOR | |
| 5. | 089-8249 | [2] | SPACER (64X72X13-MM THK) | |
| 6. | 104-4817 | [1] | PIN | |
| 7. | 223-3279 | [1] | RETAINER | |
| 8. | [1] | PLATE & FILM GP | ||
| 4B-4158 | [2] | SCREW-DRIVE (NO 4X0.25-IN) | ||
| 8T-7371 | [1] | PLATE-SERIAL NUMBER (BLADE) | ||
| 9. | 259-2968 | [6] | SPACER (52.4X57X23-MM THK) | |
| 10. | 348-6260 B | [6] | SHIM (1.5-MM THK) | |
| 11. | [1] | BLADE AS | ||
| 12. | 358-2224 | [1] | BRACKET AS | |
| 13. | 358-2227 | [3] | PIN | |
| 14. | 383-3364 | [2] | CAP-BEARING | |
| 15. | 5P-1076 | [4] | WASHER-HARD (13.5X30X4-MM THK) | |
| 16. | 8T-5878 M | [8] | BOLT (M24X3X80-MM) | |
| 17. | 8T-4123 | [1] | WASHER (22X35X3.5-MM THK) | |
| 18. | 8T-4167 | [8] | WASHER-HARD (26X44X4-MM THK) | |
| 19. | 8T-4183 M | [4] | BOLT (M12X1.75X40-MM) | |
| 20. | 8T-4223 | [3] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 21. | 8T-4956 M | [3] | BOLT (M12X1.75X35-MM) | |
| 22. | 8T-5460 M | [1] | BOLT (M20X2.5X40-MM) | |
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP50160745
358-2210: BLADE & EDGE GP-ANGLING
For full view, you need register
Parts for your D6N TRACK-TYPE TRACTOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3B-8489 | [1] | FITTING-GREASE (1/8-27 PTF) | |
| 2. | 4T-0231 | [3] | RETAINER | |
| 3. | 8E-9380 Y | [1] | EDGE GP-BIT & CUTTING | |
| 4. | 9J-4782 | [1] | PROTECTOR | |
| 5. | 089-8249 | [2] | SPACER (64X72X13-MM THK) | |
| 6. | 104-4817 | [1] | PIN | |
| 7. | 223-3279 | [1] | RETAINER | |
| 8. | [1] | PLATE & FILM GP | ||
| 4B-4158 | [2] | SCREW-DRIVE (NO 4X0.25-IN) | ||
| 8T-7371 | [1] | PLATE-SERIAL NUMBER (BLADE) | ||
| 9. | 259-2968 | [6] | SPACER (52.4X57X23-MM THK) | |
| 10. | 348-6260 B | [6] | SHIM (1.5-MM THK) | |
| 11. | C | [1] | BLADE AS-ANGLING | |
| 11A. | 456-9700 | [1] | BEARING | |
| 12. | 477-0065 C | [1] | PLATE AS | |
| 13. | 358-2227 | [3] | PIN | |
| 14. | 490-1616 | [2] | CAP-BEARING | |
| 15. | 5P-1076 | [4] | WASHER-HARD (13.5X30X4-MM THK) | |
| 16. | 8T-5878 M | [8] | BOLT (M24X3X80-MM) | |
| 17. | 8T-4123 | [1] | WASHER (22X35X3.5-MM THK) | |
| 18. | 8T-4167 | [8] | WASHER-HARD (26X44X4-MM THK) | |
| 19. | 8T-4183 M | [4] | BOLT (M12X1.75X40-MM) | |
| 20. | 8T-4223 | [3] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 21. | 8T-4956 M | [3] | BOLT (M12X1.75X35-MM) | |
| 22. | 8T-5460 M | [1] | BOLT (M20X2.5X40-MM) | |
| 23. | 450-3992 C | [1] | COVER | |
| 24. | 8T-4224 C | [2] | WASHER-HARD (8.8X16X2-MM THK) | |
| 25. | 8T-4189 CM | [2] | BOLT (M8X1.25X20-MM) | |
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP50160746
359-3410: BLADE & EDGE GP-ANGLING
359-3410 BLADE & EDGE GP-ANGLING
S/N NEJ1-UP
PART OF 502-6840 DISTRIBUTION AR
AN ATTACHMENT
S/N NEJ1-UP
PART OF 502-6840 DISTRIBUTION AR
AN ATTACHMENT
For full view, you need register
Parts for your D6N TRACK-TYPE TRACTOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3B-8489 | [1] | FITTING-GREASE (1/8-27 PTF) | |
| 2. | 4T-0231 | [3] | RETAINER | |
| 3. | 4T-2314 Y | [1] | EDGE GP-BIT & CUTTING | |
| 4. | 9J-4782 | [1] | PROTECTOR | |
| 5. | 089-8249 | [2] | SPACER (64X72X13-MM THK) | |
| 6. | 104-4817 | [1] | PIN | |
| 7. | 223-3279 | [1] | RETAINER | |
| 8. | [1] | PLATE & FILM GP | ||
| 4B-4158 | [2] | SCREW-DRIVE (NO 4X0.25-IN) | ||
| 8T-7371 | [1] | PLATE-SERIAL NUMBER (BLADE) | ||
| 9. | 259-2968 | [6] | SPACER (52.4X57X23-MM THK) | |
| 10. | 348-6260 B | [6] | SHIM (1.5-MM THK) | |
| 11. | 477-0065 | [1] | PLATE AS | |
| 12. | 358-2227 | [3] | PIN | |
| 13. | [1] | BLADE AS-ANGLING | ||
| 13A. | 456-9700 | [1] | BEARING | |
| 14. | 490-1616 | [2] | CAP-BEARING | |
| 15. | 5P-1076 | [4] | WASHER-HARD (13.5X30X4-MM THK) | |
| 16. | 8T-5878 M | [8] | BOLT (M24X3X80-MM) | |
| 17. | 8T-4123 | [1] | WASHER (22X35X3.5-MM THK) | |
| 18. | 8T-4167 | [8] | WASHER-HARD (26X44X4-MM THK) | |
| 19. | 8T-4183 M | [4] | BOLT (M12X1.75X40-MM) | |
| 20. | 8T-4223 | [3] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 21. | 8T-4956 M | [3] | BOLT (M12X1.75X35-MM) | |
| 22. | 8T-5460 M | [1] | BOLT (M20X2.5X40-MM) | |
| 23. | 450-3992 | [1] | COVER | |
| 24. | 8T-4224 | [2] | WASHER-HARD (8.8X16X2-MM THK) | |
| 25. | 8T-4189 M | [2] | BOLT (M8X1.25X20-MM) | |
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP50160747
115-4594: BLADE & EDGE GP-SEMI-UNIVERSAL
115-4594 BLADE & EDGE GP-SEMI-UNIVERSAL
S/N S6A1-UP
PART OF 273-0030 BULLDOZER AR-SEMI-UNIVERSAL
CANNOT BE USED WITH GRADE CONTROL AR
AN ATTACHMENT
S/N S6A1-UP
PART OF 273-0030 BULLDOZER AR-SEMI-UNIVERSAL
CANNOT BE USED WITH GRADE CONTROL AR
AN ATTACHMENT
For full view, you need register
#SEBP50160748
296-5099: BLADE AS-ANGLING
296-5099 BLADE AS-ANGLING -LASER APPLICATION
S/N STS1-UP
PART OF 235-5000 BLADE & EDGE GP-ANGLING
AN ATTACHMENT
S/N STS1-UP
PART OF 235-5000 BLADE & EDGE GP-ANGLING
AN ATTACHMENT
For full view, you need register
#SEBP50160749
296-5100: BLADE AS-ANGLING
296-5100 BLADE AS-ANGLING -LASER APPLICATION
S/N STL1-UP
PART OF 235-5001 BLADE GP-ANGLING
AN ATTACHMENT
S/N STL1-UP
PART OF 235-5001 BLADE GP-ANGLING
AN ATTACHMENT
For full view, you need register
