WORK TOOLS
BLADE GPWORK TOOLS
BLADE GP
#SEBP50160750
115-4595: BLADE AS-SEMI-UNIVERSAL
115-4595 BLADE AS-SEMI-UNIVERSAL
S/N S6A1-UP
PART OF 115-4594 BLADE & EDGE GP-SEMI-UNIVERSAL
AN ATTACHMENT
S/N S6A1-UP
PART OF 115-4594 BLADE & EDGE GP-SEMI-UNIVERSAL
AN ATTACHMENT
For full view, you need register
Parts for your D6N TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1U-0183 | [2] | DEFLECTOR | |
| 2. | 6I-9420 | [2] | BRACKET AS | |
| (EACH INCLUDES) | ||||
| 2A. | 7J-5131 | [1] | TRUNNION | |
| 3. | 6I-9461 | [1] | PLATE (LH) | |
| 4. | 6I-9462 | [1] | PLATE (RH) | |
| 5. | 8E-5192 | [2] | BRACKET AS | |
| (EACH INCLUDES) | ||||
| 5A. | 4J-1641 | [1] | TRUNNION | |
| 6. | 8E-5194 | [1] | BRACKET | |
| 7. | 8P-9770 | [1] | PLATE | |
| 8. | 9U-8506 | [2] | BRACKET AS | |
| (EACH INCLUDES) | ||||
| 8A. | 4T-1504 | [1] | TRUNNION | |
| 9. | 9W-6381 | [1] | PLATE | |
| 10. | 9R-3572 M | [3] | BOSS (M12X1.75X20-MM) | |
| M | METRIC PART | |||
#SEBP50160751
137-8729: BLADE GP-ANGLING
137-8729 BLADE GP-ANGLING
S/N ECF1-1065
FOR USE WITH FINE GRADING, GRADE CONTROL AR
AN ATTACHMENT
S/N ECF1-1065
FOR USE WITH FINE GRADING, GRADE CONTROL AR
AN ATTACHMENT
For full view, you need register
Parts for your D6N TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 296-9397 C | [1] | BLADE AS-ANGLING | |
| 1A. | 240-1557 | [1] | BRACKET AS | |
| 1B. | 250-5481 | [2] | BRACKET AS | |
| 1C. | 250-5482 | [1] | BRACKET AS | |
| 1D. | 8P-9770 | [1] | PLATE (BLADE) | |
| 1E. | 110-5228 | [1] | BRACKET AS (TILT CYLINDER) | |
| 1F. | 112-9060 | [1] | BRACKET AS | |
| 1G. | 296-9398 | [1] | BRACKET AS | |
| 2. | 104-4817 | [2] | PIN | |
| 3. | 7X-2562 M | [4] | BOLT (M20X2.5X45-MM) | |
| 4. | 104-7434 | [2] | RETAINER | |
| 5. | 3G-8932 | [2] | PIN | |
| 6. | 4T-0231 | [2] | RETAINER | |
| 7. | 8T-4956 M | [2] | BOLT (M12X1.75X35-MM) | |
| 8. | 8T-4223 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 9. | 134-2733 | [1] | BEARING-SELF-ALIGNING | |
| 10. | 266-9599 C | [1] | RETAINER | |
| 11. | 3B-8489 | [2] | FITTING-GREASE (1/8-27 PTF) | |
| 12. | 8G-5747 | [4] | SPACER (45X50X15-MM THK) | |
| 13. | 089-8249 | [4] | SPACER (64X72X13-MM THK) | |
| 14. | 4T-2314 Y | [1] | EDGE GP-BIT & CUTTING | |
| 15. | 9X-8271 CM | [8] | BOLT-12 POINT HEAD (M10X1.5X45-MM) | |
| 8T-7371 F | [1] | PLATE-SERIAL NUMBER (BLADE) | ||
| (ON THE LEFT TOP CORNER OF STRAIGHT VPAT BLADE) | ||||
| 4B-4158 F | [2] | SCREW-DRIVE (NO 4X0.25-IN) | ||
| C | CHANGE FROM PREVIOUS TYPE | |||
| F | NOT SHOWN | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP50160752
137-8729: BLADE GP-ANGLING
137-8729 BLADE GP-ANGLING
S/N ECF1066-UP
FOR USE WITH FINE GRADING, GRADE CONTROL AR
AN ATTACHMENT
S/N ECF1066-UP
FOR USE WITH FINE GRADING, GRADE CONTROL AR
AN ATTACHMENT
For full view, you need register
Parts for your D6N TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 296-9397 | [1] | BLADE AS-ANGLING | |
| 1A. | 240-1557 | [1] | BRACKET AS | |
| 1B. | 250-5481 | [2] | BRACKET AS | |
| 1C. | 250-5482 | [1] | BRACKET AS | |
| 1D. | 8P-9770 | [1] | PLATE (BLADE) | |
| 1E. | 110-5228 | [1] | BRACKET AS (TILT CYLINDER) | |
| 1F. | 112-9060 | [1] | BRACKET AS | |
| 1G. | 296-9398 | [1] | BRACKET AS | |
| 2. | 104-4817 | [2] | PIN | |
| 3. | 7X-2562 M | [4] | BOLT (M20X2.5X45-MM) | |
| 4. | 104-7434 | [2] | RETAINER | |
| 5. | 3G-8932 | [2] | PIN | |
| 6. | 4T-0231 | [2] | RETAINER | |
| 7. | 8T-4956 M | [2] | BOLT (M12X1.75X35-MM) | |
| 8. | 8T-4223 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 9. | 134-2733 | [1] | BEARING-SELF-ALIGNING | |
| 10. | 376-6434 C | [1] | RETAINER | |
| 11. | 3B-8489 | [2] | FITTING-GREASE (1/8-27 PTF) | |
| 12. | 8G-5747 | [4] | SPACER (45X50X15-MM THK) | |
| 13. | 089-8249 | [4] | SPACER (64X72X13-MM THK) | |
| 14. | 4T-2314 Y | [1] | EDGE GP-BIT & CUTTING | |
| 15. | 9X-8271 M | [10] | BOLT-12 POINT HEAD (M10X1.5X45-MM) | |
| 8T-7371 F | [1] | PLATE-SERIAL NUMBER (BLADE) | ||
| (ON THE LEFT TOP CORNER OF STRAIGHT VPAT BLADE) | ||||
| 4B-4158 F | [2] | SCREW-DRIVE (NO 4X0.25-IN) | ||
| C | CHANGE FROM PREVIOUS TYPE | |||
| F | NOT SHOWN | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP50160753
235-5001: BLADE GP-ANGLING
235-5001 BLADE GP-ANGLING -LASER APPLICATION
S/N STL1-1065
FOR USE WITH GRADE CONTROL AR, LGP
CANNOT BE USED WITH FINE GRADING AR
AN ATTACHMENT
S/N STL1-1065
FOR USE WITH GRADE CONTROL AR, LGP
CANNOT BE USED WITH FINE GRADING AR
AN ATTACHMENT
For full view, you need register
Parts for your D6N TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3B-8489 | [2] | FITTING-GREASE (1/8-27 PTF) | |
| 2. | 3G-8932 | [2] | PIN | |
| 3. | 4T-0231 | [2] | RETAINER | |
| 4. | 4T-2314 Y | [1] | EDGE GP-BIT & CUTTING | |
| 5. | 8G-5747 | [4] | SPACER (45X50X15-MM THK) | |
| 6. | 089-8249 | [4] | SPACER (64X72X13-MM THK) | |
| 7. | 104-4817 | [2] | PIN | |
| 8. | 104-7434 | [2] | RETAINER | |
| 9. | 197-6440 | [1] | BEARING | |
| 10. | 266-9599 C | [1] | RETAINER | |
| 11. | 296-5100 CY | [1] | BLADE AS-ANGLING | |
| 12. | 9X-8271 CM | [8] | BOLT-12 POINT HEAD (M10X1.5X45-MM) | |
| 13. | 7X-2562 M | [4] | BOLT (M20X2.5X45-MM) | |
| 14. | 8T-4223 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 15. | 8T-4956 M | [2] | BOLT (M12X1.75X35-MM) | |
| 8T-7371 F | [1] | PLATE-SERIAL NUMBER (BLADE) | ||
| (ON THE LEFT TOP CORNER OF STRAIGHT VPAT BLADE) | ||||
| 4B-4158 F | [2] | SCREW-DRIVE (NO 4X0.25-IN) | ||
| C | CHANGE FROM PREVIOUS TYPE | |||
| F | NOT SHOWN | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP50160754
235-5001: BLADE GP-ANGLING
235-5001 BLADE GP-ANGLING -LASER APPLICATION
S/N STL1066-UP
FOR USE WITH GRADE CONTROL AR, LGP
CANNOT BE USED WITH FINE GRADING AR
AN ATTACHMENT
S/N STL1066-UP
FOR USE WITH GRADE CONTROL AR, LGP
CANNOT BE USED WITH FINE GRADING AR
AN ATTACHMENT
For full view, you need register
Parts for your D6N TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3B-8489 C | [1] | FITTING-GREASE (1/8-27 PTF) | |
| 2. | 3G-8932 | [2] | PIN | |
| 3. | 4T-0231 | [2] | RETAINER | |
| 4. | 4T-2314 Y | [1] | EDGE GP-BIT & CUTTING | |
| 5. | 8G-5747 | [4] | SPACER (45X50X15-MM THK) | |
| 6. | 089-8249 | [4] | SPACER (64X72X13-MM THK) | |
| 7. | 104-4817 | [2] | PIN | |
| 8. | 104-7434 | [2] | RETAINER | |
| 9. | 197-6440 | [1] | BEARING | |
| 10. | 376-6434 C | [1] | RETAINER | |
| 11. | 296-5100 Y | [1] | BLADE AS-ANGLING | |
| 12. | 9X-8271 CM | [10] | BOLT-12 POINT HEAD (M10X1.5X45-MM) | |
| 13. | 7X-2562 M | [4] | BOLT (M20X2.5X45-MM) | |
| 14. | 8T-4223 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 15. | 8T-4956 M | [2] | BOLT (M12X1.75X35-MM) | |
| 8T-7371 F | [1] | PLATE-SERIAL NUMBER (BLADE) | ||
| (ON THE LEFT TOP CORNER OF STRAIGHT VPAT BLADE) | ||||
| 4B-4158 F | [2] | SCREW-DRIVE (NO 4X0.25-IN) | ||
| C | CHANGE FROM PREVIOUS TYPE | |||
| F | NOT SHOWN | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP50160755
257-0201: BLADE GP-ANGLING
257-0201 BLADE GP-ANGLING -LASER APPLICATION
S/N ECC1-UP
FOLDABLE
PART OF 257-0210 BLADE GP-ANGLING
AN ATTACHMENT
S/N ECC1-UP
FOLDABLE
PART OF 257-0210 BLADE GP-ANGLING
AN ATTACHMENT
For full view, you need register
Parts for your D6N TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8D-3791 | [4] | PIN | |
| 2. | 8V-7659 | [2] | PIN AS | |
| 3. | 257-0203 | [1] | BLADE AS (LH) | |
| 4. | 257-0204 | [1] | SUPPORT-ARM | |
| 5. | 257-0205 | [2] | PIN-DOWEL | |
| 6. | 296-9833 C | [1] | BLADE AS (RH) | |
| 7. | 5P-1076 | [2] | WASHER-HARD (13.5X30X4-MM THK) | |
| 8. | 7G-8839 | [2] | SPACER (13.5X57X6-MM THK) | |
| 9. | 8T-4183 M | [2] | BOLT (M12X1.75X40-MM) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
#SEBP50160756
257-0210: BLADE GP-ANGLING
257-0210 BLADE GP-ANGLING
S/N ECC1-535
FOLDABLE
FOR USE WITH GRADE CONTROL AR, XL
AN ATTACHMENT
S/N ECC1-535
FOLDABLE
FOR USE WITH GRADE CONTROL AR, XL
AN ATTACHMENT
For full view, you need register
Parts for your D6N TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3B-8489 | [2] | FITTING-GREASE (1/8-27 PTF) | |
| 2. | 3G-8932 | [2] | PIN | |
| 3. | 4T-0231 | [2] | RETAINER | |
| 4. | 8G-5747 | [4] | SPACER (45X50X15-MM THK) | |
| 5. | 089-8249 | [4] | SPACER (64X72X13-MM THK) | |
| 6. | 104-4817 | [2] | PIN | |
| 7. | 104-7434 | [2] | RETAINER | |
| 8. | 197-6440 | [1] | BEARING | |
| 9. | 257-0201 Y | [1] | BLADE GP-ANGLING | |
| 10. | 257-0207 Y | [1] | EDGE GP-BIT & CUTTING (ANGLING) | |
| 11. | 266-9599 | [1] | RETAINER | |
| 12. | 9X-8271 M | [8] | BOLT-12 POINT HEAD (M10X1.5X45-MM) | |
| 13. | 7X-2562 M | [4] | BOLT (M20X2.5X45-MM) | |
| 14. | 8T-4223 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 15. | 8T-4956 M | [2] | BOLT (M12X1.75X35-MM) | |
| 16. | 8T-7371 | [1] | PLATE-SERIAL NUMBER (BLADE) | |
| 16A. | 4B-4158 | [2] | SCREW-DRIVE (NO 4X0.25-IN) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP50160757
257-0210: BLADE GP-ANGLING
257-0210 BLADE GP-ANGLING
S/N ECC536-UP
FOLDABLE
FOR USE WITH GRADE CONTROL AR, XL
AN ATTACHMENT
S/N ECC536-UP
FOLDABLE
FOR USE WITH GRADE CONTROL AR, XL
AN ATTACHMENT
For full view, you need register
Parts for your D6N TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3B-8489 C | [1] | FITTING-GREASE (1/8-27 PTF) | |
| 2. | 3G-8932 | [2] | PIN | |
| 3. | 4T-0231 | [2] | RETAINER | |
| 4. | 8G-5747 | [4] | SPACER (45X50X15-MM THK) | |
| 5. | 089-8249 | [4] | SPACER (64X72X13-MM THK) | |
| 6. | 104-4817 | [2] | PIN | |
| 7. | 104-7434 | [2] | RETAINER | |
| 8. | 197-6440 | [1] | BEARING | |
| 9. | 257-0201 Y | [1] | BLADE GP-ANGLING | |
| 10. | 257-0207 Y | [1] | EDGE GP-BIT & CUTTING (ANGLING) | |
| 11. | 376-6434 C | [1] | RETAINER | |
| 12. | 9X-8271 CM | [10] | BOLT-12 POINT HEAD (M10X1.5X45-MM) | |
| 13. | 7X-2562 M | [4] | BOLT (M20X2.5X45-MM) | |
| 14. | 8T-4223 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 15. | 8T-4956 M | [2] | BOLT (M12X1.75X35-MM) | |
| 16. | 8T-7371 | [1] | PLATE-SERIAL NUMBER (BLADE) | |
| 16A. | 4B-4158 | [2] | SCREW-DRIVE (NO 4X0.25-IN) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP50160758
257-8113: BLADE GP-ANGLING
257-8113 BLADE GP-ANGLING
S/N ECD1-UP
FOLDABLE
PART OF 345-7446 BLADE GP-ANGLING
FOR USE WITH GRADE CONTROL
AN ATTACHMENT
S/N ECD1-UP
FOLDABLE
PART OF 345-7446 BLADE GP-ANGLING
FOR USE WITH GRADE CONTROL
AN ATTACHMENT
For full view, you need register
Parts for your D6N TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4T-0231 | [2] | RETAINER | |
| 2. | 8V-7659 | [2] | PIN AS | |
| 3. | 8D-3791 | [4] | PIN | |
| 4. | 257-0205 | [2] | PIN-DOWEL | |
| 5. | 296-9832 C | [1] | BLADE AS (RH) | |
| 6. | 257-8115 | [1] | BLADE AS (LH) | |
| 7. | 257-8140 | [1] | SUPPORT AS-BLADE | |
| 8. | 265-5600 | [2] | LINK AS | |
| 9. | 265-5601 | [2] | PIN | |
| 10. | 5P-1076 | [2] | WASHER-HARD (13.5X30X4-MM THK) | |
| 11. | 7G-8839 | [2] | SPACER (13.5X57X6-MM THK) | |
| 12. | 8T-4183 M | [2] | BOLT (M12X1.75X40-MM) | |
| 13. | 8T-4223 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 14. | 8T-4956 M | [2] | BOLT (M12X1.75X35-MM) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
#SEBP50160759
257-8135: BLADE GP-ANGLING
257-8135 BLADE GP-ANGLING
S/N ECE1-UP
FOLDABLE
Type 1
FOR USE WITH FINE GRADING AR, GRADE CONTROL AR
AN ATTACHMENT
S/N ECE1-UP
FOLDABLE
Type 1
FOR USE WITH FINE GRADING AR, GRADE CONTROL AR
AN ATTACHMENT
For full view, you need register
Parts for your D6N TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8G-7703 | [2] | BODY-VALVE | |
| 2. | 8G-7707 | [2] | ORIFICE | |
| 3. | 335-3861 I | [2] | HOSE AS | |
| 4. | 345-7445 Y | [1] | BLADE GP-ANGLING (FOLDABLE) | |
| 5. | 326-0307 | [2] | CONNECTOR AS | |
| (EACH INCLUDES) | ||||
| 326-0306 | [1] | CONNECTOR | ||
| 7J-9108 | [1] | SEAL-O-RING | ||
| 7M-8485 | [1] | SEAL-O-RING | ||
| 6. | 3D-2824 | [2] | SEAL-O-RING | |
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| Y | SEPARATE ILLUSTRATION | |||
