WORK TOOLS
BLADE GPWORK TOOLS
BLADE GP
#SEBP50160760
257-8135: BLADE GP-ANGLING
257-8135 BLADE GP-ANGLING
S/N ECE1-UP
FOLDABLE
Type 2
FOR USE WITH FINE GRADING AR, GRADE CONTROL AR
AN ATTACHMENT
S/N ECE1-UP
FOLDABLE
Type 2
FOR USE WITH FINE GRADING AR, GRADE CONTROL AR
AN ATTACHMENT
For full view, you need register
Parts for your D6N TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 345-7445 Y | [1] | BLADE GP-ANGLING (FOLDABLE) | |
| Y | SEPARATE ILLUSTRATION | |||
#SEBP50160761
257-8155: BLADE GP-ANGLING
257-8155 BLADE GP-ANGLING
S/N ECD1-UP
FOLDABLE
Type 1
FOR USE WITH FINE GRADING AR, GRADE CONTROL AR, LGP
AN ATTACHMENT
S/N ECD1-UP
FOLDABLE
Type 1
FOR USE WITH FINE GRADING AR, GRADE CONTROL AR, LGP
AN ATTACHMENT
For full view, you need register
Parts for your D6N TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8G-7703 | [2] | BODY-VALVE | |
| 2. | 8G-7707 | [2] | ORIFICE | |
| 3. | 335-3861 I | [2] | HOSE AS | |
| 4. | 345-7446 Y | [1] | BLADE GP-ANGLING | |
| 5. | 326-0307 | [2] | CONNECTOR AS | |
| (EACH INCLUDES) | ||||
| 326-0306 | [1] | CONNECTOR | ||
| 7J-9108 | [1] | SEAL-O-RING | ||
| 7M-8485 | [1] | SEAL-O-RING | ||
| 6. | 3D-2824 | [2] | SEAL-O-RING | |
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP50160762
257-8155: BLADE GP-ANGLING
257-8155 BLADE GP-ANGLING
S/N ECD1-UP
FOLDABLE
Type 2
FOR USE WITH FINE GRADING AR, GRADE CONTROL AR, LGP
AN ATTACHMENT
S/N ECD1-UP
FOLDABLE
Type 2
FOR USE WITH FINE GRADING AR, GRADE CONTROL AR, LGP
AN ATTACHMENT
For full view, you need register
Parts for your D6N TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 345-7446 Y | [1] | BLADE GP-ANGLING | |
| Y | SEPARATE ILLUSTRATION | |||
#SEBP50160763
257-8156: BLADE GP-ANGLING
257-8156 BLADE GP-ANGLING
S/N ECE1-UP
FOLDABLE
PART OF 345-7445 BLADE GP-ANGLING
AN ATTACHMENT
S/N ECE1-UP
FOLDABLE
PART OF 345-7445 BLADE GP-ANGLING
AN ATTACHMENT
For full view, you need register
Parts for your D6N TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4T-0231 | [2] | RETAINER | |
| 2. | 8V-7659 | [2] | PIN AS | |
| 3. | 8D-3791 | [4] | PIN | |
| 4. | 257-0205 | [2] | PIN-DOWEL | |
| 5. | 257-8115 | [1] | BLADE AS (LH) | |
| 6. | 257-8140 | [1] | SUPPORT AS-BLADE | |
| 7. | 296-9831 C | [1] | BLADE AS (RH) | |
| 8. | 265-2696 | [2] | LINK AS | |
| 9. | 265-5601 | [2] | PIN | |
| 10. | 5P-1076 | [2] | WASHER-HARD (13.5X30X4-MM THK) | |
| 11. | 7G-8839 | [2] | SPACER (13.5X57X6-MM THK) | |
| 12. | 8T-4183 M | [2] | BOLT (M12X1.75X40-MM) | |
| 13. | 8T-4223 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 14. | 8T-4956 M | [2] | BOLT (M12X1.75X35-MM) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
#SEBP50160764
345-7445: BLADE GP-ANGLING
345-7445 BLADE GP-ANGLING
S/N ECE1-1065
FOLDABLE
PART OF 257-8135 BLADE GP-ANGLING
AN ATTACHMENT
S/N ECE1-1065
FOLDABLE
PART OF 257-8135 BLADE GP-ANGLING
AN ATTACHMENT
For full view, you need register
Parts for your D6N TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3B-8489 | [4] | FITTING-GREASE (1/8-27 PTF) | |
| 2. | 3G-8932 | [4] | PIN | |
| 3. | 4T-0231 | [4] | RETAINER | |
| 4. | 8G-5747 | [4] | SPACER (45X50X15-MM THK) | |
| 5. | 089-8249 | [4] | SPACER (64X72X13-MM THK) | |
| 6. | 104-4817 | [2] | PIN | |
| 7. | 104-7434 | [2] | RETAINER | |
| 8. | 197-6440 | [1] | BEARING | |
| 9. | [1] | PLATE & FILM GP | ||
| 4B-4158 | [2] | SCREW-DRIVE (NO 4X0.25-IN) | ||
| 8T-7371 | [1] | PLATE-SERIAL NUMBER (BLADE) | ||
| 10. | 257-8150 Y | [1] | EDGE GP-BIT & CUTTING | |
| 11. | 257-8156 Y | [1] | BLADE GP-ANGLING | |
| 12. | 266-9599 | [1] | RETAINER | |
| 13. | 7X-2562 M | [4] | BOLT (M20X2.5X45-MM) | |
| 14. | 8T-4223 | [4] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 15. | 8T-4956 M | [4] | BOLT (M12X1.75X35-MM) | |
| 16. | 9X-8271 M | [8] | BOLT-12 POINT HEAD (M10X1.5X45-MM) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP50160765
345-7445: BLADE GP-ANGLING
345-7445 BLADE GP-ANGLING
S/N ECE1066-UP
FOLDABLE
PART OF 257-8135 BLADE GP-ANGLING
AN ATTACHMENT
S/N ECE1066-UP
FOLDABLE
PART OF 257-8135 BLADE GP-ANGLING
AN ATTACHMENT
For full view, you need register
Parts for your D6N TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3B-8489 C | [3] | FITTING-GREASE (1/8-27 PTF) | |
| 2. | 3G-8932 | [4] | PIN | |
| 3. | 4T-0231 | [4] | RETAINER | |
| 4. | 8G-5747 | [4] | SPACER (45X50X15-MM THK) | |
| 5. | 089-8249 | [4] | SPACER (64X72X13-MM THK) | |
| 6. | 104-4817 | [2] | PIN | |
| 7. | 104-7434 | [2] | RETAINER | |
| 8. | 197-6440 | [1] | BEARING | |
| 9. | [1] | PLATE & FILM GP | ||
| 4B-4158 | [2] | SCREW-DRIVE (NO 4X0.25-IN) | ||
| 8T-7371 | [1] | PLATE-SERIAL NUMBER (BLADE) | ||
| 10. | 257-8150 Y | [1] | EDGE GP-BIT & CUTTING | |
| 11. | 257-8156 Y | [1] | BLADE GP-ANGLING | |
| 12. | 376-6434 C | [1] | RETAINER | |
| 13. | 7X-2562 M | [4] | BOLT (M20X2.5X45-MM) | |
| 14. | 8T-4223 | [4] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 15. | 8T-4956 M | [4] | BOLT (M12X1.75X35-MM) | |
| 16. | 9X-8271 CM | [10] | BOLT-12 POINT HEAD (M10X1.5X45-MM) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP50160766
345-7446: BLADE GP-ANGLING
345-7446 BLADE GP-ANGLING
S/N ECD1-1065
PART OF 257-8155 BLADE GP-ANGLING
AN ATTACHMENT
S/N ECD1-1065
PART OF 257-8155 BLADE GP-ANGLING
AN ATTACHMENT
For full view, you need register
Parts for your D6N TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3B-8489 | [4] | FITTING-GREASE (1/8-27 PTF) | |
| 2. | 3G-8932 | [4] | PIN | |
| 3. | 4T-0231 | [4] | RETAINER | |
| 4. | 8G-5747 | [4] | SPACER (45X50X15-MM THK) | |
| 5. | 089-8249 | [4] | SPACER (64X72X13-MM THK) | |
| 6. | 104-4817 | [2] | PIN | |
| 7. | 104-7434 | [2] | RETAINER | |
| 8. | 197-6440 | [1] | BEARING | |
| 9. | [1] | PLATE & FILM GP | ||
| 4B-4158 | [2] | SCREW-DRIVE (NO 4X0.25-IN) | ||
| 8T-7371 | [1] | PLATE-SERIAL NUMBER (BLADE) | ||
| 10. | 257-8150 Y | [1] | EDGE GP-BIT & CUTTING | |
| 11. | 257-8113 Y | [1] | BLADE GP-ANGLING | |
| 12. | 266-9599 | [1] | RETAINER | |
| 13. | 7X-2562 M | [4] | BOLT (M20X2.5X45-MM) | |
| 14. | 8T-4223 | [4] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 15. | 8T-4956 M | [4] | BOLT (M12X1.75X35-MM) | |
| 16. | 9X-8271 M | [8] | BOLT-12 POINT HEAD (M10X1.5X45-MM) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP50160767
345-7446: BLADE GP-ANGLING
345-7446 BLADE GP-ANGLING
S/N ECD1066-UP
PART OF 257-8155 BLADE GP-ANGLING
AN ATTACHMENT
S/N ECD1066-UP
PART OF 257-8155 BLADE GP-ANGLING
AN ATTACHMENT
For full view, you need register
Parts for your D6N TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3B-8489 C | [3] | FITTING-GREASE (1/8-27 PTF) | |
| 2. | 3G-8932 | [4] | PIN | |
| 3. | 4T-0231 | [4] | RETAINER | |
| 4. | 8G-5747 | [4] | SPACER (45X50X15-MM THK) | |
| 5. | 089-8249 | [4] | SPACER (64X72X13-MM THK) | |
| 6. | 104-4817 | [2] | PIN | |
| 7. | 104-7434 | [2] | RETAINER | |
| 8. | 197-6440 | [1] | BEARING | |
| 9. | [1] | PLATE & FILM GP | ||
| 4B-4158 | [2] | SCREW-DRIVE (NO 4X0.25-IN) | ||
| 8T-7371 | [1] | PLATE-SERIAL NUMBER (BLADE) | ||
| 10. | 257-8150 Y | [1] | EDGE GP-BIT & CUTTING | |
| 11. | 257-8113 Y | [1] | BLADE GP-ANGLING | |
| 12. | 376-6434 C | [1] | RETAINER | |
| 13. | 7X-2562 M | [4] | BOLT (M20X2.5X45-MM) | |
| 14. | 8T-4223 | [4] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 15. | 8T-4956 M | [4] | BOLT (M12X1.75X35-MM) | |
| 16. | 9X-8271 CM | [10] | BOLT-12 POINT HEAD (M10X1.5X45-MM) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP50160768
358-2259: BLADE GP-ANGLING
358-2259 BLADE GP-ANGLING
S/N YAA1-UP
Type 1
FOR USE WITH C-FRAME GP-POWER ANGLING
CANNOT BE USED WITH SEMI-UNIVERSAL BULLDOZER
AN ATTACHMENT
S/N YAA1-UP
Type 1
FOR USE WITH C-FRAME GP-POWER ANGLING
CANNOT BE USED WITH SEMI-UNIVERSAL BULLDOZER
AN ATTACHMENT
For full view, you need register
Parts for your D6N TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4T-0231 | [3] | RETAINER | |
| 2. | 8D-3791 | [3] | PIN | |
| 3. | 9J-4782 | [3] | PROTECTOR | |
| 4. | 089-8249 | [2] | SPACER (64X72X13-MM THK) | |
| 5. | 104-4817 | [1] | PIN | |
| 6. | 223-3279 | [1] | RETAINER | |
| 7. | [1] | PLATE & FILM GP | ||
| 4B-4158 | [2] | SCREW-DRIVE (NO 4X0.25-IN) | ||
| 8T-7371 | [1] | PLATE-SERIAL NUMBER (BLADE) | ||
| (ON RH CORNER OF VPAT FOLDABLE BLADE) | ||||
| 8. | 257-0205 | [2] | PIN-DOWEL | |
| 9. | 257-0207 Y | [1] | EDGE GP-BIT & CUTTING (ANGLING) | |
| 10. | 259-2968 | [6] | SPACER (52.4X57X23-MM THK) | |
| 11. | 266-4761 | [2] | PIN AS | |
| 12. | 348-6260 B | [6] | SHIM (1.5-MM THK) | |
| 13. | 358-2224 | [1] | BRACKET AS | |
| 14. | 358-2227 | [3] | PIN | |
| 15. | 383-3376 | [1] | ARM AS-SUPPORT | |
| 16. | 434-7447 | [1] | BLADE AS (RH) | |
| 17. | [1] | BLADE AS (LH) | ||
| 18. | 383-3364 | [2] | CAP-BEARING | |
| 19. | 3B-8489 | [3] | FITTING-GREASE (1/8-27 PTF) | |
| 20. | 5P-1076 | [4] | WASHER-HARD (13.5X30X4-MM THK) | |
| 21. | 8T-4222 | [2] | WASHER-PLATED (11X32X2.5-MM THK) | |
| 22. | 8T-4123 | [1] | WASHER (22X35X3.5-MM THK) | |
| 23. | 8T-4137 M | [2] | BOLT (M10X1.5X20-MM) | |
| 24. | 8T-4167 | [8] | WASHER-HARD (26X44X4-MM THK) | |
| 25. | 8T-4183 M | [4] | BOLT (M12X1.75X40-MM) | |
| 26. | 8T-4223 | [3] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 27. | 8T-4956 M | [3] | BOLT (M12X1.75X35-MM) | |
| 28. | 8T-5460 M | [1] | BOLT (M20X2.5X40-MM) | |
| 29. | 8T-5878 M | [8] | BOLT (M24X3X80-MM) | |
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP50160769
358-2259: BLADE GP-ANGLING
358-2259 BLADE GP-ANGLING
S/N YAA1-UP
Type 2
FOR USE WITH C-FRAME GP-POWER ANGLING
CANNOT BE USED WITH SEMI-UNIVERSAL BULLDOZER
AN ATTACHMENT
S/N YAA1-UP
Type 2
FOR USE WITH C-FRAME GP-POWER ANGLING
CANNOT BE USED WITH SEMI-UNIVERSAL BULLDOZER
AN ATTACHMENT
For full view, you need register
Parts for your D6N TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3B-8489 | [3] | FITTING-GREASE (1/8-27 PTF) | |
| 2. | 4T-0231 | [3] | RETAINER | |
| 3. | 089-8249 | [2] | SPACER (64X72X13-MM THK) | |
| 4. | 104-4817 | [1] | PIN | |
| 5. | 223-3279 | [1] | RETAINER | |
| 6. | [1] | PLATE & FILM GP | ||
| 8T-7371 | [1] | PLATE-SERIAL NUMBER | ||
| 4B-4158 | [2] | SCREW-DRIVE (NO 4X0.25-IN) | ||
| 7. | 257-0207 Y | [1] | EDGE GP-BIT & CUTTING (ANGLING) | |
| 8. | 266-4761 | [2] | PIN AS | |
| 9. | 358-2227 | [3] | PIN | |
| 10. | 383-3376 | [1] | ARM AS-SUPPORT | |
| 11. | 437-9738 C | [2] | DOWEL AS | |
| 12. | 450-3992 C | [1] | COVER | |
| 13. | C | [1] | BLADE AS (RH) | |
| 13A. | 456-9700 | [1] | BEARING | |
| 15. | 466-2917 C | [6] | SPACER (51.2X57X23-MM THK) | |
| 16. | 477-0065 C | [1] | PLATE AS | |
| 17. | 490-1616 | [2] | CAP-BEARING | |
| 18. | 2U-9234 C | [2] | BUSHING | |
| 19. | 5P-1076 | [4] | WASHER-HARD (13.5X30X4-MM THK) | |
| 20. | 7D-1649 C | [2] | WASHER-HARD (13.5X32X5-MM THK) | |
| 21. | 8D-3791 | [3] | PIN | |
| 22. | 8T-4123 | [1] | WASHER (22X35X3.5-MM THK) | |
| 23. | 8T-4167 | [8] | WASHER-HARD (26X44X4-MM THK) | |
| 24. | 8T-4183 CM | [6] | BOLT (M12X1.75X40-MM) | |
| 25. | 8T-4189 CM | [2] | BOLT (M8X1.25X20-MM) | |
| 26. | 8T-4223 | [3] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 27. | 8T-4224 C | [2] | WASHER-HARD (8.8X16X2-MM THK) | |
| 28. | 8T-4956 M | [3] | BOLT (M12X1.75X35-MM) | |
| 29. | 8T-5460 M | [1] | BOLT (M20X2.5X40-MM) | |
| 30. | 8T-5878 M | [8] | BOLT (M24X3X80-MM) | |
| 31. | 9J-4782 | [3] | PROTECTOR | |
| 32. | 348-6260 BC | [6] | SHIM (1.5-MM THK) | |
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
