AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

359-3349 BLADE GP-ANGLING S/N YAC1-UP Type 1 AN ATTACHMENT D6N TRACK-TYPE TRACTOR


WORK TOOLS
BLADE GP
GROUND ENGAGING TOOLS (G.E.T.)

TRACK-TYPE TRACTOR D6N TRACK-TYPE TRACTOR GHS
 D6N XL, LGP Differential Steering, Electrohydraulic Implement TRACK-TYPE TRACTOR GHS00001-UP (MACHINE) POWERED BY C6.6 Engine SEBP5016 D6N GHS   (2009)

WORK TOOLS

BLADE GP
BLADE GP-ANGLING
358-2259 BLADE GP-ANGLING
BLADE GP-ANGLING
358-2259 BLADE GP-ANGLING
BLADE GP-ANGLING
359-3349 BLADE GP-ANGLING
BLADE GP-ANGLING
359-3349 BLADE GP-ANGLING
SHIM GP-SPECIAL
498-6447 SHIM GP-SPECIAL
 

#SEBP50160770
 

359-3349: BLADE GP-ANGLING

359-3349 BLADE GP-ANGLING
S/N YAC1-UP
Type 1
AN ATTACHMENT
i04606733 SEBP5016
3593349 BLADE GP-ANGLING Parts scheme
  For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [3] FITTING-GREASE (1/8-27 PTF)  
2. 4T-0231 [5] RETAINER  
3. 8D-3791 [3] PIN  
4. 9J-4782 [3] PROTECTOR  
5. 089-8249 [2] SPACER (64X72X13-MM THK)  
6. 104-4817 [1] PIN  
7. 177-4548 [1] PIN  
8. 223-3279 [1] RETAINER  
9. [1] PLATE & FILM GP  
  4B-4158 [2] SCREW-DRIVE (NO 4X0.25-IN)  
  8T-7371 [1] PLATE-SERIAL NUMBER (BLADE)  
10. 257-0205 [2] PIN-DOWEL  
11. 257-8150 Y [1] EDGE GP-BIT & CUTTING  
12. 259-2968 [6] SPACER (52.4X57X23-MM THK)  
13. 266-4761 [2] PIN AS  
14. 348-6260 B [6] SHIM (1.5-MM THK)  
15. 358-2224 [1] BRACKET AS  
16. 358-2227 [3] PIN  
17. 358-2260 [1] ARM AS-SUPPORT  
18. 358-2270 [1] BRACKET AS  
19. 370-5549 [1] PIN  
20. [1] BLADE AS (RH)  
20A. 348-6312 [1] BEARING  
20B. 358-2266 [1] PLATE AS  
20C. 371-7324 [1] PLATE AS  
20D. 359-3404 [1] PLATE AS  
21. [1] BLADE AS (LH)  
21A. 8P-9770 [1] PLATE  
21B. 371-7325 [1] PLATE AS  
22. 383-3377 [2] CAP-BEARING  
23. 5P-1076 [4] WASHER-HARD (13.5X30X4-MM THK)  
24. 8T-4222 [2] WASHER-PLATED (11X32X2.5-MM THK)  
25. 8T-5878 M [8] BOLT (M24X3X80-MM)  
26. 8T-4123 [1] WASHER (22X35X3.5-MM THK)  
27. 8T-4167 [8] WASHER-HARD (26X44X4-MM THK)  
28. 8T-4183 M [6] BOLT (M12X1.75X40-MM)  
29. 8T-4223 [5] WASHER-HARD (13.5X25.5X3-MM THK)  
30. 8T-4956 M [5] BOLT (M12X1.75X35-MM)  
31. 8T-5460 M [1] BOLT (M20X2.5X40-MM)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP50160771
 

359-3349: BLADE GP-ANGLING

359-3349 BLADE GP-ANGLING
S/N YAC1-UP
Type 2
AN ATTACHMENT
i06131427 SEBP5016
3593349 BLADE GP-ANGLING Parts scheme
  For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [3] FITTING-GREASE (1/8-27 PTF)  
2. 4T-0231 [5] RETAINER  
3. 8D-3791 [3] PIN  
4. 9J-4782 [3] PROTECTOR  
5. 089-8249 [2] SPACER (64X72X13-MM THK)  
6. 104-4817 [1] PIN  
7. 177-4548 [1] PIN  
8. 223-3279 [1] RETAINER  
9. [1] PLATE & FILM GP  
  4B-4158 [2] SCREW-DRIVE (NO 4X0.25-IN)  
  8T-7371 [1] PLATE-SERIAL NUMBER (BLADE)  
10. 437-9738 [2] DOWEL AS  
11. 257-8150 Y [1] EDGE GP-BIT & CUTTING  
12. 259-2968 C [4] SPACER (52.4X57X23-MM THK)  
13. 266-4761 [2] PIN AS  
14. 348-6260 B [6] SHIM (1.5-MM THK)  
15. 477-0065 C [1] PLATE AS  
16. 358-2227 [3] PIN  
17. 358-2260 [1] ARM AS-SUPPORT  
18. 483-9160 [1] BRACKET AS  
19. 370-5549 [1] PIN  
20. C [1] BLADE AS (RH)  
20A. 9R-3761 M [1] BOSS (M10X1.5X51-MM)  
20B. 450-3991 [1] PLATE AS  
20C. 456-9700 [1] BEARING  
21. C [1] BLADE AS (LH)  
21A. 8P-9770 [1] PLATE  
22. 490-1616 [2] CAP-BEARING  
23. 5P-1076 [4] WASHER-HARD (13.5X30X4-MM THK)  
24. 7D-1649 C [2] WASHER-HARD (13.5X32X5-MM THK)  
25. 8T-5878 M [8] BOLT (M24X3X80-MM)  
26. 8T-4123 [1] WASHER (22X35X3.5-MM THK)  
27. 8T-4167 [8] WASHER-HARD (26X44X4-MM THK)  
28. 8T-4183 M [6] BOLT (M12X1.75X40-MM)  
29. 8T-4223 [5] WASHER-HARD (13.5X25.5X3-MM THK)  
30. 8T-4956 M [5] BOLT (M12X1.75X35-MM)  
31. 8T-5460 M [1] BOLT (M20X2.5X40-MM)  
33. 450-3992 C [1] COVER  
34. 8T-4224 C [2] WASHER-HARD (8.8X16X2-MM THK)  
35. 8T-4189 CM [2] BOLT (M8X1.25X20-MM)  
36. 2U-9234 C [2] BUSHING  
37. 466-2917 C [2] SPACER (51.2X57X23-MM THK)  
38. 498-6447 Y [2] SHIM GP-SPECIAL  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP50160772
 

257-0207: EDGE GP-BIT & CUTTING

257-0207 EDGE GP-BIT & CUTTING
S/N YAA1-UP; ECC1-UP
PART OF 257-0210, 358-2259 BLADE GP-ANGLING
FOR USE WITH FOLDABLE BLADE
AN ATTACHMENT
i02322911 SEBP5016
  For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  8E-9379 [1] BIT-END (RH)  
  5J-4773 [22] BOLT-PLOW (3/4-10X2.5-IN)  
  3G-4282 [1] EDGE-CUTTING  
  257-0264 [1] EDGE-CUTTING  
  257-0265 [1] EDGE-CUTTING  
  2J-3506 [22] NUT-FULL (3/4-10-THD)  
  5P-8248 [22] WASHER-HARD (20X36.5X3.5-MM THK)  
 

#SEBP50160773
 

257-8150: EDGE GP-BIT & CUTTING

257-8150 EDGE GP-BIT & CUTTING
S/N YAC1-UP; ECD1-UP; ECE1-UP
PART OF 345-7445, 345-7446, 359-3349 BLADE GP-ANGLING
FOR USE WITH FOLDABLE BLADE
AN ATTACHMENT
i02687894 SEBP5016
2578150 EDGE GP-BIT & CUTTING Parts scheme
  For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8E-9378 [1] BIT-END (LH)  
2. 8E-9379 [1] BIT-END (RH)  
3. 278-2168 C [2] EDGE-CUTTING  
4. 278-2169 C [1] EDGE-CUTTING  
5. 278-2170 C [1] EDGE-CUTTING  
6. 2J-3506 [28] NUT-FULL (3/4-10-THD)  
7. 5J-4773 [28] BOLT-PLOW (3/4-10X2.5-IN)  
8. 5P-8248 [28] WASHER-HARD (20X36.5X3.5-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP50160774
 

3G-4210: EDGE GP-BIT & CUTTING

3G-4210 EDGE GP-BIT & CUTTING -LEVEL CUT
S/N MLW1-UP
19-MM (0.7-IN) THICK. REVERSIBLE
FIELD INSTALLATION
i00364466 SEBP5016
3G4210 EDGE GP-BIT & CUTTING Parts scheme
  For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3G-4282 [2] EDGE-CUTTING  
2. 3G-4285 [2] BIT-END  
3. 2J-3506 [22] NUT-FULL (3/4-10-THD)  
4. 5J-4773 [22] BOLT-PLOW (3/4-10X2.5-IN)  
5. 5P-8248 [22] WASHER-HARD (20X36.5X3.5-MM THK)  
 

#SEBP50160775
 

4T-2314: EDGE GP-BIT & CUTTING

4T-2314 EDGE GP-BIT & CUTTING
S/N ECF1-UP; NEJ1-UP; STL1-UP
PART OF 359-3410 BLADE & EDGE GP-ANGLING, 137-8729, 235-5001 BLADE GP-ANGLING
AN ATTACHMENT
i00375931 SEBP5016
4T2314 EDGE GP-BIT & CUTTING Parts scheme
  For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8E-9378 [1] BIT-END (LH)  
  8E-9379 [1] BIT-END (RH)  
2. 4T-2315 [2] EDGE-CUTTING  
3. 5J-4773 [28] BOLT-PLOW (3/4-10X2.5-IN)  
  2J-3506 [28] NUT-FULL (3/4-10-THD)  
  5P-8248 [28] WASHER-HARD (20X36.5X3.5-MM THK)  
 

#SEBP50160776
 

507-2847: EDGE GP-BIT & CUTTING

507-2847 EDGE GP-BIT & CUTTING -GENERAL DUTY
S/N MLW1-UP
FIELD INSTALLATION
i07058483 SEBP5016
5072847 EDGE GP-BIT & CUTTING Parts scheme
  For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3G-4282 [2] EDGE-CUTTING  
2. 140-6787 [1] BIT-END (RH)  
3. 140-6788 [1] BIT-END (LH)  
4. 2J-3506 [22] NUT-FULL (3/4-10-THD)  
5. 5J-4773 [22] BOLT-PLOW (3/4-10X2.5-IN)  
6. 5P-8248 [22] WASHER-HARD (20X36.5X3.5-MM THK)  
 

#SEBP50160777
 

507-2848: EDGE GP-BIT & CUTTING

507-2848 EDGE GP-BIT & CUTTING -LEVEL CUT
S/N MLW1-UP
FOR USE WITH SEMI-UNIVERSAL BLADES
FIELD INSTALLATION
i07058315 SEBP5016
5072848 EDGE GP-BIT & CUTTING Parts scheme
  For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4T-6659 [1] EDGE-CUTTING  
2. 9U-8057 [2] EDGE-CUTTING  
3. 323-4279 [1] BIT-END (RH)  
4. 323-4280 [1] BIT-END (LH)  
5. 2J-3506 [23] NUT-FULL (3/4-10-THD)  
6. 5J-4773 [23] BOLT-PLOW (3/4-10X2.5-IN)  
7. 5P-8248 [23] WASHER-HARD (20X36.5X3.5-MM THK)  
 

#SEBP50160778
 

507-2849: EDGE GP-BIT & CUTTING

507-2849 EDGE GP-BIT & CUTTING -LEVEL CUT REVERSIBLE
S/N MLW1-UP
SEMI-UNIVERSAL
FOR USE WITH ANGLE BLADE
FIELD INSTALLATION
i06991472 SEBP5016
5072849 EDGE GP-BIT & CUTTING Parts scheme
  For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3G-4285 [2] BIT-END  
2. 4T-6659 [1] EDGE-CUTTING  
3. 9U-8057 [2] EDGE-CUTTING  
4. 2J-3506 [23] NUT-FULL (3/4-10-THD)  
5. 5J-4773 [23] BOLT-PLOW (3/4-10X2.5-IN)  
6. 5P-8248 [23] WASHER-HARD (20X36.5X3.5-MM THK)  
 

#SEBP50160779
 

507-2850: EDGE GP-BIT & CUTTING

507-2850 EDGE GP-BIT & CUTTING -GENERAL DUTY
S/N MLW1-UP
FOR USE WITH SEMI-UNIVERSAL BLADES
FIELD INSTALLATION
i07058326 SEBP5016
5072850 EDGE GP-BIT & CUTTING Parts scheme
  For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4T-6659 [1] EDGE-CUTTING  
2. 9U-8057 [2] EDGE-CUTTING  
3. 140-6787 [1] BIT-END (RH)  
4. 140-6788 [1] BIT-END (LH)  
5. 2J-3506 [23] NUT-FULL (3/4-10-THD)  
6. 5J-4773 [23] BOLT-PLOW (3/4-10X2.5-IN)  
7. 5P-8248 [23] WASHER-HARD (20X36.5X3.5-MM THK)  
 

Information:

Caterpillar Parts SIS Catalog D6N :

BLADE GP-ANGLING
358-2259 BLADE GP-ANGLING
BLADE GP-ANGLING
358-2259 BLADE GP-ANGLING
BLADE GP-ANGLING
345-7446 BLADE GP-ANGLING
BLADE GP-ANGLING
345-7446 BLADE GP-ANGLING
BLADE GP-ANGLING
345-7445 BLADE GP-ANGLING
BLADE GP-ANGLING
345-7445 BLADE GP-ANGLING
BLADE GP-ANGLING
257-8156 BLADE GP-ANGLING
BLADE GP-ANGLING
257-8155 BLADE GP-ANGLING
BLADE GP-ANGLING
359-3349 BLADE GP-ANGLING
257-0207 EDGE GP-BIT & CUTTING
EDGE GP-BIT & CUTTING
257-8150 EDGE GP-BIT & CUTTING
EDGE GP-BIT & CUTTING
3G-4210 EDGE GP-BIT & CUTTING
EDGE GP-BIT & CUTTING
4T-2314 EDGE GP-BIT & CUTTING
EDGE GP-BIT & CUTTING
507-2847 EDGE GP-BIT & CUTTING
EDGE GP-BIT & CUTTING
507-2848 EDGE GP-BIT & CUTTING
EDGE GP-BIT & CUTTING
507-2849 EDGE GP-BIT & CUTTING

Truck sale:

 
 
Caterpillar D6N
- Crawler dozers
WESTERN STATES EQUIPMENT
Caterpillar D6NL AZ2, Crawler dozers, Construction
152,512 
Caterpillar D6NL AZ2, Crawler dozers, Construction
- Crawler dozers
MICHIGAN CAT
Caterpillar D6N, Crawler dozers, Construction
139,000 
Caterpillar D6N, Crawler dozers, Construction
- Crawler dozers
ZIEGLER CAT
 
110,000 
Caterpillar D6N, Crawler dozers, Construction
- Crawler dozers
WESTERN STATES EQUIPMENT
Caterpillar D6N, Crawler dozers, Construction
 
Caterpillar D6N, Crawler dozers, Construction
- Crawler dozers
CGT - COMPAGNIA GENERALE TRATTORI
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.