AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

423-3712 BLADE AS-UNIVERSAL S/N ZJB1-UP PART OF 421-1800 BLADE GP-UNIVERSAL AN ATTACHMENT D6T XL TRACK-TYPE TRACTOR


WORK TOOLS
BLADE GP
HYDRAULIC SYSTEM
CONTROL GP-WINCH HYDRAULIC

TRACK-TYPE TRACTOR D6T XL TRACK-TYPE TRACTOR GMK
 D6T TRACK-TYPE TRACTOR XL, XW, LGP, Differential Steering GMK00001-UP (MACHINE) POWERED BY C9.3 Engine SEBP5017 D6T XL GMK   (2011)

WORK TOOLS

BLADE GP
BLADE AS-STRAIGHT
369-3288 BLADE AS-STRAIGHT
BLADE AS-UNIVERSAL
422-6316 BLADE AS-UNIVERSAL
BLADE AS-UNIVERSAL
423-3712 BLADE AS-UNIVERSAL
BLADE AS-UNIVERSAL
424-4142 BLADE AS-UNIVERSAL
BLADE AS-UNIVERSAL
424-7235 BLADE AS-UNIVERSAL
BLADE GP-UNIVERSAL
373-1376 BLADE GP-UNIVERSAL
 

#SEBP50171340
 

423-3712: BLADE AS-UNIVERSAL

423-3712 BLADE AS-UNIVERSAL
S/N ZJB1-UP
PART OF 421-1800 BLADE GP-UNIVERSAL
AN ATTACHMENT
i05195663 SEBP5017
4233712 BLADE AS-UNIVERSAL Parts scheme
  For full view, you need register

Parts for your D6T XL TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2C-9259 [2] PLATE-IDENTIFICATION (CAT)  
2. 4J-1641 [2] TRUNNION  
3. 4T-1504 [2] TRUNNION  
4. 7J-5131 [2] TRUNNION  
5. 8E-2244 [2] DEFLECTOR  
6. 9W-6381 [1] PLATE  
7. 423-3714 [2] EDGE  
8. 423-3713 [1] EDGE  
 

#SEBP50171341
 

424-4142: BLADE AS-UNIVERSAL

424-4142 BLADE AS-UNIVERSAL
S/N ZJB1-UP
PART OF 421-4312 BLADE GP-UNIVERSAL
AN ATTACHMENT
i05195666 SEBP5017
4244142 BLADE AS-UNIVERSAL Parts scheme
  For full view, you need register

Parts for your D6T XL TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2C-9259 [2] PLATE-IDENTIFICATION (CAT)  
2. 4J-1641 [2] TRUNNION  
3. 4T-1504 [2] TRUNNION  
4. 7J-5131 [2] TRUNNION  
5. 9W-6381 [1] PLATE  
6. 305-9418 [2] EDGE  
7. 293-5150 [2] PLATE-WEAR  
8. 305-9417 [1] EDGE  
 

#SEBP50171342
 

424-7235: BLADE AS-UNIVERSAL

424-7235 BLADE AS-UNIVERSAL
S/N ZJB1-UP
PART OF 424-1326 BLADE & EDGE GP-UNIVERSAL
AN ATTACHMENT
i05195672 SEBP5017
4247235 BLADE AS-UNIVERSAL Parts scheme
  For full view, you need register

Parts for your D6T XL TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2C-9259 [2] PLATE-IDENTIFICATION (CAT)  
2. 4J-1641 [2] TRUNNION  
3. 4T-1504 [2] TRUNNION  
4. 7J-5131 [2] TRUNNION  
5. 329-7753 [1] EDGE  
6. 329-7754 [2] EDGE  
 

#SEBP50171343
 

373-1376: BLADE GP-UNIVERSAL

373-1376 BLADE GP-UNIVERSAL
S/N ZJB1-UP
AN ATTACHMENT
i04400726 SEBP5017
3731376 BLADE GP-UNIVERSAL Parts scheme
  For full view, you need register

Parts for your D6T XL TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6Y-6751 [1] PIN  
2. 137-4234 [1] PLATE-IDENTIFICATION (WORK TOOL)  
3. 251-9827 [4] TRUNNION  
4. 251-9829 [1] RETAINER  
5. 312-5694 [1] SETSCREW (1/4-20X0.25-IN)  
6. 375-1307 [1] BLADE AS  
  2C-9259 [2] PLATE-IDENTIFICATION (CAT)  
7. 375-1348 [2] EDGE-CUTTING  
8. 2J-3506 [32] NUT-FULL (3/4-10-THD)  
9. 5J-4773 [32] BOLT-PLOW (3/4-10X2.5-IN)  
10. 5P-8248 [32] WASHER-HARD (20X36.5X3.5-MM THK)  
11. 7X-2553 M [1] BOLT (M16X2X40-MM)  
12. 7X-2563 M [16] BOLT (M20X2.5X60-MM)  
  M   METRIC PART
 

#SEBP50171344
 

421-1721: BLADE GP-UNIVERSAL

421-1721 BLADE GP-UNIVERSAL -COAL
S/N GMK1-UP
15.18-CU M (19.86-CU YD)
FOR USE WITH @@@@@378-7903@@@@@
AN ATTACHMENT
i05191516 SEBP5017
4211721 BLADE GP-UNIVERSAL Parts scheme
  For full view, you need register

Parts for your D6T XL TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4T-6659 [2] EDGE-CUTTING  
2. 137-4234 [1] PLATE-IDENTIFICATION (WORK TOOL)  
3. 312-5694 [1] SETSCREW (1/4-20X0.25-IN)  
4. 329-7790 [1] EDGE-CUTTING  
5. 329-7791 [2] EDGE-CUTTING  
6. 329-7792 [1] EDGE-CUTTING  
7. 422-6316 Y [1] BLADE AS-UNIVERSAL  
8. 2J-3506 [28] NUT-FULL (3/4-10-THD)  
9. 5J-4771 [28] BOLT-PLOW (3/4-10X2.75-IN)  
10. 5P-8248 [28] WASHER-HARD (20X36.5X3.5-MM THK)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP50171345
 

421-1800: BLADE GP-UNIVERSAL

421-1800 BLADE GP-UNIVERSAL -COAL
S/N ZJB1-UP
9.6-CU M (12.56-CU YD)
AN ATTACHMENT
i05195645 SEBP5017
4211800 BLADE GP-UNIVERSAL Parts scheme
  For full view, you need register

Parts for your D6T XL TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4T-6659 [2] EDGE-CUTTING  
2. 137-4234 [1] PLATE-IDENTIFICATION (WORK TOOL)  
3. 423-3712 Y [1] BLADE AS-UNIVERSAL  
4. 423-3745 [2] EDGE-CUTTING  
5. 423-3746 [1] EDGE-CUTTING  
6. 423-3747 [1] EDGE-CUTTING  
7. 2J-3506 [30] NUT-FULL (3/4-10-THD)  
8. 312-5694 [1] SETSCREW (1/4-20X0.25-IN)  
9. 5J-4773 [30] BOLT-PLOW (3/4-10X2.5-IN)  
10. 5P-8248 [30] WASHER-HARD (20X36.5X3.5-MM THK)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP50171346
 

421-4312: BLADE GP-UNIVERSAL

421-4312 BLADE GP-UNIVERSAL
S/N ZJB1-UP
6.88-CU M (9-CU YD)
FOR USE WITH @@@@@352-7617@@@@@
AN ATTACHMENT
i05195648 SEBP5017
4214312 BLADE GP-UNIVERSAL Parts scheme
  For full view, you need register

Parts for your D6T XL TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-4632 [2] PIN-COTTER  
2. 4T-1481 [1] LINK AS  
3. 4T-3009 [1] EDGE-CUTTING  
4. 4T-4435 [1] BIT-END (RH)  
5. 4T-4436 [1] BIT-END (LH)  
6. 8H-8898 [2] PIN  
7. 137-4234 [1] PLATE-IDENTIFICATION (WORK TOOL)  
8. 305-9452 [2] EDGE-CUTTING  
9. 312-5694 [1] SETSCREW (1/4-20X0.25-IN)  
10. 424-4142 Y [1] BLADE AS-UNIVERSAL  
11. 2J-3506 [36] NUT-FULL (3/4-10-THD)  
12. 5J-4773 [36] BOLT-PLOW (3/4-10X2.5-IN)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP50171347
 

366-4747: CONTROL GP-WINCH

366-4747 CONTROL GP-WINCH
S/N ZJB1-1049; SLJ1-1024; GMK1-999
CANNOT BE USED WITH @@@@@354-8631@@@@@, @@@@@354-8632@@@@@, HYDRAULIC AR-REAR, CONTROL AR-HYDRAULIC (BULLDOZER, RIPPER, WINCH), CONTROL AR-HYDRAULIC (BULLDOZER, RIPPER)
AN ATTACHMENT
i04367181 SEBP5017
  For full view, you need register

Parts for your D6T XL TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  369-3559 Y [1] CONTROL GP-WINCH  
   
  320-6687 [1] FILM-IDENTIFICATION (WINCH OIL)  
    (ON REAR RH SIDE OF NON-METALLICS OUTBOARD OF TWO WINCH LIGHTS)
  375-6466 [1] FILM-INSTRUCTION (WINCH CONTROL)  
    (ON RAISED SURFACE TO RIGHT OF WINCH CONTROL)
  Y   SEPARATE ILLUSTRATION
 

#SEBP50171348
 

369-3559: CONTROL GP-WINCH

369-3559 CONTROL GP-WINCH
S/N ZJB1-1049; SLJ1-1024; GMK1-999
PART OF 324-3058 CONTROL AR-HYDRAULIC, 366-4747 CONTROL GP-WINCH
AN ATTACHMENT
i04355132 SEBP5017
3693559 CONTROL GP-WINCH Parts scheme
  For full view, you need register

Parts for your D6T XL TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 112-6646 M [4] LOCKNUT (M6X1-THD)  
2. 138-2434 [2] LAMP (24-VOLT)  
3. 279-2504 Y [1] CONTROL GP-JOYSTICK (WINCH)  
4. 336-3850 [1] PLATE AS  
  8T-3490 M [3] NUT-WELD (M10X1.5-THD)  
5. 351-6642 [1] COVER AS  
  114-9125 [1] HOLDER-CUP  
6. 365-8755 [1] HARNESS AS-OPERATOR CONTROLS  
  102-8804 [2] KIT-RECEPTACLE (4-PIN)  
    (EACH INCLUDES RECEPTACLE AS & WEDGE)
  8T-8730 [1] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  8T-8737 [17] PLUG-SEAL  
  9X-3401 [7] PIN-CONNECTOR (16-GA TO 18-GA)  
  9X-3402 [31] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM)  
  130-6790 [4] TERMINAL AS-BLADE  
    (EACH INCLUDES)
  6V-2689 E TUBE-HEAT SHRINK (6.35-MM DIA)(1-CM)  
  097-7234 [1] TERMINAL-BLADE (18-GA TO 22-GA)  
  131-1506 [1] TERMINAL AS  
  2L-8079 [1] TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW)  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(3-CM)  
  155-2255 [4] KIT-CONNECTING PLUG (12-PIN)  
  155-2270 [4] KIT-CONNECTING PLUG (2-PIN)  
  155-2271 [2] KIT-CONNECTING PLUG (4-PIN)  
    (EACH INCLUDES PLIG AS, WEDGE & INTERFACE SEAL)
  230-4009 [1] PLUG AS-CONNECTOR (12-PIN)  
  264-7034 [1] SEAL-CONNECTOR  
  230-5010 [1] PLUG AS-CONNECTOR (6-PIN)  
  264-7032 [1] SEAL-CONNECTOR  
  274-3774 [1] CAP-CONNECTOR  
7. 369-5910 [1] HARNESS AS-OPERATOR CONTROLS  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
  102-8801 [4] KIT-RECEPTACLE (12-PIN)  
    (EACH INCLUDES RECEPTACLE AS & WEDGE)
  8T-8737 [16] PLUG-SEAL  
  9X-3401 [14] PIN-CONNECTOR (16-GA TO 18-GA)  
  9X-3402 [17] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  119-3662 E TUBE-HEAT SHRINK (10.85-MM DIA)(20-CM)  
  122-4387 [1] CONNECTOR-PLUG (31-PIN)  
8. 4P-8134 [2] CLIP (LADDER)  
9. 5M-3062 [1] BOLT (3/8-16X0.75-IN)  
10. 5P-1075 [1] WASHER-HARD (10.2X22.5X3-MM THK)  
11. 7K-1181 [18] STRAP-CABLE  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP50171349
 

378-3855: CONTROL GP-WINCH

378-3855 CONTROL GP-WINCH
S/N ZJB1050-UP; SLJ1025-UP; GMK1000-UP
CANNOT BE USED WITH FUEL TANK GUARDS
AN ATTACHMENT
i05171533 SEBP5017
3783855 CONTROL GP-WINCH Parts scheme
  For full view, you need register

Parts for your D6T XL TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 172-4864 [1] GUARD AS  
2. 226-8206 [1] GUARD  
3. 320-6687 [1] FILM-IDENTIFICATION (WINCH OIL)  
4. 325-0067 Y [1] LINES GP-PILOT  
5. 325-0074 Y [1] VALVE & MTG GP-IMPLEMENT CONT  
6. 325-1614 I [1] HOSE AS  
7. 350-9180 Y [1] WIRING GP-VALVE  
8. 375-6466 [1] FILM-INSTRUCTION (WINCH CONTROL)  
9. 378-7925 Y [1] CONTROL GP-WINCH  
10. 384-7703 Y [1] LINES GP-RETURN  
11. 4J-0520 [2] SEAL-O-RING  
12. 8T-4121 [10] WASHER-HARD (11X21X2.5-MM THK)  
13. 8T-4136 M [6] BOLT (M10X1.5X25-MM)  
14. 8T-4185 M [4] BOLT (M10X1.5X50-MM)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Special Instruction
Spherical Bearings for Bulldozers and Rippers{7551, 6050, 6313}
Spherical Bearings for Bulldozers and Rippers{7551, 6050, 6313}
Service Magazine
Special Instruction SEHS9429-01 Available for Spherical Bearings for Bulldozers and Rippers{7551,6050,6313}
1995/01/16

Caterpillar Parts SIS Catalog D6T XL :

BLADE AS-UNIVERSAL
422-6316 BLADE AS-UNIVERSAL
BLADE AS-STRAIGHT
369-3288 BLADE AS-STRAIGHT
BLADE AS-STRAIGHT
353-3039 BLADE AS-STRAIGHT
BLADE AS-STRAIGHT
353-3038 BLADE AS-STRAIGHT
BLADE AS-STRAIGHT
334-1773 BLADE AS-STRAIGHT
BLADE AS-SEMI-UNIVERSAL
369-3286 BLADE AS-SEMI-UNIVERSAL
BLADE AS-SEMI-UNIVERSAL
369-3284 BLADE AS-SEMI-UNIVERSAL
BLADE AS-SEMI-UNIVERSAL
334-1820 BLADE AS-SEMI-UNIVERSAL
BLADE AS-UNIVERSAL
424-4142 BLADE AS-UNIVERSAL
BLADE AS-UNIVERSAL
424-7235 BLADE AS-UNIVERSAL
BLADE GP-UNIVERSAL
373-1376 BLADE GP-UNIVERSAL
BLADE GP-UNIVERSAL
421-1721 BLADE GP-UNIVERSAL
BLADE GP-UNIVERSAL
421-1800 BLADE GP-UNIVERSAL
BLADE GP-UNIVERSAL
421-4312 BLADE GP-UNIVERSAL
366-4747 CONTROL GP-WINCH
CONTROL GP-WINCH
369-3559 CONTROL GP-WINCH

Truck sale:

Caterpillar D6T XL
 
Caterpillar D6T XL
- Crawler dozers
HOLT OF CALIFORNIA
Caterpillar D6TXL, Crawler dozers, Construction
275,000 
Caterpillar D6TXL, Crawler dozers, Construction
- Crawler dozers
RIGGS CAT
Caterpillar D6TXLSU, Crawler dozers, Construction
175,000 
Caterpillar D6TXLSU, Crawler dozers, Construction
- Crawler dozers
FOLEY EQUIPMENT COMPANY
 
249,800 
Caterpillar D6T XL, on highway trucks, Transport
- on highway trucks
YANCEY BROS. CO.
 
249,800 
Caterpillar D6T XL, Crawler dozers, Construction
- Crawler dozers
YANCEY BROS. CO.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.