378-3856 CONTROL GP-WINCH S/N ZJB1050-UP; SLJ1025-UP; GMK1000-UP FOR USE WITH FUEL TANK GUARDS AN ATTACHMENT D6T XL

HYDRAULIC SYSTEM

CONTROL GP-WINCH HYDRAULIC

0. 378-3856 CONTROL GP
1. 378-7925 CONTROL GP
2. 433-3536 CONTROL GP
3. 433-3536 CONTROL GP

WORK TOOLS

GROUND ENGAGING TOOLS (G.E.T.)

4. 106-0955 EDGE GP-BI
5. 109-9092 EDGE GP-BI
6. 229-6957 EDGE GP-BI
7. 294-8236 EDGE GP-BI
8. 507-2855 EDGE GP-BI
9. 507-2856 EDGE GP-BI
0. INFORMATION

TRACK-TYPE TRACTOR D6T XL TRACK-TYPE TRACTOR GMK
D6T TRACK-TYPE TRACTOR XL, XW, LGP, Differential Steering GMK00001-UP (MACHINE) POWERED BY C9.3 Engine SEBP5017 D6T XL GMK (2011)

HYDRAULIC SYSTEM

CONTROL GP-WINCH HYDRAULIC

366-4747 CONTROL GP-WINCH

369-3559 CONTROL GP-WINCH

378-3855 CONTROL GP-WINCH

378-3856 CONTROL GP-WINCH

378-7925 CONTROL GP-WINCH

433-3536 CONTROL GP-WINCH

#SEBP50171350

378-3856: CONTROL GP-WINCH

CONTROL GP-WINCH

378-3856 CONTROL GP-WINCH
S/N ZJB1050-UP; SLJ1025-UP; GMK1000-UP
FOR USE WITH FUEL TANK GUARDS
AN ATTACHMENT

i05171546 SEBP5017

For full view, you need register

Parts for your D6T XL TRACK-TYPE TRACTOR:

Pos.	Part No	Qty	Parts name
1.	172-4864	[1]	GUARD AS
2.	320-6687	[1]	FILM-IDENTIFICATION (WINCH OIL)
3.	325-0067 Y	[1]	LINES GP-PILOT
4.	325-0074 Y	[1]	VALVE & MTG GP-IMPLEMENT CONT
5.	325-1614 I	[1]	HOSE AS
6.	350-9180 Y	[1]	WIRING GP-VALVE
7.	361-7983	[1]	GUARD AS
8.	361-7987	[1]	PLATE
9.	375-6466	[1]	FILM-INSTRUCTION (WINCH CONTROL)
10.	378-7925 Y	[1]	CONTROL GP-WINCH
11.	384-7703 Y	[1]	LINES GP-RETURN
12.	4J-0520	[2]	SEAL-O-RING
13.	7X-7729	[6]	WASHER (11X25X3-MM THK)
14.	8T-4121	[4]	WASHER-HARD (11X21X2.5-MM THK)
15.	8T-4185 M	[4]	BOLT (M10X1.5X50-MM)
16.	8T-4195 M	[6]	BOLT (M10X1.5X30-MM)
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP50171351

378-7925: CONTROL GP-WINCH

CONTROL GP-WINCH

378-7925 CONTROL GP-WINCH
S/N ZJB1050-UP; SLJ1025-UP; GMK1000-UP
PART OF 378-3857, 378-3858 CONTROL AR-HYDRAULIC, 378-3855, 378-3856 CONTROL GP-WINCH
AN ATTACHMENT

i05171540 SEBP5017

For full view, you need register

Parts for your D6T XL TRACK-TYPE TRACTOR:

Pos.	Part No	Qty	Parts name
1.	433-3535 Y	[1]	WIRING GP-WINCH (CHASSIS)
2.	433-3536 Y	[1]	CONTROL GP-WINCH (PLATFORM)
	Y		SEPARATE ILLUSTRATION

#SEBP50171352

433-3536: CONTROL GP-WINCH

CONTROL GP-WINCH

433-3536 CONTROL GP-WINCH
S/N ZJB1050-UP; SLJ1025-UP; GMK1000-UP
PART OF 378-7925 CONTROL GP-WINCH
Type 1
AN ATTACHMENT

i05214718 SEBP5017

For full view, you need register

Parts for your D6T XL TRACK-TYPE TRACTOR:

Pos.	Part No	Qty	Parts name
1.	112-6646 M	[4]	LOCKNUT (M6X1-THD)
2.	138-2434	[2]	LAMP (24-VOLT)
3.	279-2504 Y	[1]	CONTROL GP-JOYSTICK (WINCH)
4.	336-3850	[1]	PLATE AS
	8T-3490 M	[3]	NUT-WELD (M10X1.5-THD)
5.	395-3834	[1]	HARNESS AS-OPERATOR CONTROLS
	102-8804	[2]	KIT-RECEPTACLE (4-PIN)
			(EACH INCLUDES RECEPTACLE AS & WEDGE)
	8T-8730	[1]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	8T-8737	[16]	PLUG-SEAL
	9X-3401	[7]	PIN-CONNECTOR (16-GA TO 18-GA)
	9X-3402	[31]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM)
	097-7234	[4]	TERMINAL-BLADE (18-GA TO 22-GA)
	2L-8079	[1]	TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW)
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
	155-2257	[1]	KIT-CONNECTING PLUG (12-PIN)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
	230-4009	[1]	PLUG AS-CONNECTOR (12-PIN)
	264-7034	[1]	SEAL-CONNECTOR
	230-5010	[1]	PLUG AS-CONNECTOR (6-PIN)
	264-7032	[1]	SEAL-CONNECTOR
	374-7463	[1]	CAP-SEAL
6.	4P-8134	[1]	CLIP (LADDER)
7.	7K-1181	[16]	STRAP-CABLE
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP50171353

433-3536: CONTROL GP-WINCH

CONTROL GP-WINCH

433-3536 CONTROL GP-WINCH
S/N ZJB1050-UP; SLJ1025-UP; GMK1000-UP
PART OF 378-7925 CONTROL GP-WINCH
Type 2
AN ATTACHMENT

i06617486 SEBP5017

For full view, you need register

Parts for your D6T XL TRACK-TYPE TRACTOR:

Pos.	Part No	Qty	Parts name
1.	112-6646 M	[4]	LOCKNUT (M6X1-THD)
2.	138-2434 C	[2]	LAMP (24-VOLT)
3.	438-8680 CY	[1]	CONTROL GP-JOYSTICK (IMPLEMENT)
4.	336-3850	[1]	PLATE AS
	8T-3490 M	[3]	NUT-WELD (M10X1.5-THD)
5.	395-3834	[1]	HARNESS AS-OPERATOR CONTROLS
	102-8804	[2]	KIT-RECEPTACLE (4-PIN)
			(EACH INCLUDES RECEPTACLE AS & WEDGE)
	8T-8730	[1]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	8T-8737	[16]	PLUG-SEAL
	9X-3401	[7]	PIN-CONNECTOR (16-GA TO 18-GA)
	9X-3402	[31]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM)
	097-7234	[4]	TERMINAL-BLADE (18-GA TO 22-GA)
	2L-8079	[1]	TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW)
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
	155-2257	[1]	KIT-CONNECTING PLUG (12-PIN)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
	230-4009	[1]	PLUG AS-CONNECTOR (12-PIN)
	264-7034	[1]	SEAL-CONNECTOR
	230-5010	[1]	PLUG AS-CONNECTOR (6-PIN)
	264-7032	[1]	SEAL-CONNECTOR
	374-7463	[1]	CAP-SEAL
6.	4P-8134	[1]	CLIP (LADDER)
7.	7K-1181	[16]	STRAP-CABLE
	C		CHANGE FROM PREVIOUS TYPE
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP50171354

106-0955: EDGE GP-BIT & CUTTING

EDGE GP-BIT & CUTTING

106-0955 EDGE GP-BIT & CUTTING
S/N SLJ1-UP; GNL1-UP; GGP1-UP
PART OF 334-1756, 334-1819, 369-3287 BLADE & EDGE GP-SEMI-UNIVERSAL
AN ATTACHMENT

i01002519 SEBP5017

1060955 EDGE GP-BIT & CUTTING Parts scheme

For full view, you need register

Parts for your D6T XL TRACK-TYPE TRACTOR:

Pos.	Part No	Qty	Parts name
1.	9W-8874	[1]	BIT-END (RH)
2.	9W-8875	[1]	BIT-END (LH)
3.	106-0956	[2]	EDGE-CUTTING
4.	5J-4773	[30]	BOLT-PLOW (3/4-10X2.5-IN)
5.	5P-8248	[30]	WASHER-HARD (20X36.5X3.5-MM THK)
6.	2J-3506	[30]	NUT-FULL (3/4-10-THD)

#SEBP50171355

109-9092: EDGE GP-BIT & CUTTING

EDGE GP-BIT & CUTTING

109-9092 EDGE GP-BIT & CUTTING
S/N EG41-UP
PART OF 334-1764 BLADE & EDGE GP-ANGLING
AN ATTACHMENT

i01017382 SEBP5017

1099092 EDGE GP-BIT & CUTTING Parts scheme

For full view, you need register

Parts for your D6T XL TRACK-TYPE TRACTOR:

Pos.	Part No	Qty	Parts name
1.	9W-8875	[1]	BIT-END (LH)
2.	9W-8874	[1]	BIT-END (RH)
3.	5J-4773	[36]	BOLT-PLOW (3/4-10X2.5-IN)
4.	5P-8248	[36]	WASHER-HARD (20X36.5X3.5-MM THK)
5.	2J-3506	[36]	NUT-FULL (3/4-10-THD)
6.	109-9093	[4]	EDGE-CUTTING

#SEBP50171356

229-6957: EDGE GP-BIT & CUTTING

EDGE GP-BIT & CUTTING

229-6957 EDGE GP-BIT & CUTTING
S/N ZJB1-UP; SJG1-UP; GNK1-UP
PART OF 334-1772, 353-3040, 369-3289, 397-5425 BLADE & EDGE GP-STRAIGHT
AN ATTACHMENT

i02421806 SEBP5017

2296957 EDGE GP-BIT & CUTTING Parts scheme

For full view, you need register

Parts for your D6T XL TRACK-TYPE TRACTOR:

Pos.	Part No	Qty	Parts name
1.	9W-8874	[1]	BIT-END (RH)
2.	9W-8875	[1]	BIT-END (LH)
3.	4T-2950	[2]	EDGE-CUTTING
4.	5J-4773	[32]	BOLT-PLOW (3/4-10X2.5-IN)
5.	2J-3506	[32]	NUT-FULL (3/4-10-THD)

#SEBP50171357

294-8236: EDGE GP-BIT & CUTTING

EDGE GP-BIT & CUTTING

294-8236 EDGE GP-BIT & CUTTING
S/N FLS1-UP
PART OF 334-1781 BLADE & EDGE GP-ANGLING
AN ATTACHMENT

i02718535 SEBP5017

For full view, you need register

Parts for your D6T XL TRACK-TYPE TRACTOR:

Part No	Qty	Parts name
9W-8874	[1]	BIT-END (RH)
9W-8875	[1]	BIT-END (LH)
5J-4773	[12]	BOLT-PLOW (3/4-10X2.5-IN)
5J-2409	[28]	BOLT-PLOW (7/8-9X3-IN)
4T-2923	[4]	EDGE-CUTTING
2J-3506	[12]	NUT-FULL (3/4-10-THD)
2J-3505	[28]	NUT-FULL (7/8-9-THD)
5P-8248	[12]	WASHER-HARD (20X36.5X3.5-MM THK)
5P-8249	[28]	WASHER-HARD (24X41.5X4-MM THK)

#SEBP50171358

507-2855: EDGE GP-BIT & CUTTING

EDGE GP-BIT & CUTTING

507-2855 EDGE GP-BIT & CUTTING
S/N GMK1-UP
UTILITY
FOR USE WITH SEMI-UNIVERSAL BLADES
FIELD INSTALLATION

i06849590 SEBP5017

5072855 EDGE GP-BIT & CUTTING Parts scheme

For full view, you need register

Parts for your D6T XL TRACK-TYPE TRACTOR:

Pos.	Part No	Qty	Parts name
1.	6Y-3840	[2]	EDGE-CUTTING
2.	122-8617	[1]	BIT-END (LH)
3.	122-8618	[1]	BIT-END (RH)
4.	2J-3506	[28]	NUT-FULL (3/4-10-THD)
5.	5J-4773	[28]	BOLT-PLOW (3/4-10X2.5-IN)
6.	5P-8248	[28]	WASHER-HARD (20X36.5X3.5-MM THK)

#SEBP50171359

507-2856: EDGE GP-BIT & CUTTING

EDGE GP-BIT & CUTTING

507-2856 EDGE GP-BIT & CUTTING
S/N GMK1-UP
GENERAL DUTY
FOR USE WITH SEMI-UNIVERSAL DUTY
FIELD INSTALLATION

i06849603 SEBP5017

5072856 EDGE GP-BIT & CUTTING Parts scheme

For full view, you need register

Parts for your D6T XL TRACK-TYPE TRACTOR:

Pos.	Part No	Qty	Parts name
1.	6Y-3840	[2]	EDGE-CUTTING
2.	6Y-4410	[1]	BIT-END (LH)
3.	6Y-4411	[1]	BIT-END (RH)
4.	2J-3506	[28]	NUT-FULL (3/4-10-THD)
5.	5J-4773	[28]	BOLT-PLOW (3/4-10X2.5-IN)
6.	5P-8248	[28]	WASHER-HARD (20X36.5X3.5-MM THK)