324-3356 HARNESS AS-SOLENOID -TRANSMISSION PUMP BYPASS S/N B9W1-UP PART OF 323-5169 WIRING GP-SENSOR AN ATTACHMENT 120M

Part No	Qty	Parts name
155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
		(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
102-8802	[1]	KIT-RECEPTACLE (2-PIN)
		(INCLUDES RECEPTACLE AS & WEDGE)
8T-8729	[2]	PIN-CONNECTOR (16-GA TO 20-GA)
8T-8730	[2]	SOCKET-CONNECTOR (16-GA TO 18-GA)

#SEBP50270251

324-3355: HARNESS AS-WIRING

HARNESS AS-WIRING

324-3355 HARNESS AS-WIRING -TRANSMISSION PUMP PRESSURE
S/N B9W1-UP
PART OF 323-5169 WIRING GP-SENSOR
AN ATTACHMENT

i06064210 SEBP5027

For full view, you need register

Parts for your 120M MOTOR GRADER:

CATERPILLAR SIS

Part No	Qty	Parts name
155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
		(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
102-8803	[1]	KIT-RECEPTACLE (3-PIN)
		(INCLUDES RECEPTACLE AS & WEDGE)
8T-8729	[3]	PIN-CONNECTOR (16-GA TO 20-GA)
114-8843 BE		SLEEVE-PLASTIC (20-CM)
8T-8730	[3]	SOCKET-CONNECTOR (16-GA TO 18-GA)
3E-3371	[1]	WEDGE-RECEPTACLE LOCK (3-PIN)
B		USE AS REQUIRED
E		ORDER BY THE CENTIMETER

#SEBP50270252

555-0489: HARNESS AS-WIRING

HARNESS AS-WIRING

555-0489 HARNESS AS-WIRING
S/N B9W1-UP
AN ATTACHMENT

i07719146 SEBP5027

For full view, you need register

Parts for your 120M MOTOR GRADER:

CATERPILLAR SIS

Part No	Qty	Parts name
155-2265	[1]	KIT-CONNECTING PLUG (8-PIN)
		(INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
102-8806	[1]	KIT-RECEPTACLE (8-PIN)
		(INCLUDES RECEPTACLE AS & WEDGE)
9X-3401	[11]	PIN-CONNECTOR (16-GA TO 18-GA)
		-OR-
126-1767	[11]	PIN-CONNECTOR (14-GA TO 16-GA)
8T-8737	[2]	PLUG-SEAL
9X-3402	[9]	SOCKET-CONNECTOR (16-GA TO 18-GA)
		-OR-
126-1768	[9]	SOCKET-CONNECTOR (14-GA TO 16-GA)
329-3734 B		TAPE-ELECTRICAL
125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM)
155-2259	[1]	WEDGE-PLUG LOCK (8-PIN)
B		USE AS REQUIRED
E		ORDER BY THE CENTIMETER

#SEBP50270253

255-1336: HEATER GP-JACKET WATER

HEATER GP-JACKET WATER

255-1336 HEATER GP-JACKET WATER
S/N B9W1-UP
120-VOLT
PART OF 261-0152, 321-2935 SNOW AR-MOTOR GRADER
CANNOT BE USED WITH @@@@@255-1337@@@@@
AN ATTACHMENT

i02720615 SEBP5027

2551336 HEATER GP-JACKET WATER Parts scheme

For full view, you need register

Parts for your 120M MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	260-1555	[1]	ELEMENT AS-JACKET WATER HEATER (120-VOLT, 1000-WATT)
	4D-9986	[1]	SEAL-O-RING
2.	260-1566	[1]	CORD AS-HEATER
3.	8T-4189 M	[1]	BOLT (M8X1.25X20-MM)
4.	8T-4224	[1]	WASHER-HARD (8.8X16X2-MM THK)
5.	6N-1604	[1]	CAP AS-DUST
	M		METRIC PART

#SEBP50270254

255-1337: HEATER GP-JACKET WATER

HEATER GP-JACKET WATER

255-1337 HEATER GP-JACKET WATER
S/N B9W1-UP
240-VOLT
CANNOT BE USED WITH @@@@@255-1336@@@@@
AN ATTACHMENT

i02720595 SEBP5027

2551337 HEATER GP-JACKET WATER Parts scheme

For full view, you need register

Parts for your 120M MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	260-1556	[1]	ELEMENT AS-JACKET WATER HEATER (240-VOLT, 1000-WATT)
	4D-9986	[1]	SEAL-O-RING
2.	260-1569	[1]	CORD AS-HEATER
3.	8T-4189 M	[1]	BOLT (M8X1.25X20-MM)
4.	8T-4224	[1]	WASHER-HARD (8.8X16X2-MM THK)
5.	6N-1604	[1]	CAP AS-DUST
	M		METRIC PART

#SEBP50270255

235-6188: INSTALLATION AR-COMMUNICATION

INSTALLATION AR-COMMUNICATION

235-6188 INSTALLATION AR-COMMUNICATION -PRODUCT LINK
S/N B9W1-UP
PART OF 349-8722 OPTION AR-REGIONAL
CANNOT BE USED WITH @@@@@360-5941@@@@@
AN ATTACHMENT

i02185596 SEBP5027

2356188 INSTALLATION AR-COMMUNICATION Parts scheme

For full view, you need register

Parts for your 120M MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8C-5607	[8]	MOUNT-ISOLATION
2.	8C-5608	[4]	SPACER (6.5X9.5X25.4-MM THK)
3.	261-9391	[1]	HARNESS AS-POWER (PRODUCT LINK RADIO)
	8T-8729	[8]	PIN-CONNECTOR (16-GA TO 20-GA)
	8T-8730	[22]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	8T-8737	[64]	PLUG-SEAL
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(20-CM)
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	160-7690	[1]	PLUG AS-CONNECTOR (70-PIN)
	159-9322	[1]	SEAL-O-RING
	9X-6772	[2]	STRAP-CABLE
	126-1774	[1]	COVER-CONNECTOR
4.	284-8533	[1]	ANTENNA AS
	355-0598	[1]	NUT-SPECIAL
	301-0589	[1]	ANTENNA (FLEXIBLE)
5.	336-3545 Y	[1]	RADIO GP-COMMUNICATION (PRODUCT LINK 121SR)
6.	272-8325	[1]	PLATE AS
7.	272-8326	[1]	PLATE AS
8.	262-1421 Y	[1]	ELECTRONICS GP-COMMUNICATION (PRODUCT LINK 300)
9.	3S-2093	[1]	STRAP-CABLE
10.	8T-2947 M	[4]	BOLT (M6X1X45-MM)
11.	8T-4138 M	[8]	BOLT (M6X1X20-MM)
12.	9X-6165	[4]	WASHER (6.5X22X2.5-MM THK)
13.	9X-8256	[8]	WASHER (6.6X12X2-MM THK)
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP50270256

373-6739: INSTALLATION AR-COMMUNICATION

INSTALLATION AR-COMMUNICATION

373-6739 INSTALLATION AR-COMMUNICATION -PRODUCT LINK
S/N B9W209-UP
PART OF 439-4922 OPTION AR-REGIONAL
AN ATTACHMENT

i04519951 SEBP5027

3736739 INSTALLATION AR-COMMUNICATION Parts scheme

For full view, you need register

Parts for your 120M MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[3]	STRAP-CABLE
2.	8C-5607	[8]	MOUNT-ISOLATION
3.	8C-5608	[4]	SPACER (6.5X9.5X25.4-MM THK)
4.	386-3993	[1]	SERVICE GP-COMMUNICATION (PRODUCT LINK 300)
5.	284-8533	[1]	ANTENNA AS
	301-0589	[1]	ANTENNA (FLEXIBLE)
	355-0598	[1]	NUT-SPECIAL
6.	336-3545 Y	[1]	RADIO GP-COMMUNICATION (PRODUCT LINK 121SR)
8.	361-0422	[1]	COVER
9.	367-9324	[1]	HARNESS AS-CONTROL
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8T-8737	[63]	PLUG-SEAL
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(20-CM)
	9X-3402	[22]	SOCKET-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1768	[22]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	126-1767	[1]	PIN-CONNECTOR (14-GA TO 16-GA)
	9X-3401	[8]	PIN-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1767	[8]	PIN-CONNECTOR (14-GA TO 16-GA)
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
			(INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
	160-7690	[1]	PLUG AS-CONNECTOR (70-PIN)
	159-9322	[1]	SEAL-O-RING
	237-0336	[1]	COVER (CONNECTOR)
10.	156-6175	[1]	CLIP (LADDER)
11.	5C-2890 M	[8]	NUT (M6X1-THD)
12.	7X-2535 M	[3]	BOLT (M6X1X60-MM)
13.	8T-4138 M	[4]	BOLT (M6X1X20-MM)
14.	8T-4971 M	[4]	BOLT (M6X1X30-MM)
15.	9X-6165	[8]	WASHER (6.5X22X2.5-MM THK)
16.	9X-8256	[4]	WASHER (6.6X12X2-MM THK)
17.	5P-4115	[4]	WASHER-HARD (7.2X19X2-MM THK)
18.	287-8257 M	[1]	BOLT (M6X1X65-MM)
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP50270257

233-3126: INSTALLATION GP-LIGHTING

INSTALLATION GP-LIGHTING

233-3126 INSTALLATION GP-LIGHTING
S/N B9W1-UP
FLOOD
PART OF 350-8822 OPTION AR-LIGHTING, 365-1335 SNOW AR-MOTOR GRADER
FOR USE WITH @@@@@238-8825@@@@@
CANNOT BE USED WITH @@@@@235-6199@@@@@
AN ATTACHMENT

i02238554 SEBP5027

2333126 INSTALLATION GP-LIGHTING Parts scheme

For full view, you need register

Parts for your 120M MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8K-1433	[1]	GROMMET
2.	234-4326 Y	[2]	LAMP GP-FLOOD (24-VOLT)(WORK LIGHTS)
3.	354-8028	[1]	SWITCH GP-LIGHT (FOG LIGHT, REAR)
	284-3619	[1]	SWITCH AS-ROCKER (24-VOLT)(FOG LIGHT, REAR)
4.	290-2016 Y	[1]	MOUNTING GP-LAMP
	Y		SEPARATE ILLUSTRATION

#SEBP50270258

238-8827: INSTALLATION GP-SECURITY

INSTALLATION GP-SECURITY

238-8827 INSTALLATION GP-SECURITY -MACHINE SECURITY SYSTEM
S/N B9W1-UP
AN ATTACHMENT

i02203699 SEBP5027

2388827 INSTALLATION GP-SECURITY Parts scheme

For full view, you need register

Parts for your 120M MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
2.	3S-2093	[2]	STRAP-CABLE
3.	198-5389	[1]	FILM-IDENTIFICATION (IGNITION SWITCH)
4.	205-0826	[1]	FILM-INSTRUCTION (MACHINE SECURITY, CONSOLE)
5.	206-5162 J	[2]	KEY AS-ELECTRONIC (SECURITY)
6.	206-5208	[1]	COIL AS (EXCITER)
	102-8802	[2]	KIT-RECEPTACLE (2-PIN)
			(EACH INCLUDES RECEPTACLE AS & WEDGE)
	205-8257	[1]	COIL AS (EXCITER)
7.	218-0404	[1]	MODULE GP-INTERFACE (KEY)(MACHINE SECURITY SYSTEM)
8.	219-6314	[2]	KEY RING (IDENTIFICATION)
11.	238-8813	[1]	HARNESS AS-CHASSIS (MACHINE SECURITY SYSTEM)
	8T-8729	[6]	PIN-CONNECTOR (16-GA TO 20-GA)
	8T-8730	[10]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	8T-8737	[2]	PLUG-SEAL
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	155-2265	[1]	KIT-CONNECTING PLUG (8-PIN)
	155-2270	[2]	KIT-CONNECTING PLUG (2-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS,WEDGE,& INTERFACE SEAL)
12.	242-3282	[1]	LAMP AS-LED (24-VOLT, RED)
14.	204-0813	[2]	BOLT (M6X1X40-MM)
15.	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
16.	8C-5607	[4]	MOUNT-ISOLATION
17.	8C-5608	[2]	SPACER (6.5X9.5X25.4-MM THK)
18.	9X-6165	[4]	WASHER (6.5X22X2.5-MM THK)
	J		REQUIRES CORPORATE KEY

#SEBP50270259

233-3127: INSTALLATION GP-WARNING BEACON

INSTALLATION GP-WARNING BEACON

233-3127 INSTALLATION GP-WARNING BEACON
S/N B9W1-UP
PART OF 261-0152, 321-2935 SNOW AR-MOTOR GRADER
AN ATTACHMENT

i02186101 SEBP5027

2333127 INSTALLATION GP-WARNING BEACON Parts scheme

For full view, you need register

Parts for your 120M MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	235-6195	[1]	BRACKET AS
	7T-1099	[2]	LINK
	130-5300	[1]	CLIP
2.	237-9736	[1]	SWITCH AS-ROCKER (WARNING BEACON)

Information:

ELECTRICAL AND STARTING SYSTEM

HARNESS GP

Special Instruction

Retrofitting a Right Hand Stamped Door with Heated Glass on Certain M Series, M Series 2, and M Series 3 Motor Graders {1408, 7305, 7308, 7310}
Retrofitting a Right Hand Stamped Door with Heated Glass on Certain M Series, M Series 2, and M Series 3 Motor Graders {1408, 7305, 7308, 7310}

Retrofit for the Heated Glass Wiring on Certain M, M-Series 2, and M-Series 3 Motor Graders with Pre-Phase I Cabs {1408, 7305, 7308, 7310}
Retrofit for the Heated Glass Wiring on Certain M, M-Series 2, and M-Series 3 Motor Graders with Pre-Phase I Cabs {1408, 7305, 7308, 7310}

Installation Procedure for the 192-7805 Seat Compressor Harness{1408, 7312, 7324}
Installation Procedure for the 192-7805 Seat Compressor Harness{1408, 7312, 7324}

Connector Identification, Removal, Disassembly, Reassembly, and Installation for All Cat® Products Equipped with BR Series Connectors {1408}
Connector Identification, Removal, Disassembly, Reassembly, and Installation for All Cat^® Products Equipped with BR Series Connectors {1408}

Procedure to Replace Armature of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Armature of Starter Motor On All Cat^® Products {1408, 1450, 1453}

Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat^® Products {1408, 1450, 1453}

Tool Operating Manual

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}

Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}

Reuse And Salvage Guidelines

Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}

Service Magazine

Heated Anti-Icing Glass is Now Available for Certain M and M Series 2 Motor Graders {1408, 7305, 7308, 7310}
2011/12/26

Improvements Have Been Made to the Steering Position Sensing System on Certain M Series Motor Graders {1408, 430S, 7620}
2011/12/14

Grommets for Antenna Wires are Now Available for Certain Motor Graders {1408, 7301, 733B}
Grommets for Antenna Wires are Now Available for Certain Motor Graders {1408, 7301, 733B}

Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}

A New Harness and Relay is Now Used on Certain Motor Graders {1408}
A New Harness and Relay is Now Used on Certain Motor Graders {1408}

Caterpillar Parts SIS Catalog 120M :

474-5410 HARNESS AS-SENSOR

448-1938 HARNESS AS-SENSOR

200-5728 HARNESS AS-RADIO

553-2611 HARNESS AS-LIGHTING

308-9323 HARNESS AS-LIGHTING

369-0950 HARNESS AS-CHASSIS

559-8198 HARNESS AS-CAB

524-2229 HARNESS AS-CAB

324-3355 HARNESS AS-WIRING

555-0489 HARNESS AS-WIRING

255-1336 HEATER GP-JACKET WATER

255-1337 HEATER GP-JACKET WATER

235-6188 INSTALLATION AR-COMMUNICATION

373-6739 INSTALLATION AR-COMMUNICATION

233-3126 INSTALLATION GP-LIGHTING

238-8827 INSTALLATION GP-SECURITY

Truck sale:

212,000

Caterpillar 120M2, Construction
- motor graders

317,000

Caterpillar 120M2, Construction
- motor graders
HOLT CAT

On Request

Caterpillar 120M2, Construction
- motor graders
BERGERAT MONNOYEUR S.A.S.
France

Caterpillar 120M2, Construction
- motor graders
KELLY TRACTOR CO.