HYDRAULIC SYSTEM
CYLINDER GPDRIVE GP
HYDRAULIC GP
HYDRAULIC SYSTEM
CYLINDER GP#SEBP50270780
326-2227: CYLINDER GP-RIPPER
326-2227 CYLINDER GP-RIPPER
S/N B9W209-UP
110-MM (4.33-IN) BORE X 383.5 (15.1-IN) STROKE
PART OF 373-9120 RIPPER AR
AN ATTACHMENT
S/N B9W209-UP
110-MM (4.33-IN) BORE X 383.5 (15.1-IN) STROKE
PART OF 373-9120 RIPPER AR
AN ATTACHMENT
Parts for your 120M MOTOR GRADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 5J-7865 J | [1] | RING-BACKUP | |
2. | 9X-7301 J | [1] | SEAL AS | |
3. | 175-7901 J | [1] | SEAL-O-RING | |
4. | 233-0619 J | [1] | SEAL-WIPER | |
5. | 266-9389 | [1] | PISTON | |
6. | 266-9967 | [1] | HEAD | |
7. | 310-2186 J | [1] | SEAL-O-RING | |
8. | 329-5113 | [1] | CYLINDER AS | |
9. | 329-5116 | [1] | ROD AS | |
10. | 119-5434 J | [1] | RING | |
11. | 141-0709 J | [1] | RING-WEAR | |
12. | 167-2183 J | [1] | SEAL AS-BUFFER | |
13. | 167-2303 J | [1] | SEAL-U-CUP | |
14. | 2K-0512 | [1] | LOCKNUT | |
AVAILABLE REPAIR KIT(S): | ||||
417-3698 J | [1] | KIT-HYD CYLINDER SEAL | ||
J | KIT MARKED J SERVICES PART(S) MARKED J | |||
R | REMANUFACTURED PART MAY BE AVAILABLE |
#SEBP50270781
165-2510: CYLINDER GP-SCARIFIER
165-2510 CYLINDER GP-SCARIFIER
S/N B9W1-193
76.2-MM (3-IN) BORE X 406.5-MM (16-IN) STROKE
PART OF 8W-2913 CYLINDER & MTG GP-SCARIFIER
AN ATTACHMENT
S/N B9W1-193
76.2-MM (3-IN) BORE X 406.5-MM (16-IN) STROKE
PART OF 8W-2913 CYLINDER & MTG GP-SCARIFIER
AN ATTACHMENT
Parts for your 120M MOTOR GRADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 9T-4211 | [1] | PISTON | |
2. | 168-9108 | [1] | CYLINDER AS | |
3. | 168-9110 | [1] | ROD AS | |
4. | 184-9843 | [1] | HEAD | |
5. | 167-2190 J | [1] | SEAL AS-BUFFER | |
6. | 167-2300 | [1] | SEAL-U-CUP | |
7. | 231-3539 | [1] | SEAL-WIPER | |
8. | 173-9779 M | [1] | BOLT (M24X3X80-MM) | |
9. | 175-7896 J | [1] | SEAL-O-RING | |
10. | 4T-6907 J | [1] | RING-WEAR | |
11. | 6J-1972 J | [1] | SEAL AS | |
12. | 6J-5731 J | [1] | RING-BACKUP | |
13. | 6J-5733 J | [1] | RING-WEAR | |
14. | 6V-8237 | [1] | WASHER (26X44X4-MM THK) | |
AVAILABLE REPAIR KIT(S): | ||||
376-9017 J | [1] | KIT-SEAL (HYDRAULIC CYLINDER) | ||
(INCLUDES RINGS & SEALS) | ||||
(FOR USE WITH REHS1392) | ||||
J | KIT MARKED J SERVICES PART(S) MARKED J | |||
M | METRIC PART |
#SEBP50270782
165-2510: CYLINDER GP-SCARIFIER
165-2510 CYLINDER GP-SCARIFIER
S/N B9W194-UP
76.2-MM (3-IN) BORE X 406.5-MM (16-IN) STROKE
PART OF 8W-2913 CYLINDER & MTG GP-SCARIFIER
AN ATTACHMENT
S/N B9W194-UP
76.2-MM (3-IN) BORE X 406.5-MM (16-IN) STROKE
PART OF 8W-2913 CYLINDER & MTG GP-SCARIFIER
AN ATTACHMENT
Parts for your 120M MOTOR GRADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 9T-4211 | [1] | PISTON | |
2. | 168-9108 | [1] | CYLINDER AS | |
3. | 168-9110 | [1] | ROD AS | |
4. | 184-9843 | [1] | HEAD | |
5. | 167-2190 J | [1] | SEAL AS-BUFFER | |
6. | 439-4526 CJ | [1] | SEAL-U-CUP | |
7. | 308-1880 CJ | [1] | SEAL-WIPER | |
8. | 173-9779 M | [1] | BOLT (M24X3X80-MM) | |
9. | 175-7896 J | [1] | SEAL-O-RING | |
10. | 4T-6907 J | [1] | RING-WEAR | |
11. | 9X-7337 J | [1] | SEAL AS | |
12. | 6J-5731 J | [1] | RING-BACKUP | |
13. | 6J-5733 J | [1] | RING-WEAR | |
14. | 6V-8237 | [1] | WASHER (26X44X4-MM THK) | |
AVAILABLE REPAIR KIT(S): | ||||
376-9017 J | [1] | KIT-SEAL (HYDRAULIC CYLINDER) | ||
(INCLUDES RINGS & SEALS) | ||||
(FOR USE WITH REHS1392) | ||||
C | CHANGE FROM PREVIOUS TYPE | |||
J | KIT MARKED J SERVICES PART(S) MARKED J | |||
M | METRIC PART |
#SEBP50270783
249-4116: CYLINDER GP-SIDESHIFT
249-4116 CYLINDER GP-SIDESHIFT
S/N B9W1-UP
76.2-MM(3-IN) BORE X 1175-MM(46-IN) STROKE
PART OF 246-6115 CYLINDER & MTG GP-SIDESHIFT
FIELD REPLACEMENT ORDER @@@@@509-6993@@@@@
S/N B9W1-UP
76.2-MM(3-IN) BORE X 1175-MM(46-IN) STROKE
PART OF 246-6115 CYLINDER & MTG GP-SIDESHIFT
FIELD REPLACEMENT ORDER @@@@@509-6993@@@@@
Parts for your 120M MOTOR GRADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 249-4117 | [1] | CYLINDER AS | |
2. | 8T-0667 M | [1] | BOLT (M24X3X100-MM) | |
3. | 150-1280 | [1] | WASHER-HARD (26X44X22-MM THK) | |
4. | 9T-4211 | [1] | PISTON | |
5. | 175-7896 J | [1] | SEAL-O-RING | |
6. | 6J-5731 J | [1] | RING-BACKUP | |
7. | 249-4120 | [1] | ROD AS | |
8. | 184-9843 | [1] | HEAD | |
9. | 308-1880 J | [1] | SEAL-WIPER | |
10. | 351-8628 J | [1] | SEAL-U-CUP | |
11. | 167-2190 J | [1] | SEAL AS-BUFFER | |
12. | 4T-6907 J | [1] | RING-WEAR | |
13. | 6J-5733 J | [1] | RING-WEAR | |
14. | 6J-1972 J | [1] | SEAL AS | |
AVAILABLE REPAIR KIT(S): | ||||
376-9017 J | [1] | KIT-SEAL (HYDRAULIC CYLINDER) | ||
(INCLUDES RINGS & SEALS) | ||||
(FOR USE WITH REHS1392) | ||||
J | KIT MARKED J SERVICES PART(S) MARKED J | |||
M | METRIC PART | |||
R | REMANUFACTURED PART MAY BE AVAILABLE |
#SEBP50270784
509-6993: CYLINDER GP-SIDESHIFT
509-6993 CYLINDER GP-SIDESHIFT
S/N B9W1-UP
76.2-MM (3-IN) BORE X 1175-MM (46.3-IN) STROKE
FIELD REPLACEMENT FOR 249-4116
S/N B9W1-UP
76.2-MM (3-IN) BORE X 1175-MM (46.3-IN) STROKE
FIELD REPLACEMENT FOR 249-4116
Parts for your 120M MOTOR GRADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 4T-6907 | [1] | RING-WEAR | |
2. | 6J-1972 | [1] | SEAL AS | |
3. | 6J-5731 | [1] | RING-BACKUP | |
4. | 6J-5733 | [1] | RING-WEAR | |
5. | 9T-4211 | [1] | PISTON | |
6. | 167-2190 | [1] | SEAL AS-BUFFER | |
7. | 175-7896 | [1] | SEAL-O-RING | |
8. | 184-9843 | [1] | HEAD | |
9. | 249-4120 | [1] | ROD AS | |
10. | 308-1880 | [1] | SEAL-WIPER | |
11. | 439-4526 | [1] | SEAL-U-CUP | |
12. | 509-6994 | [1] | CYLINDER AS | |
13. | 150-1280 | [1] | WASHER-HARD (26X44X22-MM THK) | |
14. | 8T-0667 M | [1] | BOLT (M24X3X100-MM) | |
M | METRIC PART | |||
R | REMANUFACTURED PART MAY BE AVAILABLE |
#SEBP50270785
262-5766: CYLINDER GP-STEERING
262-5766 CYLINDER GP-STEERING
S/N B9W1-UP
76.2-MM (3-IN) BORE X 305-MM (12-IN) STROKE
PART OF 260-8709 CYLINDER & MTG GP-STEERING
S/N B9W1-UP
76.2-MM (3-IN) BORE X 305-MM (12-IN) STROKE
PART OF 260-8709 CYLINDER & MTG GP-STEERING
Parts for your 120M MOTOR GRADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 8T-8737 | [1] | PLUG-SEAL | |
2. | 102-2244 | [1] | GROMMET | |
3. | 151-7038 | [1] | HEAD | |
4. | 212-0907 | [1] | PLATE-CONNECTOR | |
5. | 214-6480 | [1] | PISTON | |
6. | 217-3311 | [1] | MAGNET (RING) | |
7. | 276-1816 | [1] | GUARD | |
8. | 242-9514 | [1] | CARRIER | |
9. | 242-9515 | [1] | RING-RETAINING | |
10. | 262-5768 | [1] | CYLINDER AS | |
11. | 262-5769 | [1] | ROD AS | |
12. | 289-2935 | [1] | SEAL AS-BUFFER | |
13. | 289-2946 | [1] | SEAL-U-CUP | |
14. | 188-2199 | [1] | SEAL-O-RING | |
15. | 1H-7339 | [1] | SEAL-O-RING | |
16. | 215-1942 | [1] | RING-BACKUP | |
17. | 223-3353 | [1] | RING-WEAR | |
18. | 308-1845 | [1] | SEAL-WIPER | |
19. | 262-5906 | [1] | SENSOR GP-POSITION (STEERING CYLINDER) | |
9X-3401 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
20. | 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | |
(INCLUDES RECEPTACLE AS & WEDGE) | ||||
21. | 3V-2431 | [2] | WASHER (10.2X16X2-MM THK) | |
22. | 4S-5565 | [2] | BOLT (3/8-16X0.875-IN) | |
23. | 4T-5613 | [1] | RING-WEAR | |
24. | 5J-4561 | [1] | LOCKNUT (1-14-THD) | |
25. | 6J-1972 | [1] | SEAL AS | |
27. | 6J-5731 | [1] | RING-BACKUP | |
28. | 8T-5070 | [1] | SETSCREW-SOCKET (3/8-16X0.5-IN) | |
30. | 9X-1386 E | SLEEVE (8.5-CM) | ||
30A. | 9X-1386 E | SLEEVE (3-CM) | ||
31. | 162-0177 | [1] | PLUG AS | |
9S-8004 | [1] | PLUG (9/16-18-THD) | ||
3J-1907 | [1] | SEAL-O-RING | ||
E | ORDER BY THE CENTIMETER |
#SEBP50270786
249-5299: CYLINDER GP-WHEEL LEAN
249-5299 CYLINDER GP-WHEEL LEAN
S/N B9W1-UP
88.9-MM (3.5-IN) BORE X 149-MM (5.87-IN) STROKE
PART OF 260-8713 CYLINDER & MTG GP-WHEEL LEAN
S/N B9W1-UP
88.9-MM (3.5-IN) BORE X 149-MM (5.87-IN) STROKE
PART OF 260-8713 CYLINDER & MTG GP-WHEEL LEAN
Parts for your 120M MOTOR GRADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 251-1550 | [1] | CYLINDER AS | |
1A. | 2G-8631 | [1] | BUSHING | |
2. | 173-9683 M | [1] | BOLT (M30X3.5X90-MM) | |
3. | 9X-8399 | [1] | WASHER (33X56X6-MM THK) | |
4. | 4T-8054 J | [1] | SEAL AS | |
5. | 7J-9885 J | [1] | RING-WEAR | |
6. | 9T-9040 | [1] | PISTON | |
7. | 175-7898 J | [1] | SEAL-O-RING | |
8. | 1S-0669 J | [1] | RING (BACKUP) | |
9. | 6E-4974 | [1] | HEAD | |
308-1845 | [1] | SEAL-WIPER | ||
10. | 121-9245 | [1] | ROD AS | |
10A. | 2G-8631 | [1] | BUSHING | |
11. | 308-1845 J | [1] | SEAL-WIPER | |
12. | 356-8331 J | [1] | SEAL-U-CUP | |
13. | 289-2935 J | [1] | SEAL AS-BUFFER | |
14. | 4T-5613 J | [1] | RING-WEAR | |
AVAILABLE REPAIR KIT(S): | ||||
376-9011 J | [1] | KIT-HYD CYLINDER SEAL | ||
(INCLUDES RINGS & SEALS) | ||||
(FOR USE WITH REHS1392) | ||||
J | KIT MARKED J SERVICES PART(S) MARKED J | |||
M | METRIC PART | |||
R | REMANUFACTURED PART MAY BE AVAILABLE |
#SEBP50270787
253-4677: DRIVE GP-CIRCLE
Parts for your 120M MOTOR GRADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 1B-4038 | [2] | CUP-BEARING | |
2. | 1B-4046 | [2] | CONE-BEARING | |
3. | 2G-0478 | [5] | PLATE-CLUTCH | |
4. | 2G-6695 | [1] | BRACKET | |
5. | 5K-5288 | [1] | SEAL GP-DUO-CONE | |
5K-5129 | [2] | RING-SEALING | ||
6. | 6G-5533 | [1] | GEAR-WORM (36-TEETH) | |
7. | 6G-5534 | [1] | COVER AS | |
6G-5537 | [1] | BEARING | ||
8. | 6G-5538 | [1] | COVER | |
9. | 6G-5542 | [2] | SPACER (119.2X178X9.3-MM THK) | |
10. | 6G-6122 | [1] | SPRING-DISC | |
11. | 6Y-7953 | [6] | DISC-FRICTION | |
12. | 7D-8983 B | [10] | SHIM (0.005-IN THK) | |
13. | 7D-8984 B | [6] | SHIM (0.007-IN THK) | |
14. | 8D-7423 | [1] | WASHER-SPECIAL (81.03X48.41X1.6MM THK) | |
15. | 8D-7424 | [1] | SPACER (48X81X6-MM THK) | |
16. | 8T-0336 | [1] | FITTING-PRESSURE RELIEF | |
17. | 312-0782 | [1] | WORM-CIRCLE DRIVE | |
18. | 9D-1491 | [1] | COUPLING | |
19. | 105-3196 Y | [1] | MOTOR GP-GEROTOR (CIRCLE DRIVE) | |
20. | 253-4678 | [1] | HOUSING AS-DRIVE | |
2D-8154 | [4] | STUD-TAPERLOCK (1/2-13X2.36-IN) | ||
8D-7426 | [1] | BUSHING | ||
160-0011 M | [4] | STUD-TAPERLOCK (M20X2.5X85-MM) | ||
21. | 261-8553 | [1] | PINION-CIRCLE DRIVE | |
22. | 307-1958 | [1] | SHAFT-PINION DRIVE | |
23. | 307-1959 B | [6] | SHIM (0.13-MM THK)(0.2-MM THK) | |
24. | 307-1960 B | [1] | SHIM (0.25-MM THK)(0.3-MM THK) | |
25. | 307-1961 | [1] | PLATE | |
26. | 307-1962 B | [4] | SHIM (0.5-MM THK)(0.5-MM THK) | |
27. | 0S-1585 | [4] | BOLT (1/2-13X1.5-IN) | |
28. | 1A-1415 | [1] | NUT (1-7/8-12-THD) | |
29. | 1B-5174 | [1] | PLUG-PIPE | |
30. | 1F-7958 | [4] | NUT-FULL (1/2-13-THD) | |
31. | 1H-7339 | [1] | SEAL-O-RING | |
32. | 2B-7410 | [1] | PLUG-PIPE (OIL DRAIN) | |
33. | 2H-9247 | [1] | SEAL-O-RING | |
34. | 4F-9653 | [1] | SEAL-O-RING | |
35. | 4H-6996 | [1] | PIN-SPRING | |
36. | 5H-4909 | [1] | SEAL-O-RING | |
37. | 5K-8454 | [3] | BOLT (1/2-13X1.12-IN) | |
38. | 5P-8245 | [16] | WASHER-HARD (13.5X25.5X3-MM THK) | |
39. | 5S-7379 | [4] | BOLT (3/8-16X0.875-IN) | |
40. | 6G-5539 | [1] | GASKET | |
41. | 6G-5548 | [1] | SPACER (69.5X89X0.8-MM THK) | |
42. | 6H-1717 | [5] | BOLT (1/2-13X1.125-IN) | |
43. | 6V-5686 M | [3] | BOLT (M16X2X50-MM) | |
44. | 8D-5054 | [3] | WASHER-HARD (17X30X3-MM THK) | |
45. | 8D-7425 | [2] | WASHER-THRUST (2.81X4.25X0.12-IN THK) | |
46. | 8T-4896 | [4] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
B | USE AS REQUIRED | |||
M | METRIC PART | |||
R | REMANUFACTURED PART MAY BE AVAILABLE | |||
Y | SEPARATE ILLUSTRATION |
#SEBP50270788
253-4677: DRIVE GP-CIRCLE
Parts for your 120M MOTOR GRADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 1B-4038 | [2] | CUP-BEARING | |
2. | 1B-4046 | [2] | CONE-BEARING | |
3. | 2G-0478 | [5] | PLATE-CLUTCH | |
4. | 2G-6695 | [1] | BRACKET | |
5. | 5K-5288 | [1] | SEAL GP-DUO-CONE | |
5K-5129 | [2] | RING-SEALING | ||
6. | 323-8674 C | [1] | GEAR-WORM (36-TEETH) | |
7. | 6G-5534 | [1] | COVER AS | |
6G-5537 | [1] | BEARING | ||
8. | 6G-5538 | [1] | COVER | |
9. | 6G-5542 | [2] | SPACER (119.2X178X9.3-MM THK) | |
10. | 6G-6122 | [1] | SPRING-DISC | |
11. | 6Y-7953 | [6] | DISC-FRICTION | |
12. | 7D-8983 B | [10] | SHIM (0.005-IN THK) | |
13. | 7D-8984 B | [6] | SHIM (0.007-IN THK) | |
14. | 8D-7423 | [1] | WASHER-SPECIAL (81.03X48.41X1.6MM THK) | |
15. | 8D-7424 | [1] | SPACER (48X81X6-MM THK) | |
16. | 8T-0336 | [1] | FITTING-PRESSURE RELIEF | |
17. | 323-8675 C | [1] | WORM-CIRCLE DRIVE | |
18. | 9D-1491 | [1] | COUPLING | |
19. | 105-3196 Y | [1] | MOTOR GP-GEROTOR (CIRCLE DRIVE) | |
20. | 253-4678 | [1] | HOUSING AS-DRIVE | |
2D-8154 | [4] | STUD-TAPERLOCK (1/2-13X2.36-IN) | ||
8D-7426 | [1] | BUSHING | ||
286-2631 M | [4] | STUD-TAPERLOCK (M20X2.5X85-MM) | ||
21. | 261-8553 | [1] | PINION-CIRCLE DRIVE | |
22. | 307-1958 | [1] | SHAFT-PINION DRIVE | |
23. | 307-1959 B | [6] | SHIM (0.13-MM THK) | |
24. | 307-1960 B | [1] | SHIM (0.25-MM THK) | |
25. | 307-1961 | [1] | PLATE | |
26. | 307-1962 B | [4] | SHIM (0.5-MM THK) | |
27. | 0S-1585 | [4] | BOLT (1/2-13X1.5-IN) | |
28. | 1A-1415 | [1] | NUT (1-7/8-12-THD) | |
29. | 1B-5174 | [1] | PLUG-PIPE | |
30. | 1F-7958 | [4] | NUT-FULL (1/2-13-THD) | |
31. | 1H-7339 | [1] | SEAL-O-RING | |
32. | 2B-0858 | [1] | PLUG-PIPE (OIL DRAIN) | |
33. | 2H-9247 | [1] | SEAL-O-RING | |
34. | 4F-9653 | [1] | SEAL-O-RING | |
35. | 4H-6996 | [1] | PIN-SPRING | |
36. | 5H-4909 | [1] | SEAL-O-RING | |
37. | 5K-8454 | [3] | BOLT (1/2-13X1.12-IN) | |
38. | 5P-8245 | [16] | WASHER-HARD (13.5X25.5X3-MM THK) | |
39. | 5S-7379 | [4] | BOLT (3/8-16X0.875-IN) | |
40. | 6G-5539 | [1] | GASKET | |
41. | 6G-5548 | [1] | SPACER (69.5X89X0.8-MM THK) | |
42. | 6H-1717 | [5] | BOLT (1/2-13X1.125-IN) | |
43. | 6V-5686 M | [3] | BOLT (M16X2X50-MM) | |
44. | 8D-5054 | [3] | WASHER-HARD (17X30X3-MM THK) | |
45. | 8D-7425 | [2] | WASHER-THRUST (2.81X4.25X0.12-IN THK) | |
46. | 8T-4896 | [4] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
B | USE AS REQUIRED | |||
C | CHANGE FROM PREVIOUS TYPE | |||
M | METRIC PART | |||
R | REMANUFACTURED PART MAY BE AVAILABLE | |||
Y | SEPARATE ILLUSTRATION |
#SEBP50270789
265-9049: FAN AR-HYDRAULIC
265-9049 FAN AR-HYDRAULIC -ALL WHEEL DRIVE
S/N B9W1-UP
HIGH AMBIENT TEMPERATURE COOLING
PART OF 321-2927, 349-2549 COMMON AR
S/N B9W1-UP
HIGH AMBIENT TEMPERATURE COOLING
PART OF 321-2927, 349-2549 COMMON AR
Parts for your 120M MOTOR GRADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
246-7097 Y | [1] | FAN & MOTOR GP | ||
246-6094 Y | [1] | LINES GP-HYDRAULIC FAN | ||
S/N B9W1-160 | ||||
332-3943 Y | [1] | LINES GP-HYDRAULIC FAN (PISTON) | ||
S/N B9W161-UP | ||||
246-6103 Y | [1] | PUMP & MTG GP-PISTON (BRAKE, HYDRAULIC FAN) | ||
267-6246 Y | [1] | WIRING GP-FAN | ||
S/N B9W1-160 | ||||
Y | SEPARATE ILLUSTRATION |
Information:
HYDRAULIC SYSTEM
CYLINDER GP
Operation and Maintenance Manual
Special Instruction
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
A Procedure to Calibrate the Steering on Certain Motor Graders{430S, 4313, 4343, 7300, 7451, 7506}
A Procedure to Calibrate the Steering on Certain Motor Graders{430S, 4313, 4343, 7300, 7451, 7506}
A Procedure to Calibrate the Steering on Certain Motor Graders{430S, 4313, 4343, 7300, 7451, 7506}
Procedure to Rework the Scarifier Bracket Group on Certain Motor Graders{5213, 6162}
Procedure to Rework the Scarifier Bracket Group on Certain Motor Graders{5213, 6162}
Procedure to Rework the Scarifier Bracket Group on Certain Motor Graders{5213, 6162}
Front Axle Steering Cylinder Hose Guard for Certain M Series Motor Graders{7164}
Front Axle Steering Cylinder Hose Guard for Certain M Series Motor Graders{7164}
Front Axle Steering Cylinder Hose Guard for Certain M Series Motor Graders{7164}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Instructions For Installing Steering Cylinders With Position Sensors On Certain Motor Graders {4303, 7620}
Instructions For Installing Steering Cylinders With Position Sensors On Certain Motor Graders {4303, 7620}
Instructions For Installing Steering Cylinders With Position Sensors On Certain Motor Graders {4303, 7620}
Technical Information Bulletin
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Drifting May Occur in the Articulation System on Certain M, M Series 2, and M Series 3 Motor Graders {5265}
Drifting May Occur in the Articulation System on Certain M, M Series 2, and M Series 3 Motor Graders {5265}
Drifting May Occur in the Articulation System on Certain M, M Series 2, and M Series 3 Motor Graders {5265}
Specifications
Tool Operating Manual
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Manual Length Measurement and Calibration of Position Sensors for Steering Cylinders {0738, 0759, 4303}
Manual Length Measurement and Calibration of Position Sensors for Steering Cylinders {0738, 0759, 4303}
Manual Length Measurement and Calibration of Position Sensors for Steering Cylinders {0738, 0759, 4303}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Contamination Control Guidelines
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Testing and Adjusting
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the
Troubleshooting
MID 082 - CID 2200 - FMI 00
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
MID 082 - CID 2200 - FMI 03
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
MID 082 - CID 2200 - FMI 04
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
MID 082 - CID 2200 - FMI 08
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
MID 082 - CID 2200 - FMI 13
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
MID 082 - CID 2201 - FMI 02
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
MID 082 - CID 2200 - FMI 02
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
MID 082 - CID 2201 - FMI 03
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
MID 082 - CID 2201 - FMI 04
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
MID 082 - CID 2201 - FMI 08
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
MID 082 - CID 2201 - FMI 13
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
MID 082 - CID 2200 - FMI 01
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
MID 082 - CID 2201 - FMI 00
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
MID 082 - CID 2201 - FMI 01
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
MID 082 - CID 2200 - FMI 14
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
MID 082 - CID 2201 - FMI 14
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
MID 027 - CID 2200 - FMI 00
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
MID 027 - CID 2200 - FMI 01
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
MID 027 - CID 2200 - FMI 02
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
MID 027 - CID 2200 - FMI 03
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
MID 027 - CID 2200 - FMI 04
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
MID 027 - CID 2200 - FMI 08
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
MID 027 - CID 2200 - FMI 13
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
MID 027 - CID 2200 - FMI 14
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
MID 027 - CID 2201 - FMI 00
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
MID 027 - CID 2201 - FMI 01
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
MID 027 - CID 2201 - FMI 02
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
MID 027 - CID 2201 - FMI 03
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
MID 027 - CID 2201 - FMI 04
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
MID 027 - CID 2201 - FMI 08
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
MID 027 - CID 2201 - FMI 13
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
MID 027 - CID 2201 - FMI 14
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
Disassembly and Assembly
Service Magazine
Blade Lift Modulation that is Selectable is Available {5063, 5102, 7300, 7451, 7610, 7620}
2009/09/07
2009/09/07
Optional Guards are Now Available for Certain M Series and M Series 2 Motor Graders {7164}
2013/06/04
2013/06/04
Steering Cylinder Bearing Bore Specifications Have Been Updated on Certain Motor Graders {4303}
2011/12/23
2011/12/23
The Assembly Procedure For The Blade Lift Cylinder Has Been Improved On Certain Motor Graders {5102}
2015/02/27
2015/02/27
New Steering Cylinders With Position Sensors are Now Available on Certain Motor Graders {4303, 7620}
New Steering Cylinders With Position Sensors are Now Available on Certain Motor Graders {4303, 7620}
New Steering Cylinders With Position Sensors are Now Available on Certain Motor Graders {4303, 7620}
Improved Blade Lift Cylinder Yoke Bolts Are Now Used On Certain K and M Series Motor Graders {5102}
Improved Blade Lift Cylinder Yoke Bolts Are Now Used On Certain K and M Series Motor Graders {5102}
Improved Blade Lift Cylinder Yoke Bolts Are Now Used On Certain K and M Series Motor Graders {5102}