OPERATOR STATION
SUPPORT GPSEAT GP
WASHER GP-WINDOW
CAB GP
WINDOW GP
OPERATOR STATION
SUPPORT GP
#SEBP50271130
345-1272: SUPPORT GP-CONTROL
345-1272 SUPPORT GP-CONTROL -JOYSTICK, LH
S/N B9W1-UP
PART OF 345-1277 CONTROL & MTG GP-JOYSTICK
AN ATTACHMENT
S/N B9W1-UP
PART OF 345-1277 CONTROL & MTG GP-JOYSTICK
AN ATTACHMENT
For full view, you need register
Parts for your 120M MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 172-8591 M | [10] | NUT-CLIP (M6X1-THD) | |
| 2. | 8X-1386 | [1] | SPACER (12.2X23X22-MM THK) | |
| 3. | 233-3227 | [1] | SUPPORT AS (LH) | |
| 4. | 233-3248 | [2] | BUSHING | |
| 5. | 233-3252 | [1] | SHAFT AS | |
| 6. | 251-2247 | [1] | GROMMET | |
| 7. | 252-1805 Y | [1] | CUSHION GP-ARM | |
| 8. | 252-1807 | [1] | SUPPORT AS (LH) | |
| 3G-0622 | [2] | RING-RETAINING | ||
| 7X-0605 | [2] | WASHER-HARD (13X28X1.6-MM THK) | ||
| 9X-2044 M | [2] | SCREW-TRUSS HEAD (M6X1X16-MM) | ||
| 114-6658 | [2] | WASHER (6.5X17X1-MM THK) | ||
| 294-1001 | [1] | PLATE AS | ||
| 6V-9632 M | [2] | NUT-WELD (M6X1-THD) | ||
| 9. | 253-3482 | [1] | KNOB AS (ARMREST ADJUSTMENT) | |
| 10. | 253-3483 | [1] | PLATE AS | |
| 11. | 253-3484 | [2] | WASHER (13X46X3.5-MM THK) | |
| 12. | 272-8329 | [1] | BRACKET AS (LH) | |
| 13. | 292-0617 Y | [1] | ARMREST GP (LH) | |
| 14. | 456-1559 | [1] | ADJUSTER AS | |
| 15. | 345-1275 | [1] | COVER | |
| 16. | 345-1276 | [1] | COVER | |
| 17. | 346-0627 | [1] | BRACKET | |
| 18. | 346-9580 | [1] | FILM-IDENTIFICATION (OPERATOR CONTROLS, LH) | |
| 19. | 114-6658 | [10] | WASHER (6.5X17X1-MM THK) | |
| 20. | 5C-9553 M | [2] | BOLT (M6X1X16-MM) | |
| 21. | 7J-5925 | [1] | PIN-COTTER | |
| 22. | 7X-0578 | [2] | WASHER-HARD (10.2X32X2.5-MM THK) | |
| 23. | 8T-4200 M | [3] | BOLT (M8X1.25X16-MM) | |
| 24. | 8T-4224 | [10] | WASHER-HARD (8.8X16X2-MM THK) | |
| 25. | 8T-4908 M | [7] | BOLT (M8X1.25X25-MM) | |
| 26. | 9X-2043 M | [2] | SCREW-TRUSS HEAD (M6X1X14-MM) | |
| 27. | 9X-2044 M | [10] | SCREW-TRUSS HEAD (M6X1X16-MM) | |
| 28. | 9X-8256 | [2] | WASHER (6.6X12X2-MM THK) | |
| 29. | 8T-6936 D | SEAL (0.1-M EACH) | ||
| D | ORDER BY THE METER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP50271131
160-7165: SUSPENSION GP-SEAT
160-7165 SUSPENSION GP-SEAT
S/N B9W1-UP
PART OF 243-6740, 504-4302 SEAT GP-SUSPENSION
AN ATTACHMENT
S/N B9W1-UP
PART OF 243-6740, 504-4302 SEAT GP-SUSPENSION
AN ATTACHMENT
For full view, you need register
Parts for your 120M MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8Y-6014 | [1] | HOUSING AS (LOWER) | |
| 2. | 174-2231 Y | [1] | HOUSING GP-SEAT SUSPENSION | |
| 3. | 4V-7884 | [2] | BEARING | |
| 4. | 4V-8577 | [4] | BEARING | |
| 5. | 8Y-5944 | [1] | KIT-SUSPENSION BOOT (SEAT) | |
| (INCLUDES BOOT, RETAINERS & FASTENERS) | ||||
| 6. | 8Y-5965 | [1] | ABSORBER AS-SHOCK | |
| 7. | 8Y-6012 | [1] | ARM AS-SUSPENSION | |
| 8. | 8Y-6024 | [2] | SHAFT AS | |
| 9. | 101-4194 | [1] | KIT-TETHER BELT (SUSPENSION SEAT) | |
| (INCLUDES 2 BELTS) | ||||
| 10. | 101-4195 | [1] | KIT-SUSPENSION ROLLER (SUSPENSION SEAT) | |
| (INCLUDES 4 ROLLERS) | ||||
| 11. | 145-0326 | [1] | FILM-INSTRUCTION (SEAT ADJUSTMENT) | |
| 12. | 169-7380 | [1] | BOLT-SOCKET HEAD (3/8-16X0.375-IN) | |
| 13. | 2K-4973 | [2] | LOCKNUT (3/8-16-THD) | |
| 14. | 5V-1497 | [1] | RETAINER | |
| 169-7380 F | [1] | BOLT-SOCKET HEAD (3/8-16X0.375-IN) | ||
| F | NOT SHOWN | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP50271132
256-8768: SUSPENSION GP-SEAT
256-8768 SUSPENSION GP-SEAT -AIR
S/N B9W1-UP
24-VOLT
PART OF 238-6683 SEAT GP-SUSPENSION
Type 1
AN ATTACHMENT
S/N B9W1-UP
24-VOLT
PART OF 238-6683 SEAT GP-SUSPENSION
Type 1
AN ATTACHMENT
For full view, you need register
Parts for your 120M MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3P-9900 | [5] | WASHER (10.5X30X3-MM THK) | |
| 2. | 4B-4278 | [2] | WASHER (10.2X20.5X1.6-MM THK) | |
| 3. | 4V-8577 | [12] | BEARING | |
| 4. | 8L-8413 | [1] | STRAP-CABLE (WHITE) | |
| 5. | 101-0003 | [26] | FASTENER | |
| 6. | 145-0326 | [1] | FILM-INSTRUCTION (SEAT ADJUSTMENT) | |
| 7. | 164-1234 | [1] | PLATE | |
| 8. | 169-7380 | [1] | BOLT-SOCKET HEAD (3/8-16X0.375-IN) | |
| 9. | 186-5107 | [2] | SCREW-DRIVE (NO 8-16X1.25-IN) | |
| 10. | 192-7752 | [4] | SHAFT AS | |
| 11. | 192-7755 | [1] | HOUSING AS (LOWER) | |
| 12. | 192-7760 | [1] | SHAFT | |
| 13. | 192-7767 | [1] | SCISSORS AS | |
| 14. | 192-7783 | [1] | TOGGLE AS (WIDE) | |
| 15. | 192-7787 | [1] | TOGGLE AS (NARROW) | |
| 16. | 192-7790 | [1] | HOUSING AS (UPPER) | |
| 2K-4973 | [1] | LOCKNUT (3/8-16-THD) | ||
| 17. | 192-7795 | [1] | BOOT | |
| 18. | 192-7805 | [1] | HARNESS AS-VALVE (SEAT AIR COMPRESSOR) | |
| 19. | 192-7810 | [1] | SPRING AS-AIR | |
| 163-1135 | [1] | SPRING | ||
| 5P-4423 | [1] | ELBOW | ||
| 20. | 192-7812 | [1] | BOLT-SPECIAL | |
| 21. | 192-7820 | [3] | BUMPER | |
| 22. | 192-7822 | [1] | SHAFT | |
| 23. | 237-3943 | [1] | BRACKET | |
| 24. | 237-3970 Y | [1] | AIR COMPRESSOR GP-SEAT | |
| 25. | 108-4311 | [1] | SCREW-MACHINE (3/8-16X0.75-IN) | |
| 26. | 2K-4973 | [8] | LOCKNUT (3/8-16-THD) | |
| 27. | 3J-4818 | [1] | LOCKWASHER | |
| 28. | 5C-2890 M | [3] | NUT (M6X1-THD) | |
| 29. | 5P-6010 D | TUBE (0.26-M) | ||
| 29A. | 5P-6010 D | TUBE (0.36-M) | ||
| 30. | 8T-9371 | [1] | BOLT (3/8-16X0.5-IN) | |
| 31. | 211-5358 E | CONDUIT-FLEXIBLE (26.7-CM) | ||
| 31A. | 211-5358 E | CONDUIT-FLEXIBLE (35.6-CM) | ||
| AVAILABLE REPAIR KIT(S): | ||||
| 192-7799 | [1] | KIT-AIR VALVE & SWITCH (SEAT) | ||
| (INCLUDES KNOB ASSEMBLY) | ||||
| 212-7779 | [1] | KIT-SHOCK ABSORBER (SUSPENSION SEAT) | ||
| (INCLUDES, LOCKNUTS, BALL, LOCKWASHER, STRAP, SPRING, CLAMP, ADJUSTERS, BOLTS, BEARINGS, WASHERS, SHOCK ABSORBER, | ||||
| BRACKETS, KIT, CABLE AS & KNOB) | ||||
| 213-5170 | [1] | KIT-SEAT ADJUSTER (SEAT ADJUSTMENT) | ||
| (INCLUDES BOLTS, NUTS, ROD, ARM & HOUSING) | ||||
| 211-9294 | [1] | KIT-TETHER (SEAT) | ||
| (INCLUDES TETHER) | ||||
| 212-7783 H | [1] | KIT-PULLEY | ||
| (INCLUDES PIN, PULLEY, RETAINING RING, SETSCREW & SPRING) | ||||
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| H | KIT MARKED H SERVICES 212-7779 KIT-SHOCK ABSORBER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP50271133
256-8768: SUSPENSION GP-SEAT
256-8768 SUSPENSION GP-SEAT -AIR
S/N B9W1-UP
24-VOLT
PART OF 238-6683, 421-1234 SEAT GP-SUSPENSION
Type 2
AN ATTACHMENT
S/N B9W1-UP
24-VOLT
PART OF 238-6683, 421-1234 SEAT GP-SUSPENSION
Type 2
AN ATTACHMENT
For full view, you need register
Parts for your 120M MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3P-9900 | [5] | WASHER (10.5X30X3-MM THK) | |
| 2. | 4B-4278 | [2] | WASHER (10.2X20.5X1.6-MM THK) | |
| 3. | 4V-8577 | [12] | BEARING | |
| 5. | 101-0003 | [26] | FASTENER | |
| 6. | 145-0326 | [1] | FILM-INSTRUCTION (SEAT ADJUSTMENT) | |
| 7. | 164-1234 | [1] | PLATE | |
| 8. | 169-7380 | [1] | BOLT-SOCKET HEAD (3/8-16X0.375-IN) | |
| 10. | 192-7752 | [4] | SHAFT AS | |
| 11. | 192-7755 | [1] | HOUSING AS (LOWER) | |
| 12. | 314-5274 C | [1] | SHAFT (INNER) | |
| 13. | 192-7767 | [1] | SCISSORS AS | |
| 14. | 192-7783 | [1] | TOGGLE AS (WIDE) | |
| 15. | 192-7787 | [1] | TOGGLE AS (NARROW) | |
| 16. | 192-7790 | [1] | HOUSING AS (UPPER) | |
| 17. | 192-7795 | [1] | BOOT | |
| 18. | 433-5754 | [1] | HARNESS AS-WIRING (SEAT AIR COMPRESSOR) | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 5P-4571 | [2] | TERMINAL-BLADE (14-GA TO 16-GA) | ||
| 097-7234 | [2] | TERMINAL-BLADE (18-GA TO 22-GA) | ||
| 9X-3401 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [2] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 1P-0810 B | TAPE-ELECTRICAL | |||
| 329-3734 B | TAPE-ELECTRICAL | |||
| 19. | 192-7810 | [1] | SPRING AS-AIR | |
| 5P-4423 | [1] | ELBOW | ||
| 20. | 192-7812 | [1] | BOLT-SPECIAL | |
| 21. | 192-7820 | [3] | BUMPER | |
| 22. | 314-5275 C | [1] | SHAFT (OUTER) | |
| 25. | 108-4311 | [1] | SCREW-MACHINE (3/8-16X0.75-IN) | |
| 26. | 2K-4973 | [8] | LOCKNUT (3/8-16-THD) | |
| 27. | 3J-4818 | [1] | LOCKWASHER | |
| 28. | 5C-2890 M | [3] | NUT (M6X1-THD) | |
| 29. | 5P-6010 D | TUBE (0.257-M) | ||
| 29A. | 5P-6010 D | TUBE (0.356-M) | ||
| 30. | 8T-9371 | [1] | BOLT (3/8-16X0.5-IN) | |
| 31. | 211-5358 E | CONDUIT-FLEXIBLE (26.7-CM) | ||
| 31A. | 211-5358 E | CONDUIT-FLEXIBLE (35.6-CM) | ||
| 34. | 442-8151 | [1] | CLIP-CABLE | |
| 35. | 3S-2093 | [4] | STRAP-CABLE | |
| AVAILABLE REPAIR KIT(S): | ||||
| 192-7799 | [1] | KIT-AIR VALVE & SWITCH (SEAT) | ||
| (INCLUDES KNOB ASSEMBLY) | ||||
| 212-7779 H | [1] | KIT-SHOCK ABSORBER (SUSPENSION SEAT) | ||
| (INCLUDES, LOCKNUTS, BALL, LOCKWASHER, STRAP, SPRING, CLAMP, ADJUSTERS, BOLTS, BEARINGS, WASHERS, SHOCK ABSORBER, | ||||
| BRACKETS, KIT, CABLE ASSEMBLY & KNOB) | ||||
| 211-9294 | [1] | KIT-TETHER (SEAT) | ||
| (INCLUDES TETHER) | ||||
| 213-5170 | [1] | KIT-SEAT ADJUSTER (SEAT ADJUSTMENT) | ||
| (INCLUDES BOLTS, NUTS, ROD, ARM & HOUSING) | ||||
| 212-7783 H | [1] | KIT-PULLEY | ||
| (INCLUDES PIN, PULLEY, RETAINING RING, SETSCREW & SPRING) | ||||
| 397-6405 | [1] | KIT-SEAT AIR COMPRESSOR | ||
| (INCLUDES STRAP, SCREWS, COMPRESSOR AS, BRACKET-MOUNT & HARNESS ASSEMBLIES) | ||||
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| H | KITS MARKED H SERVICE PART(S) MARKED H | |||
| M | METRIC PART | |||
#SEBP50271134
248-3164: TANK GP-WINDOW WASHER
248-3164 TANK GP-WINDOW WASHER
S/N B9W1-UP
3 PUMPS
PART OF 233-3138 WIPER & WASHER GP-WINDOW
ALSO AN ATTACHMENT
S/N B9W1-UP
3 PUMPS
PART OF 233-3138 WIPER & WASHER GP-WINDOW
ALSO AN ATTACHMENT
For full view, you need register
Parts for your 120M MOTOR GRADER:
CATERPILLAR SIS#SEBP50271135
325-9410: TANK GP-WINDOW WASHER
325-9410 TANK GP-WINDOW WASHER
S/N B9W1-UP
PART OF 310-2029 WIPER & WASHER GP-WINDOW
AN ATTACHMENT
S/N B9W1-UP
PART OF 310-2029 WIPER & WASHER GP-WINDOW
AN ATTACHMENT
For full view, you need register
#SEBP50271136
310-2054: TRIM GP-CAB
For full view, you need register
Parts for your 120M MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2R-2376 | [1] | WASHER (7X16X0.8-MM THK) | |
| 2. | 2V-2015 | [1] | NUT-SPEED | |
| 3. | 4E-8722 | [7] | NUT (RETAINER) | |
| 4. | 6V-8928 | [1] | HOOK-COAT | |
| 5. | 8Y-6379 | [1] | KIT-HAMMER (CAB WINDOW) | |
| (INCLUDES BRACKET & HAMMER) | ||||
| 6. | 8Y-6388 | [4] | LOUVER AS-VENT | |
| 7. | 9U-8263 | [1] | COVER | |
| 8. | 114-6658 | [18] | WASHER (6.5X17X1-MM THK) | |
| 9. | 144-4107 | [2] | FASTENER | |
| 10. | 164-8474 | [2] | LOUVER AS-VENT | |
| 11. | 171-4047 | [4] | LOUVER AS-VENT | |
| 12. | 392-5259 | [1] | ASHTRAY AS | |
| 13. | 249-4097 | [1] | PLATE AS | |
| 14. | 263-2576 | [1] | PLATE AS | |
| 15. | 274-2392 | [1] | SCREW-THUMB | |
| 16. | 294-1002 | [1] | PLENUM (LOWER, RH) | |
| 17. | 294-1004 | [1] | PLENUM (LOWER, LH) | |
| 18. | 297-4131 | [1] | SUPPORT AS | |
| 6V-9632 M | [3] | NUT-WELD (M6X1-THD) | ||
| 8T-3490 M | [4] | NUT-WELD (M10X1.5-THD) | ||
| 19. | 297-4133 | [1] | COVER AS | |
| 20. | 357-2270 | [1] | COVER AS | |
| 22. | 398-8490 | [1] | COVER AS-PANEL | |
| 297-4162 | [1] | FILM-IDENTIFICATION (SWITCH PANEL, UPPER) | ||
| 398-9593 | [1] | FILM-IDENTIFICATION (SWITCH PANEL, LOWER) | ||
| 23. | 297-4170 | [1] | INSULATION | |
| 24. | 303-9456 | [1] | CUP HOLDER | |
| 25. | 325-1258 | [1] | PLENUM (UPPER, RH) | |
| 26. | 325-1260 | [1] | PLENUM (UPPER, LH) | |
| 27. | 325-9407 | [1] | FILM-IDENTIFICATION (WRITE DATA) | |
| 28. | 361-0429 | [1] | PANEL (LH) | |
| 29. | 343-6499 | [1] | COVER AS (RH) | |
| 6V-9632 M | [1] | NUT-WELD (M6X1-THD) | ||
| 8T-3612 M | [2] | NUT-WELD (M8X1.25-THD) | ||
| 9X-2032 M | [1] | NUT-WELD (M4X0.7-THD) | ||
| 30. | 343-6500 | [1] | COVER AS (LH) | |
| 31. | 344-0989 | [1] | PLATE AS | |
| 9X-2032 M | [1] | NUT-WELD (M4X0.7-THD) | ||
| 32. | 361-0428 | [1] | PANEL (RH) | |
| 34. | 101-2867 | [8] | WASHER-HARD (7.2X25X2-MM THK) | |
| 35. | 104-2091 | [16] | SCREW-FLAT HEAD (6-20X0.5-IN) | |
| 36. | 111-4627 M | [6] | SCREW-MACHINE (M6X1X30-MM) | |
| 37. | 205-7048 M | [2] | INSERT-THREADED (M6X1-X14.73-MM) | |
| 38. | 331-7532 | [4] | NUT-INSERT | |
| 39. | 3E-8020 M | [6] | SCREW-TRUSS HEAD (M6X1X25-MM) | |
| 41. | 6K-3273 | [1] | RIVET-POP | |
| 42. | 6V-5839 | [4] | WASHER (11X21X2.5-MM THK) | |
| 43. | 6V-8212 M | [4] | BOLT (M10X1.5X16-MM) | |
| 44. | 7G-4824 | [1] | STRAP | |
| 45. | 8C-9660 | [6] | WASHER (4.6X7.9X0.8-MM THK) | |
| 46. | 8E-7791 | [1] | STRAP | |
| 47. | 8R-3695 | [1] | GROMMET | |
| 48. | 8T-4121 | [6] | WASHER-HARD (11X21X2.5-MM THK) | |
| 49. | 8T-4195 M | [6] | BOLT (M10X1.5X30-MM) | |
| 50. | 9N-1995 | [3] | RIVET-POP | |
| 51. | 9X-2043 M | [7] | SCREW-TRUSS HEAD (M6X1X14-MM) | |
| 52. | 9X-2044 M | [10] | SCREW-TRUSS HEAD (M6X1X16-MM) | |
| 53. | 9X-2045 M | [9] | SCREW-TRUSS HEAD (M6X1X20-MM) | |
| 54. | 5P-5927 D | SEAL (0.9-M) | ||
| 55. | 8T-6936 D | SEAL (0.5-M EACH) | ||
| 56. | 9D-3737 | [1] | PLUG-BUTTON | |
| 57. | 373-4446 | [1] | PLUG | |
| 58. | 9X-2038 | [9] | WASHER (7X19X2-MM THK) | |
| D | ORDER BY THE METER | |||
| M | METRIC PART | |||
#SEBP50271137
381-2494: TRIM GP-CAB
381-2494 TRIM GP-CAB -HVAC
S/N B9W1-UP
PART OF 379-3677, 389-5970, 420-1977 CAB AR
Type 1
AN ATTACHMENT
S/N B9W1-UP
PART OF 379-3677, 389-5970, 420-1977 CAB AR
Type 1
AN ATTACHMENT
For full view, you need register
Parts for your 120M MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2R-2376 | [1] | WASHER (7X16X0.8-MM THK) | |
| 2. | 2V-2015 | [1] | NUT-SPEED | |
| 3. | 172-8591 M | [7] | NUT-CLIP (M6X1-THD) | |
| 4. | 6V-8928 | [1] | HOOK-COAT | |
| 5. | 8Y-6379 | [1] | KIT-HAMMER (CAB WINDOW) | |
| (INCLUDES BRACKET & HAMMER) | ||||
| 6. | 8Y-6388 | [4] | LOUVER AS-VENT | |
| 7. | 9U-8263 B | [1] | COVER | |
| 8. | 114-6658 | [21] | WASHER (6.5X17X1-MM THK) | |
| 9. | 144-4107 B | [2] | FASTENER | |
| 10. | 164-8474 | [2] | LOUVER AS-VENT | |
| 11. | 171-4047 | [4] | LOUVER AS-VENT | |
| 13. | 330-3865 | [1] | PLATE AS | |
| 6V-9632 M | [1] | NUT-WELD (M6X1-THD) | ||
| 14. | 263-2576 | [1] | PLATE AS | |
| 6V-9632 M | [2] | NUT-WELD (M6X1-THD) | ||
| 9R-2672 M | [1] | BOSS-THREADED (M10X1.5X120-MM) | ||
| 5G-7065 | [1] | BOSS (M10X1.5-THD) | ||
| 15. | 274-2392 | [1] | SCREW-THUMB | |
| 16. | 294-1002 | [1] | PLENUM (LOWER, RH) | |
| 17. | 294-1004 | [1] | PLENUM (LOWER, LH) | |
| 18. | 419-7776 | [1] | COVER AS | |
| 19. | 357-2270 | [1] | COVER AS | |
| 20. | 398-8490 | [1] | COVER AS-PANEL | |
| 297-4162 | [1] | FILM-IDENTIFICATION (SWITCH PANEL, UPPER) | ||
| 398-9593 | [1] | FILM-IDENTIFICATION (SWITCH PANEL, LOWER) | ||
| 21. | 297-4170 | [1] | INSULATION | |
| 22. | 303-9456 | [1] | CUP HOLDER | |
| 23. | 325-1258 | [1] | PLENUM (UPPER, RH) | |
| 24. | 325-1260 | [1] | PLENUM (UPPER, LH) | |
| 25. | 325-9407 | [1] | FILM-IDENTIFICATION (WRITE DATA) | |
| 26. | 343-6499 | [1] | COVER AS (RH) | |
| 6V-9632 M | [1] | NUT-WELD (M6X1-THD) | ||
| 8T-3612 M | [6] | NUT-WELD (M8X1.25-THD) | ||
| 9X-2032 M | [1] | NUT-WELD (M4X0.7-THD) | ||
| 27. | 343-6500 | [1] | COVER AS (LH) | |
| 6V-9632 M | [4] | NUT-WELD (M6X1-THD) | ||
| 8T-3612 M | [4] | NUT-WELD (M8X1.25-THD) | ||
| 28. | 361-3114 | [1] | PLATE AS | |
| 9X-2032 M | [2] | NUT-WELD (M4X0.7-THD) | ||
| 29. | 357-2261 | [1] | SUPPORT AS | |
| 6V-9632 M | [3] | NUT-WELD (M6X1-THD) | ||
| 8T-3490 M | [4] | NUT-WELD (M10X1.5-THD) | ||
| 30. | 361-0428 | [1] | PANEL (RH) | |
| 31. | 361-0429 | [1] | PANEL (LH) | |
| 34. | 104-2091 | [16] | SCREW-FLAT HEAD (6-20X0.5-IN) | |
| 35. | 111-4627 M | [6] | SCREW-MACHINE (M6X1X30-MM) | |
| 37. | 195-0936 M | [6] | INSERT-THREADED (M6X1-THD) | |
| 38. | 3E-8020 M | [8] | SCREW-TRUSS HEAD (M6X1X25-MM) | |
| 39. | 9X-2038 | [9] | WASHER (7X19X2-MM THK) | |
| 40. | 6K-3273 | [1] | RIVET-POP | |
| 41. | 6V-5839 | [4] | WASHER (11X21X2.5-MM THK) | |
| 42. | 6V-8212 M | [4] | BOLT (M10X1.5X16-MM) | |
| 43. | 7G-4824 | [1] | STRAP | |
| 44. | 8C-9660 | [6] | WASHER (4.6X7.9X0.8-MM THK) | |
| 45. | 8E-7791 | [1] | STRAP | |
| 46. | 8R-3695 | [1] | GROMMET | |
| 47. | 8T-4121 | [6] | WASHER-HARD (11X21X2.5-MM THK) | |
| 48. | 8T-4195 M | [6] | BOLT (M10X1.5X30-MM) | |
| 49. | 9N-1995 | [3] | RIVET-POP | |
| 50. | 9X-2043 M | [7] | SCREW-TRUSS HEAD (M6X1X14-MM) | |
| 51. | 9X-2044 M | [14] | SCREW-TRUSS HEAD (M6X1X16-MM) | |
| 52. | 9X-2045 M | [6] | SCREW-TRUSS HEAD (M6X1X20-MM) | |
| 53. | 5P-5927 D | SEAL (0.9-M) | ||
| 54. | 8T-6936 D | SEAL (4.5-M EACH) | ||
| 55. | 373-4446 | [1] | PLUG | |
| 56. | 2V-3726 | [1] | BUMPER | |
| 57. | 1R-0622 B | [6] | PLUG-BUTTON | |
| 58. | 193-5916 | [4] | PLUG | |
| 59. | 162-2165 M | [1] | BOLT-SOCKET HEAD (M4X0.7X16-MM) | |
| 60. | 096-6166 | [1] | WASHER-HARD (4.5X9X1-MM THK) | |
| 61. | 8D-6542 | [1] | GROMMET | |
| 62. | 7X-0579 | [8] | WASHER-HARD (8.8X25.5X2-MM THK) | |
| B | USE AS REQUIRED | |||
| D | ORDER BY THE METER | |||
| M | METRIC PART | |||
#SEBP50271138
381-2494: TRIM GP-CAB
381-2494 TRIM GP-CAB -HVAC
S/N B9W1-UP
PART OF 379-3677, 389-5970, 420-1977 CAB AR
Type 2
AN ATTACHMENT
S/N B9W1-UP
PART OF 379-3677, 389-5970, 420-1977 CAB AR
Type 2
AN ATTACHMENT
For full view, you need register
Parts for your 120M MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1R-0622 B | [6] | PLUG-BUTTON | |
| 2. | 6V-8928 | [1] | HOOK-COAT | |
| 3. | 8Y-6379 | [1] | KIT-HAMMER (CAB WINDOW) | |
| (INCLUDES BRACKET & HAMMER) | ||||
| 4. | 8Y-6388 | [4] | LOUVER AS-VENT | |
| 5. | 9U-8263 B | [1] | COVER | |
| 6. | 144-4107 B | [2] | FASTENER | |
| 7. | 164-8474 | [2] | LOUVER AS-VENT | |
| 8. | 171-4047 | [4] | LOUVER AS-VENT | |
| 9. | 214-9186 C | [5] | BUTTON | |
| 10. | 228-6089 C | [1] | PLUG (ROCKER SWITCH) | |
| 11. | 274-2392 | [1] | SCREW-THUMB | |
| 12. | 294-1002 | [1] | PLENUM (LOWER, RH) | |
| 13. | 294-1004 | [1] | PLENUM (LOWER, LH) | |
| 14. | 297-4170 | [1] | INSULATION | |
| 15. | 303-9456 | [1] | CUP HOLDER | |
| 16. | 325-1258 | [1] | PLENUM (UPPER, RH) | |
| 17. | 325-1260 | [1] | PLENUM (UPPER, LH) | |
| 18. | 325-9407 | [1] | FILM-IDENTIFICATION (WRITE DATA) | |
| 19. | 330-3865 | [1] | PLATE AS | |
| 6V-9632 M | [2] | NUT-WELD (M6X1-THD) | ||
| 9X-2032 M | [1] | NUT-WELD (M4X0.7-THD) | ||
| 419-3214 | [6] | BOSS | ||
| 20. | 334-6090 C | [6] | STUD | |
| 21. | 343-6499 | [1] | COVER AS (RH) | |
| 6V-9632 M | [1] | NUT-WELD (M6X1-THD) | ||
| 8T-3612 M | [6] | NUT-WELD (M8X1.25-THD) | ||
| 9X-2032 M | [1] | NUT-WELD (M4X0.7-THD) | ||
| 22. | 343-6500 | [1] | COVER AS (LH) | |
| 6V-9632 M | [4] | NUT-WELD (M6X1-THD) | ||
| 8T-3612 M | [4] | NUT-WELD (M8X1.25-THD) | ||
| 23. | 357-2261 | [1] | SUPPORT AS | |
| 6V-9632 M | [3] | NUT-WELD (M6X1-THD) | ||
| 8T-3490 M | [4] | NUT-WELD (M10X1.5-THD) | ||
| 24. | 357-2270 | [1] | COVER AS | |
| 25. | 361-0429 | [1] | PANEL (LH) | |
| 26. | 368-8072 C | [1] | PANEL (RH) | |
| 27. | 373-4446 | [1] | PLUG | |
| 28. | 398-8490 | [1] | COVER AS-PANEL | |
| [1] | PANEL-COVER | |||
| 297-4162 | [1] | FILM-IDENTIFICATION (SWITCH PANEL, UPPER) | ||
| 398-9593 | [1] | FILM-IDENTIFICATION (SWITCH PANEL, LOWER) | ||
| 29. | 417-6775 C | [1] | TRAY | |
| 30. | 419-7776 | [1] | COVER AS | |
| 6V-9632 M | [2] | NUT-WELD (M6X1-THD) | ||
| 8T-3490 M | [2] | NUT-WELD (M10X1.5-THD) | ||
| 31. | 419-8564 C | [2] | STRAP | |
| 32. | 436-7082 C | [1] | TRAY | |
| 33. | 437-8991 C | [1] | NET AS (STORAGE) | |
| 34. | 438-8077 C | [1] | BIN-STORAGE | |
| 35. | 438-8078 C | [1] | BIN-STORAGE | |
| 36. | 439-9973 C | [6] | CLIP | |
| 37. | 441-7480 C | [1] | PLATE AS | |
| 9R-2672 M | [1] | BOSS-THREADED (M10X1.5X120-MM) | ||
| 9R-2821 M | [1] | BOSS (M10X1.5X15-MM) | ||
| 38. | 443-6429 C | [1] | FLOOR MAT AS | |
| 39. | C | [2] | TUBE AS | |
| 40. | 448-3613 C | [1] | STRAP | |
| 41. | 463-6185 C | [1] | LINER | |
| 42. | 463-6186 C | [1] | LINER | |
| 43. | 096-6166 | [1] | WASHER-HARD (4.5X9X1-MM THK) | |
| 44. | 104-2091 | [16] | SCREW-FLAT HEAD (6-20X0.5-IN) | |
| 45. | 111-4627 M | [6] | SCREW-MACHINE (M6X1X30-MM) | |
| 46. | 232-1473 C | [15] | WASHER (6X18X1-MM THK) | |
| 47. | 162-2165 M | [1] | BOLT-SOCKET HEAD (M4X0.7X16-MM) | |
| 48. | 195-0936 M | [6] | INSERT-THREADED (M6X1-THD) | |
| 49. | 212-6891 C | [6] | RETAINER | |
| 50. | 4I-3069 | [1] | WASHER-HARD (7X15.5X0.8-MM THK) | |
| 51. | 2V-2015 | [1] | NUT-SPEED | |
| 52. | 2V-3726 | [1] | BUMPER | |
| 53. | 3E-8020 M | [8] | SCREW-TRUSS HEAD (M6X1X25-MM) | |
| 54. | 172-8591 M | [7] | NUT-CLIP (M6X1-THD) | |
| 55. | 6K-3273 | [4] | RIVET-POP | |
| 57. | 8T-4191 M | [4] | BOLT (M10X1.5X16-MM) | |
| 58. | 7X-0579 | [8] | WASHER-HARD (8.8X25.5X2-MM THK) | |
| 59. | 8C-9660 | [6] | WASHER (4.6X7.9X0.8-MM THK) | |
| 60. | 8R-3695 | [1] | GROMMET | |
| 61. | 8T-4121 | [10] | WASHER-HARD (11X21X2.5-MM THK) | |
| 62. | 8T-4195 M | [6] | BOLT (M10X1.5X30-MM) | |
| 64. | 9X-2038 C | [11] | WASHER (7X19X2-MM THK) | |
| 65. | 9X-2043 CM | [9] | SCREW-TRUSS HEAD (M6X1X14-MM) | |
| 66. | 9X-2044 CM | [6] | SCREW-TRUSS HEAD (M6X1X16-MM) | |
| 67. | 9X-2045 M | [6] | SCREW-TRUSS HEAD (M6X1X20-MM) | |
| 68. | 5P-5927 D | SEAL (0.9-M) | ||
| 69. | 8T-6936 D | SEAL (4.5-M EACH) | ||
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| D | ORDER BY THE METER | |||
| M | METRIC PART | |||
#SEBP50271139
294-1011: WINDOW GP-CAB
294-1011 WINDOW GP-CAB -FRONT
S/N B9W1-205
PART OF 254-5399, 365-2969 CAB AR
ALSO AN ATTACHMENT
S/N B9W1-205
PART OF 254-5399, 365-2969 CAB AR
ALSO AN ATTACHMENT
For full view, you need register
Parts for your 120M MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 114-6658 | [6] | WASHER (6.5X17X1-MM THK) | |
| 2. | 294-1017 | [1] | GLASS | |
| 3. | 294-1018 | [2] | BRACKET | |
| 4. | 9X-2045 M | [6] | SCREW-TRUSS HEAD (M6X1X20-MM) | |
| 5. | 294-1015 E | SEAL (25-CM EACH) | ||
| 6. | 294-1014 E | SEAL-GLASS (171-CM) | ||
| 7. | 224-3969 | [1] | INDICATOR-LEVEL (MACHINE) | |
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
