396-9714 WIRING GP-REAR S/N B9G1-UP PART OF 367-7796, 426-1257 CONVERSION AR-CERTIFICATION, 356-9759 CONVERSION AR-MACHINE, 352-2104 OPTION AR-HYDRAULIC, 364-3738, 367-7799 OPTION AR-REGIONAL AN ATTACHMENT 140M

ELECTRICAL AND STARTING SYSTEM

WIRING GP

0. 396-9714 WIRING GP-
1. 431-4287 WIRING GP-

LIGHTING GP

2. 233-4623 WIRING GP-
3. 233-4623 WIRING GP-
4. 233-4623 WIRING GP-
5. 247-6430 WIRING GP-
6. 247-6430 WIRING GP-

WIRING GP

7. 269-4150 WIRING GP-

SENSOR GP

8. 235-6194 WIRING GP-
9. 235-6194 WIRING GP-
0. INFORMATION

MOTOR GRADER 140M MOTOR GRADER B9G
140M Motor Grader - All Wheel Drive B9G00001-UP (MACHINE) POWERED BY C9 Engine SEBP5029 140M B9G (2008)

ELECTRICAL AND STARTING SYSTEM

WIRING GP

352-1596 WIRING GP-REAR

352-1597 WIRING GP-REAR

396-9714 WIRING GP-REAR

431-4287 WIRING GP-REAR

233-4623 WIRING GP-REAR LIGHTING

#SEBP50290650

396-9714: WIRING GP-REAR

WIRING GP-REAR

396-9714 WIRING GP-REAR
S/N B9G1-UP
PART OF 367-7796, 426-1257 CONVERSION AR-CERTIFICATION, 356-9759 CONVERSION AR-MACHINE, 352-2104 OPTION AR-HYDRAULIC, 364-3738, 367-7799 OPTION AR-REGIONAL
AN ATTACHMENT

i05253937 SEBP5029

For full view, you need register

Parts for your 140M MOTOR GRADER:

Pos.	Part No	Qty	Parts name
1.	3S-2093	[8]	STRAP-CABLE
2.	7K-1181	[8]	STRAP-CABLE
3.	8S-2634	[1]	COVER AS
4.	8W-8528	[1]	SLEEVE
5.	236-2341	[1]	CABLE AS
	1S-7251	[1]	TERMINAL-CABLE (00-GA, 1/2-IN SCREW)
	8N-1725	[1]	COVER AS-TERMINAL (RED)
	8L-8413	[1]	STRAP-CABLE (WHITE)
	3S-6049	[1]	TERMINAL AS-BATTERY (POSITIVE)
	1M-6119	[1]	BOLT (5/16-18X1.375-IN)
	1M-6120	[1]	NUT (5/16-18-THD)
	159-8049 E		CABLE (00-GA, RED)(85-CM)
6.	286-2439	[1]	CABLE AS
	1S-7252	[1]	TERMINAL-CABLE (00-GA, 3/8-IN SCREW)
	159-8049 E		CABLE (00-GA, RED)(62-CM)
	276-1786	[1]	COVER-TERMINAL (RED)
	315-0180	[1]	TERMINAL-RING (00-GA, 3/8-IN SCREW)
	328-8425	[1]	COVER-TERMINAL (RED)
7.	291-1889	[1]	CABLE AS
	1S-7251	[1]	TERMINAL-CABLE (00-GA, 1/2-IN SCREW)
	9X-9825	[1]	TERMINAL-CABLE (00-GA, 1/2-IN SCREW)
	159-8049 E		CABLE (00-GA, RED)(142-CM)
	328-8425	[1]	COVER-TERMINAL (RED)
8.	291-1891	[1]	CABLE AS
	1S-7251	[1]	TERMINAL-CABLE (00-GA, 1/2-IN SCREW)
	159-8049 E		CABLE (00-GA, RED)(76-CM)
	194-4046	[1]	COVER AS-TERMINAL (00-GA, POSITIVE, RED)
	8L-8413	[1]	STRAP-CABLE (WHITE)
9.	291-3817	[1]	CABLE AS
	1S-7252	[1]	TERMINAL-CABLE (00-GA, 3/8-IN SCREW)
	159-8049 E		CABLE (00-GA, RED)(103-CM)
	190-3848	[1]	TERMINAL-RING (00-GA, 1/2-IN SCREW)
	190-3849	[1]	COVER-TERMINAL (RED)
	328-8425	[1]	COVER-TERMINAL (RED)
10.	388-7675	[1]	RECEPTACLE AS
	1S-7251	[1]	TERMINAL-CABLE (00-GA, 1/2-IN SCREW)
	159-8049 E		CABLE (00-GA, RED)(50-CM)
	159-8050 E		CABLE (00-GA, BLACK)(16-CM)
	190-3848	[1]	TERMINAL-RING (00-GA, 1/2-IN SCREW)
		[1]	COVER-TERMINAL
11.	396-9715	[1]	HARNESS AS-MOTOR (START)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8T-8729	[2]	PIN-CONNECTOR (16-GA TO 20-GA)
	8T-8730	[2]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	8T-8737	[2]	PLUG-SEAL
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
			(INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
	230-4011	[1]	PLUG AS-CONNECTOR (2-PIN)
	455-0704	[1]	SEAL-CONNECTOR
12.	105-3482 M	[4]	BOLT-SOCKET HEAD (M8X1.25X16-MM)
13.	144-8344	[1]	SPACER (11X19X20-MM THK)
14.	174-5907	[2]	CLIP (LOOP)
15.	1S-1476	[2]	CLIP
16.	4S-1962	[11]	CLIP (LOOP)
17.	5P-4116	[4]	WASHER-HARD (8.8X20.5X2-MM THK)
18.	7V-6571	[13]	GROMMET
19.	8T-4121	[6]	WASHER-HARD (11X21X2.5-MM THK)
20.	8T-4136 M	[2]	BOLT (M10X1.5X25-MM)
21.	8T-4137 M	[3]	BOLT (M10X1.5X20-MM)
22.	8T-4179 M	[3]	BOLT (M12X1.75X20-MM)
23.	8T-4186 M	[1]	BOLT (M10X1.5X40-MM)
24.	8T-4194 M	[2]	BOLT (M12X1.75X50-MM)
25.	8T-4223	[5]	WASHER-HARD (13.5X25.5X3-MM THK)
26.	198-4778	[2]	WASHER-HARD (13.5X30X12-MM THK)
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

#SEBP50290651

431-4287: WIRING GP-REAR

WIRING GP-REAR

431-4287 WIRING GP-REAR
S/N B9G1-UP
PART OF 364-3743 CONVERSION AR-CERTIFICATION
AN ATTACHMENT

i05263379 SEBP5029

For full view, you need register

Parts for your 140M MOTOR GRADER:

Pos.	Part No	Qty	Parts name
1.	3S-2093	[10]	STRAP-CABLE
2.	7K-1181	[21]	STRAP-CABLE
3.	8S-2634	[1]	COVER AS
4.	8W-8528	[1]	SLEEVE
5.	240-7192	[4]	RESISTOR AS (1500-OHM, 1-WATT)
			(EACH INCLUDES)
	8T-8729	[2]	PIN-CONNECTOR (16-GA TO 20-GA)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
6.	253-9557	[1]	BLOCK AS-JUNCTION
7.	313-7162	[1]	CABLE AS
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	2L-8077	[1]	TERMINAL-RING (14-GA TO 16-GA, 1/4-IN SCREW)
	2L-8079	[1]	TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW)
	3S-6049	[1]	TERMINAL AS-BATTERY (POSITIVE)
	1M-6119	[1]	BOLT (5/16-18X1.375-IN)
	1M-6120	[1]	NUT (5/16-18-THD)
	7T-9987	[1]	COVER AS-TERMINAL (RED)
	8L-8413	[1]	STRAP-CABLE (WHITE)
	109-0887 E		SLEEVE (60-CM)
	8T-8730	[2]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	3S-2093	[1]	STRAP-CABLE
	368-2369 B		TAPE
	1S-7251	[1]	TERMINAL-CABLE (00-GA, 1/2-IN SCREW)
	135-5009 E		TUBE-HEAT SHRINK (32-MM DIA)(19-CM)
	5P-5623 BD		WIRE-ELECTRICAL (16-GA, BLACK)
8.	313-7164	[1]	CABLE AS
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	2L-8077	[1]	TERMINAL-RING (14-GA TO 16-GA, 1/4-IN SCREW)
	9X-4519	[1]	BOOT (RED)
	8T-8729	[1]	PIN-CONNECTOR (16-GA TO 20-GA)
	8T-8737	[1]	PLUG-SEAL
	109-0887 E		SLEEVE (69-CM)
	368-2369 B		TAPE
	9X-9825	[1]	TERMINAL-CABLE (00-GA, 1/2-IN SCREW)
	1S-7251	[1]	TERMINAL-CABLE (00-GA, 1/2-IN SCREW)
	135-5009 E		TUBE-HEAT SHRINK (32-MM DIA)(21-CM)
9.	313-7165	[1]	CABLE AS
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	2L-8077	[1]	TERMINAL-RING (14-GA TO 16-GA, 1/4-IN SCREW)
	2L-8081	[1]	TERMINAL-RING (14-GA TO 16-GA, 1/2-IN SCREW)
	194-4047	[1]	TERMINAL-RING (00-GA, 1/2-IN SCREW)
	194-4046	[1]	COVER AS-TERMINAL (00-GA, POSITIVE, RED)
	8L-8413	[1]	STRAP-CABLE (WHITE)
	109-0887 E		SLEEVE (72-CM)
	8T-8730	[2]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	3S-2093	[1]	STRAP-CABLE
	368-2369 B		TAPE
	1S-7251	[1]	TERMINAL-CABLE (00-GA, 1/2-IN SCREW)
	135-5009 E		TUBE-HEAT SHRINK (32-MM DIA)(20-CM)
	5P-5623 BD		WIRE-ELECTRICAL (16-GA, BLACK)
10.	313-7167	[1]	CABLE AS
	155-2270	[2]	KIT-CONNECTING PLUG (2-PIN)
			(EACH KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	1S-7252	[1]	TERMINAL-CABLE (00-GA, 3/8-IN SCREW)
	3S-2093	[1]	STRAP-CABLE
	8T-8730	[2]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	8T-8737	[2]	PLUG-SEAL
	9X-4519	[1]	BOOT (RED)
	109-0887 E		SLEEVE (26-CM)
	135-5009 E		TUBE-HEAT SHRINK (32-MM DIA)(19-CM)
	190-3848	[1]	TERMINAL-RING (00-GA, 1/2-IN SCREW)
	190-3849	[1]	COVER-TERMINAL (RED)
	368-2369 B		TAPE
11.	313-7229	[1]	CABLE AS
	9X-4519	[1]	BOOT (RED)
	348-7341	[1]	COVER-TERMINAL
	8T-8729	[1]	PIN-CONNECTOR (16-GA TO 20-GA)
	8T-8737	[1]	PLUG-SEAL
	109-0887 E		SLEEVE (47-CM)
	8T-8730	[2]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	368-2369 B		TAPE
	1S-7252	[1]	TERMINAL-CABLE (00-GA, 3/8-IN SCREW)
	315-0180	[1]	TERMINAL-RING (00-GA, 3/8-IN SCREW)
	135-5009 E		TUBE-HEAT SHRINK (32-MM DIA)(21-CM)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	5P-5623 BD		WIRE-ELECTRICAL (16-GA, BLACK)
	2L-8079	[1]	TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
			(INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
12.	355-5071	[1]	WIRE AS
13.	389-9478	[1]	RECEPTACLE AS
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	2L-8077	[1]	TERMINAL-RING (14-GA TO 16-GA, 1/4-IN SCREW)
	2L-8079	[1]	TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW)
	159-8050 E		CABLE (00-GA, BLACK)(16-CM)
		[1]	COVER-TERMINAL
	109-0887 E		SLEEVE (74-CM)
	8T-8730	[2]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	3S-2093	[1]	STRAP-CABLE
	368-2369 B		TAPE
	1S-7251	[1]	TERMINAL-CABLE (00-GA, 1/2-IN SCREW)
	190-3848	[1]	TERMINAL-RING (00-GA, 1/2-IN SCREW)
	135-5009 E		TUBE-HEAT SHRINK (32-MM DIA)(19-CM)
	5P-5623 BD		WIRE-ELECTRICAL (16-GA, BLACK)
14.	396-9715	[1]	HARNESS AS-MOTOR
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8T-8729	[2]	PIN-CONNECTOR (16-GA TO 20-GA)
	230-4011	[1]	PLUG AS-CONNECTOR (2-PIN)
	455-0704	[1]	SEAL-CONNECTOR
	8T-8737	[2]	PLUG-SEAL
	8T-8730	[2]	SOCKET-CONNECTOR (16-GA TO 18-GA)
15.	105-3482 M	[4]	BOLT-SOCKET HEAD (M8X1.25X16-MM)
16.	130-5300	[2]	CLIP
17.	132-5789	[1]	CLIP (LADDER)
18.	144-8344	[1]	SPACER (11X19X20-MM THK)
19.	150-4086 M	[2]	SCREW (M4X0.7X16-MM)
20.	1S-6420	[2]	CLIP
21.	4P-7581	[1]	CLIP (LADDER)
22.	5C-2890 M	[2]	NUT (M6X1-THD)
23.	5P-4116	[4]	WASHER-HARD (8.8X20.5X2-MM THK)
24.	6D-4246	[1]	CLIP (LOOP)
25.	8T-4121	[8]	WASHER-HARD (11X21X2.5-MM THK)
26.	8T-4136 M	[2]	BOLT (M10X1.5X25-MM)
27.	8T-4137 M	[5]	BOLT (M10X1.5X20-MM)
28.	8T-4179 M	[3]	BOLT (M12X1.75X20-MM)
29.	8T-4186 M	[1]	BOLT (M10X1.5X40-MM)
30.	8T-4194 M	[2]	BOLT (M12X1.75X50-MM)
31.	8T-4223	[5]	WASHER-HARD (13.5X25.5X3-MM THK)
32.	198-4778	[2]	WASHER-HARD (13.5X30X12-MM THK)
33.	9M-8406	[11]	CLIP (LOOP)
34.	9X-8256	[2]	WASHER (6.6X12X2-MM THK)
	B		USE AS REQUIRED
	D		ORDER BY THE METER
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

#SEBP50290652

233-4623: WIRING GP-REAR LIGHTING

WIRING GP-REAR LIGHTING

233-4623 WIRING GP-REAR LIGHTING -STOP, TAIL, TURN, BACKUP
S/N B9G1-179
FOLD DOWN ARMS
PART OF 298-7463, 298-7465 LIGHTING GP-ROADING
FOR USE WITH @@@@@233-4610@@@@@, @@@@@233-4624@@@@@
CANNOT BE USED WITH @@@@@247-6430@@@@@
AN ATTACHMENT

i02183522 SEBP5029

2334623 WIRING GP-REAR LIGHTING Parts scheme

For full view, you need register

Parts for your 140M MOTOR GRADER:

Pos.	Part No	Qty	Parts name
1.	3S-2093	[22]	STRAP-CABLE
2.	7X-2393	[4]	BUMPER-CONICAL
3.	9S-1316	[2]	SPRING
4.	116-0118	[2]	CLIP
5.	135-0426 Y	[2]	LAMP GP-SIGNAL (24-VOLT, STOP, TAIL)
6.	199-3368 Y	[2]	LAMP GP-SIGNAL (24-VOLT, TURN)
7.	245-2810	[1]	BRACKET AS (RH)
8.	245-2811	[1]	BRACKET AS (LH)
9.	245-2812	[1]	ARM AS (RH)
	5D-9629	[2]	ROD
10.	245-2813	[1]	ARM AS (LH)
	5D-9629	[3]	ROD
11.	245-2814	[2]	ROD
12.	261-1502 Y	[2]	LAMP GP (24-VOLT)
13.	286-9718	[1]	HARNESS AS-REAR LIGHTING
	102-8802	[5]	KIT-RECEPTACLE (2-PIN)
	102-8803	[4]	KIT-RECEPTACLE (3-PIN)
			(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
	155-2260	[4]	KIT-CONNECTING PLUG (3-PIN)
	155-2270	[7]	KIT-CONNECTING PLUG (2-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
14.	292-9390	[2]	FILM-WARNING (HAND CRUSH HAZARD, STAY BACK)
15.	292-9391	[2]	FILM-WARNING (HAND CRUSH HAZARD, STAY BACK)
16.	117-9409	[2]	GROMMET
17.	156-6175	[2]	CLIP (LADDER)
18.	1V-6688	[1]	GROMMET
19.	3B-5301	[2]	PIN-COTTER
20.	5C-2890 M	[18]	NUT (M6X1-THD)
21.	5P-1076	[4]	WASHER-HARD (13.5X30X4-MM THK)
22.	5P-4115	[6]	WASHER-HARD (7.2X19X2-MM THK)
23.	6V-7687 M	[2]	LOCKNUT (M12X1.75-THD)
24.	7X-7729	[4]	WASHER (11X25X3-MM THK)
25.	8D-5641 B	[8]	BEARING
26.	8T-4136 M	[4]	BOLT (M10X1.5X25-MM)
27.	8T-4176 M	[2]	BOLT (M12X1.75X90-MM)
28.	8T-4223	[2]	WASHER-HARD (13.5X25.5X3-MM THK)
29.	9X-8256	[12]	WASHER (6.6X12X2-MM THK)
	B		USE AS REQUIRED
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP50290653

233-4623: WIRING GP-REAR LIGHTING

WIRING GP-REAR LIGHTING

233-4623 WIRING GP-REAR LIGHTING -STOP, TAIL, TURN, BACKUP
S/N B9G180-249
FOLD DOWN ARMS
PART OF 298-7463, 298-7465 LIGHTING GP-ROADING
FOR USE WITH @@@@@233-4610@@@@@, @@@@@233-4624@@@@@
CANNOT BE USED WITH @@@@@247-6430@@@@@
AN ATTACHMENT

i03364121 SEBP5029

For full view, you need register

Parts for your 140M MOTOR GRADER:

Pos.	Part No	Qty	Parts name
1.	3S-2093	[22]	STRAP-CABLE
2.	7X-2393	[4]	BUMPER-CONICAL
3.	9S-1316	[2]	SPRING
4.	116-0118	[2]	CLIP
5.	135-0426 Y	[2]	LAMP GP-SIGNAL (24-VOLT, STOP, TAIL)
6.	201-5464 CY	[2]	LAMP GP-SIGNAL (12-VOLT, 24-VOLT, TURN)
7.	245-2810	[1]	BRACKET AS (RH)
8.	245-2811	[1]	BRACKET AS (LH)
9.	245-2812	[1]	ARM AS (RH)
	5D-9629	[2]	ROD
10.	245-2813	[1]	ARM AS (LH)
	5D-9629	[3]	ROD
11.	245-2814	[2]	ROD
12.	261-1502 Y	[2]	LAMP GP (24-VOLT)
13.	286-9718	[1]	HARNESS AS-REAR LIGHTING
	102-8802	[5]	KIT-RECEPTACLE (2-PIN)
	102-8803	[4]	KIT-RECEPTACLE (3-PIN)
			(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
	155-2260	[4]	KIT-CONNECTING PLUG (3-PIN)
	155-2270	[7]	KIT-CONNECTING PLUG (2-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
14.	292-9390	[2]	FILM-WARNING (HAND CRUSH HAZARD, STAY BACK)
15.	292-9391	[2]	FILM-WARNING (HAND CRUSH HAZARD, STAY BACK)
16.	117-9409	[2]	GROMMET
17.	156-6175	[2]	CLIP (LADDER)
18.	1V-6688	[1]	GROMMET
19.	3B-5301	[2]	PIN-COTTER
20.	5C-2890 M	[18]	NUT (M6X1-THD)
21.	5P-1076	[4]	WASHER-HARD (13.5X30X4-MM THK)
22.	5P-4115	[6]	WASHER-HARD (7.2X19X2-MM THK)
23.	6V-7687 M	[2]	LOCKNUT (M12X1.75-THD)
24.	7X-7729	[4]	WASHER (11X25X3-MM THK)
25.	8D-5641 B	[8]	BEARING
26.	8T-4136 M	[4]	BOLT (M10X1.5X25-MM)
27.	8T-4176 M	[2]	BOLT (M12X1.75X90-MM)
28.	8T-4223	[2]	WASHER-HARD (13.5X25.5X3-MM THK)
29.	9X-8256	[12]	WASHER (6.6X12X2-MM THK)
	B		USE AS REQUIRED
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP50290654

233-4623: WIRING GP-REAR LIGHTING

WIRING GP-REAR LIGHTING

233-4623 WIRING GP-REAR LIGHTING -STOP, TAIL, TURN, BACKUP
S/N B9G1-UP
FOLD DOWN ARMS
PART OF 560-8856 LIGHTING AR-ROADING, 298-7463, 298-7465 LIGHTING GP-ROADING
FOR USE WITH @@@@@233-4610@@@@@, @@@@@233-4624@@@@@
CANNOT BE USED WITH @@@@@247-6430@@@@@
AN ATTACHMENT

i03630362 SEBP5029

For full view, you need register

Parts for your 140M MOTOR GRADER:

Pos.	Part No	Qty	Parts name
1.	3S-2093	[22]	STRAP-CABLE
2.	7X-2393	[4]	BUMPER-CONICAL
3.	9S-1316	[2]	SPRING
4.	116-0118	[2]	CLIP
5.	334-8049 CY	[2]	LAMP GP-SIGNAL (24-VOLT, STOP, TAIL)
6.	201-5464 Y	[2]	LAMP GP-SIGNAL (12-VOLT, 24-VOLT, TURN)
7.	245-2810	[1]	BRACKET AS (RH)
8.	245-2811	[1]	BRACKET AS (LH)
9.	245-2812	[1]	ARM AS (RH)
	5D-9629	[2]	ROD
10.	245-2813	[1]	ARM AS (LH)
	5D-9629	[3]	ROD
11.	245-2814	[2]	ROD
12.	261-1502 Y	[2]	LAMP GP (24-VOLT)
13.	286-9718	[1]	HARNESS AS-REAR LIGHTING
	102-8802	[5]	KIT-RECEPTACLE (2-PIN)
	102-8803	[4]	KIT-RECEPTACLE (3-PIN)
			(EACH KIT INCLUDES RECEPTACLE AS & WEDGE)
	8T-8730	[11]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	8T-8737	[26]	PLUG-SEAL
	9W-0844	[23]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	119-3662 E		TUBE-HEAT SHRINK (10.85-MM DIA)(13-CM)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(25-CM)
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
	155-2260	[4]	KIT-CONNECTING PLUG (3-PIN)
	155-2270	[7]	KIT-CONNECTING PLUG (2-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
16.	117-9409	[2]	GROMMET
17.	156-6175	[2]	CLIP (LADDER)
18.	1V-6688	[1]	GROMMET
19.	3B-4623	[2]	PIN-COTTER
20.	5C-2890 M	[18]	NUT (M6X1-THD)
21.	5P-1076	[4]	WASHER-HARD (13.5X30X4-MM THK)
22.	5P-4115	[6]	WASHER-HARD (7.2X19X2-MM THK)
23.	129-3180 M	[2]	LOCKNUT (M12X1.75-THD)
24.	7X-7729	[4]	WASHER (11X25X3-MM THK)
25.	132-0338 B	[8]	WASHER-PLASTIC (13X31.7X0.8-MM THK)
26.	8T-4136 M	[4]	BOLT (M10X1.5X25-MM)
27.	8T-4176 M	[2]	BOLT (M12X1.75X90-MM)
28.	8T-4223	[2]	WASHER-HARD (13.5X25.5X3-MM THK)
29.	9X-8256	[12]	WASHER (6.6X12X2-MM THK)
	B		USE AS REQUIRED
	C		CHANGE FROM PREVIOUS TYPE
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP50290655

247-6430: WIRING GP-REAR LIGHTING

WIRING GP-REAR LIGHTING

247-6430 WIRING GP-REAR LIGHTING -TAIL
S/N B9G1-249
CANNOT BE USED WITH @@@@@298-7463@@@@@, @@@@@298-7465@@@@@, @@@@@233-4624@@@@@, @@@@@233-4610@@@@@, @@@@@233-4623@@@@@
AN ATTACHMENT

i02183696 SEBP5029

2476430 WIRING GP-REAR LIGHTING Parts scheme

For full view, you need register

Parts for your 140M MOTOR GRADER:

Pos.	Part No	Qty	Parts name
1.	3S-2093	[25]	STRAP-CABLE
2.	116-0118	[2]	CLIP
3.	135-0426 Y	[2]	LAMP GP-SIGNAL (24-VOLT, STOP, TAIL)
4.	236-1928	[1]	BRACKET AS
5.	239-6379	[1]	BRACKET AS
6.	261-1502 Y	[2]	LAMP GP (24-VOLT)
7.	286-9718	[1]	HARNESS AS-REAR LIGHTING
	102-8802	[5]	KIT-RECEPTACLE (2-PIN)
	102-8803	[4]	KIT-RECEPTACLE (3-PIN)
			(EACH INCLUDES RECEPTACLE AS & WEDGE)
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
	155-2260	[4]	KIT-CONNECTING PLUG (3-PIN)
	155-2270	[7]	KIT-CONNECTING PLUG (2-PIN)
			(EACH INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
8.	156-6175	[2]	CLIP (LADDER)
9.	1V-6688	[1]	GROMMET
10.	5C-2890 M	[12]	NUT (M6X1-THD)
11.	5P-4115	[6]	WASHER-HARD (7.2X19X2-MM THK)
13.	8T-4121	[6]	WASHER-HARD (11X21X2.5-MM THK)
14.	8T-4172 M	[6]	BOLT (M10X1.5X80-MM)
15.	9X-8256	[6]	WASHER (6.6X12X2-MM THK)
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP50290656

247-6430: WIRING GP-REAR LIGHTING

WIRING GP-REAR LIGHTING

247-6430 WIRING GP-REAR LIGHTING -TAIL
S/N B9G250-UP
CANNOT BE USED WITH @@@@@298-7463@@@@@, @@@@@298-7465@@@@@, @@@@@233-4624@@@@@, @@@@@233-4610@@@@@, @@@@@233-4623@@@@@
AN ATTACHMENT

i03631949 SEBP5029

For full view, you need register

Parts for your 140M MOTOR GRADER:

Pos.	Part No	Qty	Parts name
1.	3S-2093	[25]	STRAP-CABLE
2.	116-0118	[2]	CLIP
3.	334-8049 CY	[2]	LAMP GP-SIGNAL (24-VOLT, STOP, TAIL)
4.	236-1928	[1]	BRACKET AS
5.	239-6379	[1]	BRACKET AS
6.	261-1502 Y	[2]	LAMP GP (24-VOLT)
7.	286-9718	[1]	HARNESS AS-REAR LIGHTING
	102-8802	[5]	KIT-RECEPTACLE (2-PIN)
	102-8803	[4]	KIT-RECEPTACLE (3-PIN)
			(EACH KIT INCLUDES RECEPTACLE AS & WEDGE)
	8T-8730	[11]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	8T-8737	[26]	PLUG-SEAL
	9W-0844	[23]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	119-3662 E		TUBE-HEAT SHRINK (10.85-MM DIA)(13-CM)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(25-CM)
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
	155-2260	[4]	KIT-CONNECTING PLUG (3-PIN)
	155-2270	[7]	KIT-CONNECTING PLUG (2-PIN)
			(EACH KIT INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
8.	156-6175	[2]	CLIP (LADDER)
9.	1V-6688	[1]	GROMMET
10.	5C-2890 M	[12]	NUT (M6X1-THD)
11.	5P-4115	[6]	WASHER-HARD (7.2X19X2-MM THK)
13.	8T-4121	[6]	WASHER-HARD (11X21X2.5-MM THK)
14.	8T-4172 M	[6]	BOLT (M10X1.5X80-MM)
15.	9X-8256	[6]	WASHER (6.6X12X2-MM THK)
	C		CHANGE FROM PREVIOUS TYPE
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP50290657

269-4150: WIRING GP-SECONDARY STEERING

WIRING GP-SECONDARY STEERING

269-4150 WIRING GP-SECONDARY STEERING
S/N B9G1-1056
PART OF 321-2930, 349-2552 COMMON AR

i02300388 SEBP5029

2694150 WIRING GP-SECONDARY STEERING Parts scheme

For full view, you need register

Parts for your 140M MOTOR GRADER:

Pos.	Part No	Qty	Parts name
1.	179-0006 Y	[1]	SWITCH GP-MAGNETIC (24-VOLT TO 32-VOLT)(SECONDARY STEERING RELAY)
2.	134-3355	[1]	STRAP AS
3.	8T-4121	[1]	WASHER-HARD (11X21X2.5-MM THK)
4.	8T-4137 M	[1]	BOLT (M10X1.5X20-MM)
5.	8T-4171 M	[4]	BOLT (M6X1X12-MM)
6.	9X-8256	[4]	WASHER (6.6X12X2-MM THK)
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP50290658

235-6194: WIRING GP-SENSOR

WIRING GP-SENSOR

235-6194 WIRING GP-SENSOR -ALL WHEEL DRIVE
S/N B9G1-1013
PART OF 321-2930, 349-2552 COMMON AR, 364-1991 OPTION AR-MACHINE
ALSO AN ATTACHMENT

i02837205 SEBP5029

For full view, you need register

Parts for your 140M MOTOR GRADER:

Pos.	Part No	Qty	Parts name
1.	264-4297	[1]	SENSOR AS-TEMPERATURE (2-PIN)(HYDRAULIC OIL)
	137-6645	[1]	PAD-CONNECTOR
2.	288-3901	[1]	GUARD AS-SENSOR
3.	288-3902	[1]	GUARD AS
4.	289-8436	[1]	HARNESS AS-SENSOR (MOTOR SPEED, RH)
	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	155-2271	[1]	KIT-CONNECTING PLUG (4-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
5.	289-8439	[1]	HARNESS AS-SENSOR (MOTOR SPEED, LH)
	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	155-2271	[1]	KIT-CONNECTING PLUG (4-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
6.	291-4848	[1]	HARNESS AS-PUMP
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	155-2270	[4]	KIT-CONNECTING PLUG (2-PIN)
			(EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
7.	299-9001	[1]	HARNESS AS-FRONT
	9X-7144	[1]	PLUG AS-CONNECTOR (24-PIN)
	102-8803	[2]	KIT-RECEPTACLE (3-PIN)
			(EACH INCLUDES RECEPTACLE AS & WEDGE)
	155-2270	[6]	KIT-CONNECTING PLUG (2-PIN)
	155-2271	[2]	KIT-CONNECTING PLUG (4-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
8.	300-1276	[1]	HARNESS AS-REAR
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
9.	130-5300	[3]	CLIP
10.	132-5789 C	[1]	CLIP (LADDER)
11.	149-7738 C	[2]	CLIP (LOOP)
12.	3K-0360	[1]	SEAL-O-RING
13.	4D-7794	[2]	CLIP
14.	4K-8864	[1]	CLIP (LOOP)
15.	4P-7581	[2]	CLIP (LADDER)
16.	6D-3479	[1]	CLIP (LOOP)
17.	6V-3265	[2]	CLIP
18.	7K-1181 C	[18]	STRAP-CABLE
19.	8T-4121 C	[20]	WASHER-HARD (11X21X2.5-MM THK)
20.	8T-4133 M	[3]	NUT (M10X1.5-THD)
21.	8T-4136 M	[7]	BOLT (M10X1.5X25-MM)
22.	8T-4137 CM	[10]	BOLT (M10X1.5X20-MM)
23.	9M-8406	[3]	CLIP (LOOP)
24.	9X-8250 C	[3]	CLIP (LOOP)
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART

#SEBP50290659

235-6194: WIRING GP-SENSOR

WIRING GP-SENSOR

235-6194 WIRING GP-SENSOR -ALL WHEEL DRIVE
S/N B9G1014-1056
PART OF 349-2552 COMMON AR, 364-1991 OPTION AR-MACHINE
ALSO AN ATTACHMENT

i03901273 SEBP5029

For full view, you need register

Parts for your 140M MOTOR GRADER:

Pos.	Part No	Qty	Parts name
1.	7K-1181 C	[20]	STRAP-CABLE
2.	8T-8737 C	[6]	PLUG-SEAL
3.	264-4297	[1]	SENSOR AS-TEMPERATURE (2-PIN)(HYDRAULIC OIL)
	137-6645	[1]	PAD-CONNECTOR
4.	291-4848	[1]	HARNESS AS-PUMP
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8T-8729	[5]	PIN-CONNECTOR (16-GA TO 20-GA)
	8T-8730	[8]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	8T-8737	[1]	PLUG-SEAL
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM)
	155-2270	[4]	KIT-CONNECTING PLUG (2-PIN)
			(EACH KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
5.	299-9001	[1]	HARNESS AS-FRONT
	102-8803	[2]	KIT-RECEPTACLE (3-PIN)
			(EACH KIT INCLUDES RECEPTACLE AS & WEDGE)
	8T-8729	[4]	PIN-CONNECTOR (16-GA TO 20-GA)
	8T-8730	[25]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	8T-8737	[6]	PLUG-SEAL
	9X-3401	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	9X-3402	[13]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	9X-7144	[1]	PLUG AS-CONNECTOR (24-PIN)
	3E-4367	[1]	RING-RETAINING
	3E-8558 M	[1]	BOLT (M5X0.8X39.37-MM)
	9X-3265	[2]	SEAL-CONNECTOR (24-PIN)
	119-3662 E		TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(25-CM)
	155-2270	[6]	KIT-CONNECTING PLUG (2-PIN)
	155-2271	[2]	KIT-CONNECTING PLUG (4-PIN)
			(EACH KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	163-4519 E		TAPE (8-CM)
6.	300-1276	[1]	HARNESS AS-REAR
	8T-8730	[16]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	8T-8737	[4]	PLUG-SEAL
	114-8843 E		SLEEVE-PLASTIC (20-CM)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM)
	7N-9017	[2]	TERMINAL-RING (18-GA TO 22-GA, NO. 10 SCREW)
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
			(EACH KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	9G-9435	[2]	TERMINAL-RING (18-GA TO 22-GA, 3/8-IN SCREW)
7.	345-1697 C	[1]	GUARD AS (ALL WHEEL DRIVE, RH)
8.	345-1698 C	[1]	GUARD AS (ALL WHEEL DRIVE, LH)
9.	345-1699 C	[2]	PLATE
10.	351-8440 C	[1]	HARNESS AS-SENSOR (MOTOR SPEED, LH)
	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	165-0017 G		HOSE (78-IN)
	6V-8731	[1]	UNION
	6V-9169	[1]	NUT (13/16-16-THD)
	9X-3401	[4]	PIN-CONNECTOR (16-GA TO 18-GA)
	9X-3402	[4]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	150-7999	[1]	COUPLING AS-PERMANENT
	155-2271	[1]	KIT-CONNECTING PLUG (4-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
11.	351-8441 C	[1]	HARNESS AS-SENSOR (MOTOR SPEED, RH)
	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	165-0017 G		HOSE (81-IN)
	6V-8731	[1]	UNION
	6V-9169	[1]	NUT (13/16-16-THD)
	9X-3401	[4]	PIN-CONNECTOR (16-GA TO 18-GA)
	9X-3402	[4]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	150-7999	[1]	COUPLING AS-PERMANENT
	155-2271	[1]	KIT-CONNECTING PLUG (4-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
12.	130-5300	[3]	CLIP
13.	132-5789	[1]	CLIP (LADDER)
14.	155-2260 C	[2]	KIT-CONNECTING PLUG (3-PIN)
			(EACH KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
15.	238-0251 CM	[4]	SCREW-BUTTON HEAD (M10X1.5X25-MM)
16.	3K-0360	[1]	SEAL-O-RING
17.	4D-7794	[2]	CLIP
18.	4K-8864	[1]	CLIP (LOOP)
19.	4P-7581	[2]	CLIP (LADDER)
20.	6D-3479	[1]	CLIP (LOOP)
21.	6V-1228 C	[2]	CLIP
22.	6V-3265	[2]	CLIP
23.	8C-8585 CM	[4]	SCREW-BUTTON HEAD (M10X1.5X20-MM)
24.	8T-4121 C	[22]	WASHER-HARD (11X21X2.5-MM THK)
25.	8T-4133 CM	[1]	NUT (M10X1.5-THD)
26.	8T-4136 CM	[1]	BOLT (M10X1.5X25-MM)
27.	8T-4137 CM	[12]	BOLT (M10X1.5X20-MM)
28.	9M-8406	[3]	CLIP (LOOP)
29.	9X-8250 C	[1]	CLIP (LOOP)
	C		CHANGE FROM PREVIOUS TYPE
	E		ORDER BY THE CENTIMETER
	G		ORDER BY THE INCH
	M		METRIC PART

Information:

ELECTRICAL AND STARTING SYSTEM

WIRING GP

Engine News

270-5051 Repair Kit (Electrical Connectors) Available for Repairs to Wiring Harnesses with Ampseal 16 and A4E 2 Connectors {0709, 1408}
2006/03/20

Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/13

Operation and Maintenance Manual

Fuses - Replace
140M Motor Grader

Circuit Breakers - Reset
140M Motor Grader

Battery Disconnect Switch
140M Motor Grader

Engine Shutdown Switch
140M Motor Grader

Engine Shutdown Switch - Check
140M Motor Grader

Battery or Battery Cable - Inspect/Replace
140M Motor Grader

Special Instruction

Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}

Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}

AMPSEAL 16 ConnectorSystem{7553}
AMPSEAL 16 ConnectorSystem{7553}

Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}

Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}

Bypass Valve Installation for Improved Cold Start{1386, 1387, 1408, 3154, 5057}
Bypass Valve Installation for Improved Cold Start{1386, 1387, 1408, 3154, 5057}

A Procedure to Calibrate the Steering on Certain Motor Graders{430S, 4313, 4343, 7300, 7451, 7506}
A Procedure to Calibrate the Steering on Certain Motor Graders{430S, 4313, 4343, 7300, 7451, 7506}

Selecting the Correct Part Numbers for Sensors and Connectors{1439, 7553}
Selecting the Correct Part Numbers for Sensors and Connectors{1439, 7553}

Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}

Procedure for Replacing Sensor Harnesses and Installing Harness Guards for the AWD Motor Speed Sensors on Certain Series M-Series Motor Graders{1408, 4351, 4803}
Procedure for Replacing Sensor Harnesses and Installing Harness Guards for the AWD Motor Speed Sensors on Certain Series M-Series Motor Graders{1408, 4351, 4803}

Installation of CAESultra for Landfill Compactors, Motor Graders, Wheel Dozers, and Wheel Loaders{1408, 7009, 7010, 7338, 733T, 7490, 7604}
Installation of CAESultra for Landfill Compactors, Motor Graders, Wheel Dozers, and Wheel Loaders{1408, 7009, 7010, 7338, 733T, 7490, 7604}

Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}

Procedure to Prevent Damage to the Rear Chassis Harness Assembly on Certain Motor Graders{1408}
Procedure to Prevent Damage to the Rear Chassis Harness Assembly on Certain Motor Graders{1408}

Installation Procedure for Front Heated Window Glass on Certain M, M Series 2, and M Series 3 Motor Graders {1408, 7305, 7310}
Installation Procedure for Front Heated Window Glass on Certain M, M Series 2, and M Series 3 Motor Graders {1408, 7305, 7310}

Retrofitting a Right Hand Stamped Door with Heated Glass on Certain M Series, M Series 2, and M Series 3 Motor Graders {1408, 7305, 7308, 7310}
Retrofitting a Right Hand Stamped Door with Heated Glass on Certain M Series, M Series 2, and M Series 3 Motor Graders {1408, 7305, 7308, 7310}

Retrofit for the Heated Glass Wiring on Certain M, M-Series 2, and M-Series 3 Motor Graders with Pre-Phase I Cabs {1408, 7305, 7308, 7310}
Retrofit for the Heated Glass Wiring on Certain M, M-Series 2, and M-Series 3 Motor Graders with Pre-Phase I Cabs {1408, 7305, 7308, 7310}

Installation Procedure for Product Link PL421 Retrofit{7606}
Installation Procedure for Product Link PL421 Retrofit{7606}

Installation Procedure for the 192-7805 Seat Compressor Harness{1408, 7312, 7324}
Installation Procedure for the 192-7805 Seat Compressor Harness{1408, 7312, 7324}

Installation of Automatic Differential Lock on Certain M-Series Motor Graders{1408}
Installation of Automatic Differential Lock on Certain M-Series Motor Graders{1408}

Ground Locations for Certain M-Series and M-Series 2 Motor Graders{1408, 7423}
Ground Locations for Certain M-Series and M-Series 2 Motor Graders{1408, 7423}

DRCP Connector Repair Service Instruction {1408, 7553}
DRCP Connector Repair Service Instruction {1408, 7553}

Procedure to Install a Forward Facing Camera on the Front Cover on Certain Motor Graders{1408, 7348}
Procedure to Install a Forward Facing Camera on the Front Cover on Certain Motor Graders{1408, 7348}

Service Letter-NACD

PRODUCT SUPPORT PROGRAM TO IMPROVE COLD START CAPABILITY ON CERTAIN 120M, 12M, 140M, AND 160M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM TO IMPROVE COLD START CAPABILITY ON CERTAIN 120M, 12M, 140M, AND 160M MOTOR GRADERS

PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING A TEMPERATURE SENSOR IN THE STEERING SYSTEM AND FLASHING NEW SOFTWARE ON CERTAIN 120M, 12M, 140M, 160M, 14M, 16M, AND 24M MOTOR GRADERS
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING A TEMPERATURE SENSOR IN THE STEERING SYSTEM AND FLASHING NEW SOFTWARE ON CERTAIN 120M, 12M, 140M, 160M, 14M, 16M, AND 24M MOTOR GRADERS

PRODUCT SUPPORT PROGRAM FOR REPLACING THE 213-9100 BACKUP ALARM ASSEMBLY ON VARIOUS WHEELED EXCAVATORS, EXCAVATORS, TRACK-TYPE TRACTORS, OFF-HIGHWAY TRUCKS, WHEEL LOADERS, WHEELED DOZERS, SOIL COMPACTORS, PNEUMATIC COMPACTORS, ROAD RECLAIMERS AND MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 213-9100 BACKUP ALARM ASSEMBLY ON VARIOUS WHEELED EXCAVATORS, EXCAVATORS, TRACK-TYPE TRACTORS, OFF-HIGHWAY TRUCKS, WHEEL LOADERS, WHEELED DOZERS, SOIL COMPACTORS, PNEUMATIC COMPACTORS, ROAD RECLAIMERS AND MOTOR GRADERS

PRODUCT SUPPORT PROGRAM FOR REWORKING THE FRONT AXLE ON CERTAIN 120M, 140M, AND 160M MOTOR GRADERS EQUIPPED WITH ALL WHEEL DRIVE (AWD)
PRODUCT SUPPORT PROGRAM FOR REWORKING THE FRONT AXLE ON CERTAIN 120M, 140M, AND 160M MOTOR GRADERS EQUIPPED WITH ALL WHEEL DRIVE (AWD)

PRODUCT SUPPORT PROGRAM FOR REPLACING THE STEERING CYLINDER SENSOR HARNESS ASSEMBLY ON CERTAIN 140M, 160M, AND 14M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE STEERING CYLINDER SENSOR HARNESS ASSEMBLY ON CERTAIN 140M, 160M, AND 14M MOTOR GRADERS

PRODUCT SUPPORT PROGRAM FOR REROUTING THE REAR MAIN CHASSIS ELECTRICAL HARNESS ON CERTAIN 140M AND 160M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REROUTING THE REAR MAIN CHASSIS ELECTRICAL HARNESS ON CERTAIN 140M AND 160M MOTOR GRADERS

PRODUCT SUPPORT PROGRAM FOR REWORKING THE CENTERSHIFT LOCK ON CERTAIN 120M, 120M SERIES 2, 12M, 12M SERIES 2, 140M, 140M SERIES 2, 160M, 160M SERIES 2, AND 14M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE CENTERSHIFT LOCK ON CERTAIN 120M, 120M SERIES 2, 12M, 12M SERIES 2, 140M, 140M SERIES 2, 160M, 160M SERIES 2, AND 14M MOTOR GRADERS

Service Letter-Australia

Service Letter-CFEL

Service Letter-CSARL

Service Letter-Americas

Technical Information Bulletin

Incorrect Serviceability of the Harness on certain M Series Motor Graders{1408}
Incorrect Serviceability of the Harness on certain M Series Motor Graders{1408}

Specifications

Magnetic Switch (Secondary Steering)
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Secondary Steering System

Solenoid Valve (Hydraulic Fan)
12M, 140M and 160M Motor Graders Braking and Hydraulic Fan System

Pressure Sensor (Brake Oil Accumulator) - Use with the <B>251-8256</B> Control Manifold Gp
12M, 140M and 160M Motor Graders Braking and Hydraulic Fan System

Temperature Sensor (Transmission Oil)
120M, 12M, 140M and 160M Motor Graders Power Train

Temperature Sensor (Hydraulic Oil)
12M, 140M and 160M Motor Graders Hydraulic and Steering System

Temperature Sensor (Hydraulic Oil)
120M, 140M and 160M Motor Graders All Wheel Drive

Speed Sensor (Transmission) - Intermediate
120M, 12M, 140M and 160M Motor Graders Power Train

Pressure Sensor (Secondary Steering)
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Secondary Steering System

Pressure Switch (AWD Oil Filter Bypass) - Charge
120M, 140M and 160M Motor Graders All Wheel Drive

Toggle Switch (Ground Level Shutdown)
120M, 12M, 140M and 160M Motor Graders Machine Systems

Position Sensor (Articulation)
120M, 12M, 140M and 160M Motor Graders Machine Systems

Speed Sensor (Transmission) - Input and Output
120M, 12M, 140M and 160M Motor Graders Power Train

Ball Switch (Centershift Indicator)
120M, 12M, 140M and 160M Motor Graders Machine Systems

Speed Sensor (Piston Motor)
120M, 140M and 160M Motor Graders All Wheel Drive

Pressure Switch (Parking Brake)
120M, 12M, 140M and 160M Motor Graders Power Train

Pressure Sensor (All Wheel Drive)
120M, 140M and 160M Motor Graders All Wheel Drive

Position Sensor (Articulation)
120M, 12M, 140M and 160M Motor Graders Machine Systems

Pressure Sensor (Brake Oil Accumulator)
12M, 140M and 160M Motor Graders Braking and Hydraulic Fan System

Wiring (Air Inlet Heater)
C9 Engines for Caterpillar Built Machines

Pressure Switch (Parking Brake)
120M, 12M, 140M and 160M Motor Graders Power Train

Tool Operating Manual

Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}

Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}

Service Letter-China

Service Letter-Asia

Systems Operation

Pressure Switch (Refrigerant)
Air Conditioning and Heating R134a for All Caterpillar Machines

Reuse And Salvage Guidelines

Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}

Service Letter-APD

Testing and Adjusting

Electric Starting System - Test
C9 Engines for Caterpillar Built Machines

Electrical Connector - Inspect
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System

Magnetic Switch (Secondary Steering Relay) - Test
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Secondary Steering System

Wiring Harness (Short Circuit) - Test
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

Wiring Harness (Open Circuit) - Test
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

Wiring Harness (Open Circuit) - Test
120M, 12M, 140M and 160M Motor Graders All Wheel Drive Electronic Control System

Wiring Harness (Short Circuit) - Test
120M, 12M, 140M and 160M Motor Graders All Wheel Drive Electronic Control System

Electrical Connector - Inspect
120M, 12M, 140M, 14M, 160M, 16M and 24M Motor Graders Monitoring System

Wiring Harness (Open Circuit) - Test
120M, 12M, 140M, 14M, 160M, 16M and 24M Motor Graders Monitoring System

Wiring Harness (Short Circuit) - Test
120M, 12M, 140M, 14M, 160M, 16M and 24M Motor Graders Monitoring System

Electrical Connector - Inspect
120M, 12M, 140M and 160M Motor Graders All Wheel Drive Electronic Control System

Electrical Connector - Inspect
Product Link - PL522/523

Wiring Harness (Open Circuit) - Test
Product Link - PL522/523

Wiring Harness (Short Circuit) - Test
Product Link - PL522/523

Electrical Connector - Inspect
Product Link 121S/300

Wiring Harness (Open Circuit) - Test
Product Link 121S/300

Wiring Harness (Short Circuit) - Test
Product Link 121S/300

System Schematic
Machine Security System (MSS3i) Integrated

Connector Contact Description
Cat^® Grade Control Cross Slope System for Motor Graders

Troubleshooting

Connector Locations
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

MID 027 - CID 0070 - FMI 03
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

MID 027 - CID 0070 - FMI 04
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

MID 027 - CID 0144 - FMI 03
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

MID 027 - CID 0144 - FMI 05
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

MID 027 - CID 0144 - FMI 06
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

MID 027 - CID 0420 - FMI 03
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

MID 027 - CID 0420 - FMI 05
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

MID 027 - CID 0420 - FMI 06
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

MID 027 - CID 0444 - FMI 03
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

MID 027 - CID 0444 - FMI 05
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

MID 027 - CID 0444 - FMI 06
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

MID 027 - CID 1326 - FMI 02
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

Switch Circuits
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

MID 082 - CID 0490 - FMI 03
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System

MID 082 - CID 0490 - FMI 04
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System

MID 027 - CID 0368 - FMI 03
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

MID 027 - CID 0368 - FMI 04
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

Wiring Information
C9 Engines for Motor Graders

Electrical Connectors - Inspect
C9 Engines for Motor Graders

Connector Locations
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System

Power Supply Circuit of Electronic Control Module
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System

MID 027 - CID 2304 - FMI 03
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

MID 027 - CID 2304 - FMI 05
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

MID 027 - CID 2304 - FMI 06
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

MID 027 - CID 0627 - FMI 03
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

MID 027 - CID 0627 - FMI 04
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

Power Supply Circuit of Electronic Control Module
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

Connector Locations
120M, 12M, 140M and 160M Motor Graders All Wheel Drive Electronic Control System

Power Supply Circuit of Electronic Control Module
120M, 12M, 140M and 160M Motor Graders All Wheel Drive Electronic Control System

Indicator Lamp Does Not Illuminate During the Power Up Self Test
120M, 12M, 140M and 160M Motor Graders All Wheel Drive Electronic Control System

Indicator Lamp Is On Continuously
120M, 12M, 140M and 160M Motor Graders All Wheel Drive Electronic Control System

Switch Circuits
120M, 12M, 140M and 160M Motor Graders All Wheel Drive Electronic Control System

Electrical Connectors
C9 Engines for Motor Graders

Connector Locations
120M, 12M, 140M, 14M, 160M, 16M and 24M Motor Graders Monitoring System

MID 075 - CID 0517 - FMI 03
120M, 12M, 140M and 160M Motor Graders All Wheel Drive Electronic Control System

MID 075 - CID 0517 - FMI 04
120M, 12M, 140M and 160M Motor Graders All Wheel Drive Electronic Control System

MID 145 - CID 0650 - FMI 02
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System

MID 145 - CID 1326 - FMI 02
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System

MID 082 - CID 1326 - FMI 02
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System

MID 122 - CID 0269 - FMI 03
Product Link 121S/300

MID 122 - CID 0269 - FMI 04
Product Link 121S/300

MID 027 - CID 2976 - FMI 03
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

MID 027 - CID 2976 - FMI 04
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

MID 027 - CID 2976 - FMI 08
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

Wiring Harness (Open Circuit) - Test
Cat^® Grade Control Cross Slope System for Motor Graders

Wiring Harness (Short Circuit) - Test
Cat^® Grade Control Cross Slope System for Motor Graders

Disassembly and Assembly

Battery - Remove and Install
140M Motor Grader Engine Supplement

Service Magazine

Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2012/05/04

Service of the Machined Terminals and the Stamped and Formed Terminals {7553}
2006/11/13

A New Chassis Harness is Now Available Without a Diode Which Will Prevent Engine Overheating on Asphalt Pavers {1408}
2007/08/27

Updated Instruction For The Bypass Harness {0785, 1408}
2008/03/17

A New Cable for the Alternator is Available for 140M Motor Graders {1408, 1417, 1422, 1463}
2009/04/20

Improvements to the Fuel Sender Group {1273, 1408, 6201, 7481, 7857}
2011/01/06

A New Circuit Breaker and a Cover are Available for the High Intensity Discharge Lights on Certain Motor Graders {1420, 1434}
2009/12/21

New Wiring Harnesses Are Now Used on Certain M-Series Motor Graders {1408}
2010/02/10

A New Design for the Secondary Steering Relay is Now Used on Some M-Series Motor Graders {1408, 4344, 7499}
2009/12/24

Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/12

New Steering Cylinder Sensor Harnesses are now Available for Certain M Series Motor Graders {1408}
2011/05/09

Heated Anti-Icing Glass is Now Available for Certain M and M Series 2 Motor Graders {1408, 7305, 7308, 7310}
2011/12/26

Improvements Have Been Made to the Steering Position Sensing System on Certain M Series Motor Graders {1408, 430S, 7620}
2012/01/11

Striped Wire Is Replaced With Improved Ink Jet Identification for Legacy (Parts Service) Wire harnesses {1408}
2012/06/08

Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553, 7556}
2012/05/08

Information On Battery Cables and Wire Assemblies for Assembling at Dealer Site {4459}
2012/09/21

New Joystick Kit Is Now Available as a Service Replacement for Push Button Faceplate on Certain M Series and M Series 2 Motor Graders {1408, 3168, 4343, 5063, 5705}
2013/06/13

An Improved Starting Motor Is Used on Certain C7 Machine Engines {1408, 1453}
2014/06/06

A New Flasher Assembly for the Turn Signal Is Now Available for Certain M and M Series 2 Motor Graders {1408}
2014/01/15

An Improved Routing Process is Now Available When Replacing 192-7805 Harness As in TLV1 Seat Suspensions on Certain Machines {1408, 7312, 7324}
2013/11/12

Parts are Now Available to Make Jump Start Receptacle on Cat<SUP>®</SUP> Product {1463}
2014/03/04

New Lighting Harness As Is Now Available for Certain M Series, and M Series 2 Motor Graders {1408, 1429}
New Lighting Harness As Is Now Available for Certain M Series, and M Series 2 Motor Graders {1408, 1429}

A New Instrument Cluster is Now Used On Certain M Series and M Series 2 Motor Graders {1408, 7490}
A New Instrument Cluster is Now Used On Certain M Series and M Series 2 Motor Graders {1408, 7490}

Grommets for Antenna Wires are Now Available for Certain Motor Graders {1408, 7301, 733B}
Grommets for Antenna Wires are Now Available for Certain Motor Graders {1408, 7301, 733B}

Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}

The Mounting of the Temperature Sensor for the Steering Temperature Oil Has Been Improved on Certain M and M Series 2 Motor Graders {1408}
The Mounting of the Temperature Sensor for the Steering Temperature Oil Has Been Improved on Certain M and M Series 2 Motor Graders {1408}

A Bolted Joint Best Practice procedure for the Magnetic Switch Group (Main Power Relay) is Now Available {1408, 7499}
A Bolted Joint Best Practice procedure for the Magnetic Switch Group (Main Power Relay) is Now Available {1408, 7499}

New AccuGrade Brackets are Now Used on Certain K and M Series Motor Graders {1408}
New AccuGrade Brackets are Now Used on Certain K and M Series Motor Graders {1408}

New Sensor Harness Assembly for the All-Wheel Drive (AWD) Motor Is Now Used on Certain Motor Graders {1408}
New Sensor Harness Assembly for the All-Wheel Drive (AWD) Motor Is Now Used on Certain Motor Graders {1408}

Caterpillar Parts SIS Catalog 140M :

352-1597 WIRING GP-REAR

352-1596 WIRING GP-REAR

264-7522 WIRING GP-REAR

233-4602 WIRING GP-REAR

233-4601 WIRING GP-REAR

431-4287 WIRING GP-REAR

233-4623 WIRING GP-REAR LIGHTING

247-6430 WIRING GP-REAR LIGHTING

269-4150 WIRING GP-SECONDARY STEERING

235-6194 WIRING GP-SENSOR

Truck sale:

176,000

Caterpillar 140M2, Construction
- motor graders
HOLT CAT

164,000

Caterpillar 140M2, Construction
- motor graders
HOLT CAT

139,800

Caterpillar 140M2, Construction
- motor graders
FOLEY EQUIPMENT COMPANY

Caterpillar TRADE-IN 140M2, Construction
- motor graders
TRACTORS AND EQUIPMENT (I.T.E.) LTD.
Israel

167,614

Caterpillar 140M2, Construction
- motor graders
CAVPOWER
Australia

396-9714 WIRING GP-REAR S/N B9G1-UP PART OF 367-7796, 426-1257 CONVERSION AR-CERTIFICATION, 356-9759 CONVERSION AR-MACHINE, 352-2104 OPTION AR-HYDRAULIC, 364-3738, 367-7799 OPTION AR-REGIONAL AN ATTACHMENT 140M

ELECTRICAL AND STARTING SYSTEM

396-9714: WIRING GP-REAR

Parts for your 140M MOTOR GRADER:

431-4287: WIRING GP-REAR

Parts for your 140M MOTOR GRADER:

233-4623: WIRING GP-REAR LIGHTING

Parts for your 140M MOTOR GRADER:

233-4623: WIRING GP-REAR LIGHTING

Parts for your 140M MOTOR GRADER:

233-4623: WIRING GP-REAR LIGHTING

Parts for your 140M MOTOR GRADER:

247-6430: WIRING GP-REAR LIGHTING

Parts for your 140M MOTOR GRADER:

247-6430: WIRING GP-REAR LIGHTING

Parts for your 140M MOTOR GRADER:

269-4150: WIRING GP-SECONDARY STEERING

Parts for your 140M MOTOR GRADER:

235-6194: WIRING GP-SENSOR

Parts for your 140M MOTOR GRADER:

235-6194: WIRING GP-SENSOR

Parts for your 140M MOTOR GRADER:

Information:

Caterpillar Parts SIS Catalog 140M :

Truck sale:

Modal