AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

262-5766 CYLINDER GP-STEERING S/N B9G1-UP 76.2-MM (3-IN) BORE X 305-MM (12-IN) STROKE PART OF 260-8709 CYLINDER & MTG GP-STEERING 140M


HYDRAULIC SYSTEM
CYLINDER GP
DRIVE GP
FILTER GP
HYDRAULIC GP
LINES GP-HYDRAULIC

MOTOR GRADER 140M MOTOR GRADER B9G
 140M Motor Grader - All Wheel Drive B9G00001-UP (MACHINE) POWERED BY C9 Engine SEBP5029 140M B9G   (2008)

HYDRAULIC SYSTEM

CYLINDER GP
CYLINDER GP-SIDESHIFT
249-4116 CYLINDER GP-SIDESHIFT
CYLINDER GP-SIDESHIFT
509-6993 CYLINDER GP-SIDESHIFT
CYLINDER GP-STEERING
262-5766 CYLINDER GP-STEERING
CYLINDER GP-WHEEL LEAN
249-5299 CYLINDER GP-WHEEL LEAN
CYLINDER GP-HYDRAULIC
217-3501 CYLINDER GP-HYDRAULIC
CYLINDER GP-HYDRAULIC
255-8000 CYLINDER GP-HYDRAULIC
 

#SEBP50291040
 

262-5766: CYLINDER GP-STEERING

262-5766 CYLINDER GP-STEERING
S/N B9G1-UP
76.2-MM (3-IN) BORE X 305-MM (12-IN) STROKE
PART OF 260-8709 CYLINDER & MTG GP-STEERING
i02249869 SEBP5029
2625766 CYLINDER GP-STEERING Parts scheme
  For full view, you need register

Parts for your 140M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-8737 [1] PLUG-SEAL  
2. 102-2244 [1] GROMMET  
3. 151-7038 [1] HEAD  
4. 212-0907 [1] PLATE-CONNECTOR  
5. 214-6480 [1] PISTON  
6. 217-3311 [1] MAGNET (RING)  
7. 276-1816 [1] GUARD  
8. 242-9514 [1] CARRIER  
9. 242-9515 [1] RING-RETAINING  
10. 262-5768 [1] CYLINDER AS  
11. 262-5769 [1] ROD AS  
12. 289-2935 [1] SEAL AS-BUFFER  
13. 289-2946 [1] SEAL-U-CUP  
14. 188-2199 [1] SEAL-O-RING  
15. 1H-7339 [1] SEAL-O-RING  
16. 215-1942 [1] RING-BACKUP  
17. 223-3353 [1] RING-WEAR  
18. 308-1845 [1] SEAL-WIPER  
19. 262-5906 [1] SENSOR GP-POSITION (STEERING CYLINDER)  
  9X-3401 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
20. 102-8804 [1] KIT-RECEPTACLE (4-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
21. 3V-2431 [2] WASHER (10.2X16X2-MM THK)  
22. 4S-5565 [2] BOLT (3/8-16X0.875-IN)  
23. 4T-5613 [1] RING-WEAR  
24. 5J-4561 [1] LOCKNUT (1-14-THD)  
25. 6J-1972 [1] SEAL AS  
27. 6J-5731 [1] RING-BACKUP  
28. 8T-5070 [1] SETSCREW-SOCKET (3/8-16X0.5-IN)  
30. 9X-1386 E SLEEVE (8.5-CM)  
30A. 9X-1386 E SLEEVE (3-CM)  
31. 162-0177 [1] PLUG AS  
  9S-8004 [1] PLUG (9/16-18-THD)  
  3J-1907 [1] SEAL-O-RING  
  E   ORDER BY THE CENTIMETER
 

#SEBP50291041
 

249-5299: CYLINDER GP-WHEEL LEAN

249-5299 CYLINDER GP-WHEEL LEAN
S/N B9G1-UP
88.9-MM (3.5-IN) BORE X 149-MM (5.87-IN) STROKE
PART OF 260-8713 CYLINDER & MTG GP-WHEEL LEAN
i02189514 SEBP5029
2495299 CYLINDER GP-WHEEL LEAN Parts scheme
  For full view, you need register

Parts for your 140M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 251-1550 [1] CYLINDER AS  
1A. 2G-8631 [1] BUSHING  
2. 173-9683 M [1] BOLT (M30X3.5X90-MM)  
3. 9X-8399 [1] WASHER (33X56X6-MM THK)  
4. 4T-8054 J [1] SEAL AS  
5. 7J-9885 J [1] RING-WEAR  
6. 9T-9040 [1] PISTON  
7. 175-7898 J [1] SEAL-O-RING  
8. 1S-0669 J [1] RING (BACKUP)  
9. 6E-4974 [1] HEAD  
  308-1845 [1] SEAL-WIPER  
10. 121-9245 [1] ROD AS  
10A. 2G-8631 [1] BUSHING  
11. 308-1845 J [1] SEAL-WIPER  
12. 356-8331 J [1] SEAL-U-CUP  
13. 289-2935 J [1] SEAL AS-BUFFER  
14. 4T-5613 J [1] RING-WEAR  
   
    AVAILABLE REPAIR KIT(S):
  376-9011 J [1] KIT-HYD CYLINDER SEAL  
    (INCLUDES RINGS & SEALS)
    (FOR USE WITH REHS1392)
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP50291042
 

253-4677: DRIVE GP-CIRCLE

253-4677 DRIVE GP-CIRCLE
S/N B9G1-241
PART OF 321-2930 COMMON AR
i02248423 SEBP5029
2534677 DRIVE GP-CIRCLE Parts scheme 2534677 DRIVE GP-CIRCLE Parts scheme
  For full view, you need register

Parts for your 140M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1B-4038 [2] CUP-BEARING  
2. 1B-4046 [2] CONE-BEARING  
3. 2G-0478 [5] PLATE-CLUTCH  
4. 2G-6695 [1] BRACKET  
5. 5K-5288 [1] SEAL GP-DUO-CONE  
  5K-5129 [2] RING-SEALING  
6. 6G-5533 [1] GEAR-WORM (36-TEETH)  
7. 6G-5534 [1] COVER AS  
  6G-5537 [1] BEARING  
8. 6G-5538 [1] COVER  
9. 6G-5542 [2] SPACER (119.2X178X9.3-MM THK)  
10. 6G-6122 [1] SPRING-DISC  
11. 6Y-7953 [6] DISC-FRICTION  
12. 7D-8983 B [10] SHIM (0.005-IN THK)  
13. 7D-8984 B [6] SHIM (0.007-IN THK)  
14. 8D-7423 [1] WASHER-SPECIAL (81.03X48.41X1.6MM THK)  
15. 8D-7424 [1] SPACER (48X81X6-MM THK)  
16. 8T-0336 [1] FITTING-PRESSURE RELIEF  
17. 312-0782 [1] WORM-CIRCLE DRIVE  
18. 9D-1491 [1] COUPLING  
19. 105-3196 Y [1] MOTOR GP-GEROTOR (CIRCLE DRIVE)  
20. 253-4678 [1] HOUSING AS-DRIVE  
  2D-8154 [4] STUD-TAPERLOCK (1/2-13X2.36-IN)  
  8D-7426 [1] BUSHING  
  160-0011 M [4] STUD-TAPERLOCK (M20X2.5X85-MM)  
21. 261-8553 [1] PINION-CIRCLE DRIVE  
22. 307-1958 [1] SHAFT-PINION DRIVE  
23. 307-1959 B [6] SHIM (0.13-MM THK)(0.2-MM THK)  
24. 307-1960 B [1] SHIM (0.25-MM THK)(0.3-MM THK)  
25. 307-1961 [1] PLATE  
26. 307-1962 B [4] SHIM (0.5-MM THK)(0.5-MM THK)  
27. 0S-1585 [4] BOLT (1/2-13X1.5-IN)  
28. 1A-1415 [1] NUT (1-7/8-12-THD)  
29. 1B-5174 [1] PLUG-PIPE  
30. 1F-7958 [4] NUT-FULL (1/2-13-THD)  
31. 1H-7339 [1] SEAL-O-RING  
32. 2B-7410 [1] PLUG-PIPE (OIL DRAIN)  
33. 2H-9247 [1] SEAL-O-RING  
34. 4F-9653 [1] SEAL-O-RING  
35. 4H-6996 [1] PIN-SPRING  
36. 5H-4909 [1] SEAL-O-RING  
37. 5K-8454 [3] BOLT (1/2-13X1.12-IN)  
38. 5P-8245 [16] WASHER-HARD (13.5X25.5X3-MM THK)  
39. 5S-7379 [4] BOLT (3/8-16X0.875-IN)  
40. 6G-5539 [1] GASKET  
41. 6G-5548 [1] SPACER (69.5X89X0.8-MM THK)  
42. 6H-1717 [5] BOLT (1/2-13X1.125-IN)  
43. 6V-5686 M [3] BOLT (M16X2X50-MM)  
44. 8D-5054 [3] WASHER-HARD (17X30X3-MM THK)  
45. 8D-7425 [2] WASHER-THRUST (2.81X4.25X0.12-IN THK)  
46. 8T-4896 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP50291043
 

253-4677: DRIVE GP-CIRCLE

253-4677 DRIVE GP-CIRCLE
S/N B9G242-1056
PART OF 321-2930, 349-2552 COMMON AR
i04035909 SEBP5029
2534677 DRIVE GP-CIRCLE Parts scheme 2534677 DRIVE GP-CIRCLE Parts scheme
  For full view, you need register

Parts for your 140M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1B-4038 [2] CUP-BEARING  
2. 1B-4046 [2] CONE-BEARING  
3. 2G-0478 [5] PLATE-CLUTCH  
4. 2G-6695 [1] BRACKET  
5. 5K-5288 [1] SEAL GP-DUO-CONE  
  5K-5129 [2] RING-SEALING  
6. 323-8674 C [1] GEAR-WORM (36-TEETH)  
7. 6G-5534 [1] COVER AS  
  6G-5537 [1] BEARING  
8. 6G-5538 [1] COVER  
9. 6G-5542 [2] SPACER (119.2X178X9.3-MM THK)  
10. 6G-6122 [1] SPRING-DISC  
11. 6Y-7953 [6] DISC-FRICTION  
12. 7D-8983 B [10] SHIM (0.005-IN THK)  
13. 7D-8984 B [6] SHIM (0.007-IN THK)  
14. 8D-7423 [1] WASHER-SPECIAL (81.03X48.41X1.6MM THK)  
15. 8D-7424 [1] SPACER (48X81X6-MM THK)  
16. 8T-0336 [1] FITTING-PRESSURE RELIEF  
17. 323-8675 C [1] WORM-CIRCLE DRIVE  
18. 9D-1491 [1] COUPLING  
19. 105-3196 Y [1] MOTOR GP-GEROTOR (CIRCLE DRIVE)  
20. 253-4678 [1] HOUSING AS-DRIVE  
  2D-8154 [4] STUD-TAPERLOCK (1/2-13X2.36-IN)  
  8D-7426 [1] BUSHING  
  286-2631 M [4] STUD-TAPERLOCK (M20X2.5X85-MM)  
21. 261-8553 [1] PINION-CIRCLE DRIVE  
22. 307-1958 [1] SHAFT-PINION DRIVE  
23. 307-1959 B [6] SHIM (0.13-MM THK)  
24. 307-1960 B [1] SHIM (0.25-MM THK)  
25. 307-1961 [1] PLATE  
26. 307-1962 B [4] SHIM (0.5-MM THK)  
27. 0S-1585 [4] BOLT (1/2-13X1.5-IN)  
28. 1A-1415 [1] NUT (1-7/8-12-THD)  
29. 1B-5174 [1] PLUG-PIPE  
30. 1F-7958 [4] NUT-FULL (1/2-13-THD)  
31. 1H-7339 [1] SEAL-O-RING  
32. 2B-0858 [1] PLUG-PIPE (OIL DRAIN)  
33. 2H-9247 [1] SEAL-O-RING  
34. 4F-9653 [1] SEAL-O-RING  
35. 4H-6996 [1] PIN-SPRING  
36. 5H-4909 [1] SEAL-O-RING  
37. 5K-8454 [3] BOLT (1/2-13X1.12-IN)  
38. 5P-8245 [16] WASHER-HARD (13.5X25.5X3-MM THK)  
39. 5S-7379 [4] BOLT (3/8-16X0.875-IN)  
40. 6G-5539 [1] GASKET  
41. 6G-5548 [1] SPACER (69.5X89X0.8-MM THK)  
42. 6H-1717 [5] BOLT (1/2-13X1.125-IN)  
43. 6V-5686 M [3] BOLT (M16X2X50-MM)  
44. 8D-5054 [3] WASHER-HARD (17X30X3-MM THK)  
45. 8D-7425 [2] WASHER-THRUST (2.81X4.25X0.12-IN THK)  
46. 8T-4896 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP50291044
 

250-3507: FILTER & MTG GP-HYDRAULIC

250-3507 FILTER & MTG GP-HYDRAULIC
S/N B9G1-UP
PART OF 231-5061 SERVICE CENTER AR
i02178358 SEBP5029
2503507 FILTER & MTG GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 140M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 148-8407 [1] PLUG AS  
  9S-4191 [1] PLUG (9/16-18-THD)  
  3J-1907 [1] SEAL-O-RING  
3. 242-0407 [1] VALVE AS-DRAIN (HYDRAULIC FILTER)  
4. 245-7603 [1] TUBE AS  
5. 245-8964 [1] BLOCK  
6. 249-2307 Y [1] FILTER GP-OIL (HYDRAULIC TANK RETURN)  
7. 257-8897 [1] HOSE-MOLDED  
8. [2] PLUG AS  
    (EACH INCLUDES)
  9S-4183 [1] PLUG (1-1/16-12-THD)  
  3D-2824 [1] SEAL-O-RING  
9. 156-4283 [1] CONNECTOR AS  
  8T-7926 [1] CONNECTOR  
  6K-6307 [1] SEAL-O-RING  
  8T-0315 [1] SEAL-O-RING  
10. 294-9701 [1] TUBE AS  
11. 294-9702 [1] TUBE AS  
12. 4J-0524 [2] SEAL-O-RING  
13. 7X-2543 M [2] BOLT (M10X1.5X120-MM)  
14. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
15. 8T-4133 M [2] NUT (M10X1.5-THD)  
16. 8T-4183 M [8] BOLT (M12X1.75X40-MM)  
17. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
18. 8T-4223 [8] WASHER-HARD (13.5X25.5X3-MM THK)  
19. 8T-6703 [4] CLAMP-HOSE  
20. 8X-5489 [1] SLEEVE  
21. 122-6908 G HOSE-HYDRAULIC (6.3-IN)  
22. 9X-2023 E HOSE (31-CM)  
  E   ORDER BY THE CENTIMETER
  G   ORDER BY THE INCH
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP50291045
 

191-9784: FILTER GP-OIL

191-9784 FILTER GP-OIL
S/N B9G1-UP
PART OF 237-6423, 355-0117, 473-0556 LINES GP-PUMP
ALSO AN ATTACHMENT
i01441603 SEBP5029
1919784 FILTER GP-OIL Parts scheme
  For full view, you need register

Parts for your 140M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1G-8878 [1] FILTER-OIL (ADVANCED EFFICIENCY)(HYDRAULIC)  
2. 7X-8549 [1] SWITCH AS-PRESSURE (FILTER BYPASS)  
  3J-1907 [1] SEAL-O-RING  
3. 8C-3451 [1] CAP-DUST (HYDRAULIC OIL)  
4. 183-7264 [1] VALVE AS-FLUID SAMPLING (FILTER OIL)  
4A. 3J-1907 SEAL-O-RING  
 

#SEBP50291046
 

249-2307: FILTER GP-OIL

249-2307 FILTER GP-OIL
S/N B9G1-UP
INTERNAL BYPASS
PART OF 250-3507 FILTER & MTG GP-HYDRAULIC
i02909000 SEBP5029
2492307 FILTER GP-OIL Parts scheme
  For full view, you need register

Parts for your 140M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 338-3540 [1] FILTER ELEMENT-OIL (ULTRA HIGH EFFICIENCY)(HYDRAULIC TANK)  
2. 321-5967 C [1] HOUSING GP-FILTER (OIL)  
  9S-8004 [1] PLUG (9/16-18-THD)  
  214-7568 [1] SEAL-O-RING  
3. 249-2308 Y [1] BASE GP-OIL FILTER (HYDRAULIC TANK RETURN)  
4. 214-7568 [1] SEAL-O-RING  
5. 6V-5048 [1] SEAL-O-RING  
6. 9S-4185 [1] PLUG (3/4-16-THD)  
7. 9S-4191 [1] PLUG (9/16-18-THD)  
8. 130-0229 [1] SEAL-O-RING  
   
  8L-2786 F [1] SEAL-O-RING  
  C   CHANGE FROM PREVIOUS TYPE
  F   NOT SHOWN
  Y   SEPARATE ILLUSTRATION
 

#SEBP50291047
 

248-0443: HYDRAULIC AR

248-0443 HYDRAULIC AR -ALL WHEEL DRIVE
S/N B9G1-UP
BIODEGRADABLE HYDRAULIC OIL
AN ATTACHMENT
i02235877 SEBP5029
  For full view, you need register

Parts for your 140M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  141-6968 [1] FILM-IDENTIFICATION (BIODEGRADABLE HYDRAULIC OIL)  
    ATTACH FILM NEAR IMPLEMENT OIL FILL
 

#SEBP50291048
 

275-5890: LINES & MTG GP-SNOW WING

275-5890 LINES & MTG GP-SNOW WING
S/N B9G1-UP
PART OF 275-5904 BLADE & MTG GP-SNOW, 275-5902 MOUNTING GP-SNOW WING
AN ATTACHMENT
i03343853 SEBP5029
2755890 LINES & MTG GP-SNOW WING Parts scheme
  For full view, you need register

Parts for your 140M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4B-5327 [1] WASHER (41.2X76.2X4-MM THK)  
2. 8W-4516 I [3] HOSE AS  
3. 104-8625 I [2] HOSE AS  
4. 212-4650 I [1] HOSE AS  
5. 239-6232 I [1] HOSE AS  
6. 277-5547 [1] KIT-HARDWARE (FRONT)  
  7X-2489 M [14] BOLT (M24X3X100-MM)  
  114-6099 M [6] BOLT (M24X3X80-MM)  
  198-4782 [14] WASHER-HARD (26X47X12-MM THK)  
  267-3506 [12] WASHER-HARD (26X44X4-MM THK)  
  268-8262 M [6] NUT (M24X3-THD)  
7. 277-5548 [1] BULKHEAD AS  
8. 277-5552 [1] KIT-HARDWARE (REAR)  
  7X-2563 M [6] BOLT (M20X2.5X60-MM)  
  8T-4131 M [6] NUT (M20X2.5-THD)  
  9X-2615 M [6] BOLT (M24X3X60-MM)  
  106-4175 M [8] BOLT (M20X2.5X60-MM)  
  267-3506 [6] WASHER-HARD (26X44X4-MM THK)  
  267-3508 [20] WASHER-HARD (22X35X3.5-MM THK)  
9. 298-3387 [1] BRACE AS (LOWER)  
  338-1405 B [16] SHIM (1-MM THK)  
  338-1406 B [2] SHIM (0.5-MM THK)  
  329-1389 M [1] NUT (M30X3.5-THD)  
10. 298-3390 [1] BRACE AS (UPPER)  
  338-1405 B [16] SHIM (1-MM THK)  
  338-1406 B [2] SHIM (0.5-MM THK)  
  329-1389 M [1] NUT (M30X3.5-THD)  
11. 331-9951 [1] BOLT (1-1/2-12X9.5-IN)  
12. 299-3401 [1] NUT-HEX SLOTTED (1-1/2-12-THD)  
13. 3B-4647 [1] PIN-COTTER  
14. 3J-1907 [4] SEAL-O-RING  
15. 3K-0360 [4] SEAL-O-RING  
16. 5P-1076 [3] WASHER-HARD (13.5X30X4-MM THK)  
17. 6V-7676 M [4] NUT (M24X3-THD)  
18. 6V-8397 [13] SEAL-O-RING  
19. 6V-8398 [3] SEAL-O-RING  
20. 6V-8634 [3] CONNECTOR  
21. 6V-8636 [3] CONNECTOR  
22. 6V-8639 [1] CONNECTOR  
23. 6V-8724 [1] ELBOW  
24. 6V-8980 [3] ELBOW  
25. 6V-8981 [1] ELBOW  
26. 6V-9168 [3] NUT (11/16-16-THD)  
27. 6V-9169 [1] NUT (13/16-16-THD)  
28. 7X-2577 M [4] BOLT (M24X3X90-MM)  
29. 8T-4167 [8] WASHER-HARD (26X44X4-MM THK)  
30. 8T-4956 M [3] BOLT (M12X1.75X35-MM)  
  B   USE AS REQUIRED
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP50291049
 

231-1515: LINES GP-CENTERSHIFT LOCK

231-1515 LINES GP-CENTERSHIFT LOCK
S/N B9G1-1056
PART OF 321-2930, 349-2552 COMMON AR, 364-1991 OPTION AR-MACHINE
ALSO AN ATTACHMENT
i02235532 SEBP5029
2311515 LINES GP-CENTERSHIFT LOCK Parts scheme
  For full view, you need register

Parts for your 140M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 125-0327 I [1] HOSE AS  
2. 150-3074 [1] ORIFICE AS  
  110-5266 [1] ORIFICE (1.6-MM)  
  3J-1907 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
3. 205-5596 [2] SPACER (11X15X35-MM THK)  
4. 259-7140 M [2] STUD-TAPERLOCK (M10X1.5X80-MM)  
5. 266-9737 I [1] HOSE AS  
6. 096-4883 M [2] LOCKNUT (M10X1.5-THD)  
7. 112-9442 I [1] HOSE AS  
8. 148-8336 [2] CONNECTOR AS  
    (EACH INCLUDES)
  6V-8636 [1] CONNECTOR  
  3J-1907 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
9. 148-8367 [1] ELBOW AS (45-DEG)  
  6V-9850 [1] ELBOW  
  6V-8397 [1] SEAL-O-RING  
10. 148-8378 [1] ELBOW AS (90-DEG)  
  6V-8724 [1] ELBOW (90-DEG)  
  3J-1907 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
11. 1S-0994 [1] CLIP (LOOP)  
12. 4D-7735 [2] CLIP  
13. 8T-4121 [3] WASHER-HARD (11X21X2.5-MM THK)  
14. 8T-4136 M [1] BOLT (M10X1.5X25-MM)  
15. 132-2453 [1] UNION  
16. 6E-4701 Y [1] VALVE GP-CHECK  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Operation and Maintenance Manual
Blade Lift Cylinder Socket - Lubricate
140M Motor Grader
Centershift Cylinder Socket - Lubricate
140M Motor Grader
Ripper Cylinder Bearings - Lubricate
140M Motor Grader
Steering Cylinder Ends and Tie Rods - Lubricate
140M Motor Grader
Wheel Lean Bearings - Lubricate
140M Motor Grader
Blade Lift Cylinder Socket - Check/Adjust/Replace
140M Motor Grader
Centershift Cylinder Socket - Check/Adjust/Replace
140M Motor Grader
Special Instruction
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
A Procedure to Calibrate the Steering on Certain Motor Graders{430S, 4313, 4343, 7300, 7451, 7506}
A Procedure to Calibrate the Steering on Certain Motor Graders{430S, 4313, 4343, 7300, 7451, 7506}
Procedure to Rework the Scarifier Bracket Group on Certain Motor Graders{5213, 6162}
Procedure to Rework the Scarifier Bracket Group on Certain Motor Graders{5213, 6162}
Front Axle Steering Cylinder Hose Guard for Certain M Series Motor Graders{7164}
Front Axle Steering Cylinder Hose Guard for Certain M Series Motor Graders{7164}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Disassembly and Assembly Procedure for 255-8000 Hydraulic Cylinder Gp (Snow Wing){7562}
Disassembly and Assembly Procedure for 255-8000 Hydraulic Cylinder Gp (Snow Wing){7562}
Instructions For Installing Steering Cylinders With Position Sensors On Certain Motor Graders {4303, 7620}
Instructions For Installing Steering Cylinders With Position Sensors On Certain Motor Graders {4303, 7620}
Technical Information Bulletin
Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Drifting May Occur in the Articulation System on Certain M, M Series 2, and M Series 3 Motor Graders {5265}
Drifting May Occur in the Articulation System on Certain M, M Series 2, and M Series 3 Motor Graders {5265}
Specifications
Centershift Cylinder Mounting
120M, 12M, 140M and 160M Motor Graders Machine Systems
Blade Lift Cylinder Mounting
120M, 12M, 140M and 160M Motor Graders Machine Systems
Wheel Lean Cylinder (All Wheel Drive)
120M, 140M and 160M Motor Graders All Wheel Drive
Steering Cylinder (All Wheel Drive)
120M, 140M and 160M Motor Graders All Wheel Drive
Articulation Cylinder
12M, 140M and 160M Motor Graders Hydraulic and Steering System
Blade Tip Cylinder
12M, 140M and 160M Motor Graders Hydraulic and Steering System
Centershift Cylinder
12M, 140M and 160M Motor Graders Hydraulic and Steering System
Ripper Lift Cylinder
12M, 140M and 160M Motor Graders Hydraulic and Steering System
Sideshift Cylinder
12M, 140M and 160M Motor Graders Hydraulic and Steering System
Wheel Lean Cylinder
12M, 140M and 160M Motor Graders Hydraulic and Steering System
Articulation Cylinder Mounting
120M, 12M, 140M and 160M Motor Graders Machine Systems
Steering Cylinder and Mounting
120M, 140M and 160M Motor Graders All Wheel Drive
Steering Cylinder (All Wheel Drive)
12M, 140M and 160M Motor Graders Hydraulic and Steering System
Blade Lift Cylinder
12M, 140M and 160M Motor Graders Hydraulic and Steering System
Tool Operating Manual
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Manual Length Measurement and Calibration of Position Sensors for Steering Cylinders {0738, 0759, 4303}
Manual Length Measurement and Calibration of Position Sensors for Steering Cylinders {0738, 0759, 4303}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Contamination Control Guidelines
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Testing and Adjusting
Hydraulic Cylinder Drift - Check
12M, 140M and 160M Motor Graders Hydraulic and Steering System
Cylinder Cycle Time - Check
12M, 140M and 160M Motor Graders Hydraulic and Steering System
Steering System - Purge
12M, 140M and 160M Motor Graders Hydraulic and Steering System
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Troubleshooting
MID 082 - CID 2200 - FMI 00
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
MID 082 - CID 2200 - FMI 03
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
MID 082 - CID 2200 - FMI 04
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
MID 082 - CID 2200 - FMI 08
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
MID 082 - CID 2200 - FMI 13
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
MID 082 - CID 2201 - FMI 02
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
MID 082 - CID 2200 - FMI 02
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
MID 082 - CID 2201 - FMI 03
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
MID 082 - CID 2201 - FMI 04
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
MID 082 - CID 2201 - FMI 08
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
MID 082 - CID 2201 - FMI 13
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
MID 082 - CID 2200 - FMI 01
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
MID 082 - CID 2201 - FMI 00
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
MID 082 - CID 2201 - FMI 01
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
MID 082 - CID 2200 - FMI 14
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
MID 082 - CID 2201 - FMI 14
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
MID 027 - CID 2200 - FMI 00
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
MID 027 - CID 2200 - FMI 01
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
MID 027 - CID 2200 - FMI 02
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
MID 027 - CID 2200 - FMI 03
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
MID 027 - CID 2200 - FMI 04
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
MID 027 - CID 2200 - FMI 08
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
MID 027 - CID 2200 - FMI 13
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
MID 027 - CID 2200 - FMI 14
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
MID 027 - CID 2201 - FMI 00
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
MID 027 - CID 2201 - FMI 01
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
MID 027 - CID 2201 - FMI 02
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
MID 027 - CID 2201 - FMI 03
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
MID 027 - CID 2201 - FMI 04
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
MID 027 - CID 2201 - FMI 08
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
MID 027 - CID 2201 - FMI 13
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
MID 027 - CID 2201 - FMI 14
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
Disassembly and Assembly
Steering Cylinder - Remove and Install
140M Motor Grader
Wheel Lean Cylinder - Remove and Install
140M Motor Grader
Centershift Cylinder - Remove and Install
140M Motor Grader
Sideshift Cylinder - Remove and Install
140M Motor Grader
Blade Tip Cylinder - Remove and Install
140M Motor Grader
Ripper Lift Cylinder - Remove and Install
140M Motor Grader
Blade Lift Cylinder - Remove and Install
140M Motor Grader
Articulation Cylinder - Remove and Install - Left Side
140M Motor Grader
Articulation Cylinder - Remove and Install - Right Side
140M Motor Grader
Scarifier Cylinder - Remove and Install
140M Motor Grader
Steering Cylinder - Remove and Install
140M Motor Grader
Service Magazine
A New Hopper Lift Cylinder is Now Used on the Asphalt Pavers {7562}
2005/07/11
A New Hydraulic Extender Cylinder is Now Used on the Front Mounted Asphalt Screeds {5057}
2005/10/31
Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2012/10/04
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
2011/10/17
Blade Lift Modulation that is Selectable is Available {5063, 5102, 7300, 7451, 7610, 7620}
2009/09/07
New Parts Update the Seal Kit for the Centershift Cylinders and the Lift Cylinders on Certain Motor Graders {5102, 5223}
2009/11/18
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30
New U-Cup Seal are Available with a Narrow Width to Service Cylinders in the Field {4303, 5101, 5102, 5104, 5456, 5457, 5458, 7562}
2010/12/24
Optional Guards are Now Available for Certain M Series and M Series 2 Motor Graders {7164}
2013/06/04
An Updated Procedure is Available for the Blade Tip Cylinder on Certain 120H, 120M, 12H, 12M, 140H, 140M, 143H, 14H, 160H, 160M, 163H, and 16H Motor Graders {5106, 7562}
2011/08/09
New Shear Pin for Circle Group Is Now Available for Certain Motor Graders Used in Snow Removal Applications {5106}
New Shear Pin for Circle Group Is Now Available for Certain Motor Graders Used in Snow Removal Applications {5106}
Cat<SUP>&reg;</SUP> Reman Announces the Availability of Remanufactured Hydraulic Rods and Cylinders for Certain Cat Machines {7562}
2015/08/21
The Assembly Procedure For The Blade Lift Cylinder Has Been Improved On Certain Motor Graders {5102}
2015/02/27
New Steering Cylinders With Position Sensors are Now Available on Certain Motor Graders {4303, 7620}
New Steering Cylinders With Position Sensors are Now Available on Certain Motor Graders {4303, 7620}
Cat<SUP>&reg;</SUP> Reman Announces Remanufactured Cylinders For Motor Grader Applications {4303, 5102, 5106, 5211, 5213, 5223, 5229, 5265}
2015/07/21
Improved Blade Lift Cylinder Yoke Bolts Are Now Used On Certain K and M Series Motor Graders {5102}
Improved Blade Lift Cylinder Yoke Bolts Are Now Used On Certain K and M Series Motor Graders {5102}

Caterpillar Parts SIS Catalog 140M :

CYLINDER GP-SIDESHIFT
509-6993 CYLINDER GP-SIDESHIFT
CYLINDER GP-SIDESHIFT
249-4116 CYLINDER GP-SIDESHIFT
CYLINDER GP-SCARIFIER
165-2510 CYLINDER GP-SCARIFIER
CYLINDER GP-SCARIFIER
165-2510 CYLINDER GP-SCARIFIER
CYLINDER GP-RIPPER
326-2227 CYLINDER GP-RIPPER
CYLINDER GP-RIPPER
113-7754 CYLINDER GP-RIPPER
CYLINDER GP-LIFT
335-1974 CYLINDER GP-LIFT
CYLINDER GP-LIFT
262-1900 CYLINDER GP-LIFT
CYLINDER GP-WHEEL LEAN
249-5299 CYLINDER GP-WHEEL LEAN
DRIVE GP-CIRCLE
253-4677 DRIVE GP-CIRCLE
DRIVE GP-CIRCLE
253-4677 DRIVE GP-CIRCLE
FILTER & MTG GP-HYDRAULIC
250-3507 FILTER & MTG GP-HYDRAULIC
FILTER GP-OIL
191-9784 FILTER GP-OIL
FILTER GP-OIL
249-2307 FILTER GP-OIL
248-0443 HYDRAULIC AR
LINES & MTG GP-SNOW WING
275-5890 LINES & MTG GP-SNOW WING

Truck sale:

Caterpillar 140M2, Construction
176,000 
Caterpillar 140M2, Construction
- motor graders
HOLT CAT
Caterpillar 140M2, Construction
164,000 
Caterpillar 140M2, Construction
- motor graders
HOLT CAT
Caterpillar 140M2, Construction
139,800 
Caterpillar 140M2, Construction
- motor graders
FOLEY EQUIPMENT COMPANY
Caterpillar TRADE-IN 140M2, Construction
 
Caterpillar TRADE-IN 140M2, Construction
- motor graders
TRACTORS AND EQUIPMENT (I.T.E.) LTD.
Israel
Caterpillar 140M2, Construction
167,614 
Caterpillar 140M2, Construction
- motor graders
CAVPOWER
Australia
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.