ELECTRICAL AND STARTING SYSTEM
ALTERNATOR GP-CHARGINGCONTROL GP-UNPROGRAMMED
BATTERY GP
CAMERA GP
ELECTRONICS GP-ENGINE
ELECTRICAL AND STARTING SYSTEM
ALTERNATOR GP-CHARGING
#SEBP50300350
253-2724: ALTERNATOR GP-CHARGING
253-2724 ALTERNATOR GP-CHARGING -WITH AIR CONDITIONER
S/N D9G1-UP
150-AMPERE
PART OF 349-8291 OPTION AR-ROADING, 261-0187 SNOW AR-MOTOR GRADER
CANNOT BE USED WITH @@@@@246-6701@@@@@, @@@@@246-6715@@@@@, @@@@@253-2723@@@@@
AN ATTACHMENT
S/N D9G1-UP
150-AMPERE
PART OF 349-8291 OPTION AR-ROADING, 261-0187 SNOW AR-MOTOR GRADER
CANNOT BE USED WITH @@@@@246-6701@@@@@, @@@@@246-6715@@@@@, @@@@@253-2723@@@@@
AN ATTACHMENT
For full view, you need register
Parts for your 140M MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 129-5096 | [1] | PULLEY-ALTERNATOR (8-GROOVE) | |
| 2. | 354-0672 | [1] | PULLEY AS-IDLER | |
| 3. | 169-3130 Y | [1] | MOUNTING GP-ALTERNATOR | |
| 4. | 249-0313 | [1] | ALTERNATOR GP-CHARGING (24-VOLT, 150-AMPERE) | |
| 5. | 263-1786 | [1] | SPACER | |
| 6. | 348-7886 | [1] | BELT-SERPENTINE | |
| 7. | 264-7021 | [1] | GUARD AS-BELT | |
| 8R-8088 | [2] | SPACER (11.66X15.88X18-MM THK) | ||
| 8. | 266-6025 | [1] | BRACKET AS | |
| 9. | 268-5817 | [1] | FILM-INSTRUCTION (BELT ROUTING) | |
| 10. | 6V-8188 | [1] | NUT (1/2-13-THD) | |
| 11. | 7X-0481 | [1] | BOLT (1/2-13X8-IN) | |
| 12. | 8T-4121 | [2] | WASHER-HARD (11X21X2.5-MM THK) | |
| 13. | 8T-4186 M | [2] | BOLT (M10X1.5X40-MM) | |
| 14. | 8T-4223 | [3] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 15. | 8T-4835 | [1] | BOLT (1/2-13X2-IN) | |
| 16. | 285-9066 M | [1] | BOLT (M8X1.25X65-MM) | |
| 17. | 5P-4116 | [1] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 18. | 145-2901 | [1] | COVER-DUST | |
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP50300351
463-9613: APPLICATION GP-MONITOR
463-9613 APPLICATION GP-MONITOR -NETWORK MANAGER
S/N D9G1-UP
PART OF 456-3346, 456-3347, 456-3348 CONTROL GP-COMMUNICATION
AN ATTACHMENT
S/N D9G1-UP
PART OF 456-3346, 456-3347, 456-3348 CONTROL GP-COMMUNICATION
AN ATTACHMENT
For full view, you need register
Parts for your 140M MOTOR GRADER:
CATERPILLAR SIS#SEBP50300352
463-9614: APPLICATION GP-MONITOR
463-9614 APPLICATION GP-MONITOR -CELLULAR
S/N D9G1-UP
PART OF 456-3347, 456-3348 CONTROL GP-COMMUNICATION
AN ATTACHMENT
S/N D9G1-UP
PART OF 456-3347, 456-3348 CONTROL GP-COMMUNICATION
AN ATTACHMENT
For full view, you need register
Parts for your 140M MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 440-2104 Y | [1] | CONTROL GP-UNPROGRAMMED (PL641I CELLULAR) | ||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP50300353
463-9615: APPLICATION GP-MONITOR
463-9615 APPLICATION GP-MONITOR -PRODUCT LINK 631 SATELLITE
S/N D9G1-UP
PART OF 456-3346, 456-3348 CONTROL GP-COMMUNICATION
AN ATTACHMENT
S/N D9G1-UP
PART OF 456-3346, 456-3348 CONTROL GP-COMMUNICATION
AN ATTACHMENT
For full view, you need register
Parts for your 140M MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 442-7199 Y | [1] | CONTROL GP-UNPROGRAMMED (PRODUCT LINK ELITE 631 SATELLITE) | ||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP50300354
233-4611: BATTERY & WIRING GP
233-4611 BATTERY & WIRING GP -EXTREME SERVICE
S/N D9G1-UP
PART OF 349-3053, 349-3071, 349-8290 OPTION AR-COLD WEATHER, 242-9549, 261-0187 SNOW AR-MOTOR GRADER
CANNOT BE USED WITH @@@@@236-1924@@@@@
AN ATTACHMENT
S/N D9G1-UP
PART OF 349-3053, 349-3071, 349-8290 OPTION AR-COLD WEATHER, 242-9549, 261-0187 SNOW AR-MOTOR GRADER
CANNOT BE USED WITH @@@@@236-1924@@@@@
AN ATTACHMENT
For full view, you need register
Parts for your 140M MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [4] | STRAP-CABLE | |
| 2. | 7N-0718 Y | [1] | SWITCH GP-DISCONNECT (BATTERY) | |
| 3. | 9G-2758 J | [1] | LOCKOUT-SWITCH (BATTERY DISCONNECT) | |
| 4. | 9R-6414 | [2] | ROD | |
| 5. | 153-5710 | [2] | BATTERY GP (12-VOLT, MAINTENANCE FREE, WET) | |
| (EACH INCLUDES) | ||||
| 123-1373 | [6] | CAP AS-FILLER (7/8-9-THD)(NEGATIVE) | ||
| 461-5232 | [6] | CAP AS-FILLER (POSITIVE) | ||
| 6. | 188-3959 | [1] | BRACKET | |
| 7. | 236-2340 | [1] | CABLE AS-BATTERY (JUMPER) | |
| 8T-9756 | [1] | TERMINAL AS-BATTERY (POSITIVE) | ||
| 8C-5918 | [1] | TERMINAL AS-BATTERY (NEGATIVE) | ||
| (EACH TERMINAL AS INCLUDES) | ||||
| 1M-6119 | [1] | BOLT (5/16-18X1.375-IN) | ||
| 1M-6120 | [1] | NUT (5/16-18-THD) | ||
| 9G-0002 | [1] | COVER AS-TERMINAL (RED) | ||
| 9G-0005 | [1] | COVER AS-TERMINAL (BLACK) | ||
| 159-8049 E | CABLE (00-GA, RED)(17-CM) | |||
| 8. | 246-1670 | [1] | BAR | |
| 9. | 263-6891 | [1] | HOLD-DOWN AS | |
| 10. | 272-7239 | [1] | BLOCK AS | |
| 11. | 388-7676 | [1] | CABLE AS | |
| 4D-1248 | [1] | TERMINAL (00-GA, 3/8-IN SCREW) | ||
| 3S-6050 | [1] | TERMINAL AS-BATTERY (NEGATIVE) | ||
| 1M-6119 | [1] | BOLT (5/16-18X1.375-IN) | ||
| 1M-6120 | [1] | NUT (5/16-18-THD) | ||
| 7N-5274 | [1] | COVER AS-TERMINAL (BLACK) | ||
| 8L-8413 | [1] | STRAP-CABLE (WHITE) | ||
| 9G-0003 | [1] | COVER AS-TERMINAL (BLACK) | ||
| 159-8050 E | CABLE (00-GA, BLACK)(154-CM) | |||
| 12. | 132-1805 | [1] | STRAP AS-GROUND | |
| 13. | 150-4086 M | [4] | SCREW (M4X0.7X16-MM) | |
| 14. | 174-5907 | [4] | CLIP (LOOP) | |
| 15. | 245-8842 | [2] | CLIP (LOOP) | |
| 16. | 7X-7729 | [2] | WASHER (11X25X3-MM THK) | |
| 17. | 8T-0389 M | [2] | LOCKNUT (M10X1.5-THD) | |
| 18. | 8T-4121 | [10] | WASHER-HARD (11X21X2.5-MM THK) | |
| 19. | 8T-4136 M | [7] | BOLT (M10X1.5X25-MM) | |
| 20. | 8T-4137 M | [1] | BOLT (M10X1.5X20-MM) | |
| 21. | 8T-4185 M | [2] | BOLT (M10X1.5X50-MM) | |
| E | ORDER BY THE CENTIMETER | |||
| J | REQUIRES CORPORATE KEY | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP50300355
236-1924: BATTERY & WIRING GP
236-1924 BATTERY & WIRING GP -HEAVY-DUTY
S/N D9G1-UP
PART OF 349-3070 OPTION AR-ELECTRICAL
CANNOT BE USED WITH @@@@@233-4611@@@@@
AN ATTACHMENT
S/N D9G1-UP
PART OF 349-3070 OPTION AR-ELECTRICAL
CANNOT BE USED WITH @@@@@233-4611@@@@@
AN ATTACHMENT
For full view, you need register
Parts for your 140M MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [4] | STRAP-CABLE | |
| 2. | 7N-0718 Y | [1] | SWITCH GP-DISCONNECT (BATTERY) | |
| 3. | 9G-2758 J | [1] | LOCKOUT-SWITCH (BATTERY DISCONNECT) | |
| 4. | 153-5700 | [2] | BATTERY AS (12-VOLT, 1125-CCA)(WET) | |
| 5. | 188-3959 | [1] | BRACKET | |
| 6. | 236-2340 | [1] | CABLE AS-BATTERY (JUMPER) | |
| 8C-5918 | [1] | TERMINAL AS-BATTERY (NEGATIVE) | ||
| 8T-9756 | [1] | TERMINAL AS-BATTERY (POSITIVE) | ||
| (EACH TERMINAL AS INCLUDES) | ||||
| 1M-6119 | [1] | BOLT (5/16-18X1.375-IN) | ||
| 1M-6120 | [1] | NUT (5/16-18-THD) | ||
| 9G-0002 | [1] | COVER AS-TERMINAL (RED) | ||
| 9G-0005 | [1] | COVER AS-TERMINAL (BLACK) | ||
| 159-8049 E | CABLE (00-GA, RED)(17-CM) | |||
| 8. | 246-1670 | [1] | BAR | |
| 9. | 263-6891 | [1] | HOLD-DOWN AS | |
| 11. | 272-7239 | [1] | BLOCK AS | |
| 12. | 388-7676 | [1] | CABLE AS | |
| 4D-1248 | [1] | TERMINAL (00-GA, 3/8-IN SCREW) | ||
| 3S-6050 | [1] | TERMINAL AS-BATTERY (NEGATIVE) | ||
| 1M-6119 | [1] | BOLT (5/16-18X1.375-IN) | ||
| 1M-6120 | [1] | NUT (5/16-18-THD) | ||
| 7N-5274 | [1] | COVER AS-TERMINAL (BLACK) | ||
| 8L-8413 | [1] | STRAP-CABLE (WHITE) | ||
| 9G-0003 | [1] | COVER AS-TERMINAL (BLACK) | ||
| 159-8050 E | CABLE (00-GA, BLACK)(154-CM) | |||
| 14. | 132-1805 | [1] | STRAP AS-GROUND | |
| 15. | 174-5907 | [4] | CLIP (LOOP) | |
| 16. | 245-8842 | [2] | CLIP (LOOP) | |
| 19. | 7X-7729 | [2] | WASHER (11X25X3-MM THK) | |
| 21. | 8T-0389 M | [2] | LOCKNUT (M10X1.5-THD) | |
| 22. | 8T-4121 | [10] | WASHER-HARD (11X21X2.5-MM THK) | |
| 23. | 8T-4136 M | [7] | BOLT (M10X1.5X25-MM) | |
| 24. | 8T-4137 M | [1] | BOLT (M10X1.5X20-MM) | |
| 26. | 8T-4185 M | [2] | BOLT (M10X1.5X50-MM) | |
| 28. | 150-4086 M | [4] | SCREW (M4X0.7X16-MM) | |
| 29. | 9R-6414 | [2] | ROD | |
| E | ORDER BY THE CENTIMETER | |||
| J | REQUIRES CORPORATE KEY | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP50300356
278-1842: CAMERA AR
For full view, you need register
Parts for your 140M MOTOR GRADER:
CATERPILLAR SIS#SEBP50300357
391-4396: CAMERA AR
For full view, you need register
Parts for your 140M MOTOR GRADER:
CATERPILLAR SIS#SEBP50300358
246-9345: CONTROL & MTG GP-ENGINE ELEK
246-9345 CONTROL & MTG GP-ENGINE ELEK
S/N KHX238-UP
PART OF 231-0878 ENGINE AR-COMPLETE
S/N KHX238-UP
PART OF 231-0878 ENGINE AR-COMPLETE
For full view, you need register
Parts for your 140M MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8T-9655 | [8] | MOUNT-ISOLATION | |
| 2. | 101-3128 | [4] | SPACER-SPECIAL (12.7X26X28.7-MM THK) | |
| 3. | 143-9392 M | [4] | STUD (M8X1.25-THD) | |
| 4. | 226-7473 Y | [1] | CONTROL GP-ENGINE ELECTRONIC | |
| 5. | 206-6875 | [4] | CAP-TUBE | |
| 6. | 244-3168 | [1] | BRACKET AS (HARNESS) | |
| 232-1693 M | [1] | BOLT-FLANGE HEAD (M6X1X35-MM) | ||
| 7. | 233-0891 | [1] | BRACKET AS (HARNESS) | |
| 232-1693 M | [1] | BOLT-FLANGE HEAD (M6X1X35-MM) | ||
| 8. | 9M-1974 | [4] | WASHER-HARD (8.8X16X2-MM THK) | |
| 9. | 9N-0869 | [4] | WASHER-HARD (8.8X25.5X2-MM THK) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP50300359
246-9365: CONTROL & MTG GP-ENGINE ELEK
246-9365 CONTROL & MTG GP-ENGINE ELEK
S/N TXD1-UP; THX22745-UP
PART OF 349-4444, 351-0371, 387-8570, 387-8578, 457-9755 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
S/N TXD1-UP; THX22745-UP
PART OF 349-4444, 351-0371, 387-8570, 387-8578, 457-9755 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
For full view, you need register
Parts for your 140M MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8T-9655 | [8] | MOUNT-ISOLATION | |
| 2. | 101-3128 | [4] | SPACER-SPECIAL | |
| 3. | 143-9392 M | [4] | STUD (M8X1.25-THD) | |
| 4. | 226-7473 Y | [1] | CONTROL GP-ENGINE ELECTRONIC | |
| 6. | 233-0891 | [1] | BRACKET AS | |
| 232-1693 M | [1] | BOLT-FLANGE HEAD (M6X1X35-MM) | ||
| 7. | 9M-1974 | [4] | WASHER-HARD (8.8X16X2-MM THK) | |
| 8. | 9N-0869 | [4] | WASHER-HARD (8.8X25.5X2-MM THK) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
