OPERATOR STATION
HEATER GPSEAT GP
INSTALLATION GP-CONTROLS
BRAKING SYSTEM
CONTROL GPOPERATOR STATION
DOOR GPCONTROL GP-ELECTROHYDRAULIC
MIRROR GP
OPERATOR STATION
HEATER GP
#SEBP50301380
261-0839: HEATER AR-CAB
261-0839 HEATER AR-CAB
S/N D9G1-UP
CANNOT BE USED WITH @@@@@261-0775@@@@@
AN ATTACHMENT
S/N D9G1-UP
CANNOT BE USED WITH @@@@@261-0775@@@@@
AN ATTACHMENT
For full view, you need register
Parts for your 140M MOTOR GRADER:
CATERPILLAR SIS#SEBP50301381
233-3130: HEATER GP-CAB
233-3130 HEATER GP-CAB
S/N D9G1-UP
PART OF 249-0407, 261-0839 HEATER AR-CAB
AN ATTACHMENT
S/N D9G1-UP
PART OF 249-0407, 261-0839 HEATER AR-CAB
AN ATTACHMENT
For full view, you need register
Parts for your 140M MOTOR GRADER:
CATERPILLAR SIS#SEBP50301382
244-2699: HEATER GP-CAB
For full view, you need register
Parts for your 140M MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [2] | STRAP-CABLE | |
| 2. | 6T-6708 | [2] | WASHER (7X28.6X4.1-MM THK) | |
| 3. | 125-9740 | [1] | RESISTOR | |
| 4. | 133-9012 C | [2] | FUSE (15-AMPERE) | |
| 5. | 249-0934 | [1] | CASE AS | |
| 6. | 249-0938 | [1] | CASE | |
| 7. | 263-9466 | [1] | PLATE | |
| 8. | 265-7435 | [1] | GASKET | |
| 9. | 273-0336 | [1] | SEAL | |
| 10. | 273-0338 | [1] | PLUG | |
| 11. | 273-0339 | [1] | PLUG | |
| 12. | 273-0340 | [2] | CAP | |
| 13. | 273-0342 | [1] | FILM-IDENTIFICATION (SERIAL NUMBER) | |
| 14. | 276-9015 | [1] | HARNESS AS-MOTOR (HVAC) | |
| 102-8806 | [1] | KIT-RECEPTACLE (8-PIN) | ||
| 177-9645 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (EACH KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 7T-0093 | [2] | PIN-CONNECTOR (12-GA TO 14-GA) | ||
| 8T-8729 | [4] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8737 | [1] | PLUG-SEAL | ||
| 9W-0852 | [3] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 100-6674 | [3] | SEAL-CONNECTOR | ||
| 118-5125 | [1] | CLIP | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM) | |||
| 5P-5618 | [3] | TERMINAL-BLADE (10-GA TO 12-GA) | ||
| 5P-4571 | [5] | TERMINAL-BLADE (14-GA TO 16-GA) | ||
| 2L-8067 | [2] | TERMINAL-RING (10-GA TO 12-GA, 1/4-IN SCREW) | ||
| 15. | 278-1442 Y | [1] | COIL GP-HEATER | |
| 16. | 278-3354 | [1] | FILM-INSTRUCTION (HVAC WATER, DRAINING, FILLING) | |
| 17. | 279-1124 | [1] | GROMMET | |
| 18. | 322-6674 C | [1] | PLATE | |
| 19. | 322-6675 C | [1] | PLATE AS | |
| 20. | 466-7341 C | [1] | FAN AS (24-VOLT, A/C, HEATER) | |
| 1F-7958 | [1] | NUT-FULL (1/2-13-THD) | ||
| 21. | 328-8755 C | [1] | WIRE AS | |
| 22. | 129-3178 CM | [5] | LOCKNUT (M6X1-THD) | |
| 23. | 132-5793 C | [2] | SCREW-WASHER HEAD (4-40X0.25-IN) | |
| 24. | 141-9784 M | [1] | BOLT (M6X1X190-MM) | |
| 25. | 6V-1668 | [2] | WASHER (6.5X29.1X3-MM THK) | |
| 26. | 8T-4205 C | [10] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 27. | 9X-2038 | [4] | WASHER (7X19X2-MM THK) | |
| 28. | 9X-2044 CM | [14] | SCREW-TRUSS HEAD (M6X1X16-MM) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP50301383
174-2231: HOUSING GP-SEAT SUSPENSION
174-2231 HOUSING GP-SEAT SUSPENSION
S/N D9G1-UP
PART OF 160-7165 SUSPENSION GP-SEAT
AN ATTACHMENT
S/N D9G1-UP
PART OF 160-7165 SUSPENSION GP-SEAT
AN ATTACHMENT
For full view, you need register
Parts for your 140M MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1Y-7927 | [1] | PIN | |
| 2. | 2D-6235 | [2] | LOCKNUT (1/4-20-THD) | |
| 3. | 2M-7819 | [4] | RING-RETAINING | |
| 4. | 3D-2975 | [2] | RING-RETAINING | |
| 5. | 4B-5059 | [6] | WASHER (15X29.5X2.5-MM THK) | |
| 6. | 4N-2927 | [2] | RACE-THRUST BEARING | |
| 7. | 5D-4822 | [2] | RING-RETAINING | |
| 8. | 5P-8445 | [4] | RING-RETAINING | |
| 9. | 5V-0770 | [2] | BOLT-CARRIAGE (1/4-20X0.74-IN) | |
| 10. | 7M-7219 | [1] | BEARING-THRUST | |
| 11. | 7V-5191 | [2] | SPACER (28X10X7.1-MM THK) | |
| 12. | 8L-8413 | [2] | STRAP-CABLE (WHITE) | |
| 13. | 8S-7803 | [4] | RING-RETAINING | |
| 14. | 8Y-6041 | [1] | ARM AS | |
| 15. | 8Y-6045 | [1] | CAM | |
| 16. | 8Y-6046 | [1] | PIN | |
| 17. | 8Y-6047 | [2] | PIN | |
| 18. | 8Y-6060 | [2] | ROLLER | |
| 19. | 8Y-6062 | [1] | LINK-ACTUATOR | |
| 20. | 8Y-6063 | [1] | LINK-ACTUATOR | |
| 21. | 8Y-6064 | [2] | ROLLER-SLIDER | |
| 22. | 8Y-6066 | [1] | SPRING | |
| 23. | 8Y-6067 | [1] | SPACER (10.54-MM THK) | |
| 24. | 8Y-6068 | [1] | NUT (3/8X16-THD) | |
| 25. | 8Y-6069 | [1] | ADJUSTER AS | |
| 26. | 9X-8918 | [3] | SCREW-FLAT HEAD (8-32X0.5-IN) | |
| 27. | 095-0878 | [1] | PIN-SPRING | |
| 28. | 131-4242 | [1] | BOLT (3/8-16X5.18-IN) | |
| 29. | 131-5167 | [1] | KNOB AS-ADJUSTMENT (SEAT SUSPENSION) | |
| 30. | 161-5967 | [1] | SHAFT | |
| 31. | 174-2237 | [1] | FRAME AS-SUSPENSION | |
| 32. | JZ | [1] | KNOB-HEIGHT (SEAT SUSPENSION) | |
| 33. | JZ | [1] | KNOB-HEIGHT (SEAT SUSPENSION) | |
| 34. | LZ | [2] | SPRING | |
| 35. | LZ | [2] | BUSHING | |
| 36. | VZ | [2] | SPRING | |
| 37. | VZ | [2] | SPACER | |
| 38. | VZ | [2] | BUSHING-GUIDE | |
| 39. | VZ | [2] | ROD | |
| 40. | PZ | [1] | TAPE-INDICATOR | |
| 41. | PZ | [1] | GUIDE | |
| 42. | SZ | [1] | PIN | |
| 43. | SZ | [1] | FOLLOWER-CAM | |
| 44. | TZ | [1] | PIN | |
| 45. | TZ | [1] | FOLLOWER-CAM | |
| 46. | UZ | [2] | ROLLER AS | |
| 47. | UZ | [1] | ROLLER AS | |
| 48. | QZ | [3] | BUMPER | |
| AVAILABLE REPAIR KIT(S): | ||||
| 8Y-5945 J | [1] | KIT-SUSPENSION KNOB (HEIGHT ADJUSTMENT)(SUSPENSION SEAT) | ||
| 8Y-6859 L | [1] | KIT-SPRING (SUSPENSION SEAT) | ||
| 8Y-6860 V | [1] | KIT-SPRING (HEIGHT ADJUSTMENT)(SUSPENSION SEAT) | ||
| 100-3224 P | [1] | KIT-INDICATOR (WEIGHT ADJUSTMENT)(SUSPENSION SEAT) | ||
| 100-5179 Q | [1] | KIT-BUMPER (WEIGHT ADJUSTMENT)(SUSPENSION SEAT) | ||
| 108-4086 S | [1] | KIT-FOLLOWER (SUSPENSION SEAT) | ||
| 108-4087 T | [1] | KIT-FOLLOWER (SUSPENSION SEAT) | ||
| 108-4103 U | [1] | KIT-BEARING (SUSPENSION SEAT) | ||
| J | KIT MARKED J INCLUDES PART(S) MARKED J | |||
| L | KIT MARKED L INCLUDES PARTS MARKED L AND RETAINING RING | |||
| P | KIT MARKED P INCLUDES PARTS MARKED P AND CABLE STRAP | |||
| Q | KIT MARKED Q INCLUDES PART(S) MARKED Q | |||
| S | KIT MARKED S INCLUDES PART(S) MARKED S | |||
| T | KIT MARKED T INCLUDES PART(S) MARKED T | |||
| U | KIT MARKED U INCLUDES PART(S) MARKED U | |||
| V | KIT MARKED V INCLUDES PART(S) MARKED V | |||
| Z | NOT SERVICED SEPARATELY | |||
#SEBP50301384
463-6258: INSTALLATION GP-CONTROLS
463-6258 INSTALLATION GP-CONTROLS -JOYSTICK
S/N D9G1-UP
PART OF 526-3698 KIT-RETROFIT
S/N D9G1-UP
PART OF 526-3698 KIT-RETROFIT
For full view, you need register
Parts for your 140M MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 434-2232 Y | [1] | CONTROL GP-JOYSTICK (LH) | ||
| 434-2233 Y | [1] | CONTROL GP-JOYSTICK (RH) | ||
| 438-3108 Y | [1] | HARNESS AS-WIRING (JOYSTICK) | ||
| 458-7887 Y | [1] | HARNESS AS-WIRING (CONSOLE, RH) | ||
| 458-7888 Y | [1] | HARNESS AS-WIRING (YW ADAPTER) | ||
| 457-7811 | [1] | FILM-IDENTIFICATION (GRADE CONTROL) | ||
| 457-7812 | [1] | FILM-IDENTIFICATION (INSTRUCTION) | ||
| 251-2247 | [2] | GROMMET | ||
| 458-7889 | [1] | HARNESS AS-WIRING (ECM) | ||
| 8T-8737 | [1] | PLUG-SEAL | ||
| 9X-3402 | [14] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [14] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 155-2259 | [1] | WEDGE-PLUG LOCK (8-PIN) | ||
| 155-2265 | [1] | KIT-CONNECTING PLUG (8-PIN) | ||
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP50301385
473-5233: KIT-CAB
For full view, you need register
Parts for your 140M MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 438-8077 | [1] | BIN-STORAGE | ||
| 438-8078 | [1] | BIN-STORAGE | ||
| 214-9186 | [5] | BUTTON | ||
| 443-6429 | [1] | FLOOR MAT AS | ||
| 445-0466 | [2] | INSERT | ||
| 463-6185 | [1] | LINER | ||
| 463-6186 | [1] | LINER | ||
| 441-7480 | [1] | PLATE AS | ||
| 9R-2672 M | [1] | BOSS-THREADED (M10X1.5X120-MM) | ||
| 9R-2821 M | [1] | BOSS (M10X1.5X15-MM) | ||
| 355-5860 | [6] | RECEPTACLE (CLIP) | ||
| 212-6891 | [6] | RETAINER | ||
| 419-8564 | [2] | STRAP | ||
| 448-3613 | [1] | STRAP | ||
| 334-6090 | [6] | STUD | ||
| 417-6775 | [1] | TRAY | ||
| M | METRIC PART | |||
#SEBP50301386
352-4102: KIT-DOOR
For full view, you need register
Parts for your 140M MOTOR GRADER:
CATERPILLAR SIS#SEBP50301387
416-0165: KIT-JOYSTICK CONTROL
For full view, you need register
Parts for your 140M MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| (NO SERVICED PARTS) | ||||
| (INCLUDES FACEPLATE ASSEMBLY, ESD GROUNDING WRIST STRAP ASM, CONNECTOR REMOVAL TOOL, ROLY SWABS, PRE-MOISTENED TOWELETTES, CABLE TIES, SCREWS-SPARES, GREASE SYRINGE, BIT-TORX, PAPER TOWELS, LABEL & PLASTIC ESD SHEET) | ||||
#SEBP50301388
466-5233: KIT-MIRROR
466-5233 KIT-MIRROR
S/N D9G1-UP
CONTAINS OPTIONAL SIDE (HEATED) MIRROR EXTENSIONS. NEW EXTENSIONS IMPROVE THE REAR VISIBILITY FOR OPERATOR
FIELD INSTALLATION
S/N D9G1-UP
CONTAINS OPTIONAL SIDE (HEATED) MIRROR EXTENSIONS. NEW EXTENSIONS IMPROVE THE REAR VISIBILITY FOR OPERATOR
FIELD INSTALLATION
For full view, you need register
Parts for your 140M MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 351-4424 | [1] | ARM AS (RH) | ||
| 351-4425 | [1] | ARM AS (LH) | ||
| 8T-4182 M | [4] | BOLT (M10X1.5X45-MM) | ||
| 8T-6466 M | [8] | BOLT (M10X1.5X60-MM) | ||
| 351-4485 | [2] | BRACKET | ||
| 200-1173 | [2] | MIRROR AS (HEATED) | ||
| (EACH INCLUDES) | ||||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 344-5675 M | [4] | NUT (M10X1.5-THD) | ||
| 3S-2093 | [12] | STRAP-CABLE | ||
| 7X-7729 | [8] | WASHER (11X25X3-MM THK) | ||
| 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | ||
| (ABOVE PARTS CAN BE REFERENCED TO 351-4490 MIRROR GROUP) | ||||
| M | METRIC PART | |||
#SEBP50301389
466-5255: KIT-MIRROR
466-5255 KIT-MIRROR
S/N D9G1-UP
CONTAINS OPTIONAL SIDE (STANDARD) MIRROR EXTENSIONS. NEW EXTENSIONS IMPROVE THE REAR VISIBILITY FOR OPERATOR
FIELD INSTALLATION
S/N D9G1-UP
CONTAINS OPTIONAL SIDE (STANDARD) MIRROR EXTENSIONS. NEW EXTENSIONS IMPROVE THE REAR VISIBILITY FOR OPERATOR
FIELD INSTALLATION
For full view, you need register
Parts for your 140M MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 351-4424 | [1] | ARM AS (RH) | ||
| 351-4425 | [1] | ARM AS (LH) | ||
| 8T-4182 M | [4] | BOLT (M10X1.5X45-MM) | ||
| 8T-6466 M | [8] | BOLT (M10X1.5X60-MM) | ||
| 351-4485 | [2] | BRACKET | ||
| 214-0647 | [2] | MIRROR AS | ||
| 344-5675 M | [4] | NUT (M10X1.5-THD) | ||
| 7X-7729 | [8] | WASHER (11X25X3-MM THK) | ||
| 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | ||
| (ABOVE PARTS CAN BE REFERENCED TO 351-4490 MIRROR GROUP) | ||||
| M | METRIC PART | |||
