249-5299 CYLINDER GP-WHEEL LEAN S/N B9T1-UP 88.9-MM (3.5-IN) BORE X 149-MM (5.87-IN) STROKE PART OF 260-8713 CYLINDER & MTG GP-WHEEL LEAN 160M

HYDRAULIC SYSTEM

CYLINDER GP

0. 249-5299 CYLINDER G

DRIVE GP

1. 253-4677 DRIVE GP-C
2. 253-4677 DRIVE GP-C

FILTER GP

3. 250-3507 FILTER & M
4. 191-9784 FILTER GP-
5. 249-2307 FILTER GP-

HYDRAULIC GP

6. 248-0443 HYDRAULIC

LINES GP-HYDRAULIC

7. 275-5890 LINES & MT
8. 275-5891 LINES & MT
9. 231-1515 LINES GP-C
0. INFORMATION

MOTOR GRADER 160M MOTOR GRADER B9T
160M Motor Grader - All Wheel Drive B9T00001-UP (MACHINE) POWERED BY C9 Engine SEBP5031 160M B9T (2007)

HYDRAULIC SYSTEM

CYLINDER GP

509-6993 CYLINDER GP-SIDESHIFT

262-5766 CYLINDER GP-STEERING

249-5299 CYLINDER GP-WHEEL LEAN

217-3501 CYLINDER GP-HYDRAULIC

255-8000 CYLINDER GP-HYDRAULIC

277-3811 CYLINDER GP-HYDRAULIC

#SEBP50310910

249-5299: CYLINDER GP-WHEEL LEAN

CYLINDER GP-WHEEL LEAN

249-5299 CYLINDER GP-WHEEL LEAN
S/N B9T1-UP
88.9-MM (3.5-IN) BORE X 149-MM (5.87-IN) STROKE
PART OF 260-8713 CYLINDER & MTG GP-WHEEL LEAN

i02189514 SEBP5031

2495299 CYLINDER GP-WHEEL LEAN Parts scheme

For full view, you need register

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	251-1550	[1]	CYLINDER AS
1A.	2G-8631	[1]	BUSHING
2.	173-9683 M	[1]	BOLT (M30X3.5X90-MM)
3.	9X-8399	[1]	WASHER (33X56X6-MM THK)
4.	4T-8054 J	[1]	SEAL AS
5.	7J-9885 J	[1]	RING-WEAR
6.	9T-9040	[1]	PISTON
7.	175-7898 J	[1]	SEAL-O-RING
8.	1S-0669 J	[1]	RING (BACKUP)
9.	6E-4974	[1]	HEAD
	308-1845	[1]	SEAL-WIPER
10.	121-9245	[1]	ROD AS
10A.	2G-8631	[1]	BUSHING
11.	308-1845 J	[1]	SEAL-WIPER
12.	356-8331 J	[1]	SEAL-U-CUP
13.	289-2935 J	[1]	SEAL AS-BUFFER
14.	4T-5613 J	[1]	RING-WEAR

			AVAILABLE REPAIR KIT(S):
	376-9011 J	[1]	KIT-HYD CYLINDER SEAL
			(INCLUDES RINGS & SEALS)
			(FOR USE WITH REHS1392)
	J		KIT MARKED J SERVICES PART(S) MARKED J
	M		METRIC PART
	R		REMANUFACTURED PART MAY BE AVAILABLE

#SEBP50310911

253-4677: DRIVE GP-CIRCLE

DRIVE GP-CIRCLE

253-4677 DRIVE GP-CIRCLE
S/N B9T1-153
PART OF 321-2933 COMMON AR

i02248423 SEBP5031

For full view, you need register

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1B-4038	[2]	CUP-BEARING
2.	1B-4046	[2]	CONE-BEARING
3.	2G-0478	[5]	PLATE-CLUTCH
4.	2G-6695	[1]	BRACKET
5.	5K-5288	[1]	SEAL GP-DUO-CONE
	5K-5129	[2]	RING-SEALING
6.	6G-5533	[1]	GEAR-WORM (36-TEETH)
7.	6G-5534	[1]	COVER AS
	6G-5537	[1]	BEARING
8.	6G-5538	[1]	COVER
9.	6G-5542	[2]	SPACER (119.2X178X9.3-MM THK)
10.	6G-6122	[1]	SPRING-DISC
11.	6Y-7953	[6]	DISC-FRICTION
12.	7D-8983 B	[10]	SHIM (0.005-IN THK)
13.	7D-8984 B	[6]	SHIM (0.007-IN THK)
14.	8D-7423	[1]	WASHER-SPECIAL (81.03X48.41X1.6MM THK)
15.	8D-7424	[1]	SPACER (48X81X6-MM THK)
16.	8T-0336	[1]	FITTING-PRESSURE RELIEF
17.	312-0782	[1]	WORM-CIRCLE DRIVE
18.	9D-1491	[1]	COUPLING
19.	105-3196 Y	[1]	MOTOR GP-GEROTOR (CIRCLE DRIVE)
20.	253-4678	[1]	HOUSING AS-DRIVE
	2D-8154	[4]	STUD-TAPERLOCK (1/2-13X2.36-IN)
	8D-7426	[1]	BUSHING
	160-0011 M	[4]	STUD-TAPERLOCK (M20X2.5X85-MM)
21.	261-8553	[1]	PINION-CIRCLE DRIVE
22.	307-1958	[1]	SHAFT-PINION DRIVE
23.	307-1959 B	[6]	SHIM (0.13-MM THK)(0.2-MM THK)
24.	307-1960 B	[1]	SHIM (0.25-MM THK)(0.3-MM THK)
25.	307-1961	[1]	PLATE
26.	307-1962 B	[4]	SHIM (0.5-MM THK)(0.5-MM THK)
27.	0S-1585	[4]	BOLT (1/2-13X1.5-IN)
28.	1A-1415	[1]	NUT (1-7/8-12-THD)
29.	1B-5174	[1]	PLUG-PIPE
30.	1F-7958	[4]	NUT-FULL (1/2-13-THD)
31.	1H-7339	[1]	SEAL-O-RING
32.	2B-7410	[1]	PLUG-PIPE (OIL DRAIN)
33.	2H-9247	[1]	SEAL-O-RING
34.	4F-9653	[1]	SEAL-O-RING
35.	4H-6996	[1]	PIN-SPRING
36.	5H-4909	[1]	SEAL-O-RING
37.	5K-8454	[3]	BOLT (1/2-13X1.12-IN)
38.	5P-8245	[16]	WASHER-HARD (13.5X25.5X3-MM THK)
39.	5S-7379	[4]	BOLT (3/8-16X0.875-IN)
40.	6G-5539	[1]	GASKET
41.	6G-5548	[1]	SPACER (69.5X89X0.8-MM THK)
42.	6H-1717	[5]	BOLT (1/2-13X1.125-IN)
43.	6V-5686 M	[3]	BOLT (M16X2X50-MM)
44.	8D-5054	[3]	WASHER-HARD (17X30X3-MM THK)
45.	8D-7425	[2]	WASHER-THRUST (2.81X4.25X0.12-IN THK)
46.	8T-4896	[4]	WASHER-HARD (10.2X18.5X2.5-MM THK)
	B		USE AS REQUIRED
	M		METRIC PART
	R		REMANUFACTURED PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

#SEBP50310912

253-4677: DRIVE GP-CIRCLE

DRIVE GP-CIRCLE

253-4677 DRIVE GP-CIRCLE
S/N B9T154-UP
PART OF 321-2933, 349-2554 COMMON AR

i04035909 SEBP5031

For full view, you need register

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1B-4038	[2]	CUP-BEARING
2.	1B-4046	[2]	CONE-BEARING
3.	2G-0478	[5]	PLATE-CLUTCH
4.	2G-6695	[1]	BRACKET
5.	5K-5288	[1]	SEAL GP-DUO-CONE
	5K-5129	[2]	RING-SEALING
6.	323-8674 C	[1]	GEAR-WORM (36-TEETH)
7.	6G-5534	[1]	COVER AS
	6G-5537	[1]	BEARING
8.	6G-5538	[1]	COVER
9.	6G-5542	[2]	SPACER (119.2X178X9.3-MM THK)
10.	6G-6122	[1]	SPRING-DISC
11.	6Y-7953	[6]	DISC-FRICTION
12.	7D-8983 B	[10]	SHIM (0.005-IN THK)
13.	7D-8984 B	[6]	SHIM (0.007-IN THK)
14.	8D-7423	[1]	WASHER-SPECIAL (81.03X48.41X1.6MM THK)
15.	8D-7424	[1]	SPACER (48X81X6-MM THK)
16.	8T-0336	[1]	FITTING-PRESSURE RELIEF
17.	323-8675 C	[1]	WORM-CIRCLE DRIVE
18.	9D-1491	[1]	COUPLING
19.	105-3196 Y	[1]	MOTOR GP-GEROTOR (CIRCLE DRIVE)
20.	253-4678	[1]	HOUSING AS-DRIVE
	2D-8154	[4]	STUD-TAPERLOCK (1/2-13X2.36-IN)
	8D-7426	[1]	BUSHING
	286-2631 M	[4]	STUD-TAPERLOCK (M20X2.5X85-MM)
21.	261-8553	[1]	PINION-CIRCLE DRIVE
22.	307-1958	[1]	SHAFT-PINION DRIVE
23.	307-1959 B	[6]	SHIM (0.13-MM THK)
24.	307-1960 B	[1]	SHIM (0.25-MM THK)
25.	307-1961	[1]	PLATE
26.	307-1962 B	[4]	SHIM (0.5-MM THK)
27.	0S-1585	[4]	BOLT (1/2-13X1.5-IN)
28.	1A-1415	[1]	NUT (1-7/8-12-THD)
29.	1B-5174	[1]	PLUG-PIPE
30.	1F-7958	[4]	NUT-FULL (1/2-13-THD)
31.	1H-7339	[1]	SEAL-O-RING
32.	2B-0858	[1]	PLUG-PIPE (OIL DRAIN)
33.	2H-9247	[1]	SEAL-O-RING
34.	4F-9653	[1]	SEAL-O-RING
35.	4H-6996	[1]	PIN-SPRING
36.	5H-4909	[1]	SEAL-O-RING
37.	5K-8454	[3]	BOLT (1/2-13X1.12-IN)
38.	5P-8245	[16]	WASHER-HARD (13.5X25.5X3-MM THK)
39.	5S-7379	[4]	BOLT (3/8-16X0.875-IN)
40.	6G-5539	[1]	GASKET
41.	6G-5548	[1]	SPACER (69.5X89X0.8-MM THK)
42.	6H-1717	[5]	BOLT (1/2-13X1.125-IN)
43.	6V-5686 M	[3]	BOLT (M16X2X50-MM)
44.	8D-5054	[3]	WASHER-HARD (17X30X3-MM THK)
45.	8D-7425	[2]	WASHER-THRUST (2.81X4.25X0.12-IN THK)
46.	8T-4896	[4]	WASHER-HARD (10.2X18.5X2.5-MM THK)
	B		USE AS REQUIRED
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART
	R		REMANUFACTURED PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

#SEBP50310913

250-3507: FILTER & MTG GP-HYDRAULIC

FILTER & MTG GP-HYDRAULIC

250-3507 FILTER & MTG GP-HYDRAULIC
S/N B9T1-UP
PART OF 231-5061 SERVICE CENTER AR

i02178358 SEBP5031

2503507 FILTER & MTG GP-HYDRAULIC Parts scheme

For full view, you need register

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	148-8407	[1]	PLUG AS
	9S-4191	[1]	PLUG (9/16-18-THD)
	3J-1907	[1]	SEAL-O-RING
3.	242-0407	[1]	VALVE AS-DRAIN (HYDRAULIC FILTER)
4.	245-7603	[1]	TUBE AS
5.	245-8964	[1]	BLOCK
6.	249-2307 Y	[1]	FILTER GP-OIL (HYDRAULIC TANK RETURN)
7.	257-8897	[1]	HOSE-MOLDED
8.		[2]	PLUG AS
			(EACH INCLUDES)
	9S-4183	[1]	PLUG (1-1/16-12-THD)
	3D-2824	[1]	SEAL-O-RING
9.	156-4283	[1]	CONNECTOR AS
	8T-7926	[1]	CONNECTOR
	6K-6307	[1]	SEAL-O-RING
	8T-0315	[1]	SEAL-O-RING
10.	294-9701	[1]	TUBE AS
11.	294-9702	[1]	TUBE AS
12.	4J-0524	[2]	SEAL-O-RING
13.	7X-2543 M	[2]	BOLT (M10X1.5X120-MM)
14.	8T-4121	[8]	WASHER-HARD (11X21X2.5-MM THK)
15.	8T-4133 M	[2]	NUT (M10X1.5-THD)
16.	8T-4183 M	[8]	BOLT (M12X1.75X40-MM)
17.	8T-4195 M	[4]	BOLT (M10X1.5X30-MM)
18.	8T-4223	[8]	WASHER-HARD (13.5X25.5X3-MM THK)
19.	8T-6703	[4]	CLAMP-HOSE
20.	8X-5489	[1]	SLEEVE
21.	122-6908 G		HOSE-HYDRAULIC (6.3-IN)
22.	9X-2023 E		HOSE (31-CM)
	E		ORDER BY THE CENTIMETER
	G		ORDER BY THE INCH
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP50310914

191-9784: FILTER GP-OIL

FILTER GP-OIL

191-9784 FILTER GP-OIL
S/N B9T1-UP
PART OF 237-6423, 355-0117, 473-0556 LINES GP-PUMP
ALSO AN ATTACHMENT

i01441603 SEBP5031

For full view, you need register

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1G-8878	[1]	FILTER-OIL (ADVANCED EFFICIENCY)(HYDRAULIC)
2.	7X-8549	[1]	SWITCH AS-PRESSURE (FILTER BYPASS)
	3J-1907	[1]	SEAL-O-RING
3.	8C-3451	[1]	CAP-DUST (HYDRAULIC OIL)
4.	183-7264	[1]	VALVE AS-FLUID SAMPLING (FILTER OIL)
4A.	3J-1907		SEAL-O-RING

#SEBP50310915

249-2307: FILTER GP-OIL

FILTER GP-OIL

249-2307 FILTER GP-OIL
S/N B9T1-UP
INTERNAL BYPASS
PART OF 250-3507 FILTER & MTG GP-HYDRAULIC

i02909000 SEBP5031

For full view, you need register

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	338-3540	[1]	FILTER ELEMENT-OIL (ULTRA HIGH EFFICIENCY)(HYDRAULIC TANK)
2.	321-5967 C	[1]	HOUSING GP-FILTER (OIL)
	9S-8004	[1]	PLUG (9/16-18-THD)
	214-7568	[1]	SEAL-O-RING
3.	249-2308 Y	[1]	BASE GP-OIL FILTER (HYDRAULIC TANK RETURN)
4.	214-7568	[1]	SEAL-O-RING
5.	6V-5048	[1]	SEAL-O-RING
6.	9S-4185	[1]	PLUG (3/4-16-THD)
7.	9S-4191	[1]	PLUG (9/16-18-THD)
8.	130-0229	[1]	SEAL-O-RING

	8L-2786 F	[1]	SEAL-O-RING
	C		CHANGE FROM PREVIOUS TYPE
	F		NOT SHOWN
	Y		SEPARATE ILLUSTRATION

#SEBP50310916

248-0443: HYDRAULIC AR

HYDRAULIC AR

248-0443 HYDRAULIC AR -ALL WHEEL DRIVE
S/N B9T1-UP
BIODEGRADABLE HYDRAULIC OIL
AN ATTACHMENT

i02235877 SEBP5031

For full view, you need register

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name	Comments
	141-6968	[1]	FILM-IDENTIFICATION (BIODEGRADABLE HYDRAULIC OIL)
			ATTACH FILM NEAR IMPLEMENT OIL FILL

#SEBP50310917

275-5890: LINES & MTG GP-SNOW WING

LINES & MTG GP-SNOW WING

275-5890 LINES & MTG GP-SNOW WING
S/N B9T1-UP
PART OF 275-5904 BLADE & MTG GP-SNOW
AN ATTACHMENT

i03343853 SEBP5031

2755890 LINES & MTG GP-SNOW WING Parts scheme

For full view, you need register

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	4B-5327	[1]	WASHER (41.2X76.2X4-MM THK)
2.	8W-4516 I	[3]	HOSE AS
3.	104-8625 I	[2]	HOSE AS
4.	212-4650 I	[1]	HOSE AS
5.	239-6232 I	[1]	HOSE AS
6.	277-5547	[1]	KIT-HARDWARE (FRONT)
	7X-2489 M	[14]	BOLT (M24X3X100-MM)
	114-6099 M	[6]	BOLT (M24X3X80-MM)
	198-4782	[14]	WASHER-HARD (26X47X12-MM THK)
	267-3506	[12]	WASHER-HARD (26X44X4-MM THK)
	268-8262 M	[6]	NUT (M24X3-THD)
7.	277-5548	[1]	BULKHEAD AS
8.	277-5552	[1]	KIT-HARDWARE (REAR)
	7X-2563 M	[6]	BOLT (M20X2.5X60-MM)
	8T-4131 M	[6]	NUT (M20X2.5-THD)
	9X-2615 M	[6]	BOLT (M24X3X60-MM)
	106-4175 M	[8]	BOLT (M20X2.5X60-MM)
	267-3506	[6]	WASHER-HARD (26X44X4-MM THK)
	267-3508	[20]	WASHER-HARD (22X35X3.5-MM THK)
9.	298-3387	[1]	BRACE AS (LOWER)
	338-1405 B	[16]	SHIM (1-MM THK)
	338-1406 B	[2]	SHIM (0.5-MM THK)
	329-1389 M	[1]	NUT (M30X3.5-THD)
10.	298-3390	[1]	BRACE AS (UPPER)
	338-1405 B	[16]	SHIM (1-MM THK)
	338-1406 B	[2]	SHIM (0.5-MM THK)
	329-1389 M	[1]	NUT (M30X3.5-THD)
11.	331-9951	[1]	BOLT (1-1/2-12X9.5-IN)
12.	299-3401	[1]	NUT-HEX SLOTTED (1-1/2-12-THD)
13.	3B-4647	[1]	PIN-COTTER
14.	3J-1907	[4]	SEAL-O-RING
15.	3K-0360	[4]	SEAL-O-RING
16.	5P-1076	[3]	WASHER-HARD (13.5X30X4-MM THK)
17.	6V-7676 M	[4]	NUT (M24X3-THD)
18.	6V-8397	[13]	SEAL-O-RING
19.	6V-8398	[3]	SEAL-O-RING
20.	6V-8634	[3]	CONNECTOR
21.	6V-8636	[3]	CONNECTOR
22.	6V-8639	[1]	CONNECTOR
23.	6V-8724	[1]	ELBOW
24.	6V-8980	[3]	ELBOW
25.	6V-8981	[1]	ELBOW
26.	6V-9168	[3]	NUT (11/16-16-THD)
27.	6V-9169	[1]	NUT (13/16-16-THD)
28.	7X-2577 M	[4]	BOLT (M24X3X90-MM)
29.	8T-4167	[8]	WASHER-HARD (26X44X4-MM THK)
30.	8T-4956 M	[3]	BOLT (M12X1.75X35-MM)
	B		USE AS REQUIRED
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	M		METRIC PART

#SEBP50310918

275-5891: LINES & MTG GP-SNOW WING

LINES & MTG GP-SNOW WING

275-5891 LINES & MTG GP-SNOW WING
S/N B9T1-UP
PART OF 275-5908 BLADE & MTG GP-SNOW
AN ATTACHMENT

i03343583 SEBP5031

2755891 LINES & MTG GP-SNOW WING Parts scheme

For full view, you need register

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	4B-5327	[1]	WASHER (41.2X76.2X4-MM THK)
2.	8W-4516 I	[3]	HOSE AS
3.	104-8625 I	[2]	HOSE AS
4.	212-4650 I	[1]	HOSE AS
5.	239-6232 I	[1]	HOSE AS
8.	277-5548	[1]	BULKHEAD AS
9.	298-3387	[1]	BRACE AS (LOWER)
	338-1405 B	[16]	SHIM (1-MM THK)
	338-1406 B	[2]	SHIM (0.5-MM THK)
	298-5738	[1]	TUBE AS
	298-5739	[1]	TUBE AS
	329-1389 M	[1]	NUT (M30X3.5-THD)
10.	298-3390	[1]	BRACE AS (UPPER)
	338-1405 B	[16]	SHIM (1-MM THK)
	338-1406 B	[2]	SHIM (0.5-MM THK)
	298-5738	[1]	TUBE AS
		[1]	TUBE AS
	329-1389 M	[1]	NUT (M30X3.5-THD)
11.	331-9951	[1]	BOLT (1-1/2-12X9.5-IN)
12.	299-3401	[1]	NUT-HEX SLOTTED (1-1/2-12-THD)
13.	3B-4647	[1]	PIN-COTTER
14.	3J-1907	[4]	SEAL-O-RING
15.	3K-0360	[4]	SEAL-O-RING
16.	5P-1076	[3]	WASHER-HARD (13.5X30X4-MM THK)
17.	6V-7676 M	[4]	NUT (M24X3-THD)
18.	6V-8397	[13]	SEAL-O-RING
19.	6V-8398	[3]	SEAL-O-RING
20.	6V-8634	[3]	CONNECTOR
21.	6V-8636	[3]	CONNECTOR
22.	6V-8639	[1]	CONNECTOR
23.	6V-8724	[1]	ELBOW
24.	6V-8980	[3]	ELBOW
25.	6V-8981	[1]	ELBOW
26.	6V-9168	[3]	NUT (11/16-16-THD)
27.	6V-9169	[1]	NUT (13/16-16-THD)
28.	7X-2577 M	[4]	BOLT (M24X3X90-MM)
29.	8T-4167	[8]	WASHER-HARD (26X44X4-MM THK)
30.	8T-4956 M	[3]	BOLT (M12X1.75X35-MM)
	B		USE AS REQUIRED
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	M		METRIC PART

#SEBP50310919

231-1515: LINES GP-CENTERSHIFT LOCK

LINES GP-CENTERSHIFT LOCK

231-1515 LINES GP-CENTERSHIFT LOCK
S/N B9T1-UP
PART OF 321-2933, 349-2554 COMMON AR, 364-1991 OPTION AR-MACHINE
ALSO AN ATTACHMENT

i02235532 SEBP5031

2311515 LINES GP-CENTERSHIFT LOCK Parts scheme

For full view, you need register

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	125-0327 I	[1]	HOSE AS
2.	150-3074	[1]	ORIFICE AS
	110-5266	[1]	ORIFICE (1.6-MM)
	3J-1907	[1]	SEAL-O-RING
	6V-8397	[1]	SEAL-O-RING
3.	205-5596	[2]	SPACER (11X15X35-MM THK)
4.	259-7140 M	[2]	STUD-TAPERLOCK (M10X1.5X80-MM)
5.	266-9737 I	[1]	HOSE AS
6.	096-4883 M	[2]	LOCKNUT (M10X1.5-THD)
7.	112-9442 I	[1]	HOSE AS
8.	148-8336	[2]	CONNECTOR AS
			(EACH INCLUDES)
	6V-8636	[1]	CONNECTOR
	3J-1907	[1]	SEAL-O-RING
	6V-8397	[1]	SEAL-O-RING
9.	148-8367	[1]	ELBOW AS (45-DEG)
	6V-9850	[1]	ELBOW
	6V-8397	[1]	SEAL-O-RING
10.	148-8378	[1]	ELBOW AS (90-DEG)
	6V-8724	[1]	ELBOW (90-DEG)
	3J-1907	[1]	SEAL-O-RING
	6V-8397	[1]	SEAL-O-RING
11.	1S-0994	[1]	CLIP (LOOP)
12.	4D-7735	[2]	CLIP
13.	8T-4121	[3]	WASHER-HARD (11X21X2.5-MM THK)
14.	8T-4136 M	[1]	BOLT (M10X1.5X25-MM)
15.	132-2453	[1]	UNION
16.	6E-4701 Y	[1]	VALVE GP-CHECK
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

Information:

HYDRAULIC SYSTEM

CYLINDER GP

Operation and Maintenance Manual

Blade Lift Cylinder Socket - Lubricate
160M Motor Grader

Centershift Cylinder Socket - Lubricate
160M Motor Grader

Ripper Cylinder Bearings - Lubricate
160M Motor Grader

Steering Cylinder Ends and Tie Rods - Lubricate
160M Motor Grader

Wheel Lean Bearings - Lubricate
160M Motor Grader

Blade Lift Cylinder Socket - Check/Adjust/Replace
160M Motor Grader

Centershift Cylinder Socket - Check/Adjust/Replace
160M Motor Grader

Special Instruction

Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}

Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}

Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}

Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}

A Procedure to Calibrate the Steering on Certain Motor Graders{430S, 4313, 4343, 7300, 7451, 7506}
A Procedure to Calibrate the Steering on Certain Motor Graders{430S, 4313, 4343, 7300, 7451, 7506}

Front Axle Steering Cylinder Hose Guard for Certain M Series Motor Graders{7164}
Front Axle Steering Cylinder Hose Guard for Certain M Series Motor Graders{7164}

Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}

Disassembly and Assembly Procedure for 255-8000 Hydraulic Cylinder Gp (Snow Wing){7562}
Disassembly and Assembly Procedure for 255-8000 Hydraulic Cylinder Gp (Snow Wing){7562}

Instructions For Installing Steering Cylinders With Position Sensors On Certain Motor Graders {4303, 7620}
Instructions For Installing Steering Cylinders With Position Sensors On Certain Motor Graders {4303, 7620}

Technical Information Bulletin

Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}

Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}

Drifting May Occur in the Articulation System on Certain M, M Series 2, and M Series 3 Motor Graders {5265}
Drifting May Occur in the Articulation System on Certain M, M Series 2, and M Series 3 Motor Graders {5265}

Specifications

Centershift Cylinder Mounting
120M, 12M, 140M and 160M Motor Graders Machine Systems

Blade Lift Cylinder Mounting
120M, 12M, 140M and 160M Motor Graders Machine Systems

Wheel Lean Cylinder (All Wheel Drive)
120M, 140M and 160M Motor Graders All Wheel Drive

Steering Cylinder (All Wheel Drive)
120M, 140M and 160M Motor Graders All Wheel Drive

Articulation Cylinder
12M, 140M and 160M Motor Graders Hydraulic and Steering System

Blade Tip Cylinder
12M, 140M and 160M Motor Graders Hydraulic and Steering System

Centershift Cylinder
12M, 140M and 160M Motor Graders Hydraulic and Steering System

Ripper Lift Cylinder
12M, 140M and 160M Motor Graders Hydraulic and Steering System

Sideshift Cylinder
12M, 140M and 160M Motor Graders Hydraulic and Steering System

Wheel Lean Cylinder
12M, 140M and 160M Motor Graders Hydraulic and Steering System

Articulation Cylinder Mounting
120M, 12M, 140M and 160M Motor Graders Machine Systems

Steering Cylinder and Mounting
120M, 140M and 160M Motor Graders All Wheel Drive

Steering Cylinder (All Wheel Drive)
12M, 140M and 160M Motor Graders Hydraulic and Steering System

Blade Lift Cylinder
12M, 140M and 160M Motor Graders Hydraulic and Steering System

Tool Operating Manual

Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}

1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}

Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}

4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}

Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}

Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}

Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}

Reuse And Salvage Guidelines

Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}

Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}

Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}

Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}

Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}

Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}

Manual Length Measurement and Calibration of Position Sensors for Steering Cylinders {0738, 0759, 4303}
Manual Length Measurement and Calibration of Position Sensors for Steering Cylinders {0738, 0759, 4303}

Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}

Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}

HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}

Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}

Contamination Control Guidelines

Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}

Applied Failure Analysis

Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}

Testing and Adjusting

Hydraulic Cylinder Drift - Check
12M, 140M and 160M Motor Graders Hydraulic and Steering System

Cylinder Cycle Time - Check
12M, 140M and 160M Motor Graders Hydraulic and Steering System

Steering System - Purge
12M, 140M and 160M Motor Graders Hydraulic and Steering System

Bench Test Procedures

Troubleshooting

MID 082 - CID 2200 - FMI 00
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System

MID 082 - CID 2200 - FMI 03
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System

MID 082 - CID 2200 - FMI 04
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System

MID 082 - CID 2200 - FMI 08
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System

MID 082 - CID 2200 - FMI 13
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System

MID 082 - CID 2201 - FMI 02
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System

MID 082 - CID 2200 - FMI 02
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System

MID 082 - CID 2201 - FMI 03
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System

MID 082 - CID 2201 - FMI 04
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System

MID 082 - CID 2201 - FMI 08
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System

MID 082 - CID 2201 - FMI 13
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System

MID 082 - CID 2200 - FMI 01
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System

MID 082 - CID 2201 - FMI 00
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System

MID 082 - CID 2201 - FMI 01
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System

MID 082 - CID 2200 - FMI 14
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System

MID 082 - CID 2201 - FMI 14
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System

MID 027 - CID 2200 - FMI 00
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

MID 027 - CID 2200 - FMI 01
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

MID 027 - CID 2200 - FMI 02
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

MID 027 - CID 2200 - FMI 03
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

MID 027 - CID 2200 - FMI 04
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

MID 027 - CID 2200 - FMI 08
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

MID 027 - CID 2200 - FMI 13
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

MID 027 - CID 2200 - FMI 14
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

MID 027 - CID 2201 - FMI 00
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

MID 027 - CID 2201 - FMI 01
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

MID 027 - CID 2201 - FMI 02
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

MID 027 - CID 2201 - FMI 03
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

MID 027 - CID 2201 - FMI 04
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

MID 027 - CID 2201 - FMI 08
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

MID 027 - CID 2201 - FMI 13
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

MID 027 - CID 2201 - FMI 14
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System

Disassembly and Assembly

Centershift Cylinder - Remove and Install
160M Motor Grader Machine Systems

Sideshift Cylinder - Remove and Install
160M Motor Grader Machine Systems

Blade Tip Cylinder - Remove and Install
160M Motor Grader Machine Systems

Articulation Cylinder - Remove and Install - Right Side
160M Motor Grader Machine Systems

Ripper Lift Cylinder - Remove and Install
160M Motor Grader Machine Systems

Articulation Cylinder - Remove and Install - Left Side
160M Motor Grader Machine Systems

Steering Cylinder - Remove and Install
160M Motor Grader Machine Systems

Wheel Lean Cylinder - Remove and Install
160M Motor Grader Machine Systems

Blade Lift Cylinder - Remove and Install
160M Motor Grader Machine Systems

Steering Cylinder - Remove and Install
160M Motor Grader Machine Systems

Service Magazine

Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2012/10/04

Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}

Blade Lift Modulation that is Selectable is Available {5063, 5102, 7300, 7451, 7610, 7620}
2009/09/07

New Parts Update the Seal Kit for the Centershift Cylinders and the Lift Cylinders on Certain Motor Graders {5102, 5223}
2009/11/18

A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30

New U-Cup Seal are Available with a Narrow Width to Service Cylinders in the Field {4303, 5101, 5102, 5104, 5456, 5457, 5458, 7562}
2010/12/24

Optional Guards are Now Available for Certain M Series and M Series 2 Motor Graders {7164}
2011/11/07

An Updated Procedure is Available for the Blade Tip Cylinder on Certain 120H, 120M, 12H, 12M, 140H, 140M, 143H, 14H, 160H, 160M, 163H, and 16H Motor Graders {5106, 7562}
2011/08/09

New Shear Pin for Circle Group Is Now Available for Certain Motor Graders Used in Snow Removal Applications {5106}
2014/12/09

The Assembly Procedure For The Blade Lift Cylinder Has Been Improved On Certain Motor Graders {5102}
2015/02/27

New Steering Cylinders With Position Sensors are Now Available on Certain Motor Graders {4303, 7620}
New Steering Cylinders With Position Sensors are Now Available on Certain Motor Graders {4303, 7620}

Cat® Reman Announces Remanufactured Cylinders For Motor Grader Applications {4303, 5102, 5106, 5211, 5213, 5223, 5229, 5265}
2015/06/05

Improved Blade Lift Cylinder Yoke Bolts Are Now Used On Certain K and M Series Motor Graders {5102}
Improved Blade Lift Cylinder Yoke Bolts Are Now Used On Certain K and M Series Motor Graders {5102}

Caterpillar Parts SIS Catalog 160M :

262-5766 CYLINDER GP-STEERING

509-6993 CYLINDER GP-SIDESHIFT

249-4116 CYLINDER GP-SIDESHIFT

165-2510 CYLINDER GP-SCARIFIER

326-2227 CYLINDER GP-RIPPER

113-7754 CYLINDER GP-RIPPER

335-1974 CYLINDER GP-LIFT

262-1900 CYLINDER GP-LIFT

253-4677 DRIVE GP-CIRCLE

250-3507 FILTER & MTG GP-HYDRAULIC

191-9784 FILTER GP-OIL

249-2307 FILTER GP-OIL

248-0443 HYDRAULIC AR

275-5890 LINES & MTG GP-SNOW WING

275-5891 LINES & MTG GP-SNOW WING

Truck sale:

207,000

Caterpillar 160M2, Construction
- motor graders
N C MACHINERY CO.

173,900

Caterpillar 160M2, Construction
- motor graders
N C MACHINERY CO.

209,900

Caterpillar 160M2, Construction
- motor graders
N C MACHINERY CO.

204,900

Caterpillar 160M2, Construction
- motor graders
N C MACHINERY CO.

217,000

Caterpillar 160M2, Construction
- motor graders
TRACTOR & EQUIPMENT CO.