ELECTRICAL AND STARTING SYSTEM
STARTING AID GPSTARTING MOTOR GP
ELECTRICAL AND STARTING SYSTEM
STARTING AID GP
#SEBP50320430
238-3215: STARTING AID GP
238-3215 STARTING AID GP -AIR INLET HEATER
S/N TXD1-UP; THX24791-UP
24-VOLT, 2000-WATT
PART OF 225-5619, 387-8570, 387-8578, 457-9755, 506-2266 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
S/N TXD1-UP; THX24791-UP
24-VOLT, 2000-WATT
PART OF 225-5619, 387-8570, 387-8578, 457-9755, 506-2266 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
For full view, you need register
Parts for your 160M MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 324-3257 C | [1] | HEATER AS-AIR INLET (24-VOLT, 1892-WATT)(STARTING AID) | |
| 2. | 344-9225 C | [1] | STRAP-GROUNDING | |
| 3. | 3E-4352 C | [1] | WASHER-HARD (8.8X20.5X2.5-MM THK) | |
| 4. | 5C-2890 CM | [1] | NUT (M6X1-THD) | |
| 5. | 6V-5217 CM | [1] | BOLT (M8X1.25X20-MM) | |
| 6. | 9X-8256 C | [1] | WASHER (6.6X12X2-MM THK) | |
| 7. | 1U-8846 B | SEALANT-GASKET | ||
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
#SEBP50320431
238-9561: STARTING AID GP-ETHER
238-9561 STARTING AID GP-ETHER
S/N D9T1-UP
PART OF 349-3071, 349-8290 OPTION AR-COLD WEATHER, 242-9549 SNOW AR-MOTOR GRADER
AN ATTACHMENT
S/N D9T1-UP
PART OF 349-3071, 349-8290 OPTION AR-COLD WEATHER, 242-9549 SNOW AR-MOTOR GRADER
AN ATTACHMENT
For full view, you need register
Parts for your 160M MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3P-0764 | [1] | PLUG | |
| 2. | 7N-2059 | [1] | CLAMP AS (CYLINDER) | |
| 3. | 239-1134 Y | [1] | VALVE GP-ETHER STARTING (24-VOLT) | |
| 4. | 241-4194 | [1] | FITTING AS (CONTROL) | |
| 236-4545 | [1] | NUT-SLEEVE (5/16-24-THD) | ||
| 5. | 250-2177 | [1] | ATOMIZER AS | |
| 6. | 6V-2686 | [1] | CLIP | |
| 7. | 6V-4589 | [1] | SEAL-O-RING | |
| 8. | 8T-4189 CM | [2] | BOLT (M8X1.25X20-MM) | |
| 9. | 8T-4224 C | [2] | WASHER-HARD (8.8X16X2-MM THK) | |
| 10. | 5P-5630 CD | TUBE (0.8-M) | ||
| 11. | 8T-4121 | [1] | WASHER-HARD (11X21X2.5-MM THK) | |
| 12. | 8T-4137 M | [1] | BOLT (M10X1.5X20-MM) | |
| 7N-0296 A | [1] | CYLINDER AS-ETHER | ||
| (MUST BE PROCURED LOCALLY FROM YOUR CATERPILLAR DEALER) | ||||
| A | NOT PART OF THIS GROUP | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| D | ORDER BY THE METER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP50320432
238-9561: STARTING AID GP-ETHER
238-9561 STARTING AID GP-ETHER
S/N D9T1564-UP
PART OF 349-8290 OPTION AR-COLD WEATHER
AN ATTACHMENT
S/N D9T1564-UP
PART OF 349-8290 OPTION AR-COLD WEATHER
AN ATTACHMENT
For full view, you need register
Parts for your 160M MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3P-0764 | [1] | PLUG | |
| 2. | 7N-2059 | [1] | CLAMP AS (CYLINDER) | |
| 3. | 239-1134 Y | [1] | VALVE GP-ETHER STARTING (24-VOLT) | |
| 4. | 241-4194 | [1] | FITTING AS (CONTROL) | |
| 236-4545 | [1] | NUT-SLEEVE (5/16-24-THD) | ||
| 5. | 250-2177 | [1] | ATOMIZER AS | |
| 6. | 3S-2093 C | [1] | STRAP-CABLE | |
| 7. | 136-7227 | [1] | SEAL-O-RING | |
| 8. | 8T-4189 M | [2] | BOLT (M8X1.25X20-MM) | |
| 9. | 8T-4224 | [2] | WASHER-HARD (8.8X16X2-MM THK) | |
| 10. | 5P-5630 CD | TUBE (0.9-M) | ||
| 7N-0296 A | [1] | CYLINDER AS-ETHER | ||
| (MUST BE PROCURED LOCALLY FROM YOUR CATERPILLAR DEALER) | ||||
| A | NOT PART OF THIS GROUP | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| D | ORDER BY THE METER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP50320433
207-1556: STARTING MOTOR GP-ELECTRIC
207-1556 STARTING MOTOR GP-ELECTRIC
S/N D9T1-UP; THX121-UP
24-VOLT
PART OF 248-0716, 418-9743 STARTING MOTOR GP-ELECTRIC
ALSO AN ATTACHMENT
S/N D9T1-UP; THX121-UP
24-VOLT
PART OF 248-0716, 418-9743 STARTING MOTOR GP-ELECTRIC
ALSO AN ATTACHMENT
For full view, you need register
Parts for your 160M MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3T-3434 | [6] | PLUG | |
| 2. | 7T-3279 | [1] | HOUSING AS | |
| 3. | 8T-8566 | [1] | TERMINAL AS | |
| 4. | 6V-8188 | [4] | NUT (1/2-13-THD) | |
| 5. | 7X-0562 | [4] | WASHER-HARD (13.5X19X0.8-MM THK) | |
| 6. | 3T-3422 | [1] | WIRE AS | |
| 7. | 7T-3278 | [1] | HOLDER AS-BRUSH | |
| 8. | 7T-3277 | [1] | COIL AS-FIELD | |
| 9. | 7T-3454 | [1] | INSULATOR | |
| 10. | 283-1107 | [1] | KIT-CONNECTOR (STARTING MOTOR) | |
| (INCLUDES CONNECTORS, BOLT & TERMINAL-STARTER) | ||||
| 11. | 7T-3451 | [1] | KIT-INSULATOR (STARTING MOTOR) | |
| 12. | 8T-8569 | [1] | INSULATOR-TERMINAL | |
| 13. | 5S-7349 | [4] | BOLT (1/4-20X0.5-IN) | |
| 14. | 8T-4205 | [4] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 15. | 8H-1141 | [4] | SHOE-POLE | |
| 16. | 3R-8797 | [8] | SCREW & WASHER AS (3/8-24X0.72-IN) | |
| 17. | 7T-3276 | [1] | ARMATURE AS (24-VOLT) | |
| 18. | 3E-7775 | [1] | HOUSING AS | |
| 19. | 4M-1831 | [1] | PLUG-LEVER HOUSING | |
| 20. | 7L-2894 | [1] | GASKET | |
| 21. | 0S-1597 | [5] | BOLT (1/4-28X1-IN) | |
| 22. | 6N-3826 | [1] | DRIVE AS-MOTOR | |
| 23. | 7T-3974 | [1] | HOUSING AS-DRIVE | |
| 24. | 7X-3373 | [6] | BOLT (5/16-18X0.88-IN) | |
| 25. | 548-9596 | [1] | KIT-SOLENOID (24-VOLT)(INSULATED) | |
| (INCLUDES BOLT, NUTS & CONNECTORS) | ||||
| 26. | 6V-8378 | [3] | NUT (10-32-THD) | |
| 27. | 8F-1434 | [2] | LOCKWASHER | |
| 28. | 8T-0328 | [3] | WASHER-HARD (5.5X10X1-MM THK) | |
| 29. | 9X-4824 | [1] | COVER-STARTING MOTOR | |
| 30. | 8T-9884 | [1] | KIT-INSULATOR (STARTING MOTOR) | |
| (INCLUDES INSULATORS & BUSHING) | ||||
| 31. | 8C-3655 | [1] | KIT-BRUSH (STARTING MOTOR) | |
| (INCLUDES BRUSHES, SPRINGS, SCREWS, SCREW ASSEMBLIES & SEAL) | ||||
| 32. | 7T-3268 | [1] | KIT-LEVER (STARTING MOTOR) | |
| (INCLUDES LEVER ASSEMBLIES, SEAL, NUT, GASKET & RETAINER) | ||||
| AVAILABLE REPAIR KIT(S): | ||||
| 7T-3267 | [1] | KIT-BUSHING (STARTING MOTOR) | ||
| (INCLUDES BUSHINGS, WICKS, CUPS, SEALS, GASKET, SCREW AS, WASHERS, SPACER & NUT) | ||||
#SEBP50320434
248-0716: STARTING MOTOR GP-ELECTRIC
248-0716 STARTING MOTOR GP-ELECTRIC
S/N THX121-UP
PART OF 225-5619 ENGINE AR-COMPLETE
S/N THX121-UP
PART OF 225-5619 ENGINE AR-COMPLETE
For full view, you need register
Parts for your 160M MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4H-7869 | [1] | GASKET | |
| 2. | 8Y-9603 | [1] | CABLE AS-STARTING MOTOR | |
| 1S-7251 | [1] | TERMINAL-CABLE (00-GA, 1/2-IN SCREW) | ||
| 1S-7252 | [1] | TERMINAL-CABLE (00-GA, 3/8-IN SCREW) | ||
| 5P-0747 E | [28] | CABLE (00-GA, BLACK) | ||
| 3. | 207-1556 Y | [1] | STARTING MOTOR GP-ELECTRIC (24-VOLT) | |
| 4. | 220-0771 M | [3] | BOLT-12 POINT HEAD (M16X2X45-MM) | |
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP50320435
389-5796: STARTING MOTOR GP-ELECTRIC
389-5796 STARTING MOTOR GP-ELECTRIC
S/N D9T312-1520
24 VOLT
PART OF 416-9123 STARTING MOTOR GP-ELECTRIC
FIELD REPLACEMENT ORDER @@@@@436-9102@@@@@
S/N D9T312-1520
24 VOLT
PART OF 416-9123 STARTING MOTOR GP-ELECTRIC
FIELD REPLACEMENT ORDER @@@@@436-9102@@@@@
For full view, you need register
#SEBP50320436
416-9123: STARTING MOTOR GP-ELECTRIC
416-9123 STARTING MOTOR GP-ELECTRIC
S/N D9T312-1520
PART OF 349-2554 COMMON AR
S/N D9T312-1520
PART OF 349-2554 COMMON AR
For full view, you need register
Parts for your 160M MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8Y-9603 | [1] | CABLE AS-STARTING MOTOR | |
| 1S-7251 | [1] | TERMINAL-CABLE (00-GA, 1/2-IN SCREW) | ||
| 1S-7252 | [1] | TERMINAL-CABLE (00-GA, 3/8-IN SCREW) | ||
| 159-8050 E | CABLE (00-GA, BLACK)(28-CM) | |||
| 2. | 389-5796 Y | [1] | STARTING MOTOR GP-ELECTRIC (24-VOLT) | |
| 3. | 220-0771 M | [3] | BOLT-12 POINT HEAD (M16X2X45-MM) | |
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP50320437
416-9123: STARTING MOTOR GP-ELECTRIC
416-9123 STARTING MOTOR GP-ELECTRIC
S/N D9T1521-UP
PART OF 349-2554 COMMON AR
S/N D9T1521-UP
PART OF 349-2554 COMMON AR
For full view, you need register
Parts for your 160M MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8Y-9603 | [1] | CABLE AS-STARTING MOTOR | |
| 1S-7251 | [1] | TERMINAL-CABLE (00-GA, 1/2-IN SCREW) | ||
| 1S-7252 | [1] | TERMINAL-CABLE (00-GA, 3/8-IN SCREW) | ||
| 159-8050 E | CABLE (00-GA, BLACK)(28-CM) | |||
| 2. | 214-4677 C | [3] | WASHER-HARD (17X27X5-MM THK) | |
| 3. | 296-3446 CM | [3] | BOLT-12 POINT HEAD (M16X2X50-MM) | |
| 4. | 436-9102 CY | [1] | STARTING MOTOR GP-ELECTRIC (24-VOLT) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP50320438
418-9743: STARTING MOTOR GP-ELECTRIC
418-9743 STARTING MOTOR GP-ELECTRIC
S/N D9T1-UP
PART OF 364-3738 OPTION AR-REGIONAL
AN ATTACHMENT
S/N D9T1-UP
PART OF 364-3738 OPTION AR-REGIONAL
AN ATTACHMENT
For full view, you need register
Parts for your 160M MOTOR GRADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4H-7869 | [1] | GASKET | |
| 2. | 8Y-9603 | [1] | CABLE AS-STARTING MOTOR | |
| 1S-7251 | [1] | TERMINAL-CABLE (00-GA, 1/2-IN SCREW) | ||
| 1S-7252 | [1] | TERMINAL-CABLE (00-GA, 3/8-IN SCREW) | ||
| 159-8050 E | CABLE (00-GA, BLACK)(28-CM) | |||
| 3. | 207-1556 Y | [1] | STARTING MOTOR GP-ELECTRIC (24-VOLT) | |
| 4. | 220-0771 M | [3] | BOLT-12 POINT HEAD (M16X2X45-MM) | |
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP50320439
436-9102: STARTING MOTOR GP-ELECTRIC
436-9102 STARTING MOTOR GP-ELECTRIC
S/N D9T1521-UP
24-VOLT
PART OF 416-9123 STARTING MOTOR GP-ELECTRIC
FIELD REPLACEMENT FOR @@@@@389-5796@@@@@
S/N D9T1521-UP
24-VOLT
PART OF 416-9123 STARTING MOTOR GP-ELECTRIC
FIELD REPLACEMENT FOR @@@@@389-5796@@@@@
For full view, you need register
