AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

249-7298 VALVE GP-BANK 3 -REAR S/N D9T1-UP PART OF 242-5056, 242-5058, 242-5059, 242-5061, 242-6108, 242-6110, 309-9848, 349-3055, 354-4113, 422-1612 CONTROL AR-HYDRAULIC AN ATTACHMENT 160M


HYDRAULIC SYSTEM
VALVE GP-BANK

MOTOR GRADER 160M MOTOR GRADER D9T
 160M Motor Grader - All Wheel Drive D9T00001-UP (MACHINE) POWERED BY C9 Engine SEBP5032 160M D9T   (2007)

HYDRAULIC SYSTEM

VALVE GP-BANK
VALVE GP-BANK 1
355-4097 VALVE GP-BANK 1
VALVE GP-BANK 3
249-7298 VALVE GP-BANK 3
VALVE GP-BANK 3
382-4418 VALVE GP-BANK 3
VALVE GP-BANK 3
487-3027 VALVE GP-BANK 3
VALVE GP-BANK 4
248-6169 VALVE GP-BANK 4
 

#SEBP50321010
 

249-7298: VALVE GP-BANK 3

249-7298 VALVE GP-BANK 3 -REAR
S/N D9T1-UP
PART OF 242-5056, 242-5058, 242-5059, 242-5061, 242-6108, 242-6110, 309-9848, 349-3055, 354-4113, 422-1612 CONTROL AR-HYDRAULIC
AN ATTACHMENT
i02780498 SEBP5032
2497298 VALVE GP-BANK 3 Parts scheme
  For full view, you need register

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 372-0918 [4] SEAL-INTEGRAL  
3. 245-9532 Y [1] VALVE GP-CONTROL (ARTICULATION)  
4. 245-9533 Y [1] VALVE GP-CONTROL (BLADE LIFT)(LEFT)  
4A. 245-9533 Y [1] VALVE GP-CONTROL (BLADE LIFT)(RIGHT)  
5. 249-5636 M [4] STUD (M10X1.5X200-MM)  
7. 273-1871 [1] COVER  
8. 292-2034 Y [1] MANIFOLD GP-VALVE (INLET)(FRONT)  
9. 292-9221 [1] PLUG AS  
  292-9220 [1] PLUG  
  294-8055 [1] SEAL-O-RING  
10. 148-8411 [6] PLUG AS  
    (EACH INCLUDES)
  9S-4185 [1] PLUG (3/4-16-THD)  
  3K-0360 [1] SEAL-O-RING  
11. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
12. 8T-4133 M [4] NUT (M10X1.5-THD)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP50321011
 

382-4418: VALVE GP-BANK 3

382-4418 VALVE GP-BANK 3 -REAR
S/N D9T1-UP
PART OF 242-5056, 422-1612, 438-5421, 438-5423 CONTROL AR-HYDRAULIC
AN ATTACHMENT
i05373678 SEBP5032
3824418 VALVE GP-BANK 3 Parts scheme
  For full view, you need register

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 249-5636 M [4] STUD (M10X1.5X200-MM)  
2. 273-1871 [1] COVER  
3. 292-9221 [1] PLUG AS  
  292-9220 [1] PLUG  
  294-8055 [1] SEAL-O-RING  
4. 366-4700 [6] PLUG AS  
    (EACH INCLUDES)
  3K-0360 [1] SEAL-O-RING  
  360-3693 [1] PLUG (3/4-16-THD)  
5. 371-6093 Y [1] VALVE GP-CONTROL (ARTICULATION)  
6. 372-0918 [4] SEAL-INTEGRAL  
7. 380-1747 Y [1] VALVE GP-CONTROL (BLADE LIFT)(LEFT)  
7A. 380-1747 Y [1] VALVE GP-CONTROL (BLADE LIFT)(RIGHT)  
8. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
9. 388-4281 Y [1] MANIFOLD GP-VALVE (INLET)  
10. 8T-4133 M [4] NUT (M10X1.5-THD)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP50321012
 

487-3027: VALVE GP-BANK 3

487-3027 VALVE GP-BANK 3 -REAR
S/N D9T1-UP
PART OF 242-5056, 422-1612, 438-5421, 438-5423 CONTROL AR-HYDRAULIC
AN ATTACHMENT
i07622855 SEBP5032
4873027 VALVE GP-BANK 3 Parts scheme
  For full view, you need register

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2S-4663 [6] SEAL-O-RING  
2. 3K-0360 [3] SEAL-O-RING  
3. 3T-0849 M [12] BOLT-SOCKET HEAD (M6X1X25-MM)  
5. 4J-7533 [3] SEAL-O-RING  
6. 5B-9318 [3] BALL  
7. 6E-3007 [3] SPRING  
8. 8T-0267 M [6] BOLT-SOCKET HEAD (M6X1X12-MM)  
9. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
10. 096-3831 [1] ORIFICE  
11. 106-3659 [1] PISTON  
12. 106-3660 [4] PISTON  
13. 212-4961 [3] SPRING  
14. 242-9264 [3] PLUG-ORIFICE  
15. 243-2965 [3] SPOOL  
16. 244-2579 [3] PLUG  
17. 249-5636 M [4] STUD (M10X1.5X200-MM)  
18. 273-1871 [1] COVER  
19. 278-1799 Y [2] VALVE GP-SOLENOID (BLADE LIFT, RH)  
19A. 278-1799 Y [2] VALVE GP-SOLENOID (BLADE LIFT, LH)  
19B. 278-1799 Y [2] VALVE GP-SOLENOID (ARTICULATION)  
20. 292-9221 [1] PLUG AS  
  292-9220 [1] PLUG  
  294-8055 [1] SEAL-O-RING  
21. 318-3052 H [1] VALVE GP-CHECK & RELIEF (BLADE LIFT, LH)  
21A. 318-3052 H [1] VALVE GP-CHECK & RELIEF (BLADE LIFT, RH)  
22. 318-3115 H [1] VALVE GP-CHECK (BLADE LIFT, RH)  
  6V-6580 H [1] SEAL-O-RING  
  9X-7745 H [1] SEAL-O-RING  
  471-6294 H [1] SEAL-O-RING  
22A. 318-3115 H [1] VALVE GP-CHECK (BLADE LIFT, LH)  
  6V-6580 H [1] SEAL-O-RING  
  9X-7745 H [1] SEAL-O-RING  
  471-6294 H [1] SEAL-O-RING  
23. 321-6908 H [2] VALVE GP-CHECK (ARTICULATION)  
    (EACH INCLUDES)
  6V-6580 H [1] SEAL-O-RING  
  9X-7745 H [1] SEAL-O-RING  
  471-6294 H [1] SEAL-O-RING  
24. 336-6718 [3] LOCKNUT-FLANGE  
25. 344-5675 M [4] NUT (M10X1.5-THD)  
26. 361-3059 L [1] VALVE GP-RELIEF (PILOT OPERATED)  
27. 366-4699 [3] PLUG AS  
    (EACH INCLUDES)
  3J-1907 [1] SEAL-O-RING  
  360-3692 [1] PLUG  
28. 366-4700 [10] PLUG AS  
    (EACH INCLUDES)
  3K-0360 [1] SEAL-O-RING  
  360-3693 [1] PLUG (3/4-16-THD)  
29. 367-6001 [4] PLUG AS  
    (EACH INCLUDES)
  4J-7533 [1] SEAL-O-RING  
  360-3675 [1] PLUG (5/16-24-THD)  
30. 367-6002 [4] PLUG AS  
    (EACH INCLUDES)
  3J-7354 [1] SEAL-O-RING  
  360-3677 [1] PLUG (7/16-20-THD)  
31. 367-6003 [3] PLUG AS  
    (EACH INCLUDES)
  3K-0360 [1] SEAL-O-RING  
  360-3680 [1] PLUG  
32. 370-8976 [3] COVER-SPRING  
33. 370-8979 [3] COVER  
35. 372-0918 [3] SEAL-INTEGRAL  
36. 380-0794 [12] RETAINER  
37. 380-0819 [1] SPRING  
38. 380-0820 [2] SPRING  
39. 380-0821 [2] SPRING  
42. 382-5518 [1] MANIFOLD-INLET  
   
  371-6093 AFJY [1] VALVE GP-CONTROL (ARTICULATION)  
  372-0918 AFJ [3] SEAL-INTEGRAL  
  488-7009 AFJY [1] VALVE GP-CONTROL (BLADE LIFT)  
   
    AVAILABLE REPAIR KIT(S):
  471-4231 H [2] KIT-SEAL (BLADE LIFT)  
    (ALSO INCLUDES BACKUP RINGS)
  133-5545 L [1] KIT-SEAL (PILOT OPERATED)  
    (INCLUDES O-RING SEALS & BACKUP RINGS)
  A   NOT PART OF THIS GROUP
  F   NOT SHOWN
  H   KIT MARKED H SERVICES PART(S) MARKED H
  J   REFER TO "FIELD REPLACEMENT REFERENCE" CHART ON GRAPHIC
  L   KIT MARKED L SERVICES PART(S) MARKED L
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP50321013
 

248-6169: VALVE GP-BANK 4

248-6169 VALVE GP-BANK 4 -REAR
S/N D9T1-UP
PART OF 242-5057, 242-5060, 242-5062, 309-7551, 349-3054, 349-3057, 349-3059, 349-8278, 365-3354, 365-3355, 365-5539, 365-5540 CONTROL AR-HYDRAULIC
AN ATTACHMENT
i02779399 SEBP5032
2486169 VALVE GP-BANK 4 Parts scheme
  For full view, you need register

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
2. 372-0918 [5] SEAL-INTEGRAL  
3. 245-9532 Y [1] VALVE GP-CONTROL (ARTICULATION)  
4. 245-9533 Y [1] VALVE GP-CONTROL (BLADE LIFT)(LEFT)  
4A. 245-9533 Y [1] VALVE GP-CONTROL (BLADE LIFT)(RIGHT)  
5. 245-9541 Y [1] VALVE GP-CONTROL (RIPPER)  
7. 248-6175 [4] ROD  
8. 273-1871 [1] COVER  
9. 292-2034 Y [1] MANIFOLD GP-VALVE (INLET)(FRONT)  
10. 292-9221 [1] PLUG AS  
  292-9220 [1] PLUG  
  294-8055 [1] SEAL-O-RING  
11. 148-8411 [8] PLUG AS  
    (EACH INCLUDES)
  9S-4185 [1] PLUG (3/4-16-THD)  
  3K-0360 [1] SEAL-O-RING  
12. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
13. 8T-4133 M [4] NUT (M10X1.5-THD)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP50321014
 

382-4419: VALVE GP-BANK 4

382-4419 VALVE GP-BANK 4 -REAR
S/N D9T1331-UP
PART OF 365-3354, 365-3355, 365-5539, 365-5540 CONTROL AR-HYDRAULIC
AN ATTACHMENT
i05391170 SEBP5032
3824419 VALVE GP-BANK 4 Parts scheme
  For full view, you need register

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 248-6175 [4] ROD  
2. 273-1871 [1] COVER  
3. 292-9221 [1] PLUG AS  
  292-9220 [1] PLUG  
  294-8055 [1] SEAL-O-RING  
4. 366-4700 [8] PLUG AS  
    (EACH INCLUDES)
  3K-0360 [1] SEAL-O-RING  
  360-3693 [1] PLUG (3/4-16-THD)  
5. 371-6093 Y [1] VALVE GP-CONTROL (ARTICULATION)  
6. 372-0918 [5] SEAL-INTEGRAL  
7. 380-1747 Y [2] VALVE GP-CONTROL (BLADE LIFT)  
8. 382-3295 Y [1] VALVE GP-CONTROL (RIPPER)  
9. 8T-4133 M [4] NUT (M10X1.5-THD)  
10. 388-4281 Y [1] MANIFOLD GP-VALVE (INLET)  
11. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP50321015
 

487-3028: VALVE GP-BANK 4

487-3028 VALVE GP-BANK 4 -REAR
S/N D9T1331-UP
PART OF 365-3354, 365-3355, 365-5539, 365-5540 CONTROL AR-HYDRAULIC
AN ATTACHMENT
i07526162 SEBP5032
4873028 VALVE GP-BANK 4 Parts scheme 4873028 VALVE GP-BANK 4 Parts scheme 4873028 VALVE GP-BANK 4 Parts scheme
  For full view, you need register

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2S-4663 [8] SEAL-O-RING  
2. 3K-0360 [4] SEAL-O-RING  
3. 3T-0849 M [16] BOLT-SOCKET HEAD (M6X1X25-MM)  
5. 4J-7533 [4] SEAL-O-RING  
6. 5B-9318 [4] BALL  
7. 6E-3007 [4] SPRING  
8. 8T-0267 M [8] BOLT-SOCKET HEAD (M6X1X12-MM)  
9. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
10. 096-3831 [1] ORIFICE  
11. 106-3659 [2] PISTON  
12. 106-3660 [4] PISTON  
13. 212-4961 [4] SPRING  
14. 242-9264 [4] PLUG-ORIFICE  
15. 243-2965 [4] SPOOL  
16. 244-2579 [4] PLUG  
17. 273-1871 [1] COVER  
18. 278-1799 Y [2] VALVE GP-SOLENOID (RIPPER)  
18A. 278-1799 Y [2] VALVE GP-SOLENOID (ARTICULATION)  
18B. 278-1799 Y [2] VALVE GP-SOLENOID (BLADE LIFT, LH)  
18C. 278-1799 Y [2] VALVE GP-SOLENOID (BLADE LIFT, RH)  
19. 292-9221 [1] PLUG AS  
  292-9220 [1] PLUG  
  294-8055 [1] SEAL-O-RING  
20. 318-3040 L [1] VALVE GP-CHECK & RELIEF (RIPPER)  
21. 318-3052 L [1] VALVE GP-CHECK & RELIEF (BLADE LIFT, LH)  
21A. 318-3052 L [1] VALVE GP-CHECK & RELIEF (BLADE LIFT, RH)  
22. 318-3115 L [1] VALVE GP-CHECK (BLADE LIFT, RH)  
22A. 318-3115 L [1] VALVE GP-CHECK (BLADE LIFT, LH)  
22B. 318-3115 L [1] VALVE GP-CHECK (RIPPER)  
23. 321-6908 L [2] VALVE GP-CHECK (ARTICULATION)  
    (EACH VALVE GP-CHECK INCLUDES)
  6V-6580 L [1] SEAL-O-RING  
  9X-7745 L [1] SEAL-O-RING  
  471-6294 L [1] SEAL-O-RING  
24. 336-6718 [4] LOCKNUT-FLANGE  
25. 344-5675 M [4] NUT (M10X1.5-THD)  
26. 361-3059 H [1] VALVE GP-RELIEF (LOAD SENSING)  
27. 366-4699 [3] PLUG AS  
    (EACH INCLUDES)
  3J-1907 [1] SEAL-O-RING  
  360-3692 [1] PLUG  
28. 366-4700 [12] PLUG AS  
    (EACH INCLUDES)
  3K-0360 [1] SEAL-O-RING  
  360-3693 [1] PLUG (3/4-16-THD)  
29. 367-6001 [4] PLUG AS  
    (EACH INCLUDES)
  4J-7533 [1] SEAL-O-RING  
  360-3675 [1] PLUG (5/16-24-THD)  
30. 367-6002 [5] PLUG AS  
    (EACH INCLUDES)
  3J-7354 [1] SEAL-O-RING  
  360-3677 [1] PLUG (7/16-20-THD)  
31. 367-6003 [4] PLUG AS  
    (EACH INCLUDES)
  3K-0360 [1] SEAL-O-RING  
  360-3680 [1] PLUG  
32. 564-6716 [4] COVER-SPRING  
33. 370-8979 [4] COVER  
34. 372-0918 [3] SEAL-INTEGRAL  
35. 380-0794 [16] RETAINER  
36. 526-6377 [2] SPRING  
37. 380-0820 [2] SPRING  
38. 380-0821 [2] SPRING  
41. 382-5518 [1] MANIFOLD-INLET  
44. 248-6175 [4] ROD  
   
  371-6093 AFJY [1] VALVE GP-CONTROL (ARTICULATION)  
  372-0918 AFJ [4] SEAL-INTEGRAL  
  382-3295 AFJY [1] VALVE GP-CONTROL (RIPPER)  
  488-7009 AFJY [1] VALVE GP-CONTROL (BLADE LIFT)  
   
    AVAILABLE REPAIR KIT(S):
  133-5545 H [1] KIT-SEAL (LOAD SENSING)  
    (INCLUDES O-RING SEALS & BACKUP RINGS)
  471-4231 L [1] KIT-SEAL (ARTICULATION)  
    (ALSO INCLUDES BACKUP RINGS)
  A   NOT PART OF THIS GROUP
  F   NOT SHOWN
  H   KIT MARKED H SERVICES PART(S) MARKED H
  J   REFER TO "FIELD REPLACEMENT REFERENCE" CHART ON GRAPHIC
  L   KIT MARKED L SERVICES PART(S) MARKED L
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP50321016
 

248-6168: VALVE GP-BANK 5

248-6168 VALVE GP-BANK 5 -FRONT FRAME
S/N D9T1-UP
PART OF 242-5056, 242-5057, 242-6109, 349-3054, 365-5539, 422-1612 CONTROL AR-HYDRAULIC
AN ATTACHMENT
i02779294 SEBP5032
2486168 VALVE GP-BANK 5 Parts scheme
  For full view, you need register

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
2. 372-0918 [6] SEAL-INTEGRAL  
3. 245-9534 Y [1] VALVE GP-CONTROL (BLADE TIP)  
4. 245-9535 Y [1] VALVE GP-CONTROL (BLADE CENTERSHIFT)  
5. 245-9536 Y [1] VALVE GP-CONTROL (BLADE SIDESHIFT)  
6. 245-9537 Y [1] VALVE GP-CONTROL (CIRCLE DRIVE)  
7. 245-9539 Y [1] VALVE GP-CONTROL (WHEEL LEAN)  
9. 248-6174 [4] ROD  
10. 273-1871 [1] COVER  
11. 292-2033 Y [1] MANIFOLD GP-VALVE (INLET)(FRONT)  
12. 292-9221 [1] PLUG AS  
  292-9220 [1] PLUG  
  294-8055 [1] SEAL-O-RING  
13. 148-8411 [10] PLUG AS  
    (EACH INCLUDES)
  9S-4185 [1] PLUG (3/4-16-THD)  
  3K-0360 [1] SEAL-O-RING  
14. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
15. 8T-4133 M [4] NUT (M10X1.5-THD)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP50321017
 

249-7299: VALVE GP-BANK 5

249-7299 VALVE GP-BANK 5 -REAR
S/N D9T1-UP
PART OF 242-5063, 242-5064, 242-6111, 242-6146, 309-9859, 309-9873, 349-3058, 349-8279 CONTROL AR-HYDRAULIC
AN ATTACHMENT
i02780719 SEBP5032
2497299 VALVE GP-BANK 5 Parts scheme
  For full view, you need register

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
2. 372-0918 [6] SEAL-INTEGRAL  
3. 245-9532 Y [1] VALVE GP-CONTROL (ARTICULATION)  
4. 245-9533 Y [1] VALVE GP-CONTROL (BLADE LIFT)(LEFT)  
4A. 245-9533 Y [1] VALVE GP-CONTROL (BLADE LIFT)(RIGHT)  
5. 245-9542 Y [1] VALVE GP-CONTROL (WING TILT)  
6. 245-9543 Y [1] VALVE GP-CONTROL (WING LIFT)  
7. 248-6174 [4] ROD  
9. 273-1871 [1] COVER  
10. 292-2034 Y [1] MANIFOLD GP-VALVE (INLET)(FRONT)  
11. 292-9221 [1] PLUG AS  
  292-9220 [1] PLUG  
  294-8055 [1] SEAL-O-RING  
12. 148-8411 [10] PLUG AS  
    (EACH INCLUDES)
  9S-4185 [1] PLUG (3/4-16-THD)  
  3K-0360 [1] SEAL-O-RING  
13. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
14. 8T-4133 M [4] NUT (M10X1.5-THD)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP50321018
 

382-4404: VALVE GP-BANK 5

382-4404 VALVE GP-BANK 5 -FRONT
S/N D9T1-UP
PART OF 242-5056, 365-5539, 422-1612 CONTROL AR-HYDRAULIC
AN ATTACHMENT
i05389725 SEBP5032
3824404 VALVE GP-BANK 5 Parts scheme
  For full view, you need register

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 248-6174 [4] ROD  
2. 273-1871 [1] COVER  
3. 292-9221 [1] PLUG AS  
  292-9220 [1] PLUG  
  294-8055 [1] SEAL-O-RING  
4. 366-4700 [10] PLUG AS  
    (EACH INCLUDES)
  360-3693 [1] PLUG (3/4-16-THD)  
  3K-0360 [1] SEAL-O-RING  
5. 372-0918 [6] SEAL-INTEGRAL  
6. 382-3290 Y [1] VALVE GP-CONTROL (BLADE TIP)  
7. 382-3294 Y [1] VALVE GP-CONTROL (CENTERSHIFT)  
8. 382-3301 Y [1] VALVE GP-CONTROL (BLADE TIP)(SIDE)  
9. 382-3305 Y [1] VALVE GP-CONTROL (WHEEL LEAN)  
10. 382-3316 Y [1] VALVE GP-CONTROL (CIRCLE)  
11. 8T-4133 M [4] NUT (M10X1.5-THD)  
12. 388-4280 Y [1] MANIFOLD GP-VALVE (INLET)  
13. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP50321019
 

382-4420: VALVE GP-BANK 5

382-4420 VALVE GP-BANK 5 -REAR
S/N D9T1-UP
PART OF 438-5425, 438-5426 CONTROL AR-HYDRAULIC
AN ATTACHMENT
i05372573 SEBP5032
3824420 VALVE GP-BANK 5 Parts scheme
  For full view, you need register

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 248-6174 [4] ROD  
2. 273-1871 [1] COVER  
3. 292-9221 [1] PLUG AS  
  292-9220 [1] PLUG  
  294-8055 [1] SEAL-O-RING  
4. 366-4700 [10] PLUG AS  
    (EACH INCLUDES)
  3K-0360 [1] SEAL-O-RING  
  360-3693 [1] PLUG (3/4-16-THD)  
5. 371-6093 Y [1] VALVE GP-CONTROL (ARTICULATION)  
6. 372-0918 [6] SEAL-INTEGRAL  
7. 380-1747 Y [1] VALVE GP-CONTROL (BLADE LIFT)(LEFT)  
7A. 380-1747 Y [1] VALVE GP-CONTROL (BLADE LIFT)(RIGHT)  
8. 382-3296 Y [1] VALVE GP-CONTROL (WING TILT)  
9. 382-3297 Y [1] VALVE GP-CONTROL (WING LIFT)  
10. 8T-4133 M [4] NUT (M10X1.5-THD)  
11. 388-4281 Y [1] MANIFOLD GP-VALVE (INLET)  
12. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Caterpillar Parts SIS Catalog 160M :

VALVE GP-BANK 1
355-4097 VALVE GP-BANK 1
TANK GP-HYDRAULIC
241-3867 TANK GP-HYDRAULIC
TANK & MTG GP-HYDRAULIC
233-4259 TANK & MTG GP-HYDRAULIC
SWIVEL GP
452-9419 SWIVEL GP
SWIVEL GP
362-5223 SWIVEL GP
SWIVEL GP
362-5223 SWIVEL GP
SWIVEL GP
362-5222 SWIVEL GP
SWIVEL GP
361-8144 SWIVEL GP
VALVE GP-BANK 3
382-4418 VALVE GP-BANK 3
VALVE GP-BANK 3
487-3027 VALVE GP-BANK 3
VALVE GP-BANK 4
248-6169 VALVE GP-BANK 4
VALVE GP-BANK 4
382-4419 VALVE GP-BANK 4
VALVE GP-BANK 4
487-3028 VALVE GP-BANK 4
VALVE GP-BANK 5
248-6168 VALVE GP-BANK 5
VALVE GP-BANK 5
249-7299 VALVE GP-BANK 5
VALVE GP-BANK 5
382-4404 VALVE GP-BANK 5

Truck sale:

Caterpillar 160M2, Construction
207,000 
Caterpillar 160M2, Construction
- motor graders
N C MACHINERY CO.
Caterpillar 160M2, Construction
173,900 
Caterpillar 160M2, Construction
- motor graders
N C MACHINERY CO.
Caterpillar 160M2, Construction
209,900 
Caterpillar 160M2, Construction
- motor graders
N C MACHINERY CO.
Caterpillar 160M2, Construction
204,900 
Caterpillar 160M2, Construction
- motor graders
N C MACHINERY CO.
Caterpillar 160M2, Construction
217,000 
Caterpillar 160M2, Construction
- motor graders
TRACTOR & EQUIPMENT CO.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.