AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

524-8604 EXTENSION GP-BLADE S/N D9T1-UP BLADE ATTACHMENT KIT FIELD INSTALLATION 160M MOTOR GRADER


WORK TOOLS
BLADE GP
HYDRAULIC SYSTEM
LIFT GP
WORK TOOLS
RIPPER GP
FRAME AND BODY
FRAME GP

MOTOR GRADER 160M MOTOR GRADER D9T
 160M Motor Grader - All Wheel Drive D9T00001-UP (MACHINE) POWERED BY C9 Engine SEBP5032 160M D9T   (2007)

WORK TOOLS

BLADE GP
EXTENSION GP-BLADE
452-3133 EXTENSION GP-BLADE
524-8603 EXTENSION GP-BLADE
524-8604 EXTENSION GP-BLADE
LIFT GP-BLADE
261-8536 LIFT GP-BLADE
LIFT GP-BLADE
296-3008 LIFT GP-BLADE
 

#SEBP50321340
 

524-8604: EXTENSION GP-BLADE

524-8604 EXTENSION GP-BLADE
S/N D9T1-UP
BLADE ATTACHMENT KIT
FIELD INSTALLATION
i06922561 SEBP5032
  For full view, you need register

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  452-3137 [1] ANGLE AS  
  2A-1538 [2] BOLT (3/4-10X2.25-IN)  
  5F-8933 [10] BOLT-PLOW (3/4-10X3.75-IN)  
  5J-4773 [5] BOLT-PLOW (3/4-10X2.5-IN)  
  3G-2165 [1] EDGE-CUTTING  
  133-7524 [1] EXTENSION  
  2J-3506 [15] NUT-FULL (3/4-10-THD)  
  452-3134 [1] PLATE AS  
  110-5334 [3] SPACER (3-MM THK)  
  176-5642 [1] SPACER (2-MM THK)  
  176-5643 [2] SPACER (1-MM THK)  
  2S-0115 [2] WASHER-HARD (20X36.5X5-MM THK)  
 

#SEBP50321341
 

261-8536: LIFT GP-BLADE

261-8536 LIFT GP-BLADE
S/N D9T1-104
PART OF 321-2933 COMMON AR
i02780365 SEBP5032
2618536 LIFT GP-BLADE Parts scheme 2618536 LIFT GP-BLADE Parts scheme
  For full view, you need register

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7D-8875 [4] WASHER-THRUST (2.515X3.62X0.075-IN THK)  
2. 7D-8878 [4] WASHER-THRUST (3.015X4.22X0.075-IN THK)  
3. 7D-8879 B [8] SHIM (0.127-MM THK)  
4. 7D-8881 B [6] SHIM (0.254-MM THK)  
5. 7D-8882 B [2] SHIM (0.508-MM THK)  
6. 8D-4336 B [2] WASHER-THRUST (76.6X146X1.90-MM THK)  
7. 8X-5106 [1] STUD-BALL  
8. 8X-5107 [1] PIN  
9. 8X-5109 [1] BAR AS  
  8X-5108 [2] BUSHING  
  124-5836 [5] BUSHING  
10. 123-8187 B [2] WASHER-THRUST (76.6X146X1-MM THK)  
11. 201-8034 M [6] BOLT (M20X2.5X120-MM)  
12. 259-2627 M [4] BOLT (M12X1.75X40-MM)  
13. 259-4483 [2] PIN  
14. 259-4492 [2] LOCK  
15. 261-8537 [1] ARM AS (LH)  
  7D-8889 [1] BEARING (76.35-MM ID)  
  8D-8168 [1] BEARING (63.65-MM ID)  
16. 261-8538 [1] ARM AS (RH)  
  7D-8889 [1] BEARING (76.35-MM ID)  
  8D-8168 [1] BEARING (63.65-MM ID)  
17. 261-8541 [2] YOKE AS  
    (EACH INCLUDES)
  2G-8233 [1] RING  
18. 261-8543 [2] RETAINER  
19. 261-8545 [1] PLATE  
20. 261-8547 [2] LOCK  
21. 288-0735 M [1] BOLT (M12X1.75X60-MM)  
22. 112-3926 M [4] BOLT (M20X2.5X110-MM)  
23. 267-3508 [16] WASHER-HARD (22X35X3.5-MM THK)  
24. 279-6632 [5] WASHER (13.5X25.5X3-MM THK)  
25. 286-0742 M [6] NUT (M20X2.5-THD)  
26. 3P-1461 [4] SEAL-LIP TYPE  
27. 5F-0149 [2] SEAL-O-RING  
28. 7D-8876 [2] WASHER-THRUST (65.07X92.08X2.39-MM THK)  
29. 7D-8877 [2] WASHER-THRUST (77.77X107.19X2.39-MM THK)  
30. 7D-8883 [2] SEAL  
31. 7D-8884 [2] SEAL  
32. 7H-2444 [2] SEAL-O-RING  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP50321342
 

296-3008: LIFT GP-BLADE

296-3008 LIFT GP-BLADE
S/N D9T105-UP
PART OF 321-2933, 349-2554 COMMON AR
i03304403 SEBP5032
2963008 LIFT GP-BLADE Parts scheme 2963008 LIFT GP-BLADE Parts scheme 2963008 LIFT GP-BLADE Parts scheme
  For full view, you need register

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7D-8875 [4] WASHER-THRUST (2.515X3.62X0.075-IN THK)  
2. 7D-8878 [4] WASHER-THRUST (3.015X4.22X0.075-IN THK)  
3. 7D-8879 B [8] SHIM (0.127-MM THK)  
4. 7D-8881 B [6] SHIM (0.254-MM THK)  
5. 7D-8882 B [2] SHIM (0.508-MM THK)  
6. 8D-4336 B [2] WASHER-THRUST (76.6X146X1.90-MM THK)  
7. 8X-5106 [1] STUD-BALL  
8. 8X-5107 [1] PIN  
9. 381-0356 [1] BAR AS-LINK  
9A. 8X-5108 [2] BUSHING  
9B. 382-4604 [7] BUSHING  
10. 123-8187 B [6] WASHER-THRUST (76.6X146X1-MM THK)  
11. 201-8034 M [6] BOLT (M20X2.5X120-MM)  
12. 8T-0558 M [4] BOLT-SELF-LOCKING (M12X1.75X50-MM)  
13. 259-4483 [2] PIN  
14. 259-4492 [2] LOCK  
15. 296-3004 [1] ARM AS-LIFT (LH)  
15A. 7D-8889 [1] BEARING (76.35-MM ID)  
15B. 8D-8168 [1] BEARING (63.65-MM ID)  
16. 296-3005 [1] ARM AS-LIFT (RH)  
16A. 7D-8889 [1] BEARING (76.35-MM ID)  
16B. 8D-8168 [1] BEARING (63.65-MM ID)  
17. 261-8541 [2] YOKE AS  
    (EACH INCLUDES)
  2G-8233 [1] RING  
18. 261-8543 [2] RETAINER  
19. 261-8545 [1] PLATE  
20. 261-8547 [2] LOCK  
21. 8T-4910 M [1] BOLT (M12X1.75X60-MM)  
22. 112-3926 M [4] BOLT (M20X2.5X110-MM)  
23. 8T-4123 [16] WASHER (22X35X3.5-MM THK)  
24. 8T-4223 [1] WASHER-HARD (13.5X25.5X3-MM THK)  
25. 8T-4131 M [6] NUT (M20X2.5-THD)  
26. 3P-1461 [4] SEAL-LIP TYPE  
27. 5F-0149 [2] SEAL-O-RING  
28. 7D-8876 [2] WASHER-THRUST (65.07X92.08X2.39-MM THK)  
29. 7D-8877 [2] WASHER-THRUST (77.77X107.19X2.39-MM THK)  
30. 7D-8883 [2] SEAL  
31. 7D-8884 [2] SEAL  
32. 7H-2444 [2] SEAL-O-RING  
33. 198-4778 [4] WASHER-HARD (13.5X30X12-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP50321343
 

293-5556: LIFT GP-WORK TOOL

293-5556 LIFT GP-WORK TOOL
S/N D9T1-UP
FOR USE WITH PLOW/BULLDOZER-LIFT VALVE AND LINES GP TO FRONT OF MOTORGRADER
AN ATTACHMENT
i05382843 SEBP5032
2935556 LIFT GP-WORK TOOL Parts scheme
  For full view, you need register

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  293-5559 FY [1] BRACE GP (WORK TOOL LIFT)  
   
1. 1F-6762 [4] BOLT (1-1/2-12X4.5-IN)  
2. 2K-7468 [1] LOCKNUT (1-1/4-12-THD)  
3. 3B-8489 [11] FITTING-GREASE (1/8-27 PTF)  
4. 4H-6511 [1] BOLT (1-1/4-12X6.5-IN)  
5. 5F-9891 [4] BOLT (1-1/2-12X6-IN)  
6. 9X-2521 [8] NUT-FULL  
7. 137-4234 [1] PLATE-IDENTIFICATION (WORK TOOL)  
8. 170-4910 [1] FRAME AS-COUPLER  
9. 172-8121 [2] SPACER (34.925X60.325X14.2-MM THK)  
10. 172-8122 [2] PIN AS  
11. 172-8125 [3] PIN (SNAP)  
12. 172-8126 [1] FILM-WARNING (CRUSH HAZARD)  
13. 172-8127 [1] PIN AS (LOCKING)  
14. 172-8287 I [1] HOSE AS  
15. 172-8288 I [1] HOSE AS  
16. 194-3655 [2] BEARING GP  
17. 195-3330 [1] PLATE AS-MOUNTING  
18. 217-3501 Y [1] CYLINDER GP-HYDRAULIC (WORK TOOL LIFT)  
19. 284-7971 [1] ARM AS (LOWER)  
20. 284-7972 [1] ARM AS (UPPER)  
22. 2M-9780 [4] SEAL-O-RING  
23. 3J-1907 [4] SEAL-O-RING  
24. 5P-8245 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
25. 6V-8397 [4] SEAL-O-RING  
26. 6V-8636 [1] CONNECTOR  
27. 6V-8724 [3] ELBOW (90-DEG)  
28. 9X-8875 [4] BOLT (1/2-13X3.5-IN)  
  F   NOT SHOWN
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  Y   SEPARATE ILLUSTRATION
 

#SEBP50321344
 

293-5556: LIFT GP-WORK TOOL

293-5556 LIFT GP-WORK TOOL
S/N D9T1-UP
PART OF 312-2204 LIFT GP-WORK TOOL
FOR USE WITH PLOW/BULLDOZER-LIFT VALVE AND LINES GP TO FRONT OF MOTORGRADER
AN ATTACHMENT
i02788557 SEBP5032
2935556 LIFT GP-WORK TOOL Parts scheme
  For full view, you need register

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1F-6762 [4] BOLT (1-1/2-12X4.5-IN)  
2. 2K-7468 [1] LOCKNUT (1-1/4-12-THD)  
3. 3B-8489 [11] FITTING-GREASE (1/8-27 PTF)  
4. 4H-6511 [1] BOLT (1-1/4-12X6.5-IN)  
5. 5F-9891 [4] BOLT (1-1/2-12X6-IN)  
6. 9X-2521 [8] NUT-FULL  
7. 137-4234 [1] PLATE-IDENTIFICATION (WORK TOOL)  
8. 170-4910 [1] FRAME AS-COUPLER  
9. 172-8121 [2] SPACER (34.925X60.325X14.2-MM THK)  
10. 172-8122 [2] PIN AS  
11. 172-8125 [3] PIN (SNAP)  
12. 172-8126 [1] FILM-WARNING (CRUSH HAZARD)  
13. 172-8127 [1] PIN AS (LOCKING)  
14. 172-8287 I [1] HOSE AS  
15. 172-8288 I [1] HOSE AS  
16. 194-3655 [2] BEARING GP  
17. 195-3330 [1] PLATE AS-MOUNTING  
18. 217-3501 Y [1] CYLINDER GP-HYDRAULIC (WORK TOOL LIFT)  
19. 284-7971 [1] ARM AS (LOWER)  
20. 284-7972 [1] ARM AS (UPPER)  
22. 2M-9780 [4] SEAL-O-RING  
23. 3J-1907 [4] SEAL-O-RING  
24. 5P-8245 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
25. 6V-8397 [4] SEAL-O-RING  
26. 6V-8636 [1] CONNECTOR  
27. 6V-8724 [3] ELBOW (90-DEG)  
28. 9X-8875 [4] BOLT (1/2-13X3.5-IN)  
   
  293-5559 FY [1] BRACE GP (WORK TOOL LIFT)  
  F   NOT SHOWN
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  Y   SEPARATE ILLUSTRATION
 

#SEBP50321345
 

312-2204: LIFT GP-WORK TOOL

312-2204 LIFT GP-WORK TOOL
S/N D9T1-UP
FOR USE WITH @@@@@365-3354@@@@@, @@@@@365-3355@@@@@, @@@@@365-3368@@@@@, @@@@@365-3369@@@@@
CANNOT BE USED WITH @@@@@250-3071@@@@@, @@@@@309-6809@@@@@, @@@@@351-5178@@@@@
FOR USAGE REFER TO CHART @@@@@309-9859@@@@@, @@@@@309-9873@@@@@
AN ATTACHMENT
i02788354 SEBP5032
  For full view, you need register

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  293-5556 Y [1] LIFT GP-WORK TOOL  
  Y   SEPARATE ILLUSTRATION
 

#SEBP50321346
 

177-6821: MOUNTING GP-RIPPER

177-6821 MOUNTING GP-RIPPER
S/N D9T1-UP
PART OF 175-2559 RIPPER AR
AN ATTACHMENT
i01833420 SEBP5032
1776821 MOUNTING GP-RIPPER Parts scheme
  For full view, you need register

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3W-7254 [2] SPACER (47X80X20-MM THK)  
2. 3W-7256 [2] SPACER (47X80X16-MM THK)  
3. 6P-5647 [2] BOSS  
4. 8E-6130 [2] LINK AS  
    (EACH INCLUDES)
  2K-4233 [1] BOSS  
5. 104-4523 [2] CAM AS  
6. 177-6822 [1] PLATE AS  
7. 109-6776 [2] PIN  
8. 1K-6872 [2] LOCKNUT (1/2-13-THD)  
9. 2K-4973 [4] LOCKNUT (3/8-16-THD)  
10. 7X-0292 [4] BOLT (3/8-16X4.5-IN)  
11. 7X-0333 [2] BOLT (1/2-13X4.75-IN)  
12. 7X-0403 [10] BOLT (1-8X2.25-IN)  
13. 8T-5361 [10] WASHER-HARD (28X49X5-MM THK)  
14. 9W-7469 [2] PIN  
15. 9W-7470 [2] PIN  
 

#SEBP50321347
 

248-1323: MOUNTING GP-RIPPER

248-1323 MOUNTING GP-RIPPER
S/N D9T1-UP
PART OF 248-1322, 296-3528 RIPPER AR
CANNOT BE USED WITH @@@@@264-2392@@@@@, @@@@@248-1322@@@@@, @@@@@296-3528@@@@@
AN ATTACHMENT
i02783083 SEBP5032
2481323 MOUNTING GP-RIPPER Parts scheme
  For full view, you need register

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3W-7254 [2] SPACER (47X80X20-MM THK)  
2. 3W-7256 [2] SPACER (47X80X16-MM THK)  
3. 6P-5647 [2] BOSS  
4. 104-4523 [2] CAM AS  
5. 248-1326 [1] PLATE AS  
  104-4522 [2] PLATE  
6. 291-6300 [2] LINK AS  
    (EACH INCLUDES)
  3V-2024 [1] BOSS  
7. 293-2476 [2] PIN  
8. 106-4175 M [8] BOLT (M20X2.5X60-MM)  
9. 129-3180 M [2] LOCKNUT (M12X1.75-THD)  
10. 267-3506 [6] WASHER-HARD (26X44X4-MM THK)  
11. 267-3508 [8] WASHER-HARD (22X35X3.5-MM THK)  
12. 7X-2543 M [2] BOLT (M10X1.5X120-MM)  
13. 7X-2544 M [2] BOLT (M10X1.5X140-MM)  
14. 8T-0389 M [4] LOCKNUT (M10X1.5-THD)  
15. 8T-5041 M [2] BOLT (M12X1.75X120-MM)  
16. 9W-7469 [2] PIN  
17. 9W-7470 [2] PIN  
18. 9X-2615 M [6] BOLT (M24X3X60-MM)  
  M   METRIC PART
 

#SEBP50321348
 

332-2282: MOUNTING GP-RIPPER

332-2282 MOUNTING GP-RIPPER
S/N D9T1-UP
PART OF 324-0889 RIPPER AR
AN ATTACHMENT
i03921213 SEBP5032
3322282 MOUNTING GP-RIPPER Parts scheme
  For full view, you need register

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3W-7254 [2] SPACER (47X80X20-MM THK)  
2. 3W-7256 [2] SPACER (47X80X16-MM THK)  
3. 6P-5647 [2] BOSS  
4. 104-4523 [2] CAM AS  
5. 293-2476 [2] PIN  
6. 332-2284 [2] LINK AS  
7. 332-7384 [1] PLATE AS  
8. 106-4175 M [8] BOLT (M20X2.5X60-MM)  
9. 114-6099 M [6] BOLT (M24X3X80-MM)  
10. 129-3180 M [2] LOCKNUT (M12X1.75-THD)  
11. 267-3507 [6] WASHER-HARD (26X47X12-MM THK)  
12. 283-1578 [8] WASHER-HARD (22X45X10-MM THK)  
13. 7X-2544 M [2] BOLT (M10X1.5X140-MM)  
14. 8T-0389 M [4] LOCKNUT (M10X1.5-THD)  
15. 8T-5041 M [2] BOLT (M12X1.75X120-MM)  
16. 8T-6685 M [2] BOLT (M10X1.5X110-MM)  
17. 9W-7469 [2] PIN  
18. 9W-7470 [2] PIN  
  M   METRIC PART
 

#SEBP50321349
 

249-7587: MOUNTING GP-SNOW WING

249-7587 MOUNTING GP-SNOW WING -FRONT, RH
S/N D9T1-UP
PART OF 349-3066 OPTION AR-LIGHTING
AN ATTACHMENT
i02783125 SEBP5032
2497587 MOUNTING GP-SNOW WING Parts scheme
  For full view, you need register

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 255-2410 [1] PLATE  
2. 260-6731 [1] PLATE AS  
3. 284-8931 [1] PLATE-MOUNTING  
4. 284-8932 [2] PLATE  
5. 287-1640 [1] PLATE (RH)  
6. 287-1641 [1] PLATE (LH)  
 

Information:

Caterpillar Parts SIS Catalog 160M :

524-8603 EXTENSION GP-BLADE
EXTENSION GP-BLADE
452-3133 EXTENSION GP-BLADE
EXTENSION GP-BLADE
452-3132 EXTENSION GP-BLADE
EXTENSION GP-BLADE
250-0615 EXTENSION GP-BLADE
EXTENSION GP-BLADE
243-6685 EXTENSION GP-BLADE
EXTENSION GP-BLADE
110-5327 EXTENSION GP-BLADE
EXTENSION GP-BLADE
110-5326 EXTENSION GP-BLADE
EDGE-CUTTING
489-6705 EDGE-CUTTING
LIFT GP-BLADE
261-8536 LIFT GP-BLADE
LIFT GP-BLADE
296-3008 LIFT GP-BLADE
LIFT GP-WORK TOOL
293-5556 LIFT GP-WORK TOOL
LIFT GP-WORK TOOL
293-5556 LIFT GP-WORK TOOL
312-2204 LIFT GP-WORK TOOL
MOUNTING GP-RIPPER
177-6821 MOUNTING GP-RIPPER
MOUNTING GP-RIPPER
248-1323 MOUNTING GP-RIPPER
MOUNTING GP-RIPPER
332-2282 MOUNTING GP-RIPPER

Truck sale:

Caterpillar 160M2, Construction
207,000 
Caterpillar 160M2, Construction
- motor graders
N C MACHINERY CO.
Caterpillar 160M2, Construction
173,900 
Caterpillar 160M2, Construction
- motor graders
N C MACHINERY CO.
Caterpillar 160M2, Construction
209,900 
Caterpillar 160M2, Construction
- motor graders
N C MACHINERY CO.
Caterpillar 160M2, Construction
204,900 
Caterpillar 160M2, Construction
- motor graders
N C MACHINERY CO.
Caterpillar 160M2, Construction
217,000 
Caterpillar 160M2, Construction
- motor graders
TRACTOR & EQUIPMENT CO.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.