AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

255-8715 CYLINDER GP-STEERING S/N R9L1-UP 76.2-MM (3-IN) BORE X 287-MM (11.3-IN) STROKE PART OF 279-5746 CYLINDER & MTG GP-STEERING 160M 2


HYDRAULIC SYSTEM
CYLINDER GP
DRIVE GP
FILTER GP

MOTOR GRADER 160M 2 MOTOR GRADER R9L
 160M Series 2 MOTOR GRADER R9L00001-UP (MACHINE) POWERED BY C9 ENGINE SEBP5033 160M 2 R9L   (2011)

HYDRAULIC SYSTEM

CYLINDER GP
CYLINDER GP-SIDESHIFT
249-4116 CYLINDER GP-SIDESHIFT
CYLINDER GP-SIDESHIFT
509-6993 CYLINDER GP-SIDESHIFT
CYLINDER GP-STEERING
255-8715 CYLINDER GP-STEERING
CYLINDER GP-STEERING
389-6062 CYLINDER GP-STEERING
CYLINDER GP-STEERING
389-6062 CYLINDER GP-STEERING
CYLINDER GP-WHEEL LEAN
249-5299 CYLINDER GP-WHEEL LEAN
 

#SEBP50330790
 

255-8715: CYLINDER GP-STEERING

255-8715 CYLINDER GP-STEERING
S/N R9L1-UP
76.2-MM (3-IN) BORE X 287-MM (11.3-IN) STROKE
PART OF 279-5746 CYLINDER & MTG GP-STEERING
i02183783 SEBP5033
2558715 CYLINDER GP-STEERING Parts scheme
  For full view, you need register

Parts for your 160M 2 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9X-1386 E SLEEVE (3-CM)  
1A. 9X-1386 E SLEEVE (9-CM)  
2. 102-2244 [1] GROMMET  
3. 151-7038 [1] HEAD  
4. 212-0907 [1] PLATE-CONNECTOR  
5. 214-6480 [1] PISTON  
6. 217-3311 [1] MAGNET (RING)  
7. 276-1816 [1] GUARD  
8. 242-9514 [1] CARRIER  
9. 242-9515 [1] RING-RETAINING  
10. 248-8805 [1] ROD AS  
11. 249-5193 [1] SENSOR GP-POSITION (STEERING CYLINDER)  
  9X-3401 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
12. 258-9864 [1] CYLINDER AS  
  095-0879 [1] PIN-SPRING  
  310-4759 [1] BOSS AS  
13. 289-2935 [1] SEAL AS-BUFFER  
14. 289-2946 [1] SEAL-U-CUP  
15. 188-2199 [1] SEAL-O-RING  
16. 1H-7339 [1] SEAL-O-RING  
17. 215-1942 [1] RING-BACKUP  
18. 223-3353 [1] RING-WEAR  
19. 308-1845 [1] SEAL-WIPER  
20. 102-8804 [1] KIT-RECEPTACLE (4-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
21. 3V-2431 [2] WASHER (10.2X16X2-MM THK)  
22. 4S-5565 [2] BOLT (3/8-16X0.875-IN)  
23. 4T-5613 [1] RING-WEAR  
24. 5J-4561 [1] LOCKNUT (1-14-THD)  
25. 6J-1972 [1] SEAL AS  
27. 6J-5731 [1] RING-BACKUP  
28. 8T-5070 [1] SETSCREW-SOCKET (3/8-16X0.5-IN)  
29. 8T-8737 [1] PLUG-SEAL  
30. 162-0177 [1] PLUG AS  
  9S-8004 [1] PLUG (9/16-18-THD)  
  3J-1907 [1] SEAL-O-RING  
  E   ORDER BY THE CENTIMETER
 

#SEBP50330791
 

389-6062: CYLINDER GP-STEERING

389-6062 CYLINDER GP-STEERING
S/N R9L1-UP
76.2-MM (3-IN) BORE X 287-MM (11.3-IN) STROKE
PART OF 390-0593 CYLINDER & MTG GP-STEERING
Type 1
i05413876 SEBP5033
3896062 CYLINDER GP-STEERING Parts scheme
  For full view, you need register

Parts for your 160M 2 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4T-5613 J [1] RING-WEAR  
2. 6J-1972 J [1] SEAL AS  
3. 6J-5731 J [1] RING-BACKUP  
4. 151-7038 [1] HEAD  
5. 217-3312 [1] MAGNET  
6. 223-3353 J [1] RING-WEAR  
7. 289-2935 J [1] SEAL AS-BUFFER  
8. 289-2946 J [1] SEAL-U-CUP  
9. 308-1845 J [1] SEAL-WIPER  
10. 350-3842 M [2] SETSCREW (M8X1.25X12.3-MM)  
11. 451-2628 [1] SENSOR GP-POSITION (LINEAR)(STEERING CYLINDER)  
  118-8586 J [1] SEAL-O-RING  
  420-5767 J [1] RING-BACKUP  
12. 376-8250 [1] SPRING-WAVE  
13. 383-7670 [1] PISTON  
14. 389-6077 [1] CYLINDER AS-STEERING  
  289-6002 [1] ELBOW AS  
  1N-5999 [2] PLUG-O-RING  
  7J-0204 [2] SEAL-O-RING  
15. 449-5422 [1] ROD AS  
16. 435-3388 [1] RECEPTACLE AS  
17. 109-1393 M [3] BOLT-SOCKET HEAD (M4X0.7X10-MM)  
18. 1H-7339 J [1] SEAL-O-RING  
19. 3J-7354 [1] SEAL-O-RING  
20. 5S-4455 [1] RING-RETAINING  
21. 8T-9102 M [1] SETSCREW-SOCKET (M5X0.8X10-MM)  
22. 9S-8002 [1] PLUG (7/16-20-THD)  
   
    AVAILABLE REPAIR KIT(S):
  471-0161 J [1] KIT-HYD CYLINDER SEAL  
    (INCLUDES RINGS, O-RINGS & SEALS)
  J   KIT MARKED J SERVICED PARTS MARKED J
  M   METRIC PART
 

#SEBP50330792
 

389-6062: CYLINDER GP-STEERING

389-6062 CYLINDER GP-STEERING
S/N R9L1-UP
76.2-MM (3-IN) BORE X 287-MM (11.3-IN) STROKE
PART OF 390-0593 CYLINDER & MTG GP-STEERING
Type 2
i06997327 SEBP5033
3896062 CYLINDER GP-STEERING Parts scheme
  For full view, you need register

Parts for your 160M 2 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4T-5613 [1] RING-WEAR  
2. 6J-1972 [1] SEAL AS  
3. 6J-5731 [1] RING-BACKUP  
4. 151-7038 [1] HEAD  
5. 217-3312 [1] MAGNET  
6. 223-3353 [1] RING-WEAR  
7. 289-2935 [1] SEAL AS-BUFFER  
8. 289-2946 [1] SEAL-U-CUP  
9. 308-1845 [1] SEAL-WIPER  
10. 350-3842 M [2] SETSCREW (M8X1.25X12.3-MM)  
11. 451-2628 [1] SENSOR GP-POSITION (LINEAR)(STEERING CYLINDER)  
  118-8586 [1] SEAL-O-RING  
  420-5767 [1] RING-BACKUP  
12. 376-8250 [1] SPRING-WAVE  
13. 383-7670 [1] PISTON  
14. 389-6077 [1] CYLINDER AS-STEERING  
  289-6002 [1] ELBOW AS  
  1N-5999 [2] PLUG-O-RING  
  7J-0204 [2] SEAL-O-RING  
15. 449-5422 [1] ROD AS  
16. 435-3388 [1] RECEPTACLE AS  
17. 109-1393 M [3] BOLT-SOCKET HEAD (M4X0.7X10-MM)  
18. 1H-7339 [1] SEAL-O-RING  
19. 3J-7354 [1] SEAL-O-RING  
20. 5S-4455 [1] RING-RETAINING  
21. 8T-9102 M [1] SETSCREW-SOCKET (M5X0.8X10-MM)  
22. 9S-8002 [1] PLUG (7/16-20-THD)  
  M   METRIC PART
 

#SEBP50330793
 

249-5299: CYLINDER GP-WHEEL LEAN

249-5299 CYLINDER GP-WHEEL LEAN
S/N R9L1-UP
88.9-MM (3.5-IN) BORE X 149-MM (5.87-IN) STROKE
PART OF 260-8713 CYLINDER & MTG GP-WHEEL LEAN
i02189514 SEBP5033
2495299 CYLINDER GP-WHEEL LEAN Parts scheme
  For full view, you need register

Parts for your 160M 2 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 251-1550 [1] CYLINDER AS  
1A. 2G-8631 [1] BUSHING  
2. 173-9683 M [1] BOLT (M30X3.5X90-MM)  
3. 9X-8399 [1] WASHER (33X56X6-MM THK)  
4. 4T-8054 J [1] SEAL AS  
5. 7J-9885 J [1] RING-WEAR  
6. 9T-9040 [1] PISTON  
7. 175-7898 J [1] SEAL-O-RING  
8. 1S-0669 J [1] RING (BACKUP)  
9. 6E-4974 [1] HEAD  
  308-1845 [1] SEAL-WIPER  
10. 121-9245 [1] ROD AS  
10A. 2G-8631 [1] BUSHING  
11. 308-1845 J [1] SEAL-WIPER  
12. 356-8331 J [1] SEAL-U-CUP  
13. 289-2935 J [1] SEAL AS-BUFFER  
14. 4T-5613 J [1] RING-WEAR  
   
    AVAILABLE REPAIR KIT(S):
  376-9011 J [1] KIT-HYD CYLINDER SEAL  
    (INCLUDES RINGS & SEALS)
    (FOR USE WITH REHS1392)
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP50330794
 

253-4677: DRIVE GP-CIRCLE

253-4677 DRIVE GP-CIRCLE
S/N R9L1-205
PART OF 353-2925 COMMON AR
i04035909 SEBP5033
2534677 DRIVE GP-CIRCLE Parts scheme 2534677 DRIVE GP-CIRCLE Parts scheme
  For full view, you need register

Parts for your 160M 2 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1B-4038 [2] CUP-BEARING  
2. 1B-4046 [2] CONE-BEARING  
3. 2G-0478 [5] PLATE-CLUTCH  
4. 2G-6695 [1] BRACKET  
5. 5K-5288 [1] SEAL GP-DUO-CONE  
  5K-5129 [2] RING-SEALING  
6. 323-8674 C [1] GEAR-WORM (36-TEETH)  
7. 6G-5534 [1] COVER AS  
  6G-5537 [1] BEARING  
8. 6G-5538 [1] COVER  
9. 6G-5542 [2] SPACER (119.2X178X9.3-MM THK)  
10. 6G-6122 [1] SPRING-DISC  
11. 6Y-7953 [6] DISC-FRICTION  
12. 7D-8983 B [10] SHIM (0.005-IN THK)  
13. 7D-8984 B [6] SHIM (0.007-IN THK)  
14. 8D-7423 [1] WASHER-SPECIAL (81.03X48.41X1.6MM THK)  
15. 8D-7424 [1] SPACER (48X81X6-MM THK)  
16. 8T-0336 [1] FITTING-PRESSURE RELIEF  
17. 323-8675 C [1] WORM-CIRCLE DRIVE  
18. 9D-1491 [1] COUPLING  
19. 105-3196 Y [1] MOTOR GP-GEROTOR (CIRCLE DRIVE)  
20. 253-4678 [1] HOUSING AS-DRIVE  
  2D-8154 [4] STUD-TAPERLOCK (1/2-13X2.36-IN)  
  8D-7426 [1] BUSHING  
  286-2631 M [4] STUD-TAPERLOCK (M20X2.5X85-MM)  
21. 261-8553 [1] PINION-CIRCLE DRIVE  
22. 307-1958 [1] SHAFT-PINION DRIVE  
23. 307-1959 B [6] SHIM (0.13-MM THK)  
24. 307-1960 B [1] SHIM (0.25-MM THK)  
25. 307-1961 [1] PLATE  
26. 307-1962 B [4] SHIM (0.5-MM THK)  
27. 0S-1585 [4] BOLT (1/2-13X1.5-IN)  
28. 1A-1415 [1] NUT (1-7/8-12-THD)  
29. 1B-5174 [1] PLUG-PIPE  
30. 1F-7958 [4] NUT-FULL (1/2-13-THD)  
31. 1H-7339 [1] SEAL-O-RING  
32. 2B-0858 [1] PLUG-PIPE (OIL DRAIN)  
33. 2H-9247 [1] SEAL-O-RING  
34. 4F-9653 [1] SEAL-O-RING  
35. 4H-6996 [1] PIN-SPRING  
36. 5H-4909 [1] SEAL-O-RING  
37. 5K-8454 [3] BOLT (1/2-13X1.12-IN)  
38. 5P-8245 [16] WASHER-HARD (13.5X25.5X3-MM THK)  
39. 5S-7379 [4] BOLT (3/8-16X0.875-IN)  
40. 6G-5539 [1] GASKET  
41. 6G-5548 [1] SPACER (69.5X89X0.8-MM THK)  
42. 6H-1717 [5] BOLT (1/2-13X1.125-IN)  
43. 6V-5686 M [3] BOLT (M16X2X50-MM)  
44. 8D-5054 [3] WASHER-HARD (17X30X3-MM THK)  
45. 8D-7425 [2] WASHER-THRUST (2.81X4.25X0.12-IN THK)  
46. 8T-4896 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP50330795
 

423-9923: DRIVE GP-CIRCLE

423-9923 DRIVE GP-CIRCLE
S/N R9L206-UP
PART OF 353-2925 COMMON AR
i05326456 SEBP5033
4239923 DRIVE GP-CIRCLE Parts scheme 4239923 DRIVE GP-CIRCLE Parts scheme
  For full view, you need register

Parts for your 160M 2 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1B-4038 [2] CUP-BEARING  
2. 1B-4046 [2] CONE-BEARING  
3. 2G-0478 [5] PLATE-CLUTCH  
4. 2G-6695 [1] BRACKET  
5. 5K-5288 [1] SEAL GP-DUO-CONE  
5A. 5K-5129 [2] RING-SEALING  
6. 6G-5534 [1] COVER AS  
6A. 6G-5537 [1] BEARING  
7. 6G-5538 [1] COVER  
8. 6G-5542 [2] SPACER (119.2X178X9.3-MM THK)  
9. 6G-6122 B [1] SPRING-DISC  
10. 6Y-7953 [6] DISC-FRICTION  
11. 7D-8983 B [10] SHIM (0.005-IN THK)  
12. 7D-8984 B [6] SHIM (0.007-IN THK)  
13. 457-0799 [1] LOCKNUT  
14. 8D-7424 [1] SPACER (48X81X6-MM THK)  
15. 8T-0336 [1] FITTING-PRESSURE RELIEF  
16. 9D-1491 [1] COUPLING  
17. 105-3196 Y [1] MOTOR GP-GEROTOR (CIRCLE DRIVE)  
18. 253-4678 [1] HOUSING AS-DRIVE  
18A. 8D-7426 [1] BUSHING  
  2D-8154 [4] STUD-TAPERLOCK (1/2-13X2.36-IN)  
  286-2631 M [4] STUD-TAPERLOCK (M20X2.5X85-MM)  
19. 307-1959 B [6] SHIM (0.13-MM THK)  
20. 307-1960 B [1] SHIM (0.25-MM THK)  
21. 307-1961 [1] PLATE  
22. 307-1962 B [4] SHIM (0.5-MM THK)  
23. 323-8674 [1] GEAR-WORM (36-TEETH)  
24. 323-8675 [1] WORM-CIRCLE DRIVE  
25. 458-3867 [1] SHAFT-DRIVE  
26. 458-3868 [1] PINION-CIRCLE DRIVE  
27. 0S-1585 [4] BOLT (1/2-13X1.5-IN)  
28. 1A-1415 [1] NUT (1-7/8-12-THD)  
29. 1B-5174 [1] PLUG-PIPE  
30. 1F-7958 [4] NUT-FULL (1/2-13-THD)  
31. 1H-7339 [1] SEAL-O-RING  
32. 2B-0858 [1] PLUG-PIPE  
33. 2H-3935 [1] SEAL-O-RING  
34. 2B-8293 [1] SEAL-O-RING  
35. 4H-6996 [1] PIN-SPRING  
36. 5H-4909 [1] SEAL-O-RING  
37. 5K-8454 [3] BOLT (1/2-13X1.12-IN)  
38. 5P-8245 [16] WASHER-HARD (13.5X25.5X3-MM THK)  
39. 5S-7379 [4] BOLT (3/8-16X0.875-IN)  
40. 6G-5539 [1] GASKET  
41. 6G-5548 [1] SPACER (69.5X89X0.8-MM THK)  
42. 6H-1717 [5] BOLT (1/2-13X1.125-IN)  
43. 6V-5686 M [3] BOLT (M16X2X50-MM)  
44. 8D-5054 [3] WASHER-HARD (17X30X3-MM THK)  
45. 8D-7425 [2] WASHER-THRUST (2.81X4.25X0.12-IN THK)  
46. 8T-4896 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP50330796
 

305-2892: FILTER & MTG GP-HYDRAULIC

305-2892 FILTER & MTG GP-HYDRAULIC
S/N R9L1-UP
PART OF 307-1473 SERVICE CENTER AR
Type 1
i03940170 SEBP5033
3052892 FILTER & MTG GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 160M 2 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 164-7577 Y [1] SWITCH GP-BYPASS (HYDRAULIC OIL FILTER)  
2. 242-0407 [1] VALVE AS-DRAIN (HYDRAULIC FILTER)  
3. 245-7603 [1] TUBE AS  
4. 245-8964 [1] BLOCK  
5. 249-2307 Y [1] FILTER GP-OIL (HYDRAULIC TANK RETURN)  
6. 257-8897 [1] HOSE-MOLDED  
7. 329-9510 [1] TUBE AS  
8. 329-9511 [1] TUBE AS  
9. [2] PLUG AS  
    (EACH INCLUDES)
  9S-4183 [1] PLUG (1-1/16-12-THD)  
  3D-2824 [1] SEAL-O-RING  
10. 156-4283 [1] CONNECTOR AS  
  8T-7926 [1] CONNECTOR  
  6K-6307 [1] SEAL-O-RING  
  8T-0315 [1] SEAL-O-RING  
11. 2S-4078 [1] SEAL-O-RING  
12. 3J-1907 [1] SEAL-O-RING  
13. 3T-9549 [1] ADAPTER  
14. 4J-0524 [2] SEAL-O-RING  
15. 7X-2543 M [2] BOLT (M10X1.5X120-MM)  
16. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
17. 8T-4133 M [2] NUT (M10X1.5-THD)  
18. 8T-4183 M [8] BOLT (M12X1.75X40-MM)  
19. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
20. 8T-4223 [8] WASHER-HARD (13.5X25.5X3-MM THK)  
21. 8T-6703 [4] CLAMP-HOSE  
22. 8X-5489 [1] SLEEVE  
23. 9S-4191 [1] PLUG (9/16-18-THD)  
24. 122-6908 G HOSE-HYDRAULIC (8-IN)  
25. 9X-2023 E HOSE (31-CM)  
  E   ORDER BY THE CENTIMETER
  G   ORDER BY THE INCH
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP50330797
 

305-2892: FILTER & MTG GP-HYDRAULIC

305-2892 FILTER & MTG GP-HYDRAULIC
S/N R9L1-UP
PART OF 307-1473 SERVICE CENTER AR
Type 2
i07558511 SEBP5033
3052892 FILTER & MTG GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 160M 2 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-6703 [4] CLAMP-HOSE  
2. 391-7125 CY [1] SWITCH GP-BYPASS (FILTER)(HYDRAULIC OIL FILTER)  
3. 242-0407 [1] VALVE AS-DRAIN (HYDRAULIC FILTER)  
  214-7568 [1] SEAL-O-RING  
4. 245-7603 [1] TUBE AS  
5. 245-8964 [1] BLOCK  
6. 249-2307 Y [1] FILTER GP-OIL (HYDRAULIC TANK RETURN)  
7. 257-8897 [1] HOSE-MOLDED  
8. 329-9510 [1] TUBE AS  
9. 329-9511 [1] TUBE AS  
10. [2] PLUG AS  
    (EACH INCLUDES)
  9S-4183 [1] PLUG (1-1/16-12-THD)  
  3D-2824 [1] SEAL-O-RING  
11. 156-4283 [1] CONNECTOR AS  
  8T-7926 [1] CONNECTOR  
  6K-6307 [1] SEAL-O-RING  
  8T-0315 [1] SEAL-O-RING  
12. 9S-4191 [1] PLUG (9/16-18-THD)  
13. 3J-1907 [1] SEAL-O-RING  
14. 260-9151 C [1] PLUG AS  
  2S-4078 [1] SEAL-O-RING  
  3T-9549 [1] ADAPTER  
15. 4J-0524 [2] SEAL-O-RING  
16. 7X-2543 M [2] BOLT (M10X1.5X120-MM)  
17. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
18. 344-5675 CM [2] NUT (M10X1.5-THD)  
19. 8T-4183 M [8] BOLT (M12X1.75X40-MM)  
20. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
21. 8T-4223 [8] WASHER-HARD (13.5X25.5X3-MM THK)  
22. 8X-5489 [1] SLEEVE  
23. 122-6908 G HOSE-HYDRAULIC (7.1-IN)  
24. 9X-2023 E HOSE (31-CM)  
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  G   ORDER BY THE INCH
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP50330798
 

249-2307: FILTER GP-OIL

249-2307 FILTER GP-OIL
S/N R9L1-UP
INTERNAL BYPASS
PART OF 305-2892 FILTER & MTG GP-HYDRAULIC
i02909000 SEBP5033
2492307 FILTER GP-OIL Parts scheme
  For full view, you need register

Parts for your 160M 2 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 338-3540 [1] FILTER ELEMENT-OIL (ULTRA HIGH EFFICIENCY)(HYDRAULIC TANK)  
2. 321-5967 C [1] HOUSING GP-FILTER (OIL)  
  9S-8004 [1] PLUG (9/16-18-THD)  
  214-7568 [1] SEAL-O-RING  
3. 249-2308 Y [1] BASE GP-OIL FILTER (HYDRAULIC TANK RETURN)  
4. 214-7568 [1] SEAL-O-RING  
5. 6V-5048 [1] SEAL-O-RING  
6. 9S-4185 [1] PLUG (3/4-16-THD)  
7. 9S-4191 [1] PLUG (9/16-18-THD)  
8. 130-0229 [1] SEAL-O-RING  
   
  8L-2786 F [1] SEAL-O-RING  
  C   CHANGE FROM PREVIOUS TYPE
  F   NOT SHOWN
  Y   SEPARATE ILLUSTRATION
 

#SEBP50330799
 

327-5548: FILTER GP-OIL

327-5548 FILTER GP-OIL -HYDRAULIC
S/N R9L1-UP
PART OF 305-2919, 359-0812 LINES GP-PUMP
AN ATTACHMENT
i03946031 SEBP5033
3275548 FILTER GP-OIL Parts scheme
  For full view, you need register

Parts for your 160M 2 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9S-4191 [1] PLUG (9/16-18-THD)  
2. 1G-8878 [1] FILTER-OIL (ADVANCED EFFICIENCY)(HYDRAULIC)  
3. 253-2673 [1] SWITCH GP-PRESSURE (OIL FILTER BYPASS)  
3A. 3J-1907 [1] SEAL-O-RING  
3B. 5F-9144 [1] SEAL-O-RING  
3C. 102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
3D. 8T-8729 [2] PIN-CONNECTOR (16-GA TO 20-GA)  
3E. 9X-1813 E SLEEVE (14-CM)  
4. 3J-1907 [1] SEAL-O-RING  
5. 3J-7354 [1] SEAL-O-RING  
6. 9S-4182 [1] PLUG (7/16-20-THD)  
  E   ORDER BY THE CENTIMETER
 

Information:

Tool Operating Manual
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Reuse And Salvage Guidelines
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}

Caterpillar Parts SIS Catalog 160M 2 :

CYLINDER GP-SIDESHIFT
509-6993 CYLINDER GP-SIDESHIFT
CYLINDER GP-SIDESHIFT
249-4116 CYLINDER GP-SIDESHIFT
CYLINDER GP-SCARIFIER
165-2510 CYLINDER GP-SCARIFIER
CYLINDER GP-RIPPER
326-2227 CYLINDER GP-RIPPER
CYLINDER GP-LIFT
335-1974 CYLINDER GP-LIFT
CYLINDER GP-HYDRAULIC
277-3836 CYLINDER GP-HYDRAULIC
CYLINDER GP-CENTERSHIFT
262-1907 CYLINDER GP-CENTERSHIFT
CYLINDER GP-BLADE TIP
131-7191 CYLINDER GP-BLADE TIP
CYLINDER GP-STEERING
389-6062 CYLINDER GP-STEERING
CYLINDER GP-STEERING
389-6062 CYLINDER GP-STEERING
CYLINDER GP-WHEEL LEAN
249-5299 CYLINDER GP-WHEEL LEAN
DRIVE GP-CIRCLE
253-4677 DRIVE GP-CIRCLE
DRIVE GP-CIRCLE
423-9923 DRIVE GP-CIRCLE
FILTER & MTG GP-HYDRAULIC
305-2892 FILTER & MTG GP-HYDRAULIC
FILTER & MTG GP-HYDRAULIC
305-2892 FILTER & MTG GP-HYDRAULIC
FILTER GP-OIL
249-2307 FILTER GP-OIL

Truck sale:

Caterpillar 160M2, Construction
207,000 
Caterpillar 160M2, Construction
- motor graders
N C MACHINERY CO.
Caterpillar 160M2, Construction
173,900 
Caterpillar 160M2, Construction
- motor graders
N C MACHINERY CO.
Caterpillar 160M2, Construction
209,900 
Caterpillar 160M2, Construction
- motor graders
N C MACHINERY CO.
Caterpillar 160M2, Construction
204,900 
Caterpillar 160M2, Construction
- motor graders
N C MACHINERY CO.
Caterpillar 160M2, Construction
217,000 
Caterpillar 160M2, Construction
- motor graders
TRACTOR & EQUIPMENT CO.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.