AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

MODEL PA90VS WINCH /FOR D6R SERIES III A/ DJG00001-UP (MACHINE) HYDRAULIC SYSTEM Caterpillar SIS



TRACK-TYPE TRACTOR D6T TRACK-TYPE TRACTOR DJG
 MODEL PA90VS WINCH /FOR D6R SERIES III A/ DJG00001-UP (MACHINE) SEBP5034 D6T DJG   (2007)

Parts group D6T:

  For full view, you need register
HYDRAULIC SYSTEM
MOTOR GP
MOTOR GROUP
MOTOR GROUP
MOTOR GROUP

Information:

(For parts list, see above)

Special Instruction
Accumulator Discharging and Charging Procedures {0738, 4263, 4264, 4331, 5077, 5077, 5081, 7474}
Accumulator Discharging and Charging Procedures {0738, 4263, 4264, 4331, 5077, 5077, 5081, 7474}
Decommissioning Procedure for Permanently Sealed Diaphragm Accumulators {5077}
Decommissioning Procedure for Permanently Sealed Diaphragm Accumulators {5077}
Technical Information Bulletin
Updated Ride Control Accumulator Test and Charge Instructions{0738, 5004, 5077, 5081, 7474}
Updated Ride Control Accumulator Test and Charge Instructions{0738, 5004, 5077, 5081, 7474}
Tool Operating Manual
NEHS1214: 455-0126 Nitrogen Booster Pump Group {0374, 0599, 0647, 0756, 4263, 4331, 5077, 7200}
NEHS1214: 455-0126 Nitrogen Booster Pump Group {0374, 0599, 0647, 0756, 4263, 4331, 5077, 7200}
Systems Operation
Accumulator (Pilot)
D6T Track-Type Tractor Hydraulic System
Testing and Adjusting
Accumulator - Test
D6T Track-Type Tractor Power Train
Accumulator (Pilot) - Test and Charge
D6T Track-Type Tractor Hydraulic System
Service Magazine
Accumulator Recommendations for Certain Track-Type Tractors and Pipelayer Operating in Low Ambient Applications {3016, 5077}
2013/09/06
The Accumulator Discharging and Charging Procedures are Updated {5077}
The Accumulator Discharging and Charging Procedures are Updated {5077}
Technical Information Bulletin
Updated Ride Control Accumulator Test and Charge Instructions{0738, 5004, 5077, 5081, 7474}
Updated Ride Control Accumulator Test and Charge Instructions{0738, 5004, 5077, 5081, 7474}
Disassembly and Assembly
Cartridge Valve - Remove - Cartridge Valves In Chassis
D6T Track-Type Tractor Machine Systems
Cartridge Valve - Install - Cartridge Valves In Chassis
D6T Track-Type Tractor Machine Systems
Hydraulic Oil Cooler - Remove and Install
D6T Track-Type Tractor Machine Systems
Operation and Maintenance Manual
Lift Cylinder Yoke Bearings - Lubricate
D6T Track-Type Tractor
Special Instruction
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic System Modifications To Improve D6R Series III And D6T VPAT Pitch Link Pin And Angle Cylinder Service Life{5051, 5101}
Hydraulic System Modifications To Improve D6R Series III And D6T VPAT Pitch Link Pin And Angle Cylinder Service Life{5051, 5101}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Technical Information Bulletin
Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Specifications
Cylinder Mounting
D6T Track-Type Tractor Hydraulic System
Lift Cylinder (Bulldozer)
D6T Track-Type Tractor Hydraulic System
Angle Cylinder (Bulldozer)
D6T Track-Type Tractor Hydraulic System
Lift Cylinder (Ripper)
D6T Track-Type Tractor Hydraulic System
Tilt Cylinder (Bulldozer) - No Position Sensor
D6T Track-Type Tractor Hydraulic System
Tool Operating Manual
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Yoke Bearing Journals on Bulldozer Lift Cylinders for Track-Type Tractors and Wheel Dozers {6068, 7562}
Yoke Bearing Journals on Bulldozer Lift Cylinders for Track-Type Tractors and Wheel Dozers {6068, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Contamination Control Guidelines
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Disassembly and Assembly
Ripper Lift Cylinder - Remove and Install
D6T Track-Type Tractor Machine Systems
Bulldozer Lift Cylinder Mounts - Remove and Install
D6T Track-Type Tractor Machine Systems
Bulldozer Lift Cylinder (VPAT) - Remove and Install
D6T Track-Type Tractor Machine Systems
Bulldozer Angle Cylinder (VPAT) - Remove and Install
D6T Track-Type Tractor Machine Systems
Bulldozer Tilt Cylinder (VPAT) - Remove and Install
D6T Track-Type Tractor Machine Systems
Bulldozer Lift Cylinder - Remove and Install
D6T Track-Type Tractor Machine Systems
Bulldozer Tilt Cylinder - Remove and Install
D6T Track-Type Tractor Machine Systems
Service Magazine
Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2012/10/04
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
2009/01/05
An Improved Lift Cylinder Yoke is Now Used {7562}
2009/05/18
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30
New U-Cup Seal are Available with a Narrow Width to Service Cylinders in the Field {4303, 5101, 5102, 5104, 5456, 5457, 5458, 7562}
2010/12/24
Special Instructions for Hydraulic System Modifications to Improve D6R Series III and D6T VPAT Pitch Link Pin and Angle Cylinder Service Life Now Available {5051, 5101}
2012/09/10
Cat<SUP>&reg;</SUP> Reman Announces the Availability of Remanufactured Hydraulic Rods and Cylinders for Certain Cat Machines {7562}
2015/02/03
Operation and Maintenance Manual
Oil Filter - Inspect
D6T Track-Type Tractor
Hydraulic System Oil Filter - Replace
D6T Track-Type Tractor
Special Instruction
Guidelines for the Use of High Efficiency Filters for the Hydraulic Oil System and for the Power Train Oil System {3000, 3004, 5050, 5068}
Guidelines for the Use of High Efficiency Filters for the Hydraulic Oil System and for the Power Train Oil System {3000, 3004, 5050, 5068}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE FILTER HOUSING ON VARIOUS COMPACTORS, OFF-HIGHWAY TRUCKS, TRACK-TYPE TRACTORS, TRACK SKIDDERS, MOTOR GRADERS, WHEEL DOZERS, WHEEL LOADERS, AND WHEEL TRACTOR-SCRAPERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE FILTER HOUSING ON VARIOUS COMPACTORS, OFF-HIGHWAY TRUCKS, TRACK-TYPE TRACTORS, TRACK SKIDDERS, MOTOR GRADERS, WHEEL DOZERS, WHEEL LOADERS, AND WHEEL TRACTOR-SCRAPERS
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Specifications
Hydraulic Tank and Filter
D6T Track-Type Tractor Hydraulic System
Tool Operating Manual
Procedures for Using 9U-5971 and 173-9842 Filter Cart Group {0599, 0738, 5050, 5056, 5057, 5068, 5095, 7579}
Procedures for Using 9U-5971 and 173-9842 Filter Cart Group {0599, 0738, 5050, 5056, 5057, 5068, 5095, 7579}
188-3242 Filter Cart Group and 227-2479 Filter Cart Group{0374, 0599, 0680, 0738, 0768, 5050, 5056, 5095}
188-3242 Filter Cart Group and 227-2479 Filter Cart Group{0374, 0599, 0680, 0738, 0768, 5050, 5056, 5095}
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR REPLACING THE FILTER HOUSING ON VARIOUS COMPACTORS, OFF-HIGHWAY TRUCKS, TRACK-TYPE TRACTORS, TRACK SKIDDERS, MOTOR GRADERS, WHEEL DOZERS, WHEEL LOADERS, AND WHEEL TRACTOR-SCRAPERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE FILTER HOUSING ON VARIOUS COMPACTORS, OFF-HIGHWAY TRUCKS, TRACK-TYPE TRACTORS, TRACK SKIDDERS, MOTOR GRADERS, WHEEL DOZERS, WHEEL LOADERS, AND WHEEL TRACTOR-SCRAPERS
Service Letter-Asia
Systems Operation
Hydraulic Tank and Filter
D6T Track-Type Tractor Hydraulic System
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE FILTER HOUSING ON VARIOUS COMPACTORS, OFF-HIGHWAY TRUCKS, TRACK-TYPE TRACTORS, TRACK SKIDDERS, MOTOR GRADERS, WHEEL DOZERS, WHEEL LOADERS, AND WHEEL TRACTOR-SCRAPERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE FILTER HOUSING ON VARIOUS COMPACTORS, OFF-HIGHWAY TRUCKS, TRACK-TYPE TRACTORS, TRACK SKIDDERS, MOTOR GRADERS, WHEEL DOZERS, WHEEL LOADERS, AND WHEEL TRACTOR-SCRAPERS
Disassembly and Assembly
Hydraulic Oil Filter - Remove and Install
D6T Track-Type Tractor Machine Systems
Steering Oil Filter and Base - Remove
D6T Track-Type Tractor Machine Systems
Service Magazine
Optional High Efficiency Filters Are Now Available {3004, 5068}
2007/12/17
Improved Canister for the Filter Housing {3004, 3067, 5068, 5091, 5092, 5093}
2008/08/18
The Spacer for the Hydraulic Oil Filter May Need to be Updated on Certain Machines {5056, 5068}
2015/06/29
New Oil Filters for all Cat Machines are Available {3004, 3067, 4295, 431F, 5068}
New Oil Filters for all Cat Machines are Available {3004, 3067, 4295, 431F, 5068}
Systems Operation
Graphic Color Codes
D6T Track-Type Tractor Hydraulic System
Service Magazine
Updated Torque Value for the Magnetic Plug on Multiple Hydraulic Systems of Certain CAT Products {5050, 7000}
2011/10/20
Technical Information Bulletin
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Special Instruction
New Hose Couplings Are Now Used{0684, 5057, 5057, 7554}
New Hose Couplings Are Now Used{0684, 5057, 5057, 7554}
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
Technical Information Bulletin
The Flange Head on <NOBR>442-5593</NOBR> Coupling As May Have Been Manufactured Incorrectly {5057}
The Flange Head on 442-5593 Coupling As May Have Been Manufactured Incorrectly {5057}
Tool Operating Manual
358-4528 (380/480 V, 50/60 Hz, 3 Phase), 457-6040 (230V, 60 Hz, Single Phase) , 457-6039 (230V, 50 Hz, Single Phase) Hose Machine Group Set-Up and Operation{0599, 0684}
358-4528 (380/480 V, 50/60 Hz, 3 Phase), 457-6040 (230V, 60 Hz, Single Phase) , 457-6039 (230V, 50 Hz, Single Phase) Hose Machine Group Set-Up and Operation{0599, 0684}
Crimputer III Setup and Operation{0684, 5057}
Crimputer III Setup and Operation{0684, 5057}
Crimping Caterpillar 1E294, 1E716, 1E844 Hose and Couplings {0374, 0599, 0684, 0738, 5057}
Crimping Caterpillar 1E294, 1E716, 1E844 Hose and Couplings {0374, 0599, 0684, 0738, 5057}
Using the 209-3153 Portable Hose Machine {0374, 0599, 0684, 0738, 5057}
Using the 209-3153 Portable Hose Machine {0374, 0599, 0684, 0738, 5057}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Converting 137-7238 Hose Assembly Machines and 134-5640 Hose Assembly Machines (100 Ton) from Sony Control to Crimputer Control{0374, 0599, 0684, 5057}
Converting 137-7238 Hose Assembly Machines and 134-5640 Hose Assembly Machines (100 Ton) from Sony Control to Crimputer Control{0374, 0599, 0684, 5057}
Set up and Basic Operation of the 145-5161 Floor Model Hose Machine {0374, 0599, 0684, 0738, 5057}
Set up and Basic Operation of the 145-5161 Floor Model Hose Machine {0374, 0599, 0684, 0738, 5057}
Using the 9U-5792, 4C-5052, 4C-5054, 4C-3670, and 4C-3680 Hydraulic Hose Machines{0374, 0599, 0684, 0738, 5057}
Using the 9U-5792, 4C-5052, 4C-5054, 4C-3670, and 4C-3680 Hydraulic Hose Machines{0374, 0599, 0684, 0738, 5057}
243-0765 Bench Model Hose Machine For Use With the 242-3567 Variable Crimp Die Bowl{0374, 0599, 0684, 0738, 5057}
243-0765 Bench Model Hose Machine For Use With the 242-3567 Variable Crimp Die Bowl{0374, 0599, 0684, 0738, 5057}
Crimping Permanent Couplings Using the 136-3642 Crimp Tool Group in Combination and XT Hose Machines{0374, 0599, 0684, 5057}
Crimping Permanent Couplings Using the 136-3642 Crimp Tool Group in Combination and XT Hose Machines{0374, 0599, 0684, 5057}
Reuse And Salvage Guidelines
Crimputer III Setup and Operation{0684, 5057}
Crimputer III Setup and Operation{0684, 5057}
Contamination Control Guidelines
Hose Products Reference Guide {0374, 0599, 0684, 0738, 5057}
Hose Products Reference Guide {0374, 0599, 0684, 0738, 5057}
Service Magazine
Caterpillar Hose and Coupling Practices {0618, 1000, 5057, 7000}
2008/05/26
Special Instruction
Installation Of New Tilt Lines For D6R Series III And D6T Machines With A VPAT Blade{5057, 5104, 6060}
Installation Of New Tilt Lines For D6R Series III And D6T Machines With A VPAT Blade{5057, 5104, 6060}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR INSTALLING NEW HYDRAULIC TUBES AND HOSES FOR THE TILT FUNCTION OF THE VPAT BLADE ON CERTAIN D6R III AND D6T TRACK-TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR INSTALLING NEW HYDRAULIC TUBES AND HOSES FOR THE TILT FUNCTION OF THE VPAT BLADE ON CERTAIN D6R III AND D6T TRACK-TYPE TRACTORS
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-China
Service Letter-Asia
Service Letter-APD
Special Instruction
Installation Of New Tilt Lines For D6R Series III And D6T Machines With A VPAT Blade{5057, 5104, 6060}
Installation Of New Tilt Lines For D6R Series III And D6T Machines With A VPAT Blade{5057, 5104, 6060}
New Hose Couplings Are Now Used{0684, 5057, 5057, 7554}
New Hose Couplings Are Now Used{0684, 5057, 5057, 7554}
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR INSTALLING NEW HYDRAULIC TUBES AND HOSES FOR THE TILT FUNCTION OF THE VPAT BLADE ON CERTAIN D6R III AND D6T TRACK-TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR INSTALLING NEW HYDRAULIC TUBES AND HOSES FOR THE TILT FUNCTION OF THE VPAT BLADE ON CERTAIN D6R III AND D6T TRACK-TYPE TRACTORS
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Technical Information Bulletin
Some Hydraulic Couplings are Identified with an Incorrect Part Number{5057}
Some Hydraulic Couplings are Identified with an Incorrect Part Number{5057}
The Flange Head on <NOBR>442-5593</NOBR> Coupling As May Have Been Manufactured Incorrectly {5057}
The Flange Head on 442-5593 Coupling As May Have Been Manufactured Incorrectly {5057}
Tool Operating Manual
358-4528 (380/480 V, 50/60 Hz, 3 Phase), 457-6040 (230V, 60 Hz, Single Phase) , 457-6039 (230V, 50 Hz, Single Phase) Hose Machine Group Set-Up and Operation{0599, 0684}
358-4528 (380/480 V, 50/60 Hz, 3 Phase), 457-6040 (230V, 60 Hz, Single Phase) , 457-6039 (230V, 50 Hz, Single Phase) Hose Machine Group Set-Up and Operation{0599, 0684}
Crimputer III Setup and Operation{0684, 5057}
Crimputer III Setup and Operation{0684, 5057}
242-3567 Variable Crimp Die Bowl{0684}
242-3567 Variable Crimp Die Bowl{0684}
Crimping Caterpillar 1E294, 1E716, 1E844 Hose and Couplings {0374, 0599, 0684, 0738, 5057}
Crimping Caterpillar 1E294, 1E716, 1E844 Hose and Couplings {0374, 0599, 0684, 0738, 5057}
Using the 209-3153 Portable Hose Machine {0374, 0599, 0684, 0738, 5057}
Using the 209-3153 Portable Hose Machine {0374, 0599, 0684, 0738, 5057}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Converting 137-7238 Hose Assembly Machines and 134-5640 Hose Assembly Machines (100 Ton) from Sony Control to Crimputer Control{0374, 0599, 0684, 5057}
Converting 137-7238 Hose Assembly Machines and 134-5640 Hose Assembly Machines (100 Ton) from Sony Control to Crimputer Control{0374, 0599, 0684, 5057}
Set up and Basic Operation of the 145-5161 Floor Model Hose Machine {0374, 0599, 0684, 0738, 5057}
Set up and Basic Operation of the 145-5161 Floor Model Hose Machine {0374, 0599, 0684, 0738, 5057}
Using the 9U-5792, 4C-5052, 4C-5054, 4C-3670, and 4C-3680 Hydraulic Hose Machines{0374, 0599, 0684, 0738, 5057}
Using the 9U-5792, 4C-5052, 4C-5054, 4C-3670, and 4C-3680 Hydraulic Hose Machines{0374, 0599, 0684, 0738, 5057}
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR INSTALLING NEW HYDRAULIC TUBES AND HOSES FOR THE TILT FUNCTION OF THE VPAT BLADE ON CERTAIN D6R III AND D6T TRACK-TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR INSTALLING NEW HYDRAULIC TUBES AND HOSES FOR THE TILT FUNCTION OF THE VPAT BLADE ON CERTAIN D6R III AND D6T TRACK-TYPE TRACTORS
Service Letter-Asia
Reuse And Salvage Guidelines
Crimputer III Setup and Operation{0684, 5057}
Crimputer III Setup and Operation{0684, 5057}
Contamination Control Guidelines
Hose Products Reference Guide {0374, 0599, 0684, 0738, 5057}
Hose Products Reference Guide {0374, 0599, 0684, 0738, 5057}
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR INSTALLING NEW HYDRAULIC TUBES AND HOSES FOR THE TILT FUNCTION OF THE VPAT BLADE ON CERTAIN D6R III AND D6T TRACK-TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR INSTALLING NEW HYDRAULIC TUBES AND HOSES FOR THE TILT FUNCTION OF THE VPAT BLADE ON CERTAIN D6R III AND D6T TRACK-TYPE TRACTORS
Service Magazine
Caterpillar Hose and Coupling Practices {0618, 1000, 5057, 7000}
2008/05/26
Hydraulic Hose Suppression Sleeves for Certain Machines are Now Available {5057}
Hydraulic Hose Suppression Sleeves for Certain Machines are Now Available {5057}
Technical Information Bulletin
The Flange Head on <NOBR>442-5593</NOBR> Coupling As May Have Been Manufactured Incorrectly {5057}
The Flange Head on 442-5593 Coupling As May Have Been Manufactured Incorrectly {5057}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 191-5439 BREAKER RELIEF VALVE ON CERTAIN D6T, D6R SERIES III, D6G SERIES II, D6G, D7R SERIES II, D7G TRACK-TYPE TRACTORS AND 572R SERIES II PIPELAYERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 191-5439 BREAKER RELIEF VALVE ON CERTAIN D6T, D6R SERIES III, D6G SERIES II, D6G, D7R SERIES II, D7G TRACK-TYPE TRACTORS AND 572R SERIES II PIPELAYERS
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Technical Information Bulletin
The Flange Head on <NOBR>442-5593</NOBR> Coupling As May Have Been Manufactured Incorrectly {5057}
The Flange Head on 442-5593 Coupling As May Have Been Manufactured Incorrectly {5057}
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 191-5439 BREAKER RELIEF VALVE ON CERTAIN D6T, D6R SERIES III, D6G SERIES II, D6G, D7R SERIES II, D7G TRACK-TYPE TRACTORS AND 572R SERIES II PIPELAYERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 191-5439 BREAKER RELIEF VALVE ON CERTAIN D6T, D6R SERIES III, D6G SERIES II, D6G, D7R SERIES II, D7G TRACK-TYPE TRACTORS AND 572R SERIES II PIPELAYERS
Service Letter-Asia
Service Letter-APD
Special Instruction
Hydraulic System Modifications To Install A Ripper Anti-Drift Control Kit On Certain D6R Series III and D6T Track-Type Tractor {5050, 5057, 5352, 5356}
Hydraulic System Modifications To Install A Ripper Anti-Drift Control Kit On Certain D6R Series III and D6T Track-Type Tractor {5050, 5057, 5352, 5356}
Service Magazine
New Retrofit Kits are Available for Reducing Ripper Drift on Certain D6R Series III and D6T Track-Type Tractors {5050, 5057, 5352, 5356}
New Retrofit Kits are Available for Reducing Ripper Drift on Certain D6R Series III and D6T Track-Type Tractors {5050, 5057, 5352, 5356}
Special Instruction
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Tool Operating Manual
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Reuse And Salvage Guidelines
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Hydraulic Piston Motors{5058}
Hydraulic Piston Motors{5058}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
Bench Test Procedures
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Service Magazine
An Improved Lift Cylinder Yoke is Now Used {7562}
2009/05/18
Special Instruction
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Repair Process for Hydraulic Gear Pumps {5073}
Repair Process for Hydraulic Gear Pumps {5073}
Vane Type Hydraulic Pump Identification Guidelines {5055}
Vane Type Hydraulic Pump Identification Guidelines {5055}
Specifications
Piston Pump (Implement)
D6T Track-Type Tractor Hydraulic System
Piston Pump (Steering)
D6T Track-Type Tractor Hydraulic System
Piston Pump (Implement)
D6T Track-Type Tractor Hydraulic System
Piston Pump (Implement)
D6T Track-Type Tractor Hydraulic System
Tool Operating Manual
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Systems Operation
Piston Pump (Implement)
D6T Track-Type Tractor Hydraulic System
Reuse And Salvage Guidelines
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Vane Type Hydraulic Pumps {5055}
Vane Type Hydraulic Pumps {5055}
Repair Process for Hydraulic Gear Pumps {5073}
Repair Process for Hydraulic Gear Pumps {5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Vane Type Hydraulic Pump Identification Guidelines {5055}
Vane Type Hydraulic Pump Identification Guidelines {5055}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
Thermal Spray Procedures for Tyrone Drive Shaft (Pump Gear){0679, 3066, 5073}
Thermal Spray Procedures for Tyrone Drive Shaft (Pump Gear){0679, 3066, 5073}
Testing and Adjusting
Piston Pump (Implement) - Test and Adjust
D6T Track-Type Tractor Hydraulic System
Piston Pump (Steering) - Test and Adjust
D6T Track-Type Tractor Hydraulic System
Bench Test Procedures
Bench Test Procedure for Hydraulic Piston Pumps {3203, 5070}
Bench Test Procedure for Hydraulic Piston Pumps {3203, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Bench Test Procedure for Gear Pumps {5073}
Bench Test Procedure for Gear Pumps {5073}
Bench Test Procedure for Vane Pumps {5055}
Bench Test Procedure for Vane Pumps {5055}
Bench Test Procedure for Hydraulic Piston Pumps {5070}
Bench Test Procedure for Hydraulic Piston Pumps {5070}
Disassembly and Assembly
Piston Pump (Implement) - Remove
D6T Track-Type Tractor Machine Systems
Piston Pump (Implement) - Install
D6T Track-Type Tractor Machine Systems
Piston Pump (Implement) - Disassemble
D6T Track-Type Tractor Machine Systems
Piston Pump (Implement) - Assemble
D6T Track-Type Tractor Machine Systems
Service Magazine
A New Implement Piston Pump Is Now Used on Certain D6T Track-Type Tractors {5050, 5070, 5084}
2012/11/19
New Metering Pump Groups For Steering Control Prevent Oil Leaks {4300, 4301, 4312}
2010/01/27
Systems Operation
Signal Resolver Network
D6T Track-Type Tractor Hydraulic System
Testing and Adjusting
Resolver Network - Test
D6T Track-Type Tractor Hydraulic System
Reuse And Salvage Guidelines
Final Drive Steering System, Wheel Braking System, and Wheels & Tires Salvage and Reuse Manual Contents {4000, 4050, 4100, 4250, 4300}
Final Drive Steering System, Wheel Braking System, and Wheels & Tires Salvage and Reuse Manual Contents {4000, 4050, 4100, 4250, 4300}
Operation and Maintenance Manual
Hydraulic System Oil Level - Check
D6T Track-Type Tractor
Specifications
Hydraulic Tank and Filter
D6T Track-Type Tractor Hydraulic System
Tool Operating Manual
204-7392 (Air Motor Driven) Filter Cart {0645, 0680, 0738, 5056, 5068}
204-7392 (Air Motor Driven) Filter Cart {0645, 0680, 0738, 5056, 5068}
Procedures for Using 9U-5971 and 173-9842 Filter Cart Group {0599, 0738, 5050, 5056, 5057, 5068, 5095, 7579}
Procedures for Using 9U-5971 and 173-9842 Filter Cart Group {0599, 0738, 5050, 5056, 5057, 5068, 5095, 7579}
Procedures For Using: 127-8781 Transfer Filter Cart , old 9U-7361 (110V, 60 hz), 169-7159 Transfer Filter Cart , old 127-8782 (220V, 50 hz) CE, 174-9158 Transfer Filter Cart , old 129-0849 (Air Motor Driven){0374, 0599, 0680, 0738}
Procedures For Using: 127-8781 Transfer Filter Cart , old 9U-7361 (110V, 60 hz), 169-7159 Transfer Filter Cart , old 127-8782 (220V, 50 hz) CE, 174-9158 Transfer Filter Cart , old 129-0849 (Air Motor Driven){0374, 0599, 0680, 0738}
Procedure for Using 173-8839 Fluid Storage Filter Cart {0113, 0374, 0599, 0680, 0738, 7579}
Procedure for Using 173-8839 Fluid Storage Filter Cart {0113, 0374, 0599, 0680, 0738, 7579}
188-3242 Filter Cart Group and 227-2479 Filter Cart Group{0374, 0599, 0680, 0738, 0768, 5050, 5056, 5095}
188-3242 Filter Cart Group and 227-2479 Filter Cart Group{0374, 0599, 0680, 0738, 0768, 5050, 5056, 5095}
Systems Operation
Hydraulic Tank and Filter
D6T Track-Type Tractor Hydraulic System
Reuse And Salvage Guidelines
Filtration Procedure for Hydraulic Oil in Track-Type Tractors & Pipelayers {0680, 0768, 5050, 5056, 5095}
Filtration Procedure for Hydraulic Oil in Track-Type Tractors & Pipelayers {0680, 0768, 5050, 5056, 5095}
Filtration Procedure for Transmission Oil in D5-D11 Track-Type Tractor {0680, 0738, 0768, 5050, 5056, 5095}
Filtration Procedure for Transmission Oil in D5-D11 Track-Type Tractor {0680, 0738, 0768, 5050, 5056, 5095}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Contamination Control Guidelines
Procedure for Filtering <NOBR> 9U-5000</NOBR> Hydraulic Test Bench Hydraulic Oil {0680, 0738, 0768, 0784, 5050, 5056}
Procedure for Filtering 9U-5000 Hydraulic Test Bench Hydraulic Oil {0680, 0738, 0768, 0784, 5050, 5056}
Filtration Procedure for Excavator Hydraulic Oil {0680, 0768, 5050, 5056}
Filtration Procedure for Excavator Hydraulic Oil {0680, 0768, 5050, 5056}
Filtration Procedure for Hydraulic Oil in Track-Type Tractors & Pipelayers {0680, 0768, 5050, 5056, 5095}
Filtration Procedure for Hydraulic Oil in Track-Type Tractors & Pipelayers {0680, 0768, 5050, 5056, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Filtration Procedure for Transmission Oil in D5-D11 Track-Type Tractor {0680, 0738, 0768, 5050, 5056, 5095}
Filtration Procedure for Transmission Oil in D5-D11 Track-Type Tractor {0680, 0738, 0768, 5050, 5056, 5095}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Basic Principles of Kidney Loop Filtering Hydraulic Fluid Systems {0680, 0768, 5050, 5056}
Basic Principles of Kidney Loop Filtering Hydraulic Fluid Systems {0680, 0768, 5050, 5056}
Disassembly and Assembly
Hydraulic Tank - Remove
D6T Track-Type Tractor Machine Systems
Hydraulic Tank - Install
D6T Track-Type Tractor Machine Systems
Hydraulic Tank - Assemble
D6T Track-Type Tractor Machine Systems
Hydraulic Tank - Disassemble
D6T Track-Type Tractor Machine Systems
Service Magazine
A New Strainer Assembly For the Hydraulic Tank Is Now Available {5056, 5068}
2013/09/02
The Spacer for the Hydraulic Oil Filter May Need to be Updated on Certain Machines {5056, 5068}
2015/06/29
Truck Engine News
Changes to the Usage and Cleaning of the Contamination Monitor Group {0784, 5050}
2010/10/01
Engine News
Changes to the Usage and Cleaning of the Contamination Monitor Group {0784, 5050}
2010/09/10
Special Instruction
Operating Instructions for Cat 1U-9400 Series Hydraulic Test Center {0784}
Operating Instructions for Cat 1U-9400 Series Hydraulic Test Center {0784}
Accumulator Discharging and Charging Procedures {0738, 4263, 4264, 4331, 5077, 5077, 5081, 7474}
Accumulator Discharging and Charging Procedures {0738, 4263, 4264, 4331, 5077, 5077, 5081, 7474}
Lip Type Seals {0599, 0733, 5050, 7555}
Lip Type Seals {0599, 0733, 5050, 7555}
Hose Inspection Form {0374, 0599, 5057, 5057}
Hose Inspection Form {0374, 0599, 5057, 5057}
Technical Information Bulletin
Updated Ride Control Accumulator Test and Charge Instructions{0738, 5004, 5077, 5081, 7474}
Updated Ride Control Accumulator Test and Charge Instructions{0738, 5004, 5077, 5081, 7474}
Tool Operating Manual
358-4528 (380/480 V, 50/60 Hz, 3 Phase), 457-6040 (230V, 60 Hz, Single Phase) , 457-6039 (230V, 50 Hz, Single Phase) Hose Machine Group Set-Up and Operation{0599, 0684}
358-4528 (380/480 V, 50/60 Hz, 3 Phase), 457-6040 (230V, 60 Hz, Single Phase) , 457-6039 (230V, 50 Hz, Single Phase) Hose Machine Group Set-Up and Operation{0599, 0684}
Crimputer III Setup and Operation{0684, 5057}
Crimputer III Setup and Operation{0684, 5057}
242-3567 Variable Crimp Die Bowl{0684}
242-3567 Variable Crimp Die Bowl{0684}
Using the 198-4240 Digital Pressure Indicator Group{0599, 0738, 0788, 1000, 3000, 4000, 5000, 6000}
Using the 198-4240 Digital Pressure Indicator Group{0599, 0738, 0788, 1000, 3000, 4000, 5000, 6000}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Crimping Caterpillar 1E294, 1E716, 1E844 Hose and Couplings {0374, 0599, 0684, 0738, 5057}
Crimping Caterpillar 1E294, 1E716, 1E844 Hose and Couplings {0374, 0599, 0684, 0738, 5057}
Using the 209-3153 Portable Hose Machine {0374, 0599, 0684, 0738, 5057}
Using the 209-3153 Portable Hose Machine {0374, 0599, 0684, 0738, 5057}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Base-Mounted Recirculating Parts Washers{0374, 0599, 0680, 0699, 0700}
Base-Mounted Recirculating Parts Washers{0374, 0599, 0680, 0699, 0700}
204-7392 (Air Motor Driven) Filter Cart {0645, 0680, 0738, 5056, 5068}
204-7392 (Air Motor Driven) Filter Cart {0645, 0680, 0738, 5056, 5068}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
9U-5000 Series Hydraulic Test Bench {0599, 0738}
9U-5000 Series Hydraulic Test Bench {0599, 0738}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9437 Portable Hydraulic Tester , 1U-8761 Portable Hydraulic Tester (Canceled), 4C-9675 Portable Hydraulic Tester , 1U-9951 Portable Hydraulic Tester (Canceled){0599, 0738}
4C-9437 Portable Hydraulic Tester , 1U-8761 Portable Hydraulic Tester (Canceled), 4C-9675 Portable Hydraulic Tester , 1U-9951 Portable Hydraulic Tester (Canceled){0599, 0738}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using 9U-5971 and 173-9842 Filter Cart Group {0599, 0738, 5050, 5056, 5057, 5068, 5095, 7579}
Procedures for Using 9U-5971 and 173-9842 Filter Cart Group {0599, 0738, 5050, 5056, 5057, 5068, 5095, 7579}
Procedures For Using: 127-8781 Transfer Filter Cart , old 9U-7361 (110V, 60 hz), 169-7159 Transfer Filter Cart , old 127-8782 (220V, 50 hz) CE, 174-9158 Transfer Filter Cart , old 129-0849 (Air Motor Driven){0374, 0599, 0680, 0738}
Procedures For Using: 127-8781 Transfer Filter Cart , old 9U-7361 (110V, 60 hz), 169-7159 Transfer Filter Cart , old 127-8782 (220V, 50 hz) CE, 174-9158 Transfer Filter Cart , old 129-0849 (Air Motor Driven){0374, 0599, 0680, 0738}
Procedure for Using 173-8839 Fluid Storage Filter Cart {0113, 0374, 0599, 0680, 0738, 7579}
Procedure for Using 173-8839 Fluid Storage Filter Cart {0113, 0374, 0599, 0680, 0738, 7579}
Converting 137-7238 Hose Assembly Machines and 134-5640 Hose Assembly Machines (100 Ton) from Sony Control to Crimputer Control{0374, 0599, 0684, 5057}
Converting 137-7238 Hose Assembly Machines and 134-5640 Hose Assembly Machines (100 Ton) from Sony Control to Crimputer Control{0374, 0599, 0684, 5057}
146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738}
146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738}
TT5000 to TT7000 Torque Turn Wrench Conversion{0374, 0599, 0602, 0677, 79NY}
TT5000 to TT7000 Torque Turn Wrench Conversion{0374, 0599, 0602, 0677, 79NY}
Set up and Basic Operation of the 145-5161 Floor Model Hose Machine {0374, 0599, 0684, 0738, 5057}
Set up and Basic Operation of the 145-5161 Floor Model Hose Machine {0374, 0599, 0684, 0738, 5057}
Using the 164-2691 Printer Group {0374, 0599, 0684, 5057}
Using the 164-2691 Printer Group {0374, 0599, 0684, 5057}
420-2048 Adjustable C-Frame Assembly{0629, 0632, 0738, 4000, 5050, 7000}
420-2048 Adjustable C-Frame Assembly{0629, 0632, 0738, 4000, 5050, 7000}
HVOF Identifier 396-9342 Group{0599, 0669, 0679, 7000}
HVOF Identifier 396-9342 Group{0599, 0669, 0679, 7000}
4-Inch Radial Hose Machine{0374, 0599, 0684, 0738, 5057}
4-Inch Radial Hose Machine{0374, 0599, 0684, 0738, 5057}
188-3242 Filter Cart Group and 227-2479 Filter Cart Group{0374, 0599, 0680, 0738, 0768, 5050, 5056, 5095}
188-3242 Filter Cart Group and 227-2479 Filter Cart Group{0374, 0599, 0680, 0738, 0768, 5050, 5056, 5095}
Procedures for Using the 212-1503 Portable Parts Washer{0374, 0599, 0680, 0699, 0700}
Procedures for Using the 212-1503 Portable Parts Washer{0374, 0599, 0680, 0699, 0700}
Using the 9U-5792, 4C-5052, 4C-5054, 4C-3670, and 4C-3680 Hydraulic Hose Machines{0374, 0599, 0684, 0738, 5057}
Using the 9U-5792, 4C-5052, 4C-5054, 4C-3670, and 4C-3680 Hydraulic Hose Machines{0374, 0599, 0684, 0738, 5057}
Using the 223-2105 Hose Cutting Machine{0374, 0599, 0678, 0684, 0708, 0738, 5057, 6060}
Using the 223-2105 Hose Cutting Machine{0374, 0599, 0678, 0684, 0708, 0738, 5057, 6060}
Crimping XT-3 ES and XT-5 S4G, MCSH, and MCSX Couplings Using 4C-3660, 4C-5052, 4C-5053, 9U-5792, or 9U-7261 Hose Machines{0374, 0599, 0684, 0738, 5057}
Crimping XT-3 ES and XT-5 S4G, MCSH, and MCSX Couplings Using 4C-3660, 4C-5052, 4C-5053, 9U-5792, or 9U-7261 Hose Machines{0374, 0599, 0684, 0738, 5057}
243-0765 Bench Model Hose Machine For Use With the 242-3567 Variable Crimp Die Bowl{0374, 0599, 0684, 0738, 5057}
243-0765 Bench Model Hose Machine For Use With the 242-3567 Variable Crimp Die Bowl{0374, 0599, 0684, 0738, 5057}
Crimping Permanent Couplings Using the 136-3642 Crimp Tool Group in Combination and XT Hose Machines{0374, 0599, 0684, 5057}
Crimping Permanent Couplings Using the 136-3642 Crimp Tool Group in Combination and XT Hose Machines{0374, 0599, 0684, 5057}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Installing 457-6030 (C3-290 Controller) on Hose Crimping Machines 233-8048, 286-4354, 286-4355, 275-6199, 286-4353, and 233-8038{0374, 0599, 0684, 0700, 0738, 5057}
Installing 457-6030 (C3-290 Controller) on Hose Crimping Machines 233-8048, 286-4354, 286-4355, 275-6199, 286-4353, and 233-8038{0374, 0599, 0684, 0700, 0738, 5057}
NEHS1214: 455-0126 Nitrogen Booster Pump Group {0374, 0599, 0647, 0756, 4263, 4331, 5077, 7200}
NEHS1214: 455-0126 Nitrogen Booster Pump Group {0374, 0599, 0647, 0756, 4263, 4331, 5077, 7200}
Base Mounted Recirculating Parts Washers {0374, 0599, 0680, 0699, 0700}
Base Mounted Recirculating Parts Washers {0374, 0599, 0680, 0699, 0700}
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Filtration Procedure for Hydraulic Oil in Track-Type Tractors & Pipelayers {0680, 0768, 5050, 5056, 5095}
Filtration Procedure for Hydraulic Oil in Track-Type Tractors & Pipelayers {0680, 0768, 5050, 5056, 5095}
Filtration Procedure for Transmission Oil in D5-D11 Track-Type Tractor {0680, 0738, 0768, 5050, 5056, 5095}
Filtration Procedure for Transmission Oil in D5-D11 Track-Type Tractor {0680, 0738, 0768, 5050, 5056, 5095}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Crimputer III Setup and Operation{0684, 5057}
Crimputer III Setup and Operation{0684, 5057}
Contamination Control Guidelines
Procedure for Filtering <NOBR> 9U-5000</NOBR> Hydraulic Test Bench Hydraulic Oil {0680, 0738, 0768, 0784, 5050, 5056}
Procedure for Filtering 9U-5000 Hydraulic Test Bench Hydraulic Oil {0680, 0738, 0768, 0784, 5050, 5056}
Filtration Procedure for Excavator Hydraulic Oil {0680, 0768, 5050, 5056}
Filtration Procedure for Excavator Hydraulic Oil {0680, 0768, 5050, 5056}
Filtration Procedure for Hydraulic Oil in Track-Type Tractors & Pipelayers {0680, 0768, 5050, 5056, 5095}
Filtration Procedure for Hydraulic Oil in Track-Type Tractors & Pipelayers {0680, 0768, 5050, 5056, 5095}
Procedure for Operating Caterpillar Filter Carts {0680, 0768, 5050}
Procedure for Operating Caterpillar Filter Carts {0680, 0768, 5050}
Filtration Procedure for Transmission Oil in D5-D11 Track-Type Tractor {0680, 0738, 0768, 5050, 5056, 5095}
Filtration Procedure for Transmission Oil in D5-D11 Track-Type Tractor {0680, 0738, 0768, 5050, 5056, 5095}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Hose Products Reference Guide {0374, 0599, 0684, 0738, 5057}
Hose Products Reference Guide {0374, 0599, 0684, 0738, 5057}
Basic Principles of Kidney Loop Filtering Hydraulic Fluid Systems {0680, 0768, 5050, 5056}
Basic Principles of Kidney Loop Filtering Hydraulic Fluid Systems {0680, 0768, 5050, 5056}
Bench Test Procedures
Required Tooling for Bench Testing Hydraulic Components {0784, 4000, 4005, 4129, 4250, 4300, 5050}
Required Tooling for Bench Testing Hydraulic Components {0784, 4000, 4005, 4129, 4250, 4300, 5050}
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Systems Operation
Hydraulic Tank and Filter
D6T Track-Type Tractor Hydraulic System
Testing and Adjusting
Pressure Reducing Valve - Test and Adjust
D6T Track-Type Tractor Hydraulic System
Resolver Network - Test
D6T Track-Type Tractor Hydraulic System
Bank Valve (Grade Control) - Calibrate
AccuGrade® - CD700 Grade Control System (GPS/ATS/Laser)
Bank Valve (Grade Control) - Calibrate
AccuGrade® GPS v11 for CD700
Troubleshooting
Hydraulic System
AccuGrade® - CD700 Grade Control System (GPS/ATS/Laser)
Hydraulic System
AccuGrade® GPS v11 for CD700
Service Magazine
Improved Mounting of the Hydraulic Stack Valve {5051}
2008/08/04
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 191-5439 BREAKER RELIEF VALVE ON CERTAIN D6T, D6R SERIES III, D6G SERIES II, D6G, D7R SERIES II, D7G TRACK-TYPE TRACTORS AND 572R SERIES II PIPELAYERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 191-5439 BREAKER RELIEF VALVE ON CERTAIN D6T, D6R SERIES III, D6G SERIES II, D6G, D7R SERIES II, D7G TRACK-TYPE TRACTORS AND 572R SERIES II PIPELAYERS
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-China
Service Letter-Asia
Service Letter-APD
Specifications
Bypass Valve (Hydraulic Oil Cooler)
D6T Track-Type Tractor Hydraulic System
Systems Operation
Bypass Valve (Hydraulic Oil Cooler)
D6T Track-Type Tractor Hydraulic System
Special Instruction
Hydraulic System Modifications To Improve D6R Series III And D6T VPAT Pitch Link Pin And Angle Cylinder Service Life{5051, 5101}
Hydraulic System Modifications To Improve D6R Series III And D6T VPAT Pitch Link Pin And Angle Cylinder Service Life{5051, 5101}
Technical Information Bulletin
New Torque Specification for the Orifice Plug in the Implement Control Valve{5051}
New Torque Specification for the Orifice Plug in the Implement Control Valve{5051}
Specifications
Control Valve (Bulldozer Lift)
D6T Track-Type Tractor Hydraulic System
Control Valve (Bulldozer Tilt) - PAT Blade
D6T Track-Type Tractor Hydraulic System
Control Valve (Bulldozer Tilt) - Standard
D6T Track-Type Tractor Hydraulic System
Control Valve (Ripper)
D6T Track-Type Tractor Hydraulic System
Tool Operating Manual
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Systems Operation
Control Valve (Implement)
D6T Track-Type Tractor Hydraulic System
Signal Resolver Network
D6T Track-Type Tractor Hydraulic System
Testing and Adjusting
Counterbalance Valve (Grade Control) - Test and Adjust
AccuGrade® - CD700 Grade Control System (GPS/ATS/Laser)
Bank Valve (Grade Control) - Calibrate
AccuGrade® - CD700 Grade Control System (GPS/ATS/Laser)
Pressure Limiter Valve - Test
D6T Track-Type Tractor Hydraulic System
Bank Valve (Grade Control) - Calibrate
AccuGrade® GPS v11 for CD700
Counterbalance Valve (Grade Control) - Test and Adjust
AccuGrade® GPS v11 for CD700
Troubleshooting
MID 113 - CID 0497 - FMI 03
D6R Series III, D6T and D7R Series II Track-Type Tractors
MID 113 - CID 0497 - FMI 05
D6R Series III, D6T and D7R Series II Track-Type Tractors
MID 113 - CID 0497 - FMI 06
D6R Series III, D6T and D7R Series II Track-Type Tractors
MID 113 - CID 0497 - FMI 13
D6R Series III, D6T and D7R Series II Track-Type Tractors
MID 113 - CID 0498 - FMI 03
D6R Series III, D6T and D7R Series II Track-Type Tractors
MID 113 - CID 0498 - FMI 05
D6R Series III, D6T and D7R Series II Track-Type Tractors
MID 113 - CID 0498 - FMI 06
D6R Series III, D6T and D7R Series II Track-Type Tractors
MID 113 - CID 0498 - FMI 13
D6R Series III, D6T and D7R Series II Track-Type Tractors
Hydraulic System
AccuGrade® - CD700 Grade Control System (GPS/ATS/Laser)
MID 114 - CID 0497 - FMI 03
AccuGrade® - CD700 Grade Control System (GPS/ATS/Laser)
MID 114 - CID 0497 - FMI 05
AccuGrade® - CD700 Grade Control System (GPS/ATS/Laser)
MID 114 - CID 0497 - FMI 06
AccuGrade® - CD700 Grade Control System (GPS/ATS/Laser)
MID 114 - CID 0498 - FMI 03
AccuGrade® - CD700 Grade Control System (GPS/ATS/Laser)
MID 114 - CID 0498 - FMI 05
AccuGrade® - CD700 Grade Control System (GPS/ATS/Laser)
MID 114 - CID 0498 - FMI 06
AccuGrade® - CD700 Grade Control System (GPS/ATS/Laser)
MID 114 - CID 1197 - FMI 03
AccuGrade® - CD700 Grade Control System (GPS/ATS/Laser)
MID 114 - CID 1197 - FMI 05
AccuGrade® - CD700 Grade Control System (GPS/ATS/Laser)
MID 114 - CID 1197 - FMI 06
AccuGrade® - CD700 Grade Control System (GPS/ATS/Laser)
MID 114 - CID 1198 - FMI 03
AccuGrade® - CD700 Grade Control System (GPS/ATS/Laser)
MID 114 - CID 1198 - FMI 05
AccuGrade® - CD700 Grade Control System (GPS/ATS/Laser)
MID 114 - CID 1198 - FMI 06
AccuGrade® - CD700 Grade Control System (GPS/ATS/Laser)
MID 114 - CID 2235 - FMI 03
AccuGrade® - CD700 Grade Control System (GPS/ATS/Laser)
MID 114 - CID 2235 - FMI 05
AccuGrade® - CD700 Grade Control System (GPS/ATS/Laser)
MID 114 - CID 2235 - FMI 06
AccuGrade® - CD700 Grade Control System (GPS/ATS/Laser)
MID 114 - CID 2324 - FMI 03
AccuGrade® - CD700 Grade Control System (GPS/ATS/Laser)
MID 114 - CID 2324 - FMI 05
AccuGrade® - CD700 Grade Control System (GPS/ATS/Laser)
MID 114 - CID 2324 - FMI 06
AccuGrade® - CD700 Grade Control System (GPS/ATS/Laser)
MID 114 - CID 0498 - FMI 06
AccuGrade® GPS v11 for CD700
MID 114 - CID 1197 - FMI 03
AccuGrade® GPS v11 for CD700
MID 114 - CID 1197 - FMI 05
AccuGrade® GPS v11 for CD700
MID 114 - CID 1198 - FMI 05
AccuGrade® GPS v11 for CD700
MID 114 - CID 0498 - FMI 05
AccuGrade® GPS v11 for CD700
MID 114 - CID 0497 - FMI 05
AccuGrade® GPS v11 for CD700
MID 114 - CID 0497 - FMI 06
AccuGrade® GPS v11 for CD700
MID 114 - CID 1198 - FMI 03
AccuGrade® GPS v11 for CD700
MID 114 - CID 0497 - FMI 03
AccuGrade® GPS v11 for CD700
MID 114 - CID 2324 - FMI 06
AccuGrade® GPS v11 for CD700
MID 114 - CID 2235 - FMI 06
AccuGrade® GPS v11 for CD700
MID 114 - CID 2324 - FMI 05
AccuGrade® GPS v11 for CD700
MID 114 - CID 2235 - FMI 05
AccuGrade® GPS v11 for CD700
MID 114 - CID 2324 - FMI 03
AccuGrade® GPS v11 for CD700
Hydraulic System
AccuGrade® GPS v11 for CD700
MID 114 - CID 1198 - FMI 06
AccuGrade® GPS v11 for CD700
MID 114 - CID 2235 - FMI 03
AccuGrade® GPS v11 for CD700
MID 114 - CID 1197 - FMI 06
AccuGrade® GPS v11 for CD700
MID 114 - CID 0498 - FMI 03
AccuGrade® GPS v11 for CD700
MID 114 - CID 0498 - FMI 03
AccuGrade® GPS v11 for CD700
Disassembly and Assembly
Pilot Valve (Steering) - Remove
D6T Track-Type Tractor Machine Systems
Hydraulic Control Valve - Remove
D6T Track-Type Tractor Machine Systems
Hydraulic Control Valve - Install
D6T Track-Type Tractor Machine Systems
Hydraulic Control Valve - Disassemble
D6T Track-Type Tractor Machine Systems
Hydraulic Control Valve - Assemble
D6T Track-Type Tractor Machine Systems
Service Magazine
Improved Mounting of the Hydraulic Stack Valve {5051}
2008/08/04
Special Instructions for Hydraulic System Modifications to Improve D6R Series III and D6T VPAT Pitch Link Pin and Angle Cylinder Service Life Now Available {5051, 5101}
2012/09/10
Testing and Adjusting
Counterbalance Valve (Grade Control) - Test and Adjust
AccuGrade® - CD700 Grade Control System (GPS/ATS/Laser)
Counterbalance Valve (Grade Control) - Test and Adjust
AccuGrade® GPS v11 for CD700
Contamination Control Guidelines
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE IMPLEMENT VALVE MOUNTING BOLTS ON CERTAIN D7R SERIES II, D6R SERIES III, AND D6T TRACK-TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE IMPLEMENT VALVE MOUNTING BOLTS ON CERTAIN D7R SERIES II, D6R SERIES III, AND D6T TRACK-TYPE TRACTORS
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Specifications
Control Valve (Implement)
D6T Track-Type Tractor Hydraulic System
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR REPLACING THE IMPLEMENT VALVE MOUNTING BOLTS ON CERTAIN D7R SERIES II, D6R SERIES III, AND D6T TRACK-TYPE TRACTORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE IMPLEMENT VALVE MOUNTING BOLTS ON CERTAIN D7R SERIES II, D6R SERIES III, AND D6T TRACK-TYPE TRACTORS
Service Letter-Asia
Service Letter-APD
Testing and Adjusting
Pressure Limiter Valve - Test
D6T Track-Type Tractor Hydraulic System
Service Magazine
New Torque Specifications for the Orifice Plug in the Implement Control Valve {5051}
2007/05/14
New Torque Specifications for the Orifice Plug in the Implement Control Valve {5051}
2011/05/05
Systems Operation
Pressure Reducing Valve (Pilot Oil)
D6T Track-Type Tractor Hydraulic System
Testing and Adjusting
Pilot Control Valve (Steering) - Test and Adjust
D6T Track-Type Tractor Hydraulic System
Disassembly and Assembly
Pilot Valve (Steering) - Disassemble
D6T Track-Type Tractor Machine Systems
Pilot Valve (Steering) - Assemble
D6T Track-Type Tractor Machine Systems
Pilot Valve (Steering) - Remove
D6T Track-Type Tractor Machine Systems
Pilot Valve (Steering) - Install
D6T Track-Type Tractor Machine Systems
Specifications
Pressure Reducing Valve (Pilot)
D6T Track-Type Tractor Hydraulic System
Systems Operation
Pressure Reducing Valve (Pilot Oil)
D6T Track-Type Tractor Hydraulic System
Testing and Adjusting
Pressure Reducing Valve - Test and Adjust
D6T Track-Type Tractor Hydraulic System
Specifications
Quick-Drop Valve
D6T Track-Type Tractor Hydraulic System
Systems Operation
Quick-Drop Valve
D6T Track-Type Tractor Hydraulic System
Disassembly and Assembly
Quick-Drop Valve - Remove
D6T Track-Type Tractor Machine Systems
Quick-Drop Valve - Disassemble
D6T Track-Type Tractor Machine Systems
Quick-Drop Valve - Assemble
D6T Track-Type Tractor Machine Systems
Quick-Drop Valve - Install
D6T Track-Type Tractor Machine Systems
Service Magazine
A New Orifice Sleeve In the Quick-Drop Valve Provides Better Control of the Blade Lower Operation {5110}
2010/03/29
A Quick Drop Kit To Improve Controllability Of The Blade Lower Operation Is Now Available For Certain D6T Track-Type Tractors {5110}
2015/09/16
Specifications
Relief Valve (Main)
D6T Track-Type Tractor Hydraulic System
Relief Valve (Main) - PAT Blade
D6T Track-Type Tractor Hydraulic System
Tool Operating Manual
Repairing Line Relief Valve Seats in Hydraulic Control Valves Using the 229-3612 Hydraulic Valve Seat Repair Kit{0738, 5117}
Repairing Line Relief Valve Seats in Hydraulic Control Valves Using the 229-3612 Hydraulic Valve Seat Repair Kit{0738, 5117}
Systems Operation
Relief Valve (Main)
D6T Track-Type Tractor Hydraulic System
Testing and Adjusting
Relief Valve (Main) - Test
D6T Track-Type Tractor Hydraulic System
Relief Valve (Steering) - Test and Adjust - Charge Pressure
D6T Track-Type Tractor Hydraulic System
Special Instruction
Procedure For Blade Solenoid Calibrations on Certain Track-Type Tractors{0785, 5479, 7610}
Procedure For Blade Solenoid Calibrations on Certain Track-Type Tractors{0785, 5479, 7610}
Troubleshooting
MID 113 - CID 0497 - FMI 03
D6R Series III, D6T and D7R Series II Track-Type Tractors
MID 113 - CID 0497 - FMI 05
D6R Series III, D6T and D7R Series II Track-Type Tractors
MID 113 - CID 0497 - FMI 06
D6R Series III, D6T and D7R Series II Track-Type Tractors
MID 113 - CID 0497 - FMI 13
D6R Series III, D6T and D7R Series II Track-Type Tractors
MID 113 - CID 0498 - FMI 03
D6R Series III, D6T and D7R Series II Track-Type Tractors
MID 113 - CID 0498 - FMI 05
D6R Series III, D6T and D7R Series II Track-Type Tractors
MID 113 - CID 0498 - FMI 06
D6R Series III, D6T and D7R Series II Track-Type Tractors
MID 113 - CID 0498 - FMI 13
D6R Series III, D6T and D7R Series II Track-Type Tractors
MID 113 - CID 0882 - FMI 03
D6R Series III, D6T and D7R Series II Track-Type Tractors
MID 113 - CID 0882 - FMI 05
D6R Series III, D6T and D7R Series II Track-Type Tractors
MID 113 - CID 0882 - FMI 06
D6R Series III, D6T and D7R Series II Track-Type Tractors
MID 113 - CID 1197 - FMI 03
D6R Series III, D6T and D7R Series II Track-Type Tractors
MID 113 - CID 1197 - FMI 05
D6R Series III, D6T and D7R Series II Track-Type Tractors
MID 113 - CID 1197 - FMI 06
D6R Series III, D6T and D7R Series II Track-Type Tractors
MID 113 - CID 1197 - FMI 13
D6R Series III, D6T and D7R Series II Track-Type Tractors
MID 113 - CID 1198 - FMI 03
D6R Series III, D6T and D7R Series II Track-Type Tractors
MID 113 - CID 1198 - FMI 05
D6R Series III, D6T and D7R Series II Track-Type Tractors
MID 113 - CID 1198 - FMI 06
D6R Series III, D6T and D7R Series II Track-Type Tractors
MID 113 - CID 1198 - FMI 13
D6R Series III, D6T and D7R Series II Track-Type Tractors
MID 113 - CID 1298 - FMI 13
D6R Series III, D6T and D7R Series II Track-Type Tractors
MID 113 - CID 1933 - FMI 03
D6R Series III, D6T and D7R Series II Track-Type Tractors
MID 113 - CID 1933 - FMI 05
D6R Series III, D6T and D7R Series II Track-Type Tractors
MID 113 - CID 1933 - FMI 06
D6R Series III, D6T and D7R Series II Track-Type Tractors
MID 113 - CID 1933 - FMI 13
D6R Series III, D6T and D7R Series II Track-Type Tractors
MID 113 - CID 1934 - FMI 03
D6R Series III, D6T and D7R Series II Track-Type Tractors
MID 113 - CID 1934 - FMI 05
D6R Series III, D6T and D7R Series II Track-Type Tractors
MID 113 - CID 1934 - FMI 06
D6R Series III, D6T and D7R Series II Track-Type Tractors
MID 113 - CID 1934 - FMI 13
D6R Series III, D6T and D7R Series II Track-Type Tractors
MID 113 - CID 2359 - FMI 13
D6R Series III, D6T and D7R Series II Track-Type Tractors
MID 114 - CID 0497 - FMI 03
AccuGrade® - CD700 Grade Control System (GPS/ATS/Laser)
MID 114 - CID 0497 - FMI 05
AccuGrade® - CD700 Grade Control System (GPS/ATS/Laser)
MID 114 - CID 0497 - FMI 06
AccuGrade® - CD700 Grade Control System (GPS/ATS/Laser)
MID 114 - CID 0498 - FMI 03
AccuGrade® - CD700 Grade Control System (GPS/ATS/Laser)
MID 114 - CID 0498 - FMI 05
AccuGrade® - CD700 Grade Control System (GPS/ATS/Laser)
MID 114 - CID 0498 - FMI 06
AccuGrade® - CD700 Grade Control System (GPS/ATS/Laser)
MID 114 - CID 1197 - FMI 03
AccuGrade® - CD700 Grade Control System (GPS/ATS/Laser)
MID 114 - CID 1197 - FMI 05
AccuGrade® - CD700 Grade Control System (GPS/ATS/Laser)
MID 114 - CID 1197 - FMI 06
AccuGrade® - CD700 Grade Control System (GPS/ATS/Laser)
MID 114 - CID 1198 - FMI 03
AccuGrade® - CD700 Grade Control System (GPS/ATS/Laser)
MID 114 - CID 1198 - FMI 05
AccuGrade® - CD700 Grade Control System (GPS/ATS/Laser)
MID 114 - CID 1198 - FMI 06
AccuGrade® - CD700 Grade Control System (GPS/ATS/Laser)
MID 114 - CID 2235 - FMI 03
AccuGrade® - CD700 Grade Control System (GPS/ATS/Laser)
MID 114 - CID 2235 - FMI 05
AccuGrade® - CD700 Grade Control System (GPS/ATS/Laser)
MID 114 - CID 2235 - FMI 06
AccuGrade® - CD700 Grade Control System (GPS/ATS/Laser)
MID 114 - CID 2324 - FMI 03
AccuGrade® - CD700 Grade Control System (GPS/ATS/Laser)
MID 114 - CID 2324 - FMI 05
AccuGrade® - CD700 Grade Control System (GPS/ATS/Laser)
MID 114 - CID 2324 - FMI 06
AccuGrade® - CD700 Grade Control System (GPS/ATS/Laser)
MID 114 - CID 0498 - FMI 06
AccuGrade® GPS v11 for CD700
MID 114 - CID 1197 - FMI 03
AccuGrade® GPS v11 for CD700
MID 114 - CID 1197 - FMI 05
AccuGrade® GPS v11 for CD700
MID 114 - CID 1198 - FMI 05
AccuGrade® GPS v11 for CD700
MID 114 - CID 0498 - FMI 05
AccuGrade® GPS v11 for CD700
MID 114 - CID 0497 - FMI 05
AccuGrade® GPS v11 for CD700
MID 114 - CID 0497 - FMI 06
AccuGrade® GPS v11 for CD700
MID 114 - CID 1198 - FMI 03
AccuGrade® GPS v11 for CD700
MID 114 - CID 0497 - FMI 03
AccuGrade® GPS v11 for CD700
MID 114 - CID 2324 - FMI 06
AccuGrade® GPS v11 for CD700
MID 114 - CID 2235 - FMI 06
AccuGrade® GPS v11 for CD700
MID 114 - CID 2324 - FMI 05
AccuGrade® GPS v11 for CD700
MID 114 - CID 2235 - FMI 05
AccuGrade® GPS v11 for CD700
MID 114 - CID 2324 - FMI 03
AccuGrade® GPS v11 for CD700
MID 114 - CID 1198 - FMI 06
AccuGrade® GPS v11 for CD700
MID 114 - CID 2235 - FMI 03
AccuGrade® GPS v11 for CD700
MID 114 - CID 1197 - FMI 06
AccuGrade® GPS v11 for CD700
MID 114 - CID 0498 - FMI 03
AccuGrade® GPS v11 for CD700
MID 114 - CID 0498 - FMI 03
AccuGrade® GPS v11 for CD700
Service Magazine
A New Coil Assembly is Now Used {5479}
2011/05/04
A New Solenoid Valve Group and A Coil Are Now Used {5479}
2009/02/09
An Improved Blade Solenoid Calibration Procedure Is Now Available for Certain Track-Type Tractors {0785, 5479, 7610}
2010/12/23
Specifications
Control Valve (Steering) - Steering
D6T Track-Type Tractor Hydraulic System
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.