AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

238-8827 INSTALLATION GP-SECURITY -MACHINE SECURITY SYSTEM S/N R9S1-UP AN ATTACHMENT 12M 2 MOTOR GRADER


ELECTRICAL AND STARTING SYSTEM
ELECTRONICS GP-MACHINE
LIGHTING GP
CONTROL GP-GRADE

MOTOR GRADER 12M 2 MOTOR GRADER R9S
 12M Series 2 Motor Grader R9S00001-UP (MACHINE) POWERED BY C9.3 Engine SEBP5038 12M 2 R9S   (2011)

ELECTRICAL AND STARTING SYSTEM

ELECTRONICS GP-MACHINE
INSTALLATION GP-SECURITY
238-8827 INSTALLATION GP-SECURITY
 

#SEBP50380330
 

238-8827: INSTALLATION GP-SECURITY

238-8827 INSTALLATION GP-SECURITY -MACHINE SECURITY SYSTEM
S/N R9S1-UP
AN ATTACHMENT
i02203699 SEBP5038
2388827 INSTALLATION GP-SECURITY Parts scheme
  For full view, you need register

Parts for your 12M 2 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
2. 3S-2093 [2] STRAP-CABLE  
3. 198-5389 [1] FILM-IDENTIFICATION (IGNITION SWITCH)  
4. 205-0826 [1] FILM-INSTRUCTION (MACHINE SECURITY, CONSOLE)  
5. 206-5162 J [2] KEY AS-ELECTRONIC (SECURITY)  
6. 206-5208 [1] COIL AS (EXCITER)  
  102-8802 [2] KIT-RECEPTACLE (2-PIN)  
    (EACH INCLUDES RECEPTACLE AS & WEDGE)
  205-8257 [1] COIL AS (EXCITER)  
7. 218-0404 [1] MODULE GP-INTERFACE (KEY)(MACHINE SECURITY SYSTEM)  
8. 219-6314 [2] KEY RING (IDENTIFICATION)  
11. 238-8813 [1] HARNESS AS-CHASSIS (MACHINE SECURITY SYSTEM)  
  8T-8729 [6] PIN-CONNECTOR (16-GA TO 18-GA)  
  8T-8730 [10] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  8T-8737 [2] PLUG-SEAL  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  155-2265 [1] KIT-CONNECTING PLUG (8-PIN)  
  155-2270 [2] KIT-CONNECTING PLUG (2-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS,WEDGE,& INTERFACE SEAL)
12. 242-3282 [1] LAMP AS-LED (24-VOLT, RED)  
14. 204-0813 [2] BOLT (M6X1X40-MM)  
15. 102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
16. 8C-5607 [4] MOUNT-ISOLATION  
17. 8C-5608 [2] SPACER (6.5X9.5X25.4-MM THK)  
18. 9X-6165 [4] WASHER (6.5X22X2.5-MM THK)  
  J   REQUIRES CORPORATE KEY
 

#SEBP50380331
 

310-2078: INSTALLATION GP-WARNING BEACON

310-2078 INSTALLATION GP-WARNING BEACON
S/N R9S1-UP
AN ATTACHMENT
i03468923 SEBP5038
3102078 INSTALLATION GP-WARNING BEACON Parts scheme
  For full view, you need register

Parts for your 12M 2 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 237-9736 [1] SWITCH AS-ROCKER (WARNING BEACON)  
2. 310-2088 [1] PLATE AS  
 

#SEBP50380332
 

361-3137: INSTALLATION GP-WARNING BEACON

361-3137 INSTALLATION GP-WARNING BEACON
S/N R9S1-UP
PART OF 391-8971 SNOW AR-MOTOR GRADER
FOR USE WITH @@@@@338-1132@@@@@
AN ATTACHMENT
i04852509 SEBP5038
3613137 INSTALLATION GP-WARNING BEACON Parts scheme
  For full view, you need register

Parts for your 12M 2 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 354-8027 [1] SWITCH GP-ROCKER (WARNING BEACON)  
  237-9736 SWITCH AS-ROCKER (WARNING BEACON)  
2. 356-5178 [1] PLATE AS  
  130-5300 [1] CLIP  
3. 5P-4115 [4] WASHER-HARD (7.2X19X2-MM THK)  
4. 8T-4138 M [4] BOLT (M6X1X20-MM)  
  M   METRIC PART
 

#SEBP50380333
 

384-5829: KIT-RETROFIT

384-5829 KIT-RETROFIT
S/N R9S1-UP
PART OF 526-3698 KIT-RETROFIT
FOR USE WITH ALL BOX FRAMES
i07003838 SEBP5038
  For full view, you need register

Parts for your 12M 2 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  474-5410 Y [1] HARNESS AS-SENSOR (ROTATION SENSOR)  
  448-1938 Y [1] HARNESS AS-SENSOR (INCLINATION)  
  288-0693 [4] BLOCK  
  5P-4135 [1] BOLT (3/4-10X8-IN)  
  8C-6857 [4] BOLT (3/4-10X2.75-IN)  
  8T-4136 M [4] BOLT (M10X1.5X25-MM)  
  8T-4137 M [18] BOLT (M10X1.5X20-MM)  
  8T-4186 M [1] BOLT (M10X1.5X40-MM)  
  8T-4192 M [1] BOLT (M12X1.75X25-MM)  
  8T-4194 M [4] BOLT (M12X1.75X50-MM)  
  8T-4196 M [2] BOLT (M10X1.5X35-MM)  
  8T-6466 M [1] BOLT (M10X1.5X60-MM)  
  1J-6762 [4] BOLT-PLOW (3/4-10X3-IN)  
  236-8826 [4] BOSS (1-1/8-18X0.708-IN)  
  255-3482 [1] BRACKET  
  327-0560 [1] BRACKET (RH)  
  327-0561 [1] BRACKET (LH)  
  436-3254 [1] BRACKET  
  298-3644 [1] BRACKET AS  
  308-9396 [2] BRACKET AS  
  511-2430 [1] BRACKET AS (LH)  
  511-2431 [1] BRACKET AS (RH)  
  448-1893 [1] BRACKET AS  
  127-9323 [1] BRACKET AS  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
  4P-7581 [4] CLIP (LADDER)  
  6D-4246 [2] CLIP (LOOP)  
  6V-1228 [1] CLIP  
  8M-2773 [5] CLIP (LOOP)  
  130-5300 [2] CLIP  
  169-5414 [1] CLIP  
  223-3490 [1] CLIP  
  8M-2770 [5] CLIP (LOOP)  
  5K-3294 [1] CLIP (SLOT)  
  4S-1962 [3] CLIP (LOOP)  
  356-3649 [1] HARNESS AS-CHASSIS (GRADE CONTROL)  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  7R-3029 [4] CAP-DUST  
  8T-8737 [3] PLUG-SEAL  
  9W-0844 [4] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  9W-0852 [2] PIN-CONNECTOR (14-GA TO 16-GA)  
  9X-3401 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  9X-3402 [8] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  9X-4385 [1] PLUG AS-CONNECTOR (6-PIN)  
  119-3662 E TUBE-HEAT SHRINK (10.85-MM DIA)(39-CM)  
  125-7875 E TUBE-HEAT SHRINK (7.44-MM DIA)(115-CM)  
  134-2540 [1] RECEPTACLE AS-CONNECTOR (3-PIN)  
  155-2255 [1] KIT-CONNECTING PLUG (12-PIN)  
  174-0503 [1] KIT-CONNECTING PLUG (3-PIN)  
    (EACH KIT INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
  228-3323 [4] CLIP-SPRING  
  243-5362 [1] CAP-DUST  
  308-9367 [1] HARNESS AS-SWITCH (ROTATION, INCLINATION)  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  5P-1424 E HOSE (258-CM)  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  8T-8730 [2] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  8T-8737 [1] PLUG-SEAL  
  9W-0844 [2] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  9X-3401 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  9X-3402 [6] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  125-7875 E TUBE-HEAT SHRINK (7.44-MM DIA)(30-CM)  
  134-2540 [1] RECEPTACLE AS-CONNECTOR (3-PIN)  
  155-2271 [2] KIT-CONNECTING PLUG (4-PIN)  
  174-0503 [1] KIT-CONNECTING PLUG (3-PIN)  
    (EACH KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  210-8958 E TUBE-HEAT SHRINK (24-MM DIA)(14-CM)  
  1K-6870 [1] LOCKNUT (3/4-10-THD)  
  096-4883 M [4] LOCKNUT (M10X1.5-THD)  
  8T-4244 M [1] NUT (M12X1.75-THD)  
  344-5675 M [1] NUT (M10X1.5-THD)  
  2J-3506 [4] NUT-FULL (3/4-10-THD)  
  132-8487 [4] NUT-RING  
  287-6688 [2] PLATE  
  288-5515 [1] PLATE AS  
  288-5516 [1] PLATE AS  
  107-1716 [16] SCREW (4-1/2-40X0.63-IN)  
  131-3539 M [4] SCREW-FLAT HEAD (M8X1.25X30-MM)  
  9C-5344 [3] SPACER (10.5X20X18-MM THK)  
  9G-7101 [1] SPACER (11X20X30-MM THK)  
  174-9692 [4] SPACER (20.5X35X16-MM THK)  
  7K-1181 [28] STRAP-CABLE  
  251-1133 [1] TUBE  
  8T-4123 [4] WASHER (22X35X3.5-MM THK)  
  8T-4121 [21] WASHER-HARD (11X21X2.5-MM THK)  
  8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
  111-9251 [4] WASHER-HARD (20X35X1.6-MM THK)  
  7D-1649 [8] WASHER-HARD (13.5X32X5-MM THK)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP50380334
 

441-4489: KIT-RETROFIT

441-4489 KIT-RETROFIT -FRONT WINDOW, HEATED
S/N R9S1-UP
REFER TO SPECIAL INSTRUCTIONS REHS7155 FOR INSTALLATION OF KIT
FIELD INSTALLATION
i05410877 SEBP5038
  For full view, you need register

Parts for your 12M 2 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  294-1018 [2] BRACKET  
  376-1386 [1] HARNESS AS-WIRING  
  7T-6364 [2] TERMINAL-BLADE (12-GA TO 16-GA)  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(21-CM)  
  126-1766 [2] SOCKET-CONNECTOR (14-GA TO 18-GA)  
  9X-3402 [1] SOCKET-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1768 [1] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS & WEDGE)
  329-3734 E TAPE-ELECTRICAL (14-CM)  
  9X-2045 M [6] SCREW-TRUSS HEAD (M6X1X20-MM)  
  294-1015 E SEAL (52-CM)  
  294-1014 E SEAL-GLASS (180-CM)  
  7K-1181 [1] STRAP-CABLE  
  114-6658 [6] WASHER (6.5X17X1-MM THK)  
  380-3885 [1] WINDOW AS-FRONT (HEATED)  
  126-1768 [2] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS & WEDGE)
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP50380335
 

441-4490: KIT-RETROFIT

441-4490 KIT-RETROFIT -FRONT WINDOW
S/N R9S1-UP
REFER TO SPECIAL INSTRUCTIONS REHS7155 FOR INSTALLATION OF KIT
FIELD INSTALLATION
i05410992 SEBP5038
  For full view, you need register

Parts for your 12M 2 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  294-1018 [2] BRACKET  
  376-1386 [1] HARNESS AS-WIRING  
  7T-6364 [2] TERMINAL-BLADE (12-GA TO 16-GA)  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(21-CM)  
  126-1766 [2] SOCKET-CONNECTOR (14-GA TO 18-GA)  
  9X-3402 [1] SOCKET-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1768 [1] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS & WEDGE)
  329-3734 E TAPE-ELECTRICAL (14-CM)  
  9X-2045 M [6] SCREW-TRUSS HEAD (M6X1X20-MM)  
  294-1015 E SEAL (52-CM)  
  294-1014 E SEAL-GLASS (180-CM)  
  7K-1181 [1] STRAP-CABLE  
  114-6658 [6] WASHER (6.5X17X1-MM THK)  
  380-3886 [1] WINDOW AS-FRONT (HEATED)  
  126-1768 [2] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS & WEDGE)
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP50380336
 

441-4491: KIT-RETROFIT

441-4491 KIT-RETROFIT -DOOR
S/N R9S1-UP
FOR USE WITH REHS7154, REHS7161, REHS7162
FIELD INSTALLATION
i05411615 SEBP5038
  For full view, you need register

Parts for your 12M 2 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  256-9448 [1] ARM GP-WINDOW WIPER (DOOR, RH)  
  295-1117 [1] ARM GP-WINDOW WIPER (DOOR, RH)  
    (EACH ARM GP-WINDOW WIPER INCLUDES)
  8T-1119 [1] NOZZLE AS-WASHER  
  194-5171 E HOSE (58-CM)  
  240-8666 [3] CLIP  
  272-1623 [1] BELLCRANK AS  
  5C-8811 [1] BLADE AS-WIPER (500-MM)  
  6V-5851 [1] BLADE AS-WIPER (400-MM)  
  8T-4970 M [3] BOLT (M6X1X14-MM)  
  5C-9553 M [9] BOLT (M6X1X16-MM)  
  9X-2125 M [10] BOLT-LOCKING (M10X1.5X25-MM)  
  261-1731 [1] BOOT  
  357-9190 [1] BRACKET AS  
  357-9191 [2] BUMPER  
  269-2890 [1] CLEVIS  
  269-2893 [1] CLIP  
  8T-5400 [2] CONNECTOR  
  357-9260 [1] COVER (WIPER-RH)  
  357-9261 [1] COVER-LATCH  
  357-9181 [1] DOOR AS (RH)  
  7Y-9096 M [2] SCREW-TRUSS HEAD (M6X1X6-MM)  
  9X-2042 M [3] SCREW-TRUSS HEAD (M6X1X12-MM)  
  308-2903 M [3] NUT-WELD (M6X1-THD)  
  357-9175 [2] BRACKET AS  
    (EACH INCLUDES)
  308-2902 [2] NUT-WELD  
  357-9177 [1] BRACKET AS  
  308-2902 [2] NUT-WELD  
  113-8492 [3] FUSE (20-AMPERE)  
  252-1863 [1] GASKET  
  380-3889 [1] GLASS AS-DOOR (RH)  
  126-1768 [4] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  155-2271 [1] KIT-CONNECTING PLUG (4-PIN)  
    (INCLUDES PLUG AS & WEDGE)
  252-1862 [1] HANDLE AS-PULL  
  357-9187 [1] HANDLE AS-PULL  
  376-4793 [1] HANDLE AS-PULL  
  6V-9632 M [1] NUT-WELD (M6X1-THD)  
  357-0728 [1] HARNESS AS-WINDOW WIPER (LH)  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  8T-2225 [9] TUBE-HEAT SHRINK (25.4-MM DIA)  
  8T-8737 [2] PLUG-SEAL  
  9X-3402 [5] SOCKET-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1768 [5] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  144-0195 E HOSE (119-CM)  
  9X-3401 [5] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [5] PIN-CONNECTOR (14-GA TO 16-GA)  
  155-2274 [1] KIT-CONNECTING PLUG (6-PIN)  
  297-4169 [2] GROMMET  
  329-3734 E TAPE-ELECTRICAL (67-CM)  
  361-2492 [1] HARNESS AS-WINDOW WIPER (RH)  
  102-8802 [2] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  8T-2225 E TUBE-HEAT SHRINK (25.4-MM DIA)(10-CM)  
  8T-8737 [2] PLUG-SEAL  
  9X-3402 [5] SOCKET-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1768 [5] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  144-0195 E HOSE (112-CM)  
  9X-3401 [13] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [13] PIN-CONNECTOR (14-GA TO 16-GA)  
  155-2274 [1] KIT-CONNECTING PLUG (6-PIN)  
    (INCLUDES PLUG AS & WEDGE)
  297-4169 [2] GROMMET  
  329-3734 E TAPE-ELECTRICAL (113-CM)  
  375-8422 [1] HARNESS AS-WIRING  
  7T-6364 [4] TERMINAL-BLADE (12-GA TO 16-GA)  
  125-7874 [58] TUBE-HEAT SHRINK (5.72-MM DIA)  
  9X-3402 [4] SOCKET-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1768 [4] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  155-2271 [1] KIT-CONNECTING PLUG (4-PIN)  
    (INCLUDES PLUG AS & WEDGE)
  1P-0810 E TAPE-ELECTRICAL (4-CM)  
  329-3734 E TAPE-ELECTRICAL (22-CM)  
  377-7082 [1] HARNESS AS-WIRING (HEATED WINDOW)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  7R-2751 [2] PLUG-CONNECTOR (1-PIN)  
  9X-1054 [2] PLUG AS-CONNECTOR (4-PIN)  
  9X-1056 [6] TERMINAL-RECEPTACLE (14-GA TO 16-GA)  
  100-5041 [2] TERMINAL-RECEPTACLE (18-GA TO 20-GA)  
  119-3662 E TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM)  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM)  
  125-7875 E TUBE-HEAT SHRINK (7.44-MM DIA)(15-CM)  
  9X-3402 [4] SOCKET-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1768 [4] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  128-5016 [4] SEAL-CABLE  
  131-1506 [2] TERMINAL AS  
    (EACH INCLUDES)
  2L-8079 [1] TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW)  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(3-CM)  
  9X-3401 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [2] PIN-CONNECTOR (14-GA TO 16-GA)  
  155-2271 [1] KIT-CONNECTING PLUG (4-PIN)  
  196-2413 [6] TERMINAL AS (12-GA)  
    (EACH INCLUDES)
  128-4123 [1] SEAL-CABLE  
  185-1860 [2] SEAL-WIRE  
  185-1861 [2] SEAL-WIRE  
  202-0313 [2] TERMINAL AS (18-GA)  
  202-0314 [2] TERMINAL AS (14-GA)  
  204-1297 [2] TERMINAL AS-BLADE (18-GA TO 20-GA)  
    (EACH INCLUDES)
  235-4123 [1] TERMINAL (18-GA TO 20-GA)  
  245-7434 [1] KIT-CONNECTING PLUG (10-PIN)  
  329-3734 E TAPE-ELECTRICAL (713-CM)  
  379-2934 [1] HOLDER AS-FUSE  
  196-2383 [1] KIT-CONNECTING PLUG (8-PIN)  
  380-6158 [2] HINGE AS  
    (EACH INCLUDES)
  372-5042 [2] BUSHING  
  144-0195 E HOSE (40-CM)  
  328-4985 [1] LATCH AS-DOOR (RH)  
  357-9755 [1] LINKAGE  
  357-9654 [1] LINKAGE GP-WIPER  
  3F-9556 [2] LOCKWASHER  
  5C-7261 M [2] NUT (M8X1.25-THD)  
  206-5823 [2] CAP (WIPER MOTOR)  
   
    (ABOVE PARTS ARE PART OF THE WIPER GROUP)
   
  1H-3244 [3] LOCKWASHER  
  3F-9556 [1] LOCKWASHER  
  135-0611 [1] MOTOR GP-WINDOW WIPER (24-VOLT, 2-SPEED)  
  8T-8737 [1] PLUG-SEAL  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  5C-7261 M [1] NUT (M8X1.25-THD)  
  5C-7261 M [1] NUT (M8X1.25-THD)  
  172-8591 M [3] NUT-CLIP (M6X1-THD)  
  269-2892 [1] PIN  
  6V-7636 [2] PIN AS-SPRING  
  357-9188 [1] PLATE  
  377-7085 [1] PLATE AS  
  6V-9632 M [2] NUT-WELD (M6X1-THD)  
  380-9512 [1] PLATE AS  
  6V-9632 M [2] NUT-WELD (M6X1-THD)  
  3E-5239 [2] RELAY AS (24-VOLT)  
  381-2329 [1] RELAY AS-TIMER  
   
    (ABOVE PARTS ARE PART OF THE WIRING GROUP)
   
  9S-2437 [2] SCREW-TAPPING (10-24X19.05-MM)  
  3E-8020 M [4] SCREW-TRUSS HEAD (M6X1X25-MM)  
  9X-2042 M [2] SCREW-TRUSS HEAD (M6X1X12-MM)  
  9X-2043 M [13] SCREW-TRUSS HEAD (M6X1X14-MM)  
  9X-2044 M [2] SCREW-TRUSS HEAD (M6X1X16-MM)  
  367-2761 E SEAL (500-CM)  
  384-4004 E SEAL (500-CM)  
  387-5615 [1] SEAL  
  387-5616 [1] SEAL  
  387-5617 [1] SEAL  
   
    (ABOVE PARTS ARE PART OF THE DOOR GROUP)
   
  285-3692 [1] SPACER-SPECIAL  
  6L-7008 [2] STRAP-CABLE  
  3S-2093 [6] STRAP-CABLE  
  3S-2093 [20] STRAP-CABLE  
  331-6321 [1] SWITCH AS-ROCKER (WINDOW DEFROSTER)  
  2U-4504 [1] TEE  
  6K-9632 [1] TEE  
  7Y-3474 [1] VALVE AS-CHECK (WINDOW WASHER)  
  114-6658 [2] WASHER (6.5X17X1-MM THK)  
  9X-8256 [9] WASHER (6.6X12X2-MM THK)  
  8T-4121 [10] WASHER-HARD (11X21X2.5-MM THK)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP50380337
 

481-2128: KIT-RETROFIT

481-2128 KIT-RETROFIT -STABLE GRADE
S/N R9S1-UP
PART OF 526-3698 KIT-RETROFIT
FIELD INSTALLATION
i06541837 SEBP5038
  For full view, you need register

Parts for your 12M 2 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  483-1716 Y [1] HARNESS AS-CONTROL  
  6V-7357 M [2] BOLT (M6X1X25-MM)  
  8T-4136 M [2] BOLT (M10X1.5X25-MM)  
  457-2082 [1] BRACKET AS  
  6V-9632 M [2] NUT-WELD (M6X1-THD)  
  4P-7581 [2] CLIP (LADDER)  
  130-5300 [1] CLIP  
  333-8538 [1] SENSOR AS-INERTIAL  
  386-0444 [1] HARNESS AS-SENSOR  
  112-4550 E SLEEVE (20-CM)  
  151-9275 [1] KIT-RECEPTACLE (6-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  9X-3401 [6] PIN-CONNECTOR (16-GA TO 18-GA)  
  7K-1181 [20] STRAP-CABLE  
  9X-8256 [2] WASHER (6.6X12X2-MM THK)  
  8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP50380338
 

481-5019: KIT-RETROFIT

481-5019 KIT-RETROFIT
S/N R9S1-UP
PART OF 526-3698 KIT-RETROFIT
FIELD INSTALLATION
i06676791 SEBP5038
  For full view, you need register

Parts for your 12M 2 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  155-2255 [1] KIT-CONNECTING PLUG (12-PIN)  
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
  245-7434 [1] KIT-CONNECTING PLUG (10-PIN)  
    (INCLUDES PLUGS & WIRE ASSEMBLIES)
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  9X-3401 [10] PIN-CONNECTOR (16-GA TO 18-GA)  
  8T-8737 [6] PLUG-SEAL  
  212-4333 [1] RECEPTACLE AS (12-PIN)  
  102-8801 [1] KIT-RECEPTACLE (12-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  8T-8729 [12] PIN-CONNECTOR (16-GA TO 18-GA)  
  9X-3402 [30] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  7K-1181 [25] STRAP-CABLE  
  419-0845 [1] SWITCH AS-ROCKER (AUTO ARTICULATION)  
 

#SEBP50380339
 

481-6747: KIT-RETROFIT

481-6747 KIT-RETROFIT
S/N R9S1-UP
TIER 4I MIGRATION RETROFIT KIT
FOR USE WITH USED 12M2 MACHINES TO REMOVE TIER 4 IRON AND DECERTIFY THE MACHINE
FIELD INSTALLATION
i06970334 SEBP5038
  For full view, you need register

Parts for your 12M 2 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  6V-9829 [1] CAP (ORFS)  
  6V-9828 [1] CAP (ORFS)  
  9S-8002 [2] PLUG (7/16-20-THD)  
  360-3677 [1] PLUG (7/16-20-THD)  
  360-3681 [1] PLUG (7/8-14-THD)  
  360-3693 [1] PLUG (3/4-16-THD)  
  6V-3251 [1] SEAL-O-RING  
  6V-9027 [3] SEAL-O-RING  
  033-6028 [1] SEAL-O-RING  
 

Information:

Special Instruction
Diagnostic Code Information for Caterpillar <SUP>&reg;</SUP> Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Diagnostic Code Information for Caterpillar ® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Service Magazine
Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16

Caterpillar Parts SIS Catalog 12M 2 :

INSTALLATION GP-LIGHTING
233-3126 INSTALLATION GP-LIGHTING
INSTALLATION AR-COMMUNICATION
469-0818 INSTALLATION AR-COMMUNICATION
464-6808 INSTALLATION AR-COMMUNICATION
464-6805 INSTALLATION AR-COMMUNICATION
464-6443 INSTALLATION AR-COMMUNICATION
INSTALLATION AR-COMMUNICATION
380-6092 INSTALLATION AR-COMMUNICATION
INSTALLATION AR-COMMUNICATION
373-6739 INSTALLATION AR-COMMUNICATION
INSTALLATION AR-COMMUNICATION
361-3107 INSTALLATION AR-COMMUNICATION
INSTALLATION GP-WARNING BEACON
310-2078 INSTALLATION GP-WARNING BEACON
INSTALLATION GP-WARNING BEACON
361-3137 INSTALLATION GP-WARNING BEACON
384-5829 KIT-RETROFIT
441-4489 KIT-RETROFIT
441-4490 KIT-RETROFIT
441-4491 KIT-RETROFIT
481-2128 KIT-RETROFIT
481-5019 KIT-RETROFIT

Truck sale:

 
181,000 
Caterpillar 12M2, Construction
- motor graders
YANCEY BROS. CO.
GA
 
187,500 
Caterpillar 12M2, Construction
- motor graders
YANCEY BROS. CO.
GA
 
289,000 
Caterpillar 12M2, Construction
- motor graders
WAGNER EQUIPMENT CO
 
170,000 
Caterpillar 12M2, Construction
- motor graders
YANCEY BROS. CO.
GA
Caterpillar 12M2, Construction
205,000 
Caterpillar 12M2, Construction
- motor graders
CAROLINA CAT
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.