OPERATOR STATION
FAN GPSEAT GP
INSTALLATION GP-CONTROLS
BRAKING SYSTEM
CONTROL GPOPERATOR STATION
CONTROL GP-ELECTROHYDRAULICSEAT GP
DOOR GP
CAB GP
OPERATOR STATION
FAN GP
#SEBP50380950
233-3137: FAN GP-CIRCULATING
233-3137 FAN GP-CIRCULATING -DEFROSTER
S/N R9S1-UP
WITH SWITCH
PART OF 357-9091, 377-3931 CAB AR, 355-8804, 389-7322, 389-7323 OPTION AR-CAB
Type 2
AN ATTACHMENT
S/N R9S1-UP
WITH SWITCH
PART OF 357-9091, 377-3931 CAB AR, 355-8804, 389-7322, 389-7323 OPTION AR-CAB
Type 2
AN ATTACHMENT
For full view, you need register
Parts for your 12M 2 MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7T-4003 | [1] | RESISTOR | |
| 2. | 170-5334 Y | [1] | FAN GP-CIRCULATING (FRONT DEFROSTER) | |
| 3. | 367-5211 | [1] | SWITCH AS-ROCKER (24-VOLT)(FAN BLOWER SPEED) | |
| 4. | 154-8079 C | [2] | NUT-RETAINER | |
| 5. | 9X-2045 M | [4] | SCREW-TRUSS HEAD (M6X1X20-MM) | |
| 6. | 213-7315 CM | [2] | SCREW-TRUSS HEAD (M4X0.7X25-MM) | |
| 7. | 5P-8441 | [1] | GROMMET | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP50380951
174-2231: HOUSING GP-SEAT SUSPENSION
174-2231 HOUSING GP-SEAT SUSPENSION
S/N R9S1-UP
PART OF 160-7165 SUSPENSION GP-SEAT
AN ATTACHMENT
S/N R9S1-UP
PART OF 160-7165 SUSPENSION GP-SEAT
AN ATTACHMENT
For full view, you need register
Parts for your 12M 2 MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1Y-7927 | [1] | PIN | |
| 2. | 2D-6235 | [2] | LOCKNUT (1/4-20-THD) | |
| 3. | 2M-7819 | [4] | RING-RETAINING | |
| 4. | 3D-2975 | [2] | RING-RETAINING | |
| 5. | 4B-5059 | [6] | WASHER (15X29.5X2.5-MM THK) | |
| 6. | 4N-2927 | [2] | RACE-THRUST BEARING | |
| 7. | 5D-4822 | [2] | RING-RETAINING | |
| 8. | 5P-8445 | [4] | RING-RETAINING | |
| 9. | 5V-0770 | [2] | BOLT-CARRIAGE (1/4-20X0.74-IN) | |
| 10. | 7M-7219 | [1] | BEARING-THRUST | |
| 11. | 7V-5191 | [2] | SPACER (28X10X7.1-MM THK) | |
| 12. | 8L-8413 | [2] | STRAP-CABLE (WHITE) | |
| 13. | 8S-7803 | [4] | RING-RETAINING | |
| 14. | 8Y-6041 | [1] | ARM AS | |
| 15. | 8Y-6045 | [1] | CAM | |
| 16. | 8Y-6046 | [1] | PIN | |
| 17. | 8Y-6047 | [2] | PIN | |
| 18. | 8Y-6060 | [2] | ROLLER | |
| 19. | 8Y-6062 | [1] | LINK-ACTUATOR (RH) | |
| 20. | 8Y-6063 | [1] | LINK-ACTUATOR (LH) | |
| 21. | 8Y-6064 | [2] | ROLLER-SLIDER | |
| 22. | 8Y-6066 | [1] | SPRING | |
| 23. | 8Y-6067 | [1] | SPACER (10.54-MM THK) | |
| 24. | 8Y-6068 | [1] | NUT (3/8X16-THD) | |
| 25. | 8Y-6069 | [1] | ADJUSTER AS | |
| 26. | 9X-8918 | [3] | SCREW-FLAT HEAD (8-32X0.5-IN) | |
| 27. | 095-0878 | [1] | PIN-SPRING | |
| 28. | 131-4242 | [1] | BOLT (3/8-16X5.18-IN) | |
| 29. | 131-5167 | [1] | KNOB AS-ADJUSTMENT (WEIGHT) | |
| 30. | 161-5967 | [1] | SHAFT | |
| 31. | 174-2237 | [1] | FRAME AS-SUSPENSION | |
| AVAILABLE REPAIR KIT(S): | ||||
| 8Y-5945 | [1] | KIT-SUSPENSION KNOB (HEIGHT ADJUSTMENT) | ||
| (INCLUDES KNOBS) | ||||
| 8Y-6859 | [1] | KIT-SPRING (SUSPENSION SEAT) | ||
| (INCLUDES SPRINGS, BUSHINGS & RINGS) | ||||
| 8Y-6860 | [1] | KIT-SPRING (HEIGHT ADJUSTMENT)(SUSPENSION SEAT) | ||
| (INCLUDES SPRINGS, BUSHINGS, RODS & SPACERS) | ||||
| 100-3224 | [1] | KIT-INDICATOR (WEIGHT ADJUSTMENT)(SUSPENSION SEAT) | ||
| (INCLUDES TAPE, GUIDE & STRAPS) | ||||
| 100-5179 | [1] | KIT-BUMPER (WEIGHT ADJUSTMENT)(SUSPENSION SEAT) | ||
| (INCLUDES BUMPERS) | ||||
| 108-4086 | [1] | KIT-FOLLOWER (SUSPENSION SEAT) | ||
| (INCLUDES FOLLOWER & PIN) | ||||
| 108-4087 | [1] | KIT-FOLLOWER (SUSPENSION SEAT) | ||
| (INCLUDES FOLLOWER & PIN) | ||||
| 108-4103 | [1] | KIT-BEARING (SUSPENSION SEAT) | ||
| (INCLUDES ROLLER ASSEMBLIES) | ||||
#SEBP50380952
463-6258: INSTALLATION GP-CONTROLS
463-6258 INSTALLATION GP-CONTROLS -JOYSTICK
S/N R9S1-UP
PART OF 526-3698 KIT-RETROFIT
FIELD INSTALLATION
S/N R9S1-UP
PART OF 526-3698 KIT-RETROFIT
FIELD INSTALLATION
For full view, you need register
Parts for your 12M 2 MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 434-2232 Y | [1] | CONTROL GP-JOYSTICK (LH) | ||
| 434-2233 Y | [1] | CONTROL GP-JOYSTICK (RH) | ||
| 438-3108 Y | [1] | HARNESS AS-WIRING (JOYSTICK) | ||
| 458-7887 Y | [1] | HARNESS AS-WIRING (CONSOLE, RH) | ||
| 458-7888 Y | [1] | HARNESS AS-WIRING (YW ADAPTER) | ||
| 457-7811 | [1] | FILM-IDENTIFICATION (GRADE CONTROL) | ||
| 457-7812 | [1] | FILM-IDENTIFICATION (INSTRUCTION) | ||
| 251-2247 | [2] | GROMMET | ||
| 458-7889 | [1] | HARNESS AS-WIRING (ECM) | ||
| 8T-8737 | [1] | PLUG-SEAL | ||
| 9X-3402 | [14] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [14] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 155-2259 | [1] | WEDGE-PLUG LOCK (8-PIN) | ||
| 155-2265 | [1] | KIT-CONNECTING PLUG (8-PIN) | ||
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP50380953
473-5233: KIT-CAB
For full view, you need register
Parts for your 12M 2 MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 438-8077 | [1] | BIN-STORAGE | ||
| 438-8078 | [1] | BIN-STORAGE | ||
| 214-9186 | [5] | BUTTON | ||
| 443-6429 | [1] | FLOOR MAT AS | ||
| 445-0466 | [2] | INSERT | ||
| 463-6185 | [1] | LINER | ||
| 463-6186 | [1] | LINER | ||
| 441-7480 | [1] | PLATE AS | ||
| 9R-2672 M | [1] | BOSS-THREADED (M10X1.5X120-MM) | ||
| 9R-2821 M | [1] | BOSS (M10X1.5X15-MM) | ||
| 355-5860 | [6] | RECEPTACLE (CLIP) | ||
| 212-6891 | [6] | RETAINER | ||
| 419-8564 | [2] | STRAP | ||
| 448-3613 | [1] | STRAP | ||
| 334-6090 | [6] | STUD | ||
| 417-6775 | [1] | TRAY | ||
| M | METRIC PART | |||
#SEBP50380954
416-0165: KIT-JOYSTICK CONTROL
For full view, you need register
Parts for your 12M 2 MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| (NO SERVICED PARTS) | ||||
| (INCLUDES FACEPLATE ASSEMBLY, ESD GROUNDING WRIST STRAP ASM, CONNECTOR REMOVAL TOOL, ROLY SWABS, PRE-MOISTENED TOWELETTES, CABLE TIES, SCREWS-SPARES, GREASE SYRINGE, BIT-TORX, PAPER TOWELS, LABEL & PLASTIC ESD SHEET) | ||||
#SEBP50380955
397-6405: KIT-SEAT AIR COMPRESSOR
397-6405 KIT-SEAT AIR COMPRESSOR
S/N R9S1-UP
FIELD REPLACEMENT FOR @@@@@237-3970@@@@@
CANNOT BE USED WITH @@@@@391-8968@@@@@
S/N R9S1-UP
FIELD REPLACEMENT FOR @@@@@237-3970@@@@@
CANNOT BE USED WITH @@@@@391-8968@@@@@
For full view, you need register
Parts for your 12M 2 MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8L-8413 | [1] | STRAP-CABLE (WHITE) | |
| 2. | 186-5107 | [2] | SCREW-DRIVE (NO 8-16X1.25-IN) | |
| 3. | 387-0317 | [1] | WIRE AS (16-GA, BLACK) | |
| 4. | 372-2158 | [1] | BRACKET-MOUNTING | |
| 5. | 387-0314 | [1] | WIRE AS (16-GA, ORANGE) | |
| PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY | ||||
#SEBP50380956
299-1021: LEVER GP-CAB DOOR
For full view, you need register
Parts for your 12M 2 MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 115-9345 | [1] | KNOB-CONTROL | |
| 2. | 299-1023 | [1] | BRACKET | |
| 3. | 299-1024 | [1] | LEVER | |
| 4. | 299-1441 | [1] | SPRING | |
| 5. | 299-1442 | [1] | SPRING | |
| 6. | 114-6658 | [2] | WASHER (6.5X17X1-MM THK) | |
| 7. | 8T-7971 | [2] | WASHER-HARD (13.5X25.5X5-MM THK) | |
| 8. | 9X-2042 M | [2] | SCREW-TRUSS HEAD (M6X1X12-MM) | |
| M | METRIC PART | |||
#SEBP50380957
310-2037: LINER GP-CAB
For full view, you need register
Parts for your 12M 2 MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-6389 Y | [1] | LAMP GP-DOME (24-VOLT)(CAB) | |
| 2. | 4E-8722 | [24] | NUT (RETAINER) | |
| 3. | 5T-1625 | [1] | PLATE AS | |
| 4. | 9F-8125 | [3] | LOCKWASHER | |
| 5. | 9R-0932 | [1] | LATCH | |
| 6. | 101-0003 | [2] | FASTENER | |
| 7. | 131-5171 | [1] | CLIP | |
| 8. | 250-8335 | [2] | LAMP AS (24-VOLT)(IMPLEMENT CONTROL) | |
| (EACH INCLUDES) | ||||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9. | 361-0423 | [1] | COVER | |
| 10. | 297-4151 | [1] | COVER | |
| 11. | 310-2083 | [1] | LINER AS-CAB | |
| 174-5763 | [16] | CLIP | ||
| 12. | 330-3862 | [1] | PLATE | |
| 13. | 330-3863 | [1] | FILM-INSTRUCTION (WIPER) | |
| 14. | 330-3864 | [1] | PLATE | |
| 15. | 344-0980 | [1] | PLATE AS | |
| 16. | 363-5824 | [1] | PLATE AS | |
| 17. | 114-6658 | [8] | WASHER (6.5X17X1-MM THK) | |
| 18. | 112-8728 | [3] | SCREW (10-32X1.25-IN) | |
| 19. | 096-6166 | [4] | WASHER-HARD (4.5X9X1-MM THK) | |
| 20. | 7X-0579 | [16] | WASHER-HARD (8.8X25.5X2-MM THK) | |
| 21. | 3E-8020 M | [4] | SCREW-TRUSS HEAD (M6X1X25-MM) | |
| 22. | 9K-5635 | [8] | SCREW-TAPPING (8-18X1-IN) | |
| 23. | 9X-2044 M | [4] | SCREW-TRUSS HEAD (M6X1X16-MM) | |
| 24. | 9X-2045 M | [16] | SCREW-TRUSS HEAD (M6X1X20-MM) | |
| 25. | 8T-5372 D | SEAL (0.6-M) | ||
| D | ORDER BY THE METER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP50380958
368-8595: LINER GP-CAB
368-8595 LINER GP-CAB
S/N R9S1-UP
PART OF 379-3676, 381-3760, 381-3761 CAB AR
AN ATTACHMENT
S/N R9S1-UP
PART OF 379-3676, 381-3760, 381-3761 CAB AR
AN ATTACHMENT
For full view, you need register
Parts for your 12M 2 MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-6389 Y | [1] | LAMP GP-DOME (24-VOLT)(CAB) | |
| 2. | 172-8591 M | [18] | NUT-CLIP (M6X1-THD) | |
| 3. | 5T-1625 | [1] | PLATE AS | |
| 4. | 096-0192 | [3] | LOCKWASHER | |
| 5. | 9R-0932 | [1] | LATCH | |
| 6. | 101-0003 | [2] | FASTENER | |
| 7. | 112-8728 | [3] | SCREW (10-32X1.25-IN) | |
| 8. | 131-5171 | [1] | CLIP | |
| 9. | 250-8335 | [2] | LAMP AS (24-VOLT)(IMPLEMENT CONTROL) | |
| (EACH INCLUDES) | ||||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 10. | 330-3862 | [1] | PLATE | |
| 11. | 330-3863 | [1] | FILM-INSTRUCTION (WIPER) | |
| 12. | 330-3864 | [1] | PLATE | |
| 13. | 344-0980 | [1] | PLATE AS | |
| 14. | 361-0423 | [1] | COVER | |
| 15. | 361-0426 | [1] | LINER AS-CAB (LH) | |
| 174-5763 | [6] | CLIP | ||
| 16. | 361-0427 | [1] | LINER AS-CAB (RH) | |
| 174-5763 | [10] | CLIP | ||
| 17. | 363-5824 | [1] | PLATE AS | |
| 18. | 114-6658 | [8] | WASHER (6.5X17X1-MM THK) | |
| 19. | 096-6166 | [4] | WASHER-HARD (4.5X9X1-MM THK) | |
| 20. | 7X-0579 | [16] | WASHER-HARD (8.8X25.5X2-MM THK) | |
| 21. | 9K-5635 | [8] | SCREW-TAPPING (8-18X1-IN) | |
| 22. | 447-8925 | [6] | INSERT-THREADED | |
| 23. | 9X-2045 M | [10] | SCREW-TRUSS HEAD (M6X1X20-MM) | |
| 24. | 9X-2046 M | [11] | SCREW-TRUSS HEAD (M6X1X35-MM) | |
| 25. | 8T-5372 D | SEAL (0.6-M) | ||
| 26. | 446-1483 M | [3] | SCREW-TRUSS HEAD (M6X1X45-MM) | |
| 27. | 206-3747 | [3] | SPACER (6.3X12.7X32-MM THK) | |
| 28. | 160-2169 | [2] | SPACER (7X11X8.4-MM THK) | |
| D | ORDER BY THE METER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP50380959
447-2230: LINER GP-CAB
447-2230 LINER GP-CAB
S/N R9S1-UP
PART OF 379-3676, 381-3760, 381-3761 CAB AR
Type 1
AN ATTACHMENT
S/N R9S1-UP
PART OF 379-3676, 381-3760, 381-3761 CAB AR
Type 1
AN ATTACHMENT
For full view, you need register
Parts for your 12M 2 MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-6389 Y | [1] | LAMP GP-DOME (24-VOLT)(CAB) | |
| 2. | 172-8591 M | [18] | NUT-CLIP (M6X1-THD) | |
| 3. | 5T-1625 | [1] | PLATE AS | |
| 4. | 096-0192 | [3] | LOCKWASHER | |
| 5. | 9R-0932 | [1] | LATCH | |
| 6. | 101-0003 | [2] | FASTENER | |
| 7. | 112-8728 | [3] | SCREW (10-32X1.25-IN) | |
| 8. | 131-5171 | [1] | CLIP | |
| 9. | 250-8335 | [2] | LAMP AS (24-VOLT)(IMPLEMENT CONTROL) | |
| (EACH INCLUDES) | ||||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 186-3735 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 10. | 330-3862 | [1] | PLATE | |
| 11. | 330-3863 | [1] | FILM-INSTRUCTION (WIPER) | |
| 12. | 330-3864 | [1] | PLATE | |
| 13. | 344-0980 | [1] | PLATE AS | |
| 14. | 361-0423 | [1] | COVER | |
| 15. | 361-0426 | [1] | LINER AS-CAB (LH) | |
| 174-5763 | [6] | CLIP | ||
| 16. | 447-2231 | [1] | LINER AS-CAB | |
| 174-5763 | [10] | CLIP | ||
| 17. | 363-5824 | [1] | PLATE AS | |
| 18. | 114-6658 | [8] | WASHER (6.5X17X1-MM THK) | |
| 19. | 096-6166 | [4] | WASHER-HARD (4.5X9X1-MM THK) | |
| 20. | 7X-0579 | [16] | WASHER-HARD (8.8X25.5X2-MM THK) | |
| 21. | 9K-5635 | [8] | SCREW-TAPPING (8-18X1-IN) | |
| 22. | 447-8925 | [6] | INSERT-THREADED | |
| 23. | 9X-2045 M | [10] | SCREW-TRUSS HEAD (M6X1X20-MM) | |
| 24. | 9X-2046 M | [11] | SCREW-TRUSS HEAD (M6X1X35-MM) | |
| 25. | 8T-5372 D | SEAL (0.6-M) | ||
| 26. | 446-1483 M | [3] | SCREW-TRUSS HEAD (M6X1X45-MM) | |
| 27. | 206-3747 | [3] | SPACER (6.3X12.7X32-MM THK) | |
| 28. | 160-2169 | [2] | SPACER (7X11X8.4-MM THK) | |
| D | ORDER BY THE METER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
