193-7361 AXLE GP S/N LJR1-UP PART OF 321-3122 POWER TRAIN AR D6N TRACK-TYPE TRACTOR

Pos.	Part No	Qty	Parts name
1.	3T-9549	[1]	ADAPTER
2.	7G-4998	[1]	SPOOL-BYPASS
3.	164-7577 Y	[1]	SWITCH GP-BYPASS (POWER TRAIN OIL FILTER)
4.	334-2679	[1]	SPRING
5.	334-2680	[1]	SPRING
6.	5P-7815	[1]	SEAL-O-RING
7.	6V-5050	[1]	SEAL-O-RING
8.	9S-8008	[1]	PLUG (1-1/16-12-THD)

			PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY
	Y		SEPARATE ILLUSTRATION

#SEBP50420202

227-8361: BRAKE & DIFFERENTIAL DRIVE GP

BRAKE & DIFFERENTIAL DRIVE GP

227-8361 BRAKE & DIFFERENTIAL DRIVE GP
S/N LJR1-UP
PART OF 195-0644 BRAKE GP-STEERING

i02301008 SEBP5042

2278361 BRAKE & DIFFERENTIAL DRIVE GP Parts scheme

For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2K-5069	[1]	CUP-BEARING (TAPERED ROLLER)
2.	2K-9295	[1]	BEARING AS-TAPERED ROLLER
3.	3B-4124	[1]	CUP-BEARING (TAPERED ROLLER)
4.	3S-2708	[7]	PIN-SPRING
5.	3T-4568	[3]	SHAFT-PLANETARY
6.	3T-4824	[4]	GEAR-PLANETARY (30-TEETH)
7.	3T-6963	[1]	SEAL-RING
8.	3T-9272 B	[1]	SHIM PACK (INCLUDES 8-SHIMS)
9.	5M-0578	[3]	BEARING AS-ROLLER
10.	5M-7925	[4]	BEARING AS-ROLLER
11.	6I-8724	[1]	RING-LOCK
12.	6P-1735	[1]	LOCKWASHER
13.	6P-1736	[1]	WASHER (55.17X76.2X2.67-MM THK)
14.	6T-0062	[1]	PLATE
15.	6T-0064	[4]	SHAFT-PLANETARY
16.	6T-0850	[2]	WASHER-THRUST (255X287.25X2.75-MM THK)
17.	8T-0072	[1]	CONE-BEARING
18.	104-5604	[3]	WASHER (7.2X25X2-MM THK)
19.	6Y-0926	[3]	GEAR-PLANETARY (23-TEETH)
20.	6Y-0984	[1]	GEAR-RING (75-TEETH)
21.	6Y-2704	[1]	SPRING-DISC
22.	6Y-9373	[4]	DISC-FRICTION
23.	7G-1596	[1]	RING-RETAINING
24.	7H-4566	[2]	CUP-BEARING (TAPERED ROLLER)
25.	7T-1885	[1]	RING
26.	7T-6994	[3]	PLATE-CLUTCH & BRAKE
27.	7T-8130	[1]	RING-RETAINING
28.	7T-9832	[1]	RETAINER
29.	7T-9837	[1]	PLATE
30.	8E-5277	[1]	RETAINER
31.	8E-5279	[1]	PISTON
32.	8E-8307	[6]	DISC-THRUST
33.	8E-8310	[8]	DISC-THRUST
34.	9B-0576	[1]	LOCKNUT-BEARING
35.	9W-1571	[1]	SLINGER
39.	9W-6102	[1]	GEAR-RING (84-TEETH)
40.	9W-6103	[1]	RING-THRUST
41.	005-4834	[2]	BEARING AS-TAPERED ROLLER
42.	136-1595	[1]	HOUSING-ROTATING
43.	191-0938	[1]	CARRIER-PLANETARY
44.	191-0940	[1]	CARRIER-PLANETARY
45.	292-2017	[1]	GEAR AS-SUN (30, 24-TEETH)
46.	193-7405	[1]	HUB
47.	216-6371	[1]	CARRIER
48.	226-4462	[1]	GEAR-BEVEL (74-TEETH)
49.	226-4464	[1]	PINION-BEVEL (15-TEETH)
50.	227-2451	[1]	HOUSING AS (BRAKE)
	9W-2853 B	[1]	SHIM PACK (INCLUDES 21-SHIMS)
	1A-1460	[12]	BOLT (1/2-13X2-IN)
	1A-2223	[2]	DOWEL
	5P-8245	[12]	WASHER-HARD (13.5X25.5X3-MM THK)
51.	030-2135	[4]	BOLT-LOCKING (5/16-18X0.625-IN)
52.	0L-1143	[21]	BOLT (3/8-16X2.5-IN)
53.	0S-1585	[6]	BOLT (1/2-13X1.5-IN)
54.	0S-1614	[3]	BOLT (1/4-20X0.5-IN)
55.	1A-2029	[6]	BOLT (3/8-16X1.125-IN)
56.	2A-4639	[1]	BOLT (3/8-16X1.625-IN)
57.	3K-0360	[2]	SEAL-O-RING
58.	5K-9107	[3]	BOLT-LOCKING (3/8-16X0.75-IN)
59.	5M-2894	[7]	WASHER-HARD (10.2X18.5X2.5-MM THK)
60.	5P-8245	[6]	WASHER-HARD (13.5X25.5X3-MM THK)
61.	6F-6673	[2]	SEAL-O-RING
62.	6P-5317	[1]	RING-SEAL (EXTERNAL)
63.	6Y-4003	[1]	RING-SEAL
64.	7W-6534	[4]	PLUG-PIPE
65.	8D-4771	[1]	SEAL-O-RING
66.	8M-4438	[1]	SEAL-O-RING
67.	8T-2223 M	[2]	BOLT-SOCKET HEAD (M10X1.5X45-MM)
68.	9L-9132	[3]	WASHER (10.2X25.5X2.5-MM THK)
69.	9S-8005	[2]	PLUG (3/4-16-THD)
70.	9X-2027	[2]	WASHER (11X18X2-MM THK)

	1U-8846 BF		SEALANT-GASKET
	B		USE AS REQUIRED
	F		NOT SHOWN
	M		METRIC PART

#SEBP50420203

193-4120: BRAKE & PLANETARY GP

BRAKE & PLANETARY GP

193-4120 BRAKE & PLANETARY GP
S/N LJR1-UP
PART OF 195-0644 BRAKE GP-STEERING

i01833494 SEBP5042

1934120 BRAKE & PLANETARY GP Parts scheme

For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2708	[3]	PIN-SPRING
2.	1U-8846 B		SEALANT-GASKET
3.	3T-5807	[1]	SLINGER
4.	5M-0578	[6]	BEARING AS-ROLLER
5.	6Y-2704	[1]	SPRING-DISC
6.	6Y-9373	[4]	DISC-FRICTION
7.	7T-1885	[1]	RING
8.	7T-6994	[3]	PLATE-CLUTCH & BRAKE
9.	7T-8136	[3]	SHAFT-PLANETARY
10.	7T-9031	[1]	GEAR-RING (75-TEETH)
11.	7T-9837	[1]	PLATE
12.	8E-5278	[1]	RETAINER AS
12A.	8S-0527	[1]	PLUG-CUP
13.	8E-5279	[1]	PISTON
14.	8E-8307	[6]	DISC-THRUST
15.	205-5314	[1]	HOUSING
16.	244-2310	[3]	GEAR-PLANETARY (23-TEETH)
17.	9W-7925	[2]	BEARING AS-TAPERED ROLLER
18.	9W-7926	[2]	CUP-BEARING
19.	305-2419	[1]	CARRIER-PLANETARY
20.	305-2418	[1]	GEAR AS-SUN (30-TEETH)
	3E-4354	[2]	BALL
21.	0S-1585	[18]	BOLT (1/2-13X1.5-IN)
22.	1A-2029	[6]	BOLT (3/8-16X1.125-IN)
23.	1C-0569	[6]	BOLT (5/16-18X0.5-IN)
24.	3K-0360	[2]	SEAL-O-RING
25.	5M-2894	[6]	WASHER-HARD (10.2X18.5X2.5-MM THK)
26.	5P-8245	[18]	WASHER-HARD (13.5X25.5X3-MM THK)
27.	6F-6673	[2]	SEAL-O-RING
28.	6P-5317	[1]	RING-SEAL (EXTERNAL)
29.	6Y-4003	[1]	RING-SEAL
30.	8D-4771	[1]	SEAL-O-RING
31.	8M-4438	[1]	SEAL-O-RING
32.	8T-2223 M	[2]	BOLT-SOCKET HEAD (M10X1.5X45-MM)
33.	9S-8005	[2]	PLUG (3/4-16-THD)
34.	9X-2027	[2]	WASHER (11X18X2-MM THK)
	B		USE AS REQUIRED
	M		METRIC PART

#SEBP50420204

320-6128: CASE AS-TRANSMISSION

CASE AS-TRANSMISSION

320-6128 CASE AS-TRANSMISSION
S/N KYK1-UP; T6K1-UP
PART OF 318-2545 DIFFERENTIAL & BEVEL GEAR GP, 352-9851 GEAR GP-BEVEL & TRANSFER

i03630560 SEBP5042

3206128 CASE AS-TRANSMISSION Parts scheme

For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7T-9356	[1]	PLUG-CUP
2.	320-6129	[1]	CASE AS-TRANSMISSION
	0S-1585	[18]	BOLT (1/2-13X1.5-IN)
	5H-6202	[2]	PIN
3.	2A-3576	[1]	PIN

#SEBP50420205

205-3603: CONTROL GP-TRANSMISSION HYD

CONTROL GP-TRANSMISSION HYD

205-3603 CONTROL GP-TRANSMISSION HYD
S/N T6K1-UP
PART OF 320-6127 TRANSMISSION AR

i02630106 SEBP5042

2053603 CONTROL GP-TRANSMISSION HYD Parts scheme

For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6Y-0775	[5]	SLEEVE
2.	104-6729	[1]	RETAINER
3.	104-6730	[1]	GASKET
4.	108-2097	[1]	PLATE
5.	110-2049	[2]	SLEEVE
6.	110-2860	[1]	CLIP AS-CONNECTING
7.	204-8982	[1]	GROMMET
8.	205-3602 Y	[1]	VALVE GP-RELIEF (TRANSMISSION CONTROL)
9.	220-4324 Y	[5]	VALVE GP-MODULATING (TRANSMISSION CLUTCH)
10.	278-4563 C	[1]	HARNESS AS-TRANSMISSION
	3S-2093	[5]	STRAP-CABLE
	4P-7581	[5]	CLIP (LADDER)
	155-2270	[7]	KIT-CONNECTING PLUG (2-PIN)
			(EACH INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
11.	0T-0102	[5]	BOLT (3/8-16X0.625-IN)
12.	1D-4540	[10]	BOLT (5/16-18X2.75-IN)
13.	5M-2894	[4]	WASHER-HARD (10.2X18.5X2.5-MM THK)
14.	6V-4365	[10]	SEAL-O-RING
15.	8M-4432	[4]	SEAL-O-RING
16.	8S-9191	[4]	BOLT (3/8-16X4-IN)
17.	8T-4136 M	[2]	BOLT (M10X1.5X25-MM)
18.	9M-1974	[10]	WASHER-HARD (8.8X16X2-MM THK)
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP50420206

365-6797: CONTROL GP-TRANSMISSION HYD

CONTROL GP-TRANSMISSION HYD

365-6797 CONTROL GP-TRANSMISSION HYD
S/N KYK1-UP
PART OF 365-6795 TRANSMISSION AR

i05381304 SEBP5042

3656797 CONTROL GP-TRANSMISSION HYD Parts scheme

For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	104-6729	[1]	RETAINER
2.	169-5414	[2]	CLIP
3.	244-3114 Y	[5]	VALVE GP-MODULATING (24-VOLT)(TRANSMISSION CLUTCH)
4.	365-6807 Y	[1]	VALVE GP-RELIEF (MAIN)
5.	448-2859	[2]	DRAIN
6.	365-6809	[1]	HARNESS AS-TRANSMISSION
	3S-2093	[5]	STRAP-CABLE
	4P-8134	[1]	CLIP (LADDER)
	132-5789	[3]	CLIP (LADDER)
	352-3964	[1]	CLIP (LADDER)
		[1]	HARNESS AS-TRANSMISSION
	8T-6342 E		TUBE-HEAT SHRINK (3.2-MM DIA)(46-CM)
	9X-2109 E		TUBE-HEAT SHRINK (6.4-MM DIA)(10-CM)
	9X-3402	[14]	SOCKET-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1768	[14]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	155-2270	[7]	KIT-CONNECTING PLUG (2-PIN)
	331-4226	[7]	KIT-CONNECTING PLUG (2-PIN)
			(EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
7.	0S-0509	[1]	BOLT (3/8-16X0.75-IN)
8.	104-6730	[1]	GASKET
9.	1D-4540	[14]	BOLT (5/16-18X2.75-IN)
10.	5M-2894	[1]	WASHER-HARD (10.2X18.5X2.5-MM THK)
11.	8T-4136 M	[2]	BOLT (M10X1.5X25-MM)
12.	9M-1974	[14]	WASHER-HARD (8.8X16X2-MM THK)
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP50420207

318-2545: DIFFERENTIAL & BEVEL GEAR GP

DIFFERENTIAL & BEVEL GEAR GP

318-2545 DIFFERENTIAL & BEVEL GEAR GP
S/N T6K1-UP
PART OF 320-6127 TRANSMISSION AR

i03630520 SEBP5042

3182545 DIFFERENTIAL & BEVEL GEAR GP Parts scheme

For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	205-4138	[3]	CONE-BEARING
2.	205-7397	[1]	CONE-BEARING (TAPERED ROLLER)
3.	205-7398	[1]	CUP-BEARING (TAPERED ROLLER)
4.	205-7396	[1]	CONE-BEARING (TAPERED ROLLER)
5.	2J-6362	[1]	BEARING
6.	5P-4920	[1]	RACE & ROLLER AS
7.	5P-4921	[1]	RACE-BEARING OUTER
8.	6V-1864	[1]	CUP-BEARING
9.	7T-8859	[1]	CUP-BEARING
10.	1L-6957	[1]	LOCKNUT-BEARING
11.	2D-8009	[1]	SEAL-O-RING
12.	2S-8983	[2]	RING-SEAL
13.	3L-9410	[1]	CONE-BEARING
14.	3T-9819 B	[1]	SHIM PACK (INCLUDES 19-SHIMS)
15.	6T-7995	[1]	TUBE AS
16.	6T-7996	[1]	TUBE AS
17.	6V-2404	[1]	LOCKWASHER-BEARING
18.	8D-0071	[1]	TEE-FLARED
19.	9P-7072	[1]	WASHER (90.6X115X2.5-MM THK)
20.	108-8250	[1]	CARRIER-SEAL
21.	196-1185	[2]	SENSOR GP-SPEED (TRANSMISSION OUTPUT)
			(EACH INCLUDES)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	186-3735	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	9X-1813 E		SLEEVE (14-CM)
	171-5349	[1]	STRAP-MARKER
22.	198-9162	[1]	TUBE AS
23.	198-9163	[1]	TUBE AS
24.	200-8644 B	[2]	SHIM PACK (INCLUDES 24-SHIMS)
25.	201-1281	[1]	COVER
26.	203-4786	[1]	CARRIER
27.	204-5341	[1]	TEE
28.	204-9092	[1]	SHAFT
29.	204-9096	[1]	CAGE AS
	204-8981	[1]	CAGE-BEARING
	124-6657	[1]	ORIFICE
30.	205-4137	[3]	CUP-BEARING
31.	206-2080	[1]	TUBE AS
32.	206-2963	[1]	TUBE AS
33.	225-4315	[1]	GEAR (TRANSFER, 28-TEETH)
34.	225-4316	[1]	GEAR (TRANSFER, 31-TEETH)
35.	265-2109	[1]	SET-BEVEL GEAR (31, 14-TEETH)
36.	317-8261	[1]	CAGE-BEARING
37.	318-0106	[1]	SEAL-LIP TYPE
38.	320-6128 Y	[1]	CASE AS-TRANSMISSION
39.	032-1267	[1]	CONNECTOR (STRAIGHT)
40.	032-1268	[1]	CONNECTOR (90-DEG)
41.	052-0572	[1]	TEE-SWIVEL
42.	0S-0509	[1]	BOLT (3/8-16X0.75-IN)
43.	0S-1595	[19]	BOLT (1/2-13X1.25-IN)
44.	0S-1599	[1]	BOLT (1/2-20X2.75-IN)
45.	0S-1614	[2]	BOLT (1/4-20X0.5-IN)
46.	1A-5350	[2]	CLIP
47.	1T-0720	[3]	BOLT-12 POINT HEAD (3/8-16X1.25-IN)
48.	201-1282 B	[1]	SHIM PACK (INCLUDES 25-SHIMS)
49.	2B-2404	[1]	CLIP
50.	2N-1287	[1]	ELBOW-FLARED
51.	3B-1915	[6]	BOLT (3/8-16X1.375-IN)
52.	3T-9674	[1]	RETAINER
53.	5B-0841	[20]	BOLT (5/8-18X1.75-IN)
54.	5M-2894	[1]	WASHER-HARD (10.2X18.5X2.5-MM THK)
55.	5P-0537	[2]	WASHER-HARD (7.2X14.5X2-MM THK)
56.	8L-6557	[1]	CONNECTOR
57.	8T-4136 M	[4]	BOLT (M10X1.5X25-MM)
	B		USE AS REQUIRED
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP50420208

191-4931: DRIVE GP-FINAL

DRIVE GP-FINAL

191-4931 DRIVE GP-FINAL
S/N LJR1-UP
PART OF 321-3122 POWER TRAIN AR

i01832844 SEBP5042

For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1B-3978	[6]	CUP-BEARING (TAPERED ROLLER)
2.	1B-3980	[6]	CONE-BEARING (TAPERED ROLLER)
3.	8H-0901	[1]	CUP-BEARING (TAPERED ROLLER)
4.	8H-0902	[1]	CONE-BEARING (TAPERED ROLLER)
5.	2K-5066	[1]	CONE-BEARING (TAPERED ROLLER)
6.	6V-0330	[1]	CUP-BEARING (TAPERED ROLLER)
7.	6V-0439	[1]	PLUG-MAGNETIC (FINAL DRIVE, OIL FILL)
8.	6Y-0859	[1]	SEAL GP-DUO-CONE
9.	8E-3075	[3]	RETAINER
10.	8G-4565	[3]	GEAR-PLANETARY (30-TEETH)
11.	8G-4566	[1]	PLATE
12.	8G-4568	[1]	GEAR-RING (74-TEETH)
13.	8G-4569	[1]	RING
14.	9G-4876	[1]	RETAINER
15.	106-0713	[1]	CARRIER
16.	107-1763	[1]	HUB-SPROCKET
17.	178-6854	[1]	HUB-RING GEAR
18.	179-6707	[3]	SHAFT
20.	191-4923	[1]	SPINDLE
21.	460-4832	[1]	SEAL-LIP TYPE
22.	1H-8128	[1]	SEAL-O-RING
23.	1H-9696	[3]	SEAL-O-RING
24.	2R-0098	[1]	SEAL-O-RING
25.	2S-4078	[1]	SEAL-O-RING
26.	3K-0360	[1]	SEAL-O-RING
27.	7X-2563 M	[28]	BOLT (M20X2.5X60-MM)
28.	8C-8729 M	[9]	BOLT-SOCKET HEAD (M12X1.75X80-MM)
29.	8D-4771	[1]	SEAL-O-RING
30.	8T-4121	[3]	WASHER-HARD (11X21X2.5-MM THK)
31.	8T-4123	[54]	WASHER (22X35X3.5-MM THK)
32.	8T-4136 M	[3]	BOLT (M10X1.5X25-MM)
33.	8T-4141 M	[26]	BOLT (M20X2.5X70-MM)
34.	8T-4193 M	[3]	BOLT (M16X2X50-MM)
35.	8T-4223	[11]	WASHER-HARD (13.5X25.5X3-MM THK)
36.	8T-8919	[2]	BOLT (1/2-13X1.75-IN)
37.	9S-4185	[1]	PLUG (3/4-16-THD)(FINAL DRIVE, OIL DRAIN)
38.	9X-8257	[3]	WASHER (17.5X30X3.5-MM THK)

			PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY
	M		METRIC PART

#SEBP50420209

226-1415: DRIVE GP-FINAL

DRIVE GP-FINAL

226-1415 DRIVE GP-FINAL -WASTE HANDLING
S/N LJR1-UP
PART OF 331-5318, 356-7103 GUARD AR-FINAL DRIVE
AN ATTACHMENT

i03637447 SEBP5042

For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1B-3978	[6]	CUP-BEARING (TAPERED ROLLER)
2.	1B-3980	[6]	CONE-BEARING (TAPERED ROLLER)
3.	5Q-7578	[1]	HUB AS
	1Q-4230	[1]	GUARD
		[1]	HUB-SPROCKET
4.	8H-0901	[1]	CUP-BEARING (TAPERED ROLLER)
5.	8H-0902	[1]	CONE-BEARING (TAPERED ROLLER)
6.	2K-5066	[1]	CONE-BEARING (TAPERED ROLLER)
7.	6V-0330	[1]	CUP-BEARING (TAPERED ROLLER)
8.	6V-0439	[1]	PLUG-MAGNETIC (FINAL DRIVE, OIL FILL)
9.	6Y-0859	[1]	SEAL GP-DUO-CONE
9A.	1M-9011	[2]	RING-TORIC
10.	8E-3075	[3]	RETAINER
11.	8G-4565	[3]	GEAR-PLANETARY (30-TEETH)
12.	8G-4566	[1]	PLATE
13.	8G-4568	[1]	GEAR-RING (74-TEETH)
14.	8G-4569	[1]	RING
15.	9G-4876	[1]	RETAINER
16.	106-0713	[1]	CARRIER
17.	178-6854	[1]	HUB-RING GEAR
18.	179-6707	[3]	SHAFT
20.	460-4832	[1]	SEAL-LIP TYPE
21.	226-1416	[1]	SPINDLE AS
22.	1H-8128	[1]	SEAL-O-RING
23.	1H-9696	[3]	SEAL-O-RING
24.	2R-0098	[1]	SEAL-O-RING
25.	2S-4078	[1]	SEAL-O-RING
26.	3K-0360	[1]	SEAL-O-RING
27.	7X-2563 M	[28]	BOLT (M20X2.5X60-MM)
28.	8C-8729 M	[9]	BOLT-SOCKET HEAD (M12X1.75X80-MM)
29.	8D-4771	[1]	SEAL-O-RING
30.	8T-4121	[3]	WASHER-HARD (11X21X2.5-MM THK)
31.	8T-4123	[54]	WASHER (22X35X3.5-MM THK)
32.	8T-4136 M	[3]	BOLT (M10X1.5X25-MM)
33.	8T-4141 M	[26]	BOLT (M20X2.5X70-MM)
34.	8T-4193 M	[3]	BOLT (M16X2X50-MM)
35.	8T-4223	[11]	WASHER-HARD (13.5X25.5X3-MM THK)
36.	8T-8919	[2]	BOLT (1/2-13X1.75-IN)
37.	9S-4185	[1]	PLUG (3/4-16-THD)(FINAL DRIVE, OIL DRAIN)
38.	9X-8257	[3]	WASHER (17.5X30X3.5-MM THK)
	M		METRIC PART