POWER TRAIN
TRANSMISSION GPOPERATOR STATION
CONTROL GP-STEERINGPOWER TRAIN
CONTROL GP-TRANSMISSION HYDCOOLER GP
COUPLING GP
DRIVE GP-FINAL
POWER TRAIN
TRANSMISSION GP
#SEBP50440320
379-0863: CASE GP-TRANSMISSION
379-0863 CASE GP-TRANSMISSION
S/N A5F1-UP; TYM355-UP
PART OF 379-0860 CASE GP-TRANSMISSION
AN ATTACHMENT
S/N A5F1-UP; TYM355-UP
PART OF 379-0860 CASE GP-TRANSMISSION
AN ATTACHMENT
For full view, you need register
Parts for your D7R II TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4B-9785 | [1] | BALL | |
| 2. | 1A-2610 | [1] | DOWEL | |
| 3. | 7M-1201 | [1] | DOWEL | |
| 4. | 3F-3442 | [2] | DOWEL | |
| 5. | 4B-9782 | [1] | BALL | |
| 6. | 146-6669 | [1] | GASKET | |
| 7. | 146-6670 | [1] | COVER | |
| 8. | 9X-6458 | [6] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 9. | 0S-1594 | [6] | BOLT (3/8-16X1-IN) | |
| 196-8884 F | [1] | BRACKET AS | ||
| 8C-3334 F | [2] | RIVET-TUBULAR | ||
| 124-9401 F | [4] | CLIP (TAB) | ||
| 0S-1620 F | [1] | BOLT (1/2-13X0.75-IN) | ||
| 5P-8245 F | [1] | WASHER-HARD (13.5X25.5X3-MM THK) | ||
| F | NOT SHOWN | |||
#SEBP50440321
226-9713: CONTROL GP-STEERING & XMSN
226-9713 CONTROL GP-STEERING & XMSN
S/N KNA1-UP
PART OF 279-6627 CONTROL GP-STEERING & XMSN
ALSO AN ATTACHMENT
S/N KNA1-UP
PART OF 279-6627 CONTROL GP-STEERING & XMSN
ALSO AN ATTACHMENT
For full view, you need register
Parts for your D7R II TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8T-4896 | [2] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 2. | 5D-3546 | [1] | COLLAR | |
| 3. | 5L-2029 | [1] | BALL BEARING | |
| 4. | 6T-8387 | [1] | BEARING | |
| 5. | 6T-8388 | [2] | FLANGE | |
| 6. | 107-3881 Y | [1] | CONTROL GP-PARKING BRAKE | |
| 7. | 112-4440 | [1] | HOUSING | |
| 8. | 127-1598 | [1] | GASKET | |
| 9. | 127-1599 | [1] | GASKET | |
| 10. | 143-6871 | [1] | SPACER (26.93X31.75X58-MM THK) | |
| 11. | 7K-1181 C | [7] | STRAP-CABLE | |
| 12. | 158-6161 | [1] | SHAFT AS | |
| 13. | 161-3963 | [1] | SUPPORT AS | |
| 14. | 161-3964 | [1] | COVER AS | |
| 15. | 166-9212 | [1] | LEVER | |
| 16. | 355-0692 C | [1] | PLATE | |
| 17. | 201-9624 | [1] | HOUSING-MAIN | |
| 18. | 224-9450 Y | [1] | CONTROL GP-HANDLE (STEERING, TRANSMISSION) | |
| 19. | 226-9673 | [1] | HARNESS AS-WIRING | |
| 9G-3695 | [75] | PLUG-SEAL | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(20-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM) | |||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(35-CM) | |||
| 144-1636 | [14] | PIN-CONNECTOR (14-GA TO 18-GA) | ||
| 134-2540 | [1] | RECEPTACLE AS-CONNECTOR (3-PIN) | ||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| 166-5229 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| (EACH KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 147-1445 | [1] | PLUG AS-CONNECTOR (70-PIN) | ||
| 147-1446 | [1] | PLUG AS-CONNECTOR (70-PIN) | ||
| 160-7689 | [1] | PLUG AS-CONNECTOR (70-PIN) | ||
| 159-9322 | [1] | SEAL-O-RING | ||
| 155-2271 | [1] | KIT-CONNECTING PLUG (4-PIN) | ||
| 155-2255 | [2] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2274 | [2] | KIT-CONNECTING PLUG (6-PIN) | ||
| 174-0503 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| (EACH KIT INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 20. | 030-8537 | [1] | BOLT-LOCKING (3/8-16X1.5-IN) | |
| 21. | 149-3137 | [1] | LOCK GP-CYLINDER | |
| 5P-9000 J | [1] | LOCK AS-CYLINDER | ||
| 226-0336 | [1] | CAM | ||
| 23. | 2N-3680 | [3] | SCREW-HEAD (1/4-20X0.75-IN) | |
| 24. | 4H-9105 | [1] | SEAL-O-RING | |
| 25. | 4L-9337 | [2] | BOLT (3/8-16X1.5-IN) | |
| 26. | 4M-5282 | [4] | BOLT (1/4-20X1.5-IN) | |
| 28. | 5P-1075 | [5] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 29. | 5S-7379 | [5] | BOLT (3/8-16X0.875-IN) | |
| 30. | 7X-7729 | [7] | WASHER (11X25X3-MM THK) | |
| 31. | 8T-4137 M | [7] | BOLT (M10X1.5X20-MM) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| J | REQUIRES CORPORATE KEY | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP50440322
279-6627: CONTROL GP-STEERING & XMSN
279-6627 CONTROL GP-STEERING & XMSN
S/N KNA1-UP
PART OF 376-7613 COMMON AR, 279-3351 POWER TRAIN AR
ALSO AN ATTACHMENT
S/N KNA1-UP
PART OF 376-7613 COMMON AR, 279-3351 POWER TRAIN AR
ALSO AN ATTACHMENT
For full view, you need register
Parts for your D7R II TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-4374 | [2] | STUD (3/8-24X3.15-IN) | |
| 2. | 6V-8183 | [2] | NUT-FULL (3/8-24-THD) | |
| 3. | 7P-4190 | [2] | BEARING-ROLLER | |
| 4. | 1B-0676 | [2] | PIN | |
| 5. | 136-6093 | [1] | SEAL | |
| 6. | 313-9374 | [1] | LINK AS | |
| 7. | 166-9204 | [1] | SHAFT | |
| 8. | 166-9209 | [1] | BRACKET | |
| 9. | 319-1676 | [1] | LEVER | |
| 10. | 166-9213 | [1] | ROD | |
| 11. | 298-7340 | [1] | LEVER | |
| 12. | 226-9713 Y | [1] | CONTROL GP-STEERING & XMSN | |
| 13. | 292-0486 | [1] | PLUG AS-CODE (POWER TRAIN) | |
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 9G-3695 | [1] | PLUG-SEAL | ||
| 114-8843 E | SLEEVE-PLASTIC (20-CM) | |||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM) | |||
| 9X-3401 | [5] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [5] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 5P-5677 D | WIRE (18-GA, BLACK)(3.5-M) | |||
| 14. | 1B-8706 | [2] | KEY-WOODRUFF | |
| 15. | 1M-1341 | [2] | END-YOKE ROD | |
| 16. | 3B-4615 | [3] | PIN-COTTER | |
| 17. | 7X-7729 | [11] | WASHER (11X25X3-MM THK) | |
| 18. | 8T-4137 M | [8] | BOLT (M10X1.5X20-MM) | |
| 19. | 8T-4195 M | [3] | BOLT (M10X1.5X30-MM) | |
| 20. | 8T-4196 M | [2] | BOLT (M10X1.5X35-MM) | |
| 21. | 8T-4896 | [2] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 22. | 8T-4994 | [2] | WASHER-HARD (20X36.5X3.5-MM THK) | |
| 23. | 3E-2954 | [4] | PLUG-DOMED HEAD | |
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP50440323
265-5278: CONTROL GP-TRANSMISSION HYD
265-5278 CONTROL GP-TRANSMISSION HYD
S/N A5F1-UP; TYM355-UP; DGW1-UP
PART OF 223-2451, 379-0858 TRANSMISSION AR
ALSO AN ATTACHMENT
S/N A5F1-UP; TYM355-UP; DGW1-UP
PART OF 223-2451, 379-0858 TRANSMISSION AR
ALSO AN ATTACHMENT
For full view, you need register
Parts for your D7R II TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5K-5120 | [2] | STRIP | |
| 2. | 6P-4977 | [2] | SLEEVE | |
| 3. | 104-6729 | [1] | RETAINER | |
| 4. | 104-6730 | [1] | GASKET | |
| 5. | 204-6501 | [1] | ELBOW | |
| 6. | 205-7205 | [5] | SLEEVE | |
| 7. | 213-4540 Y | [1] | VALVE GP-RELIEF (MAIN) | |
| 8. | 220-4324 Y | [5] | VALVE GP-MODULATING (TRANSMISSION CLUTCH) | |
| 9. | 263-4081 | [1] | HARNESS AS-SENSOR | |
| 3S-2093 | [6] | STRAP-CABLE | ||
| 4P-7581 | [5] | CLIP (LADDER) | ||
| 4P-8134 | [1] | CLIP (LADDER) | ||
| 6J-2419 | [1] | SEAL-O-RING | ||
| 155-2270 | [7] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 10. | 031-0218 | [2] | BOLT-LOCKING (3/8-16X0.5-IN) | |
| 11. | 0L-1352 | [3] | BOLT (3/8-16X3.25-IN) | |
| 12. | 0S-0509 | [2] | BOLT (3/8-16X0.75-IN) | |
| 13. | 1D-4540 | [10] | BOLT (5/16-18X2.75-IN) | |
| 14. | 2H-3932 | [2] | SEAL-O-RING | |
| 15. | 5F-4899 | [4] | BOLT (3/8-16X5.5-IN) | |
| 16. | 5M-2894 | [9] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 17. | 8M-4432 | [4] | SEAL-O-RING | |
| 18. | 8M-8157 | [10] | SEAL-O-RING | |
| 19. | 9M-1974 | [10] | WASHER-HARD (8.8X16X2-MM THK) | |
| 20. | 9X-2125 M | [2] | BOLT-LOCKING (M10X1.5X25-MM) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP50440324
161-4347: COOLER GP-TRANSMISSION OIL
161-4347 COOLER GP-TRANSMISSION OIL
S/N 7ZR25952-UP
PART OF 347-6911 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
S/N 7ZR25952-UP
PART OF 347-6911 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
For full view, you need register
Parts for your D7R II TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2S-0795 | [2] | GASKET | |
| 2. | 166-8598 | [1] | CORE AS (TRANSMISSION OIL COOLER) | |
| 3. | 183-4693 | [1] | BRACKET | |
| 4. | 193-2454 | [1] | BONNET | |
| 5. | 0S-1587 | [5] | BOLT (1/2-13X1.75-IN) | |
| 6. | 0S-1595 | [4] | BOLT (1/2-13X1.25-IN) | |
| 7. | 3E-4353 | [2] | WASHER-HARD (11X25X3-MM THK) | |
| 8. | 5P-8245 | [8] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 9. | 6V-1820 M | [2] | BOLT (M10X1.5X30-MM) | |
| 10. | 8S-9089 | [1] | BOLT (1/2-13X4.5-IN) | |
| 11. | 9X-8873 | [2] | BOLT (1/2-13X2.25-IN) | |
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
#SEBP50440325
272-2928: COUPLING & GUARD GP
272-2928 COUPLING & GUARD GP
S/N KNA1-UP
PART OF 376-7613 COMMON AR, 279-3351 POWER TRAIN AR
ALSO AN ATTACHMENT
S/N KNA1-UP
PART OF 376-7613 COMMON AR, 279-3351 POWER TRAIN AR
ALSO AN ATTACHMENT
For full view, you need register
Parts for your D7R II TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9W-3364 | [1] | GUARD AS | |
| 1F-0750 | [4] | NUT-WELD (3/8-16-THD) | ||
| 7T-1099 | [3] | LINK | ||
| 2. | 9W-3365 | [1] | BRACKET AS | |
| 3. | 9W-3366 | [1] | GUARD AS | |
| 1F-0748 | [2] | NUT-WELD (1/2-13-THD) | ||
| 1F-0750 | [2] | NUT-WELD (3/8-16-THD) | ||
| 4. | 227-0925 Y | [1] | COUPLING GP-PUMP | |
| 5. | 4L-6454 | [10] | BOLT (3/8-16X1-IN) | |
| 6. | 5P-1075 | [10] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| Y | SEPARATE ILLUSTRATION | |||
#SEBP50440326
227-0925: COUPLING GP-PUMP
227-0925 COUPLING GP-PUMP
S/N KNA1-UP
PART OF 272-2928 COUPLING & GUARD GP
ALSO AN ATTACHMENT
S/N KNA1-UP
PART OF 272-2928 COUPLING & GUARD GP
ALSO AN ATTACHMENT
For full view, you need register
Parts for your D7R II TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 196-2126 | [1] | TUBE AS | |
| 2. | 211-9087 | [2] | COUPLING AS | |
| (EACH INCLUDES) | ||||
| 2A. | 6Y-2130 | [3] | BUSHING AS | |
| (EACH INCLUDES) | ||||
| 8E-5170 | [1] | SLEEVE | ||
| 2B. | 211-9085 | [3] | BUSHING AS | |
| 3. | 8T-4121 | [12] | WASHER-HARD (11X21X2.5-MM THK) | |
| 4. | 8T-4182 M | [6] | BOLT (M10X1.5X45-MM) | |
| 5. | 8T-4185 M | [6] | BOLT (M10X1.5X50-MM) | |
| M | METRIC PART | |||
#SEBP50440327
383-8731: DRIVE GP-FINAL
383-8731 DRIVE GP-FINAL -DESERT TAN COLOR
S/N KNA355-UP
PART OF 383-8749 CONFIGURATION AR
AN ATTACHMENT
S/N KNA355-UP
PART OF 383-8749 CONFIGURATION AR
AN ATTACHMENT
For full view, you need register
Parts for your D7R II TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3T-5923 | [1] | RETAINER | |
| 2. | 3T-5926 | [1] | COVER | |
| 3. | 3T-5928 | [1] | GEAR (24-TEETH) | |
| 4. | 3T-5929 | [1] | GEAR (18-TEETH) | |
| 5. | 4B-3693 | [6] | RACE & ROLLER AS-INNER | |
| 6. | 5F-2465 | [1] | CUP-BEARING | |
| 7. | 6T-1746 | [1] | HUB-REACTION | |
| 8. | 6T-2394 | [1] | HUB-SPINDLE | |
| 9. | 6V-3298 | [1] | PLUG-MAGNETIC (FINAL DRIVE, OIL FILL, CHECK) | |
| 10. | 6Y-0859 | [1] | SEAL GP-DUO-CONE | |
| 1M-9011 | [2] | RING-TORIC | ||
| 11. | 7G-5684 | [1] | CARRIER-PLANETARY | |
| 12. | 7G-5777 | [3] | COVER | |
| 13. | 7G-5780 | [3] | SHAFT-PLANETARY | |
| 14. | 7G-5783 | [3] | GEAR (18-TEETH) | |
| 15. | 7G-5784 | [3] | GEAR-PLANETARY (21-TEETH) | |
| 16. | 7G-5831 | [1] | RING-RETAINING | |
| 17. | 7G-5832 | [1] | RETAINER | |
| 18. | 7G-5833 | [1] | GEAR (63-TEETH) | |
| 19. | 7G-5837 | [1] | HUB-SPROCKET | |
| 20. | 7T-2530 | [2] | RING-THRUST | |
| 21. | 7T-2531 | [1] | CARRIER-PLANETARY | |
| 22. | 9W-3232 | [1] | RETAINER | |
| 23. | 269-4739 | [1] | SEAL-LIP TYPE | |
| 24. | 034-3557 | [6] | BOLT-LOCKING (3/8-16X1.125-IN) | |
| 25. | 090-3093 | [3] | SEAL-QUAD RING | |
| 26. | 2P-1370 | [6] | CUP-BEARING | |
| 27. | 2S-4078 | [1] | SEAL-O-RING | |
| 28. | 3K-0360 | [1] | SEAL-O-RING | |
| 29. | 5F-7054 | [1] | SEAL-O-RING | |
| 30. | 5H-3193 | [3] | PIN-SPRING | |
| 31. | 5K-8454 | [15] | BOLT (1/2-13X1.12-IN) | |
| 32. | 5P-8472 | [1] | RING-RETAINING | |
| 33. | 6T-2173 | [15] | PIN | |
| 34. | 6V-0661 | [6] | CONE-BEARING | |
| 35. | 6V-0662 | [1] | CUP-BEARING | |
| 36. | 6V-0663 | [1] | CONE-BEARING | |
| 37. | 6V-0664 | [1] | CONE-BEARING | |
| 38. | 7G-5776 | [3] | SHAFT-PLANETARY | |
| 39. | 7X-0366 | [29] | BOLT (3/4-10X2-IN) | |
| 40. | 8J-1665 | [1] | SEAL-O-RING | |
| 41. | 8T-4223 | [3] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 42. | 8T-4896 | [6] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 43. | 8T-4994 | [29] | WASHER-HARD (20X36.5X3.5-MM THK) | |
| 44. | 8T-8917 | [3] | BOLT (1/2-13X1.25-IN) | |
| 45. | 9H-0846 | [1] | SEAL-O-RING | |
| 46. | 9S-4185 | [1] | PLUG (3/4-16-THD)(FINAL DRIVE, OIL DRAIN) | |
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
#SEBP50440328
383-8765: DRIVE GP-FINAL
383-8765 DRIVE GP-FINAL -GREEN COLOR
S/N KNA355-UP
PART OF 383-8778 CONFIGURATION AR
AN ATTACHMENT
S/N KNA355-UP
PART OF 383-8778 CONFIGURATION AR
AN ATTACHMENT
For full view, you need register
Parts for your D7R II TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3T-5923 | [1] | RETAINER | |
| 2. | 3T-5926 | [1] | COVER | |
| 3. | 3T-5928 | [1] | GEAR (24-TEETH) | |
| 4. | 3T-5929 | [1] | GEAR (18-TEETH) | |
| 5. | 4B-3693 | [6] | RACE & ROLLER AS-INNER | |
| 6. | 5F-2465 | [1] | CUP-BEARING | |
| 7. | 6T-1746 | [1] | HUB-REACTION | |
| 8. | 6T-2394 | [1] | HUB-SPINDLE | |
| 9. | 6V-3298 | [1] | PLUG-MAGNETIC (FINAL DRIVE, OIL FILL, CHECK) | |
| 10. | 6Y-0859 | [1] | SEAL GP-DUO-CONE | |
| 1M-9011 | [2] | RING-TORIC | ||
| 11. | 7G-5684 | [1] | CARRIER-PLANETARY | |
| 12. | 7G-5777 | [3] | COVER | |
| 13. | 7G-5780 | [3] | SHAFT-PLANETARY | |
| 14. | 7G-5783 | [3] | GEAR (18-TEETH) | |
| 15. | 7G-5784 | [3] | GEAR-PLANETARY (21-TEETH) | |
| 16. | 7G-5831 | [1] | RING-RETAINING | |
| 17. | 7G-5832 | [1] | RETAINER | |
| 18. | 7G-5833 | [1] | GEAR (63-TEETH) | |
| 19. | 7G-5837 | [1] | HUB-SPROCKET | |
| 20. | 7T-2530 | [2] | RING-THRUST | |
| 21. | 7T-2531 | [1] | CARRIER-PLANETARY | |
| 22. | 9W-3232 | [1] | RETAINER | |
| 23. | 269-4739 | [1] | SEAL-LIP TYPE | |
| 24. | 034-3557 | [6] | BOLT-LOCKING (3/8-16X1.125-IN) | |
| 25. | 090-3093 | [3] | SEAL-QUAD RING | |
| 26. | 2P-1370 | [6] | CUP-BEARING | |
| 27. | 2S-4078 | [1] | SEAL-O-RING | |
| 28. | 3K-0360 | [1] | SEAL-O-RING | |
| 29. | 5F-7054 | [1] | SEAL-O-RING | |
| 30. | 5H-3193 | [3] | PIN-SPRING | |
| 31. | 5K-8454 | [15] | BOLT (1/2-13X1.12-IN) | |
| 32. | 5P-8472 | [1] | RING-RETAINING | |
| 33. | 6T-2173 | [15] | PIN | |
| 34. | 6V-0661 | [6] | CONE-BEARING | |
| 35. | 6V-0662 | [1] | CUP-BEARING | |
| 36. | 6V-0663 | [1] | CONE-BEARING | |
| 37. | 6V-0664 | [1] | CONE-BEARING | |
| 38. | 7G-5776 | [3] | SHAFT-PLANETARY | |
| 39. | 7X-0366 | [29] | BOLT (3/4-10X2-IN) | |
| 40. | 8J-1665 | [1] | SEAL-O-RING | |
| 41. | 8T-4223 | [3] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 42. | 8T-4896 | [6] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 43. | 8T-4994 | [29] | WASHER-HARD (20X36.5X3.5-MM THK) | |
| 44. | 8T-8917 | [3] | BOLT (1/2-13X1.25-IN) | |
| 45. | 9H-0846 | [1] | SEAL-O-RING | |
| 46. | 9S-4185 | [1] | PLUG (3/4-16-THD)(FINAL DRIVE, OIL DRAIN) | |
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
#SEBP50440329
9W-0593: DRIVE GP-FINAL
9W-0593 DRIVE GP-FINAL
S/N KNA1-354
PART OF 470-6805 PARTS GP-MISCELLANEOUS, 279-3351 POWER TRAIN AR
ALSO AN ATTACHMENT
S/N KNA1-354
PART OF 470-6805 PARTS GP-MISCELLANEOUS, 279-3351 POWER TRAIN AR
ALSO AN ATTACHMENT
For full view, you need register
Parts for your D7R II TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3T-5923 | [1] | RETAINER | |
| 2. | 3T-5926 | [1] | COVER | |
| 3. | 3T-5928 | [1] | GEAR (24-TEETH) | |
| 4. | 3T-5929 | [1] | GEAR (18-TEETH) | |
| 5. | 4B-3693 | [6] | RACE & ROLLER AS-INNER | |
| 6. | 5F-2465 | [1] | CUP-BEARING | |
| 7. | 6T-1746 | [1] | HUB-REACTION | |
| 8. | 6T-2394 | [1] | HUB-SPINDLE | |
| 9. | 6V-3298 | [1] | PLUG-MAGNETIC (FINAL DRIVE, OIL FILL, CHECK) | |
| 10. | 6Y-0859 | [1] | SEAL GP-DUO-CONE | |
| 1M-9011 | [2] | RING-TORIC | ||
| 11. | 7G-5684 | [1] | CARRIER-PLANETARY | |
| 12. | 7G-5777 | [3] | COVER | |
| 13. | 7G-5780 | [3] | SHAFT-PLANETARY | |
| 14. | 7G-5783 | [3] | GEAR (18-TEETH) | |
| 15. | 7G-5784 | [3] | GEAR-PLANETARY (21-TEETH) | |
| 16. | 7G-5831 | [1] | RING-RETAINING | |
| 17. | 7G-5832 | [1] | RETAINER | |
| 18. | 7G-5833 | [1] | GEAR (63-TEETH) | |
| 19. | 7G-5837 | [1] | HUB-SPROCKET | |
| 20. | 7T-2530 | [2] | RING-THRUST | |
| 21. | 7T-2531 | [1] | CARRIER-PLANETARY | |
| 22. | 9W-3232 | [1] | RETAINER | |
| 23. | 269-4739 | [1] | SEAL-LIP TYPE | |
| 24. | 034-3557 | [6] | BOLT-LOCKING (3/8-16X1.125-IN) | |
| 25. | 090-3093 | [3] | SEAL-QUAD RING | |
| 26. | 2P-1370 | [6] | CUP-BEARING | |
| 27. | 2S-4078 | [1] | SEAL-O-RING | |
| 28. | 3K-0360 | [1] | SEAL-O-RING | |
| 29. | 5F-7054 | [1] | SEAL-O-RING | |
| 30. | 5H-3193 | [3] | PIN-SPRING | |
| 31. | 5K-8454 | [15] | BOLT (1/2-13X1.12-IN) | |
| 32. | 5P-8472 | [1] | RING-RETAINING | |
| 33. | 6T-2173 | [15] | PIN | |
| 34. | 6V-0661 | [6] | CONE-BEARING | |
| 35. | 6V-0662 | [1] | CUP-BEARING | |
| 36. | 6V-0663 | [1] | CONE-BEARING | |
| 37. | 6V-0664 | [1] | CONE-BEARING | |
| 38. | 7G-5776 | [3] | SHAFT-PLANETARY | |
| 39. | 7X-0366 | [29] | BOLT (3/4-10X2-IN) | |
| 40. | 8J-1665 | [1] | SEAL-O-RING | |
| 41. | 8T-4223 | [3] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 42. | 8T-4896 | [6] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 43. | 8T-4994 | [29] | WASHER-HARD (20X36.5X3.5-MM THK) | |
| 44. | 8T-8917 | [3] | BOLT (1/2-13X1.25-IN) | |
| 45. | 9H-0846 | [1] | SEAL-O-RING | |
| 46. | 9S-4185 | [1] | PLUG (3/4-16-THD)(FINAL DRIVE, OIL DRAIN) | |
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
