391-8256 KIT-CYLINDER HEAD GASKET S/N 5HM1-UP CONTAINS THE GASKETS, SEALS, AND BENDABLE LOCKS TO REBUILD AND REINSTALL A SINGLE CYLINDER HEAD.. INCLUDES THE TURBO GASKETS BUT DOES NOT INCLUDE THE FUEL INJECTOR SEALS. ORDER A SINGLE INJECTOR SEAL KIT AS NEEDED.. FOR IN-LINE 4 AND 6 CYLINDER ENGINES WITH ONE CYLINDER HEAD ONLY.. THE FOLLOWING TURBO MOUNTING HARDWARE WILL BE INCLUDED: BOLTS, NUTS, STUDS, WASHERS, SPACERS, ETC.. APPLIES TO SINGLE CYLINDER HEAD KIT PART NUMBERS 317-8750 & UP FOR USE WITH @@@@@110-1607@@@@@, @@@@@266-9815@@@@@, @@@@@266-9815@@@@@ FIELD INSTALLATION 140H

BASIC ENGINE

CYLINDER HEAD GP

• 0. 391-8256 KIT-CYLIND
• 1. 392-0637 KIT-CYLIND
• 2. 447-8653 KIT-CYLIND

HOUSING GP-FRONT

• 3. 460-8225 KIT-FRONT

LIFTING GP-ENGINE

• 4. 7N-9122 LIFTING GP

AIR COMPRESSOR GP

• 5. 128-0065 LINES GP-A
• 6. 135-5094 LINES GP-A

MOUNTING GP-ENGINE

• 7. 7C-2096 MOUNTING G

PAN GP-OIL

• 8. 2P-9647 PAN GP-OIL

PISTON & ROD GP

• 9. 1W-6588 PISTON & R
• 0. INFORMATION

MOTOR GRADER 140H MOTOR GRADER 5HM
140H Motor Grader 5HM00001-UP (MACHINE) POWERED BY 3306B Engine SEBP5051 140H 5HM   (1996)

BASIC ENGINE

CYLINDER HEAD GP

2P-6530 COVER GP-CYLINDER HEAD

7N-8876 CYLINDER HEAD GP

7N-9536 FASTENER GP-CYLINDER HEAD

398-9357 KIT-CYLINDER HEAD

391-8256 KIT-CYLINDER HEAD GASKET

392-0637 KIT-CYLINDER HEAD GASKET

447-8653 KIT-CYLINDER HEAD GASKET

 

#SEBP50510040

 

391-8256: KIT-CYLINDER HEAD GASKET

KIT-CYLINDER HEAD GASKET

391-8256 KIT-CYLINDER HEAD GASKET
S/N 5HM1-UP
CONTAINS THE GASKETS, SEALS, AND BENDABLE LOCKS TO REBUILD AND REINSTALL A SINGLE CYLINDER HEAD.. INCLUDES THE TURBO GASKETS BUT DOES NOT INCLUDE THE FUEL INJECTOR SEALS. ORDER A SINGLE INJECTOR SEAL KIT AS NEEDED.. FOR IN-LINE 4 AND 6 CYLINDER ENGINES WITH ONE CYLINDER HEAD ONLY.. THE FOLLOWING TURBO MOUNTING HARDWARE WILL BE INCLUDED: BOLTS, NUTS, STUDS, WASHERS, SPACERS, ETC.. APPLIES TO SINGLE CYLINDER HEAD KIT PART NUMBERS 317-8750 & UP
FOR USE WITH @@@@@110-1607@@@@@, @@@@@266-9815@@@@@, @@@@@266-9815@@@@@
FIELD INSTALLATION

i05106251 SEBP5051

  For full view, you need register

Parts for your 140H MOTOR GRADER:

Pos.	Part No	Qty	Parts name	Comments
	8M-2295	[4]	BOLT (3/8-16X1.625-IN)
	1H-7666	[1]	GASKET
	1P-0451	[1]	GASKET (TURBOCHARGER)
	1S-4295	[1]	GASKET (TURBOCHARGER)
	5S-6735	[2]	GASKET
	7N-0200	[1]	GASKET
	7N-0944	[1]	GASKET (WATER TEMPERATURE REGULATOR)
	8H-9788	[1]	GASKET
	188-6126	[1]	GASKET
	111-8015	[1]	GASKET AS-CYLINDER HEAD
	2P-6132	[1]	GASKET-ELBOW
	9S-7083	[1]	GASKET-INLET
	9Y-1979	[3]	GASKET-MANIFOLD
	1S-4810	[1]	GASKET-OIL DRAIN
	1S-6595	[1]	GASKET-OIL SUPPLY
	115-7550	[1]	GASKET-PLATE
	2N-2766	[4]	LOCKNUT (3/8-16-THD)
	7N-8018	[6]	SEAL
	9Y-1798	[18]	SEAL
	2M-9780	[1]	SEAL-O-RING
	3J-1907	[1]	SEAL-O-RING
	3J-7354	[1]	SEAL-O-RING
	3K-0360	[1]	SEAL-O-RING
	3S-5496	[2]	SEAL-O-RING
	4L-8337	[2]	SEAL-O-RING
	5M-5860	[2]	SEAL-O-RING
	5H-7704	[2]	SEAL-O-RING
	8H-2046	[1]	SEAL-O-RING
	8M-4448	[1]	SEAL-O-RING
	9M-4849	[1]	SEAL-O-RING
	133-1247	[1]	SEAL-VALVE COVER
			FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT
			HTTP://DEALER.CAT.COM/RELATED
	8H-9204	[6]	WASHER-FELT (19/32X7/8X5/16-IN THK)

 

#SEBP50510041

 

392-0637: KIT-CYLINDER HEAD GASKET

KIT-CYLINDER HEAD GASKET

392-0637 KIT-CYLINDER HEAD GASKET
S/N 5HM1-UP
KIT CONTAINS GASKETS, SEALS, AND BENDABLE LOCKS TO REBUILD AND REINSTALL A SINGLE CYLINDER HEAD.. KIT INCLUDES TURBO GASKETS. KIT DOES NOT INCLUDE THE FUEL INJECTOR SEALS. ORDER A SINGLE INJECTOR SEAL KIT AS NEEDED.. FOR IN-LINE 4 AND 6 CYLINDER ENGINES WITH ONE CYLINDER HEAD ONLY. KIT INCLUDES TURBO MOUNTING HARDWARE
FOR USE WITH @@@@@110-1607@@@@@
FIELD INSTALLATION

i06146420 SEBP5051

  For full view, you need register

Parts for your 140H MOTOR GRADER:

Pos.	Part No	Qty	Parts name	Comments
	7L-6443	[2]	BOLT-HIGH TEMPERATURE (3/8-16X2.25-IN)
	9L-2295	[2]	BOLT-HIGH TEMPERATURE (3/8-16X1.5-IN)
	1H-7666	[1]	GASKET
	1P-0451	[1]	GASKET
	5S-6735	[2]	GASKET
	7N-0200	[1]	GASKET
	7N-0944	[1]	GASKET
	2F-7761	[1]	GASKET
	188-6126	[1]	GASKET
	111-8015	[1]	GASKET AS-CYLINDER HEAD
	2P-6132	[1]	GASKET-ELBOW
	9Y-1979	[3]	GASKET-MANIFOLD
	1P-1255	[1]	GASKET-OIL DRAIN
	115-7550	[1]	GASKET-PLATE
	391-2167	[4]	LOCKNUT-FLANGE (3/8X16-THD)
	6N-0009	[1]	RING-METAL SEAL
	6N-0992	[1]	RING-METAL SEAL
	7N-8018	[6]	SEAL
	9Y-1798	[18]	SEAL
	3K-0360	[2]	SEAL-O-RING
	3J-1907	[1]	SEAL-O-RING
	3J-7354	[1]	SEAL-O-RING
	3S-5496	[2]	SEAL-O-RING
	8H-2046	[1]	SEAL-O-RING
	8M-4448	[1]	SEAL-O-RING
	133-1247	[1]	SEAL-VALVE COVER
	8H-9204	[6]	WASHER-FELT (19/32X7/8X5/16-IN THK)
			FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT
			HTTP://DEALER.CAT.COM/RELATED

 

#SEBP50510042

 

447-8653: KIT-CYLINDER HEAD GASKET

KIT-CYLINDER HEAD GASKET

447-8653 KIT-CYLINDER HEAD GASKET
S/N 5HM1-UP
CLASSIC KIT IS SERVICED ONLY AS A COMPLETE PACKAGE
FIELD INSTALLATION

i06805361 SEBP5051

  For full view, you need register

Parts for your 140H MOTOR GRADER:

Pos.	Part No	Qty	Parts name	Comments
			(NO SERVICED PARTS)
			FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT
			HTTP://DEALER.CAT.COM/RELATED

 

#SEBP50510043

 

460-8225: KIT-FRONT COVER GASKET

KIT-FRONT COVER GASKET

460-8225 KIT-FRONT COVER GASKET
S/N 5HM1-UP
KIT CONTAINS GASKETS, SEALS AND BENDABLE LOCKS TO REINSTALL THE FRONT COVER. KIT DOES NOT INCLUDE THE OIL PAN GASKET.
FOR USE WITH @@@@@266-9815@@@@@
FIELD INSTALLATION

i05940042 SEBP5051

  For full view, you need register

Parts for your 140H MOTOR GRADER:

Pos.	Part No	Qty	Parts name	Comments
	1W-3900	[1]	GASKET
	2P-2720	[1]	GASKET
	6L-1883	[2]	GASKET
	8N-0110	[1]	GASKET-FRONT PLATE
	6N-7887	[1]	GASKET-HOUSING COVER
	2P-0220	[1]	GASKET-PUMP
	362-8853	[1]	SEAL GP-CRANKSHAFT (CLOCKWISE ROTATION)
	6V-9748	[1]	SEAL-LIP TYPE
	175-7900	[1]	SEAL-O-RING
	2M-9780	[1]	SEAL-O-RING
	2P-1692	[1]	SEAL-O-RING
	3J-1907	[1]	SEAL-O-RING
	3K-0360	[1]	SEAL-O-RING
	175-7904	[2]	SEAL-O-RING
	6V-6921	[1]	SEAL-RING
			FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT
			HTTP://DEALER.CAT.COM/RELATED

 

#SEBP50510044

 

7N-9122: LIFTING GP-ENGINE

LIFTING GP-ENGINE

7N-9122 LIFTING GP-ENGINE
S/N 6NC1-33951; 8TD10000-99999; R6J1-UP; 08Z96265-99999; 10Z1-UP
PART OF 110-1607, 116-4605, 266-9815 ENGINE AR

i00125351 SEBP5051

  For full view, you need register

Parts for your 140H MOTOR GRADER:

Pos.	Part No	Qty	Parts name	Comments
1.	137-5314	[1]	PLATE-LIFTING
2.	8N-8721	[1]	PLATE-LIFTING EYE
3.	0S-1566	[4]	BOLT (5/8-11X1.5-IN)
	5P-8247	[4]	WASHER-HARD (17X32X3.5-MM THK)

 

#SEBP50510045

 

128-0065: LINES GP-AIR COMPRESSOR

LINES GP-AIR COMPRESSOR

128-0065 LINES GP-AIR COMPRESSOR
S/N 5HM1-799
PART OF 126-5235 INSTALLATION AR-ENGINE

i00666323 SEBP5051

  For full view, you need register

Parts for your 140H MOTOR GRADER:

Pos.	Part No	Qty	Parts name	Comments
1.	5K-9237	[4]	ELBOW-FLARED
2.	032-1269	[1]	ELBOW
3.	3B-7255	[3]	BUSHING-REDUCER
4.	7W-9553	[1]	TUBE AS-OUTLET
5.	4W-1309 I	[1]	HOSE AS
6.	7E-6796	[1]	TUBE AS
7.	6K-1972	[1]	ELBOW-FLARED
8.	9N-3040 I	[1]	HOSE AS
9.	2N-1287	[1]	ELBOW-FLARED
10.	9L-5254	[1]	ELBOW
11.	3P-1823 B	[1]	ADAPTER-PIPE
12.	3B-7764	[1]	BUSHING (REDUCING)
	B		USE AS REQUIRED
	I		REFER TO HYDRAULIC INFORMATION SYSTEM

 

#SEBP50510046

 

135-5094: LINES GP-AIR COMPRESSOR

LINES GP-AIR COMPRESSOR

135-5094 LINES GP-AIR COMPRESSOR
S/N 6NC1-33951; R6J1-UP; 08Z96265-99999; 10Z1-UP
PART OF 110-1607, 266-9815 ENGINE AR

i00671979 SEBP5051

  For full view, you need register

Parts for your 140H MOTOR GRADER:

Pos.	Part No	Qty	Parts name	Comments
1.	9L-5810 I	[1]	HOSE AS
2.	2N-3378	[3]	ELBOW-FLARED
3.	4P-5970 I	[1]	HOSE AS
4.	146-7639	[1]	HOSE AS
5.	2N-1287	[1]	ELBOW-FLARED
6.	9N-3040 I	[1]	HOSE AS
7.	6K-1972	[1]	ELBOW-FLARED
8.	3B-7764	[1]	BUSHING (REDUCING)
9.	8T-6757	[5]	PLUG-PIPE
10.	9M-4584	[1]	CONNECTOR
11.	2M-9780	[1]	SEAL-O-RING
12.	1D-4541	[2]	BOLT (5/16-18X3-IN)
13.	9M-6522	[1]	CONNECTOR (1/2-14 NPTF)
14.	8M-0755	[1]	ADAPTER
15.	9M-1974	[4]	WASHER-HARD (8.8X16X2-MM THK)
16.	6I-1240	[1]	GOVERNOR AS-AIR COMPRESSOR
	2S-2923	[1]	COVER AS
	9M-0402	[1]	KIT-GOVERNOR OVERHAUL (AIR COMPRESSOR)
			(INCLUDES GROMMETS, FILTERS, SPRINGS, VALVE, COVER, RING & GASKET)
17.	6L-1883	[2]	GASKET
18.	4B-3388	[2]	BOLT (5/16-18X1.125-IN)
19.	136-3166	[1]	ADAPTER
20.	3P-1823 B	[1]	ADAPTER-PIPE
21.	5F-5434	[1]	VALVE AS-VENT
22.	030-7972	[1]	ELBOW
	B		USE AS REQUIRED
	I		REFER TO HYDRAULIC INFORMATION SYSTEM

 

#SEBP50510047

 

7C-2096: MOUNTING GP-ENGINE & XMSN

MOUNTING GP-ENGINE & XMSN

7C-2096 MOUNTING GP-ENGINE & XMSN
S/N 5HM1-UP
PART OF 123-4192, 126-5235, 256-1274 INSTALLATION AR-ENGINE

i00125283 SEBP5051

  For full view, you need register

Parts for your 140H MOTOR GRADER:

Pos.	Part No	Qty	Parts name	Comments
1.	9W-9920	[2]	MOUNTING AS-VIBRATION ISOLATOR
2.	9W-6582	[2]	SLEEVE
3.	9W-6584	[4]	WASHER (20.5X114X10-MM THK)
4.	8T-4994	[2]	WASHER-HARD (20X36.5X3.5-MM THK)
5.	7X-0375	[2]	BOLT (3/4-10X5-IN)
6.	9W-7385	[2]	SLEEVE
7.	6Y-9960	[2]	MOUNT AS
			(EACH INCLUDES)
	9W-8095	[1]	PAD-REBOUND
8.	9W-7388	[4]	WASHER (26X144X12-MM THK)
9.	8T-5361	[2]	WASHER-HARD (28X49X5-MM THK)
10.	8T-6430 M	[8]	BOLT (M20X2.5X50-MM)
11.	8T-4123	[8]	WASHER (22X35X3.5-MM THK)
12.	1J-5929	[2]	BOLT (1-8X6-IN)
13.	211-9274	[1]	SUPPORT (RH)
14.	211-9275	[1]	SUPPORT (LH)
15.	9B-7237	[12]	BOLT (3/8-16X1.25-IN)
16.	8T-4896	[12]	WASHER-HARD (10.2X18.5X2.5-MM THK)
	M		METRIC PART

 

#SEBP50510048

 

2P-9647: PAN GP-OIL

PAN GP-OIL

2P-9647 PAN GP-OIL
S/N 6NC1-33951; 8TD10000-99999; R6J1-UP; 08Z96265-99999; 10Z1-UP
PART OF 110-1607, 116-4605, 266-9815 ENGINE AR

i00125148 SEBP5051

  For full view, you need register

Parts for your 140H MOTOR GRADER:

Pos.	Part No	Qty	Parts name	Comments
1.	4M-2969	[1]	GASKET-PAN PLATE
2.	8S-1965	[1]	GASKET-OIL PAN
3.	2Y-9326	[1]	PAN-OIL
4.	3B-1915	[2]	BOLT (3/8-16X1.375-IN)
5.	8N-6854	[1]	GASKET
6.	113-5336	[1]	ADAPTER AS-DRAIN
7.	5N-8780	[1]	PLUG-DRAIN (ENGINE OIL PAN)
8.	2P-1738	[1]	PLATE AS-OIL PAN
	1S-5304	[1]	LUG
	6J-2237	[7]	BOSS-WELD

 

#SEBP50510049

 

1W-6588: PISTON & ROD GP

PISTON & ROD GP

1W-6588 PISTON & ROD GP
S/N 6NC1-33951; 8TD10000-99999; R6J1-UP; 08Z96265-99999; 10Z1-UP
PART OF 110-1607, 116-4605, 266-9815 ENGINE AR

i00125130 SEBP5051

  For full view, you need register

Parts for your 140H MOTOR GRADER:

Pos.	Part No	Qty	Parts name	Comments
1.	164-6560	[1]	BODY AS-PISTON (REQUIRES 4MM THICK OIL RING)
2.	9S-3029	[1]	RING-PISTON (TOP)
3.	5S-6750	[1]	RING-PISTON (INTERMEDIATE)
4.	6I-0497	[1]	RING-PISTON (OIL)(4MM THICK)
5.	1S-9543	[2]	RETAINER-PIN
6.	7N-9805	[1]	PIN-PISTON
7.	8N-1721	[1]	ROD AS-CONNECTING
	8N-1849	[1]	BEARING-CONNECTING ROD
	1P-9956	[2]	BOLT-CONNECTING ROD
	5S-6348	[2]	NUT (1/2-20-THD)
8.	328-5572	[1]	BEARING-CONNECTING ROD (STANDARD)
	8N-8221 AB		BEARING-CONNECTING ROD (0.254-MM US)
	8N-8222 AB		BEARING-CONNECTING ROD (0.508-MM US)
	8N-8223 AB		BEARING-CONNECTING ROD (0.762-MM US)
	A		NOT PART OF THIS GROUP
	B		USE AS REQUIRED
	R		REMANUFACTURED PART MAY BE AVAILABLE

 

Information:

BASIC ENGINE

CYLINDER HEAD GP

Tool Operating Manual

Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}

Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}

185-5321 Cylinder Head Lifting Hook Assembly{0599, 0632, 0703, 1101, 6459}
185-5321 Cylinder Head Lifting Hook Assembly{0599, 0632, 0703, 1101, 6459}

188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}

CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}

Reuse And Salvage Guidelines

Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}

Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}

Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}

Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}

Applied Failure Analysis

Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}

Disassembly and Assembly

Inlet and Exhaust Valves - Remove and Install
3304B and 3306B Engines for Caterpillar Built Machines

Inlet and Exhaust Valve Guides - Remove and Install
3304B and 3306B Engines for Caterpillar Built Machines

Inlet and Exhaust Valve Seat Inserts - Remove and Install
3304B and 3306B Engines for Caterpillar Built Machines

Cylinder Head - Remove
3304B and 3306B Engines for Caterpillar Built Machines

Camshaft Bearings - Remove and Install
3304B and 3306B Engines for Caterpillar Built Machines

Cylinder Head - Install
3304B and 3306B Engines for Caterpillar Built Machines

Service Magazine

New Specification for Reusability of the Intake Valves and Exhaust Valves {1105}
2002/05/13

Caterpillar Warranty Claims on Cylinder Head Valves {1105}
2005/10/03

Later Pre-Chamber Cylinder Heads On Early 3304 Engines Without Drilled Rocker Stands Are Used {1100}
2012/10/11

Caterpillar Parts SIS Catalog 140H :

398-9357 KIT-CYLINDER HEAD

8N-0303 HOUSING GP-FRONT

7E-5681 HOUSING GP-FLYWHEEL

1W-5634 GEAR GP-FRONT

111-8001 GEAR GP-FRONT

7E-5680 FLYWHEEL GP

2P-6200 FASTENER GP-OIL PAN

170-2496 FASTENER GP-OIL PAN

392-0637 KIT-CYLINDER HEAD GASKET

447-8653 KIT-CYLINDER HEAD GASKET

460-8225 KIT-FRONT COVER GASKET

7N-9122 LIFTING GP-ENGINE

128-0065 LINES GP-AIR COMPRESSOR

135-5094 LINES GP-AIR COMPRESSOR

7C-2096 MOUNTING GP-ENGINE & XMSN

2P-9647 PAN GP-OIL

Truck sale:

 

 

Caterpillar 140H
- motor graders
WESTERN STATES EQUIPMENT

93,628 

Caterpillar 140H, motor graders, Construction
- motor graders
FINANZAUTO S.A.

97,900 

Caterpillar 140H, motor graders, Construction
- motor graders
N C MACHINERY CO.

99,500 

Caterpillar 140H, motor graders, Construction
- motor graders
PETERSON CAT

95,000 

Caterpillar 140H, motor graders, Construction
- motor graders
WAGNER EQUIPMENT CO