115-0811 VALVE & LINKAGE GP -4-BANK, RH; 4-BANK, LH S/N 5HM1-UP AN ATTACHMENT 140H MOTOR GRADER



HYDRAULIC SYSTEM
VALVE & LINKAGE GP
VALVE GP-BANK

MOTOR GRADER 140H MOTOR GRADER 5HM
 140H Motor Grader 5HM00001-UP (MACHINE) POWERED BY 3306B Engine SEBP5051 140H 5HM   (1996)

HYDRAULIC SYSTEM

VALVE & LINKAGE GP
VALVE & LINKAGE GP
115-0808 VALVE & LINKAGE GP
VALVE & LINKAGE GP
115-0810 VALVE & LINKAGE GP
VALVE & LINKAGE GP
115-0811 VALVE & LINKAGE GP
VALVE & LINKAGE GP
115-0812 VALVE & LINKAGE GP
VALVE & LINKAGE GP
130-0464 VALVE & LINKAGE GP
VALVE & LINKAGE GP
130-7603 VALVE & LINKAGE GP
 

#SEBP50510500
 

115-0811: VALVE & LINKAGE GP

115-0811 VALVE & LINKAGE GP -4-BANK, RH; 4-BANK, LH
S/N 5HM1-UP
AN ATTACHMENT
i00125875 SEBP5051
1150811 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 140H MOTOR GRADER:

Pos. Part No Qty Parts name Comments
1. 124-3325 Y [1] VALVE GP-BANK 4 (RH)  
2. 124-3327 Y [1] VALVE GP-BANK 4 (LH)(LH)  
3. 8X-5498 [2] RETAINER  
4. 101-2457 [1] LEVER (ARTICULATION)  
5. 8D-5634 [1] LEVER (CENTER SHIFT)  
6. 6V-8186 [16] NUT-FULL (5/16-24-THD)  
  7H-3641 [16] END-ROD (5/16-24-THD)  
  8X-4276 [8] ROD  
7. 8D-5633 [1] LEVER (WHEEL LEAN)  
8. 101-2458 [1] LEVER (BLADE TIP)  
9. 137-4515 [2] BUSHING  
10. 8D-5640 [10] BEARING  
11. 8D-5636 B [4] SHIM (0.254-MM THK)  
12. 8D-5637 B [4] SHIM (0.762-MM THK)  
13. 6L-1962 [8] NUT-JAM (3/8-24-THD)  
14. 8T-9043 [16] BOLT (5/16-18X0.875-IN)  
15. 3F-9556 [16] LOCKWASHER  
16. 9B-7237 [2] BOLT (3/8-16X1.25-IN)  
17. 8D-5641 [8] BEARING  
18. 2G-6757 [1] KNOB-BLADE LIFT (LH)  
19. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
20. 2G-6749 [1] KNOB-SIDESHIFT  
21. 2G-6747 [1] KNOB-BLADE TIP  
22. 8D-5632 [1] LEVER (BLADE LIFT-RH)  
23. 2G-6751 [1] KNOB-CIRCLE DRIVE  
24. 2G-6748 [1] KNOB-BLADE LIFT (RH)  
25. 2G-6756 [1] KNOB-WHEEL LEAN  
26. 2G-6752 [1] KNOB-ARTICULATION  
27. 2G-6755 [1] KNOB-CENTERSHIFT  
28. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
29. 9M-1853 [6] MOUNTING  
30. 5P-1076 [6] WASHER-HARD (13.5X30X4-MM THK)  
31. 104-7740 [1] PLATE AS (LH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
32. 104-7419 [1] PLATE AS (RH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
33. 104-7429 [2] PLATE  
34. 137-4516 [1] SHAFT  
35. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
36. 6B-0933 [4] SPACER (10.31X19.05X6.35-MM THK)  
37. 5P-2424 [6] BOLT (1/2-13X2.25-IN)  
38. 6V-8188 [2] NUT (1/2-13-THD)  
39. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
40. 8F-6437 [6] WASHER (13.5X50.8X4.76-MM THK)  
41. 8D-5634 [1] LEVER (BLADE LIFT-LH)  
42. 8D-5633 [1] LEVER (SIDE SHIFT)  
43. 8D-5632 [1] LEVER (CIRCLE DRIVE)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP50510501
 

115-0812: VALVE & LINKAGE GP

115-0812 VALVE & LINKAGE GP -5-BANK, RH, LH
S/N 5HM1-UP
PART OF 115-1011 CONTROL AR-HYDRAULIC
AN ATTACHMENT
i00125876 SEBP5051
1150812 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 140H MOTOR GRADER:

Pos. Part No Qty Parts name Comments
1. 8X-5499 [2] RETAINER  
2. 101-2457 [1] LEVER (ARTICULATION)  
3. 8D-5634 [1] LEVER (CENTER SHIFT)  
4. 4L-6459 [1] BOLT (3/8-16X2.5-IN)  
5. 8W-0456 [1] SHAFT  
6. 6V-8186 [20] NUT-FULL (5/16-24-THD)  
  7H-3641 [20] END-ROD (5/16-24-THD)  
  8X-4276 [10] ROD  
7. 8D-5633 [1] LEVER (WHEEL LEAN)  
8. 101-2458 [1] LEVER (PLOW & BULLDOZER LIFT)  
9. 137-4515 [2] BUSHING  
10. 8D-5640 [12] BEARING  
11. 8D-5636 B [4] SHIM (0.254-MM THK)  
12. 8D-5637 B [4] SHIM (0.762-MM THK)  
13. 6L-1962 [10] NUT-JAM (3/8-24-THD)  
14. 8T-9043 [20] BOLT (5/16-18X0.875-IN)  
15. 3F-9556 [20] LOCKWASHER  
16. 9B-7237 [1] BOLT (3/8-16X1.25-IN)  
17. 8D-5641 [10] BEARING  
18. 2G-6757 [1] KNOB-BLADE LIFT (LH)  
19. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
20. 2G-6749 [1] KNOB-SIDESHIFT  
21. 2G-6747 [1] KNOB-BLADE TIP  
22. 8D-5632 [1] LEVER (BLADE LIFT-RH)  
23. 2G-6751 [1] KNOB-CIRCLE DRIVE  
24. 2G-6748 [1] KNOB-BLADE LIFT (RH)  
25. 2G-6756 [1] KNOB-WHEEL LEAN  
26. 2G-6752 [1] KNOB-ARTICULATION  
27. 2G-6755 [1] KNOB-CENTERSHIFT  
28. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
29. 9M-1853 [6] MOUNTING  
30. 5P-1076 [6] WASHER-HARD (13.5X30X4-MM THK)  
31. 104-7740 [1] PLATE AS (LH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
32. 104-7419 [1] PLATE AS (RH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
33. 104-7429 [2] PLATE  
34. 137-4516 [1] SHAFT  
35. 2G-6740 [1] KNOB-RIPPER  
36. 2G-6754 [1] KNOB (BULLDOZER LIFT, PLOW)  
37. 6V-8188 [2] NUT (1/2-13-THD)  
38. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
39. 8F-6437 [6] WASHER (13.5X50.8X4.76-MM THK)  
40. 5P-2424 [6] BOLT (1/2-13X2.25-IN)  
41. 6B-0933 [4] SPACER (10.31X19.05X6.35-MM THK)  
42. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
43. 124-3326 Y [1] VALVE GP-BANK 5 (RH)  
44. 124-3329 Y [1] VALVE GP-BANK 5 (LH)(LH)  
45. 8D-5632 [1] LEVER (CIRCLE DRIVE)  
46. 101-2458 [1] LEVER (BLADE TIP)  
47. 8D-5633 [1] LEVER (SIDE SHIFT)  
48. 101-2457 [1] LEVER (RIPPER)  
49. 8D-5634 [1] LEVER (BLADE LIFT-LH)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP50510502
 

130-0464: VALVE & LINKAGE GP

130-0464 VALVE & LINKAGE GP -4-BANK, RH, LH
S/N 5HM1-UP
AN ATTACHMENT
i00126218 SEBP5051
1300464 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 140H MOTOR GRADER:

Pos. Part No Qty Parts name Comments
1. 124-3325 Y [1] VALVE GP-BANK 4 (RH)  
2. 130-7754 Y [1] VALVE GP-BANK 4 (LH)  
3. 8X-5499 [2] RETAINER  
4. 101-2457 [1] LEVER (ARTICULATION)  
5. 8D-5634 [1] LEVER (CENTER SHIFT)  
6. 8X-4276 [8] ROD  
  6V-8186 [2] NUT-FULL (5/16-24-THD)  
  7H-3641 [2] END-ROD (5/16-24-THD)  
7. 8D-5633 [1] LEVER (WHEEL LEAN)  
8. 8D-8852 [1] SPACER (0.78X1.5X1.344-IN THK)  
9. 137-4515 [2] BUSHING  
10. 8D-5640 [11] BEARING  
11. 8D-5636 B [4] SHIM (0.254-MM THK)  
12. 8D-5637 B [4] SHIM (0.762-MM THK)  
13. 6L-1962 [8] NUT-JAM (3/8-24-THD)  
14. 8T-9043 [16] BOLT (5/16-18X0.875-IN)  
15. 3F-9556 [16] LOCKWASHER  
16. 9B-7237 [2] BOLT (3/8-16X1.25-IN)  
17. 8D-5641 [9] BEARING  
18. 2G-6757 [1] KNOB-BLADE LIFT (LH)  
19. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
20. 2G-6749 [1] KNOB-SIDESHIFT  
21. 8D-5632 [1] LEVER (BLADE LIFT)  
22. 2G-6751 [1] KNOB-CIRCLE DRIVE  
23. 2G-6748 [1] KNOB-BLADE LIFT (RH)  
24. 2G-6756 [1] KNOB-WHEEL LEAN  
25. 2G-6752 [1] KNOB-ARTICULATION  
26. 2G-6755 [1] KNOB-CENTERSHIFT  
27. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
28. 9M-1853 [6] MOUNTING  
29. 5P-1076 [6] WASHER-HARD (13.5X30X4-MM THK)  
30. 104-7740 [1] PLATE AS (LH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
31. 104-7419 [1] PLATE AS (RH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
32. 104-7429 [2] PLATE  
33. 137-4516 [1] SHAFT  
34. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
35. 6B-0933 [4] SPACER (10.31X19.05X6.35-MM THK)  
36. 5P-2424 [6] BOLT (1/2-13X2.25-IN)  
37. 6V-8188 [2] NUT (1/2-13-THD)  
38. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
39. 2G-6753 [1] KNOB-SCARIFIER  
40. 8F-6437 [6] WASHER (13.5X50.8X4.76-MM THK)  
41. 101-2457 [1] LEVER (SCARIFER)  
42. 8D-5634 [1] LEVER (BLADE LIFT)  
43. 8D-5633 [1] LEVER (SIDE SHIFT)  
44. 8D-5632 [1] LEVER (CIRCLE DRIVE)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP50510503
 

130-7603: VALVE & LINKAGE GP

130-7603 VALVE & LINKAGE GP -4-BANK, RH, LH
S/N 5HM1-UP
PART OF 130-0463 CONTROL AR-HYDRAULIC
AN ATTACHMENT
i00126242 SEBP5051
1307603 VALVE & LINKAGE GP Parts scheme
  For full view, you need register

Parts for your 140H MOTOR GRADER:

Pos. Part No Qty Parts name Comments
1. 124-3325 Y [1] VALVE GP-BANK 4 (RH)  
2. 130-7755 Y [1] VALVE GP-BANK 4 (LH)  
3. 8X-5499 [2] RETAINER  
4. 101-2457 [1] LEVER (ARTICULATION)  
5. 8D-5634 [1] LEVER (CENTER SHIFT)  
6. 8X-4276 [8] ROD  
  6V-8186 [16] NUT-FULL (5/16-24-THD)  
  7H-3641 [16] END-ROD (5/16-24-THD)  
7. 8D-5633 [1] LEVER (WHEEL LEAN)  
8. 8D-8852 [1] SPACER (0.78X1.5X1.344-IN THK)  
9. 137-4515 [2] BUSHING  
10. 8D-5640 [11] BEARING  
11. 8D-5636 B [4] SHIM (0.254-MM THK)  
12. 8D-5637 B [4] SHIM (0.762-MM THK)  
13. 6L-1962 [8] NUT-JAM (3/8-24-THD)  
14. 8T-9043 [16] BOLT (5/16-18X0.875-IN)  
15. 3F-9556 [16] LOCKWASHER  
16. 9B-7237 [2] BOLT (3/8-16X1.25-IN)  
17. 8D-5641 [9] BEARING  
18. 2G-6757 [1] KNOB-BLADE LIFT (LH)  
19. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
20. 2G-6749 [1] KNOB-SIDESHIFT  
21. 8D-5632 [1] LEVER (BLADE LIFT)  
22. 2G-6751 [1] KNOB-CIRCLE DRIVE  
23. 2G-6748 [1] KNOB-BLADE LIFT (RH)  
24. 2G-6756 [1] KNOB-WHEEL LEAN  
25. 2G-6752 [1] KNOB-ARTICULATION  
26. 2G-6755 [1] KNOB-CENTERSHIFT  
27. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
28. 9M-1853 [6] MOUNTING  
29. 5P-1076 [6] WASHER-HARD (13.5X30X4-MM THK)  
30. 104-7740 [1] PLATE AS (LH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
31. 104-7419 [1] PLATE AS (RH)  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
32. 104-7429 [2] PLATE  
33. 137-4516 [1] SHAFT  
34. 2G-6740 [1] KNOB-RIPPER  
35. 6B-0933 [4] SPACER (10.31X19.05X6.35-MM THK)  
36. 5P-2424 [6] BOLT (1/2-13X2.25-IN)  
37. 6V-8188 [2] NUT (1/2-13-THD)  
38. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
39. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
40. 8F-6437 [6] WASHER (13.5X50.8X4.76-MM THK)  
41. 101-2457 [1] LEVER (RIPPER)  
42. 8D-5634 [1] LEVER (BLADE LIFT)  
43. 8D-5633 [1] LEVER (SIDE SHIFT)  
44. 8D-5632 [1] LEVER (CIRCLE DRIVE)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP50510504
 

104-8672: VALVE GP-BANK 2

104-8672 VALVE GP-BANK 2 -LH
S/N 5HM1-UP
PART OF 112-6795 VALVE & LINKAGE GP
i00125639 SEBP5051
1048672 VALVE GP-BANK 2 Parts scheme
  For full view, you need register

Parts for your 140H MOTOR GRADER:

Pos. Part No Qty Parts name Comments
1. 7X-2546 M [2] BOLT (M10X1.5X180-MM)  
2. 137-6720 M [1] BOLT (M10X1.5X160-MM)  
3. 102-8385 [1] MANIFOLD  
4. 101-0509 [5] SEAL-INTEGRAL  
5. 124-2883 Y [1] VALVE GP-CONTROL (BLADE LIFT)  
6. 111-9321 [2] SPACER  
7. 6E-3035 Y [1] VALVE GP-CONTROL (CIRCLE DRIVE)  
8. 101-9346 [1] COVER  
9. 8T-4186 M [3] BOLT (M10X1.5X40-MM)  
10. 222-4737 [1] PLUG AS  
  9S-4180 [1] PLUG  
  4J-7533 [1] SEAL-O-RING  
11. 8T-4896 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP50510505
 

104-8673: VALVE GP-BANK 3

104-8673 VALVE GP-BANK 3 -LH
S/N 5HM1-UP
PART OF 112-6799 VALVE & LINKAGE GP
AN ATTACHMENT
i00125640 SEBP5051
1048673 VALVE GP-BANK 3 Parts scheme
  For full view, you need register

Parts for your 140H MOTOR GRADER:

Pos. Part No Qty Parts name Comments
1. 7X-2546 M [2] BOLT (M10X1.5X180-MM)  
2. 137-6720 M [1] BOLT (M10X1.5X160-MM)  
3. 102-8385 [1] MANIFOLD  
4. 101-0509 [5] SEAL-INTEGRAL  
5. 124-2883 Y [1] VALVE GP-CONTROL (BLADE LIFT)  
6. 6E-3036 Y [1] VALVE GP-CONTROL (SIDESHIFT)  
7. 6E-3035 Y [1] VALVE GP-CONTROL (CIRCLE DRIVE)  
8. 111-9321 [1] SPACER  
9. 101-9346 [1] COVER  
10. 8T-4186 M [3] BOLT (M10X1.5X40-MM)  
11. 222-4737 [1] PLUG AS  
  9S-4180 [1] PLUG  
  4J-7533 [1] SEAL-O-RING  
12. 8T-4896 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP50510506
 

112-2580: VALVE GP-BANK 3

112-2580 VALVE GP-BANK 3 -LH
S/N 5HM1-UP
PART OF 112-6804 VALVE & LINKAGE GP
AN ATTACHMENT
i00488412 SEBP5051
1122580 VALVE GP-BANK 3 Parts scheme
  For full view, you need register

Parts for your 140H MOTOR GRADER:

Pos. Part No Qty Parts name Comments
1. 7X-2546 M [2] BOLT (M10X1.5X180-MM)  
2. 137-6720 M [1] BOLT (M10X1.5X160-MM)  
3. 102-8385 [1] MANIFOLD  
4. 101-0509 [6] SEAL-INTEGRAL  
5. 111-9321 [2] SPACER  
6. 6E-3035 Y [1] VALVE GP-CONTROL (CIRCLE DRIVE)  
7. 124-2883 Y [1] VALVE GP-CONTROL (BLADE LIFT)  
8. 107-0543 Y [1] VALVE GP-CONTROL (SCARIFIER)  
9. 101-9346 [1] COVER  
10. 222-4737 [1] PLUG AS  
  9S-4180 [1] PLUG  
  4J-7533 [1] SEAL-O-RING  
11. 8T-4896 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
12. 137-6719 M [3] BOLT (M10X1.5X80-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP50510507
 

112-2581: VALVE GP-BANK 3

112-2581 VALVE GP-BANK 3 -LH
S/N 5HM1-UP
PART OF 112-6818 VALVE & LINKAGE GP
AN ATTACHMENT
i00488423 SEBP5051
1122581 VALVE GP-BANK 3 Parts scheme
  For full view, you need register

Parts for your 140H MOTOR GRADER:

Pos. Part No Qty Parts name Comments
1. 7X-2546 M [2] BOLT (M10X1.5X180-MM)  
2. 137-6720 M [1] BOLT (M10X1.5X160-MM)  
3. 102-8385 [1] MANIFOLD  
4. 101-0509 [6] SEAL-INTEGRAL  
5. 111-9321 [2] SPACER  
6. 6E-3035 Y [1] VALVE GP-CONTROL (CIRCLE DRIVE)  
7. 124-2883 Y [1] VALVE GP-CONTROL (BLADE LIFT)  
8. 107-0545 Y [1] VALVE GP-CONTROL (RIPPER, LH)(RIPPER)  
9. 101-9346 [1] COVER  
10. 222-4737 [1] PLUG AS  
  9S-4180 [1] PLUG  
  4J-7533 [1] SEAL-O-RING  
11. 8T-4896 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
12. 137-6719 M [3] BOLT (M10X1.5X80-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP50510508
 

124-3325: VALVE GP-BANK 4

124-3325 VALVE GP-BANK 4 -RH
S/N 5HM1-UP
PART OF 112-6795, 112-6799, 112-6804, 112-6818, 115-0804, 115-0808, 115-0811, 130-0464, 130-7603 VALVE & LINKAGE GP
ALSO AN ATTACHMENT
i00126115 SEBP5051
1243325 VALVE GP-BANK 4 Parts scheme
  For full view, you need register

Parts for your 140H MOTOR GRADER:

Pos. Part No Qty Parts name Comments
1. 7X-2546 M [2] BOLT (M10X1.5X180-MM)  
2. 8T-6408 M [1] BOLT (M10X1.5X160-MM)  
3. 102-6238 [1] MANIFOLD  
4. 101-0509 [5] SEAL-INTEGRAL  
5. 6E-3028 Y [1] VALVE GP-CONTROL (ARTICULATION)  
6. 6E-3029 Y [1] VALVE GP-CONTROL (CENTERSHIFT)  
7. 6E-3030 Y [1] VALVE GP-CONTROL (WHEEL LEAN)  
8. 124-2884 Y [1] VALVE GP-CONTROL (BLADE LIFT)  
9. 101-9346 [1] COVER  
10. 8T-4186 M [3] BOLT (M10X1.5X40-MM)  
11. 366-4696 [1] PLUG AS  
  [1] PLUG (5/16-24-THD)  
  4J-7533 [1] SEAL-O-RING  
12. 8T-4896 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP50510509
 

124-3327: VALVE GP-BANK 4

124-3327 VALVE GP-BANK 4 -LH
S/N 5HM1-UP
PART OF 115-0811 VALVE & LINKAGE GP
AN ATTACHMENT
i00126117 SEBP5051
1243327 VALVE GP-BANK 4 Parts scheme
  For full view, you need register

Parts for your 140H MOTOR GRADER:

Pos. Part No Qty Parts name Comments
1. 7X-2546 M [2] BOLT (M10X1.5X180-MM)  
2. 137-6720 M [1] BOLT (M10X1.5X160-MM)  
3. 102-8385 [1] MANIFOLD  
4. 101-0509 [5] SEAL-INTEGRAL  
5. 124-2883 Y [1] VALVE GP-CONTROL (BLADE LIFT)  
6. 6E-3036 Y [1] VALVE GP-CONTROL (SIDESHIFT)  
7. 6E-3035 Y [1] VALVE GP-CONTROL (CIRCLE DRIVE)  
8. 6E-3034 Y [1] VALVE GP-CONTROL (BLADE TIP)  
9. 101-9346 [1] COVER  
10. 8T-4186 M [3] BOLT (M10X1.5X40-MM)  
11. 8T-4896 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
12. 222-4737 [1] PLUG AS  
  4J-7533 [1] SEAL-O-RING  
  9S-4180 [1] PLUG  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Caterpillar Parts SIS Catalog 140H :

VALVE & LINKAGE GP
115-0810 VALVE & LINKAGE GP
VALVE & LINKAGE GP
115-0808 VALVE & LINKAGE GP
VALVE & LINKAGE GP
115-0804 VALVE & LINKAGE GP
VALVE & LINKAGE GP
112-6818 VALVE & LINKAGE GP
VALVE & LINKAGE GP
112-6804 VALVE & LINKAGE GP
VALVE & LINKAGE GP
112-6799 VALVE & LINKAGE GP
VALVE & LINKAGE GP
112-6795 VALVE & LINKAGE GP
UNIVERSAL JOINT GP-PUMP DRIVE
5Y-0769 UNIVERSAL JOINT GP-PUMP DRIVE
VALVE & LINKAGE GP
115-0812 VALVE & LINKAGE GP
VALVE & LINKAGE GP
130-0464 VALVE & LINKAGE GP
VALVE & LINKAGE GP
130-7603 VALVE & LINKAGE GP
VALVE GP-BANK 2
104-8672 VALVE GP-BANK 2
VALVE GP-BANK 3
104-8673 VALVE GP-BANK 3
VALVE GP-BANK 3
112-2580 VALVE GP-BANK 3
VALVE GP-BANK 3
112-2581 VALVE GP-BANK 3
VALVE GP-BANK 4
124-3325 VALVE GP-BANK 4

Truck sale:

 
 
Caterpillar 140H
- motor graders
WESTERN STATES EQUIPMENT
Caterpillar 140H, motor graders, Construction
93,628 
Caterpillar 140H, motor graders, Construction
- motor graders
FINANZAUTO S.A.
Caterpillar 140H, motor graders, Construction
97,900 
Caterpillar 140H, motor graders, Construction
- motor graders
N C MACHINERY CO.
Caterpillar 140H, motor graders, Construction
99,500 
Caterpillar 140H, motor graders, Construction
- motor graders
PETERSON CAT
Caterpillar 140H, motor graders, Construction
95,000 
Caterpillar 140H, motor graders, Construction
- motor graders
WAGNER EQUIPMENT CO