775F OEM Off-Highway Truck EYG00001-UP (MACHINE) POWERED BY C27 Engine BASIC ENGINE Caterpillar SIS

TRUCK 775F TRUCK EYG
775F OEM Off-Highway Truck EYG00001-UP (MACHINE) POWERED BY C27 Engine SEBP5052 775F EYG (2009)

Parts group 775F:

For full view, you need register

BASIC ENGINE

BELT TIGHTENER GP

253-4792 BELT TENSIONER GP

253-4792 BELT TENSIONER GP
S/N EYG1-UP
PART OF 228-0001 DRIVE GP-ACCESSORY

ENGINE BRAKE GP

313-4622 ACTUATOR AS-VALVE

313-4622 ACTUATOR AS-VALVE
S/N LJX72-UP
PART OF 255-7955 ACTUATOR GP-VALVE
AN ATTACHMENT

377-8599 ACTUATOR AS-VALVE

377-8599 ACTUATOR AS-VALVE
S/N LJX1445-UP
24-VOLT. CAT BRAKE
PART OF 379-3929 ACTUATOR GP-VALVE
AN ATTACHMENT

255-7955 ACTUATOR GP-VALVE

255-7955 ACTUATOR GP-VALVE
S/N LJX72-UP
PART OF 262-4028, 350-5508 ENGINE AR-CORE
AN ATTACHMENT

379-3929 ACTUATOR GP-VALVE

379-3929 ACTUATOR GP-VALVE
S/N LJX1445-UP
PART OF 350-5508 ENGINE AR-CORE
AN ATTACHMENT

CAMSHAFT GP

260-9306 CAMSHAFT GP

260-9306 CAMSHAFT GP
S/N LJX72-300
PART OF 262-4028 ENGINE AR-CORE
AN ATTACHMENT

260-9306 CAMSHAFT GP

260-9306 CAMSHAFT GP
S/N LJX77-UP
PART OF 262-4027, 350-5493, 350-5508 ENGINE AR-CORE
AN ATTACHMENT

COMPRESSOR GP-REFRIGERANT

259-5861 MOUNTING GP-ALTERNATOR & COMPR

259-5861 MOUNTING GP-ALTERNATOR & COMPR
S/N LJX72-UP
PART OF 227-5354, 262-3742, 361-8104 ENGINE AR-COMPLETE
AN ATTACHMENT

CRANKSHAFT GP

225-6052 CRANKSHAFT GP

225-6052 CRANKSHAFT GP
S/N LJX72-UP
PART OF 262-4027, 262-4028, 350-5493, 350-5508 ENGINE AR-CORE
AN ATTACHMENT

319-0785 SEAL GP-CRANKSHAFT

319-0785 SEAL GP-CRANKSHAFT -REAR
S/N LJX72-UP
PART OF 226-0297, 302-4288 HOUSING GP-FLYWHEEL
FOR USE WITH CCW ROTATION
AN ATTACHMENT

319-7401 SEAL GP-CRANKSHAFT

319-7401 SEAL GP-CRANKSHAFT -FRONT
S/N LJX77-UP
PART OF 225-6052 CRANKSHAFT GP
FOR USE WITH CW ROTATION
AN ATTACHMENT

CYLINDER BLOCK GP

129-5229 COVER GP-CYLINDER BLOCK

129-5229 COVER GP-CYLINDER BLOCK
S/N LJX72-UP
PART OF 227-5354, 262-3742, 361-8104 ENGINE AR-COMPLETE
AN ATTACHMENT

230-7181 CYLINDER BLOCK AS

230-7181 CYLINDER BLOCK AS
S/N LJX77-UP
PART OF 230-7182 CYLINDER BLOCK AS
AN ATTACHMENT

230-7182 CYLINDER BLOCK AS

230-7182 CYLINDER BLOCK AS
S/N LJX77-UP
PART OF 237-0842 CYLINDER BLOCK GP
AN ATTACHMENT

348-9904 CYLINDER BLOCK AS

348-9904 CYLINDER BLOCK AS
S/N LJX592-UP
PART OF 348-9905 CYLINDER BLOCK AS
AN ATTACHMENT

348-9905 CYLINDER BLOCK AS

348-9905 CYLINDER BLOCK AS
S/N LJX592-UP
PART OF 349-2528 CYLINDER BLOCK GP
AN ATTACHMENT

237-0842 CYLINDER BLOCK GP

237-0842 CYLINDER BLOCK GP
S/N LJX72-UP
PART OF 262-4027, 262-4028 ENGINE AR-CORE
AN ATTACHMENT

349-2528 CYLINDER BLOCK GP

349-2528 CYLINDER BLOCK GP
S/N LJX592-UP
PART OF 350-5493, 350-5508 ENGINE AR-CORE
AN ATTACHMENT

280-4239 PLUG GP-CYLINDER BLOCK

280-4239 PLUG GP-CYLINDER BLOCK
S/N LJX72-995
PART OF 227-5354, 262-3742 ENGINE AR-COMPLETE
AN ATTACHMENT

351-2234 PLUG GP-CYLINDER BLOCK

351-2234 PLUG GP-CYLINDER BLOCK
S/N LJX592-UP
PART OF 227-5354, 262-3742, 361-8104 ENGINE AR-COMPLETE
AN ATTACHMENT

CYLINDER HEAD GP

223-6408 BASE GP-VALVE COVER & INJ HARN

223-6408 BASE GP-VALVE COVER & INJ HARN
S/N LJX77-UP
PART OF 262-4027, 350-5493 ENGINE AR-CORE
AN ATTACHMENT

226-4927 BASE GP-VALVE COVER & INJ HARN

226-4927 BASE GP-VALVE COVER & INJ HARN
S/N LJX77-UP
PART OF 223-6408 BASE GP-VALVE COVER & INJ HARN
Type 1
AN ATTACHMENT

226-4927 BASE GP-VALVE COVER & INJ HARN

226-4927 BASE GP-VALVE COVER & INJ HARN
S/N LJX77-UP
PART OF 223-6408 BASE GP-VALVE COVER & INJ HARN
Type 2
AN ATTACHMENT

249-8716 BASE GP-VALVE COVER & INJ HARN

249-8716 BASE GP-VALVE COVER & INJ HARN
S/N LJX72-542
PART OF 249-8717 BASE GP-VALVE COVER & INJ HARN
AN ATTACHMENT

249-8716 BASE GP-VALVE COVER & INJ HARN

249-8716 BASE GP-VALVE COVER & INJ HARN
S/N LJX543-UP
PART OF 249-8717 BASE GP-VALVE COVER & INJ HARN
Type 1
AN ATTACHMENT

249-8716 BASE GP-VALVE COVER & INJ HARN

249-8716 BASE GP-VALVE COVER & INJ HARN
S/N LJX543-UP
PART OF 249-8717 BASE GP-VALVE COVER & INJ HARN
Type 2
AN ATTACHMENT

249-8717 BASE GP-VALVE COVER & INJ HARN

249-8717 BASE GP-VALVE COVER & INJ HARN
S/N LJX72-UP
PART OF 262-4028, 350-5508 ENGINE AR-CORE
AN ATTACHMENT

284-2787 CYLINDER HEAD AS

284-2787 CYLINDER HEAD AS
S/N LJX77-UP
PART OF 284-8892 CYLINDER HEAD GP
AN ATTACHMENT

357-7398 CYLINDER HEAD AS

357-7398 CYLINDER HEAD AS
S/N LJX72-UP
PART OF 359-0936 CYLINDER HEAD GP
AN ATTACHMENT

396-8374 CYLINDER HEAD AS

396-8374 CYLINDER HEAD AS
S/N LJX1219-UP
PART OF 396-8375 CYLINDER HEAD GP
AN ATTACHMENT

284-8892 CYLINDER HEAD GP

284-8892 CYLINDER HEAD GP
S/N LJX77-1218
PART OF 339-3585 CYLINDER HEAD GP
AN ATTACHMENT

339-3585 CYLINDER HEAD GP

339-3585 CYLINDER HEAD GP
S/N LJX72-1218
PART OF 262-4027, 262-4028, 350-5493, 350-5508 ENGINE AR-CORE
AN ATTACHMENT

339-3585 CYLINDER HEAD GP

339-3585 CYLINDER HEAD GP
S/N LJX1219-UP
PART OF 350-5493, 350-5508 ENGINE AR-CORE
Type 1
AN ATTACHMENT

339-3585 CYLINDER HEAD GP

339-3585 CYLINDER HEAD GP
S/N LJX1219-UP
PART OF 350-5493, 350-5508 ENGINE AR-CORE
Type 2
AN ATTACHMENT

359-0936 CYLINDER HEAD GP

359-0936 CYLINDER HEAD GP
S/N LJX1219-UP
PART OF 339-3585 CYLINDER HEAD GP
AN ATTACHMENT

396-8375 CYLINDER HEAD GP

396-8375 CYLINDER HEAD GP
S/N LJX1219-UP
PART OF 339-3585 CYLINDER HEAD GP
Type 1
AN ATTACHMENT

396-8375 CYLINDER HEAD GP

396-8375 CYLINDER HEAD GP
S/N LJX1219-UP
PART OF 339-3585 CYLINDER HEAD GP
Type 2
AN ATTACHMENT

442-0770 KIT-CYLINDER HEAD GASKET

442-0770 KIT-CYLINDER HEAD GASKET -SINGLE CYLINDER HEAD
S/N EYG1-UP
CONTAINS THE GASKETS, SEALS, & BENDABLE LOCKS TO REBUILD & REINSTALL A SINGLE CYLINDER HEAD. KIT INCLUDES THE TURBO GASKETS, BUT DOES NOT INCLUDE THE FUEL INJECTOR SEALS. ORDER A SINGLE INJECTOR SEAL KIT, AS NEEDED. FOR IN LINE 4 & 6 CYLINDER ENGINES WITH ONE CYLINDER HEAD ONLY. THE FOLLOWING TURBO MOUNTING HARDWARE WILL BE INCLUDED: BOLTS, NUTS, STUDS, WASHERS, SPACERS. APPLIES TO SINGLE CYLINDER HEAD KIT PART NUMBERS 317-8750-UP
FOR USE WITH @@@@@227-5354@@@@@, @@@@@361-8104@@@@@, @@@@@262-3742@@@@@
FIELD INSTALLATION

223-6407 PLUG GP-CYLINDER HEAD

223-6407 PLUG GP-CYLINDER HEAD
S/N LJX72-UP
PART OF 227-5354, 262-3742, 361-8104 ENGINE AR-COMPLETE
AN ATTACHMENT

DAMPER GP

234-1579 DAMPER GP

234-1579 DAMPER GP
S/N LJX72-UP
PART OF 235-0993 GEAR GP-FRONT
AN ATTACHMENT

352-7936 DAMPER GP

352-7936 DAMPER GP
S/N LJX1445-UP
PART OF 355-2286 GEAR GP-FRONT
AN ATTACHMENT

6N-2229 DAMPER GP

6N-2229 DAMPER GP
S/N LJX72-UP
PART OF 227-5354, 262-3742, 361-8104 ENGINE AR-COMPLETE
AN ATTACHMENT

DRIVE GP-ACCESSORY

228-0001 DRIVE GP-ACCESSORY

228-0001 DRIVE GP-ACCESSORY
S/N EYG1-UP
PART OF 227-9995 INSTALLATION AR-ENGINE

DRIVE GP-FAN

243-1872 DRIVE GP-FAN

243-1872 DRIVE GP-FAN
S/N EYG1-UP
PART OF 250-7573 DRIVE GP-FAN
AN ATTACHMENT

250-7573 DRIVE GP-FAN

250-7573 DRIVE GP-FAN -FAN CLUTCH
S/N EYG1-UP
CANNOT BE USED WITH @@@@@265-8058@@@@@
AN ATTACHMENT

265-8058 DRIVE GP-FAN

265-8058 DRIVE GP-FAN -DIRECT DRIVE
S/N EYG1-UP
Type 1
CANNOT BE USED WITH 250-7573 DRIVE GP-FAN
AN ATTACHMENT

265-8058 DRIVE GP-FAN

265-8058 DRIVE GP-FAN -DIRECT DRIVE
S/N EYG1-UP
Type 2
CANNOT BE USED WITH 250-7573 DRIVE GP-FAN
AN ATTACHMENT

192-0729 MANIFOLD GP-CONTROL

192-0729 MANIFOLD GP-CONTROL
S/N EYG1-UP
PART OF 250-7573 DRIVE GP-FAN
AN ATTACHMENT

176-5321 VALVE GP-MODULATING

176-5321 VALVE GP-MODULATING
S/N EYG1-UP
PART OF 192-0729 MANIFOLD GP-CONTROL
AN ATTACHMENT

ENGINE GP

434-4446 KIT-ENGINE GASKET

434-4446 KIT-ENGINE GASKET -CENTRAL, LOWER STRUCTURE
S/N EYG1-UP
~~CONTAINS THE GASKETS, SEALS, & BENDABLE LOCKS TO REINSTALL THE OIL PAN. INTERNAL OIL PUMP, & BLOCK COVERS
FOR USE WITH @@@@@262-3742@@@@@, @@@@@227-5354@@@@@
FIELD INSTALLATION

FLYWHEEL GP

231-6377 FLYWHEEL GP

231-6377 FLYWHEEL GP
S/N LJX72-UP
PART OF 227-5354, 262-3742, 361-8104 ENGINE AR-COMPLETE
AN ATTACHMENT

GEAR GP

235-0993 GEAR GP-FRONT

235-0993 GEAR GP-FRONT
S/N LJX72-UP
PART OF 262-4027, 262-4028, 350-5508 ENGINE AR-CORE
AN ATTACHMENT

355-2286 GEAR GP-FRONT

355-2286 GEAR GP-FRONT
S/N LJX996-UP
PART OF 350-5493, 350-5508 ENGINE AR-CORE
AN ATTACHMENT

231-6378 GEAR GP-REAR

231-6378 GEAR GP-REAR
S/N LJX72-UP
PART OF 227-5354, 262-3742, 361-8104 ENGINE AR-COMPLETE
AN ATTACHMENT

238-9862 HOUSING GP-FRONT

238-9862 HOUSING GP-FRONT
S/N LJX72-UP
PART OF 262-4027, 262-4028, 350-5493, 350-5508 ENGINE AR-CORE
AN ATTACHMENT

GUARD GP-BELT

266-2373 GUARD GP-BELT

266-2373 GUARD GP-BELT
S/N EYG1-UP
PART OF 228-0001 DRIVE GP-ACCESSORY

274-7947 GUARD GP-BELT

274-7947 GUARD GP-BELT
S/N EYG1-UP
PART OF 250-7573, 265-8058 DRIVE GP-FAN
AN ATTACHMENT

HOUSING GP-FLYWHEEL

230-4156 COVER GP-REAR HOUSING

230-4156 COVER GP-REAR HOUSING
S/N LJX72-203
PART OF 262-3742 ENGINE AR-COMPLETE
AN ATTACHMENT

299-9331 COVER GP-REAR HOUSING

299-9331 COVER GP-REAR HOUSING
S/N LJX77-UP
PART OF 227-5354, 262-3742, 361-8104 ENGINE AR-COMPLETE
AN ATTACHMENT

226-0297 HOUSING GP-FLYWHEEL

226-0297 HOUSING GP-FLYWHEEL
S/N LJX72-203
PART OF 262-3742 ENGINE AR-COMPLETE
AN ATTACHMENT

302-4288 HOUSING GP-FLYWHEEL

302-4288 HOUSING GP-FLYWHEEL
S/N LJX77-UP
PART OF 227-5354, 262-3742, 361-8104 ENGINE AR-COMPLETE
AN ATTACHMENT

233-2462 HOUSING GP-REAR

233-2462 HOUSING GP-REAR
S/N LJX72-UP
PART OF 262-4027, 262-4028 ENGINE AR-CORE
AN ATTACHMENT

350-8861 HOUSING GP-REAR

350-8861 HOUSING GP-REAR
S/N LJX592-UP
PART OF 350-5493, 350-5508 ENGINE AR-CORE
AN ATTACHMENT

236-8766 SUPPORT GP-HOUSING

236-8766 SUPPORT GP-HOUSING -REAR
S/N LJX72-203
PART OF 262-3742 ENGINE AR-COMPLETE
AN ATTACHMENT

305-2131 SUPPORT GP-HOUSING

305-2131 SUPPORT GP-HOUSING
S/N LJX77-UP
PART OF 227-5354, 262-3742, 361-8104 ENGINE AR-COMPLETE
AN ATTACHMENT

HOUSING GP-FRONT

237-3674 COVER GP-FRONT HOUSING

237-3674 COVER GP-FRONT HOUSING
S/N LJX72-UP
PART OF 227-5354, 262-3742, 361-8104 ENGINE AR-COMPLETE
AN ATTACHMENT

235-0993 GEAR GP-FRONT

235-0993 GEAR GP-FRONT
S/N LJX72-UP
PART OF 262-4027, 262-4028, 350-5508 ENGINE AR-CORE
AN ATTACHMENT

355-2286 GEAR GP-FRONT

355-2286 GEAR GP-FRONT
S/N LJX996-UP
PART OF 350-5493, 350-5508 ENGINE AR-CORE
AN ATTACHMENT

238-9862 HOUSING GP-FRONT

238-9862 HOUSING GP-FRONT
S/N LJX72-UP
PART OF 262-4027, 262-4028, 350-5493, 350-5508 ENGINE AR-CORE
AN ATTACHMENT

LIFTING GP-ENGINE

235-2014 LIFTING GP-ENGINE

235-2014 LIFTING GP-ENGINE
S/N LJX72-UP
PART OF 227-5354, 262-3742, 361-8104 ENGINE AR-COMPLETE
AN ATTACHMENT

MOUNTING GP-ALTERNATOR

259-5861 MOUNTING GP-ALTERNATOR & COMPR

259-5861 MOUNTING GP-ALTERNATOR & COMPR
S/N LJX72-UP
PART OF 227-5354, 262-3742, 361-8104 ENGINE AR-COMPLETE
AN ATTACHMENT

MOUNTING GP-ENGINE

142-4031 SUPPORT GP-ENGINE

142-4031 SUPPORT GP-ENGINE
S/N LJX72-UP
FOR TRANSPORTATION PURPOSES ONLY
PART OF 227-5354, 262-3742, 361-8104 ENGINE AR-COMPLETE
AN ATTACHMENT

227-9996 SUPPORT GP-ENGINE

227-9996 SUPPORT GP-ENGINE
S/N EYG1-UP
PART OF 227-9995 INSTALLATION AR-ENGINE

260-1714 SUPPORT GP-ENGINE

260-1714 SUPPORT GP-ENGINE
S/N EYG1-UP
PART OF 227-9996 SUPPORT GP-ENGINE

7E-6385 SUPPORT GP-ENGINE

7E-6385 SUPPORT GP-ENGINE
S/N LJX72-UP
PART OF 227-5354, 262-3742, 361-8104 ENGINE AR-COMPLETE
AN ATTACHMENT

236-8765 TRUNNION GP-ENGINE

236-8765 TRUNNION GP-ENGINE
S/N LJX72-UP
PART OF 227-5354, 262-3742, 361-8104 ENGINE AR-COMPLETE
AN ATTACHMENT

PAN GP-OIL

188-4645 COVER GP-OIL PAN

188-4645 COVER GP-OIL PAN
S/N LJX72-UP
PART OF 227-5354, 262-3742, 361-8104 ENGINE AR-COMPLETE
AN ATTACHMENT

188-4639 PAN GP-OIL

188-4639 PAN GP-OIL -ENGINE
S/N LJX72-UP
PART OF 227-5354, 262-3742, 361-8104 ENGINE AR-COMPLETE
AN ATTACHMENT

PISTON & ROD GP

213-4836 PISTON & ROD GP

213-4836 PISTON & ROD GP
S/N LJX72-1264
27 LITER, 18:1 COMPRESSION RATIO
PART OF 262-4027, 262-4028, 350-5493, 350-5508 ENGINE AR-CORE
AN ATTACHMENT

213-4836 PISTON & ROD GP

213-4836 PISTON & ROD GP
S/N LJX1265-UP
27 LITER, 18:1 COMPRESSION RATIO
PART OF 350-5493, 350-5508 ENGINE AR-CORE
AN ATTACHMENT

VALVE MECHANISM GP

313-4622 ACTUATOR AS-VALVE

313-4622 ACTUATOR AS-VALVE
S/N LJX72-UP
PART OF 255-7955 ACTUATOR GP-VALVE
AN ATTACHMENT

377-8599 ACTUATOR AS-VALVE

377-8599 ACTUATOR AS-VALVE
S/N LJX1445-UP
24-VOLT. CAT BRAKE
PART OF 379-3929 ACTUATOR GP-VALVE
AN ATTACHMENT

255-7955 ACTUATOR GP-VALVE

255-7955 ACTUATOR GP-VALVE
S/N LJX72-UP
PART OF 262-4028, 350-5508 ENGINE AR-CORE
AN ATTACHMENT

379-3929 ACTUATOR GP-VALVE

379-3929 ACTUATOR GP-VALVE
S/N LJX1445-UP
PART OF 350-5508 ENGINE AR-CORE
AN ATTACHMENT

223-6408 BASE GP-VALVE COVER & INJ HARN

223-6408 BASE GP-VALVE COVER & INJ HARN
S/N LJX77-UP
PART OF 262-4027, 350-5493 ENGINE AR-CORE
AN ATTACHMENT

226-4927 BASE GP-VALVE COVER & INJ HARN

226-4927 BASE GP-VALVE COVER & INJ HARN
S/N LJX77-UP
PART OF 223-6408 BASE GP-VALVE COVER & INJ HARN
Type 1
AN ATTACHMENT

226-4927 BASE GP-VALVE COVER & INJ HARN

226-4927 BASE GP-VALVE COVER & INJ HARN
S/N LJX77-UP
PART OF 223-6408 BASE GP-VALVE COVER & INJ HARN
Type 2
AN ATTACHMENT

249-8716 BASE GP-VALVE COVER & INJ HARN

249-8716 BASE GP-VALVE COVER & INJ HARN
S/N LJX72-542
PART OF 249-8717 BASE GP-VALVE COVER & INJ HARN
AN ATTACHMENT

249-8716 BASE GP-VALVE COVER & INJ HARN

249-8716 BASE GP-VALVE COVER & INJ HARN
S/N LJX543-UP
PART OF 249-8717 BASE GP-VALVE COVER & INJ HARN
Type 1
AN ATTACHMENT

249-8716 BASE GP-VALVE COVER & INJ HARN

249-8716 BASE GP-VALVE COVER & INJ HARN
S/N LJX543-UP
PART OF 249-8717 BASE GP-VALVE COVER & INJ HARN
Type 2
AN ATTACHMENT

249-8717 BASE GP-VALVE COVER & INJ HARN

249-8717 BASE GP-VALVE COVER & INJ HARN
S/N LJX72-UP
PART OF 262-4028, 350-5508 ENGINE AR-CORE
AN ATTACHMENT

280-7992 COVER GP-VALVE MECHANISM

280-7992 COVER GP-VALVE MECHANISM
S/N LJX72-203
PART OF 262-3742 ENGINE AR-COMPLETE
AN ATTACHMENT

293-4681 COVER GP-VALVE MECHANISM

293-4681 COVER GP-VALVE MECHANISM
S/N LJX77-UP
PART OF 227-5354, 262-3742, 361-8104 ENGINE AR-COMPLETE
AN ATTACHMENT

255-8001 MECHANISM GP-FUEL PUMP & VALVE

255-8001 MECHANISM GP-FUEL PUMP & VALVE
S/N LJX1014-UP
PART OF 350-5508 ENGINE AR-CORE
AN ATTACHMENT

255-8001 MECHANISM GP-FUEL PUMP & VALVE

255-8001 MECHANISM GP-FUEL PUMP & VALVE
S/N LJX72-591
PART OF 262-4028 ENGINE AR-CORE
AN ATTACHMENT

260-9631 MECHANISM GP-FUEL PUMP & VALVE

260-9631 MECHANISM GP-FUEL PUMP & VALVE
S/N LJX77-UP
PART OF 262-4027, 350-5493 ENGINE AR-CORE
AN ATTACHMENT

260-9631 MECHANISM GP-FUEL PUMP & VALVE

260-9631 MECHANISM GP-FUEL PUMP & VALVE
S/N LJX996-UP
PART OF 350-5493 ENGINE AR-CORE
Type 1
AN ATTACHMENT

260-9631 MECHANISM GP-FUEL PUMP & VALVE

260-9631 MECHANISM GP-FUEL PUMP & VALVE
S/N LJX996-UP
PART OF 350-5493 ENGINE AR-CORE
Type 2
AN ATTACHMENT

280-8043 ROCKER ARM GP

280-8043 ROCKER ARM GP
S/N LJX72-591
PART OF 255-8001 MECHANISM GP-FUEL PUMP & VALVE
AN ATTACHMENT

301-5352 ROCKER ARM GP

301-5352 ROCKER ARM GP -UNIT INJECTOR
S/N LJX77-UP
PART OF 342-6643, 392-0066 ROCKER ARM GP
AN ATTACHMENT

320-2794 ROCKER ARM GP

320-2794 ROCKER ARM GP
S/N LJX77-UP
PART OF 342-6643 ROCKER ARM GP
AN ATTACHMENT

342-6643 ROCKER ARM GP

342-6643 ROCKER ARM GP -VALVE
S/N LJX77-UP
PART OF 260-9631 MECHANISM GP-FUEL PUMP & VALVE
AN ATTACHMENT

384-1365 ROCKER ARM GP

384-1365 ROCKER ARM GP
S/N LJX77-UP
PART OF 392-0066 ROCKER ARM GP
AN ATTACHMENT

392-0066 ROCKER ARM GP

392-0066 ROCKER ARM GP
S/N LJX77-UP
PART OF 260-9631 MECHANISM GP-FUEL PUMP & VALVE
AN ATTACHMENT

437-3876 ROCKER ARM GP

437-3876 ROCKER ARM GP
S/N LJX77-UP
PART OF 255-8001, 260-9631 MECHANISM GP-FUEL PUMP & VALVE
Type 1
AN ATTACHMENT

437-3876 ROCKER ARM GP

437-3876 ROCKER ARM GP
S/N LJX77-UP
PART OF 255-8001, 260-9631 MECHANISM GP-FUEL PUMP & VALVE
Type 2
AN ATTACHMENT

437-3876 ROCKER ARM GP

437-3876 ROCKER ARM GP
S/N LJX77-UP
PART OF 255-8001, 260-9631 MECHANISM GP-FUEL PUMP & VALVE
Type 3
AN ATTACHMENT

437-3877 ROCKER ARM GP

437-3877 ROCKER ARM GP -EXHAUST
S/N LJX1014-UP
PART OF 437-3876 ROCKER ARM GP
AN ATTACHMENT

437-3881 ROCKER ARM GP

437-3881 ROCKER ARM GP -UNIT INJECTOR
S/N LJX1014-UP
PART OF 437-3876 ROCKER ARM GP
AN ATTACHMENT

489-8223 ROCKER ARM GP

489-8223 ROCKER ARM GP
S/N LJX1014-UP
PART OF 437-3876 ROCKER ARM GP
AN ATTACHMENT

524-3708 ROCKER ARM GP

524-3708 ROCKER ARM GP
S/N LJX1014-UP
PART OF 437-3876 ROCKER ARM GP
AN ATTACHMENT

256-9738 PLATE GP-ENGINE IDENTIFICATION

256-9738 PLATE GP-ENGINE IDENTIFICATION
S/N LJX72-UP
PART OF 227-5354, 262-3742, 361-8104 ENGINE AR-COMPLETE
AN ATTACHMENT

HOUSING GP-REAR

233-2462 HOUSING GP-REAR

233-2462 HOUSING GP-REAR
S/N LJX72-UP
PART OF 262-4027, 262-4028 ENGINE AR-CORE
AN ATTACHMENT

350-8861 HOUSING GP-REAR

350-8861 HOUSING GP-REAR
S/N LJX592-UP
PART OF 350-5493, 350-5508 ENGINE AR-CORE
AN ATTACHMENT

Information:

(For parts list, see above)

BASIC ENGINE

BELT TIGHTENER GP

Disassembly and Assembly

Belt Tensioner - Remove and Install
773F and 775F OEM Off-Highway Truck Engine Supplement

ENGINE BRAKE GP

Operation and Maintenance Manual

Engine Brake Slave Piston Lash - Inspect/Adjust - If Equipped
773F and 775F OEM Off-Highway Truck

Special Instruction

Installation Procedure for the Engine Compression Brake Retrofit for Certain Off-Highway Trucks{1119, 1120, 1129, 1130, 1408, 7332, 7610, 7620}
Installation Procedure for the Engine Compression Brake Retrofit for Certain Off-Highway Trucks{1119, 1120, 1129, 1130, 1408, 7332, 7610, 7620}

Specifications

Compression Brake
C27 and C32 Engines for Caterpillar Built Machines

Systems Operation

Compression Brake - If Equipped
C27 and C32 Engines for Caterpillar Built Machines

Testing and Adjusting

Compression Brake Lash - Adjust - If Equipped
C27 and C32 Engines for Caterpillar Built Machines

Troubleshooting

CID 2533 FMI 06 Compression Brake Low/High Solenoid #1 current above normal
C27 and C32 Engines for Caterpillar Built Machines

CID 2533 FMI 05 Compression Brake Low/High Solenoid #1 current below normal
C27 and C32 Engines for Caterpillar Built Machines

CID 2534 FMI 05 Compression Brake Low/High Solenoid #2 current below normal
C27 and C32 Engines for Caterpillar Built Machines

CID 2535 FMI 05 Compression Brake Medium/High Solenoid #1 current below normal
C27 and C32 Engines for Caterpillar Built Machines

CID 2536 FMI 05 Compression Brake Medium/High Solenoid #2 current below normal
C27 and C32 Engines for Caterpillar Built Machines

CID 2534 FMI 06 Compression Brake Low/High Solenoid #2 current above normal
C27 and C32 Engines for Caterpillar Built Machines

CID 2535 FMI 06 Compression Brake Medium/High Solenoid #1 current above normal
C27 and C32 Engines for Caterpillar Built Machines

CID 2536 FMI 06 Compression Brake Medium/High Solenoid #2 current above normal
C27 and C32 Engines for Caterpillar Built Machines

Compression Brake Solenoid Circuit - Test
C27 and C32 Engines for Caterpillar Built Machines

Service Magazine

Caterpillar Engine Compression Brake Retrofit Upgrade For Off-Highway Trucks {1120, 1129, 1130, 1408, 7610, 7620}
2011/06/06

CAMSHAFT GP

Engine News

New Camshafts Are Used for Certain C27 and C32 Commercial Engines {1210}
2014/05/20

Special Instruction

Improved Camshafts, Rocker Arm Assemblies, and High-Pressure Oil Pumps Are Now Used on C27 and C32 Machine Engines {1123, 1210, 1304, 1315}
Improved Camshafts, Rocker Arm Assemblies, and High-Pressure Oil Pumps Are Now Used on C27 and C32 Machine Engines {1123, 1210, 1304, 1315}

Crankshaft Seal Installation {1160, 1161}
Crankshaft Seal Installation {1160, 1161}

Specifications

Camshaft
C27 and C32 Engines for Caterpillar Built Machines

Reuse And Salvage Guidelines

Reuse and Salvage for Camshafts {1210, 1210}
Reuse and Salvage for Camshafts {1210, 1210}

Testing and Adjusting

Excessive Bearing Wear - Inspect
C27 and C32 Engines for Caterpillar Built Machines

Disassembly and Assembly

Camshaft Bearings - Remove
C27 and C32 Engines for Caterpillar Built Machines

Camshaft Bearings - Install
C27 and C32 Engines for Caterpillar Built Machines

Camshaft - Remove
C27 and C32 Engines for Caterpillar Built Machines

Camshaft - Install
C27 and C32 Engines for Caterpillar Built Machines

Camshaft - Install - C27
C27 and C32 Engines for Caterpillar Built Machines

Service Magazine

Improved Camshafts Are Now Used on Certain C27 and C32 Machines {1210}
2013/02/21

Improved Reman Camshafts Are Now Used on Certain C27 and C32 Machines {1209, 1210}
2014/05/30

Cat® Reman Has Added Valve Actuators, Valve Lifters, Rocker Arms, and Camshafts for Certain Machine Engines {1121, 1130, 1209, 1210}
2014/09/05

CRANKSHAFT GP

Engine News

New Tooling and Installation Process for Crankshaft Seal on C27 and C32 Engines {0701, 1160, 1161}
New Tooling and Installation Process for Crankshaft Seal on C27 and C32 Engines {0701, 1160, 1161}

Specifications

Main Bearing Journal
C27 and C32 Engines for Caterpillar Built Machines

Connecting Rod Bearing Journal
C27 and C32 Engines for Caterpillar Built Machines

Crankshaft Seals
C27 and C32 Engines for Caterpillar Built Machines

Crankshaft
C27 and C32 Engines for Caterpillar Built Machines

Tool Operating Manual

362-4250 Deck Height Measuring Tool{1201}
362-4250 Deck Height Measuring Tool{1201}

9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}

Reuse And Salvage Guidelines

Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}

Reuse and Salvage for Crankshafts {0674, 1202}
Reuse and Salvage for Crankshafts {0674, 1202}

Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}

9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}

Reuse and Salvage for Engine Dampers {1202, 1205}
Reuse and Salvage for Engine Dampers {1202, 1205}

Information Release Memo

REMAN CRANKSHAFTS NOW AVAILABLE FOR HIGH DISPLACEMENT (HD) 3500 ENGINES AND OTHER MINING APPLICATIONS
REMAN CRANKSHAFTS NOW AVAILABLE FOR HIGH DISPLACEMENT (HD) 3500 ENGINES AND OTHER MINING APPLICATIONS

Testing and Adjusting

Excessive Bearing Wear - Inspect
C27 and C32 Engines for Caterpillar Built Machines

Main Bearings - Inspect
C27 and C32 Engines for Caterpillar Built Machines

Disassembly and Assembly

Bearing Clearance - Check
C27 and C32 Engines for Caterpillar Built Machines

Crankshaft Rear Seal - Remove
C27 and C32 Engines for Caterpillar Built Machines

Crankshaft Rear Seal - Install
C27 and C32 Engines for Caterpillar Built Machines

Crankshaft Front Seal - Remove
C27 and C32 Engines for Caterpillar Built Machines

Crankshaft Front Seal - Install
C27 and C32 Engines for Caterpillar Built Machines

Crankshaft Main Bearings - Remove
C27 and C32 Engines for Caterpillar Built Machines

Crankshaft Main Bearings - Install
C27 and C32 Engines for Caterpillar Built Machines

Crankshaft - Remove
C27 and C32 Engines for Caterpillar Built Machines

Crankshaft - Install
C27 and C32 Engines for Caterpillar Built Machines

Service Magazine

Updated Reuse And Salvage Guidelines for C27 and C32 Machine Engines {1202, 1218}
2015/04/10

New Tooling and Installation Process for Crankshaft Seal on C27 and C32 Engines {0701, 1160, 1161}
New Tooling and Installation Process for Crankshaft Seal on C27 and C32 Engines {0701, 1160, 1161}

CYLINDER BLOCK GP

Special Instruction

Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}

Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}

Technical Information Bulletin

Core Plugs in C27 and C32 Remanufactured Long Blocks and Engine Cylinder Heads Can Be Installed At An Improper Depth{1100, 1201}
Core Plugs in C27 and C32 Remanufactured Long Blocks and Engine Cylinder Heads Can Be Installed At An Improper Depth{1100, 1201}

Specifications

Main Bearing Journal
C27 and C32 Engines for Caterpillar Built Machines

Cylinder Liner
C27 and C32 Engines for Caterpillar Built Machines

Cylinder Block
C27 and C32 Engines for Caterpillar Built Machines

Cylinder Liner
C27 and C32 Engines for Caterpillar Built Machines

Cylinder Block
C27 and C32 Engines for Caterpillar Built Machines

Cylinder Liner
C27 and C32 Engines for Caterpillar Built Machines

Tool Operating Manual

362-4250 Deck Height Measuring Tool{1201}
362-4250 Deck Height Measuring Tool{1201}

Reuse And Salvage Guidelines

Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}

Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}

Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}

Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}

Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}

Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}

Testing and Adjusting

Cylinder Block - Inspect
C27 and C32 Engines for Caterpillar Built Machines

Excessive Bearing Wear - Inspect
C27 and C32 Engines for Caterpillar Built Machines

Main Bearings - Inspect
C27 and C32 Engines for Caterpillar Built Machines

Cylinder Liner Projection - Inspect
C27 and C32 Engines for Caterpillar Built Machines

Disassembly and Assembly

Bearing Clearance - Check
C27 and C32 Engines for Caterpillar Built Machines

Camshaft Bearings - Remove
C27 and C32 Engines for Caterpillar Built Machines

Camshaft Bearings - Install
C27 and C32 Engines for Caterpillar Built Machines

Cylinder Liner - Remove
C27 and C32 Engines for Caterpillar Built Machines

Cylinder Liner - Install
C27 and C32 Engines for Caterpillar Built Machines

Piston Cooling Jets - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines

Crankshaft Main Bearings - Remove
C27 and C32 Engines for Caterpillar Built Machines

Crankshaft Main Bearings - Install
C27 and C32 Engines for Caterpillar Built Machines

Service Magazine

Updated Cylinder Block Rear Housing Gasket is Now Available for Certain Cat® Machine Engines {1157, 1201}
Updated Cylinder Block Rear Housing Gasket is Now Available for Certain Cat^® Machine Engines {1157, 1201}

CYLINDER HEAD GP

Engine News

A New Water Seal Assembly Is Now Used on All 3408, 3412, C27 and C32 Commercial Engines {1100, 7555}
2013/05/13

Operation and Maintenance Manual

Engine Valve Rotators - Inspect
773F and 775F OEM Off-Highway Truck

Engine Valve Lash - Check/Adjust
773F and 775F OEM Off-Highway Truck

Special Instruction

Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}

Technical Information Bulletin

Diagnosing Fuel Dilution of Engine Oil for C27 and C32 Engines{1101, 1124, 1251, 1280, 1290}
Diagnosing Fuel Dilution of Engine Oil for C27 and C32 Engines{1101, 1124, 1251, 1280, 1290}

Specifications

Cylinder Head
C27 and C32 Engines for Caterpillar Built Machines

Cylinder Head Valves
C27 and C32 Engines for Caterpillar Built Machines

Cylinder Head
C27 and C32 Engines for Caterpillar Built Machines

Cylinder Head Valves
C27 and C32 Engines for Caterpillar Built Machines

Tool Operating Manual

{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}

Reuse And Salvage Guidelines

Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}

Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}

Information Release Memo

CAT REMAN ANNOUNCES ADDITIONAL CYLINDER HEAD RELEASES
CAT REMAN ANNOUNCES ADDITIONAL CYLINDER HEAD RELEASES

CAT REMAN ANNOUNCES ADDITIONAL CYLINDER HEAD RELEASES FOR MINING AND OTHER APPLICATIONS
CAT REMAN ANNOUNCES ADDITIONAL CYLINDER HEAD RELEASES FOR MINING AND OTHER APPLICATIONS

Testing and Adjusting

Engine Valve Lash - Inspect/Adjust
C27 and C32 Engines for Caterpillar Built Machines

Troubleshooting

Valve Rotator or Spring Lock Is Free
C27 and C32 Engines for Caterpillar Built Machines

Disassembly and Assembly

Camshaft Bearings - Remove
C27 and C32 Engines for Caterpillar Built Machines

Camshaft Bearings - Install
C27 and C32 Engines for Caterpillar Built Machines

Electronic Unit Injector Sleeve - Install
C27 and C32 Engines for Caterpillar Built Machines

Inlet and Exhaust Valve Guides - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines

Inlet and Exhaust Valve Springs - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines

Inlet and Exhaust Valves - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines

Electronic Unit Injector Sleeve - Remove
C27 and C32 Engines for Caterpillar Built Machines

Inlet and Exhaust Valve Seat Inserts - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines

Rocker Arm and Shaft - Remove
C27 and C32 Engines for Caterpillar Built Machines

Rocker Arm and Shaft - Install
C27 and C32 Engines for Caterpillar Built Machines

Cylinder Head - Remove - C32
C27 and C32 Engines for Caterpillar Built Machines

Cylinder Head - Install - C32
C27 and C32 Engines for Caterpillar Built Machines

Cylinder Head - Remove - C27
C27 and C32 Engines for Caterpillar Built Machines

Cylinder Head - Install - C27
C27 and C32 Engines for Caterpillar Built Machines

Service Magazine

Caterpillar Engine Compression Brake Retrofit Upgrade For Off-Highway Trucks {1120, 1129, 1130, 1408, 7610, 7620}
2011/06/06

A New Intake Valve and Seat Combination Is Now Used with a New Cylinder Head on the Engines of Certain Machines {1100, 1101}
2012/09/17

Cat® Reman Now Offers Upgrade to New Cylinder Heads for Certain Machine Engines {1100}
2014/10/03

DAMPER GP

Specifications

Vibration Damper
C27 and C32 Engines for Caterpillar Built Machines

Reuse And Salvage Guidelines

Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}

Reuse and Salvage for Engine Dampers {1202, 1205}
Reuse and Salvage for Engine Dampers {1202, 1205}

Testing and Adjusting

Vibration Damper - Check
C27 and C32 Engines for Caterpillar Built Machines

Disassembly and Assembly

Vibration Damper and Pulley - Remove and Install - Type 1
C27 and C32 Engines for Caterpillar Built Machines

Vibration Damper and Pulley - Remove and Install - Type 2
C27 and C32 Engines for Caterpillar Built Machines

Vibration Damper and Pulley - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines

DRIVE GP-FAN

Operation and Maintenance Manual

Belts - Inspect/Replace
773F and 775F OEM Off-Highway Truck

Special Instruction

Procedure to Improve the Fan Drive Group on 773F and 775F Off-Highway Trucks{1359}
Procedure to Improve the Fan Drive Group on 773F and 775F Off-Highway Trucks{1359}

Service Letter-NACD

PRODUCT SUPPORT PROGRAM FOR REPLACING 8T4185 FAN DRIVE BOLT ON CERTAIN 773F AND 775F OFF-HIGHWAY TRUCKS
PRODUCT SUPPORT PROGRAM FOR REPLACING 8T4185 FAN DRIVE BOLT ON CERTAIN 773F AND 775F OFF-HIGHWAY TRUCKS

PRODUCT SUPPORT PROGRAM FOR UPDATING 265-8058 DRIVE GP-FAN ON CERTAIN 773F AND 775F OFF-HIGHWAY TRUCKS
PRODUCT SUPPORT PROGRAM FOR UPDATING 265-8058 DRIVE GP-FAN ON CERTAIN 773F AND 775F OFF-HIGHWAY TRUCKS

Service Letter-Australia

Service Letter-CFEL

Service Letter-CSARL

Service Letter-Americas

Service Letter-China

Service Letter-Asia

Service Letter-APD

Disassembly and Assembly

Fan Drive - Remove
773F and 775F OEM Off-Highway Truck Engine Supplement

Fan Drive - Install
773F and 775F OEM Off-Highway Truck Engine Supplement

Service Magazine

A New Spring Is Now Used On the Fan Drive Group for Certain 773F and 775F Off-Highway Trucks {1359}
2012/11/15

A Procedure to Improve the Fan Drive Group Is Now Available on 773F and 775F Off-Highway Trucks {1359}
2014/03/06

ENGINE GP

Operation and Maintenance Manual

Engine Oil Sample - Obtain
773F and 775F OEM Off-Highway Truck

Special Instruction

Oil and Your Engine {1000}
Oil and Your Engine {1000}

Engine Oil Contains Elevated Lead (Pb) {1000, 1348}
Engine Oil Contains Elevated Lead (Pb) {1000, 1348}

Service Magazine

Engine Storage and Engine Start-Up After Storage {1000, 1300, 1348, 7418}
Engine Storage and Engine Start-Up After Storage {1000, 1300, 1348, 7418}

FASTENER GP-ENGINE

Reuse And Salvage Guidelines

Inspection and Reuse of Critical Fasteners Used in All Engines {7553, 7553}
Inspection and Reuse of Critical Fasteners Used in All Engines {7553, 7553}

FLYWHEEL GP

Specifications

Flywheel
C27 and C32 Engines for Caterpillar Built Machines

Flywheel Housing
C27 and C32 Engines for Caterpillar Built Machines

Housing (Rear)
C27 and C32 Engines for Caterpillar Built Machines

Flywheel
C27 and C32 Engines for Caterpillar Built Machines

Flywheel Housing
C27 and C32 Engines for Caterpillar Built Machines

Flywheel
C27 and C32 Engines for Caterpillar Built Machines

Flywheel Housing
C27 and C32 Engines for Caterpillar Built Machines

Housing (Rear)
C27 and C32 Engines for Caterpillar Built Machines

Flywheel
C27 and C32 Engines for Caterpillar Built Machines

Flywheel Housing
C27 and C32 Engines for Caterpillar Built Machines

Reuse And Salvage Guidelines

Reuse and Salvage for Flywheel Assemblies {1156}
Reuse and Salvage for Flywheel Assemblies {1156}

Testing and Adjusting

Flywheel - Inspect
C27 and C32 Engines for Caterpillar Built Machines

Disassembly and Assembly

Flywheel - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines

Housing (Rear) - Remove
C27 and C32 Engines for Caterpillar Built Machines

Housing (Rear) - Install
C27 and C32 Engines for Caterpillar Built Machines

GEAR GP

Specifications

Gear Group (Front)
C27 and C32 Engines for Caterpillar Built Machines

Gear Group (Rear)
C27 and C32 Engines for Caterpillar Built Machines

Gear Group (Front)
C27 and C32 Engines for Caterpillar Built Machines

Gear Group (Rear)
C27 and C32 Engines for Caterpillar Built Machines

Reuse And Salvage Guidelines

Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206}
Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206}

Testing and Adjusting

Rear Gear Group - Time
C27 and C32 Engines for Caterpillar Built Machines

Disassembly and Assembly

Gear Group (Front) - Remove
C27 and C32 Engines for Caterpillar Built Machines

Gear Group (Front) - Install
C27 and C32 Engines for Caterpillar Built Machines

Gear Group (Rear) - Remove
C27 and C32 Engines for Caterpillar Built Machines

Gear Group (Rear) - Install
C27 and C32 Engines for Caterpillar Built Machines

Rear Gear Group - Remove - Pump Drive
773F and 775F OEM Off-Highway Truck Engine Supplement

Rear Gear Group - Install - Pump Drive
773F and 775F OEM Off-Highway Truck Engine Supplement

Rear Gear Group - Disassemble - Pump Drive
773F and 775F OEM Off-Highway Truck Engine Supplement

Rear Gear Group - Assemble - Pump Drive
773F and 775F OEM Off-Highway Truck Engine Supplement

Gear Group (Rear) - Remove
C27 and C32 Engines for Caterpillar Built Machines

Service Magazine

New Pump Adapter for Rear Engine Pump Mounted Group Is Now Available for 773F Off-Highway Trucks and 775F Quarry Trucks {1204, 1206}
2012/03/13

New O-Ring Seal is Now Used on Certain Cat® Machine Engines {1204, 7555}
New O-Ring Seal is Now Used on Certain Cat^® Machine Engines {1204, 7555}

HOUSING GP-FLYWHEEL

Specifications

Flywheel Housing
C27 and C32 Engines for Caterpillar Built Machines

Testing and Adjusting

Flywheel Housing - Inspect
C27 and C32 Engines for Caterpillar Built Machines

Disassembly and Assembly

Flywheel Housing - Remove and Install - C32
C27 and C32 Engines for Caterpillar Built Machines

Flywheel Housing - Remove and Install - C27
C27 and C32 Engines for Caterpillar Built Machines

Service Magazine

HOUSING GP-FRONT

Specifications

Crankshaft Seals
C27 and C32 Engines for Caterpillar Built Machines

Housing (Front)
C27 and C32 Engines for Caterpillar Built Machines

Reuse And Salvage Guidelines

Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}

Disassembly and Assembly

Housing (Front) - Remove
C27 and C32 Engines for Caterpillar Built Machines

Housing (Front) - Install
C27 and C32 Engines for Caterpillar Built Machines

Service Magazine

Improved Front Cylinder Block Gaskets are Now Used on Certain C27 and C32 Machine Engines {1151, 1162, 7555}
Improved Front Cylinder Block Gaskets are Now Used on Certain C27 and C32 Machine Engines {1151, 1162, 7555}

New Tooling and Installation Process for Crankshaft Seal on C27 and C32 Engines {0701, 1160, 1161}
New Tooling and Installation Process for Crankshaft Seal on C27 and C32 Engines {0701, 1160, 1161}

MISCELLANEOUS INFORMATION

Operation and Maintenance Manual

Engine Valve Lash - Check/Adjust
773F and 775F OEM Off-Highway Truck

MOUNTING GP-ENGINE

Disassembly and Assembly

Engine Trunnion - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines

PAN GP-OIL

Operation and Maintenance Manual

Engine Oil Level - Check
773F and 775F OEM Off-Highway Truck

Engine Oil and Filter - Change
773F and 775F OEM Off-Highway Truck

Specifications

Engine Oil Pan
C27 and C32 Engines for Caterpillar Built Machines

Contamination Control Guidelines

Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}

Disassembly and Assembly

Engine Oil Pan - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines

Guard (Engine Oil Pan) - Remove and Install
773F and 775F OEM Off-Highway Truck Engine Supplement

Oil Pan - Remove
773F and 775F OEM Off-Highway Truck Engine Supplement

Oil Pan - Install
773F and 775F OEM Off-Highway Truck Engine Supplement

Service Magazine

New Oil Pan Gasket Is Available on Certain C27 and C32 Machine Engines {1302, 7555}
2010/05/27

PISTON & ROD GP

Engine News

A New Undersized Connecting Rod Bearing Is Available for All C27 and C32 Engines {1225}
2009/12/09

Special Instruction

Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}

Service Letter-NACD

PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY CLEANING 10R-5457 CONNECTING RODS IN CERTAIN CYLINDER PACKS, SHORT BLOCKS, AND LONG BLOCKS IN DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY CLEANING 10R-5457 CONNECTING RODS IN CERTAIN CYLINDER PACKS, SHORT BLOCKS, AND LONG BLOCKS IN DEALER PARTS STOCK

Service Letter-Australia

Service Letter-CFEL

Service Letter-CSARL

Service Letter-Americas

Technical Information Bulletin

Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}

Specifications

Connecting Rod Bearing Journal
C27 and C32 Engines for Caterpillar Built Machines

Connecting Rod
C27 and C32 Engines for Caterpillar Built Machines

Piston and Rings - C27 Engines
C27 and C32 Engines for Caterpillar Built Machines

Piston and Rings - C32 Engines
C27 and C32 Engines for Caterpillar Built Machines

Piston and Rings
C27 and C32 Engines for Caterpillar Built Machines

Tool Operating Manual

NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}

Service Letter-China

Service Letter-Asia

Reuse And Salvage Guidelines

Reuse and Salvage for Connecting Rods {1218}
Reuse and Salvage for Connecting Rods {1218}

Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}

Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}

Service Letter-APD

Testing and Adjusting

Engine Crankcase Pressure (Blowby) - Test
C27 and C32 Engines for Caterpillar Built Machines

Compression - Test
C27 and C32 Engines for Caterpillar Built Machines

Excessive Bearing Wear - Inspect
C27 and C32 Engines for Caterpillar Built Machines

Cylinder Liner Projection - Inspect
C27 and C32 Engines for Caterpillar Built Machines

Piston Ring Groove - Inspect
C27 and C32 Engines for Caterpillar Built Machines

Disassembly and Assembly

Bearing Clearance - Check
C27 and C32 Engines for Caterpillar Built Machines

Pistons and Connecting Rods - Disassemble
C27 and C32 Engines for Caterpillar Built Machines

Piston Cooling Jets - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines

Pistons and Connecting Rods - Remove
C27 and C32 Engines for Caterpillar Built Machines

Pistons and Connecting Rods - Assemble
C27 and C32 Engines for Caterpillar Built Machines

Pistons and Connecting Rods - Install
C27 and C32 Engines for Caterpillar Built Machines

Connecting Rod Bearings - Remove
C27 and C32 Engines for Caterpillar Built Machines

Connecting Rod Bearings - Install
C27 and C32 Engines for Caterpillar Built Machines

Service Magazine

A New Undersized Connecting Rod Bearing Is Available for All C27 and C32 Machine Engines {1225}
2009/12/04

An Additional One Piece Steel Piston Is Available for Cylinder Packs Used in the C15 and C27 Engines of Certain Machines {1225, 1239}
An Additional One Piece Steel Piston Is Available for Cylinder Packs Used in the C15 and C27 Engines of Certain Machines {1225, 1239}

Updated Reuse And Salvage Guidelines for C27 and C32 Machine Engines {1202, 1218}
2015/04/10

POWER TAKE-OFF GP

Disassembly and Assembly

Rear Power Take-Off (RPTO) - Remove
C27 and C32 Engines for Caterpillar Built Machines

Rear Power Take-Off (RPTO) - Install
C27 and C32 Engines for Caterpillar Built Machines

Rear Power Take-Off (RPTO) - Disassemble
C27 and C32 Engines for Caterpillar Built Machines

Rear Power Take-Off (RPTO) - Assemble
C27 and C32 Engines for Caterpillar Built Machines

PULLEY GP

Reuse And Salvage Guidelines

Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}

Disassembly and Assembly

Vibration Damper and Pulley - Remove and Install - Type 1
C27 and C32 Engines for Caterpillar Built Machines

Vibration Damper and Pulley - Remove and Install - Type 2
C27 and C32 Engines for Caterpillar Built Machines

Vibration Damper and Pulley - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines

PUMP GP-GEAR

Reuse And Salvage Guidelines

Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}

Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}

Bench Test Procedures

Bench Test Procedure for Gear Pumps {5073}
Bench Test Procedure for Gear Pumps {5073}

TOOLS

Engine News

New Tooling and Installation Process for Crankshaft Seal on C27 and C32 Engines {0701, 1160, 1161}
New Tooling and Installation Process for Crankshaft Seal on C27 and C32 Engines {0701, 1160, 1161}

Special Instruction

Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}

Technical Information Bulletin

368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}

Tool Operating Manual

9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}

NEHS0566 4C-9832 Large Engine Roll-Over Stand {0599, 0701}
NEHS0566 4C-9832 Large Engine Roll-Over Stand {0599, 0701}

NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}

NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}

{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}

Reuse And Salvage Guidelines

Reuse and Salvage for Crankshafts {0674, 1202}
Reuse and Salvage for Crankshafts {0674, 1202}

Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}

9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}

Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}

Valve Cover Base Threaded Insert Repair {0599, 0676, 0700, 0701, 1107}
Valve Cover Base Threaded Insert Repair {0599, 0676, 0700, 0701, 1107}

Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}

Service Magazine

Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}

SERPENTINE/V-BELTS

Operation and Maintenance Manual

Belts - Inspect/Replace
773F and 775F OEM Off-Highway Truck

VALVE MECHANISM GP

Engine News

New Rocker Arms Are Used on C27 and C32 Commercial Engines {1123}
2014/05/07

Correct Valve Rocker Arm Usage on C27 and C32 Engines {1123}
2015/09/04

Cat® Reman Announces Changes to the Remanufactured Injector Rocker Arms for 3406E, 3456, C15, C16, C18, C27, and, C32 Engines {1123}
Cat^® Reman Announces Changes to the Remanufactured Injector Rocker Arms for 3406E, 3456, C15, C16, C18, C27, and, C32 Engines {1123}

Special Instruction

Specifications

Electronic Unit Injector Rocker Arm
C27 and C32 Engines for Caterpillar Built Machines

Valve Mechanism
C27 and C32 Engines for Caterpillar Built Machines

Tool Operating Manual

9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}

Reuse And Salvage Guidelines

Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}

9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}

Valve Cover Base Threaded Insert Repair {0599, 0676, 0700, 0701, 1107}
Valve Cover Base Threaded Insert Repair {0599, 0676, 0700, 0701, 1107}

Testing and Adjusting

Engine Valve Lash - Inspect/Adjust
C27 and C32 Engines for Caterpillar Built Machines

Finding Top Center Position for No. 1 Piston
C27 and C32 Engines for Caterpillar Built Machines

Troubleshooting

Excessive Valve Lash
C27 and C32 Engines for Caterpillar Built Machines

Disassembly and Assembly

Rocker Arm - Disassemble
C27 and C32 Engines for Caterpillar Built Machines

Rocker Arm - Assemble
C27 and C32 Engines for Caterpillar Built Machines

Valve Mechanism Cover Base - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines

Rocker Arm and Shaft - Remove
C27 and C32 Engines for Caterpillar Built Machines

Rocker Arm and Shaft - Install
C27 and C32 Engines for Caterpillar Built Machines

Valve Mechanism Cover - Remove and Install - C27
C27 and C32 Engines for Caterpillar Built Machines

Valve Actuator (Variable) - Remove
C27 and C32 Engines for Caterpillar Built Machines

Valve Actuator (Variable) - Install
C27 and C32 Engines for Caterpillar Built Machines

Valve Mechanism Cover - Remove and Install - C32
C27 and C32 Engines for Caterpillar Built Machines

Service Magazine

New Rocker Arms Are Available {1123}
2009/02/16

A New Bolt Is Now Available for the Valve Mechanisms on the Engines of Certain Machines {1102}
2009/11/02

Caterpillar Engine Compression Brake Retrofit Upgrade For Off-Highway Trucks {1120, 1129, 1130, 1408, 7610, 7620}
2011/06/06

New Rocker Arm Assemblies Are Available on Some Machines {1123}
2010/02/19

A New Rocker Arm Assembly Is Available for Certain Machine Engines {1123}
2011/03/09

A New Bolt Is Now Used to Secure the Rocker Arm Shaft on the Engines of Certain C27 and C32 Machines {1102, 1123, 1292, 7553}
2010/10/08

A New Bolt Is Now Used to Secure the Rocker Arm Shaft on the Engines of Certain C27 and C32 Machines {1102, 1123, 1292, 7553}
2011/01/24

An Improved Rocker Arm Assembly Is Used on C27 and C32 Machine Engines {1102, 1123}
2013/02/07

Improved Reman Camshafts Are Now Used on Certain C27 and C32 Machines {1209, 1210}
2014/05/30

A New Valve Cover Base and Wiring Harnesses Are Now Used on Certain C27 and C32 Machine Engines {1120, 1408}
2013/12/18

New Rocker Arms Are Used for Certain C27 and C32 Machine Engines {1102, 1123}
2014/05/30

Cat® Reman Has Added Valve Actuators, Valve Lifters, Rocker Arms, and Camshafts for Certain Machine Engines {1121, 1130, 1209, 1210}
2014/09/05

New Guidelines for Valve Cover Base Threaded Insert on C27 and C32 Engines {1107, 1120}
2014/10/27

Updated Torque Requirements for Reman Rocker Arm Adjusting Screw Lock Nuts on Certain C15, C18, C27, and C32 Machine Engines {1123}
2015/03/31

Correct Valve Rocker Arm Usage on C27 and C32 Machine Engines {1123}
2015/09/03

Cat® Reman Announces Changes to the Remanufactured Injector Rocker Arms for 3406E, 3456, C15, C16, C18, C27, and, C32 Machine Engines {1123}
Cat^® Reman Announces Changes to the Remanufactured Injector Rocker Arms for 3406E, 3456, C15, C16, C18, C27, and, C32 Machine Engines {1123}

HOUSING GP-REAR

Specifications

Housing (Rear)
C27 and C32 Engines for Caterpillar Built Machines

Disassembly and Assembly

Housing (Rear) - Remove
C27 and C32 Engines for Caterpillar Built Machines

Housing (Rear) - Install
C27 and C32 Engines for Caterpillar Built Machines

Service Magazine

New Tooling and Installation Process for Crankshaft Seal on C27 and C32 Engines {0701, 1160, 1161}
New Tooling and Installation Process for Crankshaft Seal on C27 and C32 Engines {0701, 1160, 1161}

COVER GP-ENGINE

Reuse And Salvage Guidelines

Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}

Valve Cover Base Threaded Insert Repair {0599, 0676, 0700, 0701, 1107}
Valve Cover Base Threaded Insert Repair {0599, 0676, 0700, 0701, 1107}

ENGINE OVERHAUL KIT

Service Magazine

A New Improved Seal Is Now Used in the Reman Water Pumps in the Engines of Certain Machines {1000, 1361, 7555}
2012/05/10

Truck sale:

Caterpillar 775F
- Off Highway Trucks
CLEVELAND BROTHERS EQUIPMENT COMPANY INC

737,857

Caterpillar 775F, Off Highway Trucks, Construction
- Off Highway Trucks
MILTON CAT

650,000

Caterpillar 775F, Off Highway Trucks, Construction
- Off Highway Trucks
THOMPSON TRACTOR CO., INC.

Caterpillar 775F
- Off Highway Trucks
YANCEY BROS. CO.

Caterpillar 775F
- Off Highway Trucks
CLEVELAND BROTHERS EQUIPMENT COMPANY INC

775F OEM Off-Highway Truck EYG00001-UP (MACHINE) POWERED BY C27 Engine BASIC ENGINE Caterpillar SIS

Parts group 775F:

Information:

Truck sale:

Modal