ELECTRICAL AND STARTING SYSTEM
ELECTRONICS GP-COMMUNICATIONLIGHTING GP
ELECTRONICS GP-MACHINE
LIGHTING GP
CONTROL GP-GRADE
ELECTRICAL AND STARTING SYSTEM
ELECTRONICS GP-COMMUNICATION
#SEBP50560310
380-6092: INSTALLATION AR-COMMUNICATION
380-6092 INSTALLATION AR-COMMUNICATION -PRODUCT LINK
S/N R9W1-UP
GSM
AN ATTACHMENT
S/N R9W1-UP
GSM
AN ATTACHMENT
For full view, you need register
Parts for your 120M 2 MOTOR GRADER:
CATERPILLAR SIS#SEBP50560311
464-6443: INSTALLATION AR-COMMUNICATION
464-6443 INSTALLATION AR-COMMUNICATION -PRODUCT LINK CELLULAR
S/N R9W1-UP
CANNOT BE USED WITH ANY OTHER PRODUCT LINK OPTION
AN ATTACHMENT
S/N R9W1-UP
CANNOT BE USED WITH ANY OTHER PRODUCT LINK OPTION
AN ATTACHMENT
For full view, you need register
Parts for your 120M 2 MOTOR GRADER:
CATERPILLAR SIS#SEBP50560312
464-6805: INSTALLATION AR-COMMUNICATION
464-6805 INSTALLATION AR-COMMUNICATION -PRODUCT LINK SATELLITE
S/N R9W1-UP
CANNOT BE USED WITH ANY OTHER PRODUCT LINK OPTION
AN ATTACHMENT
S/N R9W1-UP
CANNOT BE USED WITH ANY OTHER PRODUCT LINK OPTION
AN ATTACHMENT
For full view, you need register
Parts for your 120M 2 MOTOR GRADER:
CATERPILLAR SIS#SEBP50560313
464-6808: INSTALLATION AR-COMMUNICATION
464-6808 INSTALLATION AR-COMMUNICATION -PRODUCT LINK
S/N R9W1-UP
CANNOT BE USED WITH ANY OTHER PRODUCT LINK OPTION
AN ATTACHMENT
S/N R9W1-UP
CANNOT BE USED WITH ANY OTHER PRODUCT LINK OPTION
AN ATTACHMENT
For full view, you need register
Parts for your 120M 2 MOTOR GRADER:
CATERPILLAR SIS#SEBP50560314
233-3126: INSTALLATION GP-LIGHTING
233-3126 INSTALLATION GP-LIGHTING
S/N R9W1-UP
FLOOD
PART OF 350-8822 OPTION AR-LIGHTING, 365-1335 SNOW AR-MOTOR GRADER
FOR USE WITH @@@@@238-8825@@@@@
AN ATTACHMENT
S/N R9W1-UP
FLOOD
PART OF 350-8822 OPTION AR-LIGHTING, 365-1335 SNOW AR-MOTOR GRADER
FOR USE WITH @@@@@238-8825@@@@@
AN ATTACHMENT
For full view, you need register
Parts for your 120M 2 MOTOR GRADER:
CATERPILLAR SIS#SEBP50560315
238-8827: INSTALLATION GP-SECURITY
238-8827 INSTALLATION GP-SECURITY -MACHINE SECURITY SYSTEM
S/N R9W1-UP
AN ATTACHMENT
S/N R9W1-UP
AN ATTACHMENT
For full view, you need register
Parts for your 120M 2 MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | |
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 2. | 3S-2093 | [2] | STRAP-CABLE | |
| 3. | 198-5389 | [1] | FILM-IDENTIFICATION (IGNITION SWITCH) | |
| 4. | 205-0826 | [1] | FILM-INSTRUCTION (MACHINE SECURITY, CONSOLE) | |
| 5. | 206-5162 J | [2] | KEY AS-ELECTRONIC (SECURITY) | |
| 6. | 206-5208 | [1] | COIL AS (EXCITER) | |
| 102-8802 | [2] | KIT-RECEPTACLE (2-PIN) | ||
| (EACH INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 205-8257 | [1] | COIL AS (EXCITER) | ||
| 7. | 218-0404 | [1] | MODULE GP-INTERFACE (KEY)(MACHINE SECURITY SYSTEM) | |
| 8. | 219-6314 | [2] | KEY RING (IDENTIFICATION) | |
| 11. | 238-8813 | [1] | HARNESS AS-CHASSIS (MACHINE SECURITY SYSTEM) | |
| 8T-8729 | [6] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8730 | [10] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8737 | [2] | PLUG-SEAL | ||
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 155-2265 | [1] | KIT-CONNECTING PLUG (8-PIN) | ||
| 155-2270 | [2] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS,WEDGE,& INTERFACE SEAL) | ||||
| 12. | 242-3282 | [1] | LAMP AS-LED (24-VOLT, RED) | |
| 14. | 204-0813 | [2] | BOLT (M6X1X40-MM) | |
| 15. | 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | |
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 16. | 8C-5607 | [4] | MOUNT-ISOLATION | |
| 17. | 8C-5608 | [2] | SPACER (6.5X9.5X25.4-MM THK) | |
| 18. | 9X-6165 | [4] | WASHER (6.5X22X2.5-MM THK) | |
| J | REQUIRES CORPORATE KEY | |||
#SEBP50560316
310-2078: INSTALLATION GP-WARNING BEACON
310-2078 INSTALLATION GP-WARNING BEACON
S/N R9W1-UP
PART OF 353-3310 ROADING AR
AN ATTACHMENT
S/N R9W1-UP
PART OF 353-3310 ROADING AR
AN ATTACHMENT
For full view, you need register
Parts for your 120M 2 MOTOR GRADER:
CATERPILLAR SIS#SEBP50560317
361-3137: INSTALLATION GP-WARNING BEACON
361-3137 INSTALLATION GP-WARNING BEACON
S/N R9W1-UP
PART OF 393-1562 SNOW AR-MOTOR GRADER
FOR USE WITH @@@@@338-1132@@@@@
AN ATTACHMENT
S/N R9W1-UP
PART OF 393-1562 SNOW AR-MOTOR GRADER
FOR USE WITH @@@@@338-1132@@@@@
AN ATTACHMENT
For full view, you need register
Parts for your 120M 2 MOTOR GRADER:
CATERPILLAR SIS#SEBP50560318
383-9910: KIT-RETROFIT
383-9910 KIT-RETROFIT
S/N R9W1-UP
FOR USE WITH ALL 12M AND 120 M SERIES II MOTORGRADER MACHINES
FIELD INSTALLATION
S/N R9W1-UP
FOR USE WITH ALL 12M AND 120 M SERIES II MOTORGRADER MACHINES
FIELD INSTALLATION
For full view, you need register
Parts for your 120M 2 MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 474-5410 Y | [1] | HARNESS AS-SENSOR (ROTATION SENSOR) | ||
| 448-1938 Y | [1] | HARNESS AS-SENSOR (INCLINATION) | ||
| 288-0693 | [4] | BLOCK | ||
| 5P-4135 | [1] | BOLT (3/4-10X8-IN) | ||
| 8C-6857 | [4] | BOLT (3/4-10X2.75-IN) | ||
| 8T-4136 M | [4] | BOLT (M10X1.5X25-MM) | ||
| 8T-4137 M | [19] | BOLT (M10X1.5X20-MM) | ||
| 8T-4186 M | [1] | BOLT (M10X1.5X40-MM) | ||
| 8T-4192 M | [1] | BOLT (M12X1.75X25-MM) | ||
| 8T-4194 M | [4] | BOLT (M12X1.75X50-MM) | ||
| 8T-4196 M | [2] | BOLT (M10X1.5X35-MM) | ||
| 1J-6762 | [4] | BOLT-PLOW (3/4-10X3-IN) | ||
| 236-8826 | [4] | BOSS (1-1/8-18X0.708-IN) | ||
| 255-3482 | [1] | BRACKET | ||
| 327-0560 | [1] | BRACKET (RH) | ||
| 327-0561 | [1] | BRACKET (LH) | ||
| 356-3629 | [1] | BRACKET | ||
| 298-3644 | [1] | BRACKET AS | ||
| 511-2430 | [1] | BRACKET AS (LH) | ||
| 511-2431 | [1] | BRACKET AS (RH) | ||
| 319-5176 | [2] | BRACKET AS | ||
| (EACH INCLUDES) | ||||
| 8T-3490 M | [1] | NUT-WELD (M10X1.5-THD) | ||
| 448-1893 | [1] | BRACKET AS | ||
| 127-9323 | [1] | BRACKET AS | ||
| 8T-3490 M | [1] | NUT-WELD (M10X1.5-THD) | ||
| 4P-7581 | [3] | CLIP (LADDER) | ||
| 6D-4246 | [2] | CLIP (LOOP) | ||
| 8M-2773 | [5] | CLIP (LOOP) | ||
| 9X-8250 | [4] | CLIP (LOOP) | ||
| 130-5300 | [2] | CLIP | ||
| 169-5414 | [1] | CLIP | ||
| 223-3490 | [1] | CLIP | ||
| 8M-2770 | [5] | CLIP (LOOP) | ||
| 5K-3294 | [1] | CLIP (SLOT) | ||
| 356-3637 | [1] | HARNESS AS-CHASSIS | ||
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 7R-3029 | [4] | CAP-DUST | ||
| 8T-8737 | [3] | PLUG-SEAL | ||
| 9W-0844 | [4] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 9W-0852 | [2] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 9X-3401 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-3402 | [8] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-4385 | [1] | PLUG AS-CONNECTOR (6-PIN) | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(39-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(115-CM) | |||
| 134-2540 | [1] | RECEPTACLE AS-CONNECTOR (3-PIN) | ||
| 155-2255 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| 174-0503 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 228-3323 | [4] | CLIP-SPRING | ||
| 243-5362 | [1] | CAP-DUST | ||
| 369-0950 | [1] | HARNESS AS-CHASSIS (BLADE) | ||
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 165-0017 G | [1] | HOSE (101-IN) | ||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8730 | [2] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8737 | [1] | PLUG-SEAL | ||
| 9W-0844 | [2] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 9X-3401 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-3402 | [6] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(30-CM) | |||
| 134-2540 | [1] | RECEPTACLE AS-CONNECTOR (3-PIN) | ||
| 155-2271 | [2] | KIT-CONNECTING PLUG (4-PIN) | ||
| 174-0503 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 210-8958 E | TUBE-HEAT SHRINK (24-MM DIA)(16-CM) | |||
| 368-2369 B | TAPE | |||
| 368-2370 B | TAPE | |||
| 1K-6870 | [1] | LOCKNUT (3/4-10-THD) | ||
| 096-4883 M | [4] | LOCKNUT (M10X1.5-THD) | ||
| 344-5675 M | [1] | NUT (M10X1.5-THD) | ||
| 329-3356 M | [1] | NUT (M12X1.75-THD) | ||
| 2J-3506 | [4] | NUT-FULL (3/4-10-THD) | ||
| 132-8487 | [4] | NUT-RING | ||
| 287-6688 | [2] | PLATE | ||
| 125-8534 | [1] | PLATE AS | ||
| 288-5515 | [1] | PLATE AS | ||
| 288-5516 | [1] | PLATE AS | ||
| 107-1716 | [16] | SCREW (4-1/2-40X0.63-IN) | ||
| 8C-8585 M | [2] | SCREW-BUTTON HEAD (M10X1.5X20-MM) | ||
| 131-3539 M | [4] | SCREW-FLAT HEAD (M8X1.25X30-MM) | ||
| 9C-5344 | [3] | SPACER (10.5X20X18-MM THK) | ||
| 174-9692 | [4] | SPACER (20.5X35X16-MM THK) | ||
| 7K-1181 | [24] | STRAP-CABLE | ||
| 251-1133 | [1] | TUBE | ||
| 8T-4123 | [4] | WASHER (22X35X3.5-MM THK) | ||
| 5P-1076 | [8] | WASHER-HARD (13.5X30X4-MM THK) | ||
| 8T-4121 | [39] | WASHER-HARD (11X21X2.5-MM THK) | ||
| 8T-4223 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | ||
| 111-9251 | [4] | WASHER-HARD (20X35X1.6-MM THK) | ||
| B | USE AS REQUIRED | |||
| E | ORDER BY THE CENTIMETER | |||
| G | ORDER BY THE INCH | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP50560319
441-4489: KIT-RETROFIT
441-4489 KIT-RETROFIT -FRONT WINDOW, HEATED
S/N R9W1-UP
REFER TO SPECIAL INSTRUCTIONS REHS7155 FOR INSTALLATION OF KIT
FIELD INSTALLATION
S/N R9W1-UP
REFER TO SPECIAL INSTRUCTIONS REHS7155 FOR INSTALLATION OF KIT
FIELD INSTALLATION
For full view, you need register
Parts for your 120M 2 MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 294-1018 | [2] | BRACKET | ||
| 376-1386 | [1] | HARNESS AS-WIRING | ||
| 7T-6364 | [2] | TERMINAL-BLADE (12-GA TO 16-GA) | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(21-CM) | |||
| 126-1766 | [2] | SOCKET-CONNECTOR (14-GA TO 18-GA) | ||
| 9X-3402 | [1] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [1] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| (INCLUDES PLUG AS & WEDGE) | ||||
| 329-3734 E | TAPE-ELECTRICAL (14-CM) | |||
| 9X-2045 M | [6] | SCREW-TRUSS HEAD (M6X1X20-MM) | ||
| 294-1015 E | SEAL (52-CM) | |||
| 294-1014 E | SEAL-GLASS (180-CM) | |||
| 7K-1181 | [1] | STRAP-CABLE | ||
| 114-6658 | [6] | WASHER (6.5X17X1-MM THK) | ||
| 380-3885 | [1] | WINDOW AS-FRONT (HEATED) | ||
| 126-1768 | [2] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| (INCLUDES PLUG AS & WEDGE) | ||||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
Information:
ELECTRICAL AND STARTING SYSTEM
ELECTRONICS GP-COMMUNICATION
Special Instruction
Diagnostic Code Information for Caterpillar <SUP>®</SUP> Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Diagnostic Code Information for Caterpillar ® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Diagnostic Code Information for Caterpillar ® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Service Magazine
