255-8000 CYLINDER GP-HYDRAULIC -TELESCOPING S/N R9W1-UP PART OF 275-5873 MAST GP AN ATTACHMENT 120M 2



HYDRAULIC SYSTEM
CYLINDER GP
WORK TOOLS
GROUND ENGAGING TOOLS (G.E.T.)
BLADE GP

MOTOR GRADER 120M 2 MOTOR GRADER R9W
 120M Series 2 Motor Grader - All Wheel Drive R9W00001-UP (MACHINE) POWERED BY C7.1 Engine SEBP5056 120M 2 R9W   (2011)

HYDRAULIC SYSTEM

CYLINDER GP
CYLINDER GP-WHEEL LEAN
249-5299 CYLINDER GP-WHEEL LEAN
CYLINDER GP-HYDRAULIC
217-3501 CYLINDER GP-HYDRAULIC
CYLINDER GP-HYDRAULIC
255-8000 CYLINDER GP-HYDRAULIC
CYLINDER GP-HYDRAULIC
277-3811 CYLINDER GP-HYDRAULIC
CYLINDER GP-HYDRAULIC
277-3836 CYLINDER GP-HYDRAULIC
 

#SEBP50561060
 

255-8000: CYLINDER GP-HYDRAULIC

255-8000 CYLINDER GP-HYDRAULIC -TELESCOPING
S/N R9W1-UP
PART OF 275-5873 MAST GP
AN ATTACHMENT
i03344340 SEBP5056
2558000 CYLINDER GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 120M 2 MOTOR GRADER:

Pos. Part No Qty Parts name Comments
1. 108-3344 [1] PLUG  
2. 259-9082 [1] TUBE-PISTON  
3. 259-9083 [1] TUBE-PISTON  
4. 259-9084 [1] TUBE-PISTON  
5. 259-9085 [1] TUBE  
6. 259-9086 [1] PLATE-SEAL  
7. 259-9087 [1] PISTON  
8. 259-9088 [1] PISTON  
9. 259-9089 [1] GLAND  
10. 259-9090 [1] GLAND  
11. 259-9091 [1] BUSHING  
12. 259-9092 [1] BUSHING  
13. 259-9093 [1] PLUG AS  
  3K-0360 [1] SEAL-O-RING  
  9S-4185 [1] PLUG (3/4-16-THD)  
14. 259-9094 [1] PLUG AS  
  2M-9780 [1] SEAL-O-RING  
  9S-4190 [1] PLUG-O-RING (7/8-14-THD)  
15. 259-9095 [1] VALVE-COUNTERBALANCE  
16. 8T-6757 [1] PLUG-PIPE  
17. 3H-3986 [2] PLUG-PIPE  
   
    AVAILABLE REPAIR KIT(S):
  490-0659 [1] KIT-PACKING  
 

#SEBP50561061
 

277-3811: CYLINDER GP-HYDRAULIC

277-3811 CYLINDER GP-HYDRAULIC
S/N R9W1-UP
89-MM (3.5-IN) BORE X 565.5-MM (22.3-IN) STROKE
PART OF 275-5877 LINK GP-LIFT
AN ATTACHMENT
i03343703 SEBP5056
2773811 CYLINDER GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 120M 2 MOTOR GRADER:

Pos. Part No Qty Parts name Comments
1. 2K-7468 [1] LOCKNUT (1-1/4-12-THD)  
2. 105-8117 Y [1] VALVE GP-COUNTERBALANCE (HYDRAULIC CYLINDER)  
3. 108-3344 [3] PLUG  
4. 2F-5326 [1] SETSCREW (3/8-16X0.375-IN)  
5. 112-8616 [1] VALVE GP-CHECK  
5A. 5P-2199 [1] RING-BACKUP  
5B. 6V-3505 [1] RING-BACKUP  
5C. 033-6043 [1] SEAL-O-RING  
5D. 135-2652 [1] SEAL-O-RING  
6. 172-9265 [1] PISTON  
7. 243-4961 [1] SEAL  
8. 277-5529 [1] ROD AS-PISTON  
9. 277-5530 [1] TUBE AS  
10. 277-5533 [1] VALVE-RELIEF  
   
    AVAILABLE REPAIR KIT(S):
  240-1881 [1] KIT-SEAL (HYDRAULIC CYLINDER)  
    (INCLUDES O-RING SEALS, BACK-UP RINGS, WEAR RINGS, SEAL AS, BUFFER SEAL AS, U-CUP SEAL, WIPER SEAL)
  Y   SEPARATE ILLUSTRATION
 

#SEBP50561062
 

277-3836: CYLINDER GP-HYDRAULIC

277-3836 CYLINDER GP-HYDRAULIC -SNOW WING
S/N R9W1-UP
76.2-MM (3-IN) BORE X 762-MM (30-IN) STROKE
PART OF 337-2921 SUPPORT GP-WORK TOOL
AN ATTACHMENT
i03356560 SEBP5056
2773836 CYLINDER GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 120M 2 MOTOR GRADER:

Pos. Part No Qty Parts name Comments
1. 2K-7468 [1] LOCKNUT (1-1/4-12-THD)  
2. 108-3344 [2] PLUG  
3. 277-5535 [1] ROD AS-PISTON  
4. 277-5536 [1] TUBE AS  
5. 277-5537 [1] PISTON  
6. 277-5538 [1] SEAL  
7. 2F-5326 [1] SETSCREW (3/8-16X0.375-IN)  
   
    AVAILABLE REPAIR KIT(S):
  240-2016 [1] KIT-SEAL (HYDRAULIC CYLINDER)  
    (KIT INCLUDES O-RING SEAL, SEAL AS, BACK-UP RING, WEAR RING, BUFFER SEAL AS, U-CUP SEAL & WIPER SEAL)
 

#SEBP50561063
 

233-7139: EDGE GP-CUTTING

233-7139 EDGE GP-CUTTING
S/N R9W1-UP
PART OF 349-3046 OPTION AR-WORK TOOL
FOR USE WITH @@@@@243-6702@@@@@
CANNOT BE USED WITH @@@@@233-7143@@@@@
AN ATTACHMENT
i02238879 SEBP5056
  For full view, you need register

Parts for your 120M 2 MOTOR GRADER:

Pos. Part No Qty Parts name Comments
  5J-4773 [26] BOLT-PLOW (3/4-10X2.5-IN)  
  9J-3657 [2] EDGE-CUTTING (6-FT EACH)  
  2J-3506 [26] NUT-FULL (3/4-10-THD)  
 

#SEBP50561064
 

233-7143: EDGE GP-CUTTING

233-7143 EDGE GP-CUTTING
S/N R9W1-UP
PART OF 349-3047, 349-3048 OPTION AR-WORK TOOL
FOR USE WITH @@@@@243-6703@@@@@, @@@@@243-6704@@@@@
AN ATTACHMENT
i02203617 SEBP5056
  For full view, you need register

Parts for your 120M 2 MOTOR GRADER:

Pos. Part No Qty Parts name Comments
  5J-4773 [30] BOLT-PLOW (3/4-10X2.5-IN)  
  7D-1577 [2] EDGE-CUTTING (7-FT EACH)  
  2J-3506 [30] NUT-FULL (3/4-10-THD)  
 

#SEBP50561065
 

110-5327: EXTENSION GP-BLADE

110-5327 EXTENSION GP-BLADE -LH
S/N R9W1-UP
2-FT
FOR USE WITH @@@@@243-6704@@@@@
CANNOT BE USED WITH @@@@@250-0615@@@@@, @@@@@349-3046@@@@@, @@@@@349-3047@@@@@, @@@@@452-3133@@@@@
AN ATTACHMENT
i00123136 SEBP5056
1105327 EXTENSION GP-BLADE Parts scheme
  For full view, you need register

Parts for your 120M 2 MOTOR GRADER:

Pos. Part No Qty Parts name Comments
1. 133-7524 [1] EXTENSION  
2. 3G-2165 [1] EDGE-CUTTING  
3. 452-3134 [1] PLATE AS  
4. 110-5334 [3] SPACER (3-MM THK)  
5. 110-5335 [1] ANGLE AS  
6. 5F-8933 [10] BOLT-PLOW (3/4-10X3.75-IN)  
7. 2J-3506 [15] NUT-FULL (3/4-10-THD)  
8. 5J-4773 [5] BOLT-PLOW (3/4-10X2.5-IN)  
9. 2A-1538 [2] BOLT (3/4-10X2.25-IN)  
10. 2S-0115 [2] WASHER-HARD (20X36.5X5-MM THK)  
11. 176-5642 B [1] SPACER (2-MM THK)  
12. 176-5643 B [2] SPACER (1-MM THK)  
  B   USE AS REQUIRED
 

#SEBP50561066
 

250-0615: EXTENSION GP-BLADE

250-0615 EXTENSION GP-BLADE -LH
S/N R9W1-UP
2-FT
FOR USE WITH @@@@@243-6702@@@@@, @@@@@243-6703@@@@@
CANNOT BE USED WITH @@@@@110-5327@@@@@, @@@@@349-3048@@@@@
AN ATTACHMENT
i02240663 SEBP5056
2500615 EXTENSION GP-BLADE Parts scheme
  For full view, you need register

Parts for your 120M 2 MOTOR GRADER:

Pos. Part No Qty Parts name Comments
1. 110-5334 [2] SPACER (3-MM THK)  
2. 110-5335 [1] ANGLE AS  
3. 176-5642 B [1] SPACER (2-MM THK)  
4. 176-5643 B [2] SPACER (1-MM THK)  
5. 232-2146 [1] EDGE-CUTTING  
6. 250-0613 [1] EXTENSION  
7. 452-3135 [1] PLATE AS  
8. 2J-3506 [15] NUT-FULL (3/4-10-THD)  
9. 2S-0115 [2] WASHER-HARD (20X36.5X5-MM THK)  
10. 5F-8933 [10] BOLT-PLOW (3/4-10X3.75-IN)  
11. 5J-4773 [5] BOLT-PLOW (3/4-10X2.5-IN)  
12. 9X-8885 [2] BOLT (3/4-10X2.25-IN)  
  B   USE AS REQUIRED
 

#SEBP50561067
 

452-3132: EXTENSION GP-BLADE

452-3132 EXTENSION GP-BLADE -LH
S/N R9W1-UP
2-FT
CANNOT BE USED WITH ANY OTHER EXTENSION GP, ACCUGRADE AR, GRADER AR, 12-FT BLADE PACKAGE, 14-FT BLADE PACKAGE
AN ATTACHMENT
i05727990 SEBP5056
4523132 EXTENSION GP-BLADE Parts scheme
  For full view, you need register

Parts for your 120M 2 MOTOR GRADER:

Pos. Part No Qty Parts name Comments
1. 133-7524 [1] EXTENSION  
2. 3G-2165 [1] EDGE-CUTTING  
3. 452-3134 [1] PLATE AS  
4. 110-5334 [3] SPACER (3-MM THK)  
5. 452-3137 [1] ANGLE AS  
6. 5F-8933 [10] BOLT-PLOW (3/4-10X3.75-IN)  
7. 2J-3506 [15] NUT-FULL (3/4-10-THD)  
8. 5J-4773 [5] BOLT-PLOW (3/4-10X2.5-IN)  
9. 2A-1538 [2] BOLT (3/4-10X2.25-IN)  
10. 2S-0115 [2] WASHER-HARD (20X36.5X5-MM THK)  
11. 176-5642 B [1] SPACER (2-MM THK)  
12. 176-5643 B [2] SPACER (1-MM THK)  
  B   USE AS REQUIRED
 

#SEBP50561068
 

452-3133: EXTENSION GP-BLADE

452-3133 EXTENSION GP-BLADE -LH
S/N R9W1-UP
2-FT
CANNOT BE USED WITH ANY OTHER EXTENSION GP, ACCUGRADE AR, GRADER AR, 14-FT BLADE PACKAGE
AN ATTACHMENT
i05727977 SEBP5056
4523133 EXTENSION GP-BLADE Parts scheme
  For full view, you need register

Parts for your 120M 2 MOTOR GRADER:

Pos. Part No Qty Parts name Comments
1. 110-5334 [2] SPACER (3-MM THK)  
2. 452-3137 [1] ANGLE AS  
3. 176-5642 B [1] SPACER (2-MM THK)  
4. 176-5643 B [2] SPACER (1-MM THK)  
5. 232-2146 [1] EDGE-CUTTING  
6. 250-0613 [1] EXTENSION  
7. 452-3135 [1] PLATE AS  
8. 2J-3506 [15] NUT-FULL (3/4-10-THD)  
9. 2S-0115 [2] WASHER-HARD (20X36.5X5-MM THK)  
10. 5F-8933 [10] BOLT-PLOW (3/4-10X3.75-IN)  
11. 5J-4773 [5] BOLT-PLOW (3/4-10X2.5-IN)  
12. 9X-8885 [2] BOLT (3/4-10X2.25-IN)  
  B   USE AS REQUIRED
 

#SEBP50561069
 

524-8603: EXTENSION GP-BLADE

524-8603 EXTENSION GP-BLADE
S/N R9W1-UP
BLADE EXTENSION ATTACHMENT KIT
FIELD INSTALLATION
i06921555 SEBP5056
  For full view, you need register

Parts for your 120M 2 MOTOR GRADER:

Pos. Part No Qty Parts name Comments
  452-3137 [1] ANGLE AS  
  2A-1538 [2] BOLT (3/4-10X2.25-IN)  
  5F-8933 [10] BOLT-PLOW (3/4-10X3.75-IN)  
  5J-4773 [5] BOLT-PLOW (3/4-10X2.5-IN)  
  232-2146 [1] EDGE-CUTTING  
  250-0613 [1] EXTENSION  
  2J-3506 [15] NUT-FULL (3/4-10-THD)  
  452-3135 [1] PLATE AS  
  110-5334 [2] SPACER (3-MM THK)  
  176-5642 [1] SPACER (2-MM THK)  
  176-5643 [2] SPACER (1-MM THK)  
  2S-0115 [2] WASHER-HARD (20X36.5X5-MM THK)  
 

Information:

Tool Operating Manual
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}

Caterpillar Parts SIS Catalog 120M 2 :

CYLINDER GP-HYDRAULIC
217-3501 CYLINDER GP-HYDRAULIC
BRACKET GP-SCARIFIER
252-0931 BRACKET GP-SCARIFIER
BRACKET GP-MOUNTING
335-3028 BRACKET GP-MOUNTING
BRACKET GP-MOUNTING
275-5879 BRACKET GP-MOUNTING
BRACE GP
293-5559 BRACE GP
BLADE GP
275-5875 BLADE GP
BLADE GP
243-6704 BLADE GP
BLADE GP
243-6703 BLADE GP
CYLINDER GP-HYDRAULIC
277-3811 CYLINDER GP-HYDRAULIC
CYLINDER GP-HYDRAULIC
277-3836 CYLINDER GP-HYDRAULIC
233-7139 EDGE GP-CUTTING
233-7143 EDGE GP-CUTTING
EXTENSION GP-BLADE
110-5327 EXTENSION GP-BLADE
EXTENSION GP-BLADE
250-0615 EXTENSION GP-BLADE
EXTENSION GP-BLADE
452-3132 EXTENSION GP-BLADE
EXTENSION GP-BLADE
452-3133 EXTENSION GP-BLADE

Truck sale:

 
212,000 
Caterpillar 120M2, Construction
- motor graders

Caterpillar 120M2, Construction
317,000 
Caterpillar 120M2, Construction
- motor graders
HOLT CAT
 
On Request 
Caterpillar 120M2, Construction
- motor graders
BERGERAT MONNOYEUR S.A.S.
France
 
 
Caterpillar 120M2, Construction
- motor graders
KELLY TRACTOR CO.
 
 
Caterpillar 120M2, Construction
- motor graders
KELLY TRACTOR CO.