AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

331-5222 COVER GP-SHIPPING -TRANSMISSION S/N R3D1-UP; ZBE1-UP PART OF 364-8476, 396-3357 TRANSMISSION AR 140M 2


POWER TRAIN
TRANSMISSION GP
DIFFERENTIAL & BEVEL GEAR GP
DRIVE GP-FINAL
FILLER GP-POWER TRAIN OIL
FILTER GP

MOTOR GRADER 140M 2 MOTOR GRADER M9D
 140M Series 2 Motor Grader M9D00001-UP (MACHINE) POWERED BY C9.3 Engine SEBP5059 140M 2 M9D   (2010)

POWER TRAIN

TRANSMISSION GP
CLUTCH GP-TRANSMISSION
247-8303 CLUTCH GP-TRANSMISSION
CLUTCH GP-TRANSMISSION
364-8475 CLUTCH GP-TRANSMISSION
COVER GP-SHIPPING
331-5222 COVER GP-SHIPPING
SHAFT GP-INPUT
305-2148 SHAFT GP-INPUT
TRANSMISSION AR
364-8476 TRANSMISSION AR
396-3357 TRANSMISSION AR
 

#SEBP50590610
 

331-5222: COVER GP-SHIPPING

331-5222 COVER GP-SHIPPING -TRANSMISSION
S/N R3D1-UP; ZBE1-UP
PART OF 364-8476, 396-3357 TRANSMISSION AR
i04017665 SEBP5059
3315222 COVER GP-SHIPPING Parts scheme
  For full view, you need register

Parts for your 140M 2 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4137 M [6] BOLT (M10X1.5X20-MM)  
2. 7J-3554 [1] COVER  
4. 9H-0846 [1] SEAL-O-RING  
5. 117-2927 [1] COVER-SHIPPING  
6. 126-1773 [1] CAP-CONNECTOR  
9. 179-1539 [1] GASKET  
11. 148-8406 [2] PLUG AS  
    (EACH INCLUDES)
  9S-9334 [1] PLUG  
  7M-8485 [1] SEAL-O-RING  
12. 148-8407 [2] PLUG AS  
    (EACH INCLUDES)
  9S-4191 [1] PLUG (9/16-18-THD)  
  3J-1907 [1] SEAL-O-RING  
13. [1] PLUG AS  
  9S-4183 [1] PLUG (1-1/16-12-THD)  
  3D-2824 [1] SEAL-O-RING  
16. 179-1538 [1] COVER  
17. 2D-0094 [1] GASKET  
18. 5P-8245 [10] WASHER-HARD (13.5X25.5X3-MM THK)  
19. 6V-3823 M [10] BOLT (M12X1.75X60-MM)  
20. 6V-8149 M [10] NUT (M12X1.75-THD)  
21. 6V-9833 [1] CAP  
22. 8T-0293 M [2] BOLT (M12X1.75X20-MM)  
23. 8E-5287 [1] STRAP  
24. 9M-2904 [1] CLAMP-HOSE  
  M   METRIC PART
 

#SEBP50590611
 

365-2124: DIFFERENTIAL & BEVEL GEAR GP

365-2124 DIFFERENTIAL & BEVEL GEAR GP
S/N M9D1-UP
PART OF 365-2125 AXLE GP-REAR
i04081530 SEBP5059
3652124 DIFFERENTIAL & BEVEL GEAR GP Parts scheme
  For full view, you need register

Parts for your 140M 2 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7D-1677 [1] RACE-BEARING INNER  
2. 1J-2860 [1] CUP-BEARING  
3. 2D-9455 [1] CONE-BEARING  
4. 7S-4001 [1] SEAL-O-RING  
5. 201-7713 [1] BEARING AS  
6. 201-8481 [1] LOCKNUT AS  
  314-3260 [4] BOLT-LOCKING (M8X1.25X18-MM)  
7. 222-7843 [1] SHROUD  
8. 264-0575 [1] SEAL-LIP TYPE  
9. 272-7121 [1] YOKE AS  
  271-8680 [1] GUARD  
10. 271-8528 B [1] SHIM PACK (INCLUDES 18-SHIMS)  
11. 271-8529 [1] RETAINER  
12. 272-7116 [1] HOUSING-PINION  
13. 287-8223 Y [1] DIFFERENTIAL GP  
14. 293-0213 [1] SHAFT-BEVEL PINION  
15. 290-7296 M [20] BOLT (M16X2X40-MM)  
16. 309-8763 [1] GEAR-BEVEL (44-TEETH)  
17. 5A-3604 M [3] BOLT-SOCKET HEAD (M8X1.25X25-MM)  
18. 1J-4757 [1] CONE-BEARING  
19. 2D-9454 [1] CUP-BEARING  
20. 8C-0622 [1] RING-RETAINING  
21. 286-9155 M [1] BOLT-SELF-LOCKING (M16X2X120-MM)  
22. 9X-8268 [20] WASHER (17.5X30X3.5-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP50590612
 

287-8223: DIFFERENTIAL GP

287-8223 DIFFERENTIAL GP
S/N M9D1-UP
PART OF 365-2124 DIFFERENTIAL & BEVEL GEAR GP
i02781065 SEBP5059
2878223 DIFFERENTIAL GP Parts scheme
  For full view, you need register

Parts for your 140M 2 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5F-9144 [3] SEAL-O-RING  
2. 148-7841 [3] SPRING  
3. 201-8476 [9] PLATE-SEPARATOR  
4. 201-8477 [9] DISC-FRICTION  
5. 201-8480 [1] PLATE-THRUST  
6. 221-8040 [3] DOWEL  
7. 239-3105 [1] RING-THRUST  
8. 287-8222 [1] CASE AS-DIFFERENTIAL  
8A. 8T-5002 M [8] BOLT (M16X2X180-MM)  
8B. 2S-0736 [8] WASHER-HARD (17X27X3.5-MM THK)  
9. 293-5368 [4] BUSHING  
10. 305-3353 [2] WASHER-THRUST  
11. 305-3352 [4] WASHER-THRUST  
12. 306-5622 [1] SPIDER  
13. 306-5628 [1] GEAR-DIFFERENTIAL BEVEL (44-TEETH)  
14. 306-5629 [1] GEAR-DIFFERENTIAL BEVEL (16-TEETH)  
15. 306-5635 [4] PINION-DIFFERENTIAL  
   
    PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY
  M   METRIC PART
 

#SEBP50590613
 

288-6508: DRIVE GP-FINAL

288-6508 DRIVE GP-FINAL -RH
S/N M9D1-UP
PART OF 365-2125 AXLE GP-REAR
i02781095 SEBP5059
2886508 DRIVE GP-FINAL Parts scheme
  For full view, you need register

Parts for your 140M 2 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4B-8394 [2] CUP-BEARING  
2. 547-6515 [1] WASHER-THRUST (261.8X309X7-MM THK)  
3. 7D-8439 B [5] SHIM (0.007-IN THK)  
4. 7D-8441 B [5] SHIM (0.005-IN THK)  
5. 8D-3902 [1] SEAL-LIP TYPE  
6. 9D-3075 [1] RETAINER  
7. 9D-7047 B [2] SHIM (0.02-MM THK)  
8. 202-6473 M [30] BOLT (M16X2X60-MM)  
9. 255-8575 [1] SHAFT-DRIVE  
10. 264-0194 [1] RETAINER  
11. 264-0196 B [1] SHIM PACK (INCLUDES 10-SHIMS)  
12. 266-0199 [2] RING-WEAR  
14. 272-8009 Y [1] CARRIER GP-FINAL DRIVE  
15. 278-3320 [2] SPROCKET  
16. 279-2568 [1] GEAR-RING (84-TEETH)  
17. 329-0411 [1] SEAL-LIP TYPE  
18. 284-5016 [1] HOUSING  
19. 291-6874 [1] HOUSING-FINAL DRIVE  
20. 6V-3303 M [3] BOLT (M16X2X60-MM)  
21. 198-4768 [24] WASHER-HARD (17.5X32X8-MM THK)  
22. 2B-9174 [1] BEARING AS-TAPERED ROLLER  
23. 4D-3704 [18] WASHER-HARD (17X30X5-MM THK)  
24. 4D-6695 [1] SEAL-O-RING  
25. 5P-8245 [3] WASHER-HARD (13.5X25.5X3-MM THK)  
26. 6V-2449 [1] CONE-BEARING  
27. 8T-0372 M [3] BOLT (M12X1.75X90-MM)  
28. 8T-3727 [1] RING-RETAINING  
29. 9F-2247 [1] PLUG-PIPE  
30. 178-3707 M [12] BOLT (M16X2X50-MM)  
31. 328-9669 [1] WASHER-THRUST (261.8X303X7-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP50590614
 

288-6509: DRIVE GP-FINAL

288-6509 DRIVE GP-FINAL -LH
S/N M9D1-UP
PART OF 365-2125 AXLE GP-REAR
i02781094 SEBP5059
2886509 DRIVE GP-FINAL Parts scheme
  For full view, you need register

Parts for your 140M 2 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4B-8394 [2] CUP-BEARING  
2. 547-6515 [1] WASHER-THRUST (261.8X309X7-MM THK)  
3. 7D-8439 B [5] SHIM (0.007-IN THK)  
  7D-8441 BF [5] SHIM (0.005-IN THK)  
5. 8D-3902 [1] SEAL-LIP TYPE  
6. 9D-3075 [1] RETAINER  
7. 9D-7047 B [2] SHIM (0.02-MM THK)  
8. 202-6473 M [30] BOLT (M16X2X60-MM)  
9. 255-8575 [1] SHAFT-DRIVE  
10. 264-0194 [1] RETAINER  
11. 264-0196 B [1] SHIM PACK (INCLUDES 10-SHIMS)  
12. 266-0199 [2] RING-WEAR  
14. 272-8009 Y [1] CARRIER GP-FINAL DRIVE  
15. 278-3320 [2] SPROCKET  
16. 279-2568 [1] GEAR-RING (84-TEETH)  
17. 329-0411 [1] SEAL-LIP TYPE  
18. 284-5018 [1] HOUSING  
19. 291-6874 [1] HOUSING-FINAL DRIVE  
20. 6V-3303 M [3] BOLT (M16X2X60-MM)  
21. 198-4768 [24] WASHER-HARD (17.5X32X8-MM THK)  
22. 2B-9174 [1] BEARING AS-TAPERED ROLLER  
23. 4D-3704 [18] WASHER-HARD (17X30X5-MM THK)  
24. 4D-6695 [1] SEAL-O-RING  
25. 5P-8245 [3] WASHER-HARD (13.5X25.5X3-MM THK)  
26. 6V-2449 [1] CONE-BEARING  
27. 8T-0372 M [3] BOLT (M12X1.75X90-MM)  
28. 8T-3727 [1] RING-RETAINING  
29. 9F-2247 [1] PLUG-PIPE  
30. 178-3707 M [12] BOLT (M16X2X50-MM)  
31. 328-9669 [1] WASHER-THRUST (261.8X303X7-MM THK)  
  B   USE AS REQUIRED
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP50590615
 

349-6137: FILLER GP-POWER TRAIN OIL

349-6137 FILLER GP-POWER TRAIN OIL
S/N M9D1-UP
PART OF 349-6146 POWER TRAIN AR
i03934091 SEBP5059
3496137 FILLER GP-POWER TRAIN OIL Parts scheme
  For full view, you need register

Parts for your 140M 2 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 397-1180 [1] TUBE AS  
2. 8B-1615 [1] GASKET  
 

#SEBP50590616
 

349-6138: FILLER GP-POWER TRAIN OIL

349-6138 FILLER GP-POWER TRAIN OIL -HYDROSTATIC
S/N M9D1-UP
PART OF 353-2919 COMMON AR
i03934051 SEBP5059
3496138 FILLER GP-POWER TRAIN OIL Parts scheme
  For full view, you need register

Parts for your 140M 2 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9G-5127 [1] BREATHER (ATMOSPHERIC)(POWER TRAIN OIL FILLER)  
2. 254-3286 [1] GAUGE AS-OIL LEVEL (DIPSTICK) (POWER TRAIN OIL)  
3. 397-1181 [1] TUBE AS  
4. 3N-2945 [1] GASKET  
5. 7J-8611 [1] ELBOW-PIPE  
6. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
7. 8T-4196 M [2] BOLT (M10X1.5X35-MM)  
  M   METRIC PART
 

#SEBP50590617
 

250-8292: FILTER & MTG GP-TRANSMISSION

250-8292 FILTER & MTG GP-TRANSMISSION
S/N R3D1-2758; ZBE1-672
PART OF 364-8476, 396-3357 TRANSMISSION AR
i03855112 SEBP5059
2508292 FILTER & MTG GP-TRANSMISSION Parts scheme
  For full view, you need register

Parts for your 140M 2 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 289-2047 [1] PLATE AS  
2. CY [1] FILTER GP-OIL (TRANSMISSION)  
3. 130-5300 [1] CLIP  
4. 4P-7581 [1] CLIP (LADDER)  
5. 8T-4121 [3] WASHER-HARD (11X21X2.5-MM THK)  
6. 8T-4184 M [2] BOLT (M12X1.75X45-MM)  
7. 8T-4195 M [2] BOLT (M10X1.5X30-MM)  
8. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
9. 8T-5035 M [1] BOLT (M10X1.5X65-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP50590618
 

381-0657: FILTER & MTG GP-TRANSMISSION

381-0657 FILTER & MTG GP-TRANSMISSION
S/N ZBE673-UP
PART OF 396-3357 TRANSMISSION AR
i05377773 SEBP5059
3810657 FILTER & MTG GP-TRANSMISSION Parts scheme
  For full view, you need register

Parts for your 140M 2 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 289-2047 [1] PLATE AS  
2. 368-4921 Y [1] FILTER GP-OIL (TRANSMISSION)  
3. 130-5300 [1] CLIP  
4. 4P-7581 [1] CLIP (LADDER)  
5. 8T-4121 [3] WASHER-HARD (11X21X2.5-MM THK)  
6. 8T-4184 M [2] BOLT (M12X1.75X45-MM)  
7. 8T-4195 M [2] BOLT (M10X1.5X30-MM)  
8. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
9. 8T-5035 M [1] BOLT (M10X1.5X65-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP50590619
 

333-6433: FILTER GP-OIL

333-6433 FILTER GP-OIL
S/N R3D1-2758; ZBE1-672
WITH HOUSING, INTERNAL BYPASS
PART OF 250-8292 FILTER & MTG GP-TRANSMISSION
i03855116 SEBP5059
3336433 FILTER GP-OIL Parts scheme
  For full view, you need register

Parts for your 140M 2 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-0852 [1] CAP-DUST  
2. 8C-3447 [1] CAP-DUST  
3. 253-5327 [1] ELBOW  
4. 321-5967 [1] HOUSING GP-FILTER (POWER TRAIN)  
  3J-1907 [1] SEAL-O-RING  
  9S-8004 [1] PLUG (9/16-18-THD)  
5. 328-3655 [1] FILTER ELEMENT AS-OIL (ADVANCED EFFICIENCY, WITH SEAL)(TRANSMISSION)  
6. 333-9308 Y [1] BASE GP-OIL FILTER (POWER TRAIN)  
7. 214-7568 [3] SEAL-O-RING  
8. 3P-1932 [1] ADAPTER  
9. 6V-0484 [1] ELBOW  
10. 6V-3965 [1] FITTING (QUICK DISCONNECT)  
11. 6V-5048 [2] SEAL-O-RING  
12. 7W-7381 [1] FITTING-OUTLET  
13. 8C-3446 [1] VALVE-SAMPLING  
14. 8L-2786 [1] SEAL-O-RING  
   
  130-0229 F [1] SEAL-O-RING  
  F   NOT SHOWN
  Y   SEPARATE ILLUSTRATION
 

Information:

Operation and Maintenance Manual
Transmission and Differential Oil Sample - Obtain
120M Series 2, 12M Series 2, 140M Series 2 and 160M Series 2 Motor Graders
Transmission and Differential Oil Level - Check
120M Series 2, 12M Series 2, 140M Series 2 and 160M Series 2 Motor Graders
Transmission and Differential Oil - Change
120M Series 2, 12M Series 2, 140M Series 2 and 160M Series 2 Motor Graders
Technical Information Bulletin
Transmission Shaft Welds May Fail on Certain Motor Graders{3063, 3155, 3170}
Transmission Shaft Welds May Fail on Certain Motor Graders{3063, 3155, 3170}
Failure of Pressure Sensor Gp in Certain M Series and M Series 2 Motor Graders{3080, 7620}
Failure of Pressure Sensor Gp in Certain M Series and M Series 2 Motor Graders{3080, 7620}
Specifications
Temperature Sensor (Transmission Oil)
12M Series 2, 140M Series 2 and 160M Series 2 Motor Graders
Speed Sensor (Transmission) - Intermediate
12M Series 2, 140M Series 2 and 160M Series 2 Motor Graders
Speed Sensor (Transmission) - Input and Output
12M Series 2, 140M Series 2 and 160M Series 2 Motor Graders
Parking Brake
12M Series 2, 140M Series 2 and 160M Series 2 Motor Graders
Transmission Case
12M Series 2, 140M Series 2 and 160M Series 2 Motor Graders
Transmission
12M Series 2, 140M Series 2 and 160M Series 2 Motor Graders
Tool Operating Manual
425-0720 Lifting Fixture Assembly{0599, 0629, 0632, 3063, 3155}
425-0720 Lifting Fixture Assembly{0599, 0629, 0632, 3063, 3155}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
Systems Operation
Transmission Power Flow
12M Series 2, 140M Series 2 and 160M Series 2 Motor Graders Power Train
Power Train Hydraulic System
12M Series 2, 140M Series 2 and 160M Series 2 Motor Graders Power Train
Graphic Color Codes
12M Series 2, 140M Series 2 and 160M Series 2 Motor Graders Power Train
Reuse And Salvage Guidelines
Bench Test Procedure for a 14L, 120M, 120M Series 2, 12M, 12M Series 2, 12M Series 3, 140M, 140M Series 2, 140M Series 3, 160M, 160M Series 2, and 160M Series 3 Motor Grader Transmission {3030, 3073}
Bench Test Procedure for a 14L, 120M, 120M Series 2, 12M, 12M Series 2, 12M Series 3, 140M, 140M Series 2, 140M Series 3, 160M, 160M Series 2, and 160M Series 3 Motor Grader Transmission {3030, 3073}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission Clutch Plates and Disc Assemblies with Cellulose Friction Material {3030, 3155, 3190}
Transmission Clutch Plates and Disc Assemblies with Cellulose Friction Material {3030, 3155, 3190}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Transmission Reuse and Salvage Manual Contents {0374, 3030}
Transmission Reuse and Salvage Manual Contents {0374, 3030}
Procedure to Salvage Tang Slots on Transmission and Brake Pistons {0679, 3160, 4011, 4251}
Procedure to Salvage Tang Slots on Transmission and Brake Pistons {0679, 3160, 4011, 4251}
Repair of Transmission, Torque Converter, and Torque Divider Shafts {3000, 3063, 3100}
Repair of Transmission, Torque Converter, and Torque Divider Shafts {3000, 3063, 3100}
Reuse and Salvage of Transmission Components {3030}
Reuse and Salvage of Transmission Components {3030}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Procedures to Salvage Thrust Faces on Planetary Carriers {3160, 4050, 4051, 4093}
Procedures to Salvage Thrust Faces on Planetary Carriers {3160, 4050, 4051, 4093}
Thermal Spray Procedures for Clutch Housing Piston Bore {0679, 3160, 3169}
Thermal Spray Procedures for Clutch Housing Piston Bore {0679, 3160, 3169}
Thermal Spray Procedures for Clutch Piston Inside Diameter {0679, 3160, 3170}
Thermal Spray Procedures for Clutch Piston Inside Diameter {0679, 3160, 3170}
Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}
Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Contamination Control Guidelines
Filtration Procedure for Transmission Oil on Motor Graders Without Ecology Drain {0680, 0768, 3030}
Filtration Procedure for Transmission Oil on Motor Graders Without Ecology Drain {0680, 0768, 3030}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Testing and Adjusting
Transmission Pressures - Test and Adjust
12M Series 2, 140M Series 2 and 160M Series 2 Motor Graders Power Train
Parking Brake - Test
12M Series 2, 140M Series 2 and 160M Series 2 Motor Graders Power Train
Bench Test Procedures
Bench Test Procedure for a 14L, 120M, 120M Series 2, 12M, 12M Series 2, 12M Series 3, 140M, 140M Series 2, 140M Series 3, 160M, 160M Series 2, and 160M Series 3 Motor Grader Transmission {3030, 3073}
Bench Test Procedure for a 14L, 120M, 120M Series 2, 12M, 12M Series 2, 12M Series 3, 140M, 140M Series 2, 140M Series 3, 160M, 160M Series 2, and 160M Series 3 Motor Grader Transmission {3030, 3073}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Disassembly and Assembly
Transmission - Disassemble
12M Series 2, 140M Series 2 and 160M Series 2 Motor Graders Power Train
Transmission - Assemble
12M Series 2, 140M Series 2 and 160M Series 2 Motor Graders Power Train
Transmission - Remove
12M Series 2, 140M Series 2 and 160M Series 2 Motor Graders Power Train
Transmission - Install
12M Series 2, 140M Series 2 and 160M Series 2 Motor Graders Power Train
Transmission - Remove
12M Series 2, 140M Series 2 and 160M Series 2 Motor Graders Power Train
Service Magazine
Improved Registration Process for Retrofit Products {1000, 3000, 7000, 7570}
2011/02/17
Cat® Reman Announces the Addition of Transmission Clutch Plates for Certain Machine Transmissions {3160}
2014/09/11
Maximizing Transmission Shift Performance on Certain M, M2, and M3 Series Motor Graders {3030, 7000}
Maximizing Transmission Shift Performance on Certain M, M2, and M3 Series Motor Graders {3030, 7000}
New Clutch Pistons Now Available for 120-160 Series M, M2, M3, K, H, and 14 Series L Motor Graders {3030, 3063, 3155, 3170}
New Clutch Pistons Now Available for 120-160 Series M, M2, M3, K, H, and 14 Series L Motor Graders {3030, 3063, 3155, 3170}

Caterpillar Parts SIS Catalog 140M 2 :

COUPLING GP-TORSIONAL
359-0100 COUPLING GP-TORSIONAL
COOLER GP-TRANSMISSION OIL
350-5472 COOLER GP-TRANSMISSION OIL
COOLER GP-TRANSMISSION OIL
250-6726 COOLER GP-TRANSMISSION OIL
CONTROL GP-TRANSMISSION HYD
423-4655 CONTROL GP-TRANSMISSION HYD
CONTROL GP-TRANSMISSION HYD
331-5224 CONTROL GP-TRANSMISSION HYD
CONTROL GP-DIFFERENTIAL LOCK
356-2977 CONTROL GP-DIFFERENTIAL LOCK
CLUTCH GP-TRANSMISSION
364-8475 CLUTCH GP-TRANSMISSION
CLUTCH GP-TRANSMISSION
247-8303 CLUTCH GP-TRANSMISSION
DIFFERENTIAL & BEVEL GEAR GP
365-2124 DIFFERENTIAL & BEVEL GEAR GP
DIFFERENTIAL GP
287-8223 DIFFERENTIAL GP
DRIVE GP-FINAL
288-6508 DRIVE GP-FINAL
DRIVE GP-FINAL
288-6509 DRIVE GP-FINAL
FILLER GP-POWER TRAIN OIL
349-6137 FILLER GP-POWER TRAIN OIL
FILLER GP-POWER TRAIN OIL
349-6138 FILLER GP-POWER TRAIN OIL
FILTER & MTG GP-TRANSMISSION
250-8292 FILTER & MTG GP-TRANSMISSION
FILTER & MTG GP-TRANSMISSION
381-0657 FILTER & MTG GP-TRANSMISSION

Truck sale:

Caterpillar 140M2, Construction
176,000 
Caterpillar 140M2, Construction
- motor graders
HOLT CAT
Caterpillar 140M2, Construction
164,000 
Caterpillar 140M2, Construction
- motor graders
HOLT CAT
Caterpillar 140M2, Construction
139,800 
Caterpillar 140M2, Construction
- motor graders
FOLEY EQUIPMENT COMPANY
Caterpillar TRADE-IN 140M2, Construction
 
Caterpillar TRADE-IN 140M2, Construction
- motor graders
TRACTORS AND EQUIPMENT (I.T.E.) LTD.
Israel
Caterpillar 140M2, Construction
167,614 
Caterpillar 140M2, Construction
- motor graders
CAVPOWER
Australia
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.