AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

243-6660 CIRCLE GP S/N M9D1-UP PART OF 353-2919 COMMON AR Type 2 140M 2 MOTOR GRADER


IMPLEMENTS
CIRCLE GP
DRAWBAR GP
OPERATOR STATION
SEAT GP
AIR CONDITIONER GP

MOTOR GRADER 140M 2 MOTOR GRADER M9D
 140M Series 2 Motor Grader M9D00001-UP (MACHINE) POWERED BY C9.3 Engine SEBP5059 140M 2 M9D   (2010)

IMPLEMENTS

CIRCLE GP
CIRCLE GP
243-6660 CIRCLE GP
CIRCLE GP
243-6660 CIRCLE GP
 

#SEBP50590980
 

243-6660: CIRCLE GP

243-6660 CIRCLE GP
S/N M9D1-UP
PART OF 353-2919 COMMON AR
Type 2
i07638945 SEBP5059
2436660 CIRCLE GP Parts scheme
  For full view, you need register

Parts for your 140M 2 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 190-0627 B [6] SHIM (2-MM THK)  
2. 243-6650 [1] CIRCLE AS  
3. 243-6652 [4] COVER  
4. 446-1526 [2] STRIP-WEAR  
5. 276-1318 [2] STRIP-WEAR  
6. 276-1319 [2] STRIP-WEAR  
7. 558-2398 C [1] MOUNTING GP-BLADE  
8. 253-4645 [2] SHAFT  
9. 253-4646 [2] PLATE AS  
10. 265-6722 [4] COVER  
11. 095-1235 M [4] NUT-CASTLE (M42X4.5-THD)  
12. 095-0865 [4] PIN-COTTER  
13. 285-6124 [16] WASHER-HARD (16X35X5-MM THK)  
14. 285-6125 M [16] BOLT (M14X2-THD)  
15. 6V-7688 M [6] LOCKNUT (M20X2.5-THD)  
16. 7X-7740 [4] WASHER (45X78X8-MM THK)  
17. 129-2220 M [6] SETSCREW-SOCKET (M20X2.5X80-MM)  
18. 467-5183 [8] BUSHING  
19. 283-1578 [4] WASHER-HARD (22X45X10-MM THK)  
20. 466-1604 [2] SPACER  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP50590981
 

253-4630: DRAWBAR GP

253-4630 DRAWBAR GP
S/N M9D1-UP
PART OF 353-2919 COMMON AR
i02774600 SEBP5059
2534630 DRAWBAR GP Parts scheme
  For full view, you need register

Parts for your 140M 2 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1D-5119 [12] NUT (3/4-10-THD)  
2. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
3. 6G-5442 [1] BALL  
4. 6K-6444 [2] SPACER  
5. 7J-8782 [3] PLUG  
6. 333-0960 [6] STRIP-WEAR  
7. 201-8034 M [18] BOLT (M20X2.5X120-MM)  
8. 312-0780 [6] SHOE-CIRCLE GUIDE  
9. 253-4651 [1] DRAWBAR & YOKE AS  
9A. 178-3086 [3] STUD-BALL  
9B. 243-1786 [1] SHAFT AS  
9C. 243-6658 [1] PLATE  
9D. 243-6659 [1] PLATE  
9E. 285-4247 [1] PLATE  
9F. 285-4265 [1] PLATE  
9G. 178-7023 M [4] BOSS (M10X1.5X30-MM)  
9H. 7Y-6338 M [2] BOSS (M10X1.5X70-MM)  
9J. 8Y-3795 M [1] BOSS (M10X1.5X39-MM)  
9K. 9R-2672 M [7] BOSS-THREADED (M10X1.5X120-MM)  
9L. 9R-9866 M [2] BOSS-THREADED (M10X1.5-THD)  
10. 302-6338 [6] STRIP-WEAR  
11. 302-6337 B [6] SHIM (10-MM THK)  
12. 302-6335 B [12] SHIM (0.25-MM THK)  
  302-6336 B [42] SHIM (0.5-MM THK)  
14. 261-4672 [1] CAP (DRAWBAR)  
15. 261-4673 [1] ADAPTER  
16. 261-4674 B [4] SHIM (0.8-MM THK)  
  261-4675 B [6] SHIM (0.25-MM THK)  
  261-4676 B [1] SHIM (0.12-MM THK)  
19. 342-7352 [4] COVER  
20. 342-7353 [1] COVER  
21. 342-7351 [1] COVER  
22. 283-1578 [20] WASHER-HARD (22X45X10-MM THK)  
23. 288-3678 M [14] BOLT (M20X2.5X45-MM)  
24. 3E-5001 [2] PIN-SPRING  
25. 147-5112 M [4] BOLT (M24X3X150-MM)  
26. 550-3302 M [2] BOLT-HEAD (M20X2.5X80-MM)  
27. 8T-4167 [4] WASHER-HARD (26X44X4-MM THK)  
28. 8T-4123 [18] WASHER (22X35X3.5-MM THK)  
29. 483-0424 M [4] LOCKNUT (M20X2.5-THD)  
30. 287-5701 M [2] BOLT (M20X2.5X50-MM)  
31. 289-0580 [12] SETSCREW (3/4-10X2.5-IN)  
32. 5P-8291 [5] BOLT (3/4-16X2-IN)  
33. 6V-8653 M [2] BOLT-SOCKET HEAD (M6X1X40-MM)  
   
  302-6335 BFJ [24] SHIM (0.25-MM THK)  
  302-6336 BFJ [60] SHIM (0.5-MM THK)  
  B   USE AS REQUIRED
  F   NOT SHOWN
  J   LOCATED IN THE TOOLBOX
  M   METRIC PART
 

#SEBP50590982
 

173-1028: ADJUSTER GP-SEAT

173-1028 ADJUSTER GP-SEAT
S/N M9D1-UP
SLIDE
PART OF 244-5002 SEAT GP
AN ATTACHMENT
i01582195 SEBP5059
1731028 ADJUSTER GP-SEAT Parts scheme
  For full view, you need register

Parts for your 140M 2 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4V-8256 [4] SPRING  
2. 117-4492 [1] ROD  
3. 136-1544 [1] LATCH AS (LH)  
4. 156-5545 [1] LATCH AS (RH)  
5. 164-4531 [1] ROD  
6. 170-1112 [1] PLATE AS  
7. 170-1114 [1] HANDLE (SLIDE ADJUSTMENT)  
8. 170-1115 [1] HANDLE (TILT ADJUSTMENT)  
9. 132-0338 [2] WASHER-PLASTIC (13X31.7X0.8-MM THK)  
10. 2K-4973 [2] LOCKNUT (3/8-16-THD)  
11. 7X-0608 [2] WASHER-HARD (10.2X16X2-MM THK)  
 

#SEBP50590983
 

237-3970: AIR COMPRESSOR GP-SEAT

237-3970 AIR COMPRESSOR GP-SEAT -HEAVY-DUTY
S/N M9D1-UP
FOR OPTIONAL FIELD REPLACEMENT ORDER 211-5358 CONDUIT (100-CM), 5P-6010 TUBE (1-M)
PART OF 256-8768 SUSPENSION GP-SEAT
AN ATTACHMENT
i02784170 SEBP5059
2373970 AIR COMPRESSOR GP-SEAT Parts scheme
  For full view, you need register

Parts for your 140M 2 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
    (NO SERVICED PARTS)
 

#SEBP50590984
 

244-2722: AIR CONDITIONER & MOUNTING GP

244-2722 AIR CONDITIONER & MOUNTING GP
S/N M9D1-UP
PART OF 233-3149, 361-3133 AIR CONDITIONER GP
ALSO AN ATTACHMENT
i02786358 SEBP5059
2442722 AIR CONDITIONER & MOUNTING GP Parts scheme
  For full view, you need register

Parts for your 140M 2 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 249-0410 [2] GASKET  
2. 249-0411 [1] GASKET  
3. 249-0937 [1] DUCT  
4. 265-7454 [1] GASKET  
5. 266-3753 [2] SPACER (11X25X39.8-MM)  
6. 285-8055 Y [1] AIR CONDITIONER GP  
7. 118-5619 [2] SCREW-FLAT HEAD (6-20X1-IN)  
8. 145-6669 [2] SCREW-SELF-TAPPING (10X0.75-IN)  
9. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
10. 8T-4172 M [2] BOLT (M10X1.5X80-MM)  
11. 8T-4196 M [2] BOLT (M10X1.5X35-MM)  
12. 5P-5637 D SEAL (0.5-M)  
13. 5P-5927 D SEAL (0.4-M)  
13A. 5P-5927 D SEAL (0.3-M EACH)  
13B. 5P-5927 D SEAL (0.5-M)  
14. 5P-5643 D SEAL (0.5-M)  
  D   ORDER BY THE METER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP50590985
 

387-8752: AIR CONDITIONER & MOUNTING GP

387-8752 AIR CONDITIONER & MOUNTING GP
S/N M9D1-UP
PART OF 361-3133 AIR CONDITIONER GP
AN ATTACHMENT
i04859467 SEBP5059
3878752 AIR CONDITIONER & MOUNTING GP Parts scheme
  For full view, you need register

Parts for your 140M 2 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 249-0410 [2] GASKET  
2. 249-0411 [1] GASKET  
3. 249-0937 [1] DUCT  
4. 265-7454 [1] GASKET  
5. 285-8055 Y [1] AIR CONDITIONER GP  
6. 387-8731 [2] SPACER  
7. 118-5619 [2] SCREW-FLAT HEAD (6-20X1-IN)  
8. 145-6669 [2] SCREW-SELF-TAPPING (10X0.75-IN)  
9. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
10. 8T-4172 M [2] BOLT (M10X1.5X80-MM)  
11. 8T-4196 M [2] BOLT (M10X1.5X35-MM)  
12. 5P-5637 D SEAL (0.5-M)  
13. 5P-5643 D SEAL (0.5-M)  
14. 5P-5927 D SEAL (1.3-M)  
  D   ORDER BY THE METER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP50590986
 

310-0765: AIR CONDITIONER AR

310-0765 AIR CONDITIONER AR -HVAC
S/N M9D1-UP
PART OF 353-2919 COMMON AR
FOR USAGE REFER TO CHART @@@@@325-2761@@@@@
ALSO AN ATTACHMENT
i05021629 SEBP5059
  For full view, you need register

Parts for your 140M 2 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  233-3149 Y [1] AIR CONDITIONER GP  
  324-5382 Y [1] COMPRESSOR GP-REFRIGERANT  
  324-5385 Y [1] CONDENSER GP-REFRIGERANT  
  305-2943 Y [1] LINES GP-AIR CONDITIONER  
  305-2942 Y [1] LINES GP-HEATER  
  Y   SEPARATE ILLUSTRATION
 

#SEBP50590987
 

233-3149: AIR CONDITIONER GP

233-3149 AIR CONDITIONER GP
S/N M9D1-UP
PART OF 310-0765 AIR CONDITIONER AR, 357-9091 CAB AR, 355-8802, 355-8804 OPTION AR-CAB
ALSO AN ATTACHMENT
i04096292 SEBP5059
2333149 AIR CONDITIONER GP Parts scheme
  For full view, you need register

Parts for your 140M 2 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 300-4231 Y [1] CONTROL GP-AIR & TEMPERATURE (AIR CONDITIONER)  
2. 244-2701 Y [1] DUCT & FILTER GP-CAB AIR  
3. 244-2702 Y [1] LINES GP-AIR CONDITIONER  
4. 244-2722 Y [1] AIR CONDITIONER & MOUNTING GP  
5. 250-2933 Y [1] LINES GP-HEATER (CAB)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP50590988
 

285-8055: AIR CONDITIONER GP

285-8055 AIR CONDITIONER GP
S/N M9D1-UP
PART OF 244-2722, 387-8752 AIR CONDITIONER & MOUNTING GP
ALSO AN ATTACHMENT
i03747432 SEBP5059
2858055 AIR CONDITIONER GP Parts scheme
  For full view, you need register

Parts for your 140M 2 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 119-9631 [1] SWITCH-TEMPERATURE (AIR CONDITIONER)  
2. 3S-2093 [2] STRAP-CABLE  
3. 6T-6708 [2] WASHER (7X28.6X4.1-MM THK)  
4. 125-9740 [1] RESISTOR  
5. 133-9012 C [2] FUSE (15-AMPERE)(AIR CONDITIONER, HEATER)  
6. 249-0934 [1] CASE AS  
7. 249-0938 [1] CASE  
8. 263-9466 [1] PLATE  
9. 265-7434 [1] SEAL  
10. 265-7435 [1] GASKET  
11. 273-0342 [1] FILM-IDENTIFICATION (SERIAL NUMBER)  
12. 276-9015 [1] HARNESS AS-MOTOR (HVAC)  
  7T-0093 [2] PIN-CONNECTOR (12-GA TO 14-GA)  
  8T-8729 [4] PIN-CONNECTOR (16-GA TO 18-GA)  
  8T-8737 [1] PLUG-SEAL  
  9W-0852 [3] PIN-CONNECTOR (14-GA TO 16-GA)  
  100-6674 [3] SEAL-CONNECTOR  
  118-5125 [1] CLIP  
  119-3662 E TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM)  
  125-7875 E TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM)  
  5P-5618 [3] TERMINAL-BLADE (10-GA TO 12-GA)  
  5P-4571 [5] TERMINAL-BLADE (14-GA TO 16-GA)  
  2L-8067 [2] TERMINAL-RING (10-GA TO 12-GA, 1/4-IN SCREW)  
  102-8806 [1] KIT-RECEPTACLE (8-PIN)  
  177-9645 [1] KIT-RECEPTACLE (2-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  3E-3389 [1] WEDGE-RECEPTACLE LOCK (8-PIN)  
14. 278-3354 [1] FILM-INSTRUCTION (HVAC WATER, DRAINING, FILLING)  
15. 279-1124 [1] GROMMET  
16. 322-6674 C [1] PLATE  
17. 322-6675 C [1] PLATE AS  
18. 466-7341 C [1] FAN AS (24-VOLT, A/C, HEATER)(9-BLADE)  
  1F-7958 [1] NUT-FULL (1/2-13-THD)  
19. 328-8755 C [1] WIRE AS  
20. 129-3178 CM [1] LOCKNUT (M6X1-THD)  
21. 132-5793 C [2] SCREW-WASHER HEAD (4-40X0.25-IN)  
22. 7X-0490 M [1] BOLT (M6X1X200-MM)  
23. 6V-1668 [2] WASHER (6.5X29.1X3-MM THK)  
24. 6V-6717 [2] SCREW-WASHER HEAD (8-32X9.52-MM)  
25. 8T-4205 C [10] WASHER-HARD (7.2X14.5X2-MM THK)  
26. 9X-2038 [4] WASHER (7X19X2-MM THK)  
27. 9X-2044 CM [14] SCREW-TRUSS HEAD (M6X1X16-MM)  
28. 6D-5801 [3] LOCKNUT (8-32-THD)  
29. 238-8839 [1] CORE AS-HEATER  
30. 238-8840 [1] COIL AS-EVAPORATOR  
31. 245-1596 [1] ACTUATOR (WATER VALVE)  
32. 281-2588 [6] SCREW-SELF-TAPPING  
33. 450-4968 [2] SCREW-HEX HEAD (8-16X0.5-IN)  
34. 465-7612 [1] CLIP  
35. 470-3946 [1] SEAL-O-RING  
36. 521-2576 [1] VALVE AS-CONTROL (AIR CONDITIONER)  
  262-4930 [1] TUBE AS  
  465-7612 [1] CLIP  
  470-3946 [1] SEAL-O-RING  
37. 521-3096 [1] PLATE AS  
38. 525-2467 [3] SPACER (4.34X9.53X15.9-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP50590989
 

361-3133: AIR CONDITIONER GP

361-3133 AIR CONDITIONER GP
S/N M9D1-UP
PART OF 379-3676, 381-3760, 381-3761 CAB AR
AN ATTACHMENT
i04859101 SEBP5059
  For full view, you need register

Parts for your 140M 2 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  244-2722 Y [1] AIR CONDITIONER & MOUNTING GP  
    -OR-
  387-8752 Y [1] AIR CONDITIONER & MOUNTING GP  
  300-4231 Y [1] CONTROL GP-AIR & TEMPERATURE  
  244-2701 Y [1] DUCT & FILTER GP-CAB AIR  
  361-3134 Y [1] LINES GP-AIR CONDITIONER  
  250-2933 Y [1] LINES GP-HEATER (CAB)  
  Y   SEPARATE ILLUSTRATION
 

Information:

Operation and Maintenance Manual
Circle Top - Lubricate
120M Series 2, 12M Series 2, 140M Series 2 and 160M Series 2 Motor Graders
Circle Clearances - Check/Adjust
120M Series 2, 12M Series 2, 140M Series 2 and 160M Series 2 Motor Graders
Special Instruction
Installation of Circle Repair Segments For Certain Motor Graders {6152, 6152}
Installation of Circle Repair Segments For Certain Motor Graders {6152, 6152}
Specifications
Circle
12M Series 2, 140M Series 2 and 160M Series 2 Motor Graders Machine Systems
Disassembly and Assembly
Drawbar - Remove
12M Series 2, 140M Series 2 and 160M Series 2 Motor Graders Machine Systems
Drawbar - Install
12M Series 2, 140M Series 2 and 160M Series 2 Motor Graders Machine Systems
Circle - Remove
12M Series 2, 140M Series 2 and 160M Series 2 Motor Graders Machine Systems
Circle - Install
12M Series 2, 140M Series 2 and 160M Series 2 Motor Graders Machine Systems
Service Magazine
Circle Tooth Profile and the Correct Use of Templates for the Installation of Circle Segments For Certain Motor Graders {6152, 6152}
2012/03/20
Maintaining the Proper Circle Drive Pinion Adjustment and Proper Lubrication Maximizes the Pinion Service Life on Motor Graders {0645, 5207, 6152, 6154, 6155}
Maintaining the Proper Circle Drive Pinion Adjustment and Proper Lubrication Maximizes the Pinion Service Life on Motor Graders {0645, 5207, 6152, 6154, 6155}
A New Moldboard Mounting Bracket is Now Available On Certain M Series Motor Graders {6151, 6152, 6154, 6155}
A New Moldboard Mounting Bracket is Now Available On Certain M Series Motor Graders {6151, 6152, 6154, 6155}
Improved Blade Mounting Group Is Now Used on Certain Motor Graders {6152, 6154}
2015/06/19
A Procedure To Install a Lubrication Group for the Circle Drive Pinion On Certain Motor Graders Is Available {6154, 7510}
A Procedure To Install a Lubrication Group for the Circle Drive Pinion On Certain Motor Graders Is Available {6154, 7510}

Caterpillar Parts SIS Catalog 140M 2 :

CIRCLE GP
243-6660 CIRCLE GP
VALVE GP-SOLENOID
348-7946 VALVE GP-SOLENOID
VALVE GP-SOLENOID
278-1799 VALVE GP-SOLENOID
VALVE GP-SOLENOID
251-3268 VALVE GP-SOLENOID
VALVE GP-SOLENOID
189-8627 VALVE GP-SOLENOID
VALVE GP-RELIEF
133-5330 VALVE GP-RELIEF
VALVE GP-PUMP CONTROL
347-0612 VALVE GP-PUMP CONTROL
VALVE GP-PRESSURE REDUCING
252-8038 VALVE GP-PRESSURE REDUCING
DRAWBAR GP
253-4630 DRAWBAR GP
ADJUSTER GP-SEAT
173-1028 ADJUSTER GP-SEAT
AIR COMPRESSOR GP-SEAT
237-3970 AIR COMPRESSOR GP-SEAT
AIR CONDITIONER & MOUNTING GP
244-2722 AIR CONDITIONER & MOUNTING GP
AIR CONDITIONER & MOUNTING GP
387-8752 AIR CONDITIONER & MOUNTING GP
310-0765 AIR CONDITIONER AR
AIR CONDITIONER GP
233-3149 AIR CONDITIONER GP
AIR CONDITIONER GP
285-8055 AIR CONDITIONER GP

Truck sale:

Caterpillar 140M2, Construction
176,000 
Caterpillar 140M2, Construction
- motor graders
HOLT CAT
Caterpillar 140M2, Construction
164,000 
Caterpillar 140M2, Construction
- motor graders
HOLT CAT
Caterpillar 140M2, Construction
139,800 
Caterpillar 140M2, Construction
- motor graders
FOLEY EQUIPMENT COMPANY
Caterpillar TRADE-IN 140M2, Construction
 
Caterpillar TRADE-IN 140M2, Construction
- motor graders
TRACTORS AND EQUIPMENT (I.T.E.) LTD.
Israel
Caterpillar 140M2, Construction
167,614 
Caterpillar 140M2, Construction
- motor graders
CAVPOWER
Australia
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.