364-3747 GRADE CONTROL AR -CROSS SLOPE S/N M9J1-UP CANNOT BE USED WITH @@@@@362-5222@@@@@, @@@@@362-6013@@@@@ AN ATTACHMENT 140M 2

Part No	Qty	Parts name
360-7617 Y	[1]	GRADE CONTROL GP
362-5223 Y	[1]	SWIVEL GP (CIRCLE DRIVE)
356-3647 Y	[1]	WIRING GP-GRADE CONTROL (ACCUGRADE)
363-4325 Y	[1]	WIRING GP-SENSOR

371-6464	[2]	FILM-IDENTIFICATION (GRADE CONTROL)
		(ON ENCLOSURE GP)

363-7275 J	[1]	CONFIGURATION-PREMIUM
J		DLR INSTALL CONFIG:SEE IRM:EES03-01
Y		SEPARATE ILLUSTRATION

#SEBP50600391

360-7617: GRADE CONTROL GP

GRADE CONTROL GP

360-7617 GRADE CONTROL GP -ACCUGRADE
S/N M9J1-UP
PART OF 322-3121, 362-6013, 364-3747 GRADE CONTROL AR
AN ATTACHMENT

i04588669 SEBP5060

For full view, you need register

Parts for your 140M 2 MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	283-7960 Y	[1]	POWER SUPPLY GP (GRADE CONTROL)
2.	314-3323 Y	[1]	PANEL GP-CONTROL (ACCUGRADE)(LH)
3.	360-2968	[1]	HARNESS AS-WIRING (POWER MODULE, RH)
	3R-9965	[1]	PLUG AS-CONNECTOR (8-PIN)
	8T-8737	[6]	PLUG-SEAL
	126-1767	[6]	PIN-CONNECTOR (14-GA TO 16-GA)
	230-4010	[1]	RECEPTACLE AS-CONNECTOR (12-PIN)
4.	360-2969	[1]	HARNESS AS-WIRING (POWER MODULE, LH)
	6D-5257	[1]	PLUG AS-CONNECTOR (8-PIN)
	8T-8737	[4]	PLUG-SEAL
	126-1768	[8]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	230-4009	[1]	PLUG AS-CONNECTOR (12-PIN)
	264-7034	[1]	SEAL-CONNECTOR
5.	360-8162 Y	[1]	PANEL GP-CONTROL (ACCUGRADE)(RH)
6.	4P-8134	[2]	CLIP (LADDER)
7.	3S-2093	[5]	STRAP-CABLE
	Y		SEPARATE ILLUSTRATION

#SEBP50600392

458-7884: HARNESS AS-CAB

HARNESS AS-CAB

458-7884 HARNESS AS-CAB -MAIN CAB
S/N M9J1-UP
PART OF 372-6061 WIRING GP-CAB
AN ATTACHMENT

i06032736 SEBP5060

For full view, you need register

Parts for your 140M 2 MOTOR GRADER:

CATERPILLAR SIS

Part No	Qty	Parts name
3E-5226	[4]	SOCKET-CONNECTOR (12-GA TO 14-GA)
3S-2093	[12]	STRAP-CABLE
7G-7917	[10]	PLUG-SEAL
7G-7919	[3]	PLUG-SEAL
7R-2751	[142]	PLUG-CONNECTOR (1-PIN)
7T-0093	[2]	PIN-CONNECTOR (12-GA TO 14-GA)
8N-1517	[1]	RECEPTACLE AS-CONNECTOR (25-PIN)
8N-1523	[1]	LOCKWASHER
8N-1540	[4]	PIN-CONNECTOR (12-GA TO 14-GA)
8N-1548	[2]	PIN-CONNECTOR (4-GA)
8T-8737	[245]	PLUG-SEAL
9X-6856	[15]	PIN-CONNECTOR (16-GA TO 18-GA)
196-2412	[62]	TERMINAL AS (16-GA)
		(EACH INCLUDES)
7R-2750	[1]	SEAL-CONNECTOR
112-9611	[4]	TERMINAL-BLADE (18-GA TO 20-GA)
125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(665-CM)
125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(30-CM)
9X-3402	[396]	SOCKET-CONNECTOR (16-GA TO 18-GA)
		-OR-
126-1768	[396]	SOCKET-CONNECTOR (14-GA TO 16-GA)
126-1774	[4]	COVER-CONNECTOR
128-4123	[3]	SEAL-CABLE
128-4249	[1]	LOCKWASHER
128-5016	[114]	SEAL-CABLE
5P-5618	[1]	TERMINAL-BLADE (10-GA TO 12-GA)
5P-4571	[3]	TERMINAL-BLADE (14-GA TO 16-GA)
2L-8052	[3]	TERMINAL-RING (6-GA, 3/8-IN SCREW)
		-OR-
2L-8060	[3]	TERMINAL-RING (8-GA, 3/8-IN SCREW)
2L-8069	[5]	TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW)
2L-8079	[9]	TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW)
134-2540	[3]	RECEPTACLE AS-CONNECTOR (3-PIN)
9X-3401	[283]	PIN-CONNECTOR (16-GA TO 18-GA)
		-OR-
126-1767	[283]	PIN-CONNECTOR (14-GA TO 16-GA)
151-9274	[1]	KIT-RECEPTACLE (4-PIN)
151-9272	[1]	KIT-RECEPTACLE (2-PIN)
177-9645	[1]	KIT-RECEPTACLE (2-PIN)
174-3091	[2]	KIT-RECEPTACLE (12-PIN)
		(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
5P-2957	[2]	TERMINAL-BLADE (14-GA TO 16-GA)
		-OR-
5P-5602	[2]	TERMINAL-BLADE (18-GA TO 22-GA)
171-0596	[1]	RECEPTACLE AS-CONNECTOR (3-PIN)
196-2413	[56]	TERMINAL AS (12-GA)
		(EACH INCLUDES)
128-4123	[1]	SEAL-CABLE
175-3366	[2]	RECEPTACLE AS
177-9648	[2]	KIT-CONNECTING PLUG (2-PIN)
176-2947	[7]	KIT-CONNECTING PLUG (4-PIN)
		(EACH PLUG KIT INCLUDES PLUG AS & WEDGE)
185-1860	[44]	SEAL-WIRE
189-3158	[1]	SUPPRESSOR-ARC
197-7259	[1]	RECEPTACLE AS-CONNECTOR (19-PIN)
202-5397	[16]	PLUG
203-9007	[3]	NUT (1-1/2-18-THD)
204-1297	[41]	TERMINAL AS-BLADE (18-GA TO 20-GA)
		(EACH INCLUDES)
235-4123	[1]	TERMINAL (18-GA TO 20-GA)
211-0052	[2]	NUT (1-11/16-18-THD)
245-7434	[6]	KIT-CONNECTING PLUG (10-PIN)
		(EACH INCLUDES PLUG CONNECTOR, WIRE ASSEMBLIES & PLUGS)
245-8021	[1]	PLUG AS (24-PIN)
261-0524	[1]	PLUG AS-CONNECTOR (4-PIN)
455-0706	[1]	SEAL-CONNECTOR
270-2679	[3]	LOCKWASHER
271-5590	[2]	PLUG AS-CONNECTOR (2-PIN)
283-8106	[4]	SOCKET-CONNECTOR (20-GA)
		-OR-
374-8372	[4]	SOCKET-CONNECTOR (16-GA TO 18-GA)
281-3395	[1]	PLUG AS-CONNECTOR (12-PIN)
455-0709	[1]	SEAL-CONNECTOR
283-6447	[2]	TERMINAL-RING
338-8860	[2]	PLUG AS-CONNECTOR (70-PIN)
309-6831	[2]	PLUG AS-CONNECTOR (70-PIN)
		(EACH PLUG AS INCLUDES)
159-9322	[1]	SEAL-O-RING
309-9886	[2]	BLOCK AS-FUSE
310-0674	[1]	LOCKWASHER
325-9568	[1]	RECEPTACLE-CONNECTOR (9-PIN)
329-3734 B		TAPE-ELECTRICAL
331-3575	[1]	RECEPTACLE AS-CONNECTOR (70-PIN)
331-4222	[2]	KIT-CONNECTING PLUG (12-PIN)
331-4223	[1]	KIT-CONNECTING PLUG (12-PIN)
331-4224	[10]	KIT-CONNECTING PLUG (6-PIN)
331-4226	[8]	KIT-CONNECTING PLUG (2-PIN)
		(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
331-3600	[1]	RECEPTACLE AS-CONNECTOR (24-PIN)
374-7463	[2]	CAP-SEAL
374-7465	[2]	CAP-SEAL
374-7466	[5]	CAP-SEAL
374-7467	[5]	CAP-SEAL
374-7468	[1]	CAP-SEAL
455-7867	[2]	CAP AS
		(EACH INCLUDES)
8C-6354	[1]	CAP-RECEPTACLE (ET CONNECTOR)
B		USE AS REQUIRED
E		ORDER BY THE CENTIMETER

#SEBP50600393

524-2229: HARNESS AS-CAB

HARNESS AS-CAB

524-2229 HARNESS AS-CAB -HVAC
S/N M9J1-UP
JUMPER
PART OF 372-6061 WIRING GP-CAB
AN ATTACHMENT

i07189823 SEBP5060

For full view, you need register

Parts for your 140M 2 MOTOR GRADER:

CATERPILLAR SIS

Part No	Qty	Parts name
102-8801	[1]	KIT-RECEPTACLE (12-PIN)
		(INCLUDES RECEPTACLE AS & WEDGE)
9X-3401	[12]	PIN-CONNECTOR (16-GA TO 18-GA)
		-OR-
126-1767	[12]	PIN-CONNECTOR (14-GA TO 16-GA)
119-5094	[1]	PLUG AS
231-3930	[1]	RELAY AS (24-VOLT)(HVAC)
9X-3402	[12]	SOCKET-CONNECTOR (16-GA TO 18-GA)
		-OR-
126-1768	[12]	SOCKET-CONNECTOR (14-GA TO 16-GA)
9X-1056	[4]	TERMINAL-RECEPTACLE (14-GA TO 16-GA)
119-3662 E		TUBE-HEAT SHRINK (10.85-MM DIA)(13-CM)
155-2258	[1]	WEDGE-PLUG LOCK (12-PIN)
E		ORDER BY THE CENTIMETER

#SEBP50600394

356-3649: HARNESS AS-CHASSIS

HARNESS AS-CHASSIS

356-3649 HARNESS AS-CHASSIS
S/N M9J1-UP
PART OF 356-3647 WIRING GP-GRADE CONTROL
AN ATTACHMENT

i07022127 SEBP5060

For full view, you need register

Parts for your 140M 2 MOTOR GRADER:

CATERPILLAR SIS

Part No	Qty	Parts name
7R-3029	[4]	CAP-DUST
243-5362	[1]	CAP-DUST
228-3323	[4]	CLIP-SPRING
155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
		(INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
174-0503	[1]	KIT-CONNECTING PLUG (3-PIN)
		(INCLUDES PLUG AS, WEDGES & INTERFACE SEAL)
102-8804	[1]	KIT-RECEPTACLE (4-PIN)
		(INCLUDES RECEPTACLE AS & WEDGE)
9W-0852	[2]	PIN-CONNECTOR (14-GA TO 16-GA)
9X-3401	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
230-2566	[4]	RECEPTACLE-CONNECTOR
9X-4385	[1]	PLUG AS-CONNECTOR (6-PIN)
8T-8737	[3]	PLUG-SEAL
134-2540	[1]	RECEPTACLE AS-CONNECTOR (3-PIN)
9W-0844	[4]	SOCKET-CONNECTOR (14-GA TO 16-GA)
9X-3402	[8]	SOCKET-CONNECTOR (16-GA TO 18-GA)
119-3662 E		TUBE-HEAT SHRINK (10.85-MM DIA)(39-CM)
125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(115-CM)
155-2258	[1]	WEDGE-PLUG LOCK (12-PIN)
3E-3377	[1]	WEDGE-RECEPTACLE LOCK (4-PIN)
E		ORDER BY THE CENTIMETER

#SEBP50600395

443-6973: HARNESS AS-CONTROL

HARNESS AS-CONTROL

443-6973 HARNESS AS-CONTROL
S/N MME503-UP
PART OF 443-6974 HARNESS AS-ENGINE

i05401047 SEBP5060

For full view, you need register

Parts for your 140M 2 MOTOR GRADER:

CATERPILLAR SIS

Part No	Qty	Parts name
3E-6446	[1]	CAP AS-CONNECTOR
110-6844	[1]	SEAL
9X-3401	[39]	PIN-CONNECTOR (16-GA TO 18-GA)
		-OR-
126-1767	[39]	PIN-CONNECTOR (14-GA TO 16-GA)
100-3320	[1]	PLUG AS-CONNECTOR (2-PIN)
111-2416	[1]	PLUG AS-CONNECTOR (2-PIN)
		(EACH PLUG AS INCLUDES)
126-5011	[1]	SEAL-CONNECTOR
155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
		(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
230-4009	[1]	PLUG AS-CONNECTOR (12-PIN)
264-7034	[1]	SEAL-CONNECTOR
230-4011	[3]	PLUG AS-CONNECTOR (2-PIN)
238-8245	[2]	PLUG AS-CONNECTOR (2-PIN)
281-8801	[1]	PLUG AS-CONNECTOR (2-PIN)
238-8247	[1]	PLUG AS-CONNECTOR (2-PIN)
		(EACH PLUG AS INCLUDES)
264-7029	[1]	SEAL-CONNECTOR
230-4013	[2]	PLUG AS-CONNECTOR (3-PIN)
237-0227	[1]	PLUG AS-CONNECTOR (3-PIN)
281-8803	[1]	PLUG AS-CONNECTOR (3-PIN)
281-8804	[2]	PLUG AS-CONNECTOR (3-PIN)
		(EACH PLUG AS INCLUDES)
264-7030	[1]	SEAL-CONNECTOR
264-5732	[1]	PLUG AS-CONNECTOR (120-PIN)
288-7324	[1]	SEAL-CONNECTOR
160-8124	[1]	PLUG AS (2-PIN)
102-8802	[1]	KIT-RECEPTACLE (2-PIN)
		(INCLUDES RECEPTACLE AS & WEDGE)
8T-8737	[2]	PLUG-SEAL
8T-8737	[59]	PLUG-SEAL
102-8805	[1]	KIT-RECEPTACLE (6-PIN)
		(INCLUDES RECEPTACLE AS & WEDGE)
134-2540	[1]	RECEPTACLE AS-CONNECTOR (3-PIN)
324-6267	[1]	RECEPTACLE AS-CONNECTOR (40-PIN)
289-5150 E		SLEEVE (48-CM)
9X-3402	[123]	SOCKET-CONNECTOR (16-GA TO 18-GA)
		-OR-
126-1768	[123]	SOCKET-CONNECTOR (14-GA TO 16-GA)
305-5362	[4]	TERMINAL AS (18-GA)
1S-9593	[8]	STRAP-CABLE
3S-2093	[1]	STRAP-CABLE
1P-0810 B		TAPE-ELECTRICAL
329-3734 B		TAPE-ELECTRICAL
125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(65-CM)
125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM)
B		USE AS REQUIRED
E		ORDER BY THE CENTIMETER

#SEBP50600396

546-2154: HARNESS AS-CONTROL

HARNESS AS-CONTROL

546-2154 HARNESS AS-CONTROL
S/N TXD1-UP
PART OF 418-4716 WIRING GP-ENGINE
AN ATTACHMENT

i07367951 SEBP5060

For full view, you need register

Parts for your 140M 2 MOTOR GRADER:

CATERPILLAR SIS

Part No	Qty	Parts name
9X-3401	[12]	PIN-CONNECTOR (16-GA TO 18-GA)
		-OR-
126-1767	[12]	PIN-CONNECTOR (14-GA TO 16-GA)
191-7823	[1]	RECEPTACLE AS
307-8428	[1]	GASKET
125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(60-CM)
172-6064	[1]	WEDGE-RECEPTACLE LOCK
E		ORDER BY THE CENTIMETER

#SEBP50600397

215-3249: HARNESS AS-ENGINE

HARNESS AS-ENGINE

215-3249 HARNESS AS-ENGINE
S/N TXD1-UP
PART OF 418-4716 WIRING GP-ENGINE
AN ATTACHMENT

i05201172 SEBP5060

For full view, you need register

Parts for your 140M 2 MOTOR GRADER:

CATERPILLAR SIS

Part No	Qty	Parts name
105-1797	[5]	MOUNT
9X-3401	[12]	PIN-CONNECTOR (16-GA TO 18-GA)
		-OR-
126-1767	[12]	PIN-CONNECTOR (14-GA TO 16-GA)
191-7823	[1]	RECEPTACLE AS
307-8428	[1]	GASKET
3S-2093	[5]	STRAP-CABLE

#SEBP50600398

323-9140: HARNESS AS-ENGINE

HARNESS AS-ENGINE

323-9140 HARNESS AS-ENGINE
S/N TXD1-UP
PART OF 418-4716 WIRING GP-ENGINE
AN ATTACHMENT

i04927085 SEBP5060

For full view, you need register

Parts for your 140M 2 MOTOR GRADER:

CATERPILLAR SIS

Part No	Qty	Parts name
211-6807	[1]	COVER-CONNECTOR
111-2416	[1]	PLUG AS-CONNECTOR (2-PIN)
100-3320	[1]	PLUG AS-CONNECTOR (2-PIN)
		(EACH PLUG AS-CONNECTOR INCLUDES)
126-5011	[1]	SEAL-CONNECTOR
155-2265	[1]	KIT-CONNECTING PLUG (8-PIN)
155-2270	[3]	KIT-CONNECTING PLUG (2-PIN)
		(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
172-6062	[1]	PLUG AS-CONNECTOR (18-PIN)
230-4011	[2]	PLUG AS-CONNECTOR (2-PIN)
		(EACH INCLUDES)
264-7029	[1]	SEAL-CONNECTOR
237-0227	[3]	PLUG AS-CONNECTOR (3-PIN)
230-4013	[1]	PLUG AS-CONNECTOR (3-PIN)
		(EACH PLUG AS INCLUDES)
264-7030	[1]	SEAL-CONNECTOR
264-5732	[1]	PLUG AS-CONNECTOR (120-PIN)
288-7324	[1]	SEAL-CONNECTOR
160-8124	[1]	PLUG AS (2-PIN)
8T-8737	[2]	PLUG-SEAL
8T-8737	[93]	PLUG-SEAL
317-1204 E		SLEEVE (8-CM)
289-5150 E		SLEEVE (112-CM)
289-5151 E		SLEEVE (12-CM)
9X-3402	[75]	SOCKET-CONNECTOR (16-GA TO 18-GA)
		-OR-
126-1768	[75]	SOCKET-CONNECTOR (14-GA TO 16-GA)
305-5362	[4]	TERMINAL AS (18-GA)
1S-9593	[2]	STRAP-CABLE
125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(40-CM)
E		ORDER BY THE CENTIMETER

#SEBP50600399

399-4015: HARNESS AS-ENGINE

HARNESS AS-ENGINE

399-4015 HARNESS AS-ENGINE
S/N MME1-UP
PART OF 399-4012 WIRING GP-UNIT INJECTOR

i05027389 SEBP5060

For full view, you need register

Parts for your 140M 2 MOTOR GRADER:

CATERPILLAR SIS

Part No	Qty	Parts name
155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
		(INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
102-8805	[1]	KIT-RECEPTACLE (6-PIN)
		(INCLUDES RECEPTACLE AS & WEDGE)
9X-3401	[4]	PIN-CONNECTOR (16-GA TO 18-GA)
		-OR-
126-1767	[4]	PIN-CONNECTOR (14-GA TO 16-GA)
8T-8737	[2]	PLUG-SEAL
9G-3695	[2]	PLUG-SEAL
9X-3402	[6]	SOCKET-CONNECTOR (16-GA TO 18-GA)
		-OR-
126-1768	[6]	SOCKET-CONNECTOR (14-GA TO 16-GA)
125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(50-CM)
6N-7523	[1]	WASHER (6.48X11.9X1.57-MM THK)
329-3734 B		TAPE-ELECTRICAL
B		USE AS REQUIRED
E		ORDER BY THE CENTIMETER

Information:

ELECTRICAL AND STARTING SYSTEM

CONTROL GP-GRADE

Special Instruction

Installation of the AccuGrade 2D System for Motor Graders {7220}
Installation of the AccuGrade 2D System for Motor Graders {7220}

AccuGrade® Dealer ARO Installation For M-Series, M-Series 2, and M-Series 3 Motor Graders {7220}
AccuGrade^® Dealer ARO Installation For M-Series, M-Series 2, and M-Series 3 Motor Graders {7220}

Instructions for Installing New Mounting Components for Rotation Sensor on Certain Motor Graders Equipped With Cat® Grade Control{5060, 6151, 7220}
Instructions for Installing New Mounting Components for Rotation Sensor on Certain Motor Graders Equipped With Cat^® Grade Control{5060, 6151, 7220}

Procedure for Installing Stable Blade Attachment on M Series, M Series 2, and 14L Motor Graders {7220}
Procedure for Installing Stable Blade Attachment on M Series, M Series 2, and 14L Motor Graders {7220}

Service Letter-NACD

PRODUCT SUPPORT PROGRAM FOR INSTALLING NEW SOFTWARE ON CERTAIN 120M, 120M 2, 12M, 12M 2, 140M, 140M 2, 14M, 160M, AND 160M 2 MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR INSTALLING NEW SOFTWARE ON CERTAIN 120M, 120M 2, 12M, 12M 2, 140M, 140M 2, 14M, 160M, AND 160M 2 MOTOR GRADERS

Service Letter-Australia

Service Letter-CFEL

Service Letter-CSARL

Service Letter-Americas

Technical Information Bulletin

Grade Control Offset Value Can Be Incorrect On Certain Motor Graders{7220, 7490, 7620}
Grade Control Offset Value Can Be Incorrect On Certain Motor Graders{7220, 7490, 7620}

SNM940 Radio CAN Connection to the Cat® Grade Control or AccuGrade System Could Cause Communication Failure with GNSS System {7220, 733T}
SNM940 Radio CAN Connection to the Cat^® Grade Control or AccuGrade System Could Cause Communication Failure with GNSS System {7220, 733T}

The Cross Slope System is Automatically Enabled when the Advance Control Joysticks are Enabled on Certain Motor Graders {7220, 7490, 7610}
The Cross Slope System is Automatically Enabled when the Advance Control Joysticks are Enabled on Certain Motor Graders {7220, 7490, 7610}

Service Letter-China

Service Letter-Asia

Systems Operation

General Information
Cat^® Grade Control Cross Slope for Motor Graders

Modes of Operation
Cat^® Grade Control Cross Slope for Motor Graders

Display Icons
Cat^® Grade Control Cross Slope for Motor Graders

Menus
Cat^® Grade Control Cross Slope for Motor Graders

System Setup
Cat^® Grade Control Cross Slope for Motor Graders

Normal Operation
Cat^® Grade Control Cross Slope for Motor Graders

General Information
Cat^® Grade Control Cross Slope System for Motor Graders

Service Letter-APD

Testing and Adjusting

Module - Replace
Cat^® Grade Control Cross Slope System for Motor Graders

Module - Flash Program
Cat^® Grade Control Cross Slope System for Motor Graders

Blade Reaction Time - Adjust
Cat^® Grade Control Cross Slope for Motor Graders

Module - Flash Program
Cat^® Grade Control Cross Slope for Motor Graders

Sensor - Adjust - Rotation Sensor
Cat^® Grade Control Cross Slope for Motor Graders

Module - Replace
Cat^® Grade Control Cross Slope for Motor Graders

Full Sensor - Calibrate
Cat^® Grade Control Cross Slope for Motor Graders

Sensor - Adjust - Blade Slope Sensor
Cat^® Grade Control Cross Slope for Motor Graders

Sensor - Adjust - Mainfall Sensor
Cat^® Grade Control Cross Slope for Motor Graders

Sensor - Calibrate
Cat^® Grade Control Cross Slope for Motor Graders

Calibration
Cat^® Grade Control Cross Slope System for Motor Graders

Troubleshooting

Operational Problems
Cat^® Grade Control Cross Slope for Motor Graders

Determining Detected Faults (Electronic Service Tool)
Cat^® Grade Control Cross Slope for Motor Graders

MID 082 - CID 2261 - FMI 02
120M Series 2, 120M2, 12M Series 2, 12M Series II, 140M Series 2 and 160M Series 2 Motor Graders Implement Electronic Control System

MID 082 - CID 2261 - FMI 03
120M Series 2, 120M2, 12M Series 2, 12M Series II, 140M Series 2 and 160M Series 2 Motor Graders Implement Electronic Control System

MID 082 - CID 2261 - FMI 04
120M Series 2, 120M2, 12M Series 2, 12M Series II, 140M Series 2 and 160M Series 2 Motor Graders Implement Electronic Control System

MID 082 - CID 2262 - FMI 02
120M Series 2, 120M2, 12M Series 2, 12M Series II, 140M Series 2 and 160M Series 2 Motor Graders Implement Electronic Control System

MID 082 - CID 2262 - FMI 03
120M Series 2, 120M2, 12M Series 2, 12M Series II, 140M Series 2 and 160M Series 2 Motor Graders Implement Electronic Control System

MID 082 - CID 2262 - FMI 04
120M Series 2, 120M2, 12M Series 2, 12M Series II, 140M Series 2 and 160M Series 2 Motor Graders Implement Electronic Control System

MID 082 - CID 3423 - FMI 13
120M Series 2, 120M2, 12M Series 2, 12M Series II, 140M Series 2 and 160M Series 2 Motor Graders Implement Electronic Control System

Operational Problems
Cat^® Grade Control Cross Slope System for Motor Graders

Service Magazine

New Version 2.08 Firmware for the AccuGrade LR410 Laser Receiver has been released for certain Motor Graders and Track Type Tractors {7009, 7620}
2011/12/23

A New Aid For Checking Correct Installation Of The Increment/Decrement Switch On Certain Motor Graders Equipped With AccuGrade® {0785, 7220, 7332}
2013/02/07

Cat® Grade Control Systems are Now Available as an Aftermarket Kit through the SITECH® Dealer Channel {7220}
2015/09/11