345-7277 DOOR GP-ACCESS -RH S/N M9J1-UP PART OF 331-6048 PANEL GP-SIDE 140M 2 MOTOR GRADER



FRAME AND BODY
DOOR GP
HOOD GP
ENCLOSURE GP
FENDER GP

MOTOR GRADER 140M 2 MOTOR GRADER M9J
 140M Series 2 Motor Grader - All Wheel Drive M9J00001-UP (MACHINE) POWERED BY C9.3 Engine SEBP5060 140M 2 M9J   (2010)

FRAME AND BODY

DOOR GP
DOOR GP-ACCESS
345-1185 DOOR GP-ACCESS
DOOR GP-ACCESS
345-7277 DOOR GP-ACCESS
 

#SEBP50600760
 

345-7277: DOOR GP-ACCESS

345-7277 DOOR GP-ACCESS -RH
S/N M9J1-UP
PART OF 331-6048 PANEL GP-SIDE
i03965853 SEBP5060
3457277 DOOR GP-ACCESS Parts scheme
  For full view, you need register

Parts for your 140M 2 MOTOR GRADER:

Pos. Part No Qty Parts name Comments
1. 305-3153 [1] PAWL  
2. 326-0610 J [1] LATCH AS  
  1H-3244 [4] LOCKWASHER  
  095-1207 M [2] NUT (M12X1.75-THD)  
  326-0612 [2] WASHER-TAB  
  344-5673 M [4] NUT (M6X1-THD)  
3. 332-8835 [2] SCREW  
4. 332-8948 [1] PLATE  
5. [1] DOOR AS-ACCESS  
  344-8017 [1] HINGE AS  
  8T-3612 M [4] NUT-WELD (M8X1.25-THD)  
6. 359-6797 [2] BUMPER AS  
7. 9X-8256 [2] WASHER (6.6X12X2-MM THK)  
  J   REQUIRES CORPORATE KEY
  M   METRIC PART
 

#SEBP50600761
 

320-8138: ENCLOSURE AR-ENGINE

320-8138 ENCLOSURE AR-ENGINE
S/N M9J1-UP
PART OF 353-2924 COMMON AR
i03935749 SEBP5060
3208138 ENCLOSURE AR-ENGINE Parts scheme
  For full view, you need register

Parts for your 140M 2 MOTOR GRADER:

Pos. Part No Qty Parts name Comments
1. 323-3601 Y [1] FASTENER GP-ENCLOSURE  
2. 324-2498 Y [1] ENCLOSURE GP-ENGINE (FRONT)  
3. 325-6280 Y [1] ENCLOSURE GP-ENGINE (REAR)  
4. 332-3602 [1] FASTENER GP-ENCLOSURE  
  3E-9411 [4] WASHER-HARD (17.5X38X6-MM THK)  
  8T-4140 M [4] BOLT (M16X2X60-MM)  
  333-0786 [4] SPACER (18X63.5X20-MM THK)  
5. 353-9394 [1] GRILL  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP50600762
 

324-2498: ENCLOSURE GP-ENGINE

324-2498 ENCLOSURE GP-ENGINE -FRONT
S/N M9J1-UP
PART OF 320-8138 ENCLOSURE AR-ENGINE
i03950190 SEBP5060
3242498 ENCLOSURE GP-ENGINE Parts scheme
  For full view, you need register

Parts for your 140M 2 MOTOR GRADER:

Pos. Part No Qty Parts name Comments
1. 9X-8257 [4] WASHER (17.5X30X3.5-MM THK)  
2. 227-3101 [2] STRIKER AS  
3. 227-3103 [2] PLATE  
4. 295-3839 [2] PAWL  
5. 518-5126 [1] DOOR AS (LH)  
6. 518-5129 [1] DOOR AS (RH)  
7. 326-0610 J [2] LATCH AS  
    (EACH INCLUDES)
  344-5673 M [4] NUT (M6X1-THD)  
  1H-3244 [4] LOCKWASHER  
  095-1207 M [2] NUT (M12X1.75-THD)  
  326-0612 [2] WASHER-TAB  
8. 327-6433 [2] HINGE AS  
9. 443-8173 [2] PLATE-STRIKER  
10. 8K-1433 [2] GROMMET  
11. 440-0108 [2] PANEL  
12. 328-6822 Y [1] ENCLOSURE GP-ENGINE (FRONT)  
13. 332-3604 [8] BUMPER  
14. 345-0105 [2] PLATE  
15. 444-9628 [2] ROD  
16. 354-0650 [1] PLATE  
17. 354-0653 [1] COVER AS  
18. 354-0656 [1] COVER AS  
  294-5046 [2] NUT-WELD  
19. 354-0658 [1] COVER AS  
  8T-3490 M [12] NUT-WELD (M10X1.5-THD)  
  294-5046 [2] NUT-WELD  
21. 5P-8439 [2] GROMMET  
22. 5P-8522 [2] GROMMET  
23. 6P-6256 [4] RETAINER-SPRING  
25. 7X-7729 [16] WASHER (11X25X3-MM THK)  
26. 8T-0389 M [3] LOCKNUT (M10X1.5-THD)  
27. 8T-4121 [28] WASHER-HARD (11X21X2.5-MM THK)  
28. 8T-4132 M [2] NUT (M16X2-THD)  
29. 8T-4172 M [1] BOLT (M10X1.5X80-MM)  
30. 8T-4186 M [3] BOLT (M10X1.5X40-MM)  
31. 8T-4193 M [2] BOLT (M16X2X50-MM)  
32. 8T-4195 M [68] BOLT (M10X1.5X30-MM)  
33. 8T-4222 [28] WASHER-PLATED (11X32X2.5-MM THK)  
34. 4I-7889 [1] SPACER (11X25X45-MM THK)  
  J   REQUIRES CORPORATE KEY
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP50600763
 

325-6280: ENCLOSURE GP-ENGINE

325-6280 ENCLOSURE GP-ENGINE -REAR
S/N M9J1-UP
PART OF 320-8138 ENCLOSURE AR-ENGINE
i03950209 SEBP5060
3256280 ENCLOSURE GP-ENGINE Parts scheme
  For full view, you need register

Parts for your 140M 2 MOTOR GRADER:

Pos. Part No Qty Parts name Comments
1. 331-6047 Y [1] PANEL GP-HOOD  
2. 331-6048 Y [1] PANEL GP-SIDE (RH)  
3. 331-6049 Y [1] PANEL GP-SIDE (LH)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP50600764
 

328-6822: ENCLOSURE GP-ENGINE

328-6822 ENCLOSURE GP-ENGINE -FRONT
S/N M9J1-UP
PART OF 324-2498 ENCLOSURE GP-ENGINE
i03971347 SEBP5060
3286822 ENCLOSURE GP-ENGINE Parts scheme
  For full view, you need register

Parts for your 140M 2 MOTOR GRADER:

Pos. Part No Qty Parts name Comments
1. 327-8710 [1] SUPPORT AS  
2. 328-2956 [1] SUPPORT AS  
3. 467-0291 [1] SUPPORT AS  
4. 467-0298 [1] SUPPORT AS  
5. 329-5406 [1] SUPPORT AS  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
  8T-3597 M [4] NUT-WELD (M12X1.75-THD)  
  8Y-3795 M [1] BOSS (M10X1.5X39-MM)  
6. 440-9224 [1] SUPPORT AS  
  6V-9632 M [2] NUT-WELD (M6X1-THD)  
  8T-3490 M [7] NUT-WELD (M10X1.5-THD)  
  8T-3597 M [4] NUT-WELD (M12X1.75-THD)  
7. 332-3594 [1] POST AS (BOTTOM, RH)  
8. 332-3595 [1] BRACKET AS  
9. 332-3596 [1] POST AS (TOP, RH)  
10. 335-5930 [2] BRACKET  
11. 374-5325 [1] PLATFORM AS  
12. 340-7701 Y [1] BRACKET GP-MOUNTING (CLEAN EMISSIONS MODULE, RH)  
13. 340-7706 Y [1] BRACKET GP-MOUNTING (CLEAN EMISSIONS MODULE, LH)  
14. 354-0642 [1] SUPPORT AS  
15. 361-4354 [1] BRACKET AS  
16. 7X-2549 M [4] BOLT (M12X1.75X100-MM)  
17. 7X-3391 [28] WASHER-HARD (13.5X32X6-MM THK)  
18. 8T-4121 [13] WASHER-HARD (11X21X2.5-MM THK)  
19. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
20. 8T-4137 M [2] BOLT (M10X1.5X20-MM)  
21. 8T-4183 M [8] BOLT (M12X1.75X40-MM)  
22. 8T-4195 M [14] BOLT (M10X1.5X30-MM)  
23. 8T-4223 [8] WASHER-HARD (13.5X25.5X3-MM THK)  
24. 8T-4956 M [24] BOLT (M12X1.75X35-MM)  
25. 7X-7729 [7] WASHER (11X25X3-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP50600765
 

323-3601: FASTENER GP-ENCLOSURE

323-3601 FASTENER GP-ENCLOSURE
S/N M9J1-UP
PART OF 320-8138 ENCLOSURE AR-ENGINE
i03916500 SEBP5060
3233601 FASTENER GP-ENCLOSURE Parts scheme
  For full view, you need register

Parts for your 140M 2 MOTOR GRADER:

Pos. Part No Qty Parts name Comments
1. 7X-1387 [4] WASHER (10.26X22.22X1.9-MM THK)  
2. 8X-1904 [4] SPACER (20X35X26-MM THK)  
3. 155-0576 [28] MOUNT-ISOLATION  
4. 325-6298 [1] PLATE AS  
5. 325-6299 [1] PLATE AS  
6. 329-5417 [1] MOUNT (LH)  
7. 329-6737 [1] MOUNT (RH)  
8. 331-1946 [1] PLATE AS  
9. 331-5275 [1] BRACKET  
10. 331-5276 [1] BRACKET  
11. 332-3578 [14] SPACER (8.2X12.7X22.8-MM THK)  
12. 344-6640 [2] HANDRAIL AS  
13. 345-0104 [2] ROD AS  
14. 345-6639 [8] GASKET  
15. 345-7601 [2] PLATE AS  
16. 345-7603 [2] PLATE AS  
17. 346-8641 [1] PLATE AS  
18. 350-9265 [2] PLATE AS  
19. 350-9266 [2] BRACKET  
20. 435-5165 [2] PLATE AS  
    (EACH INCLUDES)
  8T-3612 M [2] NUT-WELD (M8X1.25-THD)  
21. 444-2188 [14] NUT-CLIP  
22. 099-3649 M [2] BOLT (M8X1.25X40-MM)  
23. 198-4780 [4] WASHER-HARD (17.5X32X8-MM THK)  
24. 302-3908 [2] SPACER (11X20X30-MM THK)  
25. 303-8205 M [2] BOLT (M8X1.25X60-MM)  
26. 344-5674 M [2] NUT (M8X1.25-THD)  
27. 3B-4615 [6] PIN-COTTER  
28. 5P-4116 [8] WASHER-HARD (8.8X20.5X2-MM THK)  
29. 7X-0579 [42] WASHER-HARD (8.8X25.5X2-MM THK)  
30. 7X-0613 [24] WASHER-HARD (8.8X25.5X5-MM THK)  
31. 7X-0818 M [12] BOLT (M8X1.25X45-MM)  
32. 7X-7729 [12] WASHER (11X25X3-MM THK)  
33. 8T-4121 [12] WASHER-HARD (11X21X2.5-MM THK)  
34. 8T-4136 M [8] BOLT (M10X1.5X25-MM)  
35. 8T-4137 M [8] BOLT (M10X1.5X20-MM)  
36. 8T-4140 M [8] BOLT (M16X2X60-MM)  
37. 8T-4175 M [8] BOLT (M16X2X90-MM)  
38. 8T-4193 M [4] BOLT (M16X2X50-MM)  
39. 8T-4195 M [6] BOLT (M10X1.5X30-MM)  
40. 8T-4224 [6] WASHER-HARD (8.8X16X2-MM THK)  
41. 8T-4908 M [12] BOLT (M8X1.25X25-MM)  
42. 8T-5091 M [4] BOLT (M8X1.25X20-MM)  
43. 8T-5093 M [46] BOLT-LOCKING (M8X1.25X25-MM)  
44. 9R-2620 [2] PLUG  
45. 3E-9411 [8] WASHER-HARD (17.5X38X6-MM THK)  
46. 9X-8257 [4] WASHER (17.5X30X3.5-MM THK)  
47. 123-3827 E SEAL (125-CM)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP50600766
 

262-0412: FENDER & SUPPORT GP

262-0412 FENDER & SUPPORT GP -FRONT
S/N M9J1-UP
PART OF 327-4320 ROADING AR
Type 1
FOR USE WITH ALL WHEEL DRIVE ARRANGEMENT
AN ATTACHMENT
i02786761 SEBP5060
2620412 FENDER & SUPPORT GP Parts scheme
  For full view, you need register

Parts for your 140M 2 MOTOR GRADER:

Pos. Part No Qty Parts name Comments
1. 246-3483 [8] PLATE  
2. 246-3486 [2] FENDER  
3. 262-3963 [2] SUPPORT AS  
4. 262-3969 [1] TUBE AS (RH)  
5. 262-3970 [1] TUBE AS (RH)  
6. 262-3971 [1] TUBE AS (LH)  
7. 262-3972 [1] TUBE AS (LH)  
8. 271-3567 M [16] BOLT (M10X1.5X86-MM)  
9. 145-5181 [12] SPACER (13.5X25X12-MM THK)  
10. 6V-9189 M [16] LOCKNUT (M8X1.25-THD)  
11. 8T-4121 [32] WASHER-HARD (11X21X2.5-MM THK)  
12. 8T-4133 M [16] NUT (M10X1.5-THD)  
13. 8T-4183 M [12] BOLT (M12X1.75X40-MM)  
14. 8T-4224 [32] WASHER-HARD (8.8X16X2-MM THK)  
15. 8T-6870 M [16] BOLT (M8X1.25X70-MM)  
16. 313-5270 [2] REFLECTOR (AMBER)  
  M   METRIC PART
 

#SEBP50600767
 

262-0412: FENDER & SUPPORT GP

262-0412 FENDER & SUPPORT GP -FRONT
S/N M9J1-UP
PART OF 327-4320 ROADING AR
Type 2
FOR USE WITH ALL WHEEL DRIVE ARRANGEMENT
AN ATTACHMENT
i06160663 SEBP5060
2620412 FENDER & SUPPORT GP Parts scheme
  For full view, you need register

Parts for your 140M 2 MOTOR GRADER:

Pos. Part No Qty Parts name Comments
1. 246-3483 [8] PLATE  
2. 530-1615 [2] FENDER  
3. 262-3963 [2] SUPPORT AS  
4. 313-5270 [2] REFLECTOR (AMBER)  
5. 449-7711 C [8] SUPPORT  
6. 449-7713 C [2] PLATE  
7. 465-0610 C [1] BRACKET  
8. 465-0611 C [1] BRACKET  
9. 465-0612 C [1] BRACKET  
10. 465-0613 C [1] BRACKET  
11. 465-0614 C [1] BRACKET  
12. 465-0615 C [1] BRACKET  
13. 145-5181 [12] SPACER (13.5X25X12-MM THK)  
14. 344-5675 CM [16] NUT (M10X1.5-THD)  
15. 6V-9189 M [16] LOCKNUT (M8X1.25-THD)  
16. 7X-7729 C [32] WASHER (11X25X3-MM THK)  
17. 8T-3647 CM [16] BOLT (M8X1.25X80-MM)  
18. 8T-4121 C [8] WASHER-HARD (11X21X2.5-MM THK)  
19. 8T-4172 CM [4] BOLT (M10X1.5X80-MM)  
20. 8T-4183 CM [8] BOLT (M12X1.75X40-MM)  
21. 8T-4186 CM [16] BOLT (M10X1.5X40-MM)  
22. 8T-4194 CM [4] BOLT (M12X1.75X50-MM)  
23. 8T-4224 [16] WASHER-HARD (8.8X16X2-MM THK)  
24. 5P-4116 [16] WASHER-HARD (8.8X20.5X2-MM THK)  
25. 6V-7744 M [4] LOCKNUT (M10X1.5-THD)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP50600768
 

262-0413: FENDER & SUPPORT GP

262-0413 FENDER & SUPPORT GP -REAR
S/N M9J1-796
PART OF 353-3315 CONVERSION AR-CERTIFICATION, 327-4320 ROADING AR
AN ATTACHMENT
i02783261 SEBP5060
2620413 FENDER & SUPPORT GP Parts scheme
  For full view, you need register

Parts for your 140M 2 MOTOR GRADER:

Pos. Part No Qty Parts name Comments
1. 190-5386 [2] FILM-IDENTIFICATION (ROUND RED REFLECTIVE)  
2. 333-7446 [1] SUPPORT AS  
3. 333-7447 [1] SUPPORT AS  
4. 333-7448 [1] SUPPORT AS  
5. 333-7449 [1] SUPPORT AS  
6. 251-1140 [2] FENDER  
8. 333-0486 [1] COVER  
9. 284-8450 [10] SUPPORT AS  
10. 333-0492 [1] BRACKET AS  
11. 251-1153 [2] PLATE AS  
    (EACH INCLUDES)
  8T-3612 M [4] NUT-WELD (M8X1.25-THD)  
12. 333-0490 [1] BRACKET AS  
13. 251-2449 [2] PLATE AS  
    (EACH INCLUDES)
  8T-3612 M [5] NUT-WELD (M8X1.25-THD)  
14. 251-4378 [2] FENDER  
15. 333-0493 [2] BRACKET AS  
17. 333-0489 [1] COVER  
18. 7X-0818 M [10] BOLT (M8X1.25X45-MM)  
19. 5P-4116 [44] WASHER-HARD (8.8X20.5X2-MM THK)  
20. 7X-2554 M [4] BOLT (M16X2X70-MM)  
21. 8T-4189 M [20] BOLT (M8X1.25X20-MM)  
22. 8T-4779 M [8] BOLT (M16X2X35-MM)  
23. 8T-4908 M [24] BOLT (M8X1.25X25-MM)  
24. 9X-8257 [12] WASHER (17.5X30X3.5-MM THK)  
25. 7X-7729 [20] WASHER (11X25X3-MM THK)  
26. 8T-4182 M [20] BOLT (M10X1.5X45-MM)  
27. 8T-7934 [10] WASHER-HARD (11X21X5-MM THK)  
28. 8C-9987 [10] WASHER (8.3X28X2.5-MM THK)  
29. 9R-1499 [2] REFLECTOR (RED)  
30. 333-0487 [1] COVER  
31. 333-0488 [1] COVER  
  M   METRIC PART
 

#SEBP50600769
 

262-0413: FENDER & SUPPORT GP

262-0413 FENDER & SUPPORT GP -REAR
S/N M9J797-UP
PART OF 353-3315 CONVERSION AR-CERTIFICATION, 327-4320 ROADING AR
Type 1
AN ATTACHMENT
i05259673 SEBP5060
2620413 FENDER & SUPPORT GP Parts scheme
  For full view, you need register

Parts for your 140M 2 MOTOR GRADER:

Pos. Part No Qty Parts name Comments
1. 178-6450 C [4] SPACER (17X35X30-MM THK)  
2. 502-9305 C [1] SUPPORT AS  
3. 502-9306 C [1] SUPPORT AS  
    (EACH SUPPORT AS INCLUDES)
  8T-3490 M [4] NUT-WELD (M10X1.5-THD)  
  8T-3612 M [3] NUT-WELD (M8X1.25-THD)  
4. 502-9307 C [1] SUPPORT AS  
5. 502-9308 C [1] SUPPORT AS  
    (EACH SUPPORT AS INCLUDES)
  8T-3490 M [6] NUT-WELD (M10X1.5-THD)  
  8T-3612 M [5] NUT-WELD (M8X1.25-THD)  
6. 251-1140 [2] FENDER  
8. 333-0486 [1] COVER  
9. 284-8450 [10] SUPPORT AS  
10. 333-0492 [1] BRACKET AS  
11. 251-1153 [2] PLATE AS  
    (EACH INCLUDES)
  8T-3612 M [4] NUT-WELD (M8X1.25-THD)  
12. 333-0490 [1] BRACKET AS  
13. 251-2449 [2] PLATE AS  
    (EACH INCLUDES)
  8T-3612 M [5] NUT-WELD (M8X1.25-THD)  
14. 251-4378 [2] FENDER  
15. 333-0493 [2] BRACKET AS  
17. 333-0489 [1] COVER  
18. 7X-0818 M [10] BOLT (M8X1.25X45-MM)  
19. 5P-4116 [44] WASHER-HARD (8.8X20.5X2-MM THK)  
20. 7X-2554 M [4] BOLT (M16X2X70-MM)  
21. 8T-4189 M [20] BOLT (M8X1.25X20-MM)  
22. 8T-4779 M [8] BOLT (M16X2X35-MM)  
23. 8T-4908 M [24] BOLT (M8X1.25X25-MM)  
24. 9X-8257 [12] WASHER (17.5X30X3.5-MM THK)  
25. 7X-7729 [20] WASHER (11X25X3-MM THK)  
26. 8T-4182 M [20] BOLT (M10X1.5X45-MM)  
27. 8T-7934 [10] WASHER-HARD (11X21X5-MM THK)  
28. 384-1628 [10] WASHER-HARD (8.8X35X4-MM THK)  
29. 313-5271 [2] REFLECTOR-RED  
30. 333-0487 [1] COVER  
31. 333-0488 [1] COVER  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

Information:

Operation and Maintenance Manual
Access Doors and Covers
120M Series 2, 12M Series 2, 140M Series 2 and 160M Series 2 Motor Graders
Service Magazine
Proper Maintenance Improves Performance of Lock Cylinders {0645, 7273, 7308}
Proper Maintenance Improves Performance of Lock Cylinders {0645, 7273, 7308}

Caterpillar Parts SIS Catalog 140M 2 :

DOOR GP-ACCESS
345-1185 DOOR GP-ACCESS
COWLING GP
331-3322 COWLING GP
COWLING GP
326-4366 COWLING GP
COWLING GP
326-4366 COWLING GP
COVER GP-PROTECTION
323-6970 COVER GP-PROTECTION
COVER GP-CONTROL VALVE
238-1916 COVER GP-CONTROL VALVE
COUNTERWEIGHT GP-FRONT
367-6880 COUNTERWEIGHT GP-FRONT
BRACKET GP-MOUNTING
364-8724 BRACKET GP-MOUNTING
ENCLOSURE AR-ENGINE
320-8138 ENCLOSURE AR-ENGINE
ENCLOSURE GP-ENGINE
324-2498 ENCLOSURE GP-ENGINE
ENCLOSURE GP-ENGINE
325-6280 ENCLOSURE GP-ENGINE
ENCLOSURE GP-ENGINE
328-6822 ENCLOSURE GP-ENGINE
FASTENER GP-ENCLOSURE
323-3601 FASTENER GP-ENCLOSURE
FENDER & SUPPORT GP
262-0412 FENDER & SUPPORT GP
FENDER & SUPPORT GP
262-0412 FENDER & SUPPORT GP
FENDER & SUPPORT GP
262-0413 FENDER & SUPPORT GP

Truck sale:

Caterpillar 140M2, Construction
176,000 
Caterpillar 140M2, Construction
- motor graders
HOLT CAT
Caterpillar 140M2, Construction
164,000 
Caterpillar 140M2, Construction
- motor graders
HOLT CAT
Caterpillar 140M2, Construction
139,800 
Caterpillar 140M2, Construction
- motor graders
FOLEY EQUIPMENT COMPANY
Caterpillar TRADE-IN 140M2, Construction
 
Caterpillar TRADE-IN 140M2, Construction
- motor graders
TRACTORS AND EQUIPMENT (I.T.E.) LTD.
Israel
Caterpillar 140M2, Construction
167,614 
Caterpillar 140M2, Construction
- motor graders
CAVPOWER
Australia