BASIC ENGINE
DAMPER GPDRIVE GP-ACCESSORY
DRIVE GP-FAN
FLYWHEEL GP
GEAR GP
BASIC ENGINE
DAMPER GP
#SEBP50730090
352-7936: DAMPER GP
For full view, you need register
Parts for your 775G TRUCK:
CATERPILLAR SIS#SEBP50730091
295-5209: DRIVE GP-ACCESSORY
For full view, you need register
Parts for your 775G TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 190-3635 | [1] | PULLEY (8-GROOVE) | |
| 2. | 255-1281 M | [4] | BOLT-FLANGE HEAD (M8X1.25X100-MM) | |
| 3. | 305-5385 M | [4] | BOLT (M8X1.25X50-MM) | |
| 4. | 320-1291 Y | [1] | COMPRESSOR GP-REFRIGERANT | |
| 5. | 322-5120 | [1] | BRACKET AS | |
| 8T-3490 M | [1] | NUT-WELD (M10X1.5-THD) | ||
| 8T-3612 M | [1] | NUT-WELD (M8X1.25-THD) | ||
| 6. | 336-8694 | [1] | GUARD | |
| 7. | 342-9964 | [2] | SPACER (6.8X20X50.8-MM THK) | |
| 8. | 342-9969 | [4] | INSERT | |
| 9. | 344-5081 Y | [1] | ALTERNATOR GP-CHARGING (24-VOLT, 115-AMPERE) | |
| 10. | 371-9676 | [1] | BRACKET AS | |
| 8T-3612 M | [1] | NUT-WELD (M8X1.25-THD) | ||
| 11. | 191-6301 M | [2] | STUD-TAPERLOCK (M8X1.25X40-MM) | |
| 12. | 198-4776 | [4] | WASHER-HARD (8.8X20X8-MM THK) | |
| 13. | 374-8480 | [1] | BELT-SERPENTINE (8-GROOVE) | |
| 14. | 8T-4121 | [6] | WASHER-HARD (11X21X2.5-MM THK) | |
| 15. | 8T-6685 M | [4] | BOLT (M10X1.5X110-MM) | |
| 16. | 8T-4136 M | [2] | BOLT (M10X1.5X25-MM) | |
| 17. | 489-2246 | [1] | GUARD AS | |
| 8T-3490 M | [4] | NUT-WELD (M10X1.5-THD) | ||
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP50730092
295-5209: DRIVE GP-ACCESSORY
For full view, you need register
Parts for your 775G TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 190-3635 | [1] | PULLEY (8-GROOVE) | |
| 2. | 255-1281 M | [4] | BOLT-FLANGE HEAD (M8X1.25X100-MM) | |
| 3. | 305-5385 M | [4] | BOLT (M8X1.25X50-MM) | |
| 4. | 472-0559 CY | [1] | COMPRESSOR GP-REFRIGERANT | |
| 5. | 322-5120 | [1] | BRACKET AS | |
| 8T-3490 M | [1] | NUT-WELD (M10X1.5-THD) | ||
| 8T-3612 M | [1] | NUT-WELD (M8X1.25-THD) | ||
| 6. | 336-8694 | [1] | GUARD | |
| 7. | 342-9964 | [2] | SPACER (6.8X20X50.8-MM THK) | |
| 8. | 342-9969 | [4] | INSERT | |
| 9. | 344-5081 Y | [1] | ALTERNATOR GP-CHARGING (24-VOLT, 115-AMPERE) | |
| 10. | 371-9676 | [1] | BRACKET AS | |
| 8T-3612 M | [1] | NUT-WELD (M8X1.25-THD) | ||
| 11. | 191-6301 M | [2] | STUD-TAPERLOCK (M8X1.25X40-MM) | |
| 12. | 198-4776 | [4] | WASHER-HARD (8.8X20X8-MM THK) | |
| 13. | 374-8480 | [1] | BELT-SERPENTINE (8-GROOVE) | |
| 14. | 8T-4121 | [6] | WASHER-HARD (11X21X2.5-MM THK) | |
| 15. | 8T-6685 M | [4] | BOLT (M10X1.5X110-MM) | |
| 16. | 8T-4136 M | [2] | BOLT (M10X1.5X25-MM) | |
| 17. | 489-2246 | [1] | GUARD AS | |
| 8T-3490 M | [4] | NUT-WELD (M10X1.5-THD) | ||
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP50730093
243-1872: DRIVE GP-FAN
For full view, you need register
Parts for your 775G TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 119-4166 Y | [1] | SENSOR GP-SPEED (FAN DRIVE) | |
| 2. | 188-3548 | [1] | KIT-SEAL (FAN CLUTCH) | |
| (INCLUDES WEAR SLEEVES, OIL SEALS, O-RINGS, SEAL RINGS, NAMEPLATE KIT, RETAINER, & BALANCE PLATE) | ||||
| 3. | 314-9289 | [1] | KIT-SERVICE | |
| (INCLUDES BEARINGS, PLATES, SNAP RINGS, SPRING, RETAINING RING, SLEEVE, HUB, SEAL KIT, INSTRUCTIONS, & LOCK PIN) | ||||
| 4. | 533-2005 | [1] | BEARING-SLEEVE | |
| Y | SEPARATE ILLUSTRATION | |||
#SEBP50730094
295-5249: DRIVE GP-FAN
For full view, you need register
Parts for your 775G TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2M-2742 | [1] | PLATE-RETAINER | |
| 2. | 2S-6150 | [1] | COVER-PULLEY | |
| 3. | 6N-3641 | [1] | PULLEY-TIGHTENER | |
| 4. | 8B-2327 | [1] | RING-RETAINING | |
| 5. | 8N-5579 | [1] | RETAINER | |
| 6. | 243-1872 Y | [1] | DRIVE GP-FAN | |
| 7. | 315-8203 | [1] | BRACKET | |
| 8. | 322-5108 | [1] | ARM AS (BELT TIGHTENER) | |
| 8A. | 4N-0955 | [1] | DOWEL | |
| 8B. | 4S-5367 | [1] | BUSHING AS (MOUNT) | |
| 8C. | 8N-4550 | [1] | SHAFT-PULLEY | |
| 9. | 327-2476 | [1] | SPRING AS | |
| 10. | 333-7317 | [1] | PULLEY (3-GROOVE) | |
| 11. | 333-7318 | [1] | ADAPTER-FAN | |
| 12. | 333-7319 | [1] | PULLEY-FAN (3-GROOVE) | |
| 13. | 333-7334 | [1] | BRACKET AS | |
| 4N-0955 | [1] | DOWEL | ||
| 111-4379 | [1] | SHAFT-TIGHTENER | ||
| 14. | 0S-0509 | [1] | BOLT (3/8-16X0.75-IN) | |
| 15. | 1S-8687 | [1] | SPACER (25.5X33.4X31.75-MM THK) | |
| 16. | 2S-6151 | [1] | GASKET | |
| 17. | 2S-6160 | [1] | WASHER-HARD (10.2X32X5-MM THK) | |
| 18. | 3B-4617 | [2] | PIN-COTTER | |
| 19. | 4M-6425 | [4] | BOLT (5/16-18X1-IN) | |
| 20. | 4P-8087 Y | [1] | V-BELT SET (INCLUDES 3-BELTS) | |
| 21. | 4S-5882 | [1] | BOLT (1/2-13X7.25-IN) | |
| 22. | 5M-9735 | [1] | SEAL-LIP TYPE | |
| 23. | 5P-2566 | [6] | BOLT (1/2-13X1.5-IN) | |
| 24. | 5S-7379 | [1] | BOLT (3/8-16X0.875-IN) | |
| 25. | 5S-7382 | [6] | BOLT (3/8-16X1.375-IN) | |
| 26. | 6B-1124 | [2] | BALL BEARING | |
| 27. | 6V-4432 | [4] | BOLT (1/2-13X4-IN) | |
| 28. | 6V-8188 | [1] | NUT (1/2-13-THD) | |
| 29. | 6W-5752 | [2] | PIN | |
| 30. | 7X-0337 | [3] | BOLT (1/2-13X5.75-IN) | |
| 31. | 8T-4223 | [19] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 32. | 8T-4224 | [4] | WASHER-HARD (8.8X16X2-MM THK) | |
| 33. | 8T-4835 | [2] | BOLT (1/2-13X2-IN) | |
| 34. | 8T-4896 | [7] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 35. | 8T-8919 | [2] | BOLT (1/2-13X1.75-IN) | |
| Y | SEPARATE ILLUSTRATION | |||
#SEBP50730095
513-9272: DRIVE GP-FAN
For full view, you need register
Parts for your 775G TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 119-4166 Y | [1] | SENSOR GP-SPEED (FAN DRIVE) | |
| 2. | 188-3548 | [1] | KIT-SEAL (FAN CLUTCH) | |
| (INCLUDES INSTRUCTIONS, WEAR SLEEVES, SEALS, O-RINGS,NAMEPLATE KIT, RETAINER, & BALANCE PLATE) | ||||
| 3. | 513-9273 | [1] | KIT-ENGINE OVERHAUL | |
| (INCLUDES BEARINGS, PLATES, SNAP RINGS, SPRING, RETAINING RING, SLEEVE, HUB, SEAL KIT, INSTRUCTIONS, CLUTCH PLATES, WASHER SPRING & LOCK PIN) | ||||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP50730096
526-2136: DRIVE GP-FAN
For full view, you need register
Parts for your 775G TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2S-6150 | [1] | COVER-PULLEY | |
| 2. | 4P-8087 | [1] | V-BELT SET (INCLUDES 3-BELTS) | |
| 3. | 6N-3641 | [1] | PULLEY-TIGHTENER | |
| 4. | 8N-5579 | [1] | RETAINER | |
| 5. | 8T-6466 M | [8] | BOLT (M10X1.5X60-MM) | |
| 6. | 315-8203 | [1] | BRACKET | |
| 7. | 322-5108 | [1] | ARM AS (BELT TIGHTENER) | |
| 7A. | 4S-5367 | [1] | BUSHING AS (MOUNT) | |
| 4N-0955 | [1] | DOWEL | ||
| 8N-4550 | [1] | SHAFT-PULLEY | ||
| 8. | 327-2476 | [1] | SPRING AS | |
| 9. | 333-7317 | [1] | PULLEY (3-GROOVE) | |
| 10. | 333-7319 | [1] | PULLEY-FAN (3-GROOVE) | |
| 11. | 333-7334 | [1] | BRACKET AS | |
| 4N-0955 | [1] | DOWEL | ||
| 111-4379 | [1] | SHAFT-TIGHTENER | ||
| 12. | 455-0172 | [1] | SPACER-FAN | |
| 13. | 513-9272 Y | [1] | DRIVE GP-FAN | |
| 14. | 516-3853 | [1] | SPIDER AS-FAN (8-BLADE) | |
| 15. | 0S-0509 | [1] | BOLT (3/8-16X0.75-IN) | |
| 16. | 115-6433 | [1] | WASHER (11X50X6-MM THK) | |
| 17. | 198-4777 | [1] | WASHER-HARD (11X25X10-MM THK) | |
| 18. | 1S-8687 | [1] | SPACER (25.5X33.4X31.75-MM THK) | |
| 19. | 2S-6151 | [1] | GASKET | |
| 20. | 2S-6160 | [1] | WASHER-HARD (10.2X32X5-MM THK) | |
| 21. | 3B-4617 | [2] | PIN-COTTER | |
| 22. | 4M-6425 | [4] | BOLT (5/16-18X1-IN) | |
| 23. | 4S-5882 | [1] | BOLT (1/2-13X7.25-IN) | |
| 24. | 5M-9735 | [1] | SEAL-LIP TYPE | |
| 25. | 8T-4835 | [2] | BOLT (1/2-13X2-IN) | |
| 26. | 5S-7382 | [7] | BOLT (3/8-16X1.375-IN) | |
| 27. | 6B-1124 | [2] | BALL BEARING | |
| 28. | 6V-4432 | [4] | BOLT (1/2-13X4-IN) | |
| 29. | 6V-8188 | [1] | NUT (1/2-13-THD) | |
| 30. | 6W-5752 | [2] | PIN | |
| 31. | 7X-0339 | [3] | BOLT (1/2-13X6.25-IN) | |
| 32. | 7X-3391 | [2] | WASHER-HARD (13.5X32X6-MM THK) | |
| 33. | 7X-7729 | [8] | WASHER (11X25X3-MM THK) | |
| 34. | 8B-2327 | [1] | RING-RETAINING | |
| 35. | 8T-4223 | [6] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 36. | 8T-4224 | [4] | WASHER-HARD (8.8X16X2-MM THK) | |
| 37. | 8T-4896 | [6] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 38. | 8T-7971 | [5] | WASHER-HARD (13.5X25.5X5-MM THK) | |
| 39. | 5P-2566 | [2] | BOLT (1/2-13X1.5-IN) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP50730097
344-3881: FLYWHEEL GP
344-3881 FLYWHEEL GP
S/N NHG1-UP
PART OF 318-0382, 334-8171 ENGINE AR-COMPLETE
AN ATTACHMENT
S/N NHG1-UP
PART OF 318-0382, 334-8171 ENGINE AR-COMPLETE
AN ATTACHMENT
For full view, you need register
Parts for your 775G TRUCK:
CATERPILLAR SIS#SEBP50730098
355-2286: GEAR GP-FRONT
355-2286 GEAR GP-FRONT
S/N NHG1-UP
PART OF 346-9547, 346-9548 ENGINE AR-CORE
AN ATTACHMENT
S/N NHG1-UP
PART OF 346-9547, 346-9548 ENGINE AR-CORE
AN ATTACHMENT
For full view, you need register
Parts for your 775G TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3G-2292 | [5] | BOLT-LOCKING (3/8-16X0.87-IN) | |
| 2. | 4N-0342 | [1] | PLATE | |
| 3. | 7N-2443 | [1] | WASHER-THRUST (2.508X3.5X0.188-IN THK) | |
| 4. | 109-3416 | [1] | GEAR (85-TEETH) | |
| 5. | 112-9217 | [1] | PLATE-THRUST | |
| 6. | 117-9712 | [1] | SHAFT-DRIVE IDLER | |
| 7. | 223-9137 | [1] | GEAR AS | |
| 101-3374 | [1] | GEAR (86-TEETH) | ||
| 8. | 475-5915 | [2] | PLATE-SEALING | |
| 9. | 236-4136 | [2] | ADAPTER AS | |
| (EACH INCLUDES) | ||||
| 4N-0684 | [2] | DOWEL | ||
| 10. | 300-5575 | [1] | GEAR AS-IDLER (99/43-TEETH) | |
| 1B-8705 | [1] | KEY-WOODRUFF | ||
| 131-7123 | [1] | BUSHING | ||
| 11. | 352-7936 Y | [2] | DAMPER GP | |
| 12. | 031-5085 | [6] | BOLT-LOCKING (1/4-20X1-IN) | |
| 13. | 0S-0509 | [2] | BOLT (3/8-16X0.75-IN) | |
| 14. | 0S-1571 | [1] | BOLT (3/8-16X1.75-IN) | |
| 15. | 117-8801 | [2] | SEAL-O-RING | |
| 16. | 1B-8705 | [1] | KEY-WOODRUFF | |
| 17. | 1P-7346 | [1] | WASHER-HARD (10.2X35X6-MM THK) | |
| 18. | 2B-2695 | [4] | BOLT (5/16-18X0.875-IN) | |
| 19. | 5E-8771 | [2] | SEAL-O-RING | |
| 20. | 5P-0537 | [6] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 21. | 7K-3116 | [12] | BOLT-12 POINT HEAD (5/8-11X3.5-IN) | |
| Y | SEPARATE ILLUSTRATION | |||
#SEBP50730099
334-2933: GEAR GP-REAR
334-2933 GEAR GP-REAR
S/N NHG1-UP
PART OF 318-0382, 334-8171 ENGINE AR-COMPLETE
AN ATTACHMENT
S/N NHG1-UP
PART OF 318-0382, 334-8171 ENGINE AR-COMPLETE
AN ATTACHMENT
For full view, you need register
Parts for your 775G TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4N-0848 | [1] | SLEEVE-WEAR | |
| 2. | 4N-7183 | [2] | RING-RETAINING | |
| 3. | 5B-0213 | [6] | BOLT (3/8-16X2.375-IN) | |
| 4. | 5F-7403 | [2] | LOCKWASHER | |
| 5. | 5F-7404 | [2] | LOCKNUT-BEARING | |
| 6. | 5P-1370 | [2] | BEARING AS-ROLLER | |
| 416-2164 AB | BEARING AS-ROLLER | |||
| 7. | 102-5861 | [2] | PLATE-THRUST | |
| 8. | 185-1497 | [1] | GEAR AS-IDLER (79-TEETH) | |
| 8A. | 224-9664 | [1] | BUSHING | |
| 9. | 224-1219 | [1] | SHAFT-STUB | |
| 10. | 224-1220 | [1] | PLATE | |
| 11. | 224-1221 | [1] | SHAFT-STUB | |
| 12. | 475-5915 | [2] | PLATE-SEALING | |
| 13. | 224-9657 | [2] | ADAPTER AS | |
| (EACH INCLUDES) | ||||
| 4N-0684 | [1] | DOWEL | ||
| 14. | 226-6036 | [1] | GEAR AS-IDLER (40/70-TEETH) | |
| 1B-8705 | [1] | KEY-WOODRUFF | ||
| 14A. | 226-6052 | [1] | BUSHING | |
| 15. | 227-0159 | [1] | SHAFT-STUB | |
| 16. | 228-5813 | [1] | GEAR AS-CRANKSHAFT (49-TEETH) | |
| 4N-0684 | [1] | DOWEL | ||
| 17. | 228-5814 | [2] | GEAR AS-IDLER (37-TEETH) | |
| (EACH INCLUDES) | ||||
| 17A. | 209-8621 | [1] | BEARING | |
| 18. | 229-1663 | [1] | PLATE-THRUST | |
| 19. | 230-6202 | [1] | GEAR AS-IDLER (70/83-TEETH) | |
| 19A. | 224-9664 | [1] | BUSHING | |
| 209-8622 B | [1] | BUSHING | ||
| 20. | 253-2642 | [1] | GEAR-HYDRAULIC PUMP DRIVE (48-TEETH) | |
| 21. | 253-2643 | [1] | GEAR-HYDRAULIC PUMP DRIVE (48-TEETH) | |
| 22. | 541-0869 | [2] | SHAFT-STUB | |
| 23. | 331-6188 | [2] | GEAR AS-CAMSHAFT (56-TEETH) | |
| (EACH INCLUDES) | ||||
| 323-5665 | [1] | PIN-DOWEL | ||
| 24. | 352-0140 I | [2] | HOSE AS | |
| 25. | 367-0773 | [2] | ADAPTER-PUMP | |
| 26. | 031-5085 | [6] | BOLT-LOCKING (1/4-20X1-IN) | |
| 27. | 117-8801 | [2] | SEAL-O-RING | |
| 28. | 136-7227 | [2] | SEAL-O-RING | |
| 29. | 1A-2029 | [4] | BOLT (3/8-16X1.125-IN) | |
| 30. | 1T-0720 | [12] | BOLT-12 POINT HEAD (3/8-16X1.25-IN) | |
| 31. | 214-7568 | [2] | SEAL-O-RING | |
| 32. | 245-3804 | [1] | BOLT (3/8-16X3.5-IN) | |
| 33. | 297-7956 | [2] | ELBOW (INCLUDES SCREEN FILTER) | |
| 34. | 5E-8771 | [2] | SEAL-O-RING | |
| 35. | 5P-4318 | [2] | ELBOW | |
| 36. | 5P-8429 | [2] | SEAL-O-RING | |
| 37. | 6J-3913 | [12] | BOLT-12 POINT HEAD (5/8-11X3.25-IN) | |
| 38. | 502-4034 | [1] | SEAL-O-RING | |
| 39. | 7B-3235 | [8] | BOLT (1/2-13X1.375-IN) | |
| 40. | 7K-6058 | [12] | BOLT-12 POINT HEAD (1/2-13X2.5-IN) | |
| 41. | 8M-2530 | [16] | BOLT-12 POINT HEAD (1/2-13X1.25-IN) | |
| A | NOT PART OF THIS GROUP | |||
| B | USE AS REQUIRED | |||
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
